Couple of already merged SoCs(like sc7280, sm8750, kaanapali etc.)
describe ICE as single clock historically which are recently updated
with mandatory 2 clocks.
Keep only the known legacy compatibles flexible, and make strict
validation default(of power-domains and 2 clocks) for all other Soc
compatibles.
This ensures old DTs are valid while ensuring any new SoC (like hawi,
milos, eliza, nord, maili or any upcoming ones) must follow latest
requirements by default.
Signed-off-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
kmb_ocs_aes_probe() requests the device IRQ before initializing
irq_completion. Once the handler is registered it can run immediately,
and ocs_aes_irq_handler() unconditionally calls complete(). An
interrupt in this window would therefore use an uninitialized
completion.
Initialize the completion before requesting the IRQ, as the sibling
OCS HCU and ECC drivers already do.
Fixes: 8857433245 ("crypto: keembay - Add support for Keem Bay OCS AES/SM4")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Kconfig symbol and associated seem to be badly named as they have
nothing OMAP specific but instead refer to Inside Secure Safexcel
devices which have been used in many SoCs from different
manufacturers (like OMAP, Marvell but also eg. Renesas).
The Renesas RZ/N1D features this IP, so add this architecture to the
dependency allow list. In practice this dependency list does not seem
very relevant and could be entirely dropped, given the fact that this IP
has been implemented by many different vendors and seems to be
architecture agnostic.
Signed-off-by: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Be a little more precise in the title by giving the family name and the
own name of the hardware block. Despite the original compatibles, this
file describes a SafeXcel EIP-76 hardware random number generator.
Signed-off-by: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
platform_get_irq() returns a positive IRQ number on success and a negative
error code on failure. aspeed_acry_probe() and aspeed_hace_probe()
already detect negative returns, but both convert every failure to -ENXIO.
Return the original error code so callers can handle errors such as
-EPROBE_DEFER correctly.
Fixes: 2f1cf4e50c ("crypto: aspeed - Add ACRY RSA driver")
Fixes: 70513e1d65 ("crypto: aspeed - Fix check for platform_get_irq() errors")
Signed-off-by: Narasimharao Vadlamudi <ahmisaranrao@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit 55b48e23f5 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() and dev_err_probe() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sg_dma_len() is only valid after mapping the scatterlist with
dma_map_sg(). However, sl3516_ce_need_fallback() checks it before the
source and destination scatterlists are mapped. Thus, a stale DMA length
that is not a multiple of 16 could incorrectly force a software fallback
when CONFIG_NEED_SG_DMA_LENGTH=y.
Remove the invalid checks; the existing scatterlist length checks are
sufficient.
Fixes: 46c5338db7 ("crypto: sl3516 - Add sl3516 crypto engine")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Clear ->do_fallback before decoding a new ECDH secret and enable it only
after the software fallback accepts a caller-provided private key. This
avoids using a stale fallback key should crypto_kpp_set_secret() fail.
Fixes: 11105693fa ("crypto: atmel-ecc - introduce Microchip / Atmel ECC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In atmel_sha204a_rng_read(), use memzero_explicit() to clear the local
stack variable cmd before it goes out of scope, since cmd.data may still
hold the last 32 random bytes.
Since atmel_sha204a_rng_done() caches work_data in hwrng::priv, and its
response data is later used as RNG entropy, use kfree_sensitive() to
clear the cached data on transaction failure and device removal.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The call site already checks dd->flags & TDES_FLAGS_DMA before calling
atmel_tdes_crypt_dma_stop(). Remove the redundant check, return early on
error, and drop the now-obsolete return variable.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In atmel_tdes_crypt_pdc_stop(), remove the redundant return variable and
return the error directly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fold all fast path conditions into a single boolean expression and drop
any redundant checks.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add "xts(camellia)", "xts(serpent)", and "xts(twofish)" to the allowlist
for af_alg_restrict=1. These niche AES alternatives have continued to
see rare but persistent use via cryptsetup, which has historically
relied on the AF_ALG support for these ciphers in XTS mode for
performing the keyslot encryption. (cryptsetup v2.8.7 and later fall
back to a temporary dm-crypt mapping, but that requires root.)
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use strscpy_pad() to copy buf and zero-pad any trailing bytes instead of
zero-initializing the local services buffer and then using strscpy() to
copy into it. Also use the strscpy_pad() return value to detect string
truncation instead of checking the caller-provided length.
