Implement a new admin command and helper function to handle and obtain
CGU measurements for input pins.
Add new callback operations to control the dpll device-level feature
"phase offset monitor," allowing it to be enabled or disabled. If the
feature is enabled, provide users with measured phase offsets and
notifications.
Initialize PPS DPLL with new callback operations if the feature is
supported by the firmware.
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250612152835.1703397-4-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel says:
====================
dp83tg720: Reduce link recovery
This patch series improves the link recovery behavior of the TI
DP83TG720 PHY driver.
Previously, we introduced randomized reset delay logic to avoid reset
collisions in multi-PHY setups. While this approach was functional, it
had notable drawbacks: unpredictable behavior, longer and more variable
link recovery times, and overall higher complexity in link handling.
With this new approach, we replace the randomized delay with
deterministic, role-specific delays in the PHY reset logic. This enables
us to:
- Remove the redundant empirical 600 ms delay in read_status()
- Drop the random polling interval logic
- Introduce a clean, adaptive polling strategy with consistent
behavior and improved responsiveness
As a result, the PHY is now able to recover link reliably in under
1000_ms
====================
Link: https://patch.msgid.link/20250612104157.2262058-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the PHY reset logic includes a role-specific asymmetric delay
to avoid synchronized reset deadlocks, the previously used randomized
polling intervals are no longer necessary.
This patch removes the get_random_u32_below()-based logic and introduces
an adaptive polling strategy:
- Fast polling for a short time after link-down
- Slow polling if the link remains down
- Slower polling when the link is up
This balances CPU usage and responsiveness while avoiding reset
collisions. Additionally, the driver still relies on polling for
all link state changes, as interrupt support is not implemented,
and link-up events are not reliably signaled by the PHY.
The polling parameters are now documented in the updated top-of-file
comment.
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250612104157.2262058-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a .soft_reset callback for the DP83TG720 PHY that issues a hardware
reset followed by an asymmetric post-reset delay. The delay differs
based on the PHY's master/slave role to avoid synchronized reset
deadlocks, which are known to occur when both link partners use
identical reset intervals.
The delay includes:
- a fixed 1ms wait to satisfy MDC access timing per datasheet, and
- an empirically chosen extra delay (97ms for master, 149ms for slave).
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250612104157.2262058-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shannon Nelson says:
====================
ionic: three little changes
These are three little changes for the code from inspection
and testing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Cancel any entries on the delayed work queue before starting
to tear down the lif to be sure there is no race with any
other events.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the kern_dbpage gets set up in ionic_lif_init() and that
function's error path will clean it if needed, the kern_dbpage
on teardown should be cleaned in ionic_lif_deinit(), not in
ionic_lif_free(). As it is currently we get a double call
to iounmap() on kern_dbpage if the PCI ionic fails setting up
the lif. One example of this is when firmware isn't responding
to AdminQ requests and ionic's first AdminQ call fails to
setup the NotifyQ.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: David S. Miller <davem@davemloft.net>
The firmware heartbeat value is an unsigned number, and seeing
a negative number when it gets big is a little disconcerting.
Example:
ionic 0000:24:00.0: FW heartbeat stalled at -1342169688
Print using the unsigned flag.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the arguments passed to phy_get_internal_delay() - the "dev"
argument is always &phydev->mdio.dev, and as the phydev is passed in,
there's no need to also pass in the struct device, especially when this
function is the only reason for the caller to have a local "dev"
variable.
Remove the redundant "dev" argument, and update the callers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1uPLwB-003VzR-4C@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hash based multicast filtering is an optional feature. Currently,
driver overrides the value of multicast_filter_bins based on the hash
table size. If the feature is not supported, hash table size reads 0
however the value of multicast_filter_bins remains set to default
HASH_TABLE_SIZE which is incorrect. Let's extend the use of the property
snps,multicast-filter-bins to xgmac so it can be set to 0 via devicetree
to indicate multicast filtering is not supported.
Signed-off-by: Nikunj Kela <nikunj.kela@sima.ai>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Link: https://patch.msgid.link/20250610200411.3751943-1-nikunj.kela@sima.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make mdio_device_bus_match() the default match function for non-PHY
MDIO devices. Benefit is that we don't have to export this function
any longer. As long as mdiodev->modalias isn't set, there's no change
in behavior. mdiobus_create_device() is the only place where
mdiodev->modalias gets set, but this function sets
mdio_device_bus_match() as match function anyway.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/6c94e3d3-bfb0-4ddc-a518-6fddbc64e1d0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
net: ethtool: add dedicated RXFH driver callbacks
Andrew asked me to plumb the RXFH header fields configuration
thru to netlink. Before we do that we need to clean up the driver
facing API a little bit. Right now RXFH configuration shares the
callbacks with n-tuple filters. The future of n-tuple filters
is uncertain within netlink. Separate the two for clarity both
of the core code and the driver facing API.
This series adds the new callbacks and converts the initial
handful of drivers. There is 31 more driver patches to come,
then we can stop calling rxnfc in the core for rxfh.
====================
Link: https://patch.msgid.link/20250611145949.2674086-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We mux multiple calls to the drivers via the .get_nfc and .set_nfc
callbacks. This is slightly inconvenient to the drivers as they
have to de-mux them back. It will also be awkward for netlink code
to construct struct ethtool_rxnfc when it wants to get info about
RX Flow Hash, from the RSS module.
Add dedicated driver callbacks. Create struct ethtool_rxfh_fields
which contains only data relevant to RXFH. Maintain the names of
the fields to avoid having to heavily modify the drivers.
