The hda-sdw-bpt code links against the soundwire driver, but that fails when
trying to link from built-in code into loadable module:
x86_64-linux-ld: vmlinux.o: in function `intel_ace2x_bpt_close_stream.isra.0':
intel_ace2x.c:(.text+0x137a531): undefined reference to `hda_sdw_bpt_close'
x86_64-linux-ld: vmlinux.o: in function `intel_ace2x_bpt_send_async':
intel_ace2x.c:(.text+0x137aa45): undefined reference to `hda_sdw_bpt_open'
x86_64-linux-ld: intel_ace2x.c:(.text+0x137ab67): undefined reference to `hda_sdw_bpt_close'
x86_64-linux-ld: intel_ace2x.c:(.text+0x137ac30): undefined reference to `hda_sdw_bpt_send_async'
x86_64-linux-ld: vmlinux.o: in function `intel_ace2x_bpt_wait':
intel_ace2x.c:(.text+0x137aced): undefined reference to `hda_sdw_bpt_wait'
Ensure that both SOUNDWIRE_INTEL and SND_SOF_SOF_HDA_SDW_BPT are selected
at the same time by SND_SOC_SOF_INTEL_LNL, and that this happens even if
SND_SOC_SOF_INTEL_SOUNDWIRE is a loadable module but SND_SOC_SOF_INTEL_LNL
is built-in.
This follows the same logic as commit c5a61db9bf ("ASoC: SOF: fix
intel-soundwire link failure").
Fixes: 5d5cb86fb4 ("ASoC: SOF: Intel: hda-sdw-bpt: add helpers for SoundWire BPT DMA")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250805160451.4004602-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Venkata Prasad Potturu <venkataprasad.potturu@amd.com>:
This patch series is to add legacy and sof audio support
for acp7.2 platform.
Add DMI quirk entry for Alienware systems with SKU "0CCC" to enable
proper speaker codec configuration (SOC_SDW_CODEC_SPKR).
This system requires the same audio configuration as some existing Dell systems.
Without this patch, the laptop's speakers and microphone will not work.
Signed-off-by: Peter Jakubek <peterjakubek@gmail.com>
Link: https://patch.msgid.link/20250731172104.2009007-1-peterjakubek@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace GFP_ATOMIC with GFP_KERNEL for dma_alloc_coherent() calls. This
change improves memory allocation reliability during firmware loading,
particularly during system resume when memory pressure is high. Because
of using GFP_KERNEL, reclaim can happen which can reduce the probability
of failure.
Fixes memory allocation failures observed during system resume with
fragmented memory conditions.
snd_sof_amd_vangogh 0000:04:00.5: error: failed to load DSP firmware after resume -12
Fixes: 145d7e5ae8 ("ASoC: SOF: amd: add option to use sram for data bin loading")
Fixes: 7e51a9e38a ("ASoC: SOF: amd: Add fw loader and renoir dsp ops to load firmware")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://patch.msgid.link/20250725190254.1081184-1-usama.anjum@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
There is two different cases for getting channel status data:
1. With PHY exists, there is firmware running on M core, the firmware
should fill the channel status to RAM space, driver need to read them
from RAM.
2. Without PHY, the channel status need to be obtained from registers.
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
A small chain with some patches that seem to have got lost in the
process. One small additional bug fix for the regmap callbacks, and one
small feature addition for the control parsing.
Charles Keepax (2):
ASoC: SDCA: Fix some holes in the regmap readable/writeable helpers
ASoC: SDCA: Add support for -cn- value properties
include/sound/sdca_function.h | 14 ++---
sound/soc/sdca/sdca_functions.c | 99 +++++++++++++++++++++------------
sound/soc/sdca/sdca_regmap.c | 29 ++++++++--
3 files changed, 92 insertions(+), 50 deletions(-)
--
2.39.5
For the XCVR module on i.MX95, even though it only supports SPDIF, the
channel status needs to be obtained from RAM space, which is processed
by firmware. Firmware is necessary to trigger the FSL_XCVR_IRQ_NEW_CS
interrupt.
This change also applies for the SPDIF & ARC function on i.MX8MP which
has the firmware.
Fixes: e6a9750a34 ("ASoC: fsl_xcvr: Add suspend and resume support")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250710030405.3370671-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
First, a couple of minor code fixups to already submitted code. Then
some patches to add new DAI ops helpers for the SDCA stuff, these allow
configuring things like the sample rate and finding out which SoundWire
port should be used for a specific SDCA streaming input/output terminal.
Still a few bits of outstanding work here (propogation of Cluster
information particularly) but his should be good enough to get some
basic use-cases working.
