When DW_I3C_DISABLE_RUNTIME_PM_QUIRK is set, the probe function calls
pm_runtime_get_noresume() to prevent runtime suspend. However, if
i3c_master_register() fails, the error path does not balance this
call, leaving the usage count incremented.
Add pm_runtime_put_noidle() in the error cleanup path to properly
balance the usage count.
Fixes: fba0e56ee7 ("i3c: dw: Disable runtime PM on Agilex5 to avoid bus hang on IBI")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260321-dw-i3c-1-v1-1-821623aac7bb@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Intel LPSS I3C controllers can wake from runtime suspend to receive
in-band interrupts (IBIs), and they also implement the MIPI I3C HCI
Multi-Bus Instance capability. When multiple I3C bus instances share the
same PCI wakeup, the PCI parent must coordinate runtime PM so that all
instances suspend together and their mipi-i3c-hci runtime suspend
callbacks are invoked in a consistent manner.
Enable IBI-based wakeup by setting HCI_QUIRK_RPM_IBI_ALLOWED for the
intel-lpss-i3c platform device. Also set HCI_QUIRK_RPM_PARENT_MANAGED so
that the mipi-i3c-hci core driver expects runtime PM to be controlled by
the PCI parent rather than by individual instances. For all Intel HCI PCI
configurations, enable the corresponding control_instance_pm flag in the
PCI driver.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306085338.62955-6-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Some platforms implement the MIPI I3C HCI Multi-Bus Instance capability,
where a single parent device hosts multiple I3C controller instances. In
such designs, the parent - not the individual child instances - may need to
coordinate runtime PM so that all controllers runtime PM callbacks are
invoked in a controlled and synchronized manner.
For example, if the parent enables IBI-wakeup when transitioning into a
low-power state, every bus instance must remain able to receive IBIs up
until that point. This requires deferring the individual controllers'
runtime suspend callbacks (which disable bus activity) until the parent
decides it is safe for all instances to suspend together.
To support this usage model:
* Add runtime PM and system PM callbacks in the PCI driver to invoke
the mipi-i3c-hci driver's runtime PM callbacks for each instance.
* Introduce a driver-data flag, control_instance_pm, which opts into
the new parent-managed PM behaviour.
* Ensure the callbacks are only used when the corresponding instance is
operational at suspend time. This is reliable because the operational
state cannot change while the parent device is undergoing a PM
transition, and PCI always performs a runtime resume before system
suspend on current configurations, so that suspend and resume alternate
irrespective of whether it is runtime or system PM.
By that means, parent-managed runtime PM coordination for multi-instance
MIPI I3C HCI PCI devices is provided without altering existing behaviour on
platforms that do not require it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306085338.62955-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Some platforms implement the MIPI I3C HCI Multi-Bus Instance capability,
where a single parent device hosts multiple I3C controller instances. In
such designs, the parent - not the individual child instances - may need to
coordinate runtime PM so that all controllers runtime PM callbacks are
invoked in a controlled and synchronized manner.
For example, if the parent enables IBI-wakeup when transitioning into a
low-power state, every bus instance must remain able to receive IBIs up
until that point. This requires deferring the individual controllers'
runtime suspend callbacks (which disable bus activity) until the parent
decides it is safe for all instances to suspend together.
To support this usage model:
* Export the low-level runtime PM suspend and resume helpers so that
the parent can explicitly invoke them.
* Add a new quirk, HCI_QUIRK_RPM_PARENT_MANAGED, allowing platforms to
bypass per-instance runtime PM callbacks and delegate control to the
parent device.
* Move DEFAULT_AUTOSUSPEND_DELAY_MS into the header so it can be shared
by parent-managed PM implementations.
The new quirk allows platforms with multi-bus parent-managed PM
infrastructure to correctly coordinate runtime PM across all I3C HCI
instances.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306085338.62955-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Some I3C controllers can be automatically runtime-resumed in order to
handle in-band interrupts (IBIs), meaning that runtime suspend does not
need to be blocked when IBIs are enabled.
For example, a PCI-attached controller in a low-power state may generate
a Power Management Event (PME) when the SDA line is pulled low to signal
the START condition of an IBI. The PCI subsystem will then runtime-resume
the device, allowing the IBI to be received without requiring the
controller to remain active.
