add_subprog_and_kfunc() combines two operations with different ordering
requirements. Subprogram discovery must precede validation of func_info and
line_info, while kfunc descriptors are only needed by the verifier after its
initial program setup is complete.
Split the helper into add_subprogs() and add_kfuncs() so each operation can be
placed according to its actual dependencies. Keep both calls adjacent and in
their existing phase for now, and add short comments describing their roles.
No functional change is intended for valid programs.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://patch.msgid.link/20260808003938.3486067-3-memxor@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
BTF processing is split around subprogram discovery. The first phase gets
program BTF and imports func_info because a BTF-tagged exception callback
may not be referenced by any instruction. Subprogram discovery needs this
metadata to find it.
The later phase validates func_info and line_info against the complete
subprogram table and applies CO-RE relocations. This split breaks a real
dependency cycle rather than merely running the same checks early.
Rename bpf_check_btf_info_early() and check_btf_func_early() to preparation
names that reflect this role. Add short call-site comments to make the two
phases and their responsibilities clear.
No functional change is intended.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://patch.msgid.link/20260808003938.3486067-2-memxor@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
After the previous commit bpf_is_reg64() is only used in a context
where destination register's property is queried, and only for
instructions for which insn_def_regno() >= 0. Hence, simplify the
function by:
- removing unused parameters;
- removing code paths considering BPF_JMP{,32} instructions;
- streamlining the condition expressions.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260807-static-zext-v4-6-b6c270013c77@gmail.com
As reported in the thread [1], the verifier's 32-bit operations zero
extension logic is broken. This logic is responsible for correct
semantics of 32-bit operations on s390 architecture.
According to BPF semantics, operation `w1 += 1` is supposed to zero
extend the upper half of the register `r1`. On s390 the JIT relies on
the verifier emitting explicit zero extension before such operations.
The verifier attempts to minimize the amount of zero extensions
inserted by tracking whether upper halves of the 64-bit registers are
ever used. Previously such tracking worked as follows:
- bpf_reg_state->subreg_def field was set by do_check_insn()
for each operation defining lower but not the upper halves
of the register.
- Whenever an operation reading the whole register was verified,
the verifier checked register's subreg_def and set
bpf_insn_aux_data->zext_dst flag as true via a call to
mark_insn_zext() function.
- After the verification was complete, a special pass
bpf_opt_subreg_zext_lo32_rnd_hi32() extended 32-bit operations
with bpf_insn_aux_data->zext_dst set as true by adding
explicit zero extension.
Note that the logic above relies on bpf_reg_state->subreg_def,
which is a property of a current verifier state.
Before the commit [2] two additional steps happened:
- The verifier tracked upper and lower register halves' liveness as
flags REG_LIVE_READ{32,64} in bpf_reg_state->live.
- The function propagate_liveness() called mark_insn_zext()
in order to transfer the knowledge about which registers have
their upper halves alive (and thus might require zero extension).
The commit [2] removed the two steps described above,
hence making possible a situation like below:
- The register's upper half is set and is used on some verification
path P1 and the register happens not to be marked as precise.
- The checkpoint C is created while processing some instruction
between register initialization and usage.
- On some other verification path P2 the register's upper half is not
initialized and that path ends hitting the checkpoint C.
- In such a case the register's initialization on path P2 would lack
zext_dst mark, making it possible for the program to inject
an arbitrary value in the register's upper half.
This commit replaces subreg_def based logic with computing zext_dst
statically, as a part of the bpf_compute_live_registers() analysis:
- The analysis now tracks usage of upper and lower halves of the
registers separately.
- If some instruction defines a 32-bit subregister, but not the whole
register, *and* the upper half of the register is alive after that
instruction, the instruction is marked as zext_dst.
There is one notable drop in precision: whenever a BPF subprogram is
called, all 64 bits of parameter registers are presumed to be used.
The assumption is that such a drop in precision would not inflict
a noticeable performance penalty.
[1] https://lore.kernel.org/bpf/CAGKGUv=sOuqQtA1Ub-5JXfA4FPosJFYKAQE4B79cK+P1erxqtg@mail.gmail.com/
[2] commit 107e169799 ("bpf: disable and remove registers chain based liveness")
Fixes: 107e169799 ("bpf: disable and remove registers chain based liveness")
Reported-by: Min-gyu Kim <gimm78064@gmail.com>
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/CAGKGUv=sOuqQtA1Ub-5JXfA4FPosJFYKAQE4B79cK+P1erxqtg@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20260807-static-zext-v4-5-b6c270013c77@gmail.com
Extend compute_live_registers() to track upper and lower register
halves' liveness separately. This is mostly straightforward:
- use/def masks are extended to track 2 bits per register;
- compute_insn_live_regs() is updated to properly track these
2 bits according to the instruction semantics.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260807-static-zext-v4-4-b6c270013c77@gmail.com
bpf_do_misc_fixups() converts the following address space cast
instructions to 32-bit moves:
- cast from address space 1 (user) to address space 0 (kernel)
- cast from address space 0 (kernel) to address space 1 (user)
iff associated arena map has a BPF_F_NO_USER_CONV flag.
