rtnl_lock_killable() is used only in register_netdev()
and will be converted to per-netns RTNL.
Let's unexport it and add the corresponding helper.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In cases where the work done is less than the budget, `fbnic_poll` is
returning 0. This affects the tracing of `napi_poll`. Following is a
snippet of before and after result from `napi_poll` tracepoint. Instead,
returning the work done improves the manual tracing.
Before:
@[10]: 1
...
@[64]: 208175
@[0]: 2128008
After:
@[56]: 86
@[48]: 222
...
@[5]: 1885756
@[6]: 1933841
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250104015316.3192946-1-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce support for HTB Qdisc offload available in the Airoha EN7581
ethernet controller. EN7581 can offload only one level of HTB leafs.
Each HTB leaf represents a QoS channel supported by EN7581 SoC.
The typical use-case is creating a HTB leaf for QoS channel to rate
limit the egress traffic and attach an ETS Qdisc to each HTB leaf in
order to enforce traffic prioritization.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce support for ETS Qdisc offload available on the Airoha EN7581
ethernet controller. In order to be effective, ETS Qdisc must configured
as leaf of a HTB Qdisc (HTB Qdisc offload will be added in the following
patch). ETS Qdisc available on EN7581 ethernet controller supports at
most 8 concurrent bands (QoS queues). We can enable an ETS Qdisc for
each available QoS channel.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Airoha EN7581 SoC supports 32 Tx DMA rings used to feed packets to QoS
channels. Each channels supports 8 QoS queues where the user can apply
QoS scheduling policies. In a similar way, the user can configure hw
rate shaping for each QoS channel.
Introduce ndo_select_queue callback in order to select the tx queue
based on QoS channel and QoS queue. In particular, for dsa device select
QoS channel according to the dsa user port index, rely on port id
otherwise. Select QoS queue based on the skb priority.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is a preliminary patch in order to enable hw Qdisc offloading.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If a frame is going to be discarded by driver, this frame is never touched
by driver and the cache lines never become dirty obviously,
page_pool_recycle_direct() wastes CPU cycles on unnecessary calling of
page_pool_dma_sync_for_device() to sync entire frame.
page_pool_put_page() with sync_size setting to 0 is the proper method.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20250103093733.3872939-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Every case in the switch-block ends with return statement, and the
default: branch handles the cases where rsrc_type is invalid and
returns "Unknown", this makes the return statement at the end of the
function unreachable and redundant.
The semi-colon is not required after the switch-block's curly braces.
Remove the semi-colon after the switch-block's curly braces and the
return statement at the end of the function.
This issue was reported by Coverity Scan.
Signed-off-by: Nihar Chaithanya <niharchaithanya@gmail.com>
Link: https://patch.msgid.link/20250104171905.13293-1-niharchaithanya@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5 Hardware Steering part 2
This series contain HWS code cleanups, enhancements, bug fixes, and
additions. Note that some of these patches are fixing bugs in existing
code, but we submit them without 'Fixes' tag to avoid the unnecessary
burden for stable releases, as HWS still couldn't be enabled.
Patches 1-5:
HWS, various code cleanups and enhancements
Patches 6-14:
HWS, various bug fixes and additions
Patch 15:
HWS, setting timeout on polling
====================
Link: https://patch.msgid.link/20250102181415.1477316-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rule counter in matcher's struct is used in two places:
1. As heuristics to decide when the number of rules have crossed a
certain percentage threshold and the matcher should be resized.
We don't mind here if the number will be off by 1-2 due to concurrency.
2. When destroying matcher, the counter value is checked and the
user is warned if it is not 0. Here we lock all the queues, so the
counter will be correct.
We don't need to always have *exact* number, but we do need this
number to not be corrupted, which is what is happening when the
counter isn't atomic, due to update by different threads.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of having a large array of action templates allocated with
kmalloc, have smaller array and allocate it with kvmalloc.
The size of the array represents the max number of AT attach
operations for the same matcher. This number is not expected
to be very high. In any case, when the limit is reached, the
next attempt to attach new AT will result in creation of a new
matcher and moving all the rules to this matcher.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when firmware failure occurs during matcher disconnect flow,
the error flow of the function reconnects the matcher back and returns
an error, which continues running the calling function and eventually
frees the matcher that is being disconnected.
This leads to a case where we have a freed matcher on the matchers list,
which in turn leads to use-after-free and eventual crash.
This patch fixes that by not trying to reconnect the matcher back when
some FW command fails during disconnect.
Note that we're dealing here with FW error. We can't overcome this
problem. This might lead to bad steering state (e.g. wrong connection
between matchers), and will also lead to resource leakage, as it is
the case with any other error handling during resource destruction.
However, the goal here is to allow the driver to continue and not crash
the machine with use-after-free error.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: pcs: add supported_interfaces bitmap for PCS
This series adds supported_interfaces for PCS, which gives MAC code
a way to determine the interface modes that the PCS supports without
having to implement functions such as xpcs_get_interfaces(), or
workarounds such as in
https://lore.kernel.org/20241213090526.71516-3-maxime.chevallier@bootlin.com
Patch 1 adds the new bitmask to struct phylink_pcs, and code within
phylink to validate that the PCS returned by the MAC driver supports
the interface mode - but only if this bitmask is non-empty.
Patch 2 through 4 fills in the interface modes for XPCS, Mediatek LynxI
and Lynx PCS.
Patch 5 adds support to stmmac to make use of this bitmask when filling
in phylink_config.supported_interfaces, eliminating the call to
xpcs_get_interfaces.
As xpcs_get_interfaces() is now unused outside of pcs-xpcs.c, patch 6
makes this function static and removes it from the header file.
====================
Link: https://patch.msgid.link/Z3fG9oTY9F9fCYHv@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for the PCS to specify which interfaces it supports, which
can be used by MAC drivers to build the main supported_interfaces
bitmap. Phylink also validates that the PCS returned by the MAC driver
supports the interface that the MAC was asked for.
An empty supported_interfaces bitmap from the PCS indicates that it
does not provide this information, and we handle that appropriately.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tTffL-007RoD-1Y@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
i40e_read_phy_register() and i40e_write_phy_register() were added in
2016 by
commit f62ba91458 ("i40e: Add functions which apply correct PHY access
method for read and write operation")
but haven't been used.
Remove them.
(There are more specific _clause* variants of these functions
that are still used.)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250102173717.200359-4-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
