This version brings along following updates:
- Add DSC padding for OVT support
- Setup pixel encoding for YCBCR422
- Fix dml ms order
- Rename header file link.h to link_service.h
- Fix DMUB loading sequence
- Modify link training policy
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
-Certain OVT timings require DSC configurations which divide the
horizontal active unevenly across DSC slices
-DSC slices must be even, so padding needs to be added to the active
to make this possible
-The pixel clock of the HW now needs to be increased to accommodate
the extra padded pixels
-To keep the line time the same, the blank of the HW timing needs to
be increased as well
[How]
-Calculate h_active padding, h_total padding, and pixel clock based
off of the original OVT timing and DSC calculations
-Store these values in the pipe and program HW with these modifications
-Added general support for cases where DSC slice config does not evenly
split the horizontal active by fixing some slice width calculations
-Updated PPS calculations for these cases
Reviewed-by: Chris Park <chris.park@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Relja Vojvodic <rvojvodi@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DP validation may fail with multiple displays and higher color depths.
The sink may support others though.
[How]
When DP bandwidth validation fails, progressively fallback through:
- YUV422 8bpc (bandwidth efficient)
- YUV422 6bpc (reduced color depth)
- YUV420 (last resort)
This resolves cases where displays would show no image due to insufficient
DP link bandwidth for the requested RGB mode.
Suggested-by: Mauri Carvalho <mcarvalho3@lenovo.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
fill_stream_properties_from_drm_display_mode() will not configure pixel
encoding to YCBCR422 when the DRM color format supports YCBCR422 but not
YCBCR420 or YCBCR4444. Instead it will fallback to RGB.
[How]
Add support for YCBCR422 in pixel encoding mapping.
Suggested-by: Mauri Carvalho <mcarvalho3@lenovo.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
small error in order of operations in immediateflipbytes
calculation on dml ms side that can result in dml ms
and mp mismatch immediateflip support for a given pipe
and thus an invalid hw state, correct the order to align
with mp.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Header file name "link.h" collides with system header when dc is
compiled as a user-mode library
[WHAT]
Rename link.h to link_service.h to avoid name collision
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
New sequence from HW for reset and firmware reloading has been
provided that aims to stabilize the reload sequence in the case the
firmware is hung or has outstanding requests.
[How]
Update the sequence to remove the DMUIF reset and the redundant
writes in the release.
Reviewed-by: Sreeja Golui <sreeja.golui@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Currently fallback to low link rate if the link training
fails once on USB4. It may cause the bandwidth couldn't
satisfy the requirement of streams. Modify the policy
to do training retry in the previous few times, only
do fallback at the last time.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the cleaner shader for additional GFX11.0.1/11.0.4 series GPUs to
ensure data isolation among GPU tasks. The cleaner shader is tasked with
clearing the Local Data Store (LDS), Vector General Purpose Registers
(VGPRs), and Scalar General Purpose Registers (SGPRs), which helps avoid
data leakage and guarantees the accuracy of computational results.
This update extends cleaner shader support to GFX11.0.1/11.0.4 GPUs,
previously available for GFX11.0.3. It enhances security by clearing GPU
memory between processes and maintains a consistent GPU state across KGD
and KFD workloads.
Cc: Wasee Alam <wasee.alam@amd.com>
Cc: Mario Sopena-Novales <mario.novales@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When kernel documentation is generated the enum values themselves don't
end up in the documentation. This makes browsing them in HTML a lot
less useful.
[How]
Copy DC_DEBUG_MASK and DC_FEATURE_MASK enum values into matching kdoc
comments.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Define a utility macro for defining capabilities and their attributes.
Capability attributes are read-only, write-only, read-write.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename extra_dw to extra_bytes and document what it's for.
The value is already used as if it were bytes in vcn_v4_0.c
and in amdgpu_ring_init. Just adjust the dword count in
jpeg_v1_0.c so that it becomes a byte count.
v2:
Rename extra_dw to extra_bytes as discussed during review.
Fixes: c8c1a1d2ef ("drm/amdgpu: define and add extra dword for jpeg ring")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This code isn't needed anymore as we collect the same information
into pm_display_cfg instead.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit is necessary for DC to function well with chips
that use the legacy power management code, ie. SI and KV.
Communicate display information from DC to the legacy PM code.
Currently DC uses pm_display_cfg to communicate power management
requirements from the display code to the DPM code.
However, the legacy (non-DC) code path used different fields
and therefore could not take into account anything from DC.
Change the legacy display code to fill the same pm_display_cfg
struct as DC and use the same in the legacy DPM code.
To ease review and reduce churn, this commit does not yet
delete the now unneeded code, that is done in the next commit.
v2:
Rebase.
Fix single_display in amdgpu_dpm_pick_power_state.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds the pixel_clock field to the display config
struct so that power management (DPM) can use it.
We currently don't have a proper bandwidth calculation on old
GPUs with DCE 6-10 because dce_calcs only supports DCE 11+.
So the power management (DPM) on these GPUs may need to make
ad-hoc decisions for display based on the pixel clock.
Also rename sym_clock to pixel_clock in dm_pp_single_disp_config
to avoid confusion with other code where the sym_clock refers to
the DisplayPort symbol clock.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xgmi hive reference is taken on function entry, but not released
correctly for all paths. Use __free() to release reference properly.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add mmio_remap bookkeeping to amdgpu_device and introduce
amdgpu_ttm_mmio_remap_bo_init()/fini() to manage a kernel-owned,
one-page (4K) BO in AMDGPU_GEM_DOMAIN_MMIO_REMAP.
