On create AH, first check if the AH cache entry already exists and if
so, returns the already stored AH number. If the entry doesn't exist,
the driver creates it and calls the device to create the AH. A per-entry
mutex serializes concurrent device commands on the same AH cache entry,
ensuring only one thread issues the device create while others wait and
reuse the result. If the device create fails, the entry's user count
remains zero so subsequent threads will retry the device create.
On destroy AH, the user count is decremented under the entry mutex. If
it reaches zero, the driver issues the device destroy command. After
the device destroy completes, it removes the entry from the hashtable
and frees it if no other references exist. If new users arrived during
the destroy, the entry remains in the hashtable for reuse.
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://patch.msgid.link/20260706170008.1039417-3-ynachum@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
New EFA devices don't support the creation of multiple address handles
to the same remote on the same PD.
To overcome this limitation, introduce an AH cache rhashtable which will
store the user refcounts of the same AH creation on the same PD and will
allow the driver to manage AH reuse. The hashtable key is the
combination of PD and GID. Add initialization and teardown logic for the
rhashtable.
Each entry holds a refcount to manage the entry lifetime in the
hashtable and a user count that indicates how many users are using the
address handle.
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://patch.msgid.link/20260706170008.1039417-2-ynachum@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In many cases, a driver op accepts no input data and provides
no response. This helper can be used in those handlers to
adhere to the uAPI forward/backward compat rules by failing
early if invalid udata is provided (whether input or output).
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260702170652.4159201-2-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
__wait_for_resp() documents that it returns a non-zero error when a
firmware command does not complete, and bng_re_rcfw_send_message() already
marks the firmware as stalled when the helper returns -ENODEV.
However, the helper ignores wait_event_timeout() expiry. If the response
slot remains in use after the timeout and after the polled CREQ service
attempt, the loop starts another full timeout period and can repeat
forever.
Return -ENODEV after a timed out wait that still has no response. The
existing caller then marks FIRMWARE_STALL_DETECTED and returns
-ETIMEDOUT to the command issuer.
Fixes: 53c6ee7d7f ("RDMA/bng_re: Enable Firmware channel and query device attributes")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260625003614.27515-1-pengpeng@iscas.ac.cn
Reviewed-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The driver defines two device classes: "hfi1" (mode 0600) and
"hfi1_user" (mode 0666), selected by a user_accessible parameter to
hfi1_cdev_init(). The only caller always passes user_accessible=true,
so the "hfi1" class is registered but never used.
The 0600 class was originally used by the diagnostics UI char device
(hfi1_ui*), but that was removed over 10 years ago in commit
7312f29d8e ("IB/hfi1: Remove UI char device"). The class and the
user_accessible parameter were left behind.
Remove the unused class and the user_accessible parameter.
Now that there's only one class, it might make sense to change its name
from "hfi1_user" to just "hfi1", but not knowing whether userspace would
mind, keep the name as is.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://patch.msgid.link/20260701150510.384858-1-mschmidt@redhat.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The IBTA Software Transport Verbs specification requires the QP,
Memory Window and Memory Region for a Bind Memory Window operation
to belong to the same HCA and protection domain.
rxe only checked the QP and MW protection domain for type 2 MWs.
Move the QP/MW PD check to the common bind path and also reject
binding an MW to an MR from a different PD.
Invalid bind requests continue to fail with IB_WC_MW_BIND_ERR.
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Zhiwei Zhang <202275009@qq.com>
Link: https://patch.msgid.link/tencent_FD4FB25AA4FFA845E63F5AC36CF4A46CDC0A@qq.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The irdma driver currently issues an unconditional PF reset whenever the
HMC Error interrupt (PFINT_OICR bit 26) fires:
if (event->reg & IRDMAPFINT_OICR_HMC_ERR_M) {
ibdev_err(&iwdev->ibdev, "HMC Error\n");
iwdev->rf->reset = true;
}
request_reset() issues an IIDC_PFR to ice. In practice a single HMC_ERR
can trigger cascading PF resets, IOMMU faults during teardown, and
teardown of every RDMA connection on the device.
i40e handles the identically-named interrupt by reading
PFHMC_ERRORINFO and PFHMC_ERRORDATA and logging them without touching
device state; see commit 9c010ee0ea ("i40e: Suppress HMC error to
Interrupt message level") which removed the reset as "not necessary".
