This commit corrects the descriptors for the
vcn_v4_0/v4_0_3/v4_0_5/v5_0_0 _set_clockgating_state and
vcn_v4_0/v4_0_3/v4_0_5/v5_0_0 _set_powergating_state functions in the
amdgpu driver.
The parameter descriptors in the comments were mismatched with the
actual function parameters. The non-existent 'handle' parameter has been
replaced with the correct 'ip_block' parameter in the comments to
accurately reflect the function signatures and to resolving the below
with gcc W=1:
drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c:1232: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v5_0_0_set_clockgating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c:1232: warning: Excess function parameter 'handle' description in 'vcn_v5_0_0_set_clockgating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c:1263: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v5_0_0_set_powergating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c:1263: warning: Excess function parameter 'handle' description in 'vcn_v5_0_0_set_powergating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:2012: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v4_0_set_clockgating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:2012: warning: Excess function parameter 'handle' description in 'vcn_v4_0_set_clockgating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:2043: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v4_0_set_powergating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:2043: warning: Excess function parameter 'handle' description in 'vcn_v4_0_set_powergating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c:1505: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v4_0_5_set_clockgating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c:1505: warning: Excess function parameter 'handle' description in 'vcn_v4_0_5_set_clockgating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c:1536: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v4_0_5_set_powergating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_5.c:1536: warning: Excess function parameter 'handle' description in 'vcn_v4_0_5_set_powergating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_3.c:1629: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v4_0_3_set_powergating_state'
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_3.c:1629: warning: Excess function parameter 'handle' description in 'vcn_v4_0_3_set_powergating_state'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds the missing kdoc parameter descriptor for 'inst' in the
smu_dpm_set_power_gate function.
The 'inst' parameter, which specifies the instance of the IP block to
power gate/ungate.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:359: warning: Function parameter or struct member 'inst' not described in 'smu_dpm_set_power_gate'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move all per instance variables from amdgpu_vcn to amdgpu_vcn_inst.
Move adev->vcn.fw[i] from amdgpu_vcn to amdgpu_vcn_inst.
Move adev->vcn.vcn_config[i] from amdgpu_vcn to amdgpu_vcn_inst.
Move adev->vcn.vcn_codec_disable_mask[i] from amdgpu_vcn to amdgpu_vcn_inst.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass ip_block instead of adev in set_clockgating_state() callback
functions. Modify set_clockgating_state()for all correspoding ip blocks.
v2: remove all changes for is_idle(), remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to amdgpu_dpm_enable_vcn() function, and change
all calls from vcn ip functions to add instance argument. vcn generations
with only one instance (v1.0, v2.0) always use 0 as instance number. vcn
generations with multiple instances (v2.5, v3.0, v4.0, v4.0.3, v4.0.5,
v5.0.0) use the actual instance number.
v2: remove for-loop in amdgpu_dpm_enable_vcn(), and temporarily move it
to vcn ip with multiple instances, in order to keep the exact same logic
as before, until further separation in next patch.
v3: fix missing prefix
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to amdgpu_dpm_set_powergating_by_smu() function,
and use the instance to call set_powergating_by_smu().
v2: remove duplicated functions.
remove for-loop in amdgpu_dpm_set_powergating_by_smu(), and temporarily
move it to amdgpu_dpm_enable_vcn(), in order to keep the exact same logic
as before, until further separation in next patch.
v3: drop SI logic in amdgpu_dpm_enable_vcn().
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to set_powergating_by_smu() function, and
re-write all amd_pm functions accordingly. Then use the instance to
call smu_dpm_set_vcn_enable().
v2: remove duplicated functions.
remove for-loop in smu_dpm_set_power_gate(), and temporarily move it to
to amdgpu_dpm_set_powergating_by_smu(), in order to keep the exact same
logic as before, until further separation in next patch.
v3: add instance number in error message.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
First, add an instance parameter to smu_dpm_set_vcn_enable() function,
and calling dpm_set_vcn_enable() with this given instance.
Second, modify vcn_gated to be an array, to track the gating status
for each vcn instance separately.
With these 2 changes, smu_dpm_set_vcn_enable() will check and set the
gating status for the given vcn instance ONLY.
v2: remove duplicated functions.
remove for-loop in dpm_set_vcn_enable(), and temporarily move it to
to smu_dpm_set_power_gate(), in order to keep the exact same logic as
before, until further separation in next patch.
v3: add instance number in error message.
v4: declaring i at the top of the function.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For smu ip with multiple vcn instances (smu 11/13/14), remove all the
for loop in dpm_set_vcn_enable() functions. And use the instance
argument to power up/down vcn for the given instance only, instead
of powering up/down for all vcn instances.
v2: remove all duplicated functions in v1.
remove for-loop from each ip, and temporarily move to dpm_set_vcn_enable,
in order to keep the exact same logic as before, until further separation
in the next patch.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of error after a amdgpu_gfx_rlc_enter_safe_mode() call, it is not
balanced by a corresponding amdgpu_gfx_rlc_exit_safe_mode() call.
Add the missing call.
Fixes: 9b7b8154cd ("drm/amd/powerplay: added didt support for vega10")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And implement it for UMC v12_0. The die id is calculated from IPID
register in bad page retirement flow, but we don't store it on eeprom
and it can be also gotten from physical address.
v2: get PA_C4 and PA_R13 from MCA address since they may be cleared in
retired page.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1 (legacy way): store channel index within a UMC instance in eeprom
v2: store global channel index in eeprom
V2: only save the flag on eeprom, clear it after saving.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Save the global channel index returned by RAS TA to eeprom.