Bookkeeping:
- adev->rmmio_remap.bo : kernel-owned singleton BO
The BO is allocated during TTM init when a remap bus address is available
(adev->rmmio_remap.bus_addr) and PAGE_SIZE <= AMDGPU_GPU_PAGE_SIZE (4K),
and freed during TTM fini.
v2:
- Check mmio_remap bus address (adev->rmmio_remap.bus_addr) instead of
rmmio_base. (Alex)
- Skip quietly if PAGE_SIZE > AMDGPU_GPU_PAGE_SIZE or no bus address
(no warn). (Alex)
- Use `amdgpu_bo_create()` (not *_kernel) - Only with this The object
is stored in adev->mmio_remap.bo and will later be exposed to
userspace via a GEM handle. (Christian)
v3:
- Remove obvious comment before amdgpu_ttm_mmio_remap_bo_fini() call.
(Alex)
v4:
- Squash bookkeeping into this patch (Christian)
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a one-page TTM range manager for AMDGPU_PL_MMIO_REMAP via
amdgpu_ttm_init_on_chip(). This only registers the placement with TTM;
no BO is allocated in this patch.
The singleton 4K remap BO is created and freed in the following patch.
This split follows to separate heap bring-up from BO allocation.
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement TTM-level behavior for AMDGPU_PL_MMIO_REMAP so it behaves as a
CPU-visible IO page:
* amdgpu_evict_flags(): mark as unmovable
* amdgpu_res_cpu_visible(): consider CPU-visible
* amdgpu_bo_move(): use null move when src/dst is MMIO_REMAP
* amdgpu_ttm_io_mem_reserve(): program base/is_iomem/caching using
the device's mmio_remap_* metadata
* amdgpu_ttm_io_mem_pfn(): return PFN for the remapped HDP page
* amdgpu_ttm_tt_pde_flags(): set AMDGPU_PTE_SYSTEM for this mem type
v2:
- Drop HDP-specific comment; keep generic remap (Alex).
v3:
- Fix indentation in amdgpu_res_cpu_visible (Christian).
- Use adev->rmmio_remap.bus_addr for MMIO_REMAP bus/PFN calculations
(Alex).
v4:
- Drop unnecessary (resource_size_t) casts in MMIO_REMAP io-mem paths
(Alex)
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace kzalloc() followed by copy_from_user() with memdup_user() to
improve and simplify ta_if_load_debugfs_write() and
ta_if_invoke_debugfs_write().
No functional changes intended.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace kzalloc() followed by copy_from_user() with memdup_user() to
improve and simplify kfd_ioctl_set_cu_mask().
Return early if an error occurs and remove the obsolete 'out' label.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace k(v)malloc_array() + copy_from_user() with (v)memdup_array_user().
This shrinks the source code and improves separation between the kernel
and userspace slabs.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace kmalloc_array() + copy_from_user() with memdup_array_user().
This shrinks the source code and improves separation between the kernel
and userspace slabs.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace kvmalloc_array() + copy_from_user() with vmemdup_array_user() on
the fast path.
This shrinks the source code and improves separation between the kernel
and userspace slabs.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
None of the pointer operations handled by the ring file requires
volatile, for this reason, this commit removes all occurrences of
volatile associated with rings.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The CSB buffer manipulation occurs in memory where the BO is mapped
during initialization, and some references to this buffer are handled
with volatile, which is incorrect in this scenario. There are a few
cases where the use of volatile is accepted, but none of them align with
CSB operations. Therefore, this commit removes all the volatile
variables associated with the CSB code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function amdgpu_vcn_sw_fini() returns an integer, but this number is
always 0. This commit changes the amdgpu_vcn_sw_fini() return to void,
and eliminates all checks to this return across different VCNs.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When examining the VCN function init, it is common to find a loop that
initializes VCN rings, which uses one IRQ per instance. However, VCN
4.0.3 deviates from this pattern, as it includes a distinct field to
differentiate instances, which results in a slightly different ring
init. This commit makes this difference explicit by using a fixed index
when initializing the ring buffer and also adds a comment.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before destroying the userq buffer object, it requires validating
the userq HW unmap status and ensuring the userq is unmapped from
hardware. If the user HW unmap failed, then it needs to reset the
queue for reusing.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wire up the conversions and strings for the new MMIO_REMAP placement:
* amdgpu_mem_type_to_domain() maps AMDGPU_PL_MMIO_REMAP -> domain
* amdgpu_bo_placement_from_domain() accepts the new domain
* amdgpu_bo_mem_stats_placement() and amdgpu_bo_print_info() report it
* res cursor supports the new placement
* fdinfo prints "mmioremap" for the new placement
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce a kernel-internal TTM placement type AMDGPU_PL_MMIO_REMAP
for the HDP flush MMIO remap page
Plumbing added:
- amdgpu_res_cursor.{first,next}: treat MMIO_REMAP like DOORBELL
- amdgpu_ttm_io_mem_reserve(): return BAR bus address + offset
for MMIO_REMAP, mark as uncached I/O
- amdgpu_ttm_io_mem_pfn(): PFN from register BAR
- amdgpu_res_cpu_visible(): visible to CPU
- amdgpu_evict_flags()/amdgpu_bo_move(): non-migratable
- amdgpu_ttm_tt_pde_flags(): map as SYSTEM
- amdgpu_bo_mem_stats_placement(): report AMDGPU_PL_MMIO_REMAP
- amdgpu_fdinfo: print “mmioremap” bucket label
Cc: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
