Track the mask of "unavailable" PMU events as a 32-bit value. While bits
31:9 are currently reserved, silently truncating those bits is unnecessary
and asking for missed coverage. To avoid running afoul of the sanity check
in vcpu_set_cpuid_property(), explicitly adjust the mask based on the
non-reserved bits as reported by KVM's supported CPUID.
Opportunistically update the "all ones" testcase to pass -1u instead of
0xff.
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20250919214648.1585683-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
A new bit PERF_CAPABILITIES[17] called "PEBS_TIMING_INFO" bit is added
to indicated if PEBS supports to record timing information in a new
"Retried Latency" field.
Since KVM requires user can only set host consistent PEBS capabilities,
otherwise the PERF_CAPABILITIES setting would fail, add pebs_timing_info
into the "immutable_caps" to block host inconsistent PEBS configuration
and cause errors.
Opportunistically drop the anythread_deprecated bit. It isn't and likely
never was a PERF_CAPABILITIES flag, the test's definition snuck in when
the union was copy+pasted from the kernel's definition.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
[sean: call out anythread_deprecated change]
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20250919214648.1585683-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add stress tests for BPF task-work scheduling kfuncs. The tests spawn
multiple threads that concurrently schedule task_work callbacks against
the same and different map values to exercise the kfuncs under high
contention.
Verify callbacks are reliably enqueued and executed with no drops.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20250923112404.668720-10-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Exercise the scenario described in detail in the cover letter:
1) socket A: connect() from ephemeral port X
2) socket B: explicitly bind() to port X
3) check that port X is now excluded from ephemeral ports
4) close socket B to release the port bind
5) socket C: connect() from ephemeral port X
As well as a corner case to test that the connect-bind flag is cleared:
1) connect() from ephemeral port X
2) disconnect the socket with connect(AF_UNSPEC)
3) bind() it explicitly to port X
4) check that port X is now excluded from ephemeral ports
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20250917-update-bind-bucket-state-on-unhash-v5-2-57168b661b47@cloudflare.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test harness uses the verify_sig_setup.sh to generate the required
key material for program signing.
Generate key material for signing LSKEL some lskel programs and use
xxd to convert the verification certificate into a C header file.
Finally, update the main test runner to load this
certificate into the session keyring via the add_key() syscall before
executing any tests. Use the session keyring in the tests with signed
programs.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20250921160120.9711-6-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This attribute is a boolean. No need to add it to set it to 'false'.
Indeed, the default value when this attribute is not set is naturally
'false'. A few bytes can then be saved by not adding this attribute if
the connection is not on the server side.
This prepares the future deprecation of its attribute, in favour of a
new flag.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250919-net-next-mptcp-server-side-flag-v1-1-a97a5d561a8b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Quoted from musl wiki:
GNU getopt permutes argv to pull options to the front, ahead of
non-option arguments. musl and the POSIX standard getopt stop
processing options at the first non-option argument with no
permutation.
Thus these scripts stop working on musl since non-option arguments for
tools using getopt() (in this case, (ar)ping) do not always come last.
Fix it by reordering arguments.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250919053538.1106753-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull iommufd fixes from Jason Gunthorpe:
"Fix two user triggerable use-after-free issues:
- Possible race UAF setting up mmaps
- Syzkaller found UAF when erroring an file descriptor creation ioctl
due to the fput() work queue"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Update the fail_nth limit
iommufd: WARN if an object is aborted with an elevated refcount
iommufd: Fix race during abort for file descriptors
iommufd: Fix refcounting race during mmap
Remove the IsBranch flag from ENTER and LEAVE in KVM's emulator, as ENTER
and LEAVE are stack operations, not branches. Add forced emulation of
said instructions to the PMU counters test to prove that KVM diverges from
hardware, and to guard against regressions.
Opportunistically add a missing "1 MOV" to the selftest comment regarding
the number of instructions per loop, which commit 7803339fa9 ("KVM:
selftests: Use data load to trigger LLC references/misses in Intel PMU")
forgot to add.