This patch mirrors that handling on irdma.
With this change, repeated HMC_ERR no longer produces a reset storm and
RDMA traffic on the device continues uninterrupted.
Signed-off-by: Seyeong Kim <seyeong.kim@canonical.com>
Link: https://patch.msgid.link/20260619050044.1807044-1-seyeong.kim@canonical.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
User QP/CQ/SRQ rings are registered with the normal reg_mr
mechanism prior to creating the actual QP/CQ/SRQ object. In
order to prevent userspace from deregistering these special MRs
while the child object still exists, a refcount will be used.
This commit adds the refcount and logic to reject a dereg_mr
with active references. Subsequent commits will add logic to
bump this refcount when the user QP/CQ/SRQ objects are created.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260618201458.875740-3-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Remove extra asterisk to avoid the following kernel-doc warning:
Warning: drivers/infiniband/hw/mlx5/umr.c:986 This comment starts with '/**',
but isn't a kernel-doc comment. Refer to Documentation/doc-guide/kernel-doc.rst
Fixes: e73242aa14 ("RDMA/mlx5: Optimize DMABUF mkey page size")
Link: https://patch.msgid.link/r/20260629-kdoc-fix-v1-1-735a90dede7f@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The original commit missed that three drivers (mthca, irdma, siw) have UHW
data associated with reg_mr that cannot be passed through the ioctl. They
also assume that the udata cannot be NULL, so failing to pass a valid
udata can trigger a NULL udata crash in those drivers.
This never happens in real systems since in rdma-core ibv_cmd_reg_mr_ex()
does not accept a udata and those three drivers don't use it, however a
malicious userspace could trigger it.
Cc: stable@vger.kernel.org
Fixes: 5b2e45049d ("IB/core: Add UVERBS_METHOD_REG_MR on the MR object")
Reported-by: Jacob Moroni <jmoroni@google.com>
Closes: https://lore.kernel.org/all/CAHYDg1TOGxRGZrS69d4Y--Shj_DZv0nJuM73iHUBwBM70g_t3Q@mail.gmail.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add RDMA_NLDEV_ATTR_RES_SUMMARY_ENTRY_MAX netlink attribute to expose
device resource limits (max_qp, max_cq, max_mr, max_pd, max_srq) in
the resource summary alongside the existing current count. This allows
userspace tools like iproute2's rdma to display resource usage in
curr/max format.
Expected output from "rdma resource show":
Before: 0: mlx5_0: qp 123 cq 45 mr 200 pd 10
After: 0: mlx5_0: qp 123/131072 cq 45/65536 mr 200/1000000 pd 10/32768
In JSON output, both "curr" and "max" fields will be provided so that
scripts can compute percentages if needed.
The new attribute is optional and backward compatible - old userspace
tools will simply ignore it.
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Link: https://patch.msgid.link/20260615003646.168704-1-cui.tao@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Pull NTB updates from Jon Mason:
"An EPF bug fix to prevent an invalid unmap during device removal,
along with documentation fixes and minor AMD driver cleanups"
* tag 'ntb-7.2' of https://github.com/jonmason/ntb:
ntb: amd: Use named initializer for pci_device_id::driver_data
NTB: fix kernel-doc warnings in ntb.h
NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR
ntb_hw_amd: Fix incorrect debug message in link disable path
Pull more input updates from Dmitry Torokhov:
- Updates to Synaptics RMI4 driver to fix potential OOB accesses in F30
and F3A keymap handling
- A workaround in Synaptics RMI4 to tolerate buggy firmware on some
touchpads (e.g. ThinkPad T14 Gen 1) that report incomplete register
descriptor structures, preventing probe failures
- A revert of an incorrect register descriptor address calculation in
Synaptics RMI4 driver
- A fix for a regression in HP GSC PS/2 (gscps2) driver where the
receive buffer write index was not advanced, leaving keyboard and
mouse unusable.
