The driver fails to register with error -22 (EINVAL) due to a cfg80211
validation failure in wiphy_verify_iface_combinations().
Commit 5ef0e8e265 ("wifi: mt76: mt7996: fix iface combination for
different chipsets") added beacon_int_min_gcd to if_comb_global and
if_comb_global_7992, but these combinations include ADHOC (IBSS)
interface type. This violates a cfg80211 rule from commit 56271da29c
("cfg80211: disallow beacon_int_min_gcd with IBSS") that explicitly
forbids combining ADHOC with beacon_int_min_gcd.
The restriction exists because beacon_int_min_gcd requires static,
predictable beacon intervals to coordinate multiple beaconing interfaces,
but ADHOC interfaces have dynamic beacon intervals that change when
joining different networks, making the GCD constraint unenforceable.
Remove beacon_int_min_gcd from the interface combinations that include
ADHOC because they are not necessary for ADHOC operation. The if_comb
combination (AP/MESH/STA only, without ADHOC) correctly retains
beacon_int_min_gcd for multi-AP coordination.
Fixes: 5ef0e8e265 ("wifi: mt76: mt7996: fix iface combination for different chipsets")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Tested-by: Alex Gavin <alex.gavin@candelatech.com>
Link: https://patch.msgid.link/20260702104337.679536-1-jtornosm@redhat.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When mac80211 leaves the link unspecified, mt7996_tx() substitutes the
primary link id of the station or vif. That value is
IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added,
and it is then used unchecked to index vif->link_conf[],
mvif->mt76.link[] and sta->link[], all of which hold
IEEE80211_MLD_MAX_NUM_LINKS (15) entries.
Clamp the primary link id to the default link before using it, and use
the clamped value for the link_sta fallback as well.
Fixes: 1609b014aa ("wifi: mt76: mt7996: Overwrite unspecified link_id in mt7996_tx()")
Link: https://patch.msgid.link/20260801145334.1166751-10-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76_vif_link() indexes mvif->link[] without validating link_id, but
callers pass mvif->deflink_id / msta->deflink_id, which hold
IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added.
Since IEEE80211_MLD_MAX_NUM_LINKS is 15, that reads one element past the
end of the array, aliasing mt76_vif_data.offchannel_link.
Reachable via mt7996_set_tsf()/mt7996_offset_tsf() and
mt7996_net_fill_forward_path(). Bounds check link_id and return NULL,
matching mt7996_sta_link() and mt7996_sta_link_protected().
Fixes: a9384b36a4 ("wifi: mt76: mt7996: rework set/get_tsf callabcks to support MLO")
Link: https://patch.msgid.link/20260801145334.1166751-9-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The PS queue filed redirected frames under the TID taken from the TXD,
while mac80211 was told about the TID taken from the QoS header, or TID 0
for anything that is not a QoS data frame. When the two disagree,
mt7603_release_buffered_frames() skips the frame because it does not
match the requested TIDs, so it stays in the PS queue until the station
wakes up. Buffered MMPDUs hit this whenever they were sent on a
non-zero TID.
Use one TID for both.
Link: https://patch.msgid.link/20260801145334.1166751-8-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Releasing buffered frames has to turn off the PSE redirect for the
station, otherwise the released frames are looped straight back into the
driver PS queue. Nothing ever turns it back on: mt7603_sta_ps() only runs
on an observed PM bit transition, and MT_WCID_FLAG_PS keeps mt76 from
reporting the same state twice. After the first service period the
hardware therefore treats a dozing station as awake and transmits at it
directly, which is where the retry storms and the packet loss reported
against U-APSD clients come from.
Re-arm hardware buffering from mt7603_mac_work() for every station that
is still known to be asleep, once the PSD queue has drained and the
released frames have passed the redirect stage. Frames that are still
queued belong to the service period that was just served, so unlike on a
sleep transition they must not be pulled back with mt7603_filter_tx().
Track the sleep state separately from the WTBL state, so a station that
wakes up while the re-arm is pending is not put back to sleep.
Link: https://patch.msgid.link/20260801145334.1166751-7-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7603_rx_loopback_skb() marks a TID as buffered when the hardware
redirects a frame into the driver PS queue, but nothing ever clears that
state again. mac80211 therefore keeps the TIM bit set for the station and
keeps routing every service period to the driver, which also prevents it
from releasing frames it has buffered itself.
