Core Changes:
- drm/print: add drm_print_hex_dump()
Driver Changes:
- HDCP fixes and updates for Xe3lpd and for HDCP 1.4 (Suraj)
- Add dedicated lock for each sideband (Jani)
- New GSC FW for ARL-H and ARL-U (Daniele)
- Add support for 3 VDSC engines 12 slices (Ankit)
- Sanitize MBUS joining (Ville)
- Fixes in DP MST (Imre)
- Stop using pixel_format_from_register_bits() to parse VBT (Ville)
- Declutter CDCLK code (Ville)
- PSR clean up and fixes (Jouni, Jani, Animesh)
- DMC wakelock - Fixes and enablement for Xe3_LPD (Gustavo)
- Demote source OUI read/write failure logging to debug (Jani)
- Potential boot oops fix and some general cleanups (Ville)
- Scaler code cleanups (Ville)
- More conversion towards struct intel_display and general cleanups (Jani)
- Limit max compressed bpp to 18 when forcing DSC (Ankit)
- Start to reconcile i915's and xe's display power mgt sequences (Rodrigo)
- Some correction in the DP Link Training sequence (Arun)
- Avoid setting YUV420_MODE in PIPE_MISC on Xe3lpd (Ankit)
- MST and DDI cleanups and refactoring (Jani)
- Fixed an typo in i915_gem_gtt.c (Zhang)
- Try to make DPT shrinkable again (Ville)
- Try to fix CPU MMIO fails during legacy LUT updates (Ville)
- Some PPS cleanups (Ville, Jani)
- Use seq buf for printing rates (Jani)
- Flush DMC wakelock release work at the end of runtime suspend (Gustavo)
- Fix NULL pointer dereference in capture_engine (Eugene)
- Fix memory leak by correcting cache object name in error handler (Jiasheng)
- Small refactor in WM/DPKGC for modifying latency programmed into PKG_C_LATENCY (Suraj)
- Add drm_printer based hex dumper and use it (Jani)
- Move g4x code to specific g4x functions (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
[sima: conflict in intel_dp_mst.c due to conversion to
drm_connector_dynamic_init that landed through drm-misc]
Link: https://patchwork.freedesktop.org/patch/msgid/Z1n4VhatZpvT5xKs@intel.com
Add a optional properties to change LVDS output voltage. This should not
be static as this depends mainly on the connected display voltage
requirement. We have three properties:
- "ti,lvds-termination-ohms", which sets near end termination,
- "ti,lvds-vod-swing-data-microvolt" and
- "ti,lvds-vod-swing-clock-microvolt" which both set LVDS differential
output voltage for data and clock lanes. They are defined as an array
with min and max values. The appropriate bitfield will be set if
selected constraints can be met.
If "ti,lvds-termination-ohms" is not defined the default of 200 Ohm near
end termination will be used. Selecting only one:
"ti,lvds-vod-swing-data-microvolt" or
"ti,lvds-vod-swing-clock-microvolt" can be done, but the output voltage
constraint for only data/clock lanes will be met. Setting both is
recommended.
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241216085410.1968634-3-andrej.picej@norik.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216085410.1968634-3-andrej.picej@norik.com
Add basic DisplayPort audio support.
Support non-live audio playback from two PCMs (DMA channels), and the
volume control in the audio mixer.
As older dtb files may not have the audio DMA channels defined, the
driver will just mark the audio support as disabled if the audio DMA is
missing, and will continue with only display support.
Note: Reset doesn't seem to work (ZYNQMP_DISP_AUD_SOFT_RESET). If we do
a reset, audio playback won't start again even if, afaics, we do set up
all the necessary registers. So, at the moment, resetting the audio
block in dp_dai_hw_free() is commented out.
Tested-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023-xilinx-dp-audio-v4-3-5128881457be@ideasonboard.com
The DP subsystem for ZynqMP supports audio via two channels, and the DP
DMA has dma-engines for those channels. For some reason the DT binding
has not specified those channels, even if the picture included in
xlnx,zynqmp-dpsub.yaml shows "2 x aud" DMAs.
This hasn't caused any issues as the drivers have not supported audio,
and has thus gone unnoticed.
To make it possible to add the audio support to the driver, add the two
audio DMAs to the binding. While strictly speaking this is an ABI break,
there should be no regressions caused by this as we're adding new
entries at the end of the dmas list, and, after the audio support has
been added in "arm64: dts: zynqmp: Add DMA for DP audio", the driver
will treat the audio DMAs as optional to also support the old bindings.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023-xilinx-dp-audio-v4-1-5128881457be@ideasonboard.com
If IH primary ring and KFD ih fifo overflows, we may miss CP, SDMA
interrupts and cause application soft hang. Show warning message with
ring name if overflow happens.
Add function to get ih ring name to avoid duplicating it. To keep
warning message consistent between GPU generations, change all
*_ih.c except ASICs older than Vega which has only one ih ring.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If event slot is not signaled, kfd_signal_event_interrupt goes to slow
path to scan all event slots to find the signaled event, this is needed
for old ASICs that don't have the event ID or the event IDs are
incorrect in the IH payload.
There is case that GPU signal the same event twice, then driver process
the first event interrupt, set_event and event slot is auto-reset, then
for the second event interrupt, KFD goes to slow path as event is not
signaled, just drop the second event interrupt because the application
only need wakeup once.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For CPX mode, each KFD node has interrupt worker to process ih_fifo to
send events to user space. Currently all interrupt workers of same adev
queue to same CPU, all workers execution are actually serialized and
this cause KFD ih_fifo overflow when CPU usage is high.
