gpio: legacy interface cleanups for 7.3
These are the remaining patches for legacy gpio interface
cleanup, ensuring that files referencing them are sure to
have CONFIG_GPIOLIB_LEGACY set, and use linux/gpio/legacy.h
instead of the old linux/gpio.h header.
There are a few more patches already merged in other
branches for 7.3, including soc, led, net and media. Once
everything is in, we can apply the final patches to turn
off CONFIG_GPIOLIB_LEGACY by default and remove the obsolete
header file.
This branch is based on the immutable ib-mfd-legacy-gpio-7.3
branch from mfd.git to avoid a conflict in the rohm drivers.
linux/gpio.h should no longer be used, so remove those and
make sure linux/gpio/consumer.h is included instead.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
linux/gpio.h should no longer be used, convert these instead to
either linux/gpio/consumer.h or linux/gpio/legacy.h as needed.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
linux/gpio.h should no longer be used, convert these instead to
linux/gpio/legacy.h for the sh boards using the legacy interfaces,
or remove it where it is not needed at all.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
linux/gpio.h should no longer be used, convert these instead to
either linux/gpio/consumer.h or linux/gpio/legacy.h as needed.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The OLPC GPIO controller sets up a fixed number space that is used
by at least two drivers:
arch/x86/platform/olpc/olpc-xo1-sci.c: In function 'setup_ec_sci':
arch/x86/platform/olpc/olpc-xo1-sci.c:358:13: error: implicit declaration of function 'gpio_request' [-Wimplicit-function-declaration]
358 | r = gpio_request(OLPC_GPIO_ECSCI, "OLPC-ECSCI");
| ^~~~~~~~~~~~
sound/pci/cs5535audio/cs5535audio_olpc.c: In function 'olpc_analog_input':
sound/pci/cs5535audio/cs5535audio_olpc.c:41:9: error: implicit declaration of function 'gpio_set_value'; did you mean 'gpiod_set_value'? [-Wimplicit-function-declaration]
41 | gpio_set_value(OLPC_GPIO_MIC_AC, on);
The AMD Geode platform that this is based on is now marked as
'Orphaned' in Kconfig, and it is likely that there are no XO1
users on modern kernels, but so far there is no consensus on
removing it entirely.
Select CONFIG_GPIOLIB_LEGACY for this platform and make sure the
sound driver portion cannot be compiled without this.
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Many board files on sh reference the legacy gpiolib interfaces that
are becoming optional. To ensure the boards can keep building, select
CONFIG_GPIOLIB_LEGACY on each of the boards that have one of the
hardcoded calls.
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This driver converts information from ACPI in x86 based tablets and
laptops into platform_data for the gpio_keys driver, using the obsolete
gpio number based interfaces.
This should really be converted to some other method, but since the
conversion is nontrivial, have this one select GPIOLIB_LEGACY for the
time being.
This enables turning GPIOLIB_LEGACY off by default on most kernel
builds. Since the driver is only used on x86 portables, add a CONFIG_X86
dependency, which means non-x86 allmodconfig builds usuallly build
without the legacy gpio support.
Link: https://lore.kernel.org/all/ah-1z9LhVG0wtfBw@google.com/
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The software node fw_devlink support already has its own kunit suite, but
that verifies the fwnode links in isolation. Add GPIO tests that prove
the ordering works in a real-life use-case: a GPIO consumer that
references its provider via a software node.
The first suite registers the provider's software node, adds the consumer
device first and checks that fw_devlink defers its probe until the
provider has been added and bound. The second covers the fallback:
with the provider's software node not yet registered no supplier link is
created, so the consumer probes, devm_gpiod_get() returns -EPROBE_DEFER
and the consumer only binds once the provider shows up.
While at it: the existing gpio_unbind_with_consumers() test keeps the
consumer bound while the provider goes away and then operates the orphaned
descriptor. With software nodes now being covered by fw_devlink that would
instead force-unbind the consumer along with the provider, so opt it out
by setting FWNODE_FLAG_LINKS_ADDED.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: David Gow <david@davidgow.net>
Link: https://patch.msgid.link/20260720-swnode-fw-devlink-v5-1-ec250ae6af91@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
software node: provide support for fw_devlink
This series extends software node support to use fw_devlink and adds test
coverage for the new behaviour.
This is a stable tag for other trees to merge.
Replace the open-coded devm_request_mem_region() plus devm_ioremap()
sequence with a single devm_ioremap_resource() call on the BAR0 resource.
