Furong Xu says:
====================
net: stmmac: Refactor FPE as a separate module
Refactor FPE implementation by moving common code for DWMAC4 and
DWXGMAC into a separate FPE module.
FPE implementation for DWMAC4 and DWXGMAC differs only for:
1) Offset address of MAC_FPE_CTRL_STS and MTL_FPE_CTRL_STS
2) FPRQ(Frame Preemption Residue Queue) field in MAC_RxQ_Ctrl1
3) Bit offset of Frame Preemption Interrupt Enable
Tested on DWMAC CORE 5.20a and DWXGMAC CORE 3.20a
====================
Link: https://patch.msgid.link/cover.1730449003.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FPE implementation for DWMAC4 and DWXGMAC differs only for:
1) Offset address of MAC_FPE_CTRL_STS and MTL_FPE_CTRL_STS
2) FPRQ(Frame Preemption Residue Queue) field in MAC_RxQ_Ctrl1
3) Bit offset of Frame Preemption Interrupt Enable
Refactor FPE functions to avoid code duplication and
to simplify the code flow by avoiding the use of
function pointers.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/49de4607bae69ffe751b13329a3c07a990b82419.1730449003.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit says:
====================
r8169: align RTL8125/RTL8126 PHY config with vendor driver
This series aligns the RTL8125/RTL8126 PHY config with vendor drivers
r8125 and r8126 respectively.
====================
Link: https://patch.msgid.link/7a849c7c-50ff-4a9b-9a1c-a963b0561c79@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-10-31
We've added 13 non-merge commits during the last 16 day(s) which contain
a total of 16 files changed, 710 insertions(+), 668 deletions(-).
The main changes are:
1) Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it, from Puranjay Mohan.
2) Rewrite and migrate the test_tcp_check_syncookie.sh BPF selftest
into test_progs so that it can be run in BPF CI, from Alexis Lothoré.
3) Two BPF sockmap selftest fixes, from Zijian Zhang.
4) Small XDP synproxy BPF selftest cleanup to remove IP_DF check,
from Vincent Li.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add a selftest for bpf_csum_diff()
selftests/bpf: Don't mask result of bpf_csum_diff() in test_verifier
bpf: bpf_csum_diff: Optimize and homogenize for all archs
net: checksum: Move from32to16() to generic header
selftests/bpf: remove xdp_synproxy IP_DF check
selftests/bpf: remove test_tcp_check_syncookie
selftests/bpf: test MSS value returned with bpf_tcp_gen_syncookie
selftests/bpf: add ipv4 and dual ipv4/ipv6 support in btf_skc_cls_ingress
selftests/bpf: get rid of global vars in btf_skc_cls_ingress
selftests/bpf: add missing ns cleanups in btf_skc_cls_ingress
selftests/bpf: factorize conn and syncookies tests in a single runner
selftests/bpf: Fix txmsg_redir of test_txmsg_pull in test_sockmap
selftests/bpf: Fix msg_verify_data in test_sockmap
====================
Link: https://patch.msgid.link/20241031221543.108853-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net_dim() is currently passed a struct dim_sample argument by value.
struct dim_sample is 24 bytes. Since this is greater 16 bytes, x86-64
passes it on the stack. All callers have already initialized dim_sample
on the stack, so passing it by value requires pushing a duplicated copy
to the stack. Either witing to the stack and immediately reading it, or
perhaps dereferencing addresses relative to the stack pointer in a chain
of push instructions, seems to perform quite poorly.