Fixes: 018d70ffcf ("KVM: x86: Update vPMCs when retiring branch instructions")
Cc: Jim Mattson <jmattson@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20250919004639.1360453-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The test will fail as below on x86_64 with cpu la57 support (will skip if
no la57 support). Note, the test requries nr_hugepages to be set first.
# running bash ./va_high_addr_switch.sh
# -------------------------------------
# mmap(addr_switch_hint - pagesize, pagesize): 0x7f55b60fa000 - OK
# mmap(addr_switch_hint - pagesize, (2 * pagesize)): 0x7f55b60f9000 - OK
# mmap(addr_switch_hint, pagesize): 0x800000000000 - OK
# mmap(addr_switch_hint, 2 * pagesize, MAP_FIXED): 0x800000000000 - OK
# mmap(NULL): 0x7f55b60f9000 - OK
# mmap(low_addr): 0x40000000 - OK
# mmap(high_addr): 0x1000000000000 - OK
# mmap(high_addr) again: 0xffff55b6136000 - OK
# mmap(high_addr, MAP_FIXED): 0x1000000000000 - OK
# mmap(-1): 0xffff55b6134000 - OK
# mmap(-1) again: 0xffff55b6132000 - OK
# mmap(addr_switch_hint - pagesize, pagesize): 0x7f55b60fa000 - OK
# mmap(addr_switch_hint - pagesize, 2 * pagesize): 0x7f55b60f9000 - OK
# mmap(addr_switch_hint - pagesize/2 , 2 * pagesize): 0x7f55b60f7000 - OK
# mmap(addr_switch_hint, pagesize): 0x800000000000 - OK
# mmap(addr_switch_hint, 2 * pagesize, MAP_FIXED): 0x800000000000 - OK
# mmap(NULL, MAP_HUGETLB): 0x7f55b5c00000 - OK
# mmap(low_addr, MAP_HUGETLB): 0x40000000 - OK
# mmap(high_addr, MAP_HUGETLB): 0x1000000000000 - OK
# mmap(high_addr, MAP_HUGETLB) again: 0xffff55b5e00000 - OK
# mmap(high_addr, MAP_FIXED | MAP_HUGETLB): 0x1000000000000 - OK
# mmap(-1, MAP_HUGETLB): 0x7f55b5c00000 - OK
# mmap(-1, MAP_HUGETLB) again: 0x7f55b5a00000 - OK
# mmap(addr_switch_hint - pagesize, 2*hugepagesize, MAP_HUGETLB): 0x800000000000 - FAILED
# mmap(addr_switch_hint , 2*hugepagesize, MAP_FIXED | MAP_HUGETLB): 0x800000000000 - OK
# [FAIL]
addr_switch_hint is defined as DFEFAULT_MAP_WINDOW in the failed test (for
x86_64, DFEFAULT_MAP_WINDOW is defined as (1UL<<47) - pagesize) in 64 bit.
Before commit cc92882ee2 ("mm: drop hugetlb_get_unmapped_area{_*}
functions"), for x86_64 hugetlb_get_unmapped_area() is handled in arch
code arch/x86/mm/hugetlbpage.c and addr is checked with
map_address_hint_valid() after align with 'addr &= huge_page_mask(h)'
which is a round down way, and it will fail the check because the addr is
within the DEFAULT_MAP_WINDOW but (addr + len) is above the
DFEFAULT_MAP_WINDOW. So it wil go through the
hugetlb_get_unmmaped_area_top_down() to find an area within the
DFEFAULT_MAP_WINDOW.
After commit cc92882ee2 ("mm: drop hugetlb_get_unmapped_area{_*}
functions"). The addr hint for hugetlb_get_unmmaped_area() will be
rounded up and aligned to hugepage size with ALIGN() for all arches. And
after the align, the addr will be above the default MAP_DEFAULT_WINDOW,
and the map_addresshint_valid() check will pass because both aligned addr
(addr0) and (addr + len) are above the DEFAULT_MAP_WINDOW, and the aligned
hint address (0x800000000000) is returned as an suitable gap is found
there, in arch_get_unmapped_area_topdown().