Introduce a new quirk, HCI_QUIRK_RPM_IBI_ALLOWED, so that drivers can
opt-in to this capability via driver data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306085338.62955-3-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The DesignWare I3C master controller ACKs IBIs as soon as a valid
Device Address Table (DAT) entry is present. This can create a race
between device attachment (after DAA) and the point where the client
driver enables IBIs via i3c_device_enable_ibi().
Set DEV_ADDR_TABLE_SIR_REJECT in the DAT entry during
attach_i3c_dev() and reattach_i3c_dev() so that IBIs are rejected
by default. The bit is managed thereafter by the existing
dw_i3c_master_set_sir_enabled() function, which clears it in
enable_ibi() after ENEC is issued, and restores it in disable_ibi()
after DISEC.
Fixes: 1dd728f5d4 ("i3c: master: Add driver for Synopsys DesignWare IP")
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/53f5b8cbdd8af789ec38b95b02873f32f9182dd6.1770962368.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The DesignWare I3C master driver creates a virtual I2C adapter to
provide backward compatibility with I2C devices. However, the current
implementation does not associate this virtual adapter with any
Device Tree node.
Propagate the of_node from the I3C master platform device to the
virtual I2C adapter's device structure. This ensures that standard
I2C aliases are correctly resolved and bus numbering remains consistent.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260302075645.1492766-1-peteryin.openbmc@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Disruption of the MIPI I3C HCI controller's internal state can cause
i3c_hci_bus_disable() to fail when attempting to shut down the bus.
In the code paths where bus disable is invoked - bus clean-up and runtime
suspend - the controller does not need to remain operational afterward, so
a full controller reset is a safe recovery mechanism.
Add a fallback to issue a software reset when disabling the bus fails.
This ensures the bus is reliably halted even if the controller's state
machine is stuck or unresponsive.
The fallback is used both during bus clean-up and in the runtime suspend
path. In the latter case, ensure interrupts are quiesced after reset.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-15-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Shared interrupts may fire unexpectedly, including during periods when the
controller is not yet fully initialized. Commit b9a15012a1
("i3c: mipi-i3c-hci: Add optional Runtime PM support") addressed this issue
for the runtime-suspended state, but the same problem can also occur before
the bus is enabled for the first time.
Ensure the IRQ handler ignores interrupts until initialization is complete
by making consistent use of the existing irq_inactive flag. The flag is
now set to false immediately before enabling the bus.
To guarantee correct ordering with respect to the IRQ handler, protect
all transitions of irq_inactive with the same spinlock used inside the
handler.
Fixes: b8460480f6 ("i3c: mipi-i3c-hci: Allow for Multi-Bus Instances")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-14-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The DMA ring halts whenever a transfer encounters an error. The interrupt
handler previously attempted to detect this situation and restart the ring
if a transfer completed at the same time. However, this restart logic runs
entirely in interrupt context and is inherently racy: it interacts with
other paths manipulating the ring state, and fully serializing it within
the interrupt handler is not practical.
Move this error-recovery logic out of the interrupt handler and into the
transfer-processing path (i3c_hci_process_xfer()), where serialization and
state management are already controlled. Introduce a new optional I/O-ops
callback, handle_error(), invoked when a completed transfer reports an
error. For DMA operation, the implementation simply calls the existing
dequeue function, which safely aborts and restarts the ring when needed.
This removes the fragile ring-restart logic from the interrupt handler and
centralizes error handling where proper sequencing can be ensured.
Fixes: ccdb2e0e3b ("i3c: mipi-i3c-hci: Add Intel specific quirk to ring resuming")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-13-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Several parts of the MIPI I3C HCI driver duplicate the same sequence for
queuing a transfer, waiting for completion, and handling timeouts. This
logic appears in five separate locations and will be affected by an
upcoming fix.
Refactor the repeated code into a new helper, i3c_hci_process_xfer(), and
store the timeout value in the hci_xfer structure so that callers do not
need to pass it as a separate parameter.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-12-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The DMA dequeue path attempts to restart the ring after aborting an
in-flight transfer, but the current sequence is incomplete. The controller
must be brought out of the aborted state and the ring control registers
must be programmed in the correct order: first clearing ABORT, then
re-enabling the ring and asserting RUN_STOP to resume operation.