Extract a predicate detecting such instructions for use in the
following patches.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260807-static-zext-v4-2-b6c270013c77@gmail.com
At the moment there are more callsites that want bpf_verbose_insn() to
not print a newline after the instruction, than callsites that want a
newline. Drop '\n' from disasm.c. Non-functional change.
The changes in bpftool are verified by writing a bpf program using a
variety of instructions and comparing `prog dump xlated` output in the
following modes: plain, opcodes, visual, visual opcodes. The output
before and after the changes is identical.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260807-static-zext-v4-1-b6c270013c77@gmail.com
Pull BPF fixes from Daniel Borkmann:
- Fix BPF verifier to preserve full pointer state for commuted
scalar += pointer arithmetic (Yiyang Chen, Eduard Zingerman)
- Fix a use-after-free of request sockets in the BPF TCP iterator
batching (Jose Fernandez)
- Fix a use-after-free of sk_redir in the BPF sockmap send verdict
path (Chengfeng Ye)
- Fix a netns reference imbalance in the BPF conntrack kfuncs
(Chengfeng Ye)
- Fix bpf_get_fsverity_digest() dynptr assumptions and silent
digest truncation (Eric Biggers)
- Fix bpf_tcp_{gen,check}_syncookie to check sk_state before
sk_protocol to make sure it is a full socket (Luxiao Xu)
- Fix rqspinlock to reset the tail when preserving the queue
on deadlock (Kumar Kartikeya Dwivedi)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
rqspinlock: Reset tail when preserving queue on deadlock
bpf: Check sk_state before sk_protocol in bpf_tcp_*_syncookie
fsverity: Fix silent truncation in bpf_get_fsverity_digest()
fsverity: Fix bpf_get_fsverity_digest() dynptr assumptions
bpf: tcp: Fix use-after-free in bpf_iter_tcp_established_batch()
bpf: Fix netns reference imbalance in conntrack kfuncs
bpf, sockmap: Fix sk_redir use-after-free in send verdict
selftests/bpf: Cover commuted pointer state propagation
bpf: Propagate untrusted pointer state in commuted arithmetic
bpf: Preserve pointer state for commuted arithmetic
bpf: Simplify sanitize_err() signature
A BPF_LOAD_ACQ is not rewritten to a BPF_PROBE_MEM load by the verifier,
unlike a regular BPF_LDX, so the JIT emits a plain load with no exception
table entry and a fault panics the kernel instead of being handled.
Reject the source pointer types that a BPF_LDX would have had that fault
protection applied to, i.e. the ones bpf_convert_ctx_accesses() turns
into BPF_PROBE_MEM: a bare PTR_TO_BTF_ID, PTR_TO_BTF_ID | PTR_UNTRUSTED,
PTR_TO_BTF_ID | MEM_ALLOC | PTR_UNTRUSTED and PTR_TO_MEM | MEM_RDONLY |
PTR_UNTRUSTED.
This is reachable e.g. by loading ->mm out of a trusted task_struct
yields an untrusted pointer to mm_struct, and it is NULL for a kernel
thread:
[...]
SEC("tp_btf/sched_switch")
int BPF_PROG(demo, bool preempt, struct task_struct *prev,
struct task_struct *next)
{
struct mm_struct *mm = next->mm; /* untrusted */
out_ldx = (__u64)mm->pgd; /* BPF_LDX */
out_acq = load_acquire(&mm->pgd); /* BPF_LOAD_ACQ */
return 0;
}
[...]
Both dereference the same pointer, but only the BPF_LDX is protected
(x86-64 JIT, jump targets shown prog-relative):
[...]
; out_ldx = (__u64)mm->pgd;
17: movq $-10485760, %r10
1e: movq %rsi, %r11
21: addq $184, %r11
28: subq %r10, %r11
2b: movabsq $140737498841088, %r10
35: cmpq %r10, %r11
38: ja 0x3e <-- kernel addr?
3a: xorl %edi, %edi <-- no: dst = 0, skip the load
3c: jmp 0x45
3e: movq 184(%rsi), %rdi <-- yes: load + extable entry
[...]