To still cover the case that addr is within the DEFAULT_MAP_WINDOW, and
addr + len is above the DFEFAULT_MAP_WINDOW, change to choose the last
hugepage aligned address within the DEFAULT_MAP_WINDOW as the hint addr,
and the addr + len (2 hugepages) will be one hugepage above the
DEFAULT_MAP_WINDOW. An aligned address won't be affected by the page
round up or round down from kernel, so it's determistic.
Link: https://lkml.kernel.org/r/20250912013711.3002969-4-chuhu@redhat.com
Fixes: cc92882ee2 ("mm: drop hugetlb_get_unmapped_area{_*} functions")
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alloc hugepages in the test internally, so we don't fully rely on the
run_vmtests.sh. If run_vmtests.sh does that great, free hugepages is
enough for being used to run the test, leave it as it is, otherwise setup
the hugepages in the test.
Save the original nr_hugepages value and restore it after test finish, so
leave a stable test envronment.
Link: https://lkml.kernel.org/r/20250912013711.3002969-3-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix va_high_addr_switch.sh test failure", v3.
These three patches fix the va_high_addr_switch.sh test failure on x86_64.
Patch 1 fixes the hugepage setup issue that nr_hugepages is reset too
early in run_vmtests.sh and break the later va_high_addr_switch testing.
Patch 2 adds hugepage setup in va_high_addr_switch test, so that it can
still work if vm_runtests.sh changes the hugepage setup someday.
Patch 3 fixes the test failure caused by the hint addr align method change
in hugetlb_get_unmapped_area().
This patch (of 3):
The nr_hugepgs variable is used to keep the original nr_hugepages at the
hugepage setup step at test beginning. After userfaultfd test, a cleaup
is executed, both /sys/kernel/mm/hugepages/hugepages-*/nr_hugepages and
/proc/sys//vm/nr_hugepages are reset to 'original' value before
userfaultfd test starts.
Issue here is the value used to restore /proc/sys/vm/nr_hugepages is
nr_hugepgs which is the initial value before the vm_runtests.sh runs, not
the value before userfaultfd test starts. 'va_high_addr_swith.sh' tests
runs after that will possibly see no hugepages available for test, and got
EINVAL when mmap(HUGETLB), making the result invalid.
And before pkey tests, nr_hugepgs is changed to be used as a temp variable
to save nr_hugepages before pkey test, and restore it after pkey tests
finish. The original nr_hugepages value is not tracked anymore, so no way
to restore it after all tests finish.
Add a new variable orig_nr_hugepgs to save the original nr_hugepages, and
and restore it to nr_hugepages after all tests finish. And change to use
the nr_hugepgs variable to save the /proc/sys/vm/nr_hugeages after
hugepage setup, it's also the value before userfaultfd test starts, and
the correct value to be restored after userfaultfd finishes. The
va_high_addr_switch.sh broken will be resolved.
Link: https://lkml.kernel.org/r/20250912013711.3002969-1-chuhu@redhat.com
Link: https://lkml.kernel.org/r/20250912013711.3002969-2-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is room for improvement, so let's clean up a bit:
(1) Define "4" as a constant.
(2) SKIP if we fail to allocate all THPs (e.g., fragmented) and add
recovery code for all other failure cases: no need to exit the test.
(3) Rename "len" to thp_area_size, and "one_page" to "thp_area".
(4) Allocate a new area "page_area" into which we will mremap the
pages; add "page_area_size". Now we can easily merge the two
mremap instances into a single one.
(5) Iterate THPs instead of bytes when checking for missed THPs after
mremap.
(6) Rename "pte_mapped2" to "tmp", used to verify mremap(MAP_FIXED)
result.
(7) Split the corruption test from the failed-split test, so we can just
iterate bytes vs. thps naturally.
(8) Extend comments and clarify why we are using mremap in the first
place.
Link: https://lkml.kernel.org/r/20250903070253.34556-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements", v2.
One fix for occasional failures I found while testing and a bunch of
cleanups that should make that test easier to digest.
