The dependency will be checked anyway after Kbuild descends into a
sub-directory. Skip object/source dependency checks in top Makefile.
VPATH can be simpler since the top Makefile no longer checks the
presence of the source file, which is located in in the external
module directory.
One good thing is, it can compile an object from a generated source
file.
$ make crypto/rsapubkey.asn1.o
...
ASN.1 crypto/rsapubkey.asn1.c
CC crypto/rsapubkey.asn1.o
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The previous commit made 'MAKEFLAGS += -rR' effective in the top
Makefile regardless of O= option, GNU Make versions.
The top Makefile does not need to cancel implicit rules for makefiles.
There is still one place where an empty rule is useful. Since -rR is
effective only after sub-make, GNU Make would try implicit rules to
update the top Makefile. Although it is not a big overhead, cancel it
just in case.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Adding -rR to MAKEFLAGS is important because we do not want to
be bothered by built-in implicit rules or variables.
One problem that used to exist in older GNU Make versions is
MAKEFLAGS += -rR
... does not become effective in the current Makefile. When you are
building with O= option, it becomes effective in the top Makefile
since it recurses via 'sub-make' target. Otherwise, the top Makefile
tries implicit rules. That is why we explicitly add empty rules for
Makefiles, but we often miss to do that.
In fact, adding -d option to older GNU Make versions shows it is
trying a bunch of implicit pattern rules.
Considering target file `scripts/Makefile.kcov'.
Looking for an implicit rule for `scripts/Makefile.kcov'.
Trying pattern rule with stem `Makefile.kcov'.
Trying implicit prerequisite `scripts/Makefile.kcov.o'.
Trying pattern rule with stem `Makefile.kcov'.
Trying implicit prerequisite `scripts/Makefile.kcov.c'.
Trying pattern rule with stem `Makefile.kcov'.
Trying implicit prerequisite `scripts/Makefile.kcov.cc'.
Trying pattern rule with stem `Makefile.kcov'.
Trying implicit prerequisite `scripts/Makefile.kcov.C'.
...
This issue was fixed by GNU Make commit 58dae243526b ("[Savannah #20501]
Handle adding -r/-R to MAKEFLAGS in the makefile"). So, it is no longer
a problem if you use GNU Make 4.0 or later. However, older versions are
still widely used.
So, I decided to patch the kernel Makefile to invoke sub-make regardless
of O= option. This will allow further cleanups.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since -Wmaybe-uninitialized was introduced by GCC 4.7, we have patched
various false positives:
- commit e74fc973b6 ("Turn off -Wmaybe-uninitialized when building
with -Os") turned off this option for -Os.
- commit 815eb71e71 ("Kbuild: disable 'maybe-uninitialized' warning
for CONFIG_PROFILE_ALL_BRANCHES") turned off this option for
CONFIG_PROFILE_ALL_BRANCHES
- commit a76bcf557e ("Kbuild: enable -Wmaybe-uninitialized warning
for "make W=1"") turned off this option for GCC < 4.9
Arnd provided more explanation in https://lkml.org/lkml/2017/3/14/903
I think this looks better by shifting the logic from Makefile to Kconfig.
Link: https://github.com/ClangBuiltLinux/linux/issues/350
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
- $(word 1, <text>) is equivalent to $(firstword <text>)
- hardcode "gcc" instead of $(CC)
- minimize the shell script part
A little more notes in case $(filter-out -%, ...) is not clear.
arch/mips/Makefile passes prefixes depending on the configuration.
CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux- \
$(tool-archpref)-linux-gnu- $(tool-archpref)-unknown-linux-gnu-)
In the Kconfig stage (e.g. when you run 'make defconfig'), neither
CONFIG_32BIT nor CONFIG_64BIT is defined. So, $(tool-archpref) is
empty. As a result, "-linux -linux-gnu- -unknown-linux-gnu" is passed
into cc-cross-prefix. The command 'which' assumes arguments starting
with a hyphen as command options, then emits the following messages:
Illegal option -l
Illegal option -l
Illegal option -u
I think it is strange to define CROSS_COMPILE depending on the CONFIG
options since you need to feed $(CC) to Kconfig, but it is how MIPS
Makefile currently works. Anyway, it would not hurt to filter-out
invalid strings beforehand.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The genksyms source was integrated into the kernel tree in 2003.
I do not expect anybody still using the external /sbin/genksyms.
Kbuild does not need to provide the ability to override GENKSYMS.
Let's remove the GENKSYMS variable, and use the hardcoded path.