; load_acquire(&mm->pgd)
53: movq %rsi, %rdi
56: movq 184(%rdi), %rax <-- no check, no extable entry
[...]
Note that BPF_PROBE_MEM is not visible in a bpftool xlated dump, as
bpf_insn_prepare_dump() rewrites it back to BPF_MEM.
A PTR_TRUSTED pointer is deliberately not on the list. Such a load is
not converted either, but it does not need to be, since the pointer is
guaranteed live, so load-acquire from it stays allowed.
The check is gated on BPF_LOAD_ACQ so that atomic RMW and store-release
error messages are unchanged; writes (RMW / store-release) to such
pointers are already rejected elsewhere, so only load-acquire needs this.
Fixes: 880442305a ("bpf: Introduce load-acquire and store-release instructions")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260806201047.333389-1-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Currently, the destruction of the waiter queue is suppressed for
rqspinlock in cases where a deadlock is detected. Deadlock checks happen
relatively frequently (on entry for AA, within 1ms for ABBA), and waiter
threads may not be involved in locking scenarios involving deadlocks.
Thus, it is useful to not flush the queue and let other waiters take a
stab at acquiring the lock after we detect a deadlock and exit.
However, we need to follow the same logic as what we did previously for
the waitq_timeout label: reset the tail, and if we cannot, signal the
next waiter appropriately. In case of deadlocks, this signal would just
mark the MCS node as unlocked, and in case of timeouts, it would signal
RES_TIMEOUT_VAL. The difference thus is in the value propagated, which
decides whether the queue remains active or gets flushed.
Not doing the tail reset, and waiting for the next waiter can lead to
cases where we are the final waiter, and thus no next waiter arrives,
leading to intermittent stalls in this path. Once the next waiter does
join, we will be unblocked. In the theoretical case when the next waiter
never joins, we risk stalling indefinitely.
This can only happen for ABBA deadlocks, since entry into the wait queue
is guarded with AA checks. A precise sequence of executions leading up
to this scenario can be:
CPU 0 holds lock A.
CPU 1 holds lock B.
CPU 2 attempts lock B, becomes the pending waiter for B.
CPU 0 attempts lock B. B has locked+pending bits set, thus CPU 0 queues.
CPU 1 attempts lock A.
CPU 0 detects an ABBA deadlock.
Once deadlock detection happens for CPU 0, it will sit waiting for the
next waiter in the queue to populate node->next, which will experience
delays until such a waiter arrives.
Fix this by adjusting the logic for the check for deadlocks preceding
the waitq_timeout label. It would make sense to consolidate code for
both cases and use 'ret' to distinguish the value being propagated, but
that is left as an exercise for a future refactoring task to avoid diff
noise in this patch.
Fixes: 7bd6e5ce5b ("rqspinlock: Disable queue destruction for deadlocks")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260802021759.1139457-1-memxor@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Disabling preemption or local IRQs keeps the current CPU in an RCU
read-side critical section, but in_rcu_cs() does not account for either
state. The verifier therefore rejects safe kptr accesses and invalidates
pointers when another RCU source ends.
Include preemption-disabled and IRQ-disabled state in in_rcu_cs().
Invalidate RCU-protected pointers on RCU unlock, preempt enable, or IRQ
restore only after the final protection ends.
Signed-off-by: Ning Ding <dingning04@gmail.com>
Link: https://lore.kernel.org/bpf/20260805233940.3966981-2-dingning04@gmail.com
[ kkd: Simplify was_in_rcu_cs on spin unlock and adjust the selftest. ]
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
The verifier currently keeps a hard-coded list of kfuncs that may be
called while holding a bpf_spin_lock. With KF_SPINLOCK_SAFE available,
retaining this list creates two sources of truth and requires verifier
changes whenever another lock-safe kfunc is added.
Mark every kfunc currently accepted by kfunc_spin_allowed() with
KF_SPINLOCK_SAFE. This covers the graph, numeric iterator, resource
spin lock, arena, and stream kfuncs.
Remove the obsolete category checks and make kfunc_spin_allowed() rely
solely on the kfunc registration metadata. This preserves the behavior
of existing kfuncs while using the same mechanism for built-in and
module kfuncs.
Signed-off-by: Kaitao Cheng <chengkaitao@kylinos.cn>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20260805153340.34776-3-kaitao.cheng@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
bloom_map_alloc() has two 32-bit-specific problems when the computed
bitmap reaches the U32_MAX fallback case.
First, BITS_TO_BYTES(U32_MAX) is evaluated with 32-bit arithmetic. The
addition performed by DIV_ROUND_UP wraps, so the map allocates only the
fixed-size bloom filter object while keeping bitset_mask == U32_MAX.
