The fields 'priority' and 'mode_selection' in struct typec_altmode are
missing from the kernel-doc comment, which results in warnings when
building the documentation with 'make htmldocs'.
WARNING: ./include/linux/usb/typec_altmode.h:44 struct member 'priority' not described in 'typec_altmode'
WARNING: ./include/linux/usb/typec_altmode.h:44 struct member 'mode_selection' not described in 'typec_altmode'
Document both fields to keep the kernel-doc comment aligned with the
structure definition.
Signed-off-by: Aldo Conte <aldocontelk@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260311163320.61534-1-aldocontelk@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a port is disabled, an attached device will be disconnected. This
causes a port-status-change event, which will race with hub autosuspend
(if the disabled port was the only connected port on its hub), causing
an immediate resume and a second autosuspend. Both of these can be
avoided by adding a short delay after the call to
usb_hub_set_port_power().
Below log shows what is happening:
$ echo 1 > usb1-port1/disable
[ 37.958239] usb 1-1: USB disconnect, device number 2
[ 37.964101] usb 1-1: unregistering device
[ 37.970070] hub 1-0:1.0: hub_suspend
[ 37.971305] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 37.974412] usb usb1: bus auto-suspend, wakeup 1
[ 37.988175] usb usb1: suspend raced with wakeup event <---
[ 37.993947] usb usb1: usb auto-resume
[ 37.998401] hub 1-0:1.0: hub_resume
[ 38.105688] usb usb1-port1: status 0000, change 0000, 12 Mb/s
[ 38.112399] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 38.118645] hub 1-0:1.0: hub_suspend
[ 38.122963] usb usb1: bus auto-suspend, wakeup 1
[ 38.200368] usb usb1: usb wakeup-resume
[ 38.204982] usb usb1: usb auto-resume
[ 38.209376] hub 1-0:1.0: hub_resume
[ 38.213676] usb usb1-port1: status 0101 change 0001
[ 38.321552] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 38.327978] usb usb1-port1: status 0101, change 0000, 12 Mb/s
[ 38.457429] usb 1-1: new high-speed USB device number 3 using ci_hdrc
Then, port change bit will be fixed to the final state and
usb_clear_port_feature() can correctly clear it after this period. This
will also avoid usb runtime suspend routine to run because
usb_autopm_put_interface() not run yet.
Fixes: f061f43d74 ("usb: hub: port: add sysfs entry to switch port power")
Cc: stable@kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260316095042.1559882-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB core only relaxes the default PM_QOS_FLAG_NO_POWER_OFF policy when
an upstream hub reports switchable port power. That misses internal
ports whose power is managed by platform firmware instead of the USB
hub descriptor.
Allow the port-poweroff policy to be exposed for hard-wired ports with
an ACPI-managed power resource. The existing runtime PM path still
requires the child usage count to drop and remote wakeup to be clear
before it will power the port down.
This lets internal devices such as CNVi Bluetooth use the existing USB
ACPI runtime power path even when the root hub reports no USB-standard
port power switching.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Link: https://patch.msgid.link/20260315223433.23452-1-sean@starlabs.systems
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of "shrinking" the allocation by kmalloc()ing a new, smaller
buffer, utilize krealloc() to shrink the existing allocation. This saves
a memcpy(), as well as eliminates the temporary `smallbuf` allocation,
which guards against allocation failure under extreme memory pressure.
Signed-off-by: Bence Csókás <bence98@sch.bme.hu>
Link: https://patch.msgid.link/20260315-usb-krealloc-v2-1-32f83e090409@sch.bme.hu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk_enable() may fail according to the API contract.
Previously, udc_enable() ignored its return value and returned void.
Modify udc_enable() to return the error code. Additionally, update
all of its callers (pxa_udc_pullup, pxa_udc_vbus_session,
pxa27x_udc_start, pxa_udc_probe, and pxa_udc_resume) to check
this return value and handle the failure properly with necessary
cleanups or rollbacks.
Signed-off-by: Zhaoyang Yu <2426767509@qq.com>
Link: https://patch.msgid.link/tencent_46693FE6DB434ACFB7412B16F6078AC01A06@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver saves the minor number it gets upon registration
in its descriptor for debugging purposes. However, there is
inevitably a window between registration and saving the correct
minor in a descriptor. During this window the debugging output
will be wrong.