Since it occurred in the pre-git era, I attached the commit message
in case somebody is interested in the historical background.
| Author: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>
| Date: Wed Feb 19 04:17:28 2003 -0600
|
| kbuild: [PATCH] put genksyms in scripts dir
|
| This puts genksyms into scripts/genksyms/.
|
| genksyms used to be maintained externally, though the only possible user
| was the kernel build. Moving it into the kernel sources makes it easier to
| keep it uptodate, like for example updating it to generate linker scripts
| directly instead of postprocessing the generated header file fragments
| with sed, as we do currently.
|
| Also, genksyms does not handle __typeof__, which needs to be fixed since
| some of the exported symbol in the kernel are defined using __typeof__.
|
| (Rusty Russell/me)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
gdb-scripts is not a real object, but (ab)used like a phony target.
Rewrite the code in a more Kbuild-ish way. Add symlinks to extra-y
and use if_changed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Currently, Kbuild descends from scripts/Makefile to scripts/gdb/Makefile
just for creating symbolic links, but it does not need to do it so early.
Merge the two descending paths to simplify the code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Every time we add/remove a target, we need to touch the header part,
including renumbering. This is not so important information.
Numbering targets is rather misleading because they are not necessarily
generated in this order. For example, 1) and 2) can be executed
simultaneously when the -j option is given.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
scripts/gdb/linux/constants.py is never used in the kernel build
process. There is no good reason to create it so early.
Get it out of the 'prepare' stage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Commit 06300b21f4 ("kbuild: support building individual files for
external modules") introduced the '/' target. It works only for
external modules to build all .o files, but skip the modpost stage.
However, 'make /' looks a bit weird to me. 'make ./' is more sensible
if you want to build all objects under the current directory, and it
works as expected.
Let's change '/' into a phony target that is an alias of './', but
I may feel like deprecating it in the future.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It is fine to set KBUILD_MODULES=1 when CONFIG_MODULES is disabled.
It is actually how "make allnoconfig all" works.
On the other hand, KBUILD_MODULES=1 is unneeded for the %.ko pattern.
It is just a matter of whether modules.order is generated or not.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
'$(MAKE) KBUILD_SRC=' changes the working directory back and forth
between objtree and srctree.
It is better to recurse to the top-level Makefile directly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This causes an issue when trying to build with `make LD=ld.lld` if
ld.lld and the rest of your cross tools aren't in the same directory
(ex. /usr/local/bin) (as is the case for Android's build system), as the
GCC_TOOLCHAIN_DIR then gets set based on `which $(LD)` which will point
where LLVM tools are, not GCC/binutils tools are located.
Instead, select the GCC_TOOLCHAIN_DIR based on another tool provided by
binutils for which LLVM does not provide a substitute for, such as
elfedit.
Fixes: 785f11aa59 ("kbuild: Add better clang cross build support")
Link: https://github.com/ClangBuiltLinux/linux/issues/341
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Fix the following sparse warnings:
scripts/kallsyms.c:65:5: warning: symbol 'token_profit' was not declared. Should it be static?
scripts/kallsyms.c:68:15: warning: symbol 'best_table' was not declared. Should it be static?
scripts/kallsyms.c:69:15: warning: symbol 'best_table_len' was not declared. Should it be static?
Also, remove 'inline' from is_arm_mapping_symbol(). The compiler
will inline it anyway when it is appropriate to do so.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When compiling into output directory using O=, many files
created under KBUILD_OUTPUT that git considers
as new ones; git clients, ex. "git gui" lists it, and it clutters
file list making it difficult to see what was really changed
Generate .gitignore in output directory that ignores all
its content
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@linux.intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is no build order among the following:
prepare3
outputmakefile
asm-generic
$(version_h)
$(autoksyms_h)
include/generated/utsrelease.h
It is meaningless to insert the prepare2 target between the first
three and the last three.
The comment says, "prepare2 creates a makefile if using a separate
output directory." Let me explain it more precisely. The prepare
targets cannot be executed without the .config file. Because the
configuration targets depend on the outputmakefile target, the
generated makefile is already there before the parepare2 is run.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The commands surrounded by ( ) are executed in a subshell, but in
most cases, we do not need to spawn an extra subshell.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In Kbuild, if_changed and friends must have FORCE as a prerequisite.
Hence, $(filter-out FORCE,$^) or $(filter-out $(PHONY),$^) is a common
idiom to get the names of all the prerequisites except phony targets.
Add real-prereqs as a shorthand.