Subsequent updates can then write past the allocated object.
Second, fixing only the allocation size is not sufficient. The bloom hash
is a u32, but set_bit() takes a signed long bit number and x86 test_bit()
eventually feeds the index to variable_test_bit(long, ...). On 32-bit
kernels, hashes in [0x80000000, U32_MAX] therefore become negative bit
offsets. x86 bt/bts with a memory operand interpret those offsets relative
to the supplied base, so a map with bitset_mask == U32_MAX can read or
write before bloom->bitset even after allocating the full 512 MiB bitmap.
Keep the U32_MAX fallback, but split each hash into a word pointer and an
in-word bit number before calling test_bit() or set_bit(). The bitops
argument is then always in [0, BITS_PER_LONG - 1], while BIT_WORD(h) still
selects the intended word in the full bitmap.
Compute the bitset size from (u64)bitset_mask + 1 before passing the final
size to bpf_map_area_alloc(). This fixes the original under-allocation and
keeps the allocated storage consistent with the addressable bitset.
Exploitation note: local privilege escalation is possible on a 32-bit x86
kernel using the under-allocation bug from a binary with CAP_BPF.
Fixes: 9330986c03 ("bpf: Add bloom filter map implementation")
Signed-off-by: Jérémy Jean <Jeremy.Jean@oss.cyber.gouv.fr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20260805060228.2703051-1-Jeremy.Jean@oss.cyber.gouv.fr
Assisted-by: Codex:gpt-5
When CONFIG_FUNCTION_ERROR_INJECTION is disabled, a sleepable tracing prog
is allowed to attach to '__x64_'-alike prefix symbols.
It is because the verifier does not verify whether the symbol is a kernel
function or a bpf prog. That said, a sleepable tracing prog is allowed to
attach to a bpf prog target whose name has '__x64_'-alike prefix.
For example, a sleepable fentry prog attaches to a '__x64_sys_nop' XDP
prog, and copies buffer from a user pointer with bpf_copy_from_user()
helper. After attaching the XDP prog to lo interface, the kernel BUG
could be triggered by 'ping -c 1 -W 1 127.0.0.1':
[ 3.460756] BUG: sleeping function called from invalid context at kernel/bpf/trampoline.c:1324
Fix it by disallowing sleepable prog always when its target
btf is not a kernel's btf.
Fixes: 16d9c56606 ("bpf: Always allow sleepable programs on syscalls")
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/20260805150810.34907-2-leon.hwang@linux.dev
There's no need to modify the trace object bpf_get_stackid_pe, we just
need to pass the needed callchain length in separate argument.
This way we can have callchain pointers const and remove the trace->nr
modification and restoration.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260803210149.296496-13-jolsa@kernel.org
There's no need to modify the trace object bpf_get_stack_pe, we just
need to pass the needed callchain length in separate argument.
This way we can have callchain pointers const and remove the trace->nr
modification and restoration.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260803210149.296496-12-jolsa@kernel.org
get_perf_callchain() returns a per-CPU perf_callchain_entry buffer and
releases its recursion slot via put_callchain_entry() before returning,
so nothing keeps the entry reserved while __bpf_get_stack() consumes
it below.
A preemptible BPF program (e.g. a non-sleepable raw tracepoint program
on a PREEMPT kernel, which runs under migrate_disable() but not
preempt_disable()) can be scheduled out between obtaining the entry
and the copy. Another task scheduled on the same CPU then reuses the
same per-CPU buffer and overwrites trace->nr with a larger value.
copy_len is then computed from the inflated trace->nr and can exceed
the caller's buffer, causing an out-of-bounds write in the memcpy()
and in the build_id path.
The rcu_read_lock() taken here alone does not prevent this. It is
only taken on the may_fault path, and under CONFIG_PREEMPT_RCU it does
not disable preemption; it merely keeps perf's callchain buffer array
alive (freed via call_rcu()) and does nothing to stop another task
from reusing the entry.
Disable preemption around obtaining the callchain entry and copying
it into the caller's buffer, so the entry cannot be reused underneath
us and trace->nr stays bounded by max_depth. Build ID resolution may
fault and is therefore deferred until after preemption is re-enabled;
by then the instruction pointers have already been copied into buf,
so it operates only on that private copy. Note, preempt_disable() also
subsumes the buffer-lifetime guarantee the rcu_read_lock() provided,
since a preempt-disabled section is an RCU read-side critical section
for the callchain buffers' call_rcu() reclaim.