This reserves the region and maps it in one step, and maps the full BAR
length instead of a hardcoded 0x1000 (BAR0 on the bt848/878 is a 4KB
register block, so the mapped size is unchanged).
devm_ioremap_resource() returns an ERR_PTR() on failure, so check with
IS_ERR() and propagate PTR_ERR(). Drop the now-redundant error message,
as devm_ioremap_resource() already logs on every failure path. Since it
can return -EPROBE_DEFER, place it early.
Built for ARM (defconfig + CONFIG_GPIO_BT8XX) with LLVM=1;
drivers/gpio/gpio-bt8xx.o compiles cleanly.
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260713232810.1144712-1-rosenp@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Refactor the rohm-bd7182x7 MFD driver to use software nodes for
instantiating the gpio-keys child device, replacing the old
platform_data mechanism.
The power key's properties are now defined using software nodes and
property entries. The IRQ is passed as a resource attached to the
platform device.
This will allow dropping support for using platform data for configuring
gpio-keys in the future.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260611-rohm-software-nodes-v5-2-0244664a3b65@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Refactor the rohm-bd71828 MFD driver to use software nodes for
instantiating the gpio-keys child device, replacing the old
platform_data mechanism.
The power key's properties are now defined using software nodes and
property entries. The IRQ is passed as a resource attached to the
platform device.
This will allow dropping support for using platform data for configuring
gpio-keys in the future.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260611-rohm-software-nodes-v5-1-0244664a3b65@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add a kunit test suite for fw_devlink support for software nodes.
Most cases call add_links() directly and inspect the resulting fwnode
supplier/consumer lists: a single reference, multiple references, a
reference to an unregistered node, a "remote-endpoint" reference and a
reference array. The last case is end-to-end - it registers real consumer
and supplier platform devices together with their drivers, adds the
consumer first and checks that fw_devlink defers its probe until the
supplier has been bound.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: David Gow <david@davidgow.net>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260713-swnode-fw-devlink-v4-3-d4f2dee27ad9@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Software nodes can be used to describe supplier-consumer relationships
between devices they represent using reference property entries. Unlike
for OF-nodes, driver core cannot yet use these references to create a
probe order that avoids needless probe deferrals on missing providers.
Implement software_node_add_links() modelled on of_fwnode_add_links().
For every DEV_PROP_REF property we resolve each referenced supplier and
create an fwnode link from the node to it. The driver core later promotes
these to device links and defers the consumer until the suppliers are
ready.
There's no allowlist like the one DT needs - devicetree phandles appear
in plenty of non-supplier contexts, but a software node only carries a
reference property when its author explicitly points at another node, so
we treat every reference as an intentional supplier dependency and link
all of them. Graph "remote-endpoint" references are skipped for now: they
go 2-ways between endpoint nodes and would create graph cycles without
the port-parent lifting DT does via get_con_dev(). References to
suppliers that aren't registered yet and self-references are ignored.
fw_devlink resolves the supplier device through fwnode->dev but the core
only records the owning device on the primary fwnode. When the software
node is a device's secondary fwnode, mirror the device pointer onto it in
software_node_notify() so the consumer can actually find the supplier
instead of deferring forever.
While at it: purge the fwnode links in software_node_release() now that
software nodes can own them.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260713-swnode-fw-devlink-v4-2-d4f2dee27ad9@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260704122123.73004-1-pengpeng@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
GPIO software node lookup should rely exclusively on matching the
addresses of the referenced firmware nodes. Commit e5d527be7e ("gpio:
swnode: don't use the swnode's name as the key for GPIO lookup") tried to
enforce this but had to be reverted: it broke existing users who abused
the software node mechanism by creating "dummy" software nodes named
after the device they want to get GPIOs from, without ever attaching them
to the actual GPIO devices. Those users relied on GPIOLIB matching the
label of the GPIO controller against the name of the software node rather
than on a real firmware node link.
All such users have now been coverted to using attached software nodes
via the fwnode address lookup path and the kernel documentation has been
updated to recommend it as the correct approach. This allows us to remove
the old behavior.