* tag 'input-for-v7.2-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: gscps2 - advance receive buffer write index
Input: rmi4 - tolerate short register descriptor structure
Revert "Input: rmi4 - fix register descriptor address calculation"
Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count
Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count
Pull pwm fixes from Uwe Kleine-König:
"Two more fixes that I managed to put into the public branch merged
into next before my first pull request but missed to include them in
it.
The first change is a relevant change that fixes misconfigurations due
to a variable overflow. The second is only cosmetic but very obviously
an improvement"
* tag 'pwm/for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: rzg2l-gpt: Add missing newlines to dev_err_probe() messages
pwm: rzg2l-gpt: Fix period_ticks type from u32 to u64
Pull more fbdev updates from Helge Deller:
"Fixes for generic fbdev & fbcon code for the handling of modelists
and preventing a potential NULL ptr dereference in the console code.
Fix missed cleanups in the error path of various fbdev drivers.
And Uwe Kleine-König contributed a cleanup patch to use named
initializers in the vga16fb driver"
* tag 'fbdev-for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var
fbcon: fix NULL pointer dereference for a console without vc_data
fbdev: fix use-after-free in store_modes()
fbdev: viafb: return an error when DMA copy times out
fbdev: goldfishfb: fail pan display on base-update timeout
fbdev: fbcon: fix out-of-bounds read in err_out of fbcon_do_set_font()
fbdev: pm2fb: unwind WC setup on probe failure
fbdev: vga16fb: Drop unused assignment of platform_device_id driver data
Pull sound fixes from Takashi Iwai:
"A collection of small bug fixes accumulated over the last week.
Most are device-specific fixes while there are a few core fixes as
well.
Here are the highlights:
ALSA Core:
- A fix for an uninitialised heap leak in ALSA sequencer core
- A fix for error handling/resource leak in compress-offload API
USB-audio:
- A teardown-ordering fix in USB MIDI 2.0 to prevent use-after-free
- Bounds and length checks for packet data in Native Instruments
caiaq / Traktor Kontrol input parsers
- Avoidance of expensive kobject path lookups in DualSense controller
matches
- Robustness/memory leak fixes for Qualcomm USB offload driver
- Focusrite Control Protocol (FCP) NULL-pointer dereference fix and a
new device quirk (ISA C8X)
- Device-specific quirks for Yamaha CDS3000 and SC13A
HD-Audio:
- A bunch of quirks and mute/mic-mute LED fixups for various laptops
(Acer, Clevo, Lenovo, HP)
ASoC & SoundWire:
- Avoid failing card registration if the device_link creation fails
- A workaround for SoundWire randconfig build failures by making
helper functions static inline
- Corrected MCLK reference validation for CS530x codecs
- Clean up of untested, problematic guard() macro replacements in
Rockchip SAI driver
- Fix for eDMA maxburst misalignment with channel count in Freescale
ASRC
- Miscellaneous hardware-specific fixes (qcom, rt5650, tlv320aic3x,
tas2781/3)
Others:
- Bounds and length checks for packet data in Apple iSight"
* tag 'sound-fix-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
ALSA: FCP: Fix NULL pointer dereference in interface lookup
ALSA: hda/realtek: Update Acer Nitro ANV15-41 quirk to enable mute LED
ASoC: fsl_asrc_dma: fix eDMA maxburst misalignment with channel count
ASoC: codecs: pcm512x: only print info once on no sclk
ASoC: tas2781: Update default register address to TAS2563
ALSA: firewire: isight: bound the sample count to the packet payload
ALSA: usb-audio: qcom: Free QMI handle
ALSA: hda: Add Lenovo Legion 7i 16IAX7 17AA3874 quirk
ALSA: usb-audio: avoid kobject path lookup in DualSense match
ALSA: hda/realtek: Add quirk for Acer Nitro ANV15-41
ASoC: soc-core: Don't fail if device_link could not be created
ASoC: rockchip: rockchip_sai: #include <linux/platform_device.h> explicitly
ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup()
ASoC: rt5575: Use __le32 for SPI burst write address
ASoC: tas2783: Update loaded firmware names to linux-firmware 20260519
ASoC: SDCA: Validate written enum value in ge_put_enum_double()
ASoC: realtek: Add back local call to sdw_show_ping_status()
ASoC: ti: Add back local call to sdw_show_ping_status()
ASoC: max98373: Add back local call to sdw_show_ping_status()
ASoC: es9356: Add back local call to sdw_show_ping_status()
...