As wrong debug output is worse than no debug output, just
remove it.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260312094619.1590556-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver core holds a reference to the USB device while it is bound to a
driver and there is no need to take additional references unless the
structure is needed after disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305133851.2952-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver core holds a reference to the USB device while it is bound to a
driver and there is no need to take additional references unless the
structure is needed after disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://patch.msgid.link/20260305133851.2952-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull SCSI fixes from James Bottomley:
"The one core change is a re-roll of the tag allocation fix from the
last pull request that uses the correct goto to unroll all the
allocations. The remianing fixes are all small ones in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hisi_sas: Fix NULL pointer exception during user_scan()
scsi: qla2xxx: Completely fix fcport double free
scsi: ufs: core: Fix SError in ufshcd_rtc_work() during UFS suspend
scsi: core: Fix error handling for scsi_alloc_sdev()
Pull probes fixes from Masami Hiramatsu:
- Avoid crash when rmmod/insmod after ftrace killed
This fixes a kernel crash caused by kprobes on the symbol in a module
which is unloaded after ftrace_kill() is called.
- Remove unneeded warnings from __arm_kprobe_ftrace()
Remove unneeded WARN messages which can be triggered if the kprobe is
using ftrace and it fails to enable the ftrace. Since kprobes
correctly handle such failure, we don't need to warn it.
* tag 'probes-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Remove unneeded warnings from __arm_kprobe_ftrace()
kprobes: avoid crash when rmmod/insmod after ftrace killed
Pull bootconfig fixes from Masami Hiramatsu:
- fix off-by-one in xbc_verify_tree() unclosed brace error. This fixes
a wrong error place in unclosed brace error message
- check bounds before writing in __xbc_open_brace(). This fixes to
check the array index before setting array, so that the bootconfig
can support 16th-depth nested brace correctly
- fix snprintf truncation check in xbc_node_compose_key_after(). This
fixes to handle the return value of snprintf() correctly in case of
the return value == size
- Add bootconfig tests about braces Add test cases for checking error
position about unclosed brace and ensuring supporting 16th depth
nested braces correctly
* tag 'bootconfig-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Add bootconfig tests about braces
lib/bootconfig: fix snprintf truncation check in xbc_node_compose_key_after()
lib/bootconfig: check bounds before writing in __xbc_open_brace()
lib/bootconfig: fix off-by-one in xbc_verify_tree() unclosed brace error
Pull kvm fixes from Paolo Bonzini:
"Quite a large pull request, partly due to skipping last week and
therefore having material from ~all submaintainers in this one. About
a fourth of it is a new selftest, and a couple more changes are large
in number of files touched (fixing a -Wflex-array-member-not-at-end
compiler warning) or lines changed (reformatting of a table in the API
documentation, thanks rST).
But who am I kidding---it's a lot of commits and there are a lot of
bugs being fixed here, some of them on the nastier side like the
RISC-V ones.
ARM:
- Correctly handle deactivation of interrupts that were activated
from LRs. Since EOIcount only denotes deactivation of interrupts
that are not present in an LR, start EOIcount deactivation walk
*after* the last irq that made it into an LR
- Avoid calling into the stubs to probe for ICH_VTR_EL2.TDS when pKVM
is already enabled -- not only thhis isn't possible (pKVM will
reject the call), but it is also useless: this can only happen for
a CPU that has already booted once, and the capability will not
change
- Fix a couple of low-severity bugs in our S2 fault handling path,
affecting the recently introduced LS64 handling and the even more
esoteric handling of hwpoison in a nested context
- Address yet another syzkaller finding in the vgic initialisation,
where we would end-up destroying an uninitialised vgic with nasty
consequences
- Address an annoying case of pKVM failing to boot when some of the
memblock regions that the host is faulting in are not page-aligned
- Inject some sanity in the NV stage-2 walker by checking the limits
against the advertised PA size, and correctly report the resulting
