HWS has two types of APIs:
- Native: fastest and slimmest, async API.
The user of this API is required to manage rule handles memory,
and to poll for completion for each rule.
- BWC: backward compatible API, similar semantics to SWS API.
This layer is implemented above native API and it does all
the work for the user, so that it is easy to switch between
SWS and HWS.
Right now the existing users of HWS require only BWC API.
Therefore, in order to not waste resources, this patch disables
send queues allocation for native API.
If in the future support for faster HWS rule insertion will be required
(such as for Connection Tracking), native queues can be enabled.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Itamar Gozlan <igozlan@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241219175841.1094544-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor fc_pool API to create generic fs_pool API, as HW steering has
more flow steering elements which can take advantage of the same pool of
bulks API. Change fs_counters code to use the fs_pool API.
Note, removed __counted_by from struct mlx5_fc_bulk as bulk_len is now
inner struct member. It will be added back once __counted_by can support
inner struct members.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241219175841.1094544-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently mlx5_flow_destination includes counter_id which is assigned in
case we use flow counter on the flow steering rule. However, counter_id
is not enough data in case of using HW Steering. Thus, have mlx5_fc
object as part of mlx5_flow_destination instead of counter_id and assign
it where needed.
In case counter_id is received from user space, create a local counter
object to represent it.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241219175841.1094544-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New multi-host NICs provide each host with partial ports,
allowing each host to maintain its unique LAG configuration.
On these multi-host NICs, the 'native_port_num' capability
is no longer continuous on each host and can exceed the
'num_lag_ports' capability. Therefore, it is necessary to
skip the PFs with ldev->pf[i].dev == NULL when querying/modifying
the lag devices' information.
There is no need to check dev.native_port_num against ldev->ports.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241219175841.1094544-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Divya Koppera says:
====================
Add rds ptp library for Microchip phys
Adds support for rds ptp library in Microchip phys, where rds is internal
code name for ptp IP or hardware. This library will be re-used in
Microchip phys where same ptp hardware is used. Register base addresses
and mmd may changes, due to which base addresses and mmd is made variable
in this library.
====================
Link: https://patch.msgid.link/20241219123311.30213-1-divya.koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Attempt to enqueue a child after the queue was flushed, but before
SOCK_DONE flag has been set.
Test tries to produce a memory leak, kmemleak should be employed. Dealing
with a race condition, test by its very nature may lead to a false
negative.
Fixed by commit d7b0ff5a86 ("virtio/vsock: Fix accept_queue memory
leak").
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20241219-test-vsock-leaks-v4-5-a416e554d9d7@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Corrected the netlink message size calculation for multicast group
join/leave notifications. The previous calculation did not account for
the inclusion of both IPv4/IPv6 addresses and ifa_cacheinfo in the
payload. This fix ensures that the allocated message size is
sufficient to hold all necessary information.
This patch also includes the following improvements:
* Uses GFP_KERNEL instead of GFP_ATOMIC when holding the RTNL mutex.
* Uses nla_total_size(sizeof(struct in6_addr)) instead of
nla_total_size(16).
* Removes unnecessary EXPORT_SYMBOL().
Fixes: 2c2b61d213 ("netlink: add IGMP/MLD join/leave notifications")
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Link: https://patch.msgid.link/20241221100007.1910089-1-yuyanghuang@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I was debugging some netdev refcount issues in OpenOnload, and one
of the places I was looking at was in the sfc driver. Only
struct efx_async_filter_insertion was not using netdev refcount tracker,
so add it here. GFP_ATOMIC because this code path is called by
ndo_rx_flow_steer which holds RCU.
This patch should be a no-op if !CONFIG_NET_DEV_REFCNT_TRACKER
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241219173004.2615655-1-zhuyifei@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Radu Rendec says:
====================
net/bridge: Add skb drop reasons to the most common drop points
The bridge input code may drop frames for various reasons and at various
points in the ingress handling logic. Currently kfree_skb() is used
everywhere, and therefore no drop reason is specified. Add drop reasons
to the most common drop points.