This will allow us to leverage the upcoming support for fw_devlink for
software nodes in GPIO core.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20260702-gpio-swnode-drop-label-matching-v2-1-0838349eb644@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704122230.75964-1-pengpeng@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Pull x86 fix from Ingo Molnar:
- Prevent OOB access in the resctrl code while offlining
CPUs when Intel SNC (Sub-NUMA Clustering) is enabled
(Reinette Chatre)
* tag 'x86-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled
Pull perf events fixes from Ingo Molnar:
- Fix a perf_event_attr::remove_on_exec bug for group events
(Taeyang Lee)
- Fix uprobes CALL emulation interaction with shadow stacks, and
add a testcase for this (David Windsor)
- Fix uprobes unregister bug (Jiri Olsa)
* tag 'perf-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline
selftests/x86: Add shadow stack uprobe CALL test
x86/uprobes: Keep shadow stack in sync for emulated CALLs
perf/core: Detach event groups during remove_on_exec
Pull futex fix from Ingo Molnar:
- Fix a futex-requeue deadlock detection regression (Thomas Gleixner)
* tag 'locking-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex/requeue: Revert "Prevent NULL pointer dereference in remove_waiter() on self-deadlock""
Pull irq fixes from Ingo Molnar:
"Misc irqchip driver fixes:
- Fix a resource leak in the RISC-V imsic-early driver (Haoxiang Li)
- Fix an OF node reference leak in the ARM gic-v3-its driver (Yuho
Choi)
- Fix a dangling handler function on module removal bug in the
TS-4800 ARM board irqchip driver (Qingshuang Fu)"
* tag 'irq-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ts4800: Fix missing chained handler cleanup on remove
irqchip/gic-v3-its: Fix OF node reference leak
irqchip/irq-riscv-imsic-early: Fix fwnode leak on state setup failure
Pull sound fixes from Takashi Iwai:
"A standard set of driver-specific fixes and quirks accumulated since
the merge window:
ASoC:
- SOF: Sanity check to prevent OOB reads
- rsnd: Fix clock leak and double-disable issues with PM
- tas675x: Misc fixes for register fields, etc
- lpass-va-macro: Correct codec version for Qualcomm SC7280
- amd-yc: DMIC quirk for Alienware m15 R7 AMD
Others:
- us144mkii: Fix a UAF on disconnect and anchor list corruption
- HD-audio: Realtek quirks for HP models"
* tag 'sound-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: rsnd: src: Add missing scu_supply clock to suspend/resume
Documentation: sound: tas675x: Fix temperature range and impedance documentation
ASoC: codecs: tas675x: Fix CHx temperature range register bit fields
ASoC: codecs: tas675x: use READ_ONCE for params to be used concurrently
ASoC: rsnd: adg: make rsnd_adg_clk_control() idempotent
ASoC: SOF: validate probe info element counts
ALSA: usx2y: us144mkii: fix work UAF on disconnect
ASoC: amd: yc: Add Alienware m15 R7 AMD to DMIC quirk table
ALSA: hda/realtek: Add quirk for HP Victus 16-e0xxx (88EE) to enable mute LED
MAINTAINERS: ASoC: SOF: add AMD reviewer for Sound Open Firmware
ASoC: codecs: lpass-va-macro: Fix LPASS Codec Version for SC7280
ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission
Pull spi fixes from Mark Brown:
"A small set of fixes that came in since -rc1, we have one core fix for
shutting down target mode properly if the system suspends while it's
running plus a small set of fairly unremarkable device specific fixes.
There's also a couple of pure DT binding changes for Renesas SoCs, the
power domains one allows some SoCs to be correctly described with
existing code"
* tag 'spi-fix-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: rzv2h-rspi: Fix DMA transfer error handling for signal interruption
spi: dt-bindings: snps,dw-apb-ssi: add 'power-domains' property
spi: dt-bindings: snps,dw-apb-ssi: drop superfluous RZ/N1 entry
spi: dw: use the correct error msg if request_irq() fails
spi: dw: fix first spi transfer with dma always fallback to PIO
spi: core: Abort active target transfer on controller suspend
spi: sh-msiof: abort transfers when reset times out
Pull s390 fixes from Vasily Gorbik:
- Fix PKEY_VERIFYPROTK ioctl key type handling by removing the generic
key-length based type check with its wrong bit-size calculation, and
leaving protected key verification to the pkey handler
- Fix monwriter buffer reuse by rejecting records that change the data
length, preventing out of bounds user copy into the kernel buffer
* tag 's390-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/monwriter: Reject buffer reuse with different data length
pkey: Move keytype check from pkey api to handler
Pull MIPS fixes from Thomas Bogendoerfer.