faults
PPC:
- Fix a PPC e500 build error due to a long-standing wart that was
exposed by the recent conversion to kmalloc_obj(); rip out all the
ugliness that led to the wart
RISC-V:
- Prevent speculative out-of-bounds access using array_index_nospec()
in APLIC interrupt handling, ONE_REG regiser access, AIA CSR
access, float register access, and PMU counter access
- Fix potential use-after-free issues in kvm_riscv_gstage_get_leaf(),
kvm_riscv_aia_aplic_has_attr(), and kvm_riscv_aia_imsic_has_attr()
- Fix potential null pointer dereference in
kvm_riscv_vcpu_aia_rmw_topei()
- Fix off-by-one array access in SBI PMU
- Skip THP support check during dirty logging
- Fix error code returned for Smstateen and Ssaia ONE_REG interface
- Check host Ssaia extension when creating AIA irqchip
x86:
- Fix cases where CPUID mitigation features were incorrectly marked
as available whenever the kernel used scattered feature words for
them
- Validate _all_ GVAs, rather than just the first GVA, when
processing a range of GVAs for Hyper-V's TLB flush hypercalls
- Fix a brown paper bug in add_atomic_switch_msr()
- Use hlist_for_each_entry_srcu() when traversing mask_notifier_list,
to fix a lockdep warning; KVM doesn't hold RCU, just irq_srcu
- Ensure AVIC VMCB fields are initialized if the VM has an in-kernel
local APIC (and AVIC is enabled at the module level)
- Update CR8 write interception when AVIC is (de)activated, to fix a
bug where the guest can run in perpetuity with the CR8 intercept
enabled
- Add a quirk to skip the consistency check on FREEZE_IN_SMM, i.e. to
allow L1 hypervisors to set FREEZE_IN_SMM. This reverts (by
default) an unintentional tightening of userspace ABI in 6.17, and
provides some amount of backwards compatibility with hypervisors
who want to freeze PMCs on VM-Entry
- Validate the VMCS/VMCB on return to a nested guest from SMM,
because either userspace or the guest could stash invalid values in
memory and trigger the processor's consistency checks
Generic:
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from
being unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite
being rather unintuitive
Selftests:
- Increase the maximum number of NUMA nodes in the guest_memfd
selftest to 64 (from 8)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: selftests: Verify SEV+ guests can read and write EFER, CR0, CR4, and CR8
Documentation: kvm: fix formatting of the quirks table
KVM: x86: clarify leave_smm() return value
selftests: kvm: add a test that VMX validates controls on RSM
selftests: kvm: extract common functionality out of smm_test.c
KVM: SVM: check validity of VMCB controls when returning from SMM
KVM: VMX: check validity of VMCS controls when returning from SMM
KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated
KVM: SVM: Initialize AVIC VMCB fields if AVIC is enabled with in-kernel APIC
KVM: x86: Introduce KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM
KVM: x86: Fix SRCU list traversal in kvm_fire_mask_notifiers()
KVM: VMX: Fix a wrong MSR update in add_atomic_switch_msr()
KVM: x86: hyper-v: Validate all GVAs during PV TLB flush
KVM: x86: synthesize CPUID bits only if CPU capability is set
KVM: PPC: e500: Rip out "struct tlbe_ref"
KVM: PPC: e500: Fix build error due to using kmalloc_obj() with wrong type
KVM: selftests: Increase 'maxnode' for guest_memfd tests
KVM: arm64: pkvm: Don't reprobe for ICH_VTR_EL2.TDS on CPU hotplug
KVM: arm64: vgic: Pick EOIcount deactivations from AP-list tail
KVM: arm64: Remove the redundant ISB in __kvm_at_s1e2()
...
Pull powerpc fixes from Madhavan Srinivasan:
- Fix KUAP warning in VMX usercopy path
- Fix lockdep warning during PCI enumeration
- Fix to move CMA reservations to arch_mm_preinit
- Fix to check current->mm is alive before getting user callchain
Thanks to Aboorva Devarajan, Christophe Leroy (CS GROUP), Dan Horák,
Nicolin Chen, Nilay Shroff, Qiao Zhao, Ritesh Harjani (IBM), Saket Kumar
Bhaskar, Sayali Patil, Shrikanth Hegde, Venkat Rao Bagalkote, and Viktor
Malik.
* tag 'powerpc-7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/iommu: fix lockdep warning during PCI enumeration
powerpc/selftests/copyloops: extend selftest to exercise __copy_tofrom_user_power7_vmx
powerpc: fix KUAP warning in VMX usercopy path
powerpc, perf: Check that current->mm is alive before getting user callchain
powerpc/mem: Move CMA reservations to arch_mm_preinit
Pull x86 fix from Ingo Molnar:
"Work around S2RAM hang if the firmware unexpectedly re-enables the
x2apic hardware while it was disabled by the kernel.
