Samsung DTS ARM changes for v6.3, part two
Several cleanups pointed out by `make dtbs_check`:
1. Align LED status node name with bindings.
2. Drop redundant properties.
3. Move i2c-gpio node out of soc to top-level, as soc node is expected
to have only MMIO nodes.
4. Correct SPI NOR flash compatible in SMDK5250 and SMDKv310.
5. Align GPIO property names in WM1811-family codec nodes with bindings.
6. Correct MAX98090 codec DAI cells in Snow.
* tag 'samsung-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: correct max98090 DAI argument in Snow
ARM: dts: s5pv210: add "gpios" suffix to wlf,ldo1ena on Aries
ARM: dts: exynos: add "gpios" suffix to wlf,ldo1ena on Arndale
ARM: dts: exynos: add "gpios" suffix to wlf,ldo1ena on Midas
ARM: dts: exynos: correct SPI nor compatible in SMDK5250
ARM: dts: exynos: correct SPI nor compatible in SMDKv310
ARM: dts: exynos: move I2C10 out of soc node on Arndale
ARM: dts: exynos: drop redundant address/size cells from I2C10 on Arndale
ARM: dts: exynos: drop default status from I2C10 on Arndale
ARM: dts: exynos: align status led name with bindings on Origen4210
Link: https://lore.kernel.org/r/20230211113103.58894-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AT91 device tree updates for 6.3 #2
It contains:
- cleanups arround flexcom nodes on SAM9X60 SoC as follows:
- preserve same ID for flexcoms and the embedded nodes (e.g. flx4
will embed uart4, spi4, i2c4 but not e.g. uart1, spi2, i2c3);
- SoC specific bindings were moved from board specific file to SoC
specific file
- DMA bindings for all flexcom nodes were added
- SoC file was filled with missing flexcom nodes
- new SAM9X60 Curiosity board that contains 1 uSDcard interface, 1 SDcard
interface, 1 USB device interface, 2 USB Type-A interfaces, 2 CAN
interfaces, 1 10/100 Ethernet interface, 1 LCD RGB666 interface,
1 Gb DDR2, 4 Gb NAND Flash, 2Kb EEPROM, leds, button, power
regulators, UART and JTAG connectors
* tag 'at91-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board
dt-bindings: arm: at91: Add info on sam9x60 curiosity
ARM: dts: at91: sam9x60: Add missing flexcom definitions
ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes
ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART
ARM: dts: at91: sam9x60: fix spi4 node
ARM: dts: at91: sam9x60: move flexcom definitions
ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions
Link: https://lore.kernel.org/r/20230209084930.289721-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add dma bindings for flexcom nodes in the soc dtsi file. Users those who
don't wish to use the DMA function for their flexcom functions can
overwrite the dma bindings in the board device tree file.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
[durai.manickamkr@microchip.com: fixed code indentation and updated commit log]
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230207110651.197268-6-durai.manickamkr@microchip.com
Move the flexcom definitions from board specific DTS file
to the SoC specific DTSI file for sam9x60ek.
[durai.manickamkr@microchip.com: Logical split-up of this patch and added
missing UART5 compatibles]
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@microchip.com>
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230207110651.197268-3-durai.manickamkr@microchip.com
SoCFPGA dts updates for v6.3
- Align UART node with bindings
- Add pinctrl properties for Stratix10/Agilex
- Change address-cells to 2 to support 64-bit address for fpga region
* tag 'socfpga_dts_updates_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: socfpga: change address-cells to support 64-bit addressing
arm64: dts: stratix10: add i2c pins for pinctrl
arm64: dts: add pinctrl-single property for Stratix10/Agilex
ARM: dts: socfpga: align UART node name with bindings
Link: https://lore.kernel.org/r/20230206162425.311593-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
TI K3 device tree updates for v6.3
New features:
J784S4 SoC and EVM support
AM68 and AM69 StarterKit, phyBOARD-Electra-AM642, Siemens IoT2050 M.2
AM62A7 SK additional peripherals
AM62 SK USB support
Non critical fixes
AM62:
McSPI Clock ID fixes
MMC TAP value updates
J7200:
pinmux range update
All:
Cache DT node fixes
Cleanups:
Reorder dts Makefile entries alphabetically
* tag 'ti-k3-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (25 commits)
arm64: dts: ti: Makefile: Rearrange entries alphabetically
arch: arm64: dts: Add support for AM69 Starter Kit
dt-bindings: arm: ti: Add binding for AM69 Starter Kit
arm64: dts: ti: iot2050: Add support for M.2 variant
dt-bindings: arm: ti: Add binding for Siemens IOT2050 M.2 variant
arm64: dts: ti: iot2050: Add layout of OSPI flash
arm64: dts: ti: k3-j7200: Fix wakeup pinmux range
arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board
arm64: dts: ti: Add initial support for AM68 SK System on Module
dt-bindings: arm: ti: Add binding for AM68 SK
arm64: dts: Update cache properties for ti
arm64: dts: ti: Add support for phyBOARD-Electra-AM642
dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware
arm64: dts: ti: k3-am62a7-sk: Enable USB1 node
arm64: dts: ti: k3-am62a7-sk: Enable ethernet port
arm64: dts: ti: k3-am62a-main: Add more peripheral nodes
arm64: dts: ti: k3-am62a-mcu: Add MCU domain peripherals
arm64: dts: ti: Add support for J784S4 EVM board
arm64: dts: ti: Add initial support for J784S4 SoC
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J784s4
...