Clear the buffered state for every requested TID that has no frames left
in the PS queue.
Link: https://patch.msgid.link/20260801145334.1166751-6-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Frames released from the driver PS queue were all tagged with MORE_DATA
and none of them ever carried the EOSP bit, so from the client's point of
view a U-APSD service period was started but never finished. Clients that
keep their receiver on until EOSP arrives stop sending trigger frames,
and all downlink traffic for that station stalls until they give up.
ieee80211_sta_eosp() only cleared the service period state inside
mac80211, which is why the mismatch went unnoticed.
Assign MORE_DATA per frame and set the wire EOSP bit on the last one. If
the last released frame is a bufferable MMPDU it has no QoS control field
to carry EOSP, so let mac80211 append a QoS-Null frame instead.
Also stop handing the remaining frame budget to
mt76_release_buffered_frames() once frames have been released from the PS
queue: both would signal the end of the same service period. Releasing
fewer frames than requested is allowed, and MORE_DATA tells the client to
trigger again.
Link: https://patch.msgid.link/20260801145334.1166751-5-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When the driver implements .release_buffered_frames, mac80211 leaves the
U-APSD signalling entirely to the driver: "In this case it is also
responsible for setting the EOSP flag in the QoS header of the frames"
(include/net/mac80211.h). Only IEEE80211_TX_STATUS_EOSP was being set,
which merely ends the service period inside mac80211, so on air the
service period was never terminated. Clients that wait for EOSP before
going back to doze keep the SP open and stop triggering, which stalls all
downlink traffic for that station.
Set the wire EOSP bit on the last frame of a U-APSD service period.
EOSP has no meaning for a PS-Poll response, so pass the release reason
down and leave those frames alone.
Link: https://patch.msgid.link/20260801145334.1166751-4-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add MT_DRV_HW_PS_BUFFERING flag for drivers where firmware controls
the TIM bit based on buffered frames. Instead of blocking all TX to
PS stations (which starves firmware and prevents TIM from being set),
allow limited frame delivery using AQL pending airtime as the
throttle. Replenish the firmware buffer on TX completion.
Add mt76_sta_ps_transition() helper for drivers to call from MCU
PS sync events.
Link: https://patch.msgid.link/20260801145334.1166751-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Per IEEE 802.11be, the Beamformee SS <= 80/160/320 MHz 3-bit subfields
in the EHT PHY Capabilities are encoded as (Nss - 1) and are required
to be >= 3 (i.e. at least 4 SS receive capability) whenever SU
Beamformee is advertised.
MT7925 is a 2x2 STA (sts = 2), so directly filling (sts - 1) = 1
violates the spec minimum. Clamp the encoded value to 3 when sts <= 3,
otherwise use (sts - 1). This is applied consistently to the
BEAMFORMEE_SS <= 80 MHz (split across phy_cap_info[0]/[1]), <= 160 MHz
and <= 320 MHz (6 GHz only) subfields.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: shengwei.lu <shengwei.lu@mediatek.com>
Link: https://patch.msgid.link/20260723031108.2017653-1-jb.tsai@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The event TLV loops accept a zero-length TLV, which advances neither the
cursor nor the remaining length, so a malformed event hangs the caller.
mt7925_mcu_uni_roc_event() additionally walked past the end of the skb,
since it never checked the declared length against the remainder.
Replace the five open-coded loops with a shared iterator that rejects
lengths below the TLV header and beyond the remaining buffer, and check
the per-tag payload sizes before dereferencing them.
While here, make the RSSI monitor event read from the current TLV rather
than from the start of the list.
Link: https://patch.msgid.link/20260727150434.1778520-15-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Changing the antenna configuration updates the stream capabilities but
left the per-path SKU power limits and path delta compensation stale
until the next channel switch. Reapply the SKU table like mt7996
already does.
Link: https://patch.msgid.link/20260727150434.1778520-13-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The firmware does not support individual TWT agreements with non-AP MLDs,
and the driver only tracks TWT flow state on the default link, which may
not be the link the agreement was negotiated on. Reject TWT setup
requests from MLD stations instead of programming an unsupported
configuration.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Link: https://patch.msgid.link/20260727150434.1778520-12-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Like deauth, a disassoc frame sent to a client in powersave mode can get
stuck in a tx queue along with other buffered frames, filling up hardware
queues with frames that are only released after the WTBL slot is reused
for another client.
Move disassoc packets to the ALTX queue, matching the existing deauth
handling.
