i.MX arm64 device tree for 6.8:
- New board support: MBa93xxCA starter kit, LX2160A based MBLX2160A,
Dimonoff Gateway EVK, Verdin i.MX8M based Mallow, and SKOV i.MX8MP revB.
- A set of changes from Adam Ford to enable MIPI_DSI, overdrive mode and
NPU support for Beacon i.MX8M boards.
- A number of changes from Alexander Stein to add CCM interrupts for
CCM, 'chassis-type' property, and enable VPU and LVDS display for
TQ-Systems boards.
- i.MX93 update for AUDIO, I3C, ANATOP and uSDHC.
- A couple of changes from David Heidelberg to correct dt-schema check
errors for 'fsl,tmu-calibration' and 'gpio-fan,speed-map'.
- A bunch of nice dt-schema check fix-ups from Fabio Estevam.
- A couple of debix-som update from Kieran Bingham adding heartbeat LED
and CSI power regulators.
- White-space cleanup from Krzysztof Kozlowski.
- Add display support for imx8mn-bsh-smm-s2/pro board.
- A series from Tim Harvey to add TPM support for i.MX8M Venice devices.
* tag 'imx-dt64-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (69 commits)
arm64: dts: freescale: fix the schema check errors for fsl,tmu-calibration
arm64: dts: freescale: imx8qxp: Disable dsp reserved memory by default
arm64: dts: imx8qxp: Add VPU subsystem file
arm64: dts: imx8qxp-mek: Move port under USB connector
arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup
arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector
arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: Fix USB connector description
arm64: dts: imx8mp-venice: Fix USB connector description
arm64: dts: imx8mp-verdin: Fix USB connector description
arm64: dts: imx8dxl-ss-conn: Move clk_dummy out of USB node
arm64: dts: imx8mn-evk: Move port under USB connector
arm64: dts: imx8mm-evk: Move port under USB connector
arm64: dts: freescale: introduce dimonoff-gateway-evk board
arm64: dts: imx8m*-tqma8m*: Add chassis-type
arm64: dts: imx8mn-beacon: Support overdrive mode
arm64: dts: imx8mn: Enable Overdrive mode
arm64: dts: imx8mm-beacon: Enable overdrive mode
arm64: dts: imx8mm: Add optional overdrive DTSI
arm64: dts: imx8mm: Reduce GPU to nominal speed
...
Link: https://lore.kernel.org/r/20231216064605.876196-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX ARM device tree for 6.8:
- A bunch of changes from Fabio Estevam cleaning up dt-schema warnings.
- A number of i.MX7 related small fixes and peripheral addition from
Alexander Stein.
- A set of changes from Hiago De Franco adding usdhc aliases for Apalis
and Colibri boards.
- A white-space cleanup from Krzysztof Kozlowski.
- A change from Linus Walleij to correct errors in the Marvell MV88E6xxx
switch descriptions.
- Fix a couple of typo in comment for MBA6 and MBA6ULX board.
- Add on-chip memory and enable MIPI-DSI support for i.MX7.
- Add LM75A sensor for TQMA7 board.
* tag 'imx-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (41 commits)
ARM: dts: imx27-phytec-phycore-som: Use 'rtc' as node name
ARM: dts: imx25: Remove unneeded keypad properties
ARM: dts: imx23/28: Fix the DMA controller node name
ARM: dts: imx23-sansa: Use preferred i2c-gpios properties
ARM: dts: imx27-apf27dev: Fix LED name
ARM: dts: imx25/27: Pass timing0
ARM: dts: imx25: Fix the iim compatible string
ARM: dts: imx25: Move usbphy nodes out of simple-bus
ARM: dts: imx1: Use 'bus' for AIPI bus
ARM: dts: imx27-phytec-phycore-rdk: Move usbphy nodes out of simple-bus
ARM: dts: imx27-pdk: Move usbphy0 out of simple-bus
ARM: dts: imx27: Use 'bus' for EMI bus
ARM: dts: imx27: Use 'bus' for AIPI bus
ARM: dts: imx27-phytec-phycore-som: Use the mux- prefix
ARM: dts: imx1: Fix sram node
ARM: dts: imx27: Fix sram node
ARM: dts: imx: Use flash@0,0 pattern
ARM: dts: imx25/27-eukrea: Fix RTC node name
ARM: dts: imx25-pdk: Pass #sound-dai-cells
ARM: dts: imx25: Pass I2C clock-names property
...