Remove the now-unused length parameters from
adf_service_string_to_mask() and adf_parse_service_string(). Also remove
the redundant strnlen() call in adf_get_service_mask(), which only
computed the removed length argument.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ks_sa_rng_probe() enables runtime PM and resumes the device before
registering the hwrng. If devm_hwrng_register() fails, probe returns
without dropping the runtime PM usage count or disabling runtime PM.
Unwind the runtime PM state on the registration failure path, matching
the cleanup done by remove().
Fixes: eb428ee0e3 ("hwrng: ks-sa - add hw_random driver")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the DT bindings for inline-crypto engine to require the UFS_PHY_GDSC
power-domain and iface clock on Qualcomm Hawi platform.
Fixes: d273b258d8 ("dt-bindings: crypto: qcom,inline-crypto-engine: Document Hawi ICE")
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Inline Crypto Engine found on Maili SoC is compatible with the common
baseline IP 'qcom,inline-crypto-engine' and requires the UFS_PHY_GDSC
power-domain and iface clock. Hence, document the compatible as such.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
allocated pages in _init_ext_path are never freed and sev_init_ex_buffer
is left pointing at the leaked memory in case of any failures during the
function..
Fix by adding an error path that frees the pages and clears
sev_init_ex_buffer. Make sure we only free the memory if the failure
happens before the conversion. Otherwise, we may end up trying to free
up converted pages in case of reclaim failure. rmp_mark_pages_firmware
failures should be rare enough to avoid more code complexity to track
down which pages were reclaimed/leaked vs which are not.
Fixes: 7364a6fbca ("crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Atish Patra <atishp@meta.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
__sev_platform_init_handle_init_ex_path() calls
rmp_mark_pages_firmware() with locked=false while the parent
function of init_ex_path already acquired the sev_cmd_mutex.
In the case of an RMPUPDATE failure for any page after the first, the cleanup
path would invoke reclaim pages which would result in a deadlock in
sev_do_cmd.
Pass locked=true to honor the lock status of the parent function.
Fixes: 7364a6fbca ("crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled")
Reported-by: Chris Mason <clm@meta.com>
Assisted-by: Claude:claude-opus-4-6
Fixes: 7364a6fbca ("crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled")
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Atish Patra <atishp@meta.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
register_aes_algs() registers the AEAD algorithms before registering the
skcipher algorithms. If skcipher registration fails, the function unwinds
the earlier AEAD registration with crypto_engine_unregister_aeads(), but it
passes ARRAY_SIZE(algs), which is the skcipher table size.
Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper
iterates over the same table that was registered. Also clarify the nearby
comment: the crypto registration helpers clean up algorithms registered
within the same call, while this function must still unwind earlier
successful registration steps.
Fixes: 8857433245 ("crypto: keembay - Add support for Keem Bay OCS AES/SM4")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
rk_hash_run() waits for RK_CRYPTO_HASH_STS to become idle after the
final DMA transfer, but ignores the poll result. If the hash engine
never becomes idle, the driver still reads the digest registers and
finalizes the request with the previous success value.
Store the poll result and finalize the request with the timeout error
before reading the digest registers.
Fixes: 37bc22159c ("crypto: rockchip - use read_poll_timeout")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
omap_rng_probe() enables runtime PM before acquiring and enabling the
functional clocks. Several later error paths returned or unwound without
undoing all state acquired so far.
If pm_runtime_resume_and_get() failed, the driver returned through the
generic ioremap error label and left runtime PM enabled. If either clock
lookup returned -EPROBE_DEFER, the function returned directly and skipped
the runtime PM cleanup; the register clock defer path could also leave the
already enabled functional clock prepared.
Route these failures through the existing unwind labels so each path only
undoes resources that were acquired successfully. Keep the resume failure
path limited to pm_runtime_disable(), and use the later labels only after
the runtime PM usage count or clocks have been acquired.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 61dc0a446e ("hwrng: omap - Fix assumption that runtime_get_sync will always succeed")
Fixes: 43ec540e6f ("hwrng: omap - move clock related code to omap_rng_probe()")
Fixes: b166be0044 ("hwrng: omap - Fix clock resource by adding a register clock")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
xtrng_readblock32() polls for 16-byte chunks but returns the number of
bytes read even when the first poll times out. Its caller then treats a
zero return as a short successful read, and partial reads for full
32-byte blocks can make the tail copy use a fixed block offset rather
than the amount already produced.
