The r8188eu driver does no longer access rf path b registers via
PHYRegDef.
Change the PHYRegDef array in struct hal_data_8188e to a single
variable that holds the register addresses for rf path a. Remove
the initialisation of path b register addresses.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3b011b097c ("staging: r8188eu: limit rf register writes to
path a") limits rf register writes by private ioctls to RF_PATH_A.
Apart from private ioctls, the rest of the driver uses only path a.
This patch limits rf register reads by the private ioctl 0x0D, which
calls rtw_wx_read_rf, to path a.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3b011b097c ("staging: r8188eu: limit rf register writes to
path a") limited the rtw_wx_write_rf function to write only rf registers
for path a.
The private ioctl 0x0B invokes the rtw_dbg_port function. This ioctl
can also be used for writing rf registers. We should limit these register
writes to rf path a as well.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We've already limited the rtw_wx_write_rf function to RF_PATH_A in commit
3b011b097c ("staging: r8188eu: limit rf register writes to path a").
Set RF_PATH_A explicitly when we call rtl8188e_PHY_SetRFReg. This will
make it easier later to verify that all callers of rtl8188e_PHY_SetRFReg
use path a.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
checkpatch.pl emits the following warning:
CHECK: Prefer kzalloc(sizeof(*pcmd)...) over kzalloc(sizeof(struct cmd_obj)...)
+ pcmd = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
CHECK: Prefer kzalloc(sizeof(*psetkeyparm)...) over kzalloc(sizeof(struct setkey_parm)...)
+ psetkeyparm = kzalloc(sizeof(struct setkey_parm), GFP_KERNEL).
According to the above "CHECK[S]", use the preferred style in the two kzalloc()
of rtw_set_key().
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20220208180426.27455-2-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device needs data about the antenna configuration. This information
in provided by PDS (Platform Data Set, this is the wording used in WF200
documentation) files.
Until now, the driver had to parse the PDS file before to send it. This
solution was not acceptable for the vanilla kernel. We have slightly
changed the PDS format so it is now an array of Type-Length-Value.
This patch allows to support new format and keep compatibility with
legacy format.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
probe: allow new PDS format
Link: https://lore.kernel.org/r/20220211162659.528333-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull Kbuild fixes from Masahiro Yamada:
- Fix the truncated path issue for HAVE_GCC_PLUGINS test in Kconfig
- Move -Wunsligned-access to W=1 builds to avoid sprinkling warnings
for the latest Clang
- Fix missing fclose() in Kconfig
- Fix Kconfig to touch dep headers correctly when KCONFIG_AUTOCONFIG is
overridden.
* tag 'kbuild-fixes-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix failing to generate auto.conf
kconfig: fix missing fclose() on error paths
Makefile.extrawarn: Move -Wunaligned-access to W=1
kconfig: let 'shell' return enough output for deep path names
Pull irq fixes from Thomas Gleixner:
"Interrupt chip driver fixes:
- Don't install an hotplug notifier for GICV3-ITS on systems which do
not need it to prevent a warning in the notifier about inconsistent
state
- Add the missing device tree matching for the T-HEAD PLIC variant so
the related SoC is properly supported"
* tag 'irq-urgent-2022-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Add missing thead,c900-plic match string
dt-bindings: update riscv plic compatible string
irqchip/gic-v3-its: Skip HP notifier when no ITS is registered
Pull objtool fix from Borislav Petkov:
"Fix a case where objtool would mistakenly warn about instructions
being unreachable"
* tag 'objtool_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bug: Merge annotate_reachable() into _BUG_FLAGS() asm
Pull scheduler fix from Borislav Petkov:
"Fix a NULL-ptr dereference when recalculating a sched entity's weight"
* tag 'sched_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix fault in reweight_entity
Pull perf fix from Borislav Petkov:
"Prevent cgroup event list corruption when switching events"
* tag 'perf_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix list corruption in perf_cgroup_switch()
Pull x86 fix from Borislav Petkov:
"Prevent softlockups when tearing down large SGX enclaves"
* tag 'x86_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Silence softlockup detection when releasing large enclaves
Pull cifs fixes from Steve French:
"Three small smb3 reconnect fixes and an error log clarification"
* tag '5.17-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: mark sessions for reconnection in helper function
cifs: call helper functions for marking channels for reconnect
cifs: call cifs_reconnect when a connection is marked
[smb3] improve error message when mount options conflict with posix
Pull irqchip fixes from Marc Zyngier:
- Don't register a hotplug notifier on GICv3 systems that advertise
LPI support, but have no ITS to make use of it
