The pin assignment is only relevant in case the PHY is owned by the
display, that is in legacy and DP-alt mode. In TBT-alt mode the PHY is
owned by the TBT FW/driver and so the pin assignment/configuration is
managed by those components. A follow-up change will cache the pin
assignment value in all the TypeC modes - querying this by calling
get_pin_assignment() - prepare for that here, by reporting pin
assignment NONE in the TBT-alt mode.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-18-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Pass the intel_tc_port pointer instead of intel_digital_port to all lane
mask and count query helpers internal to intel_tc.c, to avoid the
redundant intel_digital_port -> intel_tc_port conversions.
While at it shorten the function names, keeping the intel_tc_port_
prefix only for exported functions and use the mtl_, icl_ prefixes
making it clear which platforms a given query function is specific for.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-17-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
For consistency, handle pin assignment NONE on all platforms similarly
to LNL+. On earlier platforms the driver doesn't actually see this pin
assignment - as it's not valid on a connected DP-alt PHY - however it's
a valid HW setting even on those platforms, for instance in legacy mode.
Handle this pin assignment on earlier platforms as well, so that the way
to query the pin assignment can be unified by a follow-up change.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-12-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Add an enum for the TypeC pin assignment, which is a better way to pass
its value around than a plain integer. While at it add a description for
each pin assignment, based on the DP and DP Alt mode Standards, opting
for more details to ease any future debugging related to a given pin
assignment and the cables / sink types used.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
[Imre: s/deined/defined in pin assignment enum documentation.]
Link: https://lore.kernel.org/r/20250805073700.642107-10-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
Use the PHY's cached max lane count value on all platforms similarly to
LNL+. On LNL+ using the cached value is mandatory - since the
corresponding HW register field can get cleared by the time the value is
queried - on earlier platforms there isn't a problem with using the HW
register instead. Having a uniform way to query the value still makes
sense and it's also a bit more efficient, so do that.
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250805073700.642107-7-imre.deak@intel.com
Signed-off-by: Imre Deak <imre.deak@intel.com>
The current wait_panel_status() uses intel_de_wait(),
which internally on Xe platforms calls xe_mmio_wait32().
xe_mmio_wait32() increases poll interval exponentially.
This exponential poll interval increase causes unnessory delays
during resume or power-on when the panel becomes ready earlier,
but polling is delayed due to backoff.
Replace intel_de_wait() with read_poll_timeout() +
intel_de_read() to actively poll the register at a fixed 10ms interval
up to a 5 second timeout. This allows poll to exit
early when panel is ready.
Changes in v2:
Replaced two-phase intel_de_wait() with read_poll_timeout()
+ intel_de_read()
Changes in v3:
- Add poll_interval_ms argument 'wait_panel_status' function.
- Modify 'wait_panel_status' callers with proper poll interval
Changes in v4:
- Change 'wait_panel_off' poll interval to 10ms
Changes in v5:
- Dropped poll_interval_ms parameter,use fixed polling
interval of 10ms (Jani Nikula)
Changes in v6:
- Removed goto in error path
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Link: https://lore.kernel.org/r/20250807082402.79018-1-dibin.moolakadan.subrahmanian@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add a common allocator function for struct intel_digital_port, with some
member default initialization to deduplicate them from everywhere
else. This is similar to intel_connector_alloc().
At least for now, place this in intel_encoder.[ch]. We don't have a
dedicated file for dig port stuff, and there wouldn't be much to add
there anyway. A digital port is a sort of subclass of encoder, so the
location isn't far off the mark.
Reviewed-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Link: https://lore.kernel.org/r/4d2da1a40698f85014140f586405b19795437e81.1753787803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On LNL+ for a disconnected sink the pin assignment value gets cleared by
the HW/FW as soon as the sink gets disconnected, even if the PHY
ownership got acquired already by the BIOS/driver (and hence the PHY
itself is still connected and used by the display). During HW readout
this can result in detecting the PHY's max lane count as 0 - matching
the above cleared aka NONE pin assignment HW state. For a connected PHY
the driver in general (outside of intel_tc.c) expects the max lane count
value to be valid for the video mode enabled on the corresponding output
(1, 2 or 4). Ensure this by setting the max lane count to 4 in this
case. Note, that it doesn't matter if this lane count happened to be
more than the max lane count with which the PHY got connected and
enabled, since the only thing the driver can do with such an output -
where the DP-alt sink is disconnected - is to disable the output.
v2: Rebased on change reading out the pin configuration only if the PHY
is connected.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-4-imre.deak@intel.com
The PHY's pin assignment value in the TCSS_DDI_STATUS register - as set
by the HW/FW based on the connected DP-alt sink's TypeC/PD pin
assignment negotiation - gets cleared by the HW/FW on LNL+ as soon as
the sink gets disconnected, even if the PHY ownership got acquired
already by the driver (and hence the PHY itself is still connected and
used by the display). This is similar to how the PHY Ready flag gets
cleared on LNL+ in the same register.