* tag 'mips-fixes_7.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: configs: Enable the current Ingenic USB PHY symbol
MIPS: loongson64: add IRQ work based on self-IPI
MIPS: mm: Add check for highmem before removing memory block
mips: Add build salt to the vDSO
MIPS: DEC: Ensure RTC platform device deregistration upon failure
Pull smb server fixes from Steve French:
- Fix several use-after-free races in durable handle reconnect,
supersede, and oplock handling
- Avoid holding the inode oplock lock while waiting for a lease break
acknowledgement. This removes delays of up to 35 seconds when cifs.ko
closes a deferred handle in response to a lease break
- Fix malformed security descriptor handling, including an undersized
DACL allocation issue and an out-of-bounds ACE SID read
- Fix memory leaks in security descriptor and DOS attribute xattr
encoding/decoding error paths
- Fix outstanding SMB2 credit leaks on aborted requests and correct the
QUERY_INFO credit charge calculation
- Fix hard-link creation without replacement being incorrectly rejected
when the handle lacks DELETE access
- Avoid unnecessary zeroing of large SMB2 read buffers
- Add an oplock list lockdep annotation and update the documented
support status for durable handles and SMB3.1.1 compression
- Durable handle fixes to address ownership and lifetime races during
reconnect, session teardown, oplock handling, and superseding opens,
preventing stale session and file references from being used by
concurrent operations
* tag 'v7.2-rc1-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix app-instance durable supersede session UAF
ksmbd: snapshot previous oplock state before durable checks
ksmbd: close superseded durable handles through refcount handoff
ksmbd: fix use-after-free of fp->owner.name in durable handle owner check
smb/server: do not require delete access for non-replacing links
ksmbd: don't hold ci->m_lock while waiting for a lease break ack
ksmbd: doc: update feature support status for durable handles and compression
ksmbd: annotate oplock list traversals under m_lock
ksmbd: fix outstanding credit leak on abort and error paths
ksmbd: fix credit charge calculation for SMB2 QUERY_INFO
ksmbd: avoid zeroing the read buffer in smb2_read()
ksmbd: validate num_subauth when copying ACE in set_ntacl_dacl
ksmbd: reject undersized DACLs before parsing ACEs
ksmbd: fix n.data memory leak in ksmbd_vfs_set_dos_attrib_xattr
ksmbd: Fix acl.sd_buf memory leak and invalid sd_size error handling
ksmbd: fix sd_ndr.data memory leak in ksmbd_vfs_set_sd_xattr
Pull drm fixes from Dave Airlie:
"Weekly fixes for drm. This is large for rc2 but it's just a lot of
small fixes across a bunch of drivers, xe, amdgpu as usual, plus some
sashiko-inspired fixes for panthor, and some dma-fence updates.
core:
- kernel doc fix
- include types.h in drm_ras.h
dma-fence:
- fix NULL ptr dereference
- use correct callback
- make dma_fence_dedup_array more robust
dp:
- handle torn down topology gracefully
- fix kernel doc
i915:
- Input validation fixes for BIOS and EDID
- Fix HDCP code buffer overflow and seq_num_v monotonic increase check
- Fix near-NULL deref in i915_active during GFP_ATOMIC exhaustion
xe:
- Wedge from the timeout handler only after releasing the queue
- Fix a NULL pointer dereference
- Remove redundant exec_queue_suspended
- RTP / OA whitelist fixes
- Return error on non-migratable faults requiring devmem
- Skip FORCE_WC and vm_bound check for external dma-bufs
- Hold notifier lock for write on inject test path
- Drop bogus static from finish in force_invalidate
- Fix double-free of managed BO in error path
- Don't attempt to process FAST_REQ or EVENT relays
- Fix NPD in bo_meminfo
- Prevent invalid cursor access for purged BOs
- Fix offset alignment for MERT WHITELST_OA_MERT_MMIO_TRG
amdgpu:
- Soc24 aborted suspend fix
- Drop unecessary BUG() and BUG_ON() from error paths
- SCPM fix
- Power reporting fix
- DCE HDR fix
- UVD boundary checks
- VCN boundary checks
- VCE boundary checks
- DCN 4.2 fixes
- Large stack allocation fixes
- Fix aperture mapping leak
- UserQ fixes
- Ignore_damage_clips fix
- ACP fixes
- DC boundary checks
- GPUVM fixes
- JPEG idle check fixes