Return the poll error when no data has been read, preserve partial
positive returns after some data is available, stop the generator on all
collection exits, and append tail bytes at the current output count.
Fixes: 8979744aca ("crypto: xilinx - Add TRNG driver for Versal")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
AF_ALG is a frequent source of vulnerabilities and a maintenance
nightmare. It exposes far more functionality to userspace than ever
should have been exposed, especially to unprivileged processes. Recent
exploits have targeted kernel internal implementation details like
"authencesn" that have zero use case for userspace access.
Fortunately, AF_ALG is rarely used in practice, as userspace crypto
libraries exist. And when it is used, only some functionality is known
to be used, and many users are known to hold capabilities already.
iwd for example requires CAP_NET_ADMIN and has a known algorithm list
(https://lore.kernel.org/linux-crypto/bcbbef00-5881-421b-8892-7be6c04b832d@gmail.com/).
Thus, let's restrict the set of allowed algorithms by default, depending
on the capabilities held.
Add a sysctl /proc/sys/crypto/af_alg_restrict with meaning:
0: unrestricted
1: limited functionality
2: completely disabled
Set the default value to 1, which enables an algorithm allowlist for
unprivileged processes and a slightly longer allowlist for privileged
processes.
Note that the list may be tweaked in the future. However, the common
use cases such as iwd and bluez are taken into account already. I've
tested that iwd still works with the default value of 1.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove algorithms that are either unsafe or deprecated and have no
in-kernel users that cannot be served by the ARM CE implementations.
AES-ECB reveals plaintext patterns (identical plaintext blocks produce
identical ciphertext blocks) and should not be exposed as a hardware-
accelerated primitive. DES, Triple DES and HMAC-SHA1 have been
deprecated for years.
Remove sha1, ecb(aes), ecb(des), cbc(des), ecb(des3_ede), cbc(des3_ede),
hmac(sha1) and all AEAD variants built on these primitives as well as
authenc(hmac(sha256),cbc(des)). Also clean up the - now dead - code,
flags and constants.
Cc: stable@vger.kernel.org
Acked-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
mxs_dcp_aes_block_crypt() uses sg_dma_len() without mapping the source
scatterlist with dma_map_sg() first. Therefore, sg_dma_len() is invalid
and could return zero or a stale DMA length, causing encryption and
decryption to process the wrong number of bytes when
CONFIG_NEED_SG_DMA_LENGTH=y.
Use the original scatterlist length instead.
Fixes: 15b59e7c37 ("crypto: mxs - Add Freescale MXS DCP driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sa_ul_probe() calls sa_init_mem() to create the DMA pool used for
security context buffers, but ignores its return value. If pool creation
fails, probe still continues with DMA setup, algorithm registration and
child population even though later request setup depends on that pool.
Stop probing when sa_init_mem() fails, and route that failure to the PM
cleanup path without attempting to destroy an uncreated DMA pool.
Fixes: 7694b6ca64 ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the CAAM
support which is one of the only remaining ones.
Note that the CAAM support for hwrng remains in place. That is the
interface that actually matters.
Note that this code also had several issues, including dlen > 65535
causing corruption of the CAAM descriptor.
Cc: Gaurav Jain <gaurav.jain@nxp.com>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ss support which is one of the only remaining ones.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. Also, it had a buffer
overread bug in the line 'memcpy(ctx->seed, d + dlen, ctx->slen);'.
There's no point in fixing these bugs separately only to remove the code
anyway, so this commit is marked with Fixes and Cc stable.
Fixes: ac2614d721 ("crypto: sun8i-ss - Add support for the PRNG")
Cc: stable@vger.kernel.org
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ce support which is one of the only remaining ones.
Note that the sun8i-ce support for hwrng remains in place. That is the
interface that actually matters.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. There's no point in fixing
this separately only to remove the code anyway, so this commit is marked
with Fixes and Cc stable.