We can get memory physical address by MCA address and channel index.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Old version of RAS TA doesn't support to convert MCA address stored on
eeprom to physical address (PA), support to find all bad pages in one
memory row by PA with old RAS TA. This approach is only suitable for
nps1 mode.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are some changes in format of memory normalized address per
NPS mode, need to adjust bit mapping according to NPS mode.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before scheduling a recovery due to scheduler/job hang, check if a RAS
error is detected. If so, choose RAS recovery to handle the situation. A
scheduler/job hang could be the side effect of a RAS error. In such
cases, it is required to go through the RAS error recovery process. A
RAS error recovery process in certains cases also could avoid a full
device device reset.
An error state is maintained in RAS context to detect the block
affected. Fatal Error state uses unused block id. Set the block id when
error is detected. If the interrupt handler detected a poison error,
it's not required to look for a fatal error. Skip fatal error checking
in such cases.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
NPS mode is introduced, the value of memory physical address (PA)
related to a MCA address varies per nps mode. We need to rely on
MCA address and convert it into PA accroding to nps mode.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One UMC MCA address could map to multiply physical address (PA):
AMDGPU_RAS_EEPROM_REC_PA: one record store one PA
AMDGPU_RAS_EEPROM_REC_MCA: one record store one MCA address, PA
is not cared about
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can set UMC node instance to invalid state if we use global channel
index, and RAS TA can choose UMC address conversion approach by checking
node_inst value.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So the code can be simplified, and no need to expose the detail of PA
format outside address conversion.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to perform the two MMIO writes in the KIQ
Setting registers programmed period, and reducing the MMIO
writes will save the driver loading time.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement sdma soft reset by sending MSG_ResetSDMA on smu 13.0.6.
v2: Add firmware version for the reset message.
v3: Add ip version check. Print inst_mask on failure.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to create user BOs with MC address for isp using the dma-buf handle
exported for the buffers allocated from system memory in isp driver.
Export amdgpu_bo_create_kernel() and amdgpu_bo_free_kernel() as well for isp to
allocate GTT internal buffers required for fw to run.
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When using MES creating a pdd will require talking to the GPU to
setup the relevant context. The code here forgot to wake up the GPU
in case it was in suspend, this causes KVM to EFAULT for passthrough
GPU for example. This issue can be masked if the GPU was woken up by
other things (e.g. opening the KMS node) first and have not yet gone to sleep.
v4: do the allocation of proc_ctx_bo in a lazy fashion
when the first queue is created in a process (Felix)
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Emitting the cleaner shader must come after the check if a VM switch is
necessary or not.
Otherwise we will emit the cleaner shader every time and not just when it is
necessary because we switched between applications.
This can otherwise crash on gang submit and probably decreases performance
quite a bit.
v2: squash in fix from Srini (Alex)
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: ee7a846ea2 ("drm/amdgpu: Emit cleaner shader at end of IB submission")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
ISP hw_init is not called with the recent changes related
to hw init levels. AMDGPU_INIT_LEVEL_DEFAULT is ignoring
the ISP IP block as AMDGPU_IP_BLK_MASK_ALL is derived using
incorrect max number of IP blocks.
Update AMDGPU_IP_BLK_MASK_ALL to use AMD_IP_BLOCK_TYPE_NUM
instead of AMDGPU_MAX_IP_NUM to fix the issue.
Fixes: 14f2fe34f5 ("drm/amdgpu: Add init levels")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the function pqm_uninit there is a call-assignment of "pdd =
kfd_get_process_device_data" which could be null, and this value was
later dereferenced without checking.
Fixes: fb91065851 ("drm/amdkfd: Refactor queue wptr_bo GART mapping")
Signed-off-by: Andrew Martin <Andrew.Martin@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Set the default workload type to bootup type on smu v13.0.7.
This is because of the constraint on smu v13.0.7.
Gfx activity has an even higher set point on 3D fullscreen
mode than the one on bootup mode. This causes the 3D fullscreen
mode's performance is worse than the bootup mode's performance
for the lightweighted/medium workload. For the high workload,
the performance is the same between 3D fullscreen mode and bootup
mode.
v2: set the default workload in ASIC specific file
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
Refactor such that individual SMU IP versions can choose the startup
power profile mode. If no preference, then use the generic default power
profile selection logic.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
base.sched may not be set for each instance and should not
be used for cases such as non-IB tests.
Fixes: 2320c9e6a7 ("drm/sched: memset() 'job' in drm_sched_job_init()")
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use second jump table in sriov for live migration or mulitple VF
support so different VF can load different version of MEC as long
as they support sjt
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split resume into a 3rd step to handle displays when DCC is
enabled on DCN 4.0.1. Move display after the buffer funcs
have been re-enabled so that the GPU will do the move and
properly set the DCC metadata for DCN.
v2: fix fence irq resume ordering
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
smu->workload_mask is IP specific and should not be messed with in
the common code. The mask bits vary across SMU versions.
Move all handling of smu->workload_mask in to the backends and
simplify the code. Store the user's preference in smu->power_profile_mode
which will be reflected in sysfs. For internal driver profile
switches for KFD or VCN, just update the workload mask so that the
user's preference is retained. Remove all of the extra now unused
workload related elements in the smu structure.
v2: use refcounts for workload profiles
v3: rework based on feedback from Lijo
v4: fix the refcount on failure, drop backend mask
v5: rework custom handling
v6: handle failure cleanup with custom profile
v7: Update documentation
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
Use found block to call correct init/resume function on the block.
Set status.hw for resume and init.
Print re-init result again. Change to use dev_info.
Use amdgpu_device_ip_get_ip_block to get target block instead of
loop.
Fixes: 502d76308d ("drm/amdgpu: validate resume before function call")
Signed-off-by: Yiqing Yao <YiQing.Yao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