Force-disable it again and issue a warning into the syslog"
* tag 'x86-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Disable x2apic on resume if the kernel expects so
Pull timer fix from Ingo Molnar:
"Fix function tracer recursion bug by marking jiffies_64_to_clock_t()
notrace"
* tag 'timers-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/jiffies: Mark jiffies_64_to_clock_t() notrace
Pull scheduler fixes from Ingo Molnar:
"More MM-CID fixes, mostly fixing hangs/races:
- Fix CID hangs due to a race between concurrent forks
- Fix vfork()/CLONE_VM MMCID bug causing hangs
- Remove pointless preemption guard
- Fix CID task list walk performance regression on large systems
by removing the known-flaky and slow counting logic using
for_each_process_thread() in mm_cid_*fixup_tasks_to_cpus(), and
implementing a simple sched_mm_cid::node list instead"
* tag 'sched-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/mmcid: Avoid full tasklist walks
sched/mmcid: Remove pointless preempt guard
sched/mmcid: Handle vfork()/CLONE_VM correctly
sched/mmcid: Prevent CID stalls due to concurrent forks
Pull objtool fixes from Ingo Molnar:
- Fix cross-build bug by using HOSTCFLAGS for HAVE_XXHASH test
- Fix klp bug by fixing detection of corrupt static branch/call entries
- Handle unsupported pr_debug() usage more gracefully
- Fix hypothetical klp bug by avoiding NULL pointer dereference when
printing code symbol name
- Fix data alignment bug in elf_add_data() causing mangled strings
- Fix confusing ERROR_INSN() error message
- Handle unexpected Clang RSP musical chairs causing false positive
warnings
- Fix another objtool stack overflow in validate_branch()
* tag 'objtool-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix another stack overflow in validate_branch()
objtool: Handle Clang RSP musical chairs
objtool: Fix ERROR_INSN() error message
objtool: Fix data alignment in elf_add_data()
objtool: Use HOSTCFLAGS for HAVE_XXHASH test
objtool/klp: Avoid NULL pointer dereference when printing code symbol name
objtool/klp: Disable unsupported pr_debug() usage
objtool/klp: Fix detection of corrupt static branch/call entries
Pull irq fixes from Ingo Molnar:
"Two fixes for the riscv-aplic irqchip driver:
- Fix probing dependency bug on probing failure
- Fix double register_syscore() bug"
* tag 'irq-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-aplic: Register syscore operations only once
irqchip/riscv-aplic: Do not clear ACPI dependencies on probe failure
Pull i3c fixes from Alexandre Belloni:
"This introduces the I3C_OR_I2C symbol which is not a fix per se but is
affecting multiple subsystems so it is included to ease
synchronization.
Apart from that, Adrian is mostly fixing the mipi-i3c-hci driver DMA
handling, and I took the opportunity to add two fixes for the dw-i3c
driver.
Subsystem:
- simplify combined i3c/i2c dependencies
Drivers:
- dw: handle 2C properly, fix possible race condition
- mipi-i3c-hci: many DMA related fixes"
* tag 'i3c/fixes-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: dw-i3c-master: Set SIR_REJECT in DAT on device attach and reattach
i3c: master: dw-i3c: Fix missing of_node for virtual I2C adapter
i3c: mipi-i3c-hci: Fallback to software reset when bus disable fails
i3c: mipi-i3c-hci: Fix handling of shared IRQs during early initialization
i3c: mipi-i3c-hci: Fix race in DMA error handling in interrupt context
i3c: mipi-i3c-hci: Consolidate common xfer processing logic
i3c: mipi-i3c-hci: Restart DMA ring correctly after dequeue abort
i3c: mipi-i3c-hci: Add missing TID field to no-op command descriptor
i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue
i3c: mipi-i3c-hci: Fix race between DMA ring dequeue and interrupt handler
i3c: mipi-i3c-hci: Fix race in DMA ring dequeue
i3c: mipi-i3c-hci: Fix race in DMA ring enqueue for parallel xfers
i3c: mipi-i3c-hci: Consolidate spinlocks
i3c: mipi-i3c-hci: Factor out DMA mapping from queuing path
i3c: mipi-i3c-hci: Fix Hot-Join NACK
i3c: mipi-i3c-hci: Use ETIMEDOUT instead of ETIME for timeout errors
i3c: simplify combined i3c/i2c dependencies
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Remap paths to avoid absolute ones starting with the upcoming Rust
1.95.0 release. This improves build reproducibility, avoids leaking
the exact path and avoids having the same path appear in two forms
The approach here avoids remapping debug information as well, in
order to avoid breaking tools that used the paths to access source
files, which was the previous attempt that needed to be reverted
- Allow 'unused_features' lint for the upcoming Rust 1.96.0 release.