Add the missing controller resume step and update the ring control writes
so that the ring is restarted using the proper sequence.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-11-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The internal control command descriptor used for no-op commands includes a
Transaction ID (TID) field, but the no-op command constructed in
hci_dma_dequeue_xfer() omitted it. As a result, the hardware receives a
no-op descriptor without the expected TID.
This bug has gone unnoticed because the TID is currently not validated in
the no-op completion path, but the descriptor format requires it to be
present.
Add the missing TID field when generating a no-op descriptor so that its
layout matches the defined command structure.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-10-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The logic used to abort the DMA ring contains several flaws:
1. The driver unconditionally issues a ring abort even when the ring has
already stopped.
2. The completion used to wait for abort completion is never
re-initialized, resulting in incorrect wait behavior.
3. The abort sequence unintentionally clears RING_CTRL_ENABLE, which
resets hardware ring pointers and disrupts the controller state.
4. If the ring is already stopped, the abort operation should be
considered successful without attempting further action.
Fix the abort handling by checking whether the ring is running before
issuing an abort, re-initializing the completion when needed, ensuring that
RING_CTRL_ENABLE remains asserted during abort, and treating an already
stopped ring as a successful condition.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-9-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The DMA ring bookkeeping in the MIPI I3C HCI driver is updated from two
contexts: the DMA ring dequeue path (hci_dma_dequeue_xfer()) and the
interrupt handler (hci_dma_xfer_done()). Both modify the ring's
in-flight transfer state - specifically rh->src_xfers[] and
xfer->ring_entry - but without any serialization. This allows the two
paths to race, potentially leading to inconsistent ring state.
Serialize access to the shared ring state by extending the existing
spinlock to cover the DMA dequeue path and the entire interrupt handler.
Since the core IRQ handler now holds this lock, remove the per-function
locking from the PIO and DMA sub-handlers.
Additionally, clear the completed entry in rh->src_xfers[] in
hci_dma_xfer_done() so it cannot be matched or completed again.
Finally, place the ring restart sequence under the same lock in
hci_dma_dequeue_xfer() to avoid concurrent enqueue or completion
operations while the ring state is being modified.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-8-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for
multiple transfers that timeout around the same time. However, the
function is not serialized and can race with itself.
When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes
incomplete transfers, and then restarts the ring. If another timeout
triggers a parallel call into the same function, the two instances may
interfere with each other - stopping or restarting the ring at unexpected
times.
Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to
itself.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-7-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The I3C subsystem allows multiple transfers to be queued concurrently.
However, the MIPI I3C HCI driver's DMA enqueue path, hci_dma_queue_xfer(),
lacks sufficient serialization.
In particular, the allocation of the enqueue_ptr and its subsequent update
in the RING_OPERATION1 register, must be done atomically. Otherwise, for
example, it would be possible for 2 transfers to be allocated the same
enqueue_ptr.
Extend the use of the existing spinlock for that purpose. Keep a count of
the number of xfers enqueued so that it is easy to determine if the ring
has enough space.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-6-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The MIPI I3C HCI driver currently uses separate spinlocks for different
contexts (PIO vs. DMA rings). This split is unnecessary and complicates
upcoming fixes. The driver does not support concurrent PIO and DMA
operation, and it only supports a single DMA ring, so a single lock is
sufficient for all paths.
Introduce a unified spinlock in struct i3c_hci, switch both PIO and DMA
code to use it, and remove the per-context locks.
No functional change is intended in this patch.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Prepare for fixing a race in the DMA ring enqueue path when handling
parallel transfers. Move all DMA mapping out of hci_dma_queue_xfer()
and into a new helper that performs the mapping up front.
This refactoring allows the upcoming fix to extend the spinlock coverage
around the enqueue operation without performing DMA mapping under the
spinlock.
No functional change is intended in this patch.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
All combined i2c/i3c drivers appear to suffer from the same link
time problem when CONFIG_I3C is set to 'm':
arm-linux-gnueabi-ld: drivers/iio/magnetometer/mmc5633.o: in function `mmc5633_i3c_driver_init':
mmc5633.c:(.init.text+0x30): undefined reference to `i3c_driver_register_with_owner'
This was previously fixed every time by marking individual
drivers as 'depends on I2C; depends on I3C || !I3C', but this gets
tedious and is somewhat confusing.