Fixes: dedf2ec30f ("wifi: mt76: fix queue assignment for deauth packets")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Link: https://patch.msgid.link/20260727150434.1778520-11-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
status->chains was set from the antenna mask, which is derived from the
number of spatial streams, while the chain_signal array is filled from
all RCPI fields. On boards where the number of RX paths exceeds the
stream count, e.g. the 3T3R mt7916/mt7981 variant with 2 streams on the
5 GHz band, the RSSI of the extra chains was never reported.
Use the band local RX path chainmask instead.
Fixes: e57b790146 ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Link: https://patch.msgid.link/20260727150434.1778520-9-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
On single-adie mt7986 the only phy is bound to band 1, but its chainmask
is stored unshifted, because dev->chainshift is still zero while the
eeprom is parsed for the main phy. mt7915_set_antenna() on the other
hand shifts by chainshift * band_idx, so the representation of the
chainmask changed as soon as the antenna configuration was touched.
Until then, mt7915_mcu_set_chan_info() passed rx_path = 0 to the
firmware, since shifting the unshifted mask down clears all bits.
Keep the unshifted form for that case and add helpers for the band local
chainmask, so that only the band 1 phy of a dbdc device uses the shifted
form.
Fixes: 3eb50cc905 ("wifi: mt76: mt7915: rely on band_idx of mt76_phy")
Link: https://patch.msgid.link/20260727150434.1778520-8-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7996_mmio_wed_init() set dev->mt76.hwrro_mode and rx_token_size while
building the WED configuration, before knowing whether the WED attach
can succeed. A failed attach left the enlarged rx_token_size behind and
reset hwrro_mode to MT76_HWRRO_OFF, clobbering the values that another
RX datapath owner may have configured earlier in probe: on Airoha
platforms with the wed_enable module parameter set, this broke the NPU
offload configuration set up by mt76_npu_init() (NPU offload requires
HW-RRO and a larger rx token space, and the attach always fails there
since no SoC has both an Airoha NPU and MTK WED).
Move both assignments after a successful attach, next to the existing
success-only dma_dev/irq assignments. This is safe for the regular WED
attach case: the first consumer of either field runs after probe
continues (mtk_wed_device_attach() only invokes the init_buf callback;
rx buffers are allocated via init_rx_buf from mtk_wed_start(), long
after mt7996_mmio_wed_init() has returned).
Within the WED configuration the HW-RRO checks were constant: the mode
was assigned unconditionally right before them, and the hif2 path is
only reachable after a successful main attach has set it. Resolve them
to their constant values and drop the dead branches.
Fixes: 377aa17d2a ("wifi: mt76: mt7996: Add NPU offload support to MT7996 driver")
Link: https://patch.msgid.link/20260727150434.1778520-7-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
If the WED attach for the primary PCIe function fails, the probe path
still attached wed_hif2 for the secondary function, leaving the device
in an inconsistent half-WED configuration that crashes later. The hif2
call also re-enabled hwrro_mode, which the failed primary attach had
just turned off.
Skip the hif2 WED setup when the primary WED device is not active.
Fixes: 83eafc9251 ("wifi: mt76: mt7996: add wed tx support")
Link: https://patch.msgid.link/20260727150434.1778520-6-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When addr is less than the hardcoded threshold in __mt7996_reg_addr,
it indicates that remapping is unnecessary.
Currently, the flow remaps address 0x0 to MT_HIF_REMAP_BASE_L2,
which is incorrect.
To address this, modify __mt7996_reg_addr to return INVALID_REG_ADDR
if the address is not below the hardcoded value or is not present in
the mt7996_reg_map array.
Additionally, update the remap condition to check if addr is equal to
INVALID_REG_ADDR.
Fixes: 3687854d3e ("wifi: mt76: mt7996: add locking for accessing mapped registers")
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Link: https://patch.msgid.link/20260727150434.1778520-5-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The hif2 reference obtained by mt7915_pci_init_hif2() is only released on
error paths that key off dev->hif2, which is not assigned until after the
IRQ setup. If pci_alloc_irq_vectors() or the primary devm_request_irq()
fails, the reference leaks. Drop it explicitly on those paths via
mt7915_put_hif2().
