Panel power off delay is the time the panel power needs to remain off
after being switched off, before it can be switched on again.
For the purpose of respecting panel power off delay at driver probe,
assuming the panel was last switched off at driver probe is overly
pessimistic. If the panel was never on, we'd end up waiting for no
reason.
We don't know what has happened before kernel boot, but we can make some
assumptions:
- The panel may have been switched off right before kernel boot by some
pre-os environment.
- After kernel boot, the panel may only be switched off by i915.
- At i915 driver probe, only a previously loaded and removed i915 may
have switched the panel power off.
With these assumptions, we can initialize the last power off time to
kernel boot time, if we also ensure i915 driver remove waits for the
panel power off delay after switching panel power off.
This shaves off the time it takes from kernel boot to i915 probe from
the first panel enable, if (and only if) the panel was not already
enabled at boot.
The encoder destroy hook is pretty much the last place where we can
wait, right after we've ensured the panel power has been switched off,
and before the whole encoder is destroyed.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7417
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116150657.1347504-1-jani.nikula@intel.com
struct gvt_firmware_header has a crc32 member in which all members that
come after the that field are used to calculate it. The previous
implementation added the value '4' (crc32's u32 size) to calculate the
crc32_start offset which came across as a bit cryptic until you take a
deeper look at the struct.
This patch changes crc32_start offset to the 'version' member which is
the first member of the struct gvt_firmware_header after crc32.
It's worth mentioning that doing a build before/after this patch results
in no binary output differences.
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20221030033628.GA279284@mail.google.com
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Some functions seem to have been renamed without updating the kernel-doc
markup causing warnings. Also, struct intel_vgpu_dmabuf_obj is not
properly documented, but has a kerneld-doc markup.
Fix those warnings:
drivers/gpu/drm/i915/gvt/aperture_gm.c:308: warning: expecting prototype for inte_gvt_free_vgpu_resource(). Prototype was for intel_vgpu_free_resource() instead
drivers/gpu/drm/i915/gvt/aperture_gm.c:344: warning: expecting prototype for intel_alloc_vgpu_resource(). Prototype was for intel_vgpu_alloc_resource() instead
drivers/gpu/drm/i915/gvt/cfg_space.c:257: warning: expecting prototype for intel_vgpu_emulate_cfg_read(). Prototype was for intel_vgpu_emulate_cfg_write() instead
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'vgpu' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'info' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'dmabuf_id' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'kref' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'initref' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'list' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/handlers.c:3066: warning: expecting prototype for intel_t_default_mmio_write(). Prototype was for intel_vgpu_default_mmio_write() instead
drivers/gpu/drm/i915/gvt/mmio_context.c:560: warning: expecting prototype for intel_gvt_switch_render_mmio(). Prototype was for intel_gvt_switch_mmio() instead
drivers/gpu/drm/i915/gvt/page_track.c:131: warning: expecting prototype for intel_vgpu_enable_page_track(). Prototype was for intel_vgpu_disable_page_track() instead
drivers/gpu/drm/i915/gvt/vgpu.c:215: warning: expecting prototype for intel_gvt_active_vgpu(). Prototype was for intel_gvt_activate_vgpu() instead
drivers/gpu/drm/i915/gvt/vgpu.c:230: warning: expecting prototype for intel_gvt_deactive_vgpu(). Prototype was for intel_gvt_deactivate_vgpu() instead
drivers/gpu/drm/i915/gvt/vgpu.c:358: warning: expecting prototype for intel_gvt_destroy_vgpu(). Prototype was for intel_gvt_destroy_idle_vgpu() instead
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/375c0c0ca2ef414f25e14f274457f77373a9268d.1657699522.git.mchehab@kernel.org
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
These are fixes from Lyude, and were meant to have been included in the
last round of drm-next patches.
- Fix some nasty memory issues that broke Lyude's display:
- 0 initialize both nvif args and parsed HDMI infoframe buffers
- Fixed missing memset(…, 0, …) for nvif args before sending VSI
infoframe
- Fixed incorrect data pointer and size in nvkm_uoutp_mthd_infoframe()
(was previously pointing at the start of the nvif_outp_infoframe_args
struct instead of at the start of the infoframe data
- Get rid of duplicated scdc assignments, since we only use it to write the
scdc registers
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Turns out many of the files that need i915_reg.h get it implicitly via
{display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h
-> i915_reg.h. Since i915_trace.h doesn't actually need i915_irq.h,
makes sense to drop it, but that requires adding quite a few new
includes all over the place.
Prefer including i915_reg.h where needed instead of adding another
implicit include, because eventually we'll want to split up i915_reg.h
and only include the specific registers at each place.
Also some places actually needed i915_irq.h too.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e78a2e0ac1bffaf5af3b5ccc21dff05e6518cef.1668008071.git.jani.nikula@intel.com
Currently when opeating in split gamma mode we do the
"skip ever other sw LUT entry" trick in the low level
LUT programming/readout functions. That is very annoying
and a big hinderance to revamping the color management
uapi.
Let's get rid of that problem by making half sized copies
of the software LUTs and plugging those into the internal
{pre,post}_csc_lut attachment points (instead of the sticking
the uapi provide sw LUTs there directly).
With this the low level stuff will operate purely in terms
the hardware LUT sizes, and all uapi nonsense is contained
to the atomic check phase. The one thing we do lose is
intel_color_assert_luts() since we no longer have a way to
check that the uapi LUTs were correctly used when generating
the internal copies. But that seems like a price worth paying.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-12-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
This is the pull request for a whole bunch of fixes and prep-work that
was done to support Ampere acceleration prior to GSP-RM being
available. It uses the ACR firmware released by NVIDIA in
linux-firmware, as we do on earlier GPUs. The work to support running
on top of GSP-RM also heavily depends on various pieces of this
series.
In addition to the new HW support, general stability of the driver
should be improved, especially around recovering HW from bugs that can
be generated by userspace driver components.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA==s+nZD0n7CuRWLPE=Pj+02CN13r+ZQJxoHQ_EmR+o=XQ@mail.gmail.com
We weren't sending the high bits, though they're zero currently anyway.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
NVIDIA provided this on Turing, but we kept using the hardcoded version
from Volta (where they didn't).
Switch to the firmware version prior to Ampere.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Essentially ripped verbatim from NVGPU, comments and all, and adapted to
nvkm's structs and style.
- maybe fixes an nvgpu bug though, a small tweak was needed to match RM
v2:
- remove unnecessary WARN_ON
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
We'll want to reuse the former for loading from proper netlist images.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
We're going to be pulling in a chunk of code from NVGPU to fixup our
SMID mappings on Volta and above, which depends on ppc_nr[gpc]
reflecting the actual number of PPCs present, not the maximum number.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