Add a Kconfig symbol 'I3C_OR_I2C' to help replace those dependencies,
and use this in all the existing drivers that had already fixed it
as well as the new mmc5633 driver.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260204164216.544409-1-arnd@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Pull fsverity fixes from Eric Biggers:
- Fix a build error on parisc
- Remove the non-large-folio-aware function fsverity_verify_page()
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: fix build error by adding fsverity_readahead() stub
fsverity: remove fsverity_verify_page()
f2fs: make f2fs_verify_cluster() partially large-folio-aware
f2fs: remove unnecessary ClearPageUptodate in f2fs_verify_cluster()
Pull crypto library fix from Eric Biggers:
"Fix a big endian specific issue in the PPC64-optimized AES code"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: powerpc/aes: Fix rndkey_from_vsx() on big endian CPUs
Stephen retired and stepped back from -next maintainership, update his
entry in CREDITS to recognise his 18 years of hard work making it what
it is today and all the impact it's had on our development process.
Also update to his current GnuPG key while we're here.
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The x509 public key code gained a dependency on the sha256 hash
implementation, causing a rare link time failure in randconfig
builds:
arm-linux-gnueabi-ld: crypto/asymmetric_keys/x509_public_key.o: in function `x509_get_sig_params':
x509_public_key.c:(.text.x509_get_sig_params+0x12): undefined reference to `sha256'
arm-linux-gnueabi-ld: (sha256): Unknown destination type (ARM/Thumb) in crypto/asymmetric_keys/x509_public_key.o
x509_public_key.c:(.text.x509_get_sig_params+0x12): dangerous relocation: unsupported relocation
Select the necessary library code from Kconfig.
Fixes: 2c62068ac8 ("x509: Separately calculate sha256 for blacklist")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Align to the commit bf4afc53b7 ("Convert 'alloc_obj' family to use the
new default GFP_KERNEL argument") update the 'kmalloc_obj' declaration
for userspace to fix below compile error:
In file included from arch/arm/boot/compressed/../../../../lib/decompress_unxz.c:241,
from arch/arm/boot/compressed/decompress.c:56:
arch/arm/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'xz_dec_init':
arch/arm/boot/compressed/../../../../lib/xz/xz_dec_stream.c:787:28: error: implicit declaration of function 'kmalloc_obj'; did you mean 'kmalloc'? [-Wimplicit-function-declaration]
787 | struct xz_dec *s = kmalloc_obj(*s);
| ^~~~~~~~~~~
| kmalloc
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Fixes: 69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Fixes: bf4afc53b7 ("Convert 'alloc_obj' family to use the new default GFP_KERNEL argument")
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull RTC updates from Alexandre Belloni:
- loongson: Loongson-2K0300 support
- s35390a: nvmem support
- zynqmp: rework calibration
* tag 'rtc-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: ds1390: fix number of bytes read from RTC
rtc: class: Remove duplicate check for alarm
rtc: optee: simplify OP-TEE context match
rtc: interface: Alarm race handling should not discard preceding error
rtc: s35390a: implement nvmem support
rtc: loongson: Add Loongson-2K0300 support
dt-bindings: rtc: loongson: Document Loongson-2K0300 compatible
dt-bindings: rtc: loongson: Correct Loongson-1C interrupts property
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2N support
dt-bindings: rtc: cpcap: convert to schema
rtc: zynqmp: use dynamic max and min offset ranges
rtc: zynqmp: rework set_offset
rtc: zynqmp: rework read_offset
rtc: zynqmp: check calibration max value
rtc: zynqmp: correct frequency value
rtc: amlogic-a4: Remove IRQF_ONESHOT
rtc: pcf8563: use correct of_node for output clock
rtc: max31335: use correct CONFIG symbol in IS_REACHABLE()
rtc: nvvrs: Add ARCH_TEGRA to the NV VRS RTC driver
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Pass '-Zunstable-options' flag required by the future Rust 1.95.0
- Fix 'objtool' warning for Rust 1.84.0
'kernel' crate:
- 'irq' module: add missing bound detected by the future Rust 1.95.0
- 'list' module: add missing 'unsafe' blocks and placeholder safety
comments to macros (an issue for future callers within the crate)
'pin-init' crate:
- Clean Clippy warning that changed behavior in the future Rust
1.95.0"
* tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: list: Add unsafe blocks for container_of and safety comments
rust: pin-init: replace clippy `expect` with `allow`
rust: irq: add `'static` bounds to irq callbacks
objtool/rust: add one more `noreturn` Rust function
rust: kbuild: pass `-Zunstable-options` for Rust 1.95.0
Pull runtime verifier fix from Steven Rostedt:
- Fix multiple definition of __pcpu_unique_da_mon_this
After refactoring monitors, we used static per-cpu variables with the
same names across different per-cpu monitors. This is explicitly
disallowed for modules on some architectures (alpha) or if
CONFIG_DEBUG_FORCE_WEAK_PER_CPU is enabled (e.g. Fedora's debug
kernel). Make sure all those variables have different names to avoid
compilation issues.