The purpose of this series is to address the most common drop points on
the bridge ingress path. It does not exhaustively add drop reasons to
the entire bridge code. The intention here is to incrementally add drop
reasons to the rest of the bridge code in follow up patches.
Most of the skb drop points that are addressed in this series can be
easily tested by sending crafted packets. The diagram below shows a
simple test configuration, and some examples using `packit`(*) are
also included. The bridge is set up with STP disabled.
(*) https://github.com/resurrecting-open-source-projects/packit
The following changes were *not* tested:
* SKB_DROP_REASON_NOMEM in br_flood(). It's not easy to trigger an OOM
condition for testing purposes, while everything else works correctly.
* All drop reasons in br_multicast_flood(). I could not find an easy way
to make a crafted packet get there.
* SKB_DROP_REASON_BRIDGE_INGRESS_STP_STATE in br_handle_frame_finish()
when the port state is BR_STATE_DISABLED, because in that case the
frame is already dropped in the switch/case block at the end of
br_handle_frame().
+-------+
| br0 |
+---+---+
|
+---+---+ veth pair +-------+
| veth0 +-------------+ xeth0 |
+-------+ +-------+
SKB_DROP_REASON_MAC_INVALID_SOURCE - br_handle_frame()
packit -t UDP -s 192.168.0.1 -d 192.168.0.2 -S 8000 -D 8000 \
-e 01:22:33:44:55:66 -E aa:bb:cc:dd:ee:ff -c 1 \
-p '0x de ad be ef' -i xeth0
SKB_DROP_REASON_MAC_IEEE_MAC_CONTROL - br_handle_frame()
packit -t UDP -s 192.168.0.1 -d 192.168.0.2 -S 8000 -D 8000 \
-e 02:22:33:44:55:66 -E 01:80:c2:00:00:01 -c 1 \
-p '0x de ad be ef' -i xeth0
SKB_DROP_REASON_BRIDGE_INGRESS_STP_STATE - br_handle_frame()
bridge link set dev veth0 state 0 # disabled
packit -t UDP -s 192.168.0.1 -d 192.168.0.2 -S 8000 -D 8000 \
-e 02:22:33:44:55:66 -E aa:bb:cc:dd:ee:ff -c 1 \
-p '0x de ad be ef' -i xeth0
SKB_DROP_REASON_BRIDGE_INGRESS_STP_STATE - br_handle_frame_finish()
bridge link set dev veth0 state 2 # learning
packit -t UDP -s 192.168.0.1 -d 192.168.0.2 -S 8000 -D 8000 \
-e 02:22:33:44:55:66 -E aa:bb:cc:dd:ee:ff -c 1 \
-p '0x de ad be ef' -i xeth0
SKB_DROP_REASON_NO_TX_TARGET - br_flood()
packit -t UDP -s 192.168.0.1 -d 192.168.0.2 -S 8000 -D 8000 \
-e 02:22:33:44:55:66 -E aa:bb:cc:dd:ee:ff -c 1 \
-p '0x de ad be ef' -i xeth0
====================
Link: https://patch.msgid.link/20241219163606.717758-1-rrendec@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bridge input code may drop frames for various reasons and at various
points in the ingress handling logic. Currently kfree_skb() is used
everywhere, and therefore no drop reason is specified. Add drop reasons
to the most common drop points.
Drop reasons are not added exhaustively to the entire bridge code. The
intention is to incrementally add drop reasons to the rest of the bridge
code in follow up patches.
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241219163606.717758-3-rrendec@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SKB_DROP_REASON_VXLAN_NO_REMOTE skb drop reason was introduced in
the specific context of vxlan. As it turns out, there are similar cases
when a packet needs to be dropped in other parts of the network stack,
such as the bridge module.
Rename SKB_DROP_REASON_VXLAN_NO_REMOTE and give it a more generic name,
so that it can be used in other parts of the network stack. This is not
a functional change, and the numeric value of the drop reason even
remains unchanged.