Link: https://lore.kernel.org/r/20231216064605.876196-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
More Ux500 device tree updates for v6.8
The HREF520 reference design had the wrong analog baseband
defined causing a boot regression.
Was AB8500, but this board has AB8505.
Rearrange the device trees to make it possible to define
a different AB and slot it in.
* tag 'ux500-dts-soc-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: ux500-href: Switch HREF520 to AB8505
ARM: dts: ux500-href: Push AB8500 config out
ARM: dts: ux500-href: Push AB8500 inclusion to the top
Link: https://lore.kernel.org/r/CACRpkdZ9wCV7oohF2KX6MFwmuSPR_i7et8O5SH=op6gyQ4mOvQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32 DT for v6.8, round 1
Highlights:
----------
- MCU:
- Add SPI support on STM32F746.
- Better describe vcc_3v3 for SD and DSI on stm32f469-disco.
- MPU:
- STM32MP13:
- Add DCMIPP (Digital Camera Memory Interface Piwel Processor) on STM32MP135.
- STMP32MP15:
- Change "phys" affectation from board to Soc dtsi file for USB host as it is hard linked
to the port 0 of usbphyc.
- Fix SCMI and No-SCMI compatible in boards.
- STM32MP25:
- Add BSEC support to read the device part number OTP and the package data register OTP.
* tag 'stm32-dt-for-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: add dcmipp support to stm32mp135
arm64: dts: st: add bsec support to stm32mp25
ARM: dts: stm32: Consolidate usbh_[eo]hci phy properties on stm32mp15
ARM: dts: stm32: don't mix SCMI and non-SCMI board compatibles
dt-bindings: arm: stm32: don't mix SCMI and non-SCMI board compatibles
ARM: dts: stm32: minor whitespace cleanup around '='
ARM: dts: stm32: add SPI support on STM32F746
ARM: dts: stm32: add STM32F746 syscfg clock
ARM: dts: stm32: use the same 3v3 for SD and DSI nodes on stm32f469-disco
Link: https://lore.kernel.org/r/9363227b-1c44-4a20-b245-efbbbf9ab1dd@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- new boards: Orange Pi Zero 2W, Transpeed 8K618-T
* tag 'sunxi-dt-for-6.8-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h618: add Transpeed 8K618-T TV box
dt-bindings: arm: sunxi: document Transpeed 8K618-T board name
dt-bindings: vendor-prefixes: add Transpeed
arm64: dts: allwinner: h616: add Orange Pi Zero 2W support
dt-bindings: arm: sunxi: add Orange Pi Zero 2W
Link: https://lore.kernel.org/r/ZXtWFk-Bne835txP@archlinux
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Microchip AT91 device tree updates for v6.8
It contains:
- IRQ support for Ethernet PHYs on SAM9X60-EK and SAM9X60-Curiosity
boards
- removal of the mmc-ddr-3_3v property from SD controllers connected to SD
slots, for SAMA5D27-WLSOM1-EK and SAMA5D27-SOM1-EK boards, as this
property is for eMMC devices
* tag 'at91-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama5d27_som1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node
ARM: dts: microchip: sama5d27_wlsom1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node
ARM: dts: microchip: sam9x60ek: Add IRQ support for ethernet PHY
ARM: dts: microchip: sam9x60_curiosity: Add IRQ support for ethernet PHY
Link: https://lore.kernel.org/r/20231214174954.3045355-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm Vexpress/Juno update for v6.8
Just a single update to align the thermal zone names with bindings matching
[alphanumericals]*-thermal pattern.