Fixes: c195651e56 ("bpf: add bpf_get_stack helper")
Reported-by: Tao Chen <chen.dylane@linux.dev>
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <borkmann@iogearbox.net>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20260803210149.296496-11-jolsa@kernel.org
Closes: https://lore.kernel.org/bpf/20260206090653.1336687-1-chen.dylane@linux.dev/
[ changed Fixes: commit ]
Both bpf_get_task_stack and bpf_get_task_stack_sleepable helpers that
use __bpf_get_task_stack have buf defined as ARG_PTR_TO_UNINIT_MEM
argument and we should initialize the buf on every return path.
Adding missing buf memset for __bpf_get_task_stack fail paths. This
provides deterministic buffer contents, which is useful when the buffer
is used directly as a map key.
Fixes: 06ab134ce8 ("bpf: Refcount task stack in bpf_get_task_stack")
Fixes: b992f01e66 ("bpf: Guard against accessing NULL pt_regs in bpf_get_task_stack()")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260803210149.296496-10-jolsa@kernel.org
Replacing __bpf_get_stackid calls with sequence of following functions:
stackid_fastpath
stackid_new_bucket
stackid_install
This makes code more structured and allows us to easily disable
preemption only in bpf_get_stackid in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260803210149.296496-5-jolsa@kernel.org
bpf_iter_num_next() runs on every bpf_for() iteration, so inlining it
drops a call from the loop body. R1 points to the iterator; the returned
pointer to s->cur is R1 itself, since s->cur is first.
s->cur and s->end are int, so the kfunc's s->cur + 1 >= s->end is a
signed 32-bit compare and the inlined code needs no sign extension.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260804134601.2305303-4-puranjay@kernel.org
bpf_for() expands to the bpf_iter_num_{new,next,destroy}() kfuncs, which
the verifier emits as regular calls. They are tiny and only touch the
8-byte on-stack iterator state, so open-code them in bpf_fixup_kfunc_call()
like the other special kfuncs there.
Start with bpf_iter_num_new(): R1 points to the iterator, R2/R3 hold
start/end. The inlined sequence mirrors the kfunc and returns the same
-EINVAL / -E2BIG / 0.
start > end is rejected first, so end - start fits in a u32; range-check
it as u32 on both sides ((u32)(end - start) in the kfunc). A movsx-based
check would emit a cpuv4 instruction that some JITs (x86-32, mips32,
sparc64) decode as a plain move and get wrong.
The emitted instructions are plain BPF, so the interpreter path stays
correct and no jit_required marking is needed.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260804134601.2305303-3-puranjay@kernel.org
The comment on the s->cur + 1 >= s->end check claims the (s64) cast is
needed to avoid overflow when s->cur == s->end == INT_MAX. It isn't:
s->cur + 1 is computed in int and wraps before the cast, so the cast
changes nothing (INT_MAX + 1 compares the same either way).
The wraparound is the point. bpf_iter_num_new() sets s->cur = start - 1,
which wraps to INT_MAX for start == INT_MIN, and the wrapping s->cur + 1
brings it back to start. (s64)s->cur + 1 would instead break iterators
starting at INT_MIN.
Drop the cast and reword the comment. No functional change; the wrap is
well-defined under -fno-strict-overflow.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260804134601.2305303-2-puranjay@kernel.org
check_atomic_load() calls check_load_mem() before atomic_ptr_type_ok().
For a load-acquire that fetches into its own source register (dst_reg ==
src_reg), check_load_mem() overwrites src_reg's type with the type of the
loaded value, so the subsequent atomic_ptr_type_ok() no longer sees the
source pointer and fails to reject the disallowed types (ctx, pkt,
flow_keys, sock).
Since bpf_convert_ctx_accesses() does not rewrite atomic loads, the raw
access to the underlying kernel object is left in place. The destination
type is taken from the ctx access itself, so a load-acquire of the sk
field of struct __sk_buff for example leaves the register typed as
PTR_TO_SOCK_COMMON_OR_NULL, which type_is_sk_pointer() does not match
either, while it actually holds unconverted struct sk_buff bytes. Once
the NULL check has passed this is a type confusion, not just a leak of
kernel data.
Validate src_reg with check_reg_arg() and check the source pointer type
with atomic_ptr_type_ok() before the load again, mirroring
check_atomic_rmw(). Out-of-range register numbers are already rejected
earlier by check_and_resolve_insns() (commit 503d21ef8e ("bpf: Do
register range validation early")), and the only exemption there,
is_stack_arg_ldx(), requires BPF_LDX | BPF_MEM | BPF_DW and thus never
matches a BPF_ATOMIC insn. atomic_ptr_type_ok() can therefore not
dereference register state out of bounds, that is, the out-of-bounds
read addressed by the Fixes commit below does not reappear (as proven
also via selftest).