For now support both callbacks, once all drivers are converted
ethtool_*et_rxfh_fields() will stop using the rxnfc callbacks.
Link: https://patch.msgid.link/20250611145949.2674086-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RX Flow Hash configuration uses the same argument structure
as flow filters. This is probably why ethtool IOCTL handles
them together. The more checks we add the more convoluted
this code is getting (as some of the checks apply only
to flow filters and others only to the hashing).
Copy the code to separate the handling. This is an exact
copy, the next change will remove unnecessary handling.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250611145949.2674086-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent
invalid routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
transient packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple
requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set"
* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
net: ethtool: Don't check if RSS context exists in case of context 0
af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
ipv6: Move fib6_config_validate() to ip6_route_add().
net: drv: netdevsim: don't napi_complete() from netpoll
net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
veth: prevent NULL pointer dereference in veth_xdp_rcv
net_sched: remove qdisc_tree_flush_backlog()
net_sched: ets: fix a race in ets_qdisc_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: red: fix a race in __red_change()
net_sched: prio: fix a race in prio_tune()
net_sched: sch_sfq: reject invalid perturb period
net: phy: phy_caps: Don't skip better duplex macth on non-exact match
MAINTAINERS: Update Kuniyuki Iwashima's email address.
selftests: net: add test case for NAT46 looping back dst
net: clear the dst when changing skb protocol
net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
net/mlx5e: Fix leak of Geneve TLV option object
net/mlx5: HWS, make sure the uplink is the last destination
...
Pull pin control fixes from Linus Walleij:
- Add some missing pins on the Qualcomm QCM2290, along with a managed
resources patch that make it clean and nice
- Drop an unused function in the ST Micro driver
- Drop bouncing MAINTAINER entry
- Drop of_match_ptr() macro to rid compile warnings in the TB10x
driver
- Fix up calculation of pin numbers from base in the Sunxi driver
* tag 'pinctrl-v6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunxi: dt: Consider pin base when calculating bank number from pin
pinctrl: tb10x: Drop of_match_ptr for ID table
pinctrl: MAINTAINERS: Drop bouncing Jianlong Huang
pinctrl: st: Drop unused st_gpio_bank() function
pinctrl: qcom: pinctrl-qcm2290: Add missing pins
pinctrl: qcom: switch to devm_gpiochip_add_data()
Pull ARC fixes from Vineet Gupta:
- arch_atomic64_cmpxchg relaxed variant [Jason]
- use of inbuilt swap in stack unwinder [Yu-Chun Lin]
- use of __ASSEMBLER__ in kernel headers [Thomas Huth]
* tag 'arc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: Replace __ASSEMBLY__ with __ASSEMBLER__ in the non-uapi headers
ARC: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
ARC: unwind: Use built-in sort swap to reduce code size and improve performance
ARC: atomics: Implement arch_atomic64_cmpxchg using _relaxed
Johannes Berg says:
====================
Another quick round of updates:
- revert mwifiex HT40 that was causing issues
- many ath10k/ath11k/ath12k fixes
- re-add some iwlwifi code I lost in a merge
- use kfree_sensitive() on an error path in cfg80211
* tag 'wireless-2025-06-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: use kfree_sensitive() for connkeys cleanup
wifi: iwlwifi: fix merge damage related to iwl_pci_resume
Revert "wifi: mwifiex: Fix HT40 bandwidth issue."
wifi: ath12k: fix uaf in ath12k_core_init()
wifi: ath12k: Fix hal_reo_cmd_status kernel-doc
wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850
wifi: ath11k: validate ath11k_crypto_mode on top of ath11k_core_qmi_firmware_ready
wifi: ath11k: consistently use ath11k_mac_get_fw_stats()
wifi: ath11k: move locking outside of ath11k_mac_get_fw_stats()
wifi: ath11k: adjust unlock sequence in ath11k_update_stats_event()
wifi: ath11k: move some firmware stats related functions outside of debugfs
wifi: ath11k: don't wait when there is no vdev started
wifi: ath11k: don't use static variables in ath11k_debugfs_fw_stats_process()
wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
wil6210: fix support for sparrow chipsets
wifi: ath10k: Avoid vdev delete timeout when firmware is already down
ath10k: snoc: fix unbalanced IRQ enable in crash recovery
====================
Link: https://patch.msgid.link/20250612082519.11447-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gal Pressman says:
====================
Fix ntuple rules targeting default RSS
This series addresses a regression in ethtool flow steering where rules
targeting the default RSS context (context 0) were incorrectly rejected.
The default RSS context always exists but is not stored in the rss_ctx
xarray like additional contexts. The current validation logic was
checking for the existence of context 0 in this array, causing valid
flow steering rules to be rejected.
This prevented configurations such as:
- High priority rules directing specific traffic to the default context
- Low priority catch-all rules directing remaining traffic to additional
contexts
Patch 1 fixes the validation logic to skip the existence check for
context 0.
Patch 2 adds a selftest that verifies this behavior.
v3: https://lore.kernel.org/20250609120250.1630125-1-gal@nvidia.com
v2: https://lore.kernel.org/20250225071348.509432-1-gal@nvidia.com
====================
Link: https://patch.msgid.link/20250612071958.1696361-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test_rss_default_context_rule() to verify that ntuple rules can
correctly direct traffic to the default RSS context (context 0).
The test creates two ntuple rules with explicit location priorities:
- A high-priority rule (loc 0) directing specific port traffic to
context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
1.
This validates that:
1. Rules targeting the default context function properly.
2. Traffic steering works as expected when mixing default and
additional RSS contexts.
The test was written by AI, and reviewed by humans.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250612071958.1696361-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