* tag 'juno-update-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Align thermal zone names with bindings
Link: https://lore.kernel.org/r/20231213115826.3577764-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards are the Geniatech XPI-3128 (RK3128), Sonoff iHost (rv1109)
One "new" soc is the rv1109 which is a two-core variant of the rv1126
and everything else is identical.
Lots of love for the old rk3128 (power-domains, gpu, gmac, usb) and
rv1126 (uart pins, i2c2 special case) and rework of aliases to have
core busses that are hard-numbered in boards and documentation centrally
in the dtsi, but the per board aliases in the boards (ethernet).
Plus the rk3036 got a yaml hdmi binding which required some small fixes.
* tag 'v6.8-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (24 commits)
ARM: dts: rockchip: add hdmi-connector node to rk3036-kylin
ARM: dts: rockchip: fix rk3036 hdmi ports node
ARM: dts: rockchip: add gpio alias for gpio dt nodes
ARM: dts: rockchip: Move uart aliases to SoC dtsi for RK3128
ARM: dts: rockchip: Move i2c aliases to SoC dtsi for RK3128
ARM: dts: rockchip: Move gpio aliases to SoC dtsi for RK3128
ARM: dts: rockchip: Add Sonoff iHost Smart Home Hub
dt-bindings: arm: rockchip: Add Sonoff iHost
ARM: dts: rockchip: Add rv1109 SoC
ARM: dts: rockchip: Split up rgmii1 pinctrl on rv1126
ARM: dts: rockchip: Add i2c2 node to rv1126
ARM: dts: rockchip: Serial aliases for rv1126
ARM: dts: rockchip: Add alternate UART pins to rv1126
ARM: dts: rockchip: Enable GPU for XPI-3128
ARM: dts: rockchip: Add GPU node for RK3128
ARM: dts: rockchip: Add power-controller for RK3128
ARM: dts: rockchip: Enable gmac for XPI-3128
ARM: dts: rockchip: Add gmac node for RK3128
ARM: dts: rockchip: Make usbphy the parent of SCLK_USB480M for RK3128
ARM: dts: rockchip: Add dwc2 otg fifo siztes for RK3128
...
Link: https://lore.kernel.org/r/3197878.5fSG56mABF@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards are the Anberic RG351V handheld (rk3326), Theobroma Systems Jaguar
SBC (rk3588), Powkiddy X55 and RK2023 handheld (rk3566), Edgeble-Neu6b (rk3588)
The rk3588 got attention with one working usb3 host on Rock-5a/5b, Orangepi-5
and audio for the EVB1.
Some smaller improvements for the other socs (fifo-depths on rk3328,
gpio-line-names on rk3308-rock-pi-s, gpu power-coefficients on rk3399,
and a fix for the newly converted gpio-fan yaml binding).
Also a number of aliases were moved. Always-numbered core busses can have their
aliases in the soc dtsi, as is done in a number of cases already and other alises
like ethernet really should be per board.
* tag 'v6.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (31 commits)
arm64: dts: rockchip: Add Anbernic RG351V
arm64: dts: rockchip: Split RG351M from Odroid Go Advance
dt-bindings: arm: rockchip: Add Anbernic RG351V
arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3588(S) boards
arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3566 boards
arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for PX30
arm64: dts: rockchip: Remove ethernetX aliases from the SoC dtsi for RK3328
arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3368
arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3399
arm64: dts: rockchip: make dts use gpio-fan matrix instead of array
arm64: dts: rockchip: add gpio alias for gpio dt nodes
arm64: dts: rockchip: Add dynamic-power-coefficient to rk3399 GPU
arm64: dts: rockchip: add rk3588 spi aliases to soc dtsi
arm64: dts: rockchip: add rk3588 gpio aliases to soc dtsi
arm64: dts: rockchip: add rk3588 i2c aliases to soc dtsi
arm64: dts: rockchip: move rk3588 serial aliases to soc dtsi
arm64: dts: rockchip: add Theobroma Jaguar SBC
dt-bindings: arm: rockchip: Add Theobroma-Systems Jaguar SBC
arm64: dts: rockchip: Add Powkiddy X55
dt-bindings: arm: rockchip: Add Powkiddy X55
...