In a heavy TCP workload, mlx5e_handle_rx_dim() consumes 3% of CPU time,
94% of which is attributed to the first push instruction to copy
dim_sample on the stack for the call to net_dim():
// Call ktime_get()
0.26 |4ead2: call 4ead7 <mlx5e_handle_rx_dim+0x47>
// Pass the address of struct dim in %rdi
|4ead7: lea 0x3d0(%rbx),%rdi
// Set dim_sample.pkt_ctr
|4eade: mov %r13d,0x8(%rsp)
// Set dim_sample.byte_ctr
|4eae3: mov %r12d,0xc(%rsp)
// Set dim_sample.event_ctr
0.15 |4eae8: mov %bp,0x10(%rsp)
// Duplicate dim_sample on the stack
94.16 |4eaed: push 0x10(%rsp)
2.79 |4eaf1: push 0x10(%rsp)
0.07 |4eaf5: push %rax
// Call net_dim()
0.21 |4eaf6: call 4eafb <mlx5e_handle_rx_dim+0x6b>
To allow the caller to reuse the struct dim_sample already on the stack,
pass the struct dim_sample by reference to net_dim().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://patch.msgid.link/20241031002326.3426181-2-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
selftest: netconsole: Enhance selftest to validate userdata transmission
The netconsole selftest has been extended to cover userdata, a
significant subsystem within netconsole. This patch introduces support
for testing userdata by appending a key-value pair and verifying its
successful transmission via netconsole/netpoll.
Additionally, this patchseries addresses a pending change in the subnet
configuration for the selftest.
v1: https://lore.kernel.org/20241025161415.238215-1-leitao@debian.org
====================
Link: https://patch.msgid.link/20241029090030.1793551-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend netcons_basic selftest to verify the userdata functionality by:
1. Creating a test key in the userdata configfs directory
2. Writing a known value to the key
3. Validating the key-value pair appears in the captured network output
This ensures the userdata feature is properly tested during selftests.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20241029090030.1793551-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lorenzo Bianconi says:
====================
Simplify Tx napi logic in airoha_eth driver
Simplify Tx napi logic relying on the packet index provided by
completion queue indicating the completed packet that can be removed
from the Tx DMA ring.
Read completion queue head and pending entry in airoha_qdma_tx_napi_poll().
====================
Link: https://patch.msgid.link/20241029-airoha-en7581-tx-napi-work-v1-0-96ad1686b946@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gustavo A. R. Silva says:
====================
UAPI: net/ethtool: Avoid thousands of -Wflex-array-member-not-at-end warnings
Small patch series aimed at fixing thousands of -Wflex-array-member-not-at-end
warnings by creating a new tagged struct within a flexible structure. We then
use this new struct type to fix problematic middle-flex-array declarations in
multiple composite structs, as well as to update the type of some variables in
various functions.
v1: https://lore.kernel.org/cover.1729536776.git.gustavoars@kernel.org
====================
Link: https://patch.msgid.link/cover.1730238285.git.gustavoars@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Change the type of the middle struct member currently causing trouble from
`struct ethtool_link_settings` to `struct ethtool_link_settings_hdr`.
Additionally, update the type of some variables in various functions that
don't access the flexible-array member, changing them to the newly created
`struct ethtool_link_settings_hdr`. These changes are needed because the
type of the conflicting middle members changed. So, those instances that
expect the type to be `struct ethtool_link_settings` should be adjusted to
the newly created type `struct ethtool_link_settings_hdr`.
Also, adjust variable declarations to follow the reverse xmas tree
convention.
Fix 3338 of the following -Wflex-array-member-not-at-end warnings:
include/linux/ethtool.h:214:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/0bc2809fe2a6c11dd4c8a9a10d9bd65cccdb559b.1730238285.git.gustavoars@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the `__struct_group()` helper to create a new tagged
`struct ethtool_link_settings_hdr`. This structure groups together
all the members of the flexible `struct ethtool_link_settings`
except the flexible array. As a result, the array is effectively
separated from the rest of the members without modifying the memory
layout of the flexible structure.
This new tagged struct will be used to fix problematic declarations
of middle-flex-arrays in composite structs[1].
[1] https://git.kernel.org/linus/d88cabfd9abc
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/9e9fb0bd72e5ba1e916acbb4995b1e358b86a689.1730238285.git.gustavoars@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yafang Shao says:
====================
Add noinline_for_tracing and apply it to tcp_drop_reason
This patchset introduces a new compiler annotation, noinline_for_tracing,
designed to prevent specific functions from being inlined to facilitate
tracing. In Patch #2, this annotation is applied to the tcp_drop_reason().
====================
Link: https://patch.msgid.link/20241024093742.87681-1-laoar.shao@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