Fixes: f68d67623d ("mt76: mt7915: add Wireless Ethernet Dispatch support")
Link: https://patch.msgid.link/20260727150434.1778520-4-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
After mt7915_register_ext_phy() succeeded, a failure of the main PHY
mt7915_init_debugfs() or mt7915_coredump_register() unwound through
free_phy2, which called ieee80211_free_hw() on the ext PHY hw while it
was still registered with mac80211, since mt76_unregister_device() only
unregisters the main hw. Unregister the ext PHY (thermal + phy + hw)
first and skip the redundant free.
Fixes: 7b8e1ae886 ("mt76: mt7915: rework hardware/phy initialization")
Link: https://patch.msgid.link/20260727150434.1778520-3-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7915_pci_init_hif2() was called unconditionally and again inside the
WED-inactive branch. The helper increments the global hif_idx, writes the
PCIe RECOG_ID register and takes a get_device() reference via
mt7915_pci_get_hif2(), while removal only drops one reference. On non-WED
dual-hif hardware this double-incremented hif_idx, wrote RECOG_ID twice and
leaked a device reference. Only the call inside the WED-inactive branch is
correct; drop the unconditional one. hif2 is already initialised to NULL.
Fixes: cacdd67812 ("mt76: mt7915: add mt7915_mmio_probe() as a common probing function")
Link: https://patch.msgid.link/20260727150434.1778520-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The MIB_TSCR0-7 counters read by mt7996_mac_update_stats() are
hardcoded at the mt7996/mt7992 offsets 0x6b0-0x6d0, but mt7990 moved
them to 0x750-0x770, so TX AMPDU statistics were read from unrelated
registers on that chip. Move the offsets into the per-chip register
tables.
Fixes: f6c87411d1 ("wifi: mt76: mt7996: rework register mapping for mt7990")
Link: https://patch.msgid.link/20260727150434.1778520-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7996_remove_interface() destroys the remaining vif links, clearing
omac_mask, vif_mask and mld_idx_mask, with only the wiphy mutex held.
Those masks are modified under dev->mutex everywhere else, so the
unlocked clears can race the scan-link teardown and the reset work
and lose updates.
Take dev->mutex around the link destroy loop, matching
mt7996_add_interface() and mt7915_remove_interface(). The mutex is
released before mt76_vif_cleanup(), which aborts a pending scan and
takes the mutex itself.
Signed-off-by: Chad Monroe <chad@monroe.io>
Link: https://patch.msgid.link/20260724124813.3961474-29-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The offchannel scan link is allocated in mt76_hw_scan() under
dev->mutex, but torn down without it: mt76_scan_complete() runs from
mt76_scan_work() on the mac80211 workqueue, or from mt76_abort_scan(),
and calls mt76_put_vif_phy_link(), whose vif_link_remove clears the
per-phy omac_mask and the device-wide vif_mask/mld_idx_mask with plain
read-modify-write. A vif link add or remove for another interface,
running concurrently under dev->mutex, can interleave with these
unlocked writes and lose an update: a cleared bit belonging to a live
link gets handed out again (two links sharing an omac/bss/wcid index,
breaking own-MAC unicast RX for the first one), or a freed bit stays
set until reboot and eventually exhausts the index space.
Take dev->mutex around the scan completion, mirroring the ROC teardown
in mt76_roc_complete_work()/mt76_abort_roc(), and switch the channel
restore to __mt76_set_channel() since the caller now holds the lock.
mt76_abort_scan() keeps cancelling the scan work before taking the
mutex, so the work-vs-abort ordering is unchanged.
Signed-off-by: Chad Monroe <chad@monroe.io>
Link: https://patch.msgid.link/20260724124813.3961474-28-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The scan state bit is cleared by mt76_scan_complete(), but nothing ever
sets it: mt76_sw_scan() is only called for drivers without hw scan
support. As a result, all MT76_SCANNING checks are inert for drivers
using mt76_hw_scan(), including the DFS state handling in
mt76_phy_dfs_state() and the guard against manually triggered radar
detection while scanning.
Set the bit when the scan request is accepted. Since every channel
programmed while scanning now evaluates the DFS state as disabled and
stops the radar detector, re-program the operating channel at scan
completion regardless of the off-channel state, after the scanning bit
has been cleared. Otherwise a scan whose last visited channel was the
operating channel, or one that returned to it early because of
associated stations, would leave radar detection stopped until the
next channel switch.
