We have to read 512 bytes only, therefore read performance isn't really
a concern. Don't bother the user if i2c block read isn't supported.
For i2c_smbus_read_i2c_block_data_or_emulated() to work it's sufficient
if I2C_FUNC_SMBUS_READ_I2C_BLOCK or I2C_FUNC_SMBUS_READ_BYTE_DATA is
supported. Therefore remove the check for I2C_FUNC_SMBUS_READ_WORD_DATA.
In addition check for I2C_FUNC_SMBUS_WRITE_BYTE (included in
I2C_FUNC_SMBUS_BYTE) which is needed for setting the page.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/840c668e-6310-e933-e50e-5abeaecfb39c@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for drivers/ipack/carriers/tpci200 follows this syntax, but the
content inside does not comply with kernel-doc.
This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warning from kernel-doc.
For e.g., running scripts/kernel-doc -none on
drivers/ipack/carriers/tpci200.c emits:
warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* tpci200.c
Provide a simple fix by replacing this occurrence with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Also remove the redundant file name from the comment headers.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Link: https://lore.kernel.org/r/20210522124051.12540-1-yashsri421@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for drivers/ipack/devices/ipoctal follows this syntax, but the
content inside does not comply with kernel-doc.
This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warning from kernel-doc.
For e.g., running scripts/kernel-doc -none on
drivers/ipack/devices/ipoctal.h emits:
warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* ipoctal.h
Provide a simple fix by replacing this occurrence with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Also remove the redundant file name from the comment headers.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Link: https://lore.kernel.org/r/20210522121944.11182-1-yashsri421@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the out_err_bus_register error branch of tpci200_pci_probe,
tpci200->info->cfg_regs is freed by tpci200_uninstall()->
tpci200_unregister()->pci_iounmap(..,tpci200->info->cfg_regs)
in the first time.
But later, iounmap() is called to free tpci200->info->cfg_regs
again.
My patch sets tpci200->info->cfg_regs to NULL after tpci200_uninstall()
to avoid the double free.
Fixes: cea2f7cdff ("Staging: ipack/bridges/tpci200: Use the TPCI200 in big endian mode")
Cc: stable <stable@vger.kernel.org>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Link: https://lore.kernel.org/r/20210524093205.8333-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The XillyUSB driver is the USB variant for the Xillybus FPGA IP core.
Even though it presents a nearly identical API on the FPGA and host,
it's almost a complete rewrite of the driver: The framework for exchanging
data on a USB bus is fundamentally different from doing the same with a
PCIe interface, which leaves very little in common between the existing
driver and the new one for XillyUSB.
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20210526100311.56327-3-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is a preparation for adding another related driver, XillyUSB.
In order to share some code between the existing Xillybus driver and the
one to be added, some functions are moved to xillybus_class.c
XILLYBUS_CLASS is added to Kconfig and is common to all drivers in this
group. The relation with the existing XILLYBUS symbol is "select" rather
than "depends on" XILLYBUS_CLASS, or else "make olddefconfig" will silently
turn off XILLYBUS, which is currently enabled in several distributions.
XILLYBUS_CLASS doesn't depend on anything else, hence using it with
"select" poses no risk for a broken configuration.
After the future addition of the XillyUSB module, the tree of symbols
will be as follows:
XILLYBUS_CLASS --+-- XILLYBUS --+-- XILLYBUS_PCIE
| |
| +-- XILLYBUS_OF
|
+-- XILLYUSB
XILLYBUS is for drivers based upon memory registers + DMA-based interfaces,
and it's combined with XILLYBUS_PCIE and/or XILLYBUS_OF.
XILLYUSB is for the USB variant only.
Or a more detailed, bottom-up outline:
* CONFIG_XILLYBUS_PCIE -> xillybus_pcie.c: Functions related to PCIe.
* CONFIG_XILLYBUS_OF -> xillybus_of.c: Functions related to Xillybus as a
peripheral on an FPGA / Processor combo chip.
* CONFIG_XILLYBUS -> xillybus_core.c: Functions that are common to the two
above, mainly access to the peripheral with memory-mapped registers and
DMA.
* CONFIG_XILLYUSB -> xillyusb.c: The driver for the USB variant, accesses
the peripheral through the USB framework.
* CONFIG_XILLYBUS_CLASS -> xillybus_class.c: The new module, which contains
the class and API parts that would otherwise appear both in
xillybus_core.c and xillyusb.c. Contains utility functions for the two
latter.
And since I'm at it, comments on the module names are added in the
Kconfig's help part.
The functions are exported with the non-GPL EXPORT_SYMBOL (a matter of
taste).
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20210526100311.56327-2-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c999fbbdcf ("w1: ds2438: support for writing to offset
register") added more documentation, but had a one-off line for the
header of a section which caused the build warning:
Documentation/w1/slaves/w1_ds2438.rst:56: WARNING: Title underline too short.