Hopefully we are getting fairly close to completing a first version of
the SDCA work now. Should be one more series to add FDL (firmware
downloading), then we should be able to send a first version of the
actual SDCA class driver itself.
Device variants use different amount of clock inputs, but all of them
are in the same order, 'clock-names' in top-level properties can define
the list and each if:then: block can only narrow the number of items.
This is preferred syntax, because it keeps list unified among devices
and encourages adding new entries to the end of the list, instead of
adding them in the middle. The change has no functional impact, but
partially reverts approach implemented in commit cfad817095 ("ASoC:
dt-bindings: qcom,lpass-va-macro: Add missing NPL clock").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250716074957.102402-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Some small SDCA bug fixes reported from various sources. An array bounds
check, an uninitialised variable and some memory allocations that should
zero initialise.
Charles Keepax (3):
ASoC: SDCA: Fix off by one error in IRQ bound check
ASoC: SDCA: Avoid use of uninitialised local name variable
ASoC: SDCA: Update memory allocations to zero initialise
sound/soc/sdca/sdca_asoc.c | 12 ++++++------
sound/soc/sdca/sdca_interrupts.c | 5 ++---
2 files changed, 8 insertions(+), 9 deletions(-)
--
2.39.5
Merge series from Brian Masney <bmasney@redhat.com>:
The round_rate() clk ops is deprecated in the clk framework in favor
of the determine_rate() clk ops, so let's go ahead and convert the
drivers in the rtc subsystem using the Coccinelle semantic patch
posted below. I did a few minor cosmetic cleanups of the code in a
few cases.
Coccinelle semantic patch:
virtual patch
// Look up the current name of the round_rate function
@ has_round_rate @
identifier round_rate_name =~ ".*_round_rate";
identifier hw_param, rate_param, parent_rate_param;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
...
}
// Rename the route_rate function name to determine_rate()
@ script:python generate_name depends on has_round_rate @
round_rate_name << has_round_rate.round_rate_name;
new_name;
@@
coccinelle.new_name = round_rate_name.replace("_round_rate", "_determine_rate")
// Change rate to req->rate; also change occurrences of 'return XXX'.
@ chg_rate depends on generate_name @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
identifier ERR =~ "E.*";
expression E;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
<...
(
-return -ERR;
+return -ERR;
|
- return rate_param;
+ return 0;
|
- return E;
+ req->rate = E;
+
+ return 0;
|
- rate_param
+ req->rate
)
...>
}
// Coccinelle only transforms the first occurrence of the rate parameter
// Run a second time. FIXME: Is there a better way to do this?
@ chg_rate2 depends on generate_name @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
<...
- rate_param
+ req->rate
...>
}
// Change parent_rate to req->best_parent_rate
@ chg_parent_rate depends on generate_name @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
<...
(
- *parent_rate_param
+ req->best_parent_rate
|
- parent_rate_param
+ &req->best_parent_rate
)
...>
}
// Convert the function definition from round_rate() to determine_rate()
@ func_definition depends on chg_rate @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
identifier generate_name.new_name;
@@
- long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
- unsigned long *parent_rate_param)
+ int new_name(struct clk_hw *hw, struct clk_rate_request *req)
{
...
}
// Update the ops from round_rate() to determine_rate()
@ ops depends on func_definition @
identifier has_round_rate.round_rate_name;
identifier generate_name.new_name;
@@
{
...,
- .round_rate = round_rate_name,
+ .determine_rate = new_name,
...,
}
Note that I used coccinelle 1.2 instead of 1.3 since the newer version
adds unnecessary braces as described in this post.
https://lore.kernel.org/cocci/67642477-5f3e-4b2a-914d-579a54f48cbd@intel.com/
Currently the core SDCA code simply creates a place holder available
channels from 1 to SDCA_MAX_CHANNEL_COUNT. Add a helper function
that will constrain the number of channels based on the actual
available SDCA Clusters in DisCo. Currently this code only handles
Input Terminal Entities as they directly specify the Cluster. More
work will be required later for Output Terminals which inherit their
Cluster. Typically this new helper would be called from the DAIs
startup callback.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250707124155.2596744-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peng Fan <peng.fan@nxp.com>:
This patchset is a pick up of patch 1,2 from [1]. And I also collect
Linus's R-b for patch 2. After this patchset, there is only one user of
of_gpio.h left in sound driver(pxa2xx-ac97).
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
Patch 1 is to drop legacy platform data which in-tree no users are using it
Patch 2 is to convert to GPIO descriptors
Checking the DTS that use the device, all are using GPIOD_ACTIVE_LOW
polarity for reset-gpios, so all should work as expected with this patch.
[1] https://lore.kernel.org/all/20250408-asoc-gpio-v1-0-c0db9d3fd6e9@nxp.com/