* tag 'trace-rv-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix multiple definition of __pcpu_unique_da_mon_this
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Most simple allocations use GFP_KERNEL, and with the new allocation
helpers being introduced, let's just take advantage of that to simplify
that default case.
It's a numbers game:
git grep 'alloc_obj(' |
sed 's/.*\(GFP_[_A-Z]*\).*/\1/' |
sort | uniq -c | sort -n | tail
shows that about 90% of all those new allocator instances just use that
standard GFP_KERNEL.
Those helpers are already macros, and we can easily just make it be the
default case when the gfp argument is missing.
And yes, we could do that for all the legacy interfaces too, but let's
keep it to just the new ones at least for now, since those all got
converted recently anyway, so this is not any "extra" noise outside of
that limited conversion.
And, in fact, I want to do this before doing the -rc1 release, exactly
so that we don't get extra merge conflicts.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for
non-scalar types") started using the new allocation helpers, and in the
process showed that they were completely non-working.
The overflow logic in overflows_flex_counter_type() is completely the
wrong way around, and that broke __alloc_flex() completely. By chance,
the resulting code was then such a mess that clang generated
sufficiently garbage code that objtool warned about it all. Which made
it somewhat quicker to narrow things down.
While fixing overflows_flex_counter_type() would presumably fix this
all, I'm excising the whole broken overflow logic from __alloc_flex(),
because we don't want that kind of code in basic allocation functions
anyway.
That (no longer) broken overflows_flex_counter_type() thing needs to be
inserted into the actual __set_flex_counter() logic in the unlikely case
that we ever want this at all. And made conditional.
Fixes: 81cee9166a ("compiler_types: Introduce __flex_counter() and family")
Fixes: 69050f8d6d ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Cc: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/all/CAHk-=whEd020BYzGTzYrENjD9Z5_82xx6h8HsQvH5xDSnv0=Hw@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull kmalloc_obj conversion from Kees Cook:
"This does the tree-wide conversion to kmalloc_obj() and friends using
coccinelle, with a subsequent small manual cleanup of whitespace
alignment that coccinelle does not handle.
This uncovered a clang bug in __builtin_counted_by_ref(), so the
conversion is preceded by disabling that for current versions of
clang. The imminent clang 22.1 release has the fix.
