Include the header with the prototype to silence the following clang
warnings:
drivers/gpu/drm/amd/amdgpu/../pm/amdgpu_dpm_internal.c:29:6: warning: no
previous prototype for function 'amdgpu_dpm_get_active_displays'
[-Wmissing-prototypes]
void amdgpu_dpm_get_active_displays(struct amdgpu_device *adev)
^
drivers/gpu/drm/amd/amdgpu/../pm/amdgpu_dpm_internal.c:29:1: note: declare
'static' if the function is not intended to be used outside of this
translation unit
void amdgpu_dpm_get_active_displays(struct amdgpu_device *adev)
^
static
drivers/gpu/drm/amd/amdgpu/../pm/amdgpu_dpm_internal.c:76:5: warning: no
previous prototype for function 'amdgpu_dpm_get_vrefresh'
[-Wmissing-prototypes]
u32 amdgpu_dpm_get_vrefresh(struct amdgpu_device *adev)
^
drivers/gpu/drm/amd/amdgpu/../pm/amdgpu_dpm_internal.c:76:1: note: declare
'static' if the function is not intended to be used outside of this
translation unit
u32 amdgpu_dpm_get_vrefresh(struct amdgpu_device *adev)
^
static
2 warnings generated.
Besides that, remove the duplicated prototype of the function
amdgpu_dpm_get_vblank_time in order to keep the consistency of the
headers.
Fixes: 6ddbd37f10 ("drm/amd/pm: optimize the amdgpu_pm_compute_clocks() implementations")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang static analysis reports this error
amdgpu_smu.c:2289:9: warning: Called function pointer
is null (null dereference)
return smu->ppt_funcs->emit_clk_levels(
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
There is a logic error in the earlier check of
emit_clk_levels. The error value is set to
the ret variable but ret is never used. Return
directly and remove the unneeded ret variable.
Fixes: 5d64f9bbb6 ("amdgpu/pm: Implement new API function "emit" that accepts buffer base and write offset")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to have lockdep annotation here, so make sure that we reserve
the PD while removing PRTs even if it isn't strictly necessary since the
VM object is about to be destroyed anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The link encoder mapping could return a null one and causes system crash.
[How]
Let the mapping can get an available link encoder without endpoint
identification check.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following fixes:
-fix for build failure uninitalized error
-Bug fix for DP2 using uncertified cable
-limit unbounded request to 5k
-fix DP LT sequence on EQ fail
-Bug fixes for S3/S4
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The number of lanes wasn't being reset to maximum when reducing link
rate due to an EQ failure. This could result in having fewer lanes in
the verified link capabilities, a lower maximum link bandwidth, and
fewer modes being supported.
[How]
Reset the number of lanes to max when dropping link rate due to EQ
failure during link training.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Ilya <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Even if can_apply_edp_fast_boot is set to 1 at boot, this flag will
be cleared to 0 at S3 resume.
[How]
Keep eDP Vdd on when eDP stream is already enabled.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
VBIOS light up eDP with 6bpc but driver use 8bpc without
disable valid stream then re-enable valid stream. Some
panels can't runtime change color depth.
[How]
Change fastboot timing validation function. Not only check
LANE_COUNT, LINK_RATE...etc
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
When resume from sleep or hiberation, blocked MST Topology discovery might
need to be used.
How:
Added "DETECT_REASON_RESUMEFROMS3S4" to enum dc_detect_reason; use it to
require blocked MST Topology discovery.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Bing Guo <Bing.Guo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Found when running igt@kms_atomic.
Userspace attempts to do a TEST_COMMIT when 0 streams which calls
dc_remove_stream_from_ctx. This in turn calls link_enc_unassign
which ends up modifying stream->link = NULL directly, causing the
global link_enc to be removed preventing further link activity
and future link validation from passing.
[How]
We take care of link_enc unassignment at the start of
link_enc_cfg_link_encs_assign so this call is no longer necessary.
Fixes global state from being modified while unlocked.
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the enabled ppfeatures are just retrieved ahead. We can use
that directly instead of retrieving again and again.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The following scenarios make the driver cache for enabled ppfeatures
outdated and invalid:
- Other tools interact with PMFW to change the enabled ppfeatures.
- PMFW may enable/disable some features behind driver's back. E.g.
for sienna_cichild, on gfxoff entering, PMFW will disable gfx
related DPM features. All those are performed without driver's
notice.