While well-intentioned, we do not benefit much from the new lint
- Emit dependency information into '$(depfile)' directly to avoid a
temporary '.d' file (it was an old approach)
'kernel' crate:
- 'str' module: fix warning under '!CONFIG_BLOCK' by making
'NullTerminatedFormatter' public
- 'cpufreq' module: suppress false positive Clippy warning
'pin-init' crate:
- Remove '#[disable_initialized_field_access]' attribute which was
unsound. This means removing the support for structs with unaligned
fields (through the 'repr(packed)' attribute), for now
And document the load-bearing fact of field accessors (i.e. that
they are required for soundness)
- Replace shadowed return token by 'unsafe'-to-create token in order
to remain sound in the face of the likely upcoming Type Alias Impl
Trait (TAIT) and the next trait solver in upstream Rust"
* tag 'rust-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: kbuild: allow `unused_features`
rust: cpufreq: suppress clippy::double_parens in Policy doctest
rust: pin-init: replace shadowed return token by `unsafe`-to-create token
rust: pin-init: internal: init: document load-bearing fact of field accessors
rust: pin-init: internal: init: remove `#[disable_initialized_field_access]`
rust: build: remap path to avoid absolute path
rust: kbuild: emit dep-info into $(depfile) directly
rust: str: make NullTerminatedFormatter public
Pull USB fixes from Greg KH:
"Here is a large chunk of USB driver fixes for 7.0-rc4. Included in
here are:
- usb gadget reverts due to reported issues, and then a follow-on fix
to hopefully resolve the reported overall problem
- xhci driver fixes
- dwc3 driver fixes
- usb core "killable" bulk message api addition to fix a usbtmc
driver bug where userspace could hang the driver for forever
- small USB driver fixes for reported issues
- new usb device quirks
All except the last USB device quirk change have been in linux-next
with no reported issues. That one came in too late, and is 'obviously
correct' :)"
* tag 'usb-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
USB: ezcap401 needs USB_QUIRK_NO_BOS to function on 10gbs usb speed
usb: roles: get usb role switch from parent only for usb-b-connector
Revert "tcpm: allow looking for role_sw device in the main node"
usb: gadget: f_ncm: Fix net_device lifecycle with device_move
Revert "usb: gadget: u_ether: add gether_opts for config caching"
Revert "usb: gadget: u_ether: use <linux/hex.h> header file"
Revert "usb: gadget: u_ether: Add auto-cleanup helper for freeing net_device"
Revert "usb: gadget: f_ncm: align net_device lifecycle with bind/unbind"
Revert "usb: legacy: ncm: Fix NPE in gncm_bind"
Revert "usb: gadget: f_ncm: Fix atomic context locking issue"
usb: typec: altmode/displayport: set displayport signaling rate in configure message
usb: dwc3: pci: add support for the Intel Nova Lake -H
usb/core/quirks: Add Huawei ME906S-device to wakeup quirk
usb: gadget: uvc: fix interval_duration calculation
xhci: Fix NULL pointer dereference when reading portli debugfs files
usb: xhci: Prevent interrupt storm on host controller error (HCE)
usb: xhci: Fix memory leak in xhci_disable_slot()
usb: class: cdc-wdm: fix reordering issue in read code path
usb: renesas_usbhs: fix use-after-free in ISR during device removal
usb: cdc-acm: Restore CAP_BRK functionnality to CH343
...