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241219163606.717758-2-rrendec@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set NETIF_F_GSO_UDP_L4 bit of hw_features and features because i.MX95
enetc and LS1028A driver implements UDP segmentation.
- i.MX95 ENETC supports UDP segmentation via LSO.
- LS1028A ENETC supports UDP segmentation since the commit 3d5b459ba0
("net: tso: add UDP segmentation support").
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20241219054755.1615626-5-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ENETC rev 4.1 supports large send offload (LSO), segmenting large TCP
and UDP transmit units into multiple Ethernet frames. To support LSO,
software needs to fill some auxiliary information in Tx BD, such as LSO
header length, frame length, LSO maximum segment size, etc.
At 1Gbps link rate, TCP segmentation was tested using iperf3, and the
CPU performance before and after applying the patch was compared through
the top command. It can be seen that LSO saves a significant amount of
CPU cycles compared to software TSO.
Before applying the patch:
%Cpu(s): 0.1 us, 4.1 sy, 0.0 ni, 85.7 id, 0.0 wa, 0.5 hi, 9.7 si
After applying the patch:
%Cpu(s): 0.1 us, 2.3 sy, 0.0 ni, 94.5 id, 0.0 wa, 0.4 hi, 2.6 si
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20241219054755.1615626-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The max chained Tx BDs of latest ENETC (i.MX95 ENETC, rev 4.1) has been
increased to 63, but since the range of MAX_SKB_FRAGS is 17~45, so for
i.MX95 ENETC and later revision, it is better to set ENETC4_MAX_SKB_FRAGS
to MAX_SKB_FRAGS.
In addition, add max_frags in struct enetc_drvdata to indicate the max
chained BDs supported by device. Because the max number of chained BDs
supported by LS1028A and i.MX95 ENETC is different.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241219054755.1615626-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In addition to supporting Rx checksum offload, i.MX95 ENETC also supports
Tx checksum offload. The transmit checksum offload is implemented through
the Tx BD. To support Tx checksum offload, software needs to fill some
auxiliary information in Tx BD, such as IP version, IP header offset and
size, whether L4 is UDP or TCP, etc.
Same as Rx checksum offload, Tx checksum offload capability isn't defined
in register, so tx_csum bit is added to struct enetc_drvdata to indicate
whether the device supports Tx checksum offload.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20241219054755.1615626-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a UDP socket changes its local address while it's receiving
datagrams, as a result of connect(), there is a period during which
a lookup operation might fail to find it, after the address is changed
but before the secondary hash (port and address) and the four-tuple
hash (local and remote ports and addresses) are updated.
Secondary hash chains were introduced by commit 30fff9231f ("udp:
bind() optimisation") and, as a result, a rehash operation became
needed to make a bound socket reachable again after a connect().
This operation was introduced by commit 719f835853 ("udp: add
rehash on connect()") which isn't however a complete fix: the
socket will be found once the rehashing completes, but not while
it's pending.
This is noticeable with a socat(1) server in UDP4-LISTEN mode, and a
client sending datagrams to it. After the server receives the first
datagram (cf. _xioopen_ipdgram_listen()), it issues a connect() to
the address of the sender, in order to set up a directed flow.