Link: https://lore.kernel.org/r/3535836.iIbC2pHGDl@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v6.8
1. Exynos4212 and Exynos4412: Final fixes for dtbs_check warnings.
Replace duplicate PMU node in FIMC IS node with syscon phandle. The
old solution of duplicated PMU node was not a correct representation of
the hardware and could have concurrent access issues.
The DTS change depends on media FIMC IS drivers changes already
merged in previous cycle, thus it is not fully
backwards-compatible. It is a necessary trade-off in fixing wrong
description in DTS.
With this fix, `make dtbs_check` status looks like:
S3C6410: no warnings
Exynos: no warnings, one undocumented compatible
S5PV210: one warning, one undocumented compatible
2. Exynos4210, Exynos4212, Exynos4412, S5PV210:
Correct FIMC IS camera ranges and IO addresses to silence dtc W=1
warnings. No functional impact expected.
After this fix, there are no dtc W=1 warnings on all ARMv7 platforms.
3. Galaxy I9100: Fix 12-second hang during boot by enabling regulator
(real cause not really known), add touch keys and accelerometer.
* tag 'samsung-dt-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: exynos4210-i9100: Add accelerometer node
ARM: dts: samsung: exynos4210-i9100: Add node for touch keys
ARM: dts: samsung: exynos4210-i9100: Unconditionally enable LDO12
ARM: dts: samsung: s5pv210: fix camera unit addresses/ranges
ARM: dts: samsung: exynos4: fix camera unit addresses/ranges
ARM: dts: samsung: exynos4x12: replace duplicate pmu node with phandle
Link: https://lore.kernel.org/r/20231212093105.13938-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM64 changes for v6.8
Two (and a half) major items are coming with this pull request:
1. Add specific compatibles to all Samsung Exynos and Tesla FSD blocks,
because that's what guidelines expect [1] and is generally
recommended practice. Existing compatibles are left untouched, thus
no driver changes are needed. The work only cleans things up, so any
future contributions will use recommended style: specific and
fallback compatibles.
Since no driver changes are needed in this work and the DTS is
directly affected by bindings change (running tests with `make
dtbs_check`), this pull includes all bindings changes, even though
usual practice is that bindings come via driver subsystem. Keeping
everything here makes review and testing easier. Also will allow us
to avoid conflicts related to new platforms (see below).
2. Add ExynosAutov920 SoC and SADK board (Samsung Automotive Development
Kit) with minimal support so far: serial console, GPIO-based keys and
PWM fan.
3. Add few bindings for upcoming Google GS101 SoC. This pull request
does not include its DTS yet, just few reviewed dependencies. DTS
will be coming soon.
[1] Documentation/devicetree/bindings/writing-bindings.rst
* tag 'samsung-dt64-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (38 commits)
arm64: dts: exynos: add minimal support for exynosautov920 sadk board
arm64: dts: exynos: add initial support for exynosautov920 SoC
dt-bindings: samsung: exynos-sysreg: combine exynosautov920 with other enum
dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
dt-bindings: clock: Add Google gs101 clock management unit bindings
dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
arm64: dts: fsd: add specific compatibles for Tesla FSD
dt-bindings: watchdog: samsung: add specific compatible for Tesla FSD
dt-bindings: samsung: exynos-pmu: add specific compatible for Tesla FSD
dt-bindings: serial: samsung: add specific compatible for Tesla FSD
dt-bindings: pwm: samsung: add specific compatible for Tesla FSD
dt-bindings: i2c: exynos5: add specific compatible for Tesla FSD
arm64: dts: exynosautov9: use Exynos7 fallbacks for pin wake-up controller
arm64: dts: exynos850: use Exynos7 fallbacks for pin wake-up controllers
dt-bindings: hwinfo: samsung,exynos-chipid: add exynosautov920 compatible
dt-bindings: arm: samsung: Document exynosautov920 SADK board binding
dt-bindings: pwm: samsung: add exynosautov920 compatible
dt-bindings: serial: samsung: add exynosautov920-uart compatible
dt-bindings: samsung: usi: add exynosautov920-usi compatible
dt-bindings: samsung: exynos-pmu: add exynosautov920 compatible
...