Pull char / misc / IIO driver fixes from Greg KH:
"Here are some char/misc/iio/binder fixes for 7.0-rc4. Nothing major in
here, just the usual:
- lots of iio driver fixes for reported issues
- rust binder fixes for problems found
- gpib driver binding to the wrong device fix
- firmware driver fix
All of these have been in linux-next with no reported issues"
* tag 'char-misc-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (28 commits)
gpib: lpvo_usb: fix unintended binding of FTDI 8U232AM devices
firmware: stratix10-svc: Add Multi SVC clients support
rust_binder: use lock_vma_under_rcu() in use_page_slow()
rust_binder: call set_notification_done() without proc lock
rust_binder: avoid reading the written value in offsets array
rust_binder: check ownership before using vma
rust_binder: fix oneway spam detection
firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled
iio: imu: adis: Fix NULL pointer dereference in adis_init
iio: imu: inv_icm45600: fix regulator put warning when probe fails
iio: buffer: Fix wait_queue not being removed
iio: gyro: mpu3050-core: fix pm_runtime error handling
iio: gyro: mpu3050-i2c: fix pm_runtime error handling
iio: adc: ad7768-1: Fix ERR_PTR dereference in ad7768_fill_scale_tbl
iio: chemical: sps30_serial: fix buffer size in sps30_serial_read_meas()
iio: chemical: sps30_i2c: fix buffer size in sps30_i2c_read_meas()
iio: magnetometer: tlv493d: remove erroneous shift in X-axis data
iio: proximity: hx9023s: Protect against division by zero in set_samp_freq
iio: proximity: hx9023s: fix assignment order for __counted_by
iio: chemical: bme680: Fix measurement wait duration calculation
...
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 7.0-rc4 that resolve
some reported problems. They are:
- two rtl8723bs data validation bugfixes
- sm750fb removal path bugfix
All of these have been in linux-next for many weeks with no reported
issues"
* tag 'staging-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie
staging: rtl8723bs: properly validate the data in rtw_get_ie_ex()
staging: sm750fb: add missing pci_release_region on error and removal
Pull drm fixes from Dave Airlie:
"The weekly drm fixes. This is mostly msm fixes across the functions,
with amdgpu and i915. It also has a core rust fix and changes in
nova-core to take advantage of it, and otherwise just has some minor
driver fixes, and marks loongsoon as orphaned.
rust:
- Fix safety issue in dma_read! and dma_write!
nova-core:
- Fix UB in DmaGspMem pointer accessors
- Fix stack overflow in GSP memory allocation
loongsoon:
- mark drm driver as unmaintained
msm:
- Core:
- Adjusted msm_iommu_pagetable_prealloc_allocate() allocation type
- DPU:
- Fixed blue screens on Hamoa laptops by reverting the LM
reservation
- Fixed the size of the LM block on several platforms
- Dropped usage of %pK (again)
- Fixed smatch warning on SSPP v13+ code
- Fixed INTF_6 interrupts on Lemans
- DSI:
- Fixed DSI PHY revision on Kaanapali
- Fixed pixel clock calculation for the bonded DSI mode panels
with compression enabled
- DT bindings:
- Fixed DisplayPort description on Glymur
- Fixed model name in SM8750 MDSS schema
- GPU:
- Added MODULE_DEVICE_TABLE to the GPU driver
- Fix bogus protect error on X2-85
- Fix dma_free_attrs() buffer size
- Gen8 UBWC fix for Glymur
i915:
- Avoid hang when configuring VRR [icl]
- Fix sg_table overflow with >4GB folios
- Fix PSR Selective Update handling
- Fix eDP ALPM read-out sequence
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bringup hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
amdkfd:
- Fix missing BO unreserve in an error path
ivpu:
- drop unnecessary bootparams register setting
amdxdna:
- fix runtime/suspend resume deadlock
bridge:
- ti-sn65dsi83: fix DSI rounding and dual LVDS
gud:
- fix NULL crtc dereference on display disable"
* tag 'drm-fixes-2026-03-14' of https://gitlab.freedesktop.org/drm/kernel: (44 commits)
drm/amd: Set num IP blocks to 0 if discovery fails
drm/amdkfd: Unreserve bo if queue update failed
drm/amd/display: Check for S0i3 to be done before DCCG init on DCN21
drm/amd/display: Add missing DCCG register entries for DCN20-DCN316
gpu: nova-core: gsp: fix UB in DmaGspMem pointer accessors
drm/loongson: Mark driver as orphaned
accel/amdxdna: Fix runtime suspend deadlock when there is pending job
gpu: nova-core: fix stack overflow in GSP memory allocation
accel/ivpu: Remove boot params address setting via MMIO register
drm/i915/dp: Read ALPM caps after DPCD init
drm/i915/psr: Write DSC parameters on Selective Update in ET mode
drm/i915/dsc: Add helper for writing DSC Selective Update ET parameters
drm/i915/dsc: Add Selective Update register definitions
drm/i915/psr: Repeat Selective Update area alignment
drm/i915: Fix potential overflow of shmem scatterlist length
drm/i915/vrr: Configure VRR timings after enabling TRANS_DDI_FUNC_CTL
drm/bridge: ti-sn65dsi83: halve horizontal syncs for dual LVDS output
drm/bridge: ti-sn65dsi83: fix CHA_DSI_CLK_RANGE rounding
drm/gud: fix NULL crtc dereference on display disable
drm/sitronix/st7586: fix bad pixel data due to byte swap
...