- Userptr fix
- GC 11.7 updates
- Non-4K page fix
- SMU 13 fixes
- DP alt mode fix
amdkfd:
- Boundary checks
- CRIU fixes
amdxdna:
- fix device removal issues
- fix use after free in debug BO
imagination:
- fix double call to scheduler fini
- fix ioctl return values
- fix user array stride
virtio:
- handle EDIDs better
panthor:
- irq safe fence lock fix
- reset work fix
- fix invalid pointer
- fix iomem access in suspended state
- sched resume fix
- unplug suspend fix
- drop needless check
- eviction leak fix
- bail on group start/resume fix
- keep irqs masked
malidp:
- use clock bulk API
komeda:
- clock prepare fixes"
* tag 'drm-fixes-2026-07-04' of https://gitlab.freedesktop.org/drm/kernel: (105 commits)
drm/xe/oa: Fix offset alignment for MERT WHITELIST_OA_MERT_MMIO_TRG
drm/xe/pt: prevent invalid cursor access for purged BOs
drm/xe: fix NPD in bo_meminfo()
drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays
drm/xe/hw_engine: Fix double-free of managed BO in error path
drm/xe/userptr: Drop bogus static from finish in force_invalidate
drm/xe/userptr: Hold notifier_lock for write on inject test path
drm/xe/display: skip FORCE_WC and vm_bound check for external dma-bufs
drm/xe: Return error on non-migratable faults requiring devmem
drm/xe/rtp: Ensure locking/ref counting for OA whitelists
drm/xe/oa: (De-)whitelist OA registers on OA stream open/release
drm/xe/rtp: (De-)whitelist OA registers for all hwe's for a gt
drm/xe/rtp: Toggle 'deny' bit to (de-)whitelist OA regs
drm/xe/rtp: Save OA nonpriv registers to register save/restore lists
drm/xe/rtp: Generalize whitelist_apply_to_hwe
drm/xe/rtp: Keep track of non-OA nonpriv slots
drm/xe/rtp: Maintain OA whitelists separately
drm/xe/rtp: Fix build error with clang < 21 and non-const initializers
drm/imagination: Fix user array stride in pvr_set_uobj_array()
drm/imagination: Fix returned size for DRM_IOCTL_PVR_DEV_QUERY
...
Pull ACPI support fixes from Rafael Wysocki:
"These fix a coding mistake in the ACPI TAD (Time and Alarm
Device) driver introduced by one of its previous updates and
get rid of the ugly #ifdef __KERNEL__ conditional compilation
in acpi_ut_safe_strncpy() by redefining that function as an
alias for strscpy_pad():
- Add a missing ACPI_TAD_AC_WAKE capability check omitted by mistake
to the ACPI TAD driver (Xu Rao)
- Define acpi_ut_safe_strncpy() as an alias for strscpy_pad()
which is viable because that function is only called from kernel
code (Rafael Wysocki)"
* tag 'acpi-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Define acpi_ut_safe_strncpy() as strscpy_pad() alias
ACPI: TAD: Check AC wake capability before enabling wakeup
Pull RISC-V fixes from Paul Walmsley:
- Fix a crash when a kretprobe reads from the stack
- Fix an issue with the build-time mcount sorter that broke ftrace
- Fix the rv32 IRQ stack frame padding to match the ABI
- Only defer IOMMU configuration during initialization. This avoids an
issue where IOMMU configuration could be indefinitely deferred
- Add the missing build salt to the vDSO
- Now that RISC-V systems with higher numbers of cores are starting to
become available, raise NR_CPUS for RISC-V to 256
- Clean up some warnings from sparse caused by the RISC-V-optimized
RAID6 code
- Clean up our __cpu_up() code with a few minor fixes
* tag 'riscv-for-linus-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: probes: save original sp in rethook trampoline
riscv: Fix 32-bit call_on_irq_stack() frame pointer ABI
scripts/sorttable: Handle RISC-V patchable ftrace entries
riscv: smp: use secs_to_jiffies in __cpu_up
ACPI: RIMT: Only defer the IOMMU configuration in init stage
riscv: Add build salt to the vDSO
raid6: fix raid6_recov_rvv symbol undeclared warning
raid6: fix riscv symbol undeclared warnigns
riscv: Raise default NR_CPUS for 64BIT to 256
Pull smb client fixes from Steve French:
- Credit fix
- Fix alignment issue in parse_posix_ctxt
- SID parsing fix
* tag 'v7.2-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix missing credit release on failure in cifs_issue_read()
cifs: update internal module version number
smb: client: use unaligned reads in parse_posix_ctxt()
smb: client: harden POSIX SID length parsing
