Introduce both helpers for ACL packet since:
both core and transport drivers extract the handle and data length
from its header in several places.
Both will be used later.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add btusb_prepare_reset() to do cleanup before a reset, and
apply it to btusb_mtk_reset() as well.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Both helpers currently take struct btusb_data *, which is private to
btusb.c, as parameter type as below:
int btusb_recv_event(struct btusb_data *data, struct sk_buff *skb)
int btusb_recv_acl(struct btusb_data *data, struct sk_buff *skb)
To allow vendor USB-transport-specific source files to share them as
well, change the type to struct hci_dev *.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Introduce hci_devcd_state_name() to describe the devcoredump state by a
string name instead of a plain number, for several reasons:
1) Applying it in coredump.c makes the devcoredump state in log messages
more readable than a plain number.
2) Transport drivers may need to show the devcoredump state name too.
3) In future, the universal state name could be notified to userspace
via uevent, allowing a universal application (e.g. a daemon) to be
developed to save the coredump, which is otherwise discarded by the
device coredump core after 5 minutes (DEVCD_TIMEOUT); see
nxp_coredump_notify().
Also drop a trailing space from two bt_dev_dbg() format strings while
applying it in coredump.c.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The modules rfcomm (BT_RFCOMM), bnep (BT_BNEP), hidp (BT_HIDP), and
bluetooth_6lowpan (BT_6LOWPAN) are dependent on the bluetooth module
(BT, tristate) only transitively through the boolean BT_BREDR for the
first three and through the boolean BT_LE for the bluetooth_6lowpan.
Therefore, the modules can be selected as built-in even if the BT=m.
The combination of BT=m and =y for the said modules leads to the kernel
build system silently ignoring those modules, without ever compiling
them as built-in or as loadable modules.
Add BT as a direct dependency to the Kconfig of rfcomm, bnep, hidp, and
bluetooth_6lowpan. The modules set to =y when BT=m will default to =m,
rather then getting silently ignored by the build system.
Signed-off-by: Iva Kasprzaková <iva@yenya.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In rsi_hci_attach(), ops->set_bt_context() stores the newly allocated
h_adapter into common->bt_adapter before hci_alloc_dev() and
hci_register_dev() are called. If either of these fails, h_adapter
is freed but common->bt_adapter remains a non-NULL dangling pointer.
This causes a deterministically reachable use-after-free when the
device operates in a BT+WiFi coexistence mode and CONFIG_RSI_COEX
is enabled. The following software-only trigger paths exist:
1. SDIO driver .remove (rsi_disconnect)
2. USB driver .disconnect (rsi_disconnect)
3. SDIO driver .shutdown (rsi_shutdown)
4. Hibernation .freeze (rsi_freeze)
All four paths check:
if (IS_ENABLED(CONFIG_RSI_COEX) && coex_mode > 1 && bt_adapter)
rsi_bt_ops.detach(bt_adapter); // use-after-free
coex_mode is set during rsi_91x_init(), before rsi_hci_attach() is
called, and is not cleared on attach failure. Since set_bt_context()
already wrote bt_adapter before the failure, the deinit paths see a
non-NULL dangling pointer and proceed to detach it.
Fix this by moving set_bt_context() after hci_register_dev() succeeds.
On failure paths bt_adapter stays NULL, and the deinit callers correctly
skip the detach call.
Signed-off-by: Chen Changcheng <chenchangcheng@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In the switch-case block for hardware variant detection, the
default case has an unreachable 'break' statement following
'goto exit_error'. Remove the dead code.
Signed-off-by: Chen Changcheng <chenchangcheng@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The macros below have different meanings even though they share the
same value 0xff:
HCI_VENDOR_PKT: HCI packet indicator or type
HCI_EV_VENDOR: event code of a VSE
This usage of HCI_VENDOR_PKT is wrongly checking an event code.
Fix by using HCI_EV_VENDOR for event code.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The macros below have different meanings even though they share the
same value 0xff:
HCI_VENDOR_PKT: HCI packet indicator or type
HCI_EV_VENDOR: event code of a VSE
These usages of HCI_VENDOR_PKT are wrongly checking an event code.
Fix by using HCI_EV_VENDOR for event code.
Also fix warning "CHECK: Unnecessary parentheses around comparison"
given by checkpatch.pl.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The macros below have different meanings even though they share the
same value 0xff:
HCI_VENDOR_PKT: HCI packet indicator or type
HCI_EV_VENDOR: event code of a VSE
This usage of HCI_VENDOR_PKT is wrongly checking an event code.
