New boards: Firefly PX30 Core SoM with JD4 baseboard, NanoPi 2S Plus,
Taishan Pi RK3566, ODROID-M1S,NanoPC-T6 LTS, Cool Pi CM5 GenBook
Big number of improvements for NanoPC-T6,QNAP-TS433 and FastRhino R66S
With recent dtc changes making it into linux-next the Wolfvision Visualizer
overlay finally compiles without warnings. And smaller number of
improvements on a number of Radxa boards.
Interesting new additions on a soc-level are the hardware RNG on rk3568,
an additional sdmmc-controller (not supported before) on rk3328 and
v4l video codecs for the rk3588 (decoding of h.264 amongst others).
* tag 'v6.12-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (62 commits)
arm64: dts: rockchip: drop unsupported regulator-property from NanoPC-T6
arm64: dts: rockchip: drop unsupported regulator property from NanoPC-T6
arm64: dts: rockchip: use correct fcs,suspend-voltage-selector on NanoPC-T6
arm64: dts: rockchip: add Mask Rom key on NanoPC-T6
arm64: dts: rockchip: enable USB-C on NanoPC-T6
arm64: dts: rockchip: enable GPU on NanoPC-T6
arm64: dts: rockchip: add IR-receiver to NanoPC-T6
arm64: dts: rockchip: add SPI flash on NanoPC-T6
arm64: dts: rockchip: add NanoPC-T6 LTS
arm64: dts: rockchip: move NanoPC-T6 parts to DTS
arm64: dts: rockchip: prepare NanoPC-T6 for LTS board
dt-bindings: arm: rockchip: Add NanoPC-T6 LTS
arm64: dts: rockchip: disable display subsystem only for Radxa E25
arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A
arm64: dts: rockchip: remove unnecessary properties for Radxa ROCK 5A
arm64: dts: rockchip: add dts for LCKFB Taishan Pi RK3566
dt-bindings: arm: rockchip: Add LCKFB Taishan Pi RK3566
dt-bindings: vendor-prefixes: Add Shenzhen JLC Technology Group LCKFB
arm64: dts: rockchip: Add Hardkernel ODROID-M1S
dt-bindings: arm: rockchip: Add Hardkernel ODROID-M1S
...
Link: https://lore.kernel.org/r/6322098.17fYzF0512@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Microchip AT91 device tree updates for v6.12
It contains:
- SAMA7G5-EK DTS was updated with EEPROM nodes containing Ethernet
addresses (needed, at least, when U-Boot is removed from the booting
chain)
- 5V supplies were added to to MCP16502 PMIC nodes for better hardware
description
- cleanups around pinctrl nodes which removed many dtbs_check warnings;
along with it the pinctrl documentation was converted to json schema
- fixes for the RTC and RTT supply clocks on SAMA7G5 and SAM9X60
- other cleanups to fix dtbs_check warnings
* tag 'at91-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g5: Fix RTT clock
ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks
dt-bindings: pinctrl: Convert Atmel PIO3 pinctrl to json-schema
ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO node
ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodes
ARM: dts: microchip: change to simple-mfd from simple-bus for PIO3 pinumux controller
ARM: dts: microchip: sama5d29_curiosity: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama5d2_icp: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g54_curiosity: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91-sama7g5ek: Add reg_5v to supply PMIC nodes
ARM: dts: microchip: at91: align LED node name with bindings
ARM: dts: microchip: sam9x60: Move i2c address/size to dtsi
ARM: dts: microchip: at91-sama7g5ek: add EEPROMs
Link: https://lore.kernel.org/r/20240901133110.2038675-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: tegra: Device tree changes for v6.12-rc1
This contains a slew of cleanups and consolidation changes for several
Orin boards and also fix some minor issues and enable more features on
the Jetson TX1.