Note:
We cannot replace $(filter %.o,$^) in cmd_link_multi-m because $^ may
include auto-generated dependencies from the .*.cmd file when a single
object module is changed into a multi object module. Refer to commit
69ea912fda ("kbuild: remove unneeded link_multi_deps"). I added some
comment to avoid accidental breakage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
When I was refactoring cmd_ar_builtin in scripts/Makefile.build,
I noticed the build breakage of s390.
Some Makefiles of s390 add extra dependencies to built-in.a;
built-in.a depends on timestamp files *.o.chkbss, but $(AR) does
not want to include them into built-in.a.
Insert a phony target 'chkbss' in between so that $(AR) can take
$(filter-out $(PHONY), $^) as input.
While I was here, I refactored Makefile.chkbss a little bit.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
All the callers of size_append pass $(filter-out FORCE,$^).
Move $(filter-out FORCE,$^) to the definition of size_append.
This makes the callers cleaner because $(call ...) is unneeded
for a macro with no argument.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The top Makefile does not need to export KBUILD_VMLINUX_INIT and
KBUILD_VMLINUX_MAIN separately.
Put every built-in.a into KBUILD_VMLINUX_OBJS. The order of
$(head-y), $(init-y), $(core-y), ... is still retained.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The symbol table in the final archive is unneeded; the linker does not
require the symbol table after the --whole-archive option. Every object
file in the archive is included in the link anyway.
Pass thin archives from subdirectories directly to the linker, and
remove the final archiving step.
Fix up the document and comments as well.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
When building an external module, $(obj) is the absolute path to it.
The header search paths from ccflags-y etc. should not be tweaked.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Fix the swapped outb() parameters in the KASLR code
- Fix the PKEY handling at fork which missed to preserve the pkey
state for the child. Comes with a test case to validate that.
- Fix the entry stack handling for XEN PV to respect that XEN PV
systems enter the function already on the current thread stack and
not on the trampoline.
- Fix kexec load failure caused by using a stale value when the
kexec_buf structure is reused for subsequent allocations.
- Fix a bogus sizeof() in the memory encryption code
- Enforce PCI dependency for the Intel Low Power Subsystem
- Enforce PCI_LOCKLESS_CONFIG when PCI is enabled"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabled
x86/entry/64/compat: Fix stack switching for XEN PV
x86/kexec: Fix a kexec_file_load() failure
x86/mm/mem_encrypt: Fix erroneous sizeof()
x86/selftests/pkeys: Fork() to check for state being preserved
x86/pkeys: Properly copy pkey state at fork()
x86/kaslr: Fix incorrect i8254 outb() parameters
x86/intel/lpss: Make PCI dependency explicit
Pull x86 timer fixes from Thomas Gleixner:
"Two commits which were missed to be sent during the merge window.
- The TSC calibration fix turns out to be more urgent as recent
Skylake-X systems seem to have massive trouble with calibration
disturbance. This should go back into stable for that reason and it
the risk of breakage is rather low.
- Drop an unused define"
* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hpet: Remove unused FSEC_PER_NSEC define
x86/tsc: Make calibration refinement more robust
Pull timer fix from Thomas Glexiner:
"A single regression fix to address the unintended breakage of posix
cpu timers.
This is caused by a new sanity check in the common code, which fails
for posix cpu timers under certain conditions because the posix cpu
timer code never updates the variable which is checked"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Unbreak timer rearming
Pull locking fixes from Thomas Gleixner:
"A small series of fixes which all address possible missed wakeups:
- Document and fix the wakeup ordering of wake_q
- Add the missing barrier in rcuwait_wake_up(), which was documented
in the comment but missing in the code
- Fix the possible missed wakeups in the rwsem and futex code"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Fix (possible) missed wakeup
futex: Fix (possible) missed wakeup
sched/wake_q: Fix wakeup ordering for wake_q
sched/wake_q: Document wake_q_add()
sched/wait: Fix rcuwait_wake_up() ordering
Pull irq fixes from Thomas Gleixner:
"A small set of fixes for the interrupt subsystem:
- Fix a double increment in the irq descriptor allocator which
resulted in a sanity check only being done for every second
affinity mask
- Add a missing device tree translation in the stm32-exti driver.
Without that the interrupt association is completely wrong.
- Initialize the mutex in the GIC-V3 MBI driver
- Fix the alignment for aliasing devices in the GIC-V3-ITS driver so
multi MSI allocations work correctly
- Ensure that the initial affinity of a interrupt is not empty at
startup time.