Pull workqueue fixes from Tejun Heo:
- Improve workqueue stall diagnostics: dump all busy workers (not just
running ones), show wall-clock duration of in-flight work items, and
add a sample module for reproducing stalls
- Fix POOL_BH vs WQ_BH flag namespace mismatch in pr_cont_worker_id()
- Rename pool->watchdog_ts to pool->last_progress_ts and related
functions for clarity
* tag 'wq-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Rename show_cpu_pool{s,}_hog{s,}() to reflect broadened scope
workqueue: Add stall detector sample module
workqueue: Show all busy workers in stall diagnostics
workqueue: Show in-flight work item duration in stall diagnostics
workqueue: Rename pool->watchdog_ts to pool->last_progress_ts
workqueue: Use POOL_BH instead of WQ_BH when checking pool flags
Pull cgroup fixes from Tejun Heo:
- Hide PF_EXITING tasks from cgroup.procs to avoid exposing dead tasks
that haven't been removed yet, fixing a systemd timeout issue on
PREEMPT_RT
- Call rebuild_sched_domains() directly in CPU hotplug instead of
deferring to a workqueue, fixing a race where online/offline CPUs
could briefly appear in stale sched domains
* tag 'cgroup-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Don't expose dead tasks in cgroup
cgroup/cpuset: Call rebuild_sched_domains() directly in hotplug
Pull sched_ext fixes from Tejun Heo:
- Fix data races flagged by KCSAN: add missing READ_ONCE()/WRITE_ONCE()
annotations for lock-free accesses to module parameters and dsq->seq
- Fix silent truncation of upper 32 enqueue flags (SCX_ENQ_PREEMPT and
above) when passed through the int sched_class interface
- Documentation updates: scheduling class precedence, task ownership
state machine, example scheduler descriptions, config list cleanup
- Selftest fix for format specifier and buffer length in
file_write_long()
* tag 'sched_ext-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use WRITE_ONCE() for the write side of scx_enable helper pointer
sched_ext: Fix enqueue_task_scx() truncation of upper enqueue flags
sched_ext: Documentation: Update sched-ext.rst
sched_ext: Use READ_ONCE() for scx_slice_bypass_us in scx_bypass()
sched_ext: Documentation: Mention scheduling class precedence
sched_ext: Document task ownership state machine
sched_ext: Use READ_ONCE() for lock-free reads of module param variables
sched_ext/selftests: Fix format specifier and buffer length in file_write_long()
sched_ext: Use WRITE_ONCE() for the write side of dsq->seq update
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix stale build ID in module MMAP2 records in events synthesized for
pre-existing processes
- Fix rust cross compilation
- hashmap__new() error pointer return handling fixes
- Fix off-by-one bug in outside of functions check on the disasm code
- Update header copies of kernel headers, including prctl.h, mount.h,
fs.h, irq_vectors.h, perf_event.h, gfp_types.h, kvm.h, cpufeatures.h
msr-index.h, also the syscall tables files that introduced the
'rseq_slice_yield' syscall
- Finish removal of ETM_OPT_* on the ARM coresight support, needed to
sync the coresight-pmu.h header with the kernel sources
- Make in-target rule robust against too long argument error
* tag 'perf-tools-fixes-for-v7.0-1-2026-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (22 commits)
perf synthetic-events: Fix stale build ID in module MMAP2 records
perf annotate loongarch: Fix off-by-one bug in outside check
perf ftrace: Fix hashmap__new() error checking
perf annotate: Fix hashmap__new() error checking
perf cs-etm: Sync coresight-pmu.h header with the kernel sources
perf cs-etm: Finish removal of ETM_OPT_*
tools headers UAPI: Update tools' copy of linux/coresight-pmu.h
tools headers: Update the syscall tables and unistd.h, to support the new 'rseq_slice_yield' syscall
perf disasm: Fix off-by-one bug in outside check
tools arch x86: Sync msr-index.h to pick MSR_{OMR_[0-3],CORE_PERF_GLOBAL_STATUS_SET}
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers: Update the linux/gfp_types.h copy with the kernel sources
perf beauty: Update the linux/perf_event.h copy with the kernel sources
perf beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources
perf beauty: Sync UAPI linux/fs.h with kernel sources
perf beauty: Sync linux/mount.h copy with the kernel sources
tools build: Fix rust cross compilation
perf build: Prevent "argument list too long" error
...