Fixes: c03bb2fa32 ("bpf: Fix out-of-bounds read in check_atomic_load/store()")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260804201917.253491-1-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
A potential invalid storage access issue can occur after replacing a
cgroup bpf prog.
This occurs in the following scenario:
1. prog1 with storage is attached to a cgroup in multi-attach mode.
2. prog1 is replaced with prog2 using BPF_F_REPLACE in multi-attach
mode, but fails midway (e.g. in bpf_trampoline_link_cgroup_shim or
update_effective_progs).
3. A new prog3 is attached to the cgroup in multi-attach mode.
The reason is that __cgroup_bpf_attach overwrites pl->storage with the
new storage prior to attachment completion. When attachment fails
midway, the cleanup path calls bpf_cgroup_storages_free(new_storage) to
free the newly allocated storage, but fails to restore pl->storage back
to old_storage.
Consequently, the still-active prog1 holds invalid or dangling storage
pointers, leading to an invalid memory access when prog1 executes and
calls bpf_get_local_storage. Additionally, original pl->flags and
cgrp->bpf.flags[atype] are left unrestored.
Fix this by saving old_pl_flags, old_storage, and old_flags prior to the
update, and properly restoring all of them in the cleanup path on error.
Fixes: 7d9c342789 ("bpf: Make cgroup storages shared between programs on the same cgroup")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260803013934.4036646-1-pulehui@huaweicloud.com
Pull futex fix from Ingo Molnar:
- Fix a robust futexes exit race (Keno Fischer)
* tag 'locking-urgent-2026-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Prevent robust futex exit race some more
In a sleepable BPF program, a spin lock can provide the only RCU protection
for a kptr. The final bpf_spin_unlock() ends that protection, but the
verifier leaves the pointer valid. Another CPU can then free the object
before the pointer is used. A capability-limited runtime PoC triggered a
task_struct use-after-free in __bpf_get_task_stack().
Record whether the program is in an RCU-protected context before releasing
the lock. Invalidate RCU-protected pointers only when the unlock leaves the
final such context. This preserves valid pointers in non-sleepable programs
and inside an explicit RCU read-side section.
Fixes: 5861d1e8db ("bpf: Allow bpf_spin_{lock,unlock} in sleepable progs")
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: ChatGPT:GPT-5.6-Pro
Signed-off-by: Ning Ding <dingning04@gmail.com>
Link: https://lore.kernel.org/bpf/20260803112615.3362122-2-dingning04@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Pull liveupdate fix from Mike Rapoport:
- fix a regression caused by allowing coexistence of KHO with deferred
initialization of the memory map
* tag 'liveupdate-fixes-2026-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
kho: align kho_scratch to MAX_ORDER_NR_PAGES pages
Pull sched_ext fixes from Tejun Heo:
- More lifecycle fixes for the new sub-scheduler support: a failed
enable could tear down a never-linked sub-scheduler in a way that
races the root scheduler's disable and leads to a use-after-free,
tasks that were not on the ext class could still get the enable
callback, and a policy-rejection path silently rewrote a running
task's scheduling policy instead of aborting the scheduler.
- Scheduler enable/disable could deadlock with cgroup removal and a
concurrent cgroup weight write through kernfs. Fixed by reordering
lock acquisition.
- Sync wakeups could leave the waker CPU incorrectly marked idle in the
built-in idle-CPU tracking.
- A selftest fix for sleeping tasks whose CPU affinity changes before
wakeup.
* tag 'sched_ext-for-7.2-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
selftests/sched_ext: Handle sleeping task affinity changes in numa test
sched_ext: Mark waker CPU busy when selected in WAKE_SYNC case
sched_ext: Don't enable non-ext tasks in the sub-sched task loops
sched_ext: Skip sub-disable teardown for never-linked sub-schedulers
sched_ext: Take cgroup_lock() first in scx_cgroup_lock()
sched_ext: Reject setting disallow from init_task outside the enable path
Pull cgroup fixes from Tejun Heo:
- A pressure trigger's poll timer could be re-armed while the last
trigger was being torn down and then fire after the cgroup was freed.
Tie the timer to the cgroup's lifetime and shut it down when the
cgroup is freed.
- Writing to a pressure file forked a worker kthread while holding the
cgroup mutex, creating lock dependencies from the mutex to the whole
fork path. A pressure write racing a sched_ext scheduler enable,
which blocks forks before grabbing the mutex, deadlocked.
Fork the worker with the mutex dropped.
- Documentation fix for io.latency behavior on non-rotational devices.