* tag 'tegra-for-6.12-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add thermal nodes to AGX Orin SKU8
arm64: tegra: Move BPMP nodes to AGX Orin module
arm64: tegra: Move padctl supply nodes to AGX Orin module
arm64: tegra: Move AGX Orin nodes to correct location
arm64: tegra: Combine IGX Orin board files
arm64: tegra: Combine AGX Orin board files
arm64: tegra: Add common nodes to AGX Orin module
arm64: tegra: Wire up WiFi on Jetson TX1 module
arm64: tegra: Wire up Bluetooth on Jetson TX1 module
arm64: tegra: Wire up power sensors on Jetson TX1 DevKit
arm64: tegra: Add p3767 PCIe C4 EP details
arm64: tegra: Add Tegra234 PCIe C4 EP definition
arm64: tegra: Add wp-gpio for P2597's external card slot
arm64: tegra: Fix gpio for P2597 vmmc regulator
arm64: tegra: Correct location of power-sensors for IGX Orin
arm64: tegra: enable same UARTs for Orin NX/Nano
arm64: tegra: Add DMA properties for Tegra234 UARTA
Link: https://lore.kernel.org/r/20240830141004.3195210-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: tegra: Device tree changes for v6.12-rc1
These patches add a bunch more features for the TF701T board and wire up
the front panel LEDs on TrimSlice.
* tag 'tegra-for-6.12-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Wire up two front panel LEDs on TrimSlice
ARM: tegra: tf701t: Configure USB
ARM: tegra: tf701t: Use dedicated backlight regulator
ARM: tegra: tf701t: Re-group GPIO keys
ARM: tegra: tf701t: Bind WIFI SDIO and EMMC
ARM: tegra: tf701t: Complete sound bindings
ARM: tegra: tf701t: Adjust sensors nodes
ARM: tegra: tf701t: Add Bluetooth node
ARM: tegra: tf701t: Add HDMI bindings
ARM: tegra: tf701t: Correct and complete PMIC and PMC bindings
ARM: tegra: tf701t: Bind VDE device
ARM: tegra: tf701t: Use unimomentary pinmux setup
Link: https://lore.kernel.org/r/20240830141004.3195210-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
T-HEAD Devicetrees for v6.12
Add SPI controller node to th1520.dtsi and enable spi0 on the BeagleV
Ahead and LicheePi 4A.
The TH1520 AP_SYS clock driver landed in v6.11 so convert multiple
peripherals like mmc and uart from fixed clocks to the clock controller.
All of these patches have been successfully tested in the latest
linux-next releases.
Signed-off-by: Drew Fustini <drew@pdp7.com>
* tag 'thead-dt-for-v6.12' of https://github.com/pdp7/linux:
riscv: dts: thead: change TH1520 SPI node to use clock controller
riscv: dts: thead: add clock to TH1520 gpio nodes
riscv: dts: thead: update TH1520 dma and timer nodes to use clock controller
riscv: dts: thead: change TH1520 mmc nodes to use clock controller
riscv: dts: thead: change TH1520 uart nodes to use clock controller
riscv: dts: thead: Add TH1520 AP_SUBSYS clock controller
riscv: dts: thead: add basic spi node
Link: https://lore.kernel.org/r/ZsWs8QiVruMXjzPc@x1
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
vcc3v3-sd-s0-regulator used enable-active-low. According the binding
of the fixed regulator, that is the assumed mode of operation if
enable-active-high is not specified. So this is property is not part
of the binding, therefore remove it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240829132100.1723127-4-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
One of the key differences between p3701-0000 and p3701-0008 is the
temperature range. Add this info for p3701-0008.
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All SKUs of the p3701 module contain a temp sensor connected to the
BPMP I2C. Move the associated nodes from tegra234-p3701-0008.dtsi
to tegra234-p3701.dtsi. Add missing compatible.
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Some padctl supply nodes currently reside in board file, when they
should reside on module level. The nodes are part of module,
not board. Move these nodes to the correct AGX Orin
module file.
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Some of the nodes inside the AGX Orin module file are in the
wrong location. In particular, the SD card interface and
two of the PCIe regulators in the module file should instead
reside in the board file. These components are not part of the
module. They are part of the carrier board. Move these
nodes to the correct location.