Pull s390 fixes from Vasily Gorbik:
- Revert IRQ entry/exit path optimization that incorrectly cleared
some PSW bits before irqentry_exit(), causing boot failures with
linux-next and HRTIMER_REARM_DEFERRED (which only uncovered the
problem)
- Fix zcrypt code to show CCA card serial numbers even when the
default crypto domain is offline by selecting any domain available,
preventing empty sysfs entries
* tag 's390-7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Enable AUTOSEL_DOM for CCA serialnr sysfs attribute
s390: Revert "s390/irq/idle: Remove psw bits early"
Pull ceph fixes from Ilya Dryomov:
"A small pile of CephFS and messenger bug fixes, all marked for stable"
* tag 'ceph-for-7.0-rc4' of https://github.com/ceph/ceph-client:
libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply()
libceph: Use u32 for non-negative values in ceph_monmap_decode()
MAINTAINERS: update email address of Dongsheng Yang
libceph: reject preamble if control segment is empty
libceph: admit message frames only in CEPH_CON_S_OPEN state
libceph: prevent potential out-of-bounds reads in process_message_header()
ceph: do not skip the first folio of the next object in writeback
ceph: fix memory leaks in ceph_mdsc_build_path()
ceph: add a bunch of missing ceph_path_info initializers
ceph: fix i_nlink underrun during async unlink
Pull xfs fixes from Carlos Maiolino:
"A couple race fixes found on the new healthmon mechanism, and another
flushing dquots during filesystem shutdown"
* tag 'xfs-fixes-7.0-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix integer overflow in bmap intent sort comparator
xfs: fix undersized l_iclog_roundoff values
xfs: ensure dquot item is deleted from AIL only after log shutdown
xfs: remove redundant set null for ip->i_itemp
xfs: fix returned valued from xfs_defer_can_append
xfs: Remove redundant NULL check after __GFP_NOFAIL
xfs: fix race between healthmon unmount and read_iter
xfs: remove scratch field from struct xfs_gc_bio
Pull smb client fixes from Steve French:
- Fix reconnect when using non-default port
- Fix default retransmission behavior
- Fix open handle reuse in cifs_open
- Fix export for smb2-mapperror-test
- Fix potential corruption on write retry
- Fix potentially uninitialized superblock flags
- Fix missing O_DIRECT and O_SYNC flags on create
* tag 'v7.0-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: make default value of retrans as zero
smb: client: fix open handle lookup in cifs_open()
smb: client: fix iface port assignment in parse_server_interfaces
smb/client: only export symbol for 'smb2maperror-test' module
smb: client: fix in-place encryption corruption in SMB2_write()
smb: client: fix sbflags initialization
smb: client: fix atomic open with O_DIRECT & O_SYNC
Pull spi fixes from Mark Brown:
"A couple of device ID and quirk updates, plus a bunch of small fixes
most of which (other than the Cadence one) are unremarkable error
handling fixes"
* tag 'spi-fix-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: atcspi200: Handle invalid buswidth and fix compiler warning
spi: dt-bindings: sun6i: Allow Dual SPI and Quad SPI for newer SoCs
spi: intel-pci: Add support for Nova Lake mobile SPI flash
spi: cadence-qspi: Fix requesting of APB and AHB clocks on JH7110
spi: rockchip-sfc: Fix double-free in remove() callback
spi: atcspi200: Fix double-free in atcspi_configure_dma()
spi: amlogic: spifc-a4: Fix DMA mapping error handling
Pull regulator fixes from Mark Brown:
"A couple of small driver specific fixes for pca9450, cleaning up
logging and fixing warnings due to confusion with interrupt type"
* tag 'regulator-fix-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: pca9450: Correct probed name for PCA9452
regulator: pca9450: Correct interrupt type