* tag 'cgroup-for-7.2-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
Docs/admin-guide/cgroup-v2: document io.latency rotational vs non-rotational behavior
sched/psi: Shut down rtpoll_timer in psi_cgroup_free()
sched/psi: Create the psimon kthread outside of cgroup_mutex
Commit 814cba835e ("bpf, x86: Fix trampoline stack size for 128-bit
arguments") changed the x86 trampoline to compute the number of
registers from arg_size for every argument, which removed the last user
of BTF_FMODEL_STRUCT_ARG. No other architecture or verifier code looks
at the flag, so remove the macro and the code in __get_type_fmodel_flags()
which sets it.
Keep BTF_FMODEL_SIGNED_ARG at BIT(1) rather than renumbering it to
BIT(0), so BIT(0) is available for a future flag.
No functional change.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260803052726.2821447-1-yonghong.song@linux.dev
Reported by the Sashiko AI review.
arena_vm_fault() returns VM_FAULT_RETRY when it can't take
arena->spinlock, but it never took mmap_lock. The fault path assumes a
VM_FAULT_RETRY handler already dropped mmap_lock and re-takes it on the
retry, so mmap_lock gets taken twice and can deadlock:
do_user_addr_fault()
{
fault = handle_mm_fault(...); // calls arena_vm_fault()
if (fault & VM_FAULT_RETRY)
goto retry; // re-locks mmap_lock
mmap_read_unlock(mm);
}
Return VM_FAULT_SIGBUS instead, for two reasons:
1. We could keep VM_FAULT_RETRY, but then we'd have to drop the fault
lock first and cap the retry ourselves, the way __folio_lock_or_retry()
does.
2. A failed raw_res_spin_lock_irqsave() already means a possible deadlock
was detected, so retrying just hits the same lock again.
So returning VM_FAULT_RETRY here is overkill.
Fixes: b8467290ed ("bpf: arena: make arena kfuncs any context safe")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260728060517.95183-1-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Kfunc argument checking re-derives each argument's kfunc_ptr_arg_type
from BTF on every verification of a call in check_kfunc_args(). Now that
get_kfunc_arg_type() is a function of the kfunc's BTF alone, it no
longer inspects register state. The classification can be computed once
when the call is added and cached. This is a step toward describing
kfuncs with a bpf_func_proto and sharing the helper argument-checking
path.
Generate the classification at bpf_add_kfunc_call() time:
- Extend struct bpf_func_proto to be able to describe a kfunc: widen
arg_type[] and the arg_btf_id[]/arg_size[] union from 5 to
MAX_BPF_FUNC_ARGS, since a kfunc may take up to 12 arguments (5 in
registers, 7 on the stack).
- Embed a bpf_func_proto in struct bpf_kfunc_desc, populated by
gen_kfunc_arg_proto() which runs get_kfunc_arg_type() for each
argument and stores the result in proto.arg_type[]. Grow the
descriptor table's descs[] as a flexible array to not waste memory.
- check_kfunc_args() reads the cached classification from meta->fn
The KF_ARG_PTR_TO_CTX classification depends on the resolved program type,
and for BPF_PROG_TYPE_EXT that is the target program's type, which
resolve_prog_type() reads from prog->aux->saved_dst_prog_type. That field
is normally recorded later during verification in check_attach_btf_id(),
after bpf_add_kfunc_call() has run.
Record saved_dst_prog_type and saved_dst_attach_type from dst_prog at
program load time in bpf_prog_load() so the resolved type is available
at add-call time without reordering check_attach_btf_id(). This keeps
e.g. an freplace of an XDP program calling bpf_xdp_metadata_rx_hash()
classifying its struct xdp_md * argument as context.
The classification result is unchanged; it is only computed earlier and
cached.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20260801074633.1595644-19-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Add kfunc scalar argument types, classify them in get_kfunc_arg_type()
along side with pointer arguments and move scalar type verification
into the main switch in check_kfunc_args(). This keeps BTF-based
classification separate from register validation for every argument,
paving the way for generating the kfunc argument prototype at add-call
time. No functional change intended.
KF_ARG_MEM_SIZE and KF_ARG_CONST_MEM_SIZE now are reachable. Therefore,
remove the fallthrough from KF_ARG_PTR_TO_MEM case and adjust the
register indexing.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260801074633.1595644-18-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Now that get_kfunc_ptr_arg_type() classifies a kfunc pointer argument
from its BTF alone, express a nullable argument by OR-ing PTR_MAYBE_NULL
into the classified type, and resolve a NULL register after
classification instead of before it.
Previously check_kfunc_args() short-circuited a nullable argument passed
a NULL register with a continue placed before get_kfunc_ptr_arg_type(),
so the NULL never reached classification. That kept a register-state
decision (bpf_register_is_null()) ahead of the BTF-based classification.