Fixes: cd42b26a52 ("arm64: tegra: Add regulators required for PCIe")
Fixes: d71b893a11 ("arm64: tegra: Add Tegra234 SDMMC1 device tree node")
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Current IGX Orin structure has both a top-level module+board
file as well as a board file. Most of the data in the board-file
is closely related to the module itself. The benefit of this
extra file is outweighed by the additional complexity. Merge
the board file into the module+board file for simplicity.
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The current AGX Orin structure has both a top-level module+board
file as well as a board file. Most of the data in the board-file
is closely related to the module itself. The benefit of this
extra file is outweighed by the additional complexity. Merge
the board file into the module+board file for simplicity.
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The AGX Orin module boards contain common nodes that can
be moved to the included module dtsi. This eliminates
redundancy within the files and reduces lines of code.
Data from tegra234-p3701-0000 and tegra234-p3701-0008 that
is common is now in tegra234-p3701.dtsi.
Signed-off-by: Dara Stotland <dstotland@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pins responsible for controlling these LEDs need to have tristate
control removed if we want them as GPIOs. This change aligns with
pinmux configuration of "dte" pin group in downstream kernel[1].
These LEDs had no function assigned on vendor kernel and there is no
label on the case, the only markings are on PCB which are part of node
names (ds1 marking is on power LED controlled by PMIC), so generic term
is assigned as the function.
1. https://github.com/compulab/trimslice-android-kernel/blob/upstream/arch/arm/mach-tegra/board-trimslice-pinmux.c#L45
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
P2180 modules have WiFi in form of BCM4354 chip, and kernel driver
supports this one, so enable it for all users. The necessary calibration
file can be obtained from Jetson Linux Archive. nvram.txt file is
located in "Driver Package (BSP)" in
nv_tegra/l4t_deb_packages/nvidia-l4t-firmware_<version>_arm64.deb
archive. The rest of necessary blobs can be obtained from official
Linux Firmware repository or (newer ones) from Infineon
ifx-linux-firmware repository (look in older releases).
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
P2180 modules have Bluetooth in form of BCM4354 chip, and kernel driver
supports this one, so enable it for all users. The necessary firmware
can be obtained from Jetson Linux Archive. bcm4354.hcd file is located
in "Driver Package (BSP)" in
nv_tegra/l4t_deb_packages/nvidia-l4t-firmware_<version>_arm64.deb
archive.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
One INA3221 sensor is located on P2180 module and the other two are on
P2597 base board.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add implementation details for Orin NX/Nano PCIe EP on C4.
Signed-off-by: Vedant Deshpande <vedantd@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add PCIe C4 EP controller definition in device tree for Tegra234
devices.
Signed-off-by: Vedant Deshpande <vedantd@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the definition for the wp-gpio of the P2597's external card slot,
enabling this functionality.
Tested on a P2597 board.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The current declaration is off-by-one and actually corresponds to the
wp-gpio of the external slot.
Tested on a P2597 board.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fixes issue when resuming after suspend made USB in peripheral
mode inaccessible.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Downstream kernel states that backlight has no actual enable GPIO
and uses fixed regulator.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add MMC nodes configuration along with WIFI binding to ASUS TF701T
device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
With these changes sound works, only UCM configs are needed for
complete support.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Complete and adjust magnetometer, thermal sensor, motion tracker,
power and light sensors according to available sources.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add serial node along with bluetooth node to ASUS TF701T device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Mimic original downstream board behavior to set up all pinmux at once.
Per-device pinmux is good but we have no complete board schematics
to allow such luxury.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In the LTS (2310) version the miniPCIe slot got removed and USB 2.0
setup has changed. There are two external accessible ports and two ports
on the internal header.
There is an on-board USB hub which provides:
- one external connector (bottom one)
- two internal ports on pin header
- one port for m.2 E connector
The top USB 2.0 connector comes directly from the SoC.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Link: https://lore.kernel.org/r/20240829-friendlyelec-nanopc-t6-lts-v6-4-edff247e8c02@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