Fixes: 5eb7e94688 ("crypto: sun8i-ce - Add support for the PRNG")
Cc: stable@vger.kernel.org
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SEV-SNP firmware provides the SNP_VERIFY_MITIGATION command, which
can be used to query the status of currently supported vulnerability
mitigations and to initiate mitigations within the firmware.
This command is an explicit mechanism to ascertain if a firmware
mitigation is applied without needing a full RMP re-build, which is most
useful in a live firmware update scenario.
The firmware supports two subcommands: STATUS and VERIFY. The STATUS
subcommand is used to query the supported and verified mitigation bits.
The VERIFY subcommand initiates the mitigation process within the FW for
the specified vulnerability. Expose a userspace interface under:
/sys/firmware/sev/vulnerabilities/
- supported_mitigations (read-only): supported mitigation vector mask
- verified_mitigations (read/write): current verified mask; write a
vector to request VERIFY for that bit
The behavior of SNP_VERIFY_MITIGATION and the pre-requisites for using
it are bug-specific. Information about supported mitigations and its
corresponding vector is to be published as part of the AMD Security
Bulletin.
See SEV-SNP Firmware ABI specifications 1.58, SNP_VERIFY_MITIGATION for
more details.
Reviewed-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit df12ef60c8 ("crypto: qce/sha - Do not modify scatterlist passed
along with request") removed the only use of sg_last, rendering the
scatterlist traversal useless. Remove it and its local variables.
Also remove the redundant hash_later check, inline the source offset,
and assign the number of complete blocks directly to req->nbytes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There's no need for devm_platform_ioremap_resource() to be so far down.
In fact, putting it up allows direct return instead of having to goto
some branch. Also, remove the error message as the function complains
loudly itself. No need to duplicate.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The nonblocking RNG path allocates a work_data structure to track the
state of an in-flight asynchronous I2C request. This pointer is stored
in rng->priv and later consumed by the read path once the transaction
completes.
If the underlying I2C transfer fails, the completion callback is invoked
with a non-zero status. In this case, the allocated work_data is not
usable for producing RNG output and must not remain associated with the
hwrng state.
Previously, the failure path only logged a warning but left the pointer
state uncleared, which can result in subsequent read attempts observing
stale state and interpreting it as valid completion data.
Fix this by freeing the pending work_data. The I2C transaction reports
an error. This ensures that failed requests do not leave residual state
behind that could be interpreted as valid RNG data on later reads.
Clearing rng->priv is done at the subsequent call to nonblocking read.
Fixes: da001fb651 ("crypto: atmel-i2c - add support for SHA204A random number generator")
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Assisted-by: Gemini:1.5 Pro [google]
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardware ECDH path in atmel_ecdh_compute_shared_secret() uses the
private key stored in the device. However, the public key is cached only
after atmel_ecdh_set_secret() successfully generated that private key
for the current tfm.
atmel_ecdh_generate_public_key() already rejects requests when no public
key is cached. Add the same check to atmel_ecdh_compute_shared_secret()
to prevent the device from using a private key that was not generated
for the current tfm.
Fixes: 11105693fa ("crypto: atmel-ecc - introduce Microchip / Atmel ECC driver")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using sg_dma_len() is only valid after mapping the scatterlist with
dma_map_sg(). However, atmel_tdes_crypt_start() uses it before mapping
to compare input/output lengths and to compute the transfer count.
Use the original scatterlist lengths before DMA mapping to avoid reading
stale or uninitialized DMA lengths when CONFIG_NEED_SG_DMA_LENGTH=y.
Drop the output scatterlist length in the fast path since it is equal to
->in_sg->length and does not change the transfer count.
Fixes: 13802005d8 ("crypto: atmel - add Atmel DES/TDES driver")
Fixes: 1f858040c2 ("crypto: atmel-tdes - add support for latest release of the IP (0x700)")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Improve the kerneldoc for struct atmel_ecdh_ctx by removing the stale
"unsupported curves" wording, since the device only supports a single
curve (P-256), and move the set_secret() constraint to the description.
In atmel_ecdh_set_secret(), clarify that the device generates the
private key, and drop the redundant "only supports NIST P256" comment.
In atmel_ecdh_done() and atmel_ecdh_generate_public_key(), clarify the
truncation comments. Also note that a P-256 public key consists of two
32-byte coordinates in atmel_ecdh_compute_shared_secret(), and remove
the unnecessary fall-through comment and other redundant comments.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