Fix by using HCI_EV_VENDOR for event code.
Also fix warning "CHECK: Unnecessary parentheses around comparison"
given by checkpatch.pl.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The HCI UART write worker assumes that a tty write callback returns a
value in the range from zero through the skb length. A negative value or
a value larger than the skb length is passed to accounting and skb_pull,
which can corrupt skb state.
Treat either return value as a transmit error and discard the skb.
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The BCSP transmit path reads an HCI command header when an extension
packet has only been tested for a nonzero length. Its LE configuration
packet handler also indexes bytes through offset seven without a length
check.
Validate the complete command and LE configuration packet headers
before accessing their fields.
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Marvell event handlers access the HCI event header, command
complete payload, and driver-specific event header before validating
that the received skb contains them. A truncated event can consequently
cause an out-of-bounds read.
Validate each header and the command-complete payload length before
dereferencing the corresponding fields.
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The USB receive path trusts the block header to contain the required
number of bytes and passes it to the reassembly routine. The routine
also trusts a malformed HCI packet type and can append more data than
the skb allocated from the advertised packet length. A malformed USB
transfer can therefore cause out-of-bounds reads or an skb tail
overwrite.
Validate block header availability, declared block size, packet type,
and reassembly tailroom. Drop the partial frame on an invalid block.
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The reset path had two concurrency holes. Both are reachable in
practice when btintel_pcie_hw_error() is invoked from the HCI rx
path while another reset is being requested or is already in
flight.
1. data->reset_type was a plain shared field. The hw_error path
wrote it BEFORE the test_and_set_bit(RECOVERY_IN_PROGRESS)
guard inside btintel_pcie_reset(), so a second hw_error could
clobber the type chosen by an earlier in-flight request:
CPU0 (reset_work) CPU1 (hw_error #2)
dev_data->reset_type = PLDR
T2: read reset_type
dev_data->reset_type = FLR
reset() test_and_set sees 1
-> drops, but type already
clobbered
The hdev->reset callback (.reset = btintel_pcie_reset,
invoked via the sysfs reset attribute
/sys/class/bluetooth/hciX/reset and from hci_cmd_timeout())
compounded this by not writing reset_type at all -- it
inherited whatever value a previous hw_error / resume() had
left, which could be PLDR.
2. btintel_pcie_dump_debug_registers() was called unconditionally
at the top of hw_error(). When reset_work was already running
pci_try_reset_function(), the BT MMIO window can read all-1s
or trigger AER for the duration of the FLR, polluting the
debug dump with no useful information.
Refactor the reset path to make RECOVERY_IN_PROGRESS the sole
serializer for both the type write and the work scheduling:
- Replace btintel_pcie_reset(hdev) with
btintel_pcie_request_reset(data, type). The helper takes the
desired reset variant as a parameter and writes
data->reset_type only after winning test_and_set_bit(); losers
return without touching the field, so concurrent triggers can
no longer clobber an in-flight reset's type. reset_work()'s
read of reset_type is now ordered after the bit transition via
schedule_work()'s memory barrier.
- Add a thin btintel_pcie_hci_reset() wrapper for the
hdev->reset callback (invoked via the sysfs reset attribute
/sys/class/bluetooth/hciX/reset and from hci_cmd_timeout())
that always requests FLR explicitly, so these paths no longer
inherit stale state from prior error events.
- Add an early test_bit(RECOVERY_IN_PROGRESS) gate at the top of
hw_error() so dump_debug_registers() and the recovery-counter
bookkeeping are skipped when a reset is already in flight; the
authoritative test_and_set lives in request_reset() and races
cleanly against any caller that passes the optimistic check.
- Convert the two resume() reset sites (FREEZE/HIBERNATE and the
D0-error path) to request_reset(data, FLR), removing the
redundant manual reset_type writes.
Assisted-by: GitHub-Copilot:claude-4.7-opus
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Do not export both functions since they are only used internally
within the bluetooth module.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Wiko Hi MateBook 14 Ryzen 200 laptops (DMI system-product-name
"MNCA-XX", board "M1060") are equipped with an RTL8852BE Wi-Fi/BT
combo chip (rtw89_8852be), whose Bluetooth radio enumerates as
1357:c123 instead of one of the already-supported 1358:c123 / 0bda:c123
identifiers, presumably due to OEM rebranding. Without a matching
entry it only matches the generic USB Bluetooth class fallback, so the
Realtek firmware/config (rtl8852btu_fw.bin / rtl8852btu_config.bin) is
never loaded and the adapter cannot discover or connect to any device,
even though hciconfig reports it as powered and scanning.