Link: https://lore.kernel.org/r/642cf238-43e5-d6fa-68b5-a9dfbc0277bf@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mvebu dt64 for 6.3 (part 1)
Do not use anymore "marvell,armada3710" compatible string for the
Armada 3720 boards.
* tag 'mvebu-dt64-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: Fix compatible strings for Armada 3720 boards
Link: https://lore.kernel.org/r/87zg9w9j6l.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mvebu dt for 6.3 (part 1)
Fix errors reported by dtbs_check on dove boards
* tag 'mvebu-dt-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: dove.dtsi: Move ethphy to fix schema error
Link: https://lore.kernel.org/r/87357oaxs0.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New SoC supported is the rk3588.
New boards rk3588-evb1, EmbedFire Lubancat 1+2 (based on different SoCs),
a number of Radxa boards (rock-5a and -5b, compute module 3, cm3i e25),
OrangePi R1 plus and the Edgeble Neu6 SoM and baseboard.
A number of improvements for the Odroid Go (and its clones) including
touchscreen and display support, led and audio changes.
As well as some improvements for the rk356x, better gpu thermal values for
px30 and some minor improvement for rock3a, rock5a, rk3566-demo,
roc-rk3399-pc and bi-r2pro.
* tag 'v6.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits)
arm64: dts: rockchip: Correct the model name for Radxa E25
arm64: dts: rockchip: Drop unneeded model for Radxa CM3i
arm64: dts: rockchip: Add missing CM3i fallback compatible for Radxa E25
arm64: dts: rockchip: Fix compatible for Radxa CM3
arm64: dts: rockchip: rk3566: Enable WiFi, BT support for Radxa CM3
arm64: dts: rockchip: Enable Ethernet for Radxa CM3 IO
arm64: dts: rockchip: add display to RG503
arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to rk356x
arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SBC boards
arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SoM boards
arm64: dts: rockchip: Add Radxa Compute Module 3 IO board
arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3
dt-bindings: arm: rockchip: Add Radxa Compute Module 3
arm64: dts: rockchip: Fix RX delay for ethernet phy on rk3588s-rock5a
arm64: dts: rockchip: add Hynitron cst340 for Anbernic 353 series
arm64: dts: rockchip: Enable wifi module AP6398s for rk3566 box demo
arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO
arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A SoM
arm64: dts: rockchip: fix hdmi cec on rock-3a
arm64: dts: rockchip: assign rate to clk_rtc_32k on rk356x
...
Link: https://lore.kernel.org/r/6491956.DvuYhMxLoT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mt7986:
- add USB host support
- add support for mmc, pcie
- add support for Bananpi R3
mt8173:
- switch to SMC watchdog for Acer Chromebook R13
- move panel under aux bus
mt8183:
- support detachable keyboards on kukui based Chromebooks
- describe 13 MHz clock correctly
- complete CPU cache information
mt8186:
- Add pm-domains, iommu, dsi
- describe 13 MHz clock correctly
- complete CPU cache information
- add crypto support for the eMMC
- add audio controler, DPI and ADSP mailbox support
- describe CPUs as a single cluster
mt8192:
- describe 13 MHz clock correctly
- complete CPU cache information
- enable display regulators, backlight, internal display and audio on
Acer Chromebook 514
- describe CPUs as a single cluster
mt8195:
- Add power domain to t-phy
- describe 13 MHz clock correctly
- complete CPU cache information
- enable audio for Acer Chromebook Spin 513
- add ethernet support for the demo board
- add JPG enconder and decoder device
- describe CPUs as a single cluster
Smaller changes for mt6795, mt7622, mt8516 and mt6358.