Pull RTC updates from Alexandre Belloni:
"Most of the work and improvements are for features of the m41t93.
The ds1307 also gets support for OSF (Oscillator Stop Flag) for
new variants.
The pcap driver is being removed as the Motorola EZX support was
removed a while ago.
Subsystem:
- add rtc_read_next_alarm() to read next expiring timer
Drivers:
- ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for
ds1307, fix wday for rx8130
- m41t93: DT support, alarm, clock provider, watchdog support
- mv: add suspend/resume support for wakeup
- pcap: remove driver
- renesas-rtca3: many fixes"
* tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (36 commits)
rtc: ds1307: update reference to removed CONFIG_RTC_DRV_DS1307_HWMON
platform/x86: amd-pmc: Fix S0i3 wakeup with alarmtimer
rtc: s35390a: fix typo in comment
rtc: cmos: unregister HPET IRQ handler on probe failure
rtc: ds1307: Fix off-by-one issue with wday for rx8130
dt-bindings: rtc: ds1307: Add epson,rx8901
rtc: bq32000: add delay between RTC reads
rtc: m41t93: Add watchdog support
rtc: m41t93: Add square wave clock provider support
rtc: m41t93: Add alarm support
rtc: m41t93: migrate to regmap api for register access
rtc: m41t93: add device tree support
dt-bindings: rtc: Add ST m41t93
rtc: ds1307: add support for clock provider in ds1307
rtc: mv: add suspend/resume support for wakeup
rtc: aspeed: add AST2700 compatible
dt-bindings: rtc: add ASPEED AST2700 compatible
rtc: interface: fix typos in rtc_handle_legacy_irq() documentation
rtc: msc313: fix NULL deref in shared IRQ handler at probe
rtc: remove unused pcap driver
...
Pull fscrypt fixes from Eric Biggers:
- Fix a bug where in a specific edge case, file contents en/decryption
could be done with the wrong data unit size
- Fix the data structure used for keeping track of users that have
added an fscrypt key to be a simple list instead of a 'struct key'
keyring
This fixes issues such as a lockdep report found by syzbot and
possible unintended interactions with the keyctl() system calls
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: Replace mk_users keyring with simple list
fscrypt: Fix key setup in edge case with multiple data unit sizes
Commit 44f9200699 ("Input: gscps2 - use guard notation when
acquiring spinlock") moved the receive loop into gscps2_read_data()
and gscps2_report_data().
While moving the code, it preserved the writes to
buffer[ps2port->append], but omitted the following producer index
update from the original loop:
ps2port->append = (ps2port->append + 1) & BUFFER_SIZE;
As a result, append never advances. Since gscps2_report_data() only
reports bytes while act != append, the receive buffer always appears
empty and no keyboard or mouse data reaches the serio core.
Restore the omitted index update.
Fixes: 44f9200699 ("Input: gscps2 - use guard notation when acquiring spinlock")
Cc: stable@vger.kernel.org # 6.13+
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/460B5655BA580C60+20260624094739.850306-1-raoxu@uniontech.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some touchpads (e.g. ThinkPad T14 Gen 1) have buggy firmware that reports
a register descriptor structure size that is too small for the number of
registers it claims to have in the presence map. The remaining bytes in
the structure are 0, which with the new strict bounds checking causes the
parser to fail with -EIO, aborting the device probe.
