With the recent removal of the uncalled
lbs_(enter|exit)_auto_deep_sleep()
functions, it's no longer possible to set
priv->is_auto_deep_sleep_enabled
so we can remove all tests of it and the variable itself.
With that gone, priv->wakeup_dev_required also doesn't
get set, so we can remove any testing of it.
Now the timer itself, and the function it calls goes.
The timer used the apparently unset auto_deep_sleep_timeout
member, which can also go.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250121013300.433538-4-linux@treblig.org
'struct mwifiex_if_ops' are not modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
61439 4367 32 65838 1012e drivers/net/wireless/marvell/mwifiex/pcie.o
After:
=====
text data bss dec hex filename
61699 4127 32 65858 10142 drivers/net/wireless/marvell/mwifiex/pcie.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/03d524b72f20a0302e4de5e0ebdc20ab69469dec.1737308889.git.christophe.jaillet@wanadoo.fr
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Reorder includes for distributed-arp-table.c, by Sven Eckelmann
- Fix translation table change handling, by Remi Pommarel (2 patches)
- Map VID 0 to untagged TT VLAN, by Sven Eckelmann
- Update MAINTAINERS/mailmap e-mail addresses, by the respective authors
(4 patches)
- netlink: reduce duplicate code by returning interfaces,
by Linus Lüssing
* tag 'batadv-next-pullrequest-20250117' of git://git.open-mesh.org/linux-merge:
batman-adv: netlink: reduce duplicate code by returning interfaces
MAINTAINERS: mailmap: add entries for Antonio Quartulli
mailmap: add entries for Sven Eckelmann
mailmap: add entries for Simon Wunderlich
MAINTAINERS: update email address of Marek Linder
batman-adv: Map VID 0 to untagged TT VLAN
batman-adv: Don't keep redundant TT change events
batman-adv: Remove atomic usage for tt.local_changes
batman-adv: Reorder includes for distributed-arp-table.c
batman-adv: Start new development cycle
====================
Link: https://patch.msgid.link/20250117123910.219278-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: Add new VID/PID 13d3/3610 for MT7922
- btusb: Add new VID/PID 13d3/3628 for MT7925
- btusb: Add MT7921e device 13d3:3576
- btusb: Add RTL8851BE device 13d3:3600
- btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x
- btusb: add sysfs attribute to control USB alt setting
- qca: Expand firmware-name property
- qca: Fix poor RF performance for WCN6855
- L2CAP: handle NULL sock pointer in l2cap_sock_alloc
- Allow reset via sysfs
- ISO: Allow BIG re-sync
- dt-bindings: Utilize PMU abstraction for WCN6750
- MGMT: Mark LL Privacy as stable
* tag 'for-net-next-2025-01-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (23 commits)
Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync
Bluetooth: qca: Fix poor RF performance for WCN6855
Bluetooth: Allow reset via sysfs
Bluetooth: Get rid of cmd_timeout and use the reset callback
Bluetooth: Remove the cmd timeout count in btusb
Bluetooth: Use str_enable_disable-like helpers
Bluetooth: btmtk: Remove resetting mt7921 before downloading the fw
Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc
Bluetooth: btusb: Add RTL8851BE device 13d3:3600
dt-bindings: bluetooth: Utilize PMU abstraction for WCN6750
Bluetooth: btusb: Add MT7921e device 13d3:3576
Bluetooth: btrtl: check for NULL in btrtl_setup_realtek()
Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name()
Bluetooth: qca: Expand firmware-name to load specific rampatch
Bluetooth: qca: Update firmware-name to support board specific nvm
dt-bindings: net: bluetooth: qca: Expand firmware-name property
Bluetooth: btusb: Add new VID/PID 13d3/3628 for MT7925
Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922
Bluetooth: btusb: add sysfs attribute to control USB alt setting
Bluetooth: btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x
...
====================
Link: https://patch.msgid.link/20250117213203.3921910-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo says:
====================
wireless-next patches for v6.14
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
* tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits)
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
wifi: wilc1000: unregister wiphy only after netdev registration
wifi: cfg80211: adjust allocation of colocated AP data
wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf()
wifi: ath12k: fix key cache handling
wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function
wifi: ath12k: Remove ath12k_get_num_hw() helper function
wifi: ath12k: Refactor the ath12k_hw get helper function argument
wifi: ath12k: Refactor ath12k_hw set helper function argument
wifi: mt76: mt7996: add implicit beamforming support for mt7992
wifi: mt76: mt7996: fix beacon command during disabling
wifi: mt76: mt7996: fix ldpc setting
wifi: mt76: mt7996: fix definition of tx descriptor
wifi: mt76: connac: adjust phy capabilities based on band constraints
wifi: mt76: mt7996: fix incorrect indexing of MIB FW event
wifi: mt76: mt7996: fix HE Phy capability
wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU
wifi: mt76: mt7996: add max mpdu len capability
wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain
...
