In case the KDMA fails scrubbing the DCCMs (following a soft-reset
upon device release), the driver will only print failure until reset
flow ends, rather than escalating it into a hard-reset.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Since hw_fini return error code for failure indication, we should
check its return value. Currently it might only fail upon soft-reset
from hl_device_reset. Later patch will add hw_fini failure in case of
polling timeout in hard-reset.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
is_idle() was too long, so break it up for readability.
In addition, we can now use the new sub-routines from other places.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Compute driver threads names will start with hlX-*, when X is the
device id.
This will help distinguish them from the NIC thread names.
Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add a helper function to search the vm hash for a node with a given
virtual address.
As opposed to the current code, this function explicitly returns NULL
when no node is found, instead of basing on the loop cursor object's
value.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
'irq_handler' in gaudi2_enable_msix(), is just assigned with a function
name and then used when calling request_threaded_irq().
Remove the variable and use the function name directly as an argument.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
smatch reports
drivers/accel/habanalabs/common/device.c:2619:6: warning:
symbol 'hl_capture_hw_err' was not declared. Should it be static?
drivers/accel/habanalabs/common/device.c:2641:6: warning:
symbol 'hl_capture_fw_err' was not declared. Should it be static?
both are only used in device.c, so they should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Building with clang W=2 has several similar warnings
drivers/accel/habanalabs/common/decoder.c:46:51: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static void
dec_error_intr_work(struct hl_device *hdev, u32 base_addr, u32 core_id)
^
drivers/accel/habanalabs/common/security.h:13:26: note: previous declaration is here
extern struct hl_device *hdev;
^
There is no global definition of hdev, so the extern is not needed.
Searched with
grep -r '^struct' . | grep hl_dev
Change to an forward decl to resolve these issues
drivers/accel/habanalabs/common/mmu/../security.h:133:40: error: ‘struct hl_device’ declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
133 | bool (*skip_block_hook)(struct hl_device *hdev,
| ^~~~~~~~~
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The cpu accessible dma allocations use the gen_pool api which actually
does not allocate new memory from the system but manages memory already
allocated before. When tracing this together with real dma
allocation/free it cause confusing logs like a '0' dma address and
a cpu address appearing twice etc.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
in the out_err flow, combine the two cases of soft-reset since
they have mostly common code. In addition unlock reset_info.lock
after touching reset count.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
In order to allow TPC engines to raise an assert, we must expose
the relevant MSIX interrupt to the user so he will configure the engine
correctly. In addition, we implement the corresponding interrupt
handler that will notify the user upon such an event.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
In order for interrupt timestamp to be more accurate we should
capture it during the interrupt handling rather than in threaded
irq context.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
We prefer not to handle the user interrupt job inside the interrupt
context. Instead, use threaded IRQ to handle the user interrupts.
This will allow to avoid disabling interrupts when the user process
registers for a new event and to avoid long handling inside an
interrupt.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
The graceful reset mechanism is currently enabled only for reset
requests that will end up with hard-reset.
In future, reset requests due to errors in some device engines, are
going to be modified to request compute-reset, as the much longer
hard-reset is not really needed there.
To allow it, enable graceful reset also for compute-reset, and reset
after user releases the device won't be escalated to hard-reset in those
cases.
If watchdog expires and user didn't release the device, hard-reset will
be initiated in any case.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
In case a compute reset has failed or a request for a hard reset has
just arrived, then we escalate current reset procedure from compute
to hard-reset.
In such a case, the FW should be aware of the updated error cause,
and if LKD is the one who performs the reset (rather than the FW),
then we ask the FW to disable PCI access.
We would also like to have relevant debug info and therefore
we print the currently escalating reset type.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
In order for engine cores to raise interrupts towards FW, They need
to know which register the event data should be written to.
Hence, we forward the relevant scratchpad register received during
dynamic regs handshake with FW.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Enhance the existing user notifications by adding a HW and FW critical
event bits to be used when a HW or FW event occur that requires
both SW abort and hard-resetting the chip.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
When user closes the compute device file descriptor without closing a
dma-buf file descriptor, the device will be considered as in use,
leading to hard reset and killing the user process, to ensure the
release of the dma-buf.
Same thing will happen if user first releases the compute device file
and only then the dma-buf.
The implication of this is the duration of hard reset, during which the
device cannot be reacquired.
Moreover, this behavior adds a constraint on a user process to follow
this order of release operations.
To avoid killing the user process and to remove this constraint, enforce
the correct order of release operations inside the driver, by
incrementing the device file refcount for any dma-buf until it is
released.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
When user closes the device file descriptor, it is checked whether the
device is still in use, and a message is printed if it is.
To make this message more informative, add to this print also the reason
due to which the device is considered as in use.