Device descriptor:
idVendor 0x1357
idProduct 0xc123
bcdDevice 0.00
iManufacturer 1 Realtek
iProduct 2 Bluetooth Radio
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
Adding the same BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH quirk already
used for 1358:c123 and 0bda:c123 fixes firmware loading and normal
operation.
Signed-off-by: Pavel Zverev <playximik29@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
btintel_pcie_coredump_worker() handled three unrelated jobs in one
work item: collect a DRAM trace coredump, read the hardware exception
event, and read the firmware-trigger event. The worker walked three
flag bits at runtime and each interrupt path mutated multiple bits
to communicate which sub-jobs the worker should run, which made the
ownership rules for those bits hard to reason about and entangled
the trigger reason with the in-progress accounting.
Replace the single combined worker with three single-purpose ones,
each owning exactly one flag:
coredump_work -> btintel_pcie_dump_traces()
guarded by COREDUMP_INPROGRESS
hwexp_work -> btintel_pcie_read_hwexp()
guarded by CORE_HALTED (already permanent until
re-probe; HWEXP_INPROGRESS is now redundant
and removed)
fwtrigger_work -> btintel_pcie_dump_fwtrigger_event()
guarded by FWTRIGGER_DUMP_INPROGRESS
All three workers are queued on a shared ordered workqueue (renamed
coredump_workqueue -> dump_workqueue) so a companion event reader
(hwexp/fwtrigger) and the coredump always run FIFO. Companion work
is queued before coredump_work so dmp_hdr.event_type/event_id are
populated by the time dump_traces() consumes them, preserving the
original ordering.
Introduce btintel_pcie_queue_coredump() to centralize the coredump
trigger contract: it is the single writer of COREDUMP_INPROGRESS and
of dmp_hdr.trigger_reason, sets both atomically against concurrent
triggers, and rolls back the bit if the workqueue is disabled
(reset/remove in progress) so a later trigger after re-probe can
succeed. All four trigger sites (HWEXP IRQ, FW-trigger IRQ,
devcoredump user trigger, resume() D0 error path) go through the
helper.
Per-work guard bits are now cleared at the tail of each worker
rather than in the middle of the combined worker, which closes a
subtle race where a duplicate IRQ could observe a cleared bit and
requeue while the previous pass was still finalizing
dev_coredumpv().
reset_work() and remove() now disable_work_sync() all three workers
and, on the FLR-failure path, enable_work() all three to keep their
disable counters balanced. The PLDR/FLR-success contract (re-probe
re-INIT_WORKs everything with counter 0) is preserved.
No functional change to the dump payloads; this is a pure
restructuring of the worker dispatch and its synchronization.
Signed-off-by: Kiran K <kiran.k@intel.com>
Assisted-by: GitHub-Copilot:claude-4.7-opus
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In nxp_serdev_probe(), if hci_register_dev() succeeds but ps_setup()
fails, the error path jumps to 'probe_fail' which only calls
hci_free_dev() and asserts the reset GPIO, but does NOT call
hci_unregister_dev() first.
This leaves the HCI device registered in the system with its backing
memory freed, leading to a use-after-free when userspace subsequently
accesses the device (e.g. via hciconfig or bluetoothd).
Fix by adding a 'probe_fail_unregister' label that calls
hci_unregister_dev() before falling through to the existing
'probe_fail' label. The original 'probe_fail' label is preserved
for the case where hci_register_dev() itself fails (device was
never registered, so no unregister is needed).
Signed-off-by: Zhao Dongdong <zhaodongdong@kylinos.cn>
Reviewed-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
nokia_setup_fw() walks a length-prefixed firmware stream and
decodes HCI command packets from each record.
Check that each record fits in the remaining firmware image, that command
records contain the HCI command header, and that the payload length is
covered before submitting the command.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Initialize @priv_size at declaration rather than separately:
- Simpler: one statement completes both declaration and assignment.
- More flexible: the variable is immediately usable from that point,
so any new priv_size += can be freely inserted without caring about
where the separate priv_size = 0 sits.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
HCI_Reset is a critical command, but hci_cc_reset() uses bt_dev_dbg()
to log it, so a non-zero error status response may not be noticed.