Tolerate such short reads by dropping the remaining (unparseable or
0-size) registers from the list instead of failing the probe,
preventing the driver from trying to use them.
Fixes: 0adb483fbf ("Input: rmi4 - refactor register descriptor parsing")
Reported-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The register descriptor presence register is a packet register, which
means its bytes share a single RMI address. It does not occupy
consecutive addresses, and the register structure that follows it
is located at the next RMI address (presence_address + 1), not
(presence_address + presence_size).
Revert the incorrect address calculation introduced in commit
a98518e724.
Reported-by: "Barry K. Nathan" <barryn@pobox.com>
Tested-by: "Barry K. Nathan" <barryn@pobox.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The current list initialisation depends on the well hidden two zeros in
the PCI_VDEVICE macro. Instead use a named initialisation that is more
robust and easier to understand.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Correct a function name and function parameter name to avoid
kernel-doc warnings:
Warning: include/linux/ntb.h:575 expecting prototype for
ntb_default_port_count(). Prototype was for ntb_default_peer_port_count()
instead
Warning: include/linux/ntb.h:590 function parameter 'pidx' not
described in 'ntb_default_peer_port_number'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
When BAR_PEER_SPAD and BAR_CONFIG share one PCI BAR, the module teardown
path ends up calling pci_iounmap() on the same iomem with some offset,
which is unnecessary and triggers a kernel warning like the following:
Trying to vunmap() nonexistent vm area (0000000069a5ffe8)
WARNING: mm/vmalloc.c:3470 at vunmap+0x58/0x68, CPU#5: modprobe/2937
[...]
Call trace:
vunmap+0x58/0x68 (P)
iounmap+0x34/0x48
pci_iounmap+0x2c/0x40
ntb_epf_pci_remove+0x44/0x80 [ntb_hw_epf]
pci_device_remove+0x48/0xf8
device_remove+0x50/0x88
device_release_driver_internal+0x1c8/0x228
driver_detach+0x50/0xb0
bus_remove_driver+0x74/0x100
driver_unregister+0x34/0x68
pci_unregister_driver+0x34/0xa0
ntb_epf_pci_driver_exit+0x14/0xfe0 [ntb_hw_epf]
[...]
Fix it by unmapping only when PEER_SPAD and CONFIG use difference bars.
Cc: stable@vger.kernel.org
Fixes: e75d5ae8ab ("NTB: epf: Allow more flexibility in the memory BAR map method")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
amd_ntb_link_disable() prints "Enabling Link" which is misleading.
Update the message to reflect that the link is being disabled.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Pull drm fixes from Dave Airlie:
"These are just the fixes from our fixes branch, all pretty small and
scattered.
sysfb:
- drm/sysfb truncation and alignment fixes
edid:
- fix edid OOB read in tile parsing
- increase displayid topology id to correct size
nouveau:
- fix error handling paths in nouveau
amdxdna:
- get_bo_info fix
ivpu:
- fix leak when error handling in ivpu"
* tag 'drm-fixes-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel:
drm/sysfb: Avoid truncating maximum stride
drm/sysfb: Return errno code from drm_sysfb_get_visible_size()
drm/sysfb: Avoid possible truncation with calculating visible size
drm/sysfb: Do not page-align visible size of the framebuffer
drm/edid: fix OOB read in drm_parse_tiled_block()
drm/nouveau: fix reversed error cleanup order in ucopy functions
drm/nouveau/acr: fix missing nvkm_done() in error path of nvkm_acr_oneinit()
accel/amdxdna: Use caller client for debug BO sync
drm/displayid: fix Tiled Display Topology ID size
accel/ivpu: fix HWS command queue leak on registration failure
Pull drm merge window fixes from Dave Airlie:
"This is the merge window fixes from our next tree, i915/xe and amdgpu
make up all of it.