Now, if the client, running on a different CPU thread, happens to
send a (subsequent) datagram while the server's socket changes its
address, but is not rehashed yet, this will result in a failed
lookup and a port unreachable error delivered to the client, as
apparent from the following reproducer:
LEN=$(($(cat /proc/sys/net/core/wmem_default) / 4))
dd if=/dev/urandom bs=1 count=${LEN} of=tmp.in
while :; do
taskset -c 1 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc &
sleep 0.1 || sleep 1
taskset -c 2 socat OPEN:tmp.in UDP4:localhost:1337,shut-null
wait
done
where the client will eventually get ECONNREFUSED on a write()
(typically the second or third one of a given iteration):
2024/11/13 21:28:23 socat[46901] E write(6, 0x556db2e3c000, 8192): Connection refused
This issue was first observed as a seldom failure in Podman's tests
checking UDP functionality while using pasta(1) to connect the
container's network namespace, which leads us to a reproducer with
the lookup error resulting in an ICMP packet on a tap device:
LOCAL_ADDR="$(ip -j -4 addr show|jq -rM '.[] | .addr_info[0] | select(.scope == "global").local')"
while :; do
./pasta --config-net -p pasta.pcap -u 1337 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc &
sleep 0.2 || sleep 1
socat OPEN:tmp.in UDP4:${LOCAL_ADDR}:1337,shut-null
wait
cmp tmp.in tmp.out
done
Once this fails:
tmp.in tmp.out differ: char 8193, line 29
we can finally have a look at what's going on:
$ tshark -r pasta.pcap
1 0.000000 :: ? ff02::16 ICMPv6 110 Multicast Listener Report Message v2
2 0.168690 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
3 0.168767 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
4 0.168806 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
5 0.168827 c6:47:05:8d:dc:04 ? Broadcast ARP 42 Who has 88.198.0.161? Tell 88.198.0.164
6 0.168851 9a:55:9a:55:9a:55 ? c6:47:05:8d:dc:04 ARP 42 88.198.0.161 is at 9a:55:9a:55:9a:55
7 0.168875 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
8 0.168896 88.198.0.164 ? 88.198.0.161 ICMP 590 Destination unreachable (Port unreachable)
9 0.168926 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
10 0.168959 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
11 0.168989 88.198.0.161 ? 88.198.0.164 UDP 4138 60260 ? 1337 Len=4096
12 0.169010 88.198.0.161 ? 88.198.0.164 UDP 42 60260 ? 1337 Len=0
On the third datagram received, the network namespace of the container
initiates an ARP lookup to deliver the ICMP message.
In another variant of this reproducer, starting the client with:
strace -f pasta --config-net -u 1337 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc 2>strace.log &
and connecting to the socat server using a loopback address:
socat OPEN:tmp.in UDP4:localhost:1337,shut-null
we can more clearly observe a sendmmsg() call failing after the
first datagram is delivered:
[pid 278012] connect(173, 0x7fff96c95fc0, 16) = 0
[...]
[pid 278012] recvmmsg(173, 0x7fff96c96020, 1024, MSG_DONTWAIT, NULL) = -1 EAGAIN (Resource temporarily unavailable)
[pid 278012] sendmmsg(173, 0x561c5ad0a720, 1, MSG_NOSIGNAL) = 1
[...]
[pid 278012] sendmmsg(173, 0x561c5ad0a720, 1, MSG_NOSIGNAL) = -1 ECONNREFUSED (Connection refused)
and, somewhat confusingly, after a connect() on the same socket
succeeded.
Until commit 4cdeeee925 ("net: udp: prefer listeners bound to an
address"), the race between receive address change and lookup didn't
actually cause visible issues, because, once the lookup based on the
secondary hash chain failed, we would still attempt a lookup based on
the primary hash (destination port only), and find the socket with the
outdated secondary hash.
That change, however, dropped port-only lookups altogether, as side
effect, making the race visible.
To fix this, while avoiding the need to make address changes and
rehash atomic against lookups, reintroduce primary hash lookups as
fallback, if lookups based on four-tuple and secondary hashes fail.
To this end, introduce a simplified lookup implementation, which
doesn't take care of SO_REUSEPORT groups: if we have one, there are
multiple sockets that would match the four-tuple or secondary hash,
meaning that we can't run into this race at all.
v2:
- instead of synchronising lookup operations against address change
plus rehash, reintroduce a simplified version of the original
primary hash lookup as fallback
v1:
- fix build with CONFIG_IPV6=n: add ifdef around sk_v6_rcv_saddr
usage (Kuniyuki Iwashima)
- directly use sk_rcv_saddr for IPv4 receive addresses instead of
fetching inet_rcv_saddr (Kuniyuki Iwashima)
- move inet_update_saddr() to inet_hashtables.h and use that
to set IPv4/IPv6 addresses as suitable (Kuniyuki Iwashima)
- rebase onto net-next, update commit message accordingly
Reported-by: Ed Santiago <santiago@redhat.com>
Link: https://github.com/containers/podman/issues/24147
Analysed-by: David Gibson <david@gibson.dropbear.id.au>
Fixes: 30fff9231f ("udp: bind() optimisation")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault says:
====================
ipv4: Consolidate route lookups from IPv4 sockets.