The possible reasons which are checked for now are active CS and
exported dma-buf.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
PSOC RAZWI handling code did not took into account single router that
supports several initiators with different XY coordinates. Also, it
ignored XY_HI coordinate. This caused 2 problems:
1. RAZWI handle ignored some initiators.
2. When getting PSOC RAZWI from some routers, there was a lot of
possible engines which could have caused the RAZWI.
Fixed the above issue by handling PSOC RAZWI with both low and high
XY coordinates. This way driver supports all initiators and in
the worst case there are not more than 2 possible engines for RAZWI.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
The same mutex lock/unlock and counter decrementing in
hl_release_dmabuf() is already done in the memhash_node_export_put()
helper function.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
It is more concise than to pass it to device init. Once we will add the
accel class, then we won't need to change the function signatures.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Move the cdev creation code from the main hdev init function to
a separate function. This will make the code more readable once we
add the accel registration code (instead/in addition to legacy
cdev).
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
RAZWI handling routine is called from most EQ events,
no matter if a RAZWI happens or not.
This fix is added to verify the handler is called only if
a real RAZWI indication in HW has been detected.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Currently we support scenarios where a timestamp registration request
of a certain offset is received during the interrupt handling of the
same offset. In this case we give a grace period of up to 100us for
the interrupt handler to finish.
It seems that sometimes the interrupt handling takes more than expected,
and therefore this path should be optimized. Until that happens, let's
increase the grace period in order not to reach timeout which will
cause user call to be rejected.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
drm-misc-next for v6.4-rc1:
Note: Only changes since pull request from 2023-02-23 are included here.
UAPI Changes:
- Convert rockchip bindings to YAML.
- Constify kobj_type structure in dma-buf.
- FBDEV cmdline parser fixes, and other small fbdev fixes for mode
parsing.
Cross-subsystem Changes:
- Add Neil Armstrong as linaro maintainer.
- Actually signal the private stub dma-fence.
Core Changes:
- Add function for adding syncobj dep to sched_job and use it in panfrost, v3d.
- Improve DisplayID 2.0 topology parsing and EDID parsing in general.
- Add a gem eviction function and callback for generic GEM shrinker
purposes.
- Prepare to convert shmem helper to use the GEM reservation lock instead of own
locking. (Actual commit itself got reverted for now)
- Move the suballocator from radeon and amdgpu drivers to core in preparation
for Xe.
- Assorted small fixes and documentation.
- Fixes to HPD polling.
- Assorted small fixes in simpledrm, bridge, accel, shmem-helper,
and the selftest of format-helper.
- Remove dummy resource when ttm bo is created, and during pipelined
gutting. Fix all drivers to accept a NULL ttm_bo->resource.
- Handle pinned BO moving prevention in ttm core.
- Set drm panel-bridge orientation before connector is registered.
- Remove dumb_destroy callback.
- Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's.
- Add atomic enable_plane callback, use it in ast, mgag200, tidss.
Driver Changes:
- Use drm_gem_objects_lookup in vc4.
- Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau.
- Allow virtio KMS to be disabled and compiled out.
- Add Radxa 8/10HD, Samsung AMS495QA01 panels.
- Fix ivpu compiler errors.
- Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem,
nouveau, vc4.
- Assorted cleanups, simplifications and fixes to vmwgfx.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ac1f5186-54bb-02f4-ac56-907f5b76f3de@linux.intel.com
Pull tpm fixes from Jarkko Sakkinen:
"Two additional bug fixes for v6.3"
* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: disable hwrng for fTPM on some AMD designs
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS. This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.
This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d5 ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.
So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions. As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.
It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.
Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it. If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.
Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439d5 ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Pull xfs fixes from Darrick Wong:
- Fix a crash if mount time quotacheck fails when there are inodes
queued for garbage collection.
- Fix an off by one error when discarding folios after writeback
failure.
* tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix off-by-one-block in xfs_discard_folio()
xfs: quotacheck failure can race with background inode inactivation
Pull staging driver fixes and removal from Greg KH:
"Here are four small staging driver fixes, and one big staging driver
deletion for 6.3-rc2.
The fixes are:
- rtl8192e driver fixes for where the driver was attempting to
execute various programs directly from the disk for unknown reasons
- rtl8723bs driver fixes for issues found by Hans in testing
The deleted driver is the removal of the r8188eu wireless driver as
now in 6.3-rc1 we have a "real" wifi driver for one that includes
support for many many more devices than this old driver did. So it's
time to remove it as it is no longer needed. The maintainers of this
driver all have acked its removal. Many thanks to them over the years
for working to clean it up and keep it working while the real driver
was being developed.
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: delete driver
staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
staging: rtl8723bs: Fix key-store index handling
staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
Pull x86 fix from Borislav Petkov:
"A single erratum fix for AMD machines:
- Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No
impact to anything as those machines will fallback to XSAVEC which
is equivalent there"
* tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Disable XSAVES on AMD family 0x17