====================
Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds with gcc 14.2.1 report:
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:4193:32: error: ‘%s’ directive output may be truncated writing up to 31 bytes into a region of size 27 [-Werror=format-truncation=]
4193 | "/pkg %s", buf);
It's upset that we let buf be full length but then we use 5
characters for "/pkg ".
The builds is also clear with clang version 19.1.5 now.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250117183726.1481524-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of SYN + MPC retransmissions before falling back to TCP was
fixed to 2. This is certainly a good default value, but having a fixed
number can be a problem in some environments.
The current behaviour means that if all packets are dropped, there will
be:
- The initial SYN + MPC
- 2 retransmissions with MPC
- The next ones will be without MPTCP.
So typically ~3 seconds before falling back to TCP. In some networks
where some temporally blackholes are unfortunately frequent, or when a
client tries to initiate connections while the network is not ready yet,
this can cause new connections not to have MPTCP connections.
In such environments, it is now possible to increase the number of SYN
retransmissions with MPTCP options to make sure MPTCP is used.
Interesting values are:
- 0: the first retransmission will be done without MPTCP options: quite
aggressive, but also a higher risk of detecting false-positive
MPTCP blackholes.
- >= 128: all SYN retransmissions will keep the MPTCP options: back to
the < 6.12 behaviour.
The default behaviour is not changed here.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250117-net-next-mptcp-syn_retrans_before_tcp_fallback-v1-1-ab4b187099b0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean says:
====================
ethtool get_ts_stats() for DSA and ocelot driver
After a recent patch set with fixes and general restructuring, Jakub asked
for the Felix DSA driver to start reporting standardized statistics
for hardware timestamping:
https://lore.kernel.org/netdev/20241207180640.12da60ed@kernel.org/
Testing follows the same procedure as in the aforementioned series, with PTP
packet loss induced through taprio:
$ ethtool -I --show-time-stamping swp3
Time stamping parameters for swp3:
Capabilities:
hardware-transmit
software-transmit
hardware-receive
software-receive
software-system-clock
hardware-raw-clock
PTP Hardware Clock: 1
Hardware Transmit Timestamp Modes:
off
on
onestep-sync
Hardware Receive Filter Modes:
none
ptpv2-l4-event
ptpv2-l2-event
ptpv2-event
Statistics:
tx_pkts: 14591
tx_lost: 85
tx_err: 0
v1: https://lore.kernel.org/20241213140852.1254063-1-vladimir.oltean@nxp.com/
====================
Link: https://patch.msgid.link/20250116104628.123555-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an u64 hardware timestamping statistics structure for each ocelot
port. Export a function from the common switch library for reporting
them to ethtool. This is called by the ocelot switchdev front-end for
now.
Note that for the switchdev driver, we report the one-step PTP packets
as unconfirmed, even though in principle, for some transmission
mechanisms like FDMA, we may be able to confirm transmission and bump
the "pkts" counter in ocelot_fdma_tx_cleanup() instead. I don't have
access to hardware which uses the switchdev front-end, and I've kept the
implementation simple.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250116104628.123555-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For packets with two-step timestamp requests, the hardware timestamp
comes back to the driver through a confirmation mechanism of sorts,
which allows the driver to confidently bump the successful "pkts"
counter.
For one-step PTP, the NIC is supposed to autonomously insert its
hardware TX timestamp in the packet headers while simultaneously
transmitting it. There may be a confirmation that this was done
successfully, or there may not.
None of the current drivers which implement ethtool_ops :: get_ts_stats()
also support HWTSTAMP_TX_ONESTEP_SYNC or HWTSTAMP_TX_ONESTEP_SYNC, so it
is a bit unclear which model to follow. But there are NICs, such as DSA,
where there is no transmit confirmation at all. Here, it would be wrong /
misleading to increment the successful "pkts" counter, because one-step
PTP packets can be dropped on TX just like any other packets.
So introduce a special counter which signifies "yes, an attempt was made,
but we don't know whether it also exited the port or not". I expect that
for one-step PTP packets where a confirmation is available, the "pkts"
counter would be bumped.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250116104628.123555-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata says:
====================
mlxsw: Move Tx header handling to PCI driver
Amit Cohen writes:
Tx header should be added to all packets transmitted from the CPU to
Spectrum ASICs. Historically, handling this header was added as a driver
function, as Tx header is different between Spectrum and Switch-X.
From May 2021, there is no support for SwitchX-2 ASIC, and all the relevant
code was removed.
For now, there is no justification to handle Tx header as part of
spectrum.c, we can handle this as part of PCI, in skb_transmit().
This change will also be useful when XDP support will be added to mlxsw,
as for XDP_TX and XDP_REDIRECT actions, Tx header should be added before
transmitting the packet.