I've got a separate fixes pull from our fixes branch arriving after
this.
i915:
- Fix corrupted display output on GLK, #16209
- Add missing Spectre mitigation for parallel submit IOCTL
- MTL+ fix for DP resume
- clear CRTC blobs after dropping refs
- fix sharpness filter on DP MST
xe:
- Set TTM beneficial order to 9 in Xe
- Several error path cleanups
- Fix TDR for unstarted jobs on kernel queues
- Several TLB invalidation fixes related to suspending LR queues
- Some small RAS fixes
- Multi-queue suspend fix for LR queues
- Revert inclusion of NVL_S firmware
amdgpu:
- devcoredump fixes
- SMU15 fix
- Various irq put/get imbalance cleanup fixes
- 8K panel fix
- DCN3.5 fix
- lockdep fix
- Cleaner shader sysfs IB overflow fix
- Async flip fixes
- GET_MAPPING_INFO fix
- CP_GFX_SHADOW fix
- Ctx pstate handling fix
- GTT bo move handling fixes
- Old UVD BO placement fixes
- GC9 mode2 reset fix
- IH6.1 version fix
- Soft IH ring fix
amdkfd:
- Fix doorbell/mmio double unpin on free
- CRIU fixes
- SMI event fixes
- Sysfs teardown fix
- Various boundary checking fixes
- Various error checking fixes
- SVM fix"
* tag 'drm-next-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel: (52 commits)
drm/i915/cdclk: Fix up CDCLK_FREQ_DECIMAL without a full PLL re-enable
drm/i915/gem: Add missing nospec on parallel submit slot
drm/amdgpu: Use system unbound workqueue for soft IH ring
amdgpu/ih6.1: Fix minor version
drm/amdkfd: Use exclusive bounds for SVM split alignment checks
drm/amdgpu/gfx9: Fix Ring and IB test fail after mode2
drm/amdgpu/uvd: Fix forcing MSG, FB BOs into VCPU segment when it isn't at 0 (v2)
drm/amdgpu/uvd: Place VCPU BO only in VRAM for UVD 4.x and older
drm/amdgpu: Fix amdgpu_bo_move() when old_mem and new_mem are both GTT
drm/amdgpu: Respect placement requirements in amdgpu_gtt_mgr functions
drm/amdgpu: Fix context pstate override handling
drm/amdkfd: Use memdup_array_user to copy data from/to user space at kfd ioctls
drm/amdkfd: check find_first_zero_bit before __set_bit on kfd->doorbell_bitmap
drm/amdkfd: Let driver decide buffer size at AMDKFD_IOC_GET_DMABUF_INFO ioctl
drm/amdgpu: fix recursive ww_mutex acquire in amdgpu_devcoredump_format
drm/amdgpu: convert amdgpu_vm_lock_by_pasid() to drm_exec
drm/amdgpu: Don't use UTS_RELEASE directly
drm/amdkfd: Fix NULL deref during sysfs teardown
drm/amdgpu: validate CP_GFX_SHADOW chunk size in CS pass1
drm/amdgpu: check amdgpu_vm_bo_find() result in GET_MAPPING_INFO
...