Also considering driver does not actually interact with PMFW such
frequently, the benefit brought by such cache is very limited.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The supported features should be retrieved just after EnableAllDpmFeatures message
complete. And the check(whether some dpm feature is supported) is only needed when we
decide to enable or disable it.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use uint64_t instead of an array of uint32_t. This can avoid
some non-necessary intermediate uint32_t -> uint64_t conversions.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
pflip interrupt order are mapped 1 to 1 to otg id.
e.g. if irq_src=26 corresponds to otg0 then 27->otg1, 28->otg2...
Linux DM registers pflip interrupts per number of crtcs.
In fused pipe case crtc numbers can be less than otg id.
e.g. if one pipe out of 3(otg#0-2) is fused adev->mode_info.num_crtc=2
so DM only registers irq_src 26,27.
This is a bug since if pipe#2 remains unfused DM never gets
otg2 pflip interrupt (irq_src=28)
That may results in gfx failure due to pflip timeout.
[How]
Register pflip interrupts per max num of otg instead of num_crtc
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bypass group programming (utcl2_harvest) aims to forbid UTCL2 to send
invalidation command to harvested SE/SA. Once invalidation command comes
into harvested SE/SA, SE/SA has no response and system hang.
This patch is to add checking if the GART table is already allocated before
invalidating TLB. The new procedure is as following:
1. Calling amdgpu_gtt_mgr_init() in amdgpu_ttm_init(). After this step GTT
BOs can be allocated, but GART mappings are still ignored.
2. Calling amdgpu_gart_table_vram_alloc() from the GMC code. This allocates
the GART backing store.
3. Initializing the hardware, and programming the backing store into VMID0
for all VMHUBs.
4. Calling amdgpu_gtt_mgr_recover() to make sure the table is updated with
the GTT allocations done before it was allocated.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The commit d5e8ff5f7b ("drm/amdgpu: Fixed the defect of soft lock caused by infinite loop")
had fixed this defect.
Revert workaround
commit a2170b4af6 ("drm/amdgpu: Add judgement to avoid infinite loop").
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The FRU and RAS EEPROMs share the same I2C bus on Aldebaran and Vega 20
ASICs. Set the FRU bus "pointer" to this single bus, as access to the FRU
is sought through that bus "pointer" and not through the RAS bus "pointer".
Cc: Roy Sun <Roy.Sun@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Fixes: 2f60dd5076 ("drm/amd: Expose the FRU SMU I2C bus")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In CRIU resume stage, resume all the shared virtual memory ranges from
the data stored inside the resuming kfd process during CRIU restore
phase. Also setup xnack mode and free up the resources.
KFD_IOCTL_SVM_ATTR_CLR_FLAGS is not available for querying via get_attr
interface but we must clear the flags during restore as there might be
some default flags set when the prange is created. Also handle the
invalid PREFETCH atribute values saved during checkpoint by replacing
them with another dummy KFD_IOCTL_SVM_ATTR_SET_FLAGS attribute.
(rajneesh: Fixed the checkpatch reported problems)
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During CRIU restore phase, the VMAs for the virtual address ranges are
not at their final location yet so in this stage, only cache the data
required to successfully resume the svm ranges during an imminent CRIU
resume phase.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During checkpoint stage, save the shared virtual memory ranges and
attributes for the target process. A process may contain a number of svm
ranges and each range might contain a number of attributes. While not
all attributes may be applicable for a given prange but during
checkpoint we store all possible values for the max possible attribute
types.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A KFD process may contain a number of virtual address ranges for shared
virtual memory management and each such range can have many SVM
attributes spanning across various nodes within the process boundary.
This change reports the total number of such SVM ranges and
their total private data size by extending the PROCESS_INFO op of the the
CRIU IOCTL to discover the svm ranges in the target process and a future
patches brings in the required support for checkpoint and restore for
SVM ranges.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the SVM ranges use actual_gpu_id but with Checkpoint Restore
support its possible that the SVM ranges can be resumed on another node
where the actual_gpu_id may not be same as the original (user_gpu_id)
gpu id. So modify svm code to use user_gpu_id.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Both svm_range_get_attr and svm_range_set_attr helpers use mm struct
from current but for a Checkpoint or Restore operation, the current->mm
will fetch the mm for the CRIU master process. So modify these helpers to
accept the task mm for a target kfd process to support Checkpoint
Restore.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Recoverable page faults are represented by the xnack mode setting inside
a kfd process and are used to represent the device page faults. For CR,
we don't consider negative values which are typically used for querying
the current xnack mode without modifying it.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