* tag 'v6.2-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (58 commits)
arm64: dts: mediatek: mt8516: Fix the watchdog node name
arm64: dts: mediatek: mt7986: Fix watchdog compatible
arm64: dts: mediatek: mt8195: Fix watchdog compatible
arm64: dts: mediatek: mt8186: Fix watchdog compatible
arm64: dts: mt8173-elm: Switch to SMC watchdog
arm64: dts: mediatek: mt7622: Add missing pwm-cells to pwm node
arm64: dts: mt8192: Change idle states names to reflect actual function
arm64: dts: mt8186: Change idle states names to reflect actual function
arm64: dts: mt8195: Change idle states names to reflect actual function
arm64: dts: mt8186: Fix CPU map for single-cluster SoC
arm64: dts: mt8192: Fix CPU map for single-cluster SoC
arm64: dts: mt8195: Fix CPU map for single-cluster SoC
arm64: dts: mt8195: add jpeg decode device node
arm64: dts: mt8195: add jpeg encode device node
arm64: dts: mediatek: mt8183: drop double interrupts
arm64: dts: mediatek: mt7622: drop serial clock-names
arm64: dts: mt8195: Add efuse node to mt8195
arm64: dts: mt8183: jacuzzi: Move panel under aux-bus
arm64: dts: mediatek: mt8173-elm: Move display to ps8640 auxiliary bus
arm64: dts: mt8195: Add Ethernet controller
...
Link: https://lore.kernel.org/r/2eefe6d4-6ca3-dc5f-6a04-f4f3c49692dd@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use the correct compatible for stm32mp13 support.
The BSEC driver for STM32MP15x is not compatible with STM32MP13x. For
example the proprietary's smc STM32_SMC_BSEC is not supported in
STM32MP13x OP-TEE, it is replaced by SM32MP BSEC Pseudo Trusted
Application in OP-TEE to access to the secured IP BSEC on STM32MP13X SoC.
The correct compatible is already used in U-Boot and in upstream is in
progress for OP-TEE device tree.
As the SoC STM32MP13X is not yet official and it is not available
outside STMicroelectronics, it is the good time to break the DTS
compatibility and to correct the error done in the introduction of
STM32MP131.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The STM32MP13x Device Part Number (also named RPN in reference manual)
only uses the first 12 bits in OTP4, all the other bit are reserved and
they can be different of zero; they must be masked in NVMEM result, so
the number of bits must be defined in the nvmem cell description.
Fixes: 1da8779c00 ("ARM: dts: stm32: add STM32MP13 SoCs support")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
AM69 Starter Kit is a single board designed for TI AM69 SOC that
provides advanced system integration in automotive ADAS applications,
autonomous mobile robot and edge AI applications. The SOC comprises
of Cortex-A72s in dual clusters, lockstep capable dual Cortex-R5F MCUs,
Vision Processing Accelerators (VPAC) with Image Signal Processor (ISP)
and multiple vision assist accelerators, Depth and Motion Processing
Accelerators (DMPAC), Deep-learning Matrix Multiply Accelerator(MMA)
and C7x floating point vector DSP
AM69 SK supports the following interfaces:
* 32 GB LPDDR4 RAM
* x1 Gigabit Ethernet interface
* x3 USB 3.0 Type-A ports
* x1 USB 3.0 Type-C port
* x1 UHS-1 capable micro-SD card slot
* x4 MCAN instances
* 32 GB eMMC Flash
* 512 Mbit OSPI flash
* x2 Display connectors
* x1 PCIe M.2 M Key
* x1 PCIe M.2 E Key
* x1 4L PCIe Card Slot
* x3 CSI2 Camera interface
* 40-pin Raspberry Pi header
Add initial support for the AM69 SK board.
Design Files: https://www.ti.com/lit/zip/SPRR466
TRM: https://www.ti.com/lit/zip/spruj52
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230119132958.124435-3-sabiya.d@ti.com
AM69 Starter Kit is a single board designed for TI AM69 SoC.
The AM69 SoC belongs to the K3 Multicore SoC architecture platform,
providing advanced system integration in automotive ADAS applications,
autonomous mobile robot and edge AI applications.
Add DT binding for AM69 Starter Kit.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230119132958.124435-2-sabiya.d@ti.com