Pull ceph updates from Ilya Dryomov:
"This adds support for manual client session reset in CephFS, allowing
operators to get out of tricky livelock situations involving caps and
file locks without evicting the problematic client instance on the MDS
side or rebooting the client node both of which can be disruptive"
* tag 'ceph-for-7.2-rc1' of https://github.com/ceph/ceph-client:
ceph: add manual reset debugfs control and tracepoints
ceph: add client reset state machine and session teardown
ceph: add diagnostic timeout loop to wait_caps_flush()
ceph: harden send_mds_reconnect and handle active-MDS peer reset
ceph: use proper endian conversion for flock_len in reconnect
ceph: convert inode flags to named bit positions and atomic bitops
rbd: switch to dynamic root device
Pull thermal control fixes from Rafael Wysocki:
"These fix a failure path in an Intel thermal driver and prevent
thermal testing module code from being executed after it has been
freed:
- Fix dangling resources on thermal_throttle_online() failure in the
Intel thermal_throttle driver (Ricardo Neri)
- Eliminate a possibility of running thermal testing module code
after that module has been removed (Rafael Wysocki)"
* tag 'thermal-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: testing: zone: Flush work items during cleanup
thermal: intel: Fix dangling resources on thermal_throttle_online() failure
Pull power management fixes from Rafael Wysocki:
"These fix the schedutil cpufreq governor and drop a bogus warning
from the cpuidle core:
- Remove a misguided warning along with an inaccurate comment
next to it from the cpuidle core (Rafael Wysocki)
- Clear need_freq_update as appropriate in the .adjust_perf()
path of the schedutil cpufreq governor to avoid calling
cpufreq_driver_adjust_perf() unnecessarily on every scheduler
utilization update (Zhongqiu Han)"
* tag 'pm-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: Allow exit latency to exceed target residency
cpufreq: schedutil: Fix uncleared need_freq_update on the .adjust_perf() path
Pull ACPI support fixes and cleanups from Rafael Wysocki:
"These fix assorted issues and do cleanups in the ACPI support code,
which includes a fix for tools build breakage related to strncpy()
removal:
- Unbreak ACPICA tools builds after switching over to using
strscpy_pad() that is kernel-specific (Rafael Wysocki)
- Fix module parameter file paths in comments in the ACPI code
managing the general sysfs attributes (Zenghui Yu)
- Update kerneldoc comments in the ACPI resource management code to
follow the common style (Andy Shevchenko)
- Fix inverted interface check in ipmi_bmc_gone() that may cause ACPI
IPMI interfaces to be mishandled (Xu Rao)
- Add __cpuidle annotation to idle state management functions related
to ACPI _LPI to avoid trace-induced RCU warnings (Li RongQing)"
* tag 'acpi-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor_idle: Mark LPI enter functions as __cpuidle
ACPICA: Unbreak tools build after switching over to strscpy_pad()
ACPI: IPMI: Fix inverted interface check in ipmi_bmc_gone()
ACPI: resource: Amend kernel-doc style
ACPI: sysfs: Fix path of module parameters in comments
Pull spi fixes from Mark Brown:
"A fairly unremarkable collection of fixes that came in over the
merge window, plus a new device ID for the DesignWare controller
in the StarFive JHB100 SoC.
There's a couple of core fixes included, one avoiding freeing an
empty resource in error handling cases and another which fixes a
NULL dereference which could be triggered by using an abnormal
device registration flow like driver_override"
* tag 'spi-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: imx: reconfigure for PIO when DMA cannot be started
spi: dw: Add support for snps,dwc-ssi-2.00a
spi: dt-bindings: snps,dw-apb-ssi: Add starfive,jhb100-spi
spi: rpc-if: Use correct device for hardware reinitialization on resume
spi: acpi: Free resource list at appropriate time
spi: dw: fix wrong BAUDR setting after resume
spi: uniphier: Fix completion initialization order before devm_request_irq()
spi: Add NULL check for spi_get_device_id() in spi_get_device_match_data()
Pull regulator fixes from Mark Brown:
"A couple of unremarkable driver specific fixes that came in during the
merge window"
* tag 'regulator-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: da9121: Use subvariant ids in the I2C table
regulator: pca9450: Correct default t_off_deb for PCA9451A/PCA9452
Pull regmap fix from Mark Brown:
"Ensure that we don't overwrite the error code when cleaning up a
failed cache initialisation, helping people debug issues if they
do arise"
* tag 'regmap-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regcache: Do not overwrite error code when finalizing cache after error
Merge a fix eliminating a possibility of running the thermal testing
module code after that module has been removed.
* thermal-testing:
thermal: testing: zone: Flush work items during cleanup
Merge a cpuidle core fix that removes a misguided warning along with an
inaccurate comment next to it.