I've done allmodconfig build tests for x86_64, arm64, i386, and arm. I
did defconfig builds for alpha, m68k, mips, parisc, powerpc, riscv,
s390, sparc, sh, arc, csky, xtensa, hexagon, and openrisc"
* tag 'kmalloc_obj-treewide-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kmalloc_obj: Clean up after treewide replacements
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
compiler_types: Disable __builtin_counted_by_ref for Clang
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Introduce 'perf sched stats' tool with record/report/diff workflows
using schedstat counters
- Add a faster libdw based addr2line implementation and allow selecting
it or its alternatives via 'perf config addr2line.style='
- Data-type profiling fixes and improvements including the ability to
select fields using 'perf report''s -F/-fields, e.g.:
'perf report --fields overhead,type'
- Add 'perf test' regression tests for Data-type profiling with C and
Rust workloads
- Fix srcline printing with inlines in callchains, make sure this has
coverage in 'perf test'
- Fix printing of leaf IP in LBR callchains
- Fix display of metrics without sufficient permission in 'perf stat'
- Print all machines in 'perf kvm report -vvv', not just the host
- Switch from SHA-1 to BLAKE2s for build ID generation, remove SHA-1
code
- Fix 'perf report's histogram entry collapsing with '-F' option
- Use system's cacheline size instead of a hardcoded value in 'perf
report'
- Allow filtering conversion by time range in 'perf data'
- Cover conversion to CTF using 'perf data' in 'perf test'
- Address newer glibc const-correctness (-Werror=discarded-qualifiers)
issues
- Fixes and improvements for ARM's CoreSight support, simplify ARM SPE
event config in 'perf mem', update docs for 'perf c2c' including the
ARM events it can be used with
- Build support for generating metrics from arch specific python
script, add extra AMD, Intel, ARM64 metrics using it
- Add AMD Zen 6 events and metrics
- Add JSON file with OpenHW Risc-V CVA6 hardware counters
- Add 'perf kvm' stats live testing
- Add more 'perf stat' tests to 'perf test'
- Fix segfault in `perf lock contention -b/--use-bpf`
- Fix various 'perf test' cases for s390
- Build system cleanups, bump minimum shellcheck version to 0.7.2
- Support building the capstone based annotation routines as a plugin
- Allow passing extra Clang flags via EXTRA_BPF_FLAGS
* tag 'perf-tools-for-v7.0-1-2026-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (255 commits)
perf test script: Add python script testing support
perf test script: Add perl script testing support
perf script: Allow the generated script to be a path
perf test: perf data --to-ctf testing
perf test: Test pipe mode with data conversion --to-json
perf json: Pipe mode --to-ctf support
perf json: Pipe mode --to-json support
perf check: Add libbabeltrace to the listed features
perf build: Allow passing extra Clang flags via EXTRA_BPF_FLAGS
perf test data_type_profiling.sh: Skip just the Rust tests if code_with_type workload is missing
tools build: Fix feature test for rust compiler
perf libunwind: Fix calls to thread__e_machine()
perf stat: Add no-affinity flag
perf evlist: Reduce affinity use and move into iterator, fix no affinity
perf evlist: Missing TPEBS close in evlist__close()
perf evlist: Special map propagation for tool events that read on 1 CPU
perf stat-shadow: In prepare_metric fix guard on reading NULL perf_stat_evsel
Revert "perf tool_pmu: More accurately set the cpus for tool events"
tools build: Emit dependencies file for test-rust.bin
tools build: Make test-rust.bin be removed by the 'clean' target
...
Pull coccinelle updates from Julia Lawall:
"This simplifies and clarifies the handling of output generated by
Coccinelle that is sent to standard error.
By default, this goes to /dev/null. Remind the user of that and
encourage them to provide another file name (Benjamin Philip)"
* tag 'cocci-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
Documentation: Coccinelle: document debug log handling
scripts: coccicheck: warn on unset debug file
scripts: coccicheck: simplify debug file handling
Pull NTB (PCIe non-transparent bridge) updates from Jon Mason:
"NTB updates include debugfs improvements, correctness fixes, cleanups,
and new hardware support:
ntb_transport QP stats are converted to seq_file, a tx_memcpy_offload
module parameter is introduced with associated ordering fixes, and a
debugfs queue name truncation bug is corrected.
Additional fixes address format specifier mismatches in ntb_tool and
boundary conditions in the Switchtec driver, while unused MSI helpers
are removed and the codebase migrates to dma_map_phys().
Intel Gen6 (Diamond Rapids) NTB support is also added"
* tag 'ntb-7.0' of https://github.com/jonmason/ntb:
NTB: ntb_transport: Use seq_file for QP stats debugfs
NTB: ntb_transport: Fix too small buffer for debugfs_name
ntb/ntb_tool: correct sscanf format for u64 and size_t in tool_peer_mw_trans_write
ntb: intel: Add Intel Gen6 NTB support for DiamondRapids
NTB/msi: Remove unused functions
ntb: ntb_hw_switchtec: Increase MAX_MWS limit to 256
ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access
ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut
NTB: epf: allow built-in build
ntb: migrate to dma_map_phys instead of map_page
NTB: ntb_transport: Add 'tx_memcpy_offload' module option
NTB: ntb_transport: Remove unused 'retries' field from ntb_queue_entry