Resolve this by fixing the underline to be long enough.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/YKthRzCGan9WEcmP@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
container_of() only returns NULL if the passed pointer is NULL _and_ if
the embedded element is the first element of the structure. Even if that
is the case, testing against it is misleading and possibly dangerous
because the position of the embedded element may change. In this case,
the check is unnecessary since it is known that file->private_data is
never NULL for an open file, and container_of() will therefore also
never be NULL. Drop the check.
Acked-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210521200457.2112041-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added a sysfs entry to support writing to the offset register on page1.
This register is used to calibrate the chip canceling offset errors in the
current ADC. This means that, over time, reading the IAD register will not
return the correct current measurement, it will have an offset. Writing to
the offset register if the two's complement of the current register while
passing zero current to the load will calibrate the measurements. This
change was tested on real hardware and it was able to calibrate the chip
correctly.
Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com>
Link: https://lore.kernel.org/r/20210519223046.13798-7-sampaio.ime@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/staging/comedi/drivers/ni_routes.c:249: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/staging/comedi/drivers/ni_routes.c:398: warning: Function parameter or member 'routes' not described in 'ni_route_set_has_source'
drivers/staging/comedi/drivers/ni_routes.c:398: warning: Function parameter or member 'source' not described in 'ni_route_set_has_source'
drivers/staging/comedi/drivers/ni_routes.c:524: warning: Function parameter or member 'src_sel_reg_value' not described in 'ni_find_route_source'
drivers/staging/comedi/drivers/ni_routes.c:524: warning: Function parameter or member 'dest' not described in 'ni_find_route_source'
drivers/staging/comedi/drivers/ni_routes.c:524: warning: Function parameter or member 'tables' not described in 'ni_find_route_source'
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Cc: "Spencer E. Olson" <olsonse@umich.edu>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210520122538.3470259-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull char/misc driver fixes from Greg KH:
"Here is a big set of char/misc/other driver fixes for 5.13-rc3.
The majority here is the fallout of the umn.edu re-review of all prior
submissions. That resulted in a bunch of reverts along with the
"correct" changes made, such that there is no regression of any of the
potential fixes that were made by those individuals. I would like to
thank the over 80 different developers who helped with the review and
fixes for this mess.
Other than that, there's a few habanna driver fixes for reported
issues, and some dyndbg fixes for reported problems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (82 commits)
misc: eeprom: at24: check suspend status before disable regulator
uio_hv_generic: Fix another memory leak in error handling paths
uio_hv_generic: Fix a memory leak in error handling paths
uio/uio_pci_generic: fix return value changed in refactoring
Revert "Revert "ALSA: usx2y: Fix potential NULL pointer dereference""
dyndbg: drop uninformative vpr_info
dyndbg: avoid calling dyndbg_emit_prefix when it has no work
binder: Return EFAULT if we fail BINDER_ENABLE_ONEWAY_SPAM_DETECTION
cdrom: gdrom: initialize global variable at init time
brcmfmac: properly check for bus register errors
Revert "brcmfmac: add a check for the status of usb_register"
video: imsttfb: check for ioremap() failures
Revert "video: imsttfb: fix potential NULL pointer dereferences"
net: liquidio: Add missing null pointer checks
Revert "net: liquidio: fix a NULL pointer dereference"
media: gspca: properly check for errors in po1030_probe()
Revert "media: gspca: Check the return value of write_bridge for timeout"
media: gspca: mt9m111: Check write_bridge for timeout
Revert "media: gspca: mt9m111: Check write_bridge for timeout"
media: dvb: Add check on sp8870_readreg return
...
Pull quota fixes from Jan Kara:
"The most important part in the pull is disablement of the new syscall
quotactl_path() which was added in rc1.
The reason is some people at LWN discussion pointed out dirfd would be
useful for this path based syscall and Christian Brauner agreed.
Without dirfd it may be indeed problematic for containers. So let's
just disable the syscall for now when it doesn't have users yet so
that we have more time to mull over how to best specify the filesystem
we want to work on"
* tag 'quota_for_v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Disable quotactl_path syscall
quota: Use 'hlist_for_each_entry' to simplify code
Pull mount_setattr fix from Christian Brauner:
"This makes an underlying idmapping assumption more explicit.
We currently don't have any filesystems that support idmapped mounts
which are mountable inside a user namespace, i.e. where s_user_ns !=
init_user_ns. That was a deliberate decision for now as userns root
can just mount the filesystem themselves.
Express this restriction explicitly and enforce it until there's a
real use-case for this. This way we can notice it and will have a
chance to adapt and audit our translation helpers and fstests
appropriately if we need to support such filesystems"
* tag 'fs.idmapped.mount_setattr.v5.13-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
fs/mount_setattr: tighten permission checks