* pm-cpuidle:
cpuidle: Allow exit latency to exceed target residency
Merge an update of comments regarding the ACPI sysfs code, a kernel-doc
style fixup update of ACPI resource management, and ACPI IPMI driver
fix, and an ACPI processor driver fix for 7.2-rc1:
- Fix module parameter file paths in comments in the ACPI code managing
the general sysfs attributes (Zenghui Yu)
- Update kerneldoc comments in the ACPI resource management code to
follow the common style (Andy Shevchenko)
- Fix inverted interface check in ipmi_bmc_gone() which may cause ACPI
IPMI interfaces to be mishandled (Xu Rao)
- Add __cpuidle to idle state management functions related to ACPI _LPI
to avoid trace-induced RCU warnings (Li RongQing)
* acpi-sysfs:
ACPI: sysfs: Fix path of module parameters in comments
* acpi-resource:
ACPI: resource: Amend kernel-doc style
* acpi-driver:
ACPI: IPMI: Fix inverted interface check in ipmi_bmc_gone()
* acpi-processor:
ACPI: processor_idle: Mark LPI enter functions as __cpuidle
Pull devicetree fixes from Rob Herring:
- Drop unnecessary type reference from khadas,mcu "fan-supply"
- Fix clocks in Renesas R-Mobile APE6 example
- Add missing Unisoc SC2730 PMIC regulators schema
- Fix Amlogic thermal example
- kernel-doc fix for of_map_id()
- Handle negative index in of_fwnode_get_reference_args()
* tag 'devicetree-fixes-for-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: mfd: khadas,mcu: Drop type reference from "fan-supply"
dt-bindings: clock: renesas: div6: Use ZT/ZTR trace clock in R-Mobile APE6 example
regulator: dt-bindings: Add Unisoc SC2730 PMIC
dt-bindings: thermal: amlogic: Correct 'reg' in the example
dt-bindings: thermal: amlogic: Fix missing header in the example
of: Fix RST inline emphasis warnings in of_map_id() kernel-doc
of: property: Fix of_fwnode_get_reference_args() with negative index
Pull LoongArch updates from Huacai Chen:
- Add THREAD_INFO_IN_TASK implementation
- Add build salt to the vDSO
- Add some BPF JIT inline helpers
- Update DTS for I2C clocks and clock-frequency
- Some bug fixes and other small changes
* tag 'loongarch-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Test jited inline of bpf_get_smp_processor_id() for LoongArch
selftests/bpf: Test jited inline of bpf_get_current_task() for LoongArch
selftests/bpf: Add __arch_loongarch to limit test cases for LoongArch
selftests/bpf: Add get_preempt_count() support for LoongArch
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K2000
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K1000
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K0500
LoongArch: BPF: Inline bpf_get_smp_processor_id() helper
LoongArch: BPF: Inline bpf_get_current_task/_btf() helpers
LoongArch: BPF: Fix off-by-one error in tail call
LoongArch: BPF: Fix outdated tail call comments
LoongArch: Add build salt to the vDSO
LoongArch: Fix nr passing in set_direct_map_valid_noflush()
LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect()
LoongArch: Move struct kimage forward declaration before use
LoongArch: Report dying CPU to RCU in stop_this_cpu()
LoongArch: Add PIO for early access before ACPI PCI root register
LoongArch: Add THREAD_INFO_IN_TASK implementation
Pull arm64 fixes from Will Deacon:
"Small crop of arm64 fixes for -rc1. We've got a build fix for a new
randconfig permutation, a fix for a long-standing truncation issue
with hardware watchpoints and a KVM initialisation fix for the newly
merged remapping of the kernel data and bss sections:
- Fix randconfig build failure due to missing include of asm/insn.h
- Reject unaligned hardware watchpoints which were silently being
truncated
- Fix crash in KVM initialisation by deferring the read-only
remapping of the kernel data and bss sections"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: Defer read-only remap of data/bss linear alias
arm64/hw_breakpoint: reject unaligned watchpoints that would truncate BAS
arm64: static_call: include asm/insns.h
Pull ecryptfs updates from Tyler Hicks:
"No functional changes, just code cleanups:
- replace kmalloc()/snprintf() with kasprintf()
- simplify code flow by removing an unnecessary variable"
* tag 'ecryptfs-7.2-rc1-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
ecryptfs: use kasprintf in ecryptfs_crypto_api_algify_cipher_name
ecryptfs: remove redundant variable found_auth_tok