To be able to query the max lane count value on LNL+ - which is based on
the above pin assignment - at all times even after the sink gets
disconnected, the max lane count must be determined and cached during
the PHY's HW readout and connect sequences. Do that here, leaving the
actual use of the cached value to a follow-up change.
v2: Don't read out the pin configuration if the PHY is disconnected.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-3-imre.deak@intel.com
The TypeC PHY HW readout during driver loading and system resume
determines which TypeC mode the PHY is in (legacy/DP-alt/TBT-alt) and
whether the PHY is connected, based on the PHY's Owned and Ready flags.
For the PHY to be in DP-alt or legacy mode and for the PHY to be in the
connected state in these modes, both the Owned (set by the BIOS/driver)
and the Ready (set by the HW) flags should be set.
On ICL-MTL the HW kept the PHY's Ready flag set after the driver
connected the PHY by acquiring the PHY ownership (by setting the Owned
flag), until the driver disconnected the PHY by releasing the PHY
ownership (by clearing the Owned flag). On LNL+ this has changed, in
that the HW clears the Ready flag as soon as the sink gets disconnected,
even if the PHY ownership was acquired already and hence the PHY is
being used by the display.
When inheriting the HW state from BIOS for a PHY connected in DP-alt
mode on which the sink got disconnected - i.e. in a case where the sink
was connected while BIOS/GOP was running and so the sink got enabled
connecting the PHY, but the user disconnected the sink by the time the
driver loaded - the PHY Owned but not Ready state must be accounted for
on LNL+ according to the above. Do that by assuming on LNL+ that the PHY
is connected in DP-alt mode whenever the PHY Owned flag is set,
regardless of the PHY Ready flag.
This fixes a problem on LNL+, where the PHY TypeC mode / connected state
was detected incorrectly for a DP-alt sink, which got connected and then
disconnected by the user in the above way.
v2: Rename tc_phy_in_legacy_or_dp_alt_mode() to tc_phy_owned_by_display().
(Luca, Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
[Imre: Add one-liner function documentation for tc_phy_owned_by_display()]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-2-imre.deak@intel.com
We want to get rid of triggering "Frame Change" events from
frontbuffer flush calls. We are about to move using TRANS_PUSH
register for this on LunarLake and onwards. Touching TRANS_PUSH
register from fronbuffer flush would be problematic as it's written by
DSB as well.
Fix this by using intel_psr_exit when flush or invalidate is done on
LunarLake and onwards. This is not possible on AlderLake and
MeteorLake due to HW bug in PSR2 disable.
This patch is also fixing problems with cursor plane where cursor is
disappearing or duplicate cursor is seen on the screen.
v2: Commit message updated
Bspec: 68927, 68934, 66624
Reported-by: Janna Martl <janna.martl109@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5522
Fixes: 411ad63877 ("drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards")
Tested-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250801062905.564453-1-jouni.hogander@intel.com
Mask the ERR_FATAL_MASK before scaler initialization.
After enabling the scaler and waiting for one frame,
unmask the previously masked bits, PS_ECC and
ERR_FATAL_MASK
Unmasking of ERR_FATAL_MASK bit is use for
validation purpose. There is no functional
impact.
v2: Remove intel_display_need_wa[Jani]
Optimize the ecc_unmask call[Animesh]
v3: Add intel_display_wa[Jani]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250801125835.2337614-1-nemesa.garg@intel.com
It has been observed that during `xe_display_pm_suspend()` execution,
an HPD interrupt can still be triggered, resulting in `dig_port_work`
being scheduled. The issue arises when this work executes after
`xe_display_pm_suspend_late()`, by which time the display is fully
suspended.
This can lead to errors such as "DC state mismatch", as the dig_port
work accesses display resources that are no longer available or
powered.
To address this, introduce 'intel_encoder_block_all_hpds' and
'intel_encoder_unblock_all_hpds' functions, which iterate over all
encoders and block/unblock HPD respectively.
These are used to:
- Block HPD IRQs before calling 'intel_hpd_cancel_work' in suspend
and shutdown
- Unblock HPD IRQs after 'intel_hpd_init' in resume
This will prevent 'dig_port_work' being scheduled during display
suspend.
Continuation of previous patch discussion:
https://patchwork.freedesktop.org/patch/663964/
Changes in v2:
- Add 'intel_encoder_block_all_hpds' to 'xe_display_pm_shutdown'.(Imre
Deak)
- Add 'intel_hpd_cancel_work' to 'xe_display_fini_early' to cancel
any HPD pending work at late driver removal. (Imre Deak)
Changes in v3:
- Move 'intel_encoder_block_all_hpds' after intel_dp_mst_suspend
in 'xe_display_pm_shutdown'.(Imre Deak)
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250724083928.2298199-1-dibin.moolakadan.subrahmanian@intel.com