This patch (of 2):
When checking for actual tail or head pages of a folio, we must make sure
that the KPF_COMPOUND_HEAD/KPF_COMPOUND_TAIL flag is paired with KPF_THP.
For example, if we have another large folio after our large folio in
physical memory, our "pfn_flags & (KPF_THP | KPF_COMPOUND_TAIL)" would
trigger even though it's actually a head page of the next folio.
If is_backed_by_folio() returns a wrong result, split_pte_mapped_thp() can
fail with "Some THPs are missing during mremap".
Fix it by checking for head/tail pages of folios properly. Add
folio_tail_flags/folio_head_flags to improve readability and use these
masks also when just testing for any compound page.
Link: https://lkml.kernel.org/r/20250903070253.34556-1-david@redhat.com
Link: https://lkml.kernel.org/r/20250903070253.34556-2-david@redhat.com
Fixes: 169b456b0162 ("selftests/mm: reimplement is_backed_by_thp() with more precise check")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some ublk selftests have strange behavior when fio is not installed.
While most tests behave correctly (run if they don't need fio, or skip
if they need fio), the following tests have different behavior:
- test_null_01, test_null_02, test_generic_01, test_generic_02, and
test_generic_12 try to run fio without checking if it exists first,
and fail on any failure of the fio command (including "fio command
not found"). So these tests fail when they should skip.
- test_stress_05 runs fio without checking if it exists first, but
doesn't fail on fio command failure. This test passes, but that pass
is misleading as the test doesn't do anything useful without fio
installed. So this test passes when it should skip.
Fix these issues by adding _have_program fio checks to the top of all of
these tests.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a spelling mistake in a test message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Every futex selftest uses the kselftest_harness.h helper and don't need
the logging.h file. Delete it.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
futex_numa doesn't really use logging.h helpers, it's only need two
includes from this file. So drop it and include the two missing
includes.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_numa_mpol test to use
kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_priv_hash test to use
kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_waitv test to use
kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_requeue test to use
kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_wait test to use
kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_wait_private_mapped_file
test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_wait_unitialized_heap
test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_wait_wouldblock test to
use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_wait_timeout test to use
kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_requeue_pi_signal_restart
test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_requeue_pi_mismatched_ops
test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_requeue_pi test to use
kselftest_harness header instead of futex's logging header.
Use kselftest fixture feature to make it easy to repeat the same test
with different parameters. With that, drop all repetitive test calls
from run.sh.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Create ksft_print_dbg_msg() so testers can enable extra debug messages
when running a test with the flag -d.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* kvm-arm64/el2-feature-control: (23 commits)
: .
: General rework of EL2 features that can be disabled to satisfy
: the requirement of migration between heterogeneous hosts:
:
: - Handle effective RES0 behaviour of undefined registers, making sure
: that disabling a feature affects full registeres, and not just
: individual control bits. (20250918151402.1665315-1-maz@kernel.org)
:
: - Allow ID_AA64MMFR1_EL1.{TWED,HCX} to be disabled from userspace.
: (20250911114621.3724469-1-yangjinqian1@huawei.com)
:
: - Turn the NV feature management into a deny-list, and expose
: missing features to EL2 guests.
: (20250912212258.407350-1-oliver.upton@linux.dev)
: .