- Drop bogus include in the madera irq chip driver
- Fix KernelDoc regression"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size
genirq/irqdesc: Fix double increment in alloc_descs()
genirq: Fix the kerneldoc comment for struct irq_affinity_desc
irqchip/madera: Drop GPIO includes
irqchip/gic-v3-mbi: Fix uninitialized mbi_lock
irqchip/stm32-exti: Add domain translate function
genirq: Make sure the initial affinity is not empty
Pull block revert from Jens Axboe:
"Silly error snuck into a patch from the last series, let's do a revert
to avoid a potential use-after-free"
* tag 'for-linus-20190127' of git://git.kernel.dk/linux-block:
Revert "block: cover another queue enter recursion via BIO_QUEUE_ENTERED"
Pull KVM fixes from Paolo Bonzini:
"Quite a few fixes for x86: nested virtualization save/restore, AMD
nested virtualization and virtual APIC, 32-bit fixes, an important fix
to restore operation on older processors, and a bunch of hyper-v
bugfixes. Several are marked stable.
There are also fixes for GCC warnings and for a GCC/objtool interaction"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Mark expected switch fall-throughs
KVM: x86: fix TRACE_INCLUDE_PATH and remove -I. header search paths
KVM: selftests: check returned evmcs version range
x86/kvm/hyper-v: nested_enable_evmcs() sets vmcs_version incorrectly
KVM: VMX: Move vmx_vcpu_run()'s VM-Enter asm blob to a helper function
kvm: selftests: Fix region overlap check in kvm_util
kvm: vmx: fix some -Wmissing-prototypes warnings
KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1
svm: Fix AVIC incomplete IPI emulation
svm: Add warning message for AVIC IPI invalid target
KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal error
KVM: x86: Fix PV IPIs for 32-bit KVM host
x86/kvm/hyper-v: recommend using eVMCS only when it is enabled
x86/kvm/hyper-v: don't recommend doing reset via synthetic MSR
kvm: x86/vmx: Use kzalloc for cached_vmcs12
KVM: VMX: Use the correct field var when clearing VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL
KVM: x86: Fix single-step debugging
x86/kvm/hyper-v: don't announce GUEST IDLE MSR support
Pull dma-mapping fix from Christoph Hellwig:
"Fix a xen-swiotlb regression on arm64"
* tag 'dma-mapping-5.0-2' of git://git.infradead.org/users/hch/dma-mapping:
arm64/xen: fix xen-swiotlb cache flushing
Pull libnvdimm fixes from Dan Williams:
"A fix for namespace label support for non-Intel NVDIMMs that implement
the ACPI standard label method.
This has apparently never worked and could wait for v5.1. However it
has enough visibility with hardware vendors [1] and distro bug
trackers [2], and low enough risk that I decided it should go in for
-rc4. The other fixups target the new, for v5.0, nvdimm security
functionality. The larger init path fixup closes a memory leak and a
potential userspace lockup due to missed notifications.
[1] https://github.com/pmem/ndctl/issues/78
[2] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1811785
These have all soaked in -next for a week with no reported issues.
Summary:
- Fix support for NVDIMMs that implement the ACPI standard label
methods.
- Fix error handling for security overwrite (memory leak / userspace
hang condition), and another one-line security cleanup"
* tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
acpi/nfit: Fix command-supported detection
acpi/nfit: Block function zero DSMs
libnvdimm/security: Require nvdimm_security_setup_events() to succeed
nfit_test: fix security state pull for nvdimm security nfit_test
Pull input fixes from Dmitry Torokhov:
"A fixup for the input_event fix for y2038 Sparc64, and couple other
minor fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: input_event - fix the CONFIG_SPARC64 mixup
Input: olpc_apsp - assign priv->dev earlier
Input: uinput - fix undefined behavior in uinput_validate_absinfo()
Input: raspberrypi-ts - fix link error
Input: xpad - add support for SteelSeries Stratus Duo
Input: input_event - provide override for sparc64
Pull networking fixes from David Miller:
1) Count ttl-dropped frames properly in mac80211, from Bob Copeland.
2) Integer overflow in ktime handling of bcm can code, from Oliver
Hartkopp.
3) Fix RX desc handling wrt. hw checksumming in ravb, from Simon
Horman.
4) Various hash key fixes in hv_netvsc, from Haiyang Zhang.
5) Use after free in ax25, from Eric Dumazet.
6) Several fixes to the SSN support in SCTP, from Xin Long.
7) Do not process frames after a NAPI reschedule in ibmveth, from
Thomas Falcon.