- Add missing DT matching for the thead,c900-plic variant of the
SiFive PLIC
Link: https://lore.kernel.org/r/20220211110038.1179155-1-maz@kernel.org
Pull SCSI fixes from James Bottomley:
"Two minor fixes in the lpfc driver. One changing the classification of
trace messages and the other fixing a build issue when NVME_FC is
disabled"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Reduce log messages seen after firmware download
scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled
Pull char/misc driver fixes from Greg KH:
"Here are a small number of char/misc driver fixes for 5.17-rc4 for
reported issues. They contain:
- phy driver fixes
- iio driver fix
- eeprom driver fix
- speakup regression fix
- fastrpc fix
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL
speakup-dectlk: Restore pitch setting
bus: mhi: pci_generic: Add mru_default for Cinterion MV31-W
bus: mhi: pci_generic: Add mru_default for Foxconn SDX55
eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX
misc: fastrpc: avoid double fput() on failed usercopy
phy: dphy: Correct clk_pre parameter
phy: phy-mtk-tphy: Fix duplicated argument in phy-mtk-tphy
phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable()
phy: xilinx: zynqmp: Fix bus width setting for SGMII
phy: cadence: Sierra: fix error handling bugs in probe()
phy: ti: Fix missing sentinel for clk_div_table
phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option
phy: usb: Leave some clocks running during suspend
Pullstaging driver fixes from Greg KH:
"Here are two staging driver fixes for 5.17-rc4. These are:
- fbtft error path fix
- vc04_services rcu dereference fix
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: fbtft: Fix error path in fbtft_driver_module_init()
staging: vc04_services: Fix RCU dereference check
Pull tty/serial fixes from Greg KH:
"Here are four small tty/serial fixes for 5.17-rc4. They are:
- 8250_pericom change revert to fix a reported regression
- two speculation fixes for vt_ioctl
- n_tty regression fix for polling
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt_ioctl: add array_index_nospec to VT_ACTIVATE
vt_ioctl: fix array_index_nospec in vt_setactivate
serial: 8250_pericom: Revert "Re-enable higher baud rates"
n_tty: wake up poll(POLLRDNORM) on receiving data
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.17-rc4 that resolve some
reported issues and add new device ids:
- usb-serial new device ids
- ulpi cleanup fixes
- f_fs use-after-free fix
- dwc3 driver fixes
- ax88179_178a usb network driver fix
- usb gadget fixes
There is a revert at the end of this series to resolve a build problem
that 0-day found yesterday. Most of these have been in linux-next,
except for the last few, and all have now passed 0-day tests"
* tag 'usb-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"
usb: dwc2: drd: fix soft connect when gadget is unconfigured
usb: gadget: rndis: check size of RNDIS_MSG_SET command
USB: gadget: validate interface OS descriptor requests
usb: core: Unregister device on component_add() failure
net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup
usb: dwc3: gadget: Prevent core from processing stale TRBs
USB: serial: cp210x: add CPI Bulk Coin Recycler id
USB: serial: cp210x: add NCR Retail IO box id
USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320
usb: gadget: f_uac2: Define specific wTerminalType
usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transition
usb: raw-gadget: fix handling of dual-direction-capable endpoints
usb: usb251xb: add boost-up property support
usb: ulpi: Call of_node_put correctly
usb: ulpi: Move of_node_put to ulpi_dev_release
USB: serial: option: add ZTE MF286D modem
USB: serial: ch341: add support for GW Instek USB2.0-Serial devices
usb: f_fs: Fix use-after-free for epfile
usb: dwc3: xilinx: fix uninitialized return value
Pull s390 updates from Vasily Gorbik:
"Maintainers and reviewers changes:
- Add Alexander Gordeev as maintainer for s390.
- Christian Borntraeger will focus on s390 KVM maintainership and
stays as s390 reviewer.
Fixes:
- Fix clang build of modules loader KUnit test.
- Fix kernel panic in CIO code on FCES path-event when no driver is
attached to a device or the driver does not provide the path_event
function"
* tag 's390-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: verify the driver availability for path_event call
s390/module: fix building test_modules_helpers.o with clang
MAINTAINERS: downgrade myself to Reviewer for s390
MAINTAINERS: add Alexander Gordeev as maintainer for s390
Pull xen fixes from Juergen Gross:
- Two small cleanups
- Another fix for addressing the EFI framebuffer above 4GB when running
as Xen dom0
- A patch to let Xen guests use reserved bits in MSI- and IO-APIC-
registers for extended APIC-IDs the same way KVM guests are doing it
already
* tag 'for-linus-5.17a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pci: Make use of the helper macro LIST_HEAD()
xen/x2apic: Fix inconsistent indenting
xen/x86: detect support for extended destination ID
xen/x86: obtain full video frame buffer address for Dom0 also under EFI