Link: https://lore.kernel.org/r/20231212093105.13938-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree changes for omaps
- A series of patches to reorganize Motorola Mapphone related files to add
support for tablets as the peripherals are different compared to the
phones
- Apply am57xx-idk overlays to base dtbs
- Extcon update to use id-gpios and vbus-gpios
- Update omap4-epson-embt2ws to enable wlan clock and bluetooth-gnss
- Update for logicpd-torpedo to use bluetooth-gnss node name
* tag 'omap-for-v6.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-embt2ws: Add Bluetooth
ARM: dts: omap: logicpd-torpedo: do not disguise GNSS device
ARM: dts: omap4-embt2ws: enable 32K clock on WLAN
ARM: dts: ti/omap: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
arm: dts: omap: Apply am57xx-idk overlays to base dtbs
ARM: dts: motorola-mapphone: Add basic support for mz609 and mz617
ARM: dts: motorola-mapphone: Move handset devices to a common file
ARM: dts: motorola-mapphone: Move LCD to common file for xt875 and xt894
dt-bindings: omap: Add Motorola mapphone mz609 and mz617 tablets
Link: https://lore.kernel.org/r/pull-1702037869-295608@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
fsl,tmu-calibration contains cell pairs (u32-matrix). Mark them as such.
Use matching property syntax and allow correct validation.
No functional changes.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Node names should be generic.
Use 'rtc' for the rtc node to fix the following dt-schema warning:
imx27-phytec-phycore-rdk.dtb: pcf8563@51: $nodename:0: 'pcf8563@51' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$'
from schema $id: http://devicetree.org/schemas/rtc/nxp,pcf8563.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per imx-keypad.yaml, '#address-cells', '#size-cells', 'clock-names'
are not valid properties.
Remove them to fix the following dt-schema warning:
imx25-pdk.dtb: kpp@43fa8000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'clock-names' were unexpected)
from schema $id: http://devicetree.org/schemas/input/imx-keypad.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Even if the 'dsp' node is disabled the memory intended to be used by the
DSP is reserved. This limits the memory range suitable for CMA allocation.
Thus disable the dsp_reserved node. DSP users need to enable it in parallel
to the 'dsp' node.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx8qxp re-uses imx8qm VPU subsystem file, but it has different base
addresses. Also imx8qxp has only two VPU cores, delete vpu_vore2 and
mu2_m0 accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is a Chinese TV box, probably very similar if not identical to
various other cheap TV boxes with the same specs:
- Allwinner H618 SoC (4 * Arm Cortex-A53 cores, 1MB L2 cache)
- 2 or 4GiB DDR3L DRAM
- 32, 64, or 128 GiB eMMC flash
- AXP313a PMIC
- 100 Mbit/s Ethernet (using yet unsupported internal PHY)
- HDMI port
- 2 * USB 2.0 ports
- microSD card slot
- 3.5mm A/V port
- 7-segment display
- 5V barrel plug power supply
The PCB provides holes for soldering a UART header or cable, this is
connected to the debug UART0. UART1 is used for the Bluetooth chip,
although this isn't working yet.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20231214015312.17363-4-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Add BSEC support to STM32MP25 SoC family with SoC information:
- RPN = Device part number (BSEC_OTP_DATA9)
- PKG = package data register (Bits 2:0 of BSEC_OTP_DATA122)
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
All machines making use of &usbh_ehci and/or &usbh_ohci use
phys = <&usbphyc_port0>;
So move this setting into the .dtsi. Also add
phy-names = "usb";
which isn't used by all machines, but nice for consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The binding erroneously decreed that the SCMI variants of the ST
evaluation kits are compatible with the non-SCMI variants.