Fixes: 31083e3854 ("wifi: mt76: add code for emulating hardware scanning")
Link: https://patch.msgid.link/20260724124813.3961474-27-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
After a full chip reset, mac80211 reconfig replays interface, link and
channel context setup. mt7996_vif_link_add() short-circuits when the
link_id is still marked in mvif->valid_links, a state introduced for
postponing link teardown to interface removal. The reset path frees the
link structures without clearing those bits, so the replayed setup never
re-creates dev_info/bss_info/STA records in the restarted firmware and
never re-registers the link wcid, leaving the device inoperative.
The reset path also leaks every allocated MLD index: per-link indices
and the per-vif group/remap indices are re-allocated from scratch during
reconfig, but the old bits stay set in the masks, so repeated full
resets exhaust the index space.
Clear valid_links in the reset vif iterator and reset the MLD index
masks alongside the existing omac_mask clearing.
Fixes: ace5d3b6b4 ("wifi: mt76: mt7996: improve hardware restart reliability")
Fixes: 08813703ac ("wifi: mt76: mt7996: Destroy vif active links in mt7996_remove_interface()")
Link: https://patch.msgid.link/20260724124813.3961474-26-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7996_mac_reset_vif_iter() queues non-default vif links for kfree_rcu
while dev->wcid[] still holds pointers to the wcid embedded in each
freed link; mt76_reset_device() then dereferences those entries and
runs mt76_wcid_cleanup() on them. If a grace period elapses in between,
the cleanup operates on freed memory.
Run mt76_reset_device() first, so the wcid entries are cleaned up and
cleared while the links are still valid.
Fixes: ace5d3b6b4 ("wifi: mt76: mt7996: improve hardware restart reliability")
Link: https://patch.msgid.link/20260724124813.3961474-25-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
WM firmware can enter a partial failure state where RX is hung.
Detect this condition by monitoring SER_PLE_ERR_1 for MDP_RIOC_HANG_ERR
and trigger L1 SER to restore operation. Use transition detection on the
error bit to fire only once per new occurrence, preventing an infinite
SER loop when the bit remains set across checks.
Signed-off-by: Chad Monroe <chad@monroe.io>
Suggested-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/20260724124813.3961474-24-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7615_tx() falls back to the vif BSS wcid when mac80211 hands a frame
over without a station, e.g. while a station is being torn down, and to
the global wcid when there is no vif either. Both tx_prepare_skb
implementations derive a mt7615_sta from that wcid unconditionally and,
if the rate control probe flag is set, pass it to mt7615_mac_set_rates(),
which dereferences the NULL vif backpointer of the per-vif embedded sta:
Unable to handle kernel read from unreadable memory at virtual
address 0000000000000002
...
pc : mt7615_mac_set_rates
lr : mt7615_tx_prepare_skb
Neither entry is rate controlled by mac80211: the embedded sta has an
empty rate set, and for the global wcid the container_of does not yield a
valid mt7615_sta at all. Only resolve the sta for wcids that belong to a
station.
Reported-by: Chad Monroe <chad@monroe.io>
Link: https://patch.msgid.link/20260724124813.3961474-23-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When a firmware watchdog triggers full SER recovery before any VAPs
are up, mac80211 skips drv_reconfig_complete() because open_count is
zero. This leaves the DRIVER queue stop reason set permanently,
blocking all TX when interfaces eventually start.
Signed-off-by: Chad Monroe <chad@monroe.io>
Link: https://patch.msgid.link/20260724124813.3961474-22-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The net_setup_tc callback is chosen at compile time and the WED
handler shadows the NPU one when CONFIG_NET_MEDIATEK_SOC_WED is
enabled. mt76_wed_net_setup_tc() returns -EOPNOTSUPP without an
active WED device, so on boards using the Airoha NPU with a WED
enabled kernel the tc offload block is never bound and PPE flow
offload for wireless traffic is silently disabled.
Dispatch on the active offload backend instead: use the WED handler
when a WED device is attached and fall back to the NPU handler
otherwise. Builds without MT76_NPU keep the old behavior through the
mt76_npu_net_setup_tc() stub.
Signed-off-by: Chad Monroe <chad@monroe.io>
Link: https://patch.msgid.link/20260724124813.3961474-21-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Move the offload specific parts of Q_READ/Q_WRITE into
mt76_dma_handle_read/write, which return false to fall back to
readl/writel. The WED and NPU #ifdefs now live inside those helpers
instead of selecting between mutually exclusive macro definitions, so a
kernel with both enabled supports both at runtime.