8) Fix NLA_POLICY_NESTED arguments, from Johannes Berg.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits)
qed: Revert error handling changes.
cfg80211: extend range deviation for DMG
cfg80211: reg: remove warn_on for a normal case
mac80211: Add attribute aligned(2) to struct 'action'
mac80211: don't initiate TDLS connection if station is not associated to AP
nl80211: fix NLA_POLICY_NESTED() arguments
ibmveth: Do not process frames after calling napi_reschedule
net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP
net: usb: asix: ax88772_bind return error when hw_reset fail
MAINTAINERS: Update cavium networking drivers
net/mlx4_core: Fix error handling when initializing CQ bufs in the driver
net/mlx4_core: Add masking for a few queries on HCA caps
sctp: set flow sport from saddr only when it's 0
sctp: set chunk transport correctly when it's a new asoc
sctp: improve the events for sctp stream adding
sctp: improve the events for sctp stream reset
ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel
ax25: fix possible use-after-free
sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe
hv_netvsc: fix typos in code comments
...
Pull smb3 fixes from Steve French:
"A set of small smb3 fixes, some fixing various crediting issues
discovered during xfstest runs, five for stable"
* tag '5.0-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: print CIFSMaxBufSize as part of /proc/fs/cifs/DebugData
smb3: add credits we receive from oplock/break PDUs
CIFS: Fix mounts if the client is low on credits
CIFS: Do not assume one credit for async responses
CIFS: Fix credit calculations in compound mid callback
CIFS: Fix credit calculation for encrypted reads with errors
CIFS: Fix credits calculations for reads with errors
CIFS: Do not reconnect TCP session in add_credits()
smb3: Cleanup license mess
CIFS: Fix possible hang during async MTU reads and writes
cifs: fix memory leak of an allocated cifs_ntsd structure
Pull VFIO fixes from Alex Williamson:
- cleanup licenses in new files (Thomas Gleixner)
- cleanup new compiler warnings (Alexey Kardashevskiy)
* tag 'vfio-v5.0-rc4' of git://github.com/awilliam/linux-vfio:
vfio-pci/nvlink2: Fix ancient gcc warnings
vfio/pci: Cleanup license mess
Pull SCSI fixes from James Bottomley:
"Six fixes, all of which appear to have user visible consequences.
The DMA one is a regression fix from the merge window and of the
others, four are driver specific and one specific to the target code"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: Use explicit access size in ufshcd_dump_regs
scsi: tcmu: fix use after free
scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetport
scsi: lpfc: nvme: avoid hang / use-after-free when destroying localport
scsi: communicate max segment size to the DMA mapping code
Pull block fixes from Jens Axboe:
"A collection of fixes for this release. This contains:
- Silence sparse rightfully complaining about non-static wbt
functions (Bart)
- Fixes for the zoned comments/ioctl documentation (Damien)
- direct-io fix that's been lingering for a while (Ernesto)
- cgroup writeback fix (Tejun)
- Set of NVMe patches for nvme-rdma/tcp (Sagi, Hannes, Raju)
- Block recursion tracking fix (Ming)
- Fix debugfs command flag naming for a few flags (Jianchao)"
* tag 'for-linus-20190125' of git://git.kernel.dk/linux-block:
block: Fix comment typo
uapi: fix ioctl documentation
blk-wbt: Declare local functions static
blk-mq: fix the cmd_flag_name array
nvme-multipath: drop optimization for static ANA group IDs
nvmet-rdma: fix null dereference under heavy load
nvme-rdma: rework queue maps handling
nvme-tcp: fix timeout handler
nvme-rdma: fix timeout handler
writeback: synchronize sync(2) against cgroup writeback membership switches
block: cover another queue enter recursion via BIO_QUEUE_ENTERED
direct-io: allow direct writes to empty inodes
Pull MMC fixes from Ulf Hansson:
- sdhci-acpi: Fixup build dependency for PCI
- sdhci-omap: Resolve Kconfig warnings on keystone
- sdhci-iproc: Propagate errors from DT parsing
- meson-gx: Fixup IRQ handling in release callback
- meson-gx: Use signal re-sampling to fixup tuning
- dw_mmc-bluefield: Fix the license information
* tag 'mmc-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: dw_mmc-bluefield: : Fix the license information
mmc: meson-gx: enable signal re-sampling together with tuning
mmc: sdhci-iproc: handle mmc_of_parse() errors during probe
mmc: meson-gx: Free irq in release() callback
mmc: host: Fix Kconfig warnings on keystone_defconfig
mmc: sdhci-acpi: Make PCI dependency explicit