This mirrors how helper arguments carry PTR_MAYBE_NULL in their
bpf_arg_type and is a step toward describing kfuncs with a bpf_func_proto:
the nullability now travels with the per-argument classification, so it is
captured when the prototype is generated at add-call time.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260801074633.1595644-17-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
get_kfunc_ptr_arg_type() decided part of a kfunc pointer argument's type
from the caller's register: a PTR_TO_BTF_ID (or reg2btf_ids) register made
the argument KF_ARG_PTR_TO_BTF_ID, otherwise it fell through to a memory
buffer. Folding register state into argument classification prevents
describing a kfunc's arguments from its BTF alone, which is a prerequisite
for generating a helper-like prototype and eventually sharing the argument
checking (check_func_arg()) between helpers and kfuncs.
Classify pointer arguments from BTF only, and resolve them against the
register in check_kfunc_args():
- A pointer to a struct that is not paired with a __sz/__szk size
argument is classified KF_ARG_PTR_TO_BTF_ID and then checked against
the register. A register carrying a BTF ID (PTR_TO_BTF_ID or a
reg2btf_ids type) must be referenced or trusted and is matched against
the expected type. The only relaxation is when the struct is composed
of scalars, the register may be verified as a fixed-size memory buffer
sized from the BTF type; anything else is rejected.
- A pointer paired with a size argument is always a memory buffer and is
never classified as BTF_ID, so the __sz/__szk case no longer detours
through BTF_ID.
The new design now accepts one previously rejected case: passing
PTR_TO_BTF_ID to a pointer to scalar w/o a following __sz/__szk. The
argument will be classified as KF_ARG_PTR_TO_MEM | MEM_FIXED_SIZE. The
PTR_TO_BTF_ID register will go through check_mem_reg() ->
check_helper_mem_access() -> check_ptr_to_btf_access(). For a pointer to
scalar arg, a kernel btf id will be rejected unless explicitly granted
by btf_struct_access(); a program allocated btf id will be allowed.
The referenced-or-trusted check thus moves into the KF_ARG_PTR_TO_BTF_ID
resolution, alongside the type match.
get_kfunc_ptr_arg_type() no longer needs the register, so drop its regs
and reg parameters; it is now a pure function of the kfunc's BTF.
When a register cannot satisfy a BTF_ID argument, report the register type
passed and, when the expected struct has a reg2btf_ids mapping, the
register type that would be accepted, instead of a confusing "socket".
Update the affected selftest messages accordingly.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20260801074633.1595644-16-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
A kfunc memory-pointer argument comes in two flavors: a fixed-size buffer
whose access size is derived from the pointed-to BTF type, and a
variable-size buffer paired with a following __sz/__szk size argument.
Both were represented by separate kfunc_ptr_arg_type values
(KF_ARG_PTR_TO_MEM vs KF_ARG_PTR_TO_MEM_SIZE) with the pointer classified
as the latter when a size argument followed.
Mirror how helpers describe the same distinction: classify both as
KF_ARG_PTR_TO_MEM and OR in MEM_FIXED_SIZE for the fixed-size case, just
as helpers use ARG_PTR_TO_MEM | MEM_FIXED_SIZE. The switches now key on
base_type(kf_arg_type) so the flag rides along, and the KF_ARG_PTR_TO_MEM
handler either resolves the size from BTF (MEM_FIXED_SIZE) or falls
through to the mem/size-pair check, which validates the buffer against the
following size register and skips it. No functional change.
Currently, KF_ARG_MEM_SIZE and KF_ARG_CONST_MEM_SIZE are only reachable
from ARG_PTR_TO_MEM fallthrough. A patch later will merge scalar
checking into the same switch and remove the fallthrough.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260801074633.1595644-15-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
get_kfunc_ptr_arg_type() returned KF_ARG_PTR_TO_NULL when a nullable
pointer argument was passed a NULL register. This folded a register-state
decision (bpf_register_is_null()) into what is otherwise BTF-based
argument classification, and it short-circuited before the BTF_ID/MEM
resolution.
Drop KF_ARG_PTR_TO_NULL and handle the NULL case in check_kfunc_args()
instead: a nullable argument that is actually NULL is skipped. Note that
it is okay to skip even when it is a mem+size pair because the size
argument check has been moved to the scalar section. The skip is done
before get_kfunc_ptr_arg_type() so that a NULL passed to a nullable
non-scalar-struct argument is not newly rejected by the BTF_ID/MEM
resolution.
No functional change.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260801074633.1595644-14-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