This is not correct, as a kernel or bootloader compatible with the non-SCMI
variant is not necessarily able to function, when direct access
to resources is replaced by having to talk SCMI to the secure monitor.
The binding has been adjusted to reflect thus, so synchronize the device
trees now.
Fixes: 5b7e58313a ("ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
SCMI-enabled boards may restrict access to resources like clocks, resets
and regulators to the secure world.
A normal world bootloader or kernel compatible with the non-SCMI-enabled
board is thus not guaranteed to be able to deal with the SCMI variant.
It follows, that the SCMI-enabled board is not compatible with the
non-SCMI enabled board, so drop that compatible.
This change is motivated by the barebox' bootloader's use of bootloader
specification files[1][2]: barebox for non-SCMI DK2 will compare its
own top-level "stm32mp157c-dk2" compatible with all compatibles
listed in the device tree referenced by each bootloader spec file.
If the boot medium contains a configuration with
compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157";
it will match, because of the second compatible and boot a kernel with
SCMI enabled, although no SCMI may exist on the platform.
[1]: https://uapi-group.org/specifications/specs/boot_loader_specification/
[2]: https://www.barebox.org/doc/latest/user/booting-linux.html#boot-loader-specification
Fixes: 8e14ebb1f0 ("dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Describe the PTN5150 USB-C connector to improve the devicetree description
and fix the following dt-schema warning:
imx8mp-dhcom-pdk3.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Describe the PTN5150 USB-C connector to improve the devicetree description
and fix the following dt-schema warning:
imx8mn-var-som-symphony.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The USB connector should not be placed under the dwc3 node.
Move the USB connector out of the SoC level and use port to describe
the connection to the dwc3 controller.
This fixes the following dt-schema warning:
imx8mp-tqma8mpql-mba8mpxl.dtb: usb@38100000: Unevaluated properties are not allowed ('connector' was unexpected)
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The USB connector should not be placed under the dwc3 node.
Move the USB connector out of the SoC level and use port to describe
the connection to the dwc3 controller.
This fixes the following dt-schema warning:
imx8mp-venice-gw72xx-2x.dtb: usb@38100000: Unevaluated properties are not allowed ('connector' was unexpected)
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The USB connector should not be placed under the dwc3 node.
Move the USB connector out of the SoC level and use port to describe
the connection to the dwc3 controller.
This fixes the following dt-schema warning:
imx8mp-verdin-wifi-mallow.dtb: usb@32f10100: usb@38100000: Unevaluated properties are not allowed ('connector' was unexpected)
from schema $id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The clk_dummy is not part of the usbotg2 block, so move it
to the root node to fix the following dt-schema warning:
imx8dxl-evk.dtb: usb@5b0e0000: Unevaluated properties are not allowed ('clock-dummy' was unexpected)
from schema $id: http://devicetree.org/schemas/usb/ci-hdrc-usb2.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per nxp,ptn5110.yaml, 'port' should be placed under 'connector'.
Do as requested to fix the following dt-schema warning:
imx8mn-evk.dtb: tcpc@50: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per nxp,ptn5110.yaml, 'port' should be placed under 'connector'.
Do as requested to fix the following dt-schema warning:
imx8mm-evkb.dtb: tcpc@50: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Dimonoff gateway EVK board is based on a Variscite
VAR-SOM-NANO, with a NXP MX8MN nano CPU and also based on a Symphony
mx8mn EVK.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Device tree specification 0.4 defines an optional, but recommended
'chassis-type' property. Add it to TQMa8M* based board files.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SoC is configured to operate in overdrive mode, so it
is safe to include imx8mn-overdrive to run the GPU faster.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8M Nano supports and overdrive mode if the SoC is given
the proper voltage. Add imx8mn-overdrive.dtsi file which can
be included by boards who support the voltage necessary to handle
the faster clocks. This increases the GPU clocks from 400MHz to
600MHz.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