Fix by using bt_dev_err() when a status error occurs.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
btusb_shutdown_qca() open-codes a synchronous raw HCI reset that is
functionally equivalent to the newly added __hci_reset_sync().
Replace it with __hci_reset_sync() and return its result directly.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
qca_send_reset() is functionally equivalent to the newly added
__hci_reset_sync().
Drop qca_send_reset() and call __hci_reset_sync() directly.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Several vendor drivers have a requirement to send a synchronous raw HCI
reset with HCI_INIT_TIMEOUT.
Add a dedicated __hci_reset_sync() for them to use.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
'struct btusb_data' ideally should not include vendor specific
fields, but it currently includes the QCA devcoredump member
'struct qca_dump_info qca_dump'.
Fix by moving it into hci_dev private area accessed by hci_get_priv().
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Devcoredump is not enabled for ATH3012 or QCA_ROME, but they
unconditionally populate devcoredump fields in btusb_setup_qca().
Fix by populating devcoredump fields only when BTUSB_QCA_WCN6855 is
set, which marks the first generation of QCA BT SoCs for which
devcoredump is enabled.
Fixes: 20981ce2d5 ("Bluetooth: btusb: Add WCN6855 devcoredump support")
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add @match_id to btusb_data to record the matched usb_device_id
which will be used later.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
qca_set_bdaddr() waits for HCI_EV_VENDOR when sending
EDL_WRITE_BD_ADDR_OPCODE (0xFC14), but the controller responds with
Command Complete event as confirmed by btmon on WCN7850:
< HCI Command: Vendor (0x3f|0x0014) plen 6 #3 [hci0]
11 22 33 44 55 66
> HCI Event: Command Complete (0x0e) plen 4 #4 [hci0]
Vendor (0x3f|0x0014) ncmd 1
Status: Success (0x00)
Fix by passing 0 as the event parameter to __hci_cmd_sync_ev() to
wait for the command complete event instead.
Fixes: 5c0a1001c8 ("Bluetooth: hci_qca: Add helper to set device address")
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_cmd_sync_dequeue_once() had a single in-tree caller,
hci_cancel_connect_sync(), which now holds cmd_sync_work_lock across the
in-flight create flag test and the dequeue and so open-codes the lookup
and cancel under that lock. That leaves the exported
hci_cmd_sync_dequeue_once() with no in-tree user, so remove it along with
its declaration.
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Simplify 'force_no_mitm_write()' by using the convenient
'kstrtobool_from_user()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Enable compiler context analysis for Bluetooth subsystem and drivers.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add minimal compiler context analysis annotations, required for
compilation to pass.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add minimal compiler context analysis annotations, required for
compilation to pass.
Don't check complex conn->lock usage in l2cap_sock_shutdown(). The
analysis cannot know that chan->conn pointer is never replaced by a
different l2cap_conn.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add minimal compiler context analysis annotations, required for
compilation to pass.
compiler-context-analysis.h doesn't have tools to deal with the
conditional SRCU locking on return value used here, so just disable the
analysis in places instead of refactoring, in order to not make code
changes here.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add minimal compiler context analysis annotations, required for
compilation to pass.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Johannes Berg says:
====================
Quite a bunch more work, of note:
- iwlwifi: new FW version support
- mt76:
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- rtw89:
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- ath12k: AHB platform MultiPD support
- cfg80211: pre-assign cookies for operations
- mac80211: AQL support for multicast
* tag 'wireless-next-2026-08-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (403 commits)
wifi: nxpwifi: bound uAP association event IEs to the event buffer
wifi: nxpwifi: detach sync command buffer on interrupted wait
wifi: brcmfmac: Fix memory leak in brcmf_sdio_read_control()
wifi: rsi: Fix types to appease CFI
wifi: mac80211: skip default WMM setup for AP_VLAN links
wifi: nxpwifi: fix multiple static analysis errors and warnings
wifi: morsemicro: MM81X should be invisible and selected by its users
wifi: nxp: NXPWIFI should be invisible and selected by its users
wifi: cfg80211: stop PMSR before P2P and NAN teardown
wifi: mac80211: disconnect on CSA to channel 0
wifi: brcmfmac: fix P2P action frame handling without device vif
wifi: brcmfmac: Set DMA direction for msgbuf packet IDs
wifi: brcmfmac: validate msgbuf flowring IDs before use
wifi: mac80211: fix RCU usage in peer probing
wifi: mac80211: fix RCU dereference in throughput estimate
wifi: wilc1000: validate monitor transmit frame headers
wifi: mac80211: skip unused probe response countdown offsets
wifi: zd1211rw: reject secondary interfaces to prevent conflicts
wifi: nl80211: clean up color-change beacon data on errors
wifi: mac80211: send TWT teardown to peer after setup TX failure
...