KVM: arm64: nv: Expose up to FEAT_Debugv8p8 to NV-enabled VMs
KVM: arm64: nv: Advertise FEAT_TIDCP1 to NV-enabled VMs
KVM: arm64: nv: Advertise FEAT_SpecSEI to NV-enabled VMs
KVM: arm64: nv: Expose FEAT_TWED to NV-enabled VMs
KVM: arm64: nv: Exclude guest's TWED configuration when TWE isn't set
KVM: arm64: nv: Expose FEAT_AFP to NV-enabled VMs
KVM: arm64: nv: Expose FEAT_ECBHB to NV-enabled VMs
KVM: arm64: nv: Expose FEAT_RASv1p1 via RAS_frac
KVM: arm64: nv: Expose FEAT_DF2 to NV-enabled VMs
KVM: arm64: nv: Don't erroneously claim FEAT_DoubleLock for NV VMs
KVM: arm64: nv: Convert masks to denylists in limit_nv_id_reg()
KVM: arm64: selftests: Test writes to ID_AA64MMFR1_EL1.{HCX, TWED}
KVM: arm64: Make ID_AA64MMFR1_EL1.{HCX, TWED} writable from userspace
KVM: arm64: Convert MDCR_EL2 RES0 handling to compute_reg_res0_bits()
KVM: arm64: Convert SCTLR_EL1 RES0 handling to compute_reg_res0_bits()
KVM: arm64: Enforce absence of FEAT_TCR2 on TCR2_EL2
KVM: arm64: Enforce absence of FEAT_SCTLR2 on SCTLR2_EL{1,2}
KVM: arm64: Convert HCR_EL2 RES0 handling to compute_reg_res0_bits()
KVM: arm64: Enforce absence of FEAT_HCX on HCRX_EL2
KVM: arm64: Enforce absence of FEAT_FGT2 on FGT2 registers
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add a basic test corrupting a level-2 table entry to check that
the resulting abort is a SEA on a PTW at level-3.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
ASoC: Updates for v6.18
A relatively quiet release for ASoC, we've had a lot of maintainance
work going on and several new drivers but really the most remarkable
thing is that we removed a driver, the WL1273 driver used in some old
Nokia systems that have had the underlying system support removed from
the kernel.
- Morimoto-san continues his work on cleanups of the core APIs and
enforcement of abstraction layers.
- Lots of cleanups and conversions of DT bindings.
- Substantial maintainance work on the Intel AVS drivers.
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754.
- Remove support for TI WL1273.
When UBLK_F_BUF_REG_OFF_DAEMON was added, we missed updating kublk's
feat_map, which results in the feature being reported as "unknown." Add
UBLK_F_BUF_REG_OFF_DAEMON to feat_map to fix this.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify the definition of feat_map by introducing a helper macro
FEAT_NAME to avoid having to type the feature name twice. As a side
effect, this changes the names in the feature list to be the full macro
name instead of the abbreviated names that were used before, but this is
a good change for clarity.
Using the full feature macro names ruins the alignment of the output, so
change the output format to put each feature's hex value before its
name, as this is easier to align nicely. The output now looks as
follows:
root# ./kublk features
ublk_drv features: 0x7fff
0x1 : UBLK_F_SUPPORT_ZERO_COPY
0x2 : UBLK_F_URING_CMD_COMP_IN_TASK
0x4 : UBLK_F_NEED_GET_DATA
0x8 : UBLK_F_USER_RECOVERY
0x10 : UBLK_F_USER_RECOVERY_REISSUE
0x20 : UBLK_F_UNPRIVILEGED_DEV
0x40 : UBLK_F_CMD_IOCTL_ENCODE
0x80 : UBLK_F_USER_COPY
0x100 : UBLK_F_ZONED
0x200 : UBLK_F_USER_RECOVERY_FAIL_IO
0x400 : UBLK_F_UPDATE_SIZE
0x800 : UBLK_F_AUTO_BUF_REG
0x1000 : UBLK_F_QUIESCE
0x2000 : UBLK_F_PER_IO_DAEMON
0x4000 : unknown
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- simple propagation of read/write marks;
- joining read/write marks from conditional branches;
- avoid must_write marks in when same instruction accesses different
stack offsets on different execution paths;
- avoid must_write marks in case same instruction accesses stack
and non-stack pointers on different execution paths;
- read/write marks propagation to outer stack frame;
- independent read marks for different callchains ending with the same
function;
- bpf_calls_callback() dependent logic in
liveness.c:bpf_stack_slot_alive().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-12-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds tags __not_msg(<msg>) and __not_msg_unpriv(<msg>).
Test fails if <msg> is found in verifier log.
If __msg_not() is situated between __msg() tags framework matches
__msg() tags first, and then checks that <msg> is not present in a
portion of a log between bracketing __msg() tags.
__msg_not() tags bracketed by a same __msg() group are effectively
unordered.
The idea is borrowed from LLVM's CheckFile with its CHECK-NOT syntax.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-11-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