Also fixes the NPU path dereferencing a hardcoded q instead of the macro
argument.
Link: https://patch.msgid.link/20260724124813.3961474-20-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The L1 reset path calls mt76_abort_scan() between setting MT76_MCU_RESET
and waking mcu.wait. A scan work blocked on an in-flight MCU command
does not re-evaluate its wait condition until woken, so the
cancel_delayed_work_sync() inside the abort sleeps out the full MCU
timeout before recovery can proceed, adding several seconds of SER
latency. mt7996_mac_full_reset() and the mt7915 counterpart already
order the wake-up first.
Wake mcu.wait immediately after setting MT76_MCU_RESET so in-flight
commands bail out before the abort synchronises against them.
Fixes: b36d556102 ("wifi: mt76: abort scan/roc on hw restart")
Link: https://patch.msgid.link/20260724124813.3961474-19-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
No hw keys are ever uploaded for scanning/roc links and the link remove
path already skips the key iteration for them. The add path still runs
it, and since mt7996_set_hw_key() resolves the target through
mvif->link[link_id] rather than the offchannel link, starting a scan on
another band re-uploads the group keys of the link sharing the same
link_id, re-sending its BSS cipher info and, for BIGTK with beacon
protection on an AP link, toggling its beacons off and on.
Skip the key iteration for offchannel links, mirroring the remove path.
Fixes: 69d54ce749 ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Link: https://patch.msgid.link/20260724124813.3961474-18-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The flow is added to dev->twt_list before sending the agreement to the
firmware, but the error path leaves it linked while flowid_mask is
never set. The flow slot can then be reused and memset while still on
the list, corrupting twt_list, and station removal leaves a dangling
entry behind that mt7915_mac_twt_sched_list_add() later walks.
Fixes: 3782b69d03 ("mt76: mt7915: introduce mt7915_mac_add_twt_setup routine")
Link: https://patch.msgid.link/20260724124813.3961474-17-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Because 4 address non-AMSDU packets do not have a bssid field, the
hardware cannot get the bssid. Without the bssid, stations are not
able to leave PS mode due to HW design. Wake up non-setup links when
4-address mode is established to prevent this issue.
mt7992 and mt7990 handle this via the BSSID mapping band config
instead, so restrict the command to mt7996.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Link: https://patch.msgid.link/20260724124813.3961474-16-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When receiving a 4 address non-AMSDU packet, there is no bssid in the
address fields, which breaks powersave handling for 4-address peers.
Set the mcu command to use A1 as bssid when receiving 4 address
non-AMSDU packets on mt7992 and mt7990.
Also skip mt7996_mac_init_band() for invalid bands, so the command is
only sent for bands that actually exist on the device.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Link: https://patch.msgid.link/20260724124813.3961474-15-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The RX path is handled by the WO MCU only on WED v2 hardware. On WED
v3 the same buf1 bit does not carry drop information, so evaluating it
there causes spurious RX drops.
Fixes: e4d2b8bcac ("wifi: mt76: drop the incorrect scatter and gather frame")
Link: https://patch.msgid.link/20260724124813.3961474-14-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
train_up_high_thres, train_up_rule_rssi and low_traffic_thres were
declared as host-native short in a firmware-facing TLV and assigned
host-order constants, so on a big-endian host the firmware received
byte-swapped rate-adaptation thresholds. Declare them __le16 and convert
with cpu_to_le16().
Fixes: e57b790146 ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Link: https://patch.msgid.link/20260724124813.3961474-12-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The RX rate decoder set status->nss straight from the PRXV NSTS field,
which for STBC frames is twice the data spatial-stream count. cfg80211
then reported a doubled RX bitrate in station dumps and radiotap. Halve
nss for STBC, matching the TX status path.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Fixes: d832f5e738 ("mt76: connac: move mt76_connac2_mac_fill_rx_rate in connac module")
Link: https://patch.msgid.link/20260724124813.3961474-11-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Both drivers cancelled dump_work on unregister but left reset_work and
rc_work to be flushed only by destroy_workqueue() in mt76_free_device(),
which runs after the hw is unregistered and the hardware stopped. A
reset_work that fires in that window calls ieee80211_restart_hw() and
re-arms mac_work on an unregistered hw, and rc_work touches station state
being torn down. Cancel both up front, alongside dump_work.
Fixes: e57b790146 ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Link: https://patch.msgid.link/20260724124813.3961474-10-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