Create inet_sk_init_flowi4() so that the different IPv4 code paths that
need to do a route lookup based on an IPv4 socket don't need to
reimplement that logic.
====================
Link: https://patch.msgid.link/cover.1734357769.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv4 code commonly has to initialise a flowi4 structure from an IPv4
socket. This requires looking at potential IPv4 options to set the
proper destination address, call flowi4_init_output() with the correct
set of parameters and run the sk_classify_flow security hook.
Instead of reimplementing these operations in different parts of the
stack, let's define inet_sk_init_flowi4() which does all these
operations.
The first user is inet_sk_rebuild_header(), where inet_sk_init_flowi4()
replaces ip_route_output_ports(). Unlike ip_route_output_ports(), which
sets the flowi4 structure and performs the route lookup in one go,
inet_sk_init_flowi4() only initialises the flow. The route lookup is
then done by ip_route_output_flow(). Decoupling flow initialisation
from route lookup makes this new interface applicable more broadly as
it will allow some users to overwrite specific struct flowi4 members
before the route lookup.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/fd416275262b1f518d5abfcef740ce4f4a1a6522.1734357769.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PTP driver code only works for certain KSZ switches like KSZ9477,
KSZ9567, LAN937X and their varieties. This code is enabled by kernel
configuration CONFIG_NET_DSA_MICROCHIP_KSZ_PTP. As the DSA driver is
common to work with all KSZ switches this PTP code is not appropriate
for other unsupported switches. The ptp_capable indication is added to
the chip data structure to signal whether to execute those code.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Link: https://patch.msgid.link/20241218020240.70601-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata says:
====================
bridge: Handle changes in VLAN_FLAG_BRIDGE_BINDING
When bridge binding is enabled on a VLAN netdevice, its link state should
track bridge ports that are members of the corresponding VLAN. This works
for a newly-added netdevices. However toggling the option does not have the
effect of enabling or disabling the behavior as appropriate.
In this patchset, have bridge react to bridge_binding toggles on VLAN
uppers.
There has been another attempt at supporting this behavior in 2022 by
Sevinj Aghayeva [0]. A discussion ensued that informed how this new
patchset is constructed, namely that the logic is in the bridge as opposed
to the 8021q driver, and the bridge reacts to NETDEV_CHANGE events on the
8021q upper.
Patches #1 and #2 contain the implementation, patches #3 and #4 a
selftest.
[0] https://lore.kernel.org/netdev/cover.1660100506.git.sevinj.aghayeva@gmail.com/
====================
Link: https://patch.msgid.link/cover.1734540770.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Under DOS, inet_peer_xrlim_allow() might be called millions
of times per second from different cpus.
Make sure to write over peer->rate_tokens and peer->rate_last
only when really needed.
Note the inherent races of this function are still there,
we do not care of precise ICMP rate limiting.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241219150330.3159027-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dr. David Alan Gilbert says:
====================
hisilicon hns deadcoding
From: "Dr. David Alan Gilbert" <linux@treblig.org>
A small set of deadcoding for functions that are not
called, and a couple of function pointers that they
called.
Build tested only; I don't have the hardware.
====================
Link: https://patch.msgid.link/20241218163341.40297-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With hns_dsaf_roce_reset() removed in a previous patch, the two
helper member pointers, 'hns_dsaf_roce_srst', and 'hns_dsaf_srst_chns'
are now unread.
Remove them, and the helper functions that they were initialised
to, that is hns_dsaf_srst_chns(), hns_dsaf_srst_chns_acpi(),
hns_dsaf_roce_srst() and hns_dsaf_roce_srst_acpi().
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jijie Shao<shaojijie@huawei.com>
Link: https://patch.msgid.link/20241218163341.40297-4-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
