Hook up drm_crtc_vblank_on_config() in amdgpu_dm. So, that we can enable
PSR and other static screen optimizations more quickly, while avoiding
stuttering issues that are accompanied by the following dmesg error:
[drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3
This also allows us to mimic how vblanking is handled by the Windows
amdgpu driver. Specifically, we wait two idle frames before disabling
the vblank timer there.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822161856.174600-2-hamza.mahfooz@amd.com
This patch adds a new panic screen, with a QR code and the kmsg data
embedded.
If DRM_PANIC_SCREEN_QR_CODE_URL is set, then the kmsg data will be
compressed with zlib and encoded as a numerical segment, and appended
to the URL as a URL parameter. This allows to save space, and put
about ~7500 bytes of kmsg data, in a V40 QR code.
Linux distributions can customize the URL, and put a web frontend to
directly open a bug report with the kmsg data.
Otherwise the kmsg data will be encoded as a binary segment (ie raw
ascii) and only a maximum of 2953 bytes of kmsg data will be
available in the QR code.
You can also limit the QR code size with DRM_PANIC_SCREEN_QR_VERSION.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822073852.562286-5-jfalempe@redhat.com
The commit 0f5251339e ("drm/vc4: hdmi: Make sure the controller is
powered in detect") introduced the necessary power management handling
to avoid register access while controller is powered down.
Unfortunately it just print a warning if pm_runtime_resume_and_get()
fails and proceed anyway.
This could happen during suspend to idle. So we must assume it is unsafe
to access the HDMI register. So bail out properly.
Fixes: 0f5251339e ("drm/vc4: hdmi: Make sure the controller is powered in detect")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821214052.6800-3-wahrenst@gmx.net
Ast's BMC connector tracks the status of an underlying physical
connector and updates the BMC status accordingly. This functionality
works around GNOME's settings app, which cannot handle multiple
outputs on the same CRTC.
The workaround is now obsolete as all code for physical outputs
handle BMC support internally. Hence, remove the driver's code and
the BMC output entirely.
v3:
- remove struct ast_bmc_connector
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-12-tzimmermann@suse.de
Permanently set the connector status to 'connected'. Return BMC modes
for connector if no display is attached to the physical DP connector.
Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still
generates a hotplug event. DRM clients will then reconfigure their
output to a mode appropriate for either physical display or BMC.
v3:
- use struct ast_connector.physical_status to handle BMC
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-11-tzimmermann@suse.de
Permanently set the connector status to 'connected'. Return BMC modes
for connector if no display is attached to the physical DP connector.
Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still
generates a hotplug event. DRM clients will then reconfigure their
output to a mode appropriate for either physical display or BMC.
v3:
- use struct ast_connector.physical_status to handle BMC
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-10-tzimmermann@suse.de
Permanently set the connector status to 'connected'. Return BMC modes
for connector if no display is attached to the physical DP connector.
Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still
generates a hotplug event. DRM clients will then reconfigure their
output to a mode appropriate for either physical display or BMC.
v3:
- use struct ast_connector.physical_status to handle BMC
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-9-tzimmermann@suse.de
Permanently set the connector status to 'connected'. Return BMC modes
for connector if no display is attached to the physical DP connector.
Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still
generates a hotplug event. DRM clients will then reconfigure their
output to a mode appropriate for either physical display or BMC.
v3:
- use struct ast_connector.physical_status to handle BMC
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-7-tzimmermann@suse.de
Convert ASTDP support to struct drm_edid and its helpers. Simplifies
and modernizes the EDID handling.
The driver reads 4 bytes at once, but the overall read length is now
variable. Therefore update the EDID read loop to never return more than
the requested bytes.
The device does not seem to support EDID extensions, as the driver
actively clears any such information from the main EDID header. As
the new interface allows for reading extension blocks for EDID, make
sure that the block is always 0 (i.e., the main header). A later
update might fix that.
v2:
- fix reading if len is not a multiple of 4
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-5-tzimmermann@suse.de
Move the "exit sleep mode" and "set display on" command from
enable() to init() function.
As mentioned in the patch:
https://lore.kernel.org/all/20240624141926.5250-2-lvzhaoxiong@huaqin.corp-partner.google.com/
The Mediatek Soc DSI host has different modes in prepare() and
enable() functions, prepare() is in LP mode and enable() is in
HS mode. Since the "exit sleep mode" and "set display on"
command must also be sent in LP mode, so we also move "exit
sleep mode" and "set display on" command to the init() function.
We have no other actions in the enable() function after moves
"exit sleep mode" and "set display on", and we checked the call
of the enable() function during the "startup" process. It seems
that only one judgment was made in drm_panel_enabel(). If the
panel does not define enable(), the judgment will skip the
enable() and continue execution. This does not seem to have
any other effect, and we found that some drivers also seem
to have no enable() function added, for example:
panel-asus-z00t-tm5p5-n35596 / panel-boe-himax8279d...
In addition, we briefly tested the kingdisplay_kd101ne3 panel and
melfas_lmfbx101117480 panel, and it seems that there is no garbage
on the panel, so we delete enable() function.
After moving the "exit sleep mode" and "set display on" command
to the init() function, we no longer need additional delay
judgment, so we delete variables "exit_sleep_to_display_on_delay_ms"
and "display_on_delay_ms".
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240807100429.13260-2-lvzhaoxiong@huaqin.corp-partner.google.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807100429.13260-2-lvzhaoxiong@huaqin.corp-partner.google.com
The RG28XX panel is a display panel of the Anbernic RG28XX, a handheld
gaming device from Anbernic. It is 2.8 inches in size (diagonally) with
a resolution of 480x640.
This panel is driven by a variant of the ST7701 driver IC internally,
confirmed by dumping and analyzing its BSP initialization sequence
by using a logic analyzer. It is very similar to the existing
densitron,dmt028vghmcmi-1a panel, but differs in some unknown
register values, so add a new entry for the panel to distinguish them.
Additionally, the panel only has an SPI instead of MIPI DSI.
So add and modify for SPI as well.
Although a panel connected via SPI with a D/CX pin theoretically exists,
no such panels have been found for this driver yet. Therefore, disable
the use of the dc-gpios property for all currently known devices.
Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240804061503.881283-4-kikuchan98@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804061503.881283-4-kikuchan98@gmail.com
There's no need to get the length of an DT array property before
parsing the array. of_property_read_variable_u8_array() takes a minimum
and maximum length and returns the actual length (or error code).
This is part of a larger effort to remove callers of of_get_property()
and similar functions. of_get_property() leaks the DT property data
pointer which is a problem for dynamically allocated nodes which may
be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731201407.1838385-4-robh@kernel.org
If the bridge is attached with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set,
this driver won't initialize a connector and hence display mode won't be
validated in drm_connector_helper_funcs::mode_valid(). So, move the mode
validation from drm_connector_helper_funcs::mode_valid() to
drm_bridge_funcs::mode_valid(), because the mode validation is always done
for the bridge.
Fixes: 30e2ae943c ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813091637.1054586-1-victor.liu@nxp.com