Use per-GPU unbounded highpri queue with number of workers equals to
number of partitions, let queue_work select the next CPU round robin
among the local CPUs of same NUMA.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After GPU page fault, there are lots of page fault interrupts generated
at short period even with CAM filter enabled because the fault address
is different. Each page fault copy to KFD ih fifo to send event to user
space by KFD interrupt worker, this could cause KFD ih fifo overflow
while other processes generate events at same time.
KFD process is aborted after GPU page fault, we only need one GPU page
fault interrupt sent to KFD ih fifo to send memory exception event to
user space.
Incease KFD ih fifo size to 2 times of IH primary ring size, to handle
the burst events case.
This patch handle the gfx v9 path, cover retry on/off and CAM filter
on/off cases.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To handle 40000 to 80000 interrupts per second running CPX mode with 4
streams/queues per KFD node, KFD interrupt handler becomes the
performance bottleneck.
Remove the kfifo_out memcpy overhead by accessing ih_fifo data in-place
and updating rptr with kfifo_skip_count.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This partially reverts commit 194eb174cb.
This commit introduced a new state variable into adev without even
remotely worrying about CPU barriers.
Since we already have the amdgpu_in_reset() function exactly for this
use case partially revert that.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sdma context empty interrupt is dropped in amdgpu_irq_dispatch
as unregistered interrupt src_id 243, this interrupt accounts to 1/3 of
total interrupts and causes IH primary ring overflow when running
stressful benchmark application. Disable this interrupt has no side
effect found.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The use of 1 << i in scheduler mask calculations can result in an
unintentional integer overflow due to the expression being
evaluated as a 32-bit signed integer.
This patch replaces 1 << i with 1ULL << i to ensure the operation
is performed as a 64-bit unsigned integer, preventing overflow
Discovered in coverity scan, CID 1636393, 1636175, 1636007, 1635853
Fixes: c5c63d9cb5 ("drm/amdgpu: add amdgpu_gfx_sched_mask and amdgpu_compute_sched_mask debugfs")
Signed-off-by: Karol Przybylski <karprzy7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Seamless boot skips MPC init for the active pipe, resulting in stale MPC
rate control state being retained. This will cause issues since other
logic assumes it is disabled (as DCN30 and newer does not need it).
[How]
Disable MPC rate control on ODM pipe update to cover the seamless boot
case.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 87b7ebc2e1.
A long time ago, we had an issue with the Raven system when it was
connected to two displays: one with DP and another with HDMI. After the
system woke up from suspension, we saw a solid green screen caused by an
underflow generated by bad DCC metadata. To workaround this issue, the
'commit 87b7ebc2e1 ("drm/amd/display: Fix green screen issue after
suspend")' was introduced to disable the DCC for a few frames after in
the resume phase. However, in hindsight, this solution was probably a
workaround at the kernel level for some issues from another part
(probably other driver components or user space). After applying this
patch and trying to reproduce the green issue in a similar hardware
system but using the latest kernel and userspace, we cannot see the
issue, which makes this workaround obsolete and creates extra
unnecessary complexity to the code; for all of this reason, this commit
reverts the original change.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Some fields in struct dc_link_settings and link_training_settings are
not initialized and using them can cause unexpected results.
[HOW]
Initialize struct dc_link_settings and link_training_settings to zero.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Dropping the entirety of dml2_policy_build_synthetic_soc_states exposes
an issue for states that cannot be filled via bbox_overrides and rely on
the default parameters that may or may not be present depending on the
DM.
For amdgpu_dm this results in missing parameters for most of the struct
in higher states:
- sr_exit_time_us
- sr_enter_plus_exit_time_us
- sr_exit_z8_time_us
- sr_enter_plus_exit_z8_time_us
- urgent_latency_pixel_data_only_us
- urgent_latency_pixel_mixed_with_vm_data_us
- urgent_latency_vm_data_only_us
- dram_clock_change_latency_us
- fclk_change_latency_us
- usr_retraining_latency_us
- writeback_latency_us
- urgent_latency_adjustment_fabric_clock_component_us
- urgent_latency_adjustment_fabric_clock_reference_mhz
- dscclk_mhz
- phyclk_mhz
- phyclk_d18_mhz
- phyclk_d32_mhz
- use_ideal_dram_bw_strobe
[How]
Copy from the first state, applying a minimal policy to set max clocks
for SOC independent values.
Then copy the SOC dependent ones from the states modified by
bbox_overrides.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When effective bandwidth from the SoC is enough to perform SubVP
prefetchs, then DF throttling is not required.
[HOW]
Provide SMU the required clocks for which DF throttling is not required.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Source --> DP2.1 MST hub --> DP1.4/2.1 monitor
When change from DP1.4 to DP2.1 from monitor manual, modes higher than
4k120 are all cutoff by mode validation. Switch back to DP1.4 gets all
the modes up to 4k240 available to be enabled by dsc passthrough.
[why]
Compared to DP1.4 link from hub to monitor, DP2.1 link has larger
full_pbn value that causes overflow in the process of doing conversion
from pbn to kbps.
[how]
Change the data type accordingly to fit into the data limit during
conversion calculation.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current driver interface does not allow for flexibility in coexistence
of multiple interface versions, so add support for checking minor
interface revisions and providing appropriate programming.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Driver has different ways to fetch VBIOS. If one of the methods doesn't
find an authentic one, it will show misleading info messages eventhough
a subsequent method finds a valid VBIOS. Keep the message level at debug
and add device context.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