Patch set overview:
Patches #1-#2 add structure to store Tx header info and initialize it
Patch #3 moves definitions of Tx header fields to txheader.h
Patch #4 moves Tx header handling to PCI driver
Patch #5 removes unnecessary attribute
====================
Link: https://patch.msgid.link/cover.1737044384.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tx header should be added to all packets transmitted from the CPU to
Spectrum ASICs. Historically, handling this header was added as a driver
function, as Tx header is different between Spectrum and Switch-X. See
SwitchX implementation in commit 31557f0f97 ("mlxsw: Introduce
Mellanox SwitchX-2 ASIC support"). From May 2021, there is no support
for SwitchX-2 ASIC, and all the relevant code was removed.
For now, there is no justification to handle Tx header as part of
spectrum.c, we can handle this as part of PCI, in skb_transmit().
A future patch set will add support for XDP in mlxsw driver, to support
XDP_TX and XDP_REDIRECT actions, Tx header should be added before
transmitting the packet. As preparation for this, move Tx header handling
to PCI driver, so then XDP code will not have to call API from spectrum.c.
This also improves the code as now Tx header is pushed just before
transmitting, so it is not done from many flows which might miss something.
Note that for PTP, we should configure Tx header differently, use the
fields from mlxsw_txhdr_info to configure the packets correctly in PCI
driver. Handle VLAN tagging in switch driver, verify that packet which
should be transmitted as data is tagged, otherwise, tag it.
Remove the calls for thxdr_construct() functions, as now this is done as
part of skb_transmit().
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/293a81e6f7d59a8ec9f9592edb7745536649ff11.1737044384.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A next patch will construct Tx header as part of pci.c. The switch driver
(mlxsw_spectrum.ko) should encapsulate all the differences between the
different ASICs and the bus driver (mlxsw_pci.ko) should remain unaware.
As preparation, add the relevant info as part of mlxsw_txhdr_info
structure, so later bus driver will merely construct the Tx header based on
information passed from the switch driver.
Most of the packets are transmitted as control packets, but PTP packets in
Spectrum-2 and Spectrum-3 should be handled differently. The driver
transmits them as data packets, and the default VLAN tag (4095) is added if
the packet is not already tagged.
Extend PTP operations to store a boolean which indicates whether packets
should be transmitted as data packets. Set it for Spectrum-2 and
Spectrum-3 only. Extend mlxsw_txhdr_info to store fields which will be used
later to construct Tx header. Initialize such fields according to the new
boolean which is stored in PTP operations.
Note that for now, mlxsw_txhdr_info structure is initialized, but not used,
a next patch will use it.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/efcaacd4bedef524e840a0c29f96cebf2c4bc0e0.1737044384.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlxsw_tx_info structure is used to store information that is needed to
process Tx completions when Tx time stamps are requested. A next patch
will move Tx header handling from spectrum.c to pci.c. For that, some
additional fields which are related to Tx should be passed to pci driver.
As preparation, create an extended structure, called mlxsw_txhdr_info,
and store mlxsw_tx_info inside. The new fields should not be added to
mlxsw_tx_info structure as it is stored in the SKB control block which is
of limited size.
The next patch will extend the new structure with some fields which are
needed in order to construct Tx header.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/93aed1961f046f79f46869bab37a3faa5027751d.1737044384.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shifting dest_attr->vport.vhca_id << 16 results in a promotion from an
unsigned 16 bit integer to a 32 bit signed integer, this is then sign
extended to a 64 bit unsigned long on 64 bitarchitectures. If vhca_id is
greater than 0x7fff then this leads to a sign extended result where all
the upper 32 bits of idx are set to 1. Fix this by casting vhca_id
to the same type as idx before performing the shift.
Fixes: 8e2e08a6d1 ("net/mlx5: fs, add support for dest vport HWS action")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Moshe Shemesh <moshe@nvidia.com>
Link: https://patch.msgid.link/20250116181700.96437-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing error message ("Invalid qdisc name") is confusing
because it suggests that there is no qdisc with the given name. In
fact, the name does refer to a valid qdisc, but it doesn't match
the kind of an existing qdisc being modified or replaced. The
new error message provides more detail to eliminate confusion.
Signed-off-by: John Ousterhout <ouster@cs.stanford.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20250116195642.2794-1-ouster@cs.stanford.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit b9d5f5711d ("selftests: net: increase the delay for relative
cmsg_time.sh test") widened the accepted value range 8x but we still
see flakes (at a rate of around 7%).
Return XFAIL for the most timing sensitive test on slow machines.
Before:
# ./cmsg_time.sh
Case UDPv4 - TXTIME rel returned '8074us - 7397us < 4000', expected 'OK'
FAIL - 1/36 cases failed
After:
# ./cmsg_time.sh
Case UDPv4 - TXTIME rel returned '1123us - 941us < 500', expected 'OK' (XFAIL)
Case UDPv6 - TXTIME rel returned '1227us - 776us < 500', expected 'OK' (XFAIL)
OK
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250116020105.931338-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reduce duplicate code by using netlink helpers which return the
soft/hard interface directly. Instead of returning an interface index
which we are typically not interested in.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