====================
Link: https://patch.msgid.link/20260806121304.190084-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Looks like our attempt to keep the PRs smaller have only prevented
this one from getting even bigger. In the last 9 days there were
405 postings explicitly tagged with [PATCH net], vs 687 with [PATCH
net-next]. 37% of posted patches being fixes is pretty crazy, and
that's likely undercounting because LLM "researchers" more often post
fixes without knowing to tag the patches for specific trees. I don't
have historic data.
In any case, we keep adjusting the criteria. The next PR will be
smaller.
Current release - regressions:
- net: defer netdev KOBJ_ADD uevent until the device is published,
previously rtnl_lock would serialize the accesses vs publishing
- net: explicitly cancel work to avoid races with ref tracker exit
- qrtr: ns: raise lookup limit to 128
- eth: hns3: fix speed configuration residue after driver reload
Previous releases - regressions:
- tcp: do not change rcv_ssthresh in tcp_measure_rcv_mss(), regressed
flows with MSS and scaling_ratio variability
- Revert "net: thunderbolt: Enable end-to-end flow control also in
transmit", broke some platforms (no packets coming thru)
- eth: stmmac: resume PHY before hardware setup when opening the
interface
Previous releases - always broken:
- another pile of fixes for less common protocols (SCTP, TLS, SMC
etc.)
- close a couple of AF_PACKET bugs and ways it can build skbs
problematic for the rest of the stack
- bridge: mrp: fix uninitialised bytes on the wire
- net: devmem: prevent net-iov / page mixing, avoid crashes
- eth: atlantic: free RX pages of consumed but not refilled buffers"
* tag 'net-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (116 commits)
igc: fix netdev not re-attached after resume if interface is down
tls: don't abort the connection on signal-interrupted sends
net: avoid theoretical races with ref drain
net: Defer netdev KOBJ_ADD uevent until the device is published
MAINTAINERS: dpll: zl3073x: replace Prathosh Satish with Min Li
sctp: clear control chunk transport if it is being removed
net/atm: fix slab-out-of-bounds read in vcc_setsockopt()
s390/ism: Fix UAF of sba and ieq during ism_dev_exit()
packet: use consistent hard_header_len in TX_RING send path
packet: use consistent hard_header_len in non-ring send paths
net: remove CAP_SYS_RAWIO zero-padding in dev_validate_header
bnge: Fix resource leak in bnge_init_nic() error path
ptp: ocp: Fix board ID over-read
tls: rx: restore msg_iter before TLS 1.3 optimistic retry
selftests: tls: add a test for splicing onto a full plaintext record
tls: don't leave a full plaintext sk_msg ring unpushed
xdp: reject clones that overrun skb_shared_info tailroom
mptcp: reclaim forward-allocated memory on RX path errors
mptcp: fastopen: only mark MPTFO subflows with SYN data
mptcp: pm: fix memory leak from alloc-during-teardown race
...
BPF_SOCK_OPS_RWND_INIT lets a sockops BPF program pick the initial TCP
receive window, e.g. to advertise a larger window up front in environments
where that is known to be safe. Today it is only effective for the passive
(listener) side; on the active (connect) side the value is computed and
then silently discarded.
On the passive path tcp_openreq_init_rwin() inflates full_space when the
program returns a non-zero window, so tcp_select_initial_window() can offer
it:
else if (full_space < (u64)rcv_wnd * mss)
full_space = min_t(u64, (u64)rcv_wnd * mss, INT_MAX);
tcp_select_initial_window() only clamps the requested window *down* to the
available space, so without inflating the space first the BPF reply can
never raise the offered window above tcp_full_space(sk).
tcp_connect_init() calls tcp_rwnd_init_bpf() but never inflates full_space,
so on connect() the requested window is clamped back to tcp_full_space(sk)
(~64KB at the default rcvbuf) and the program's value is ignored.
Inflate full_space in tcp_connect_init() as well; tp->advmss is the mss the
listener path uses (both are tcp_mss_clamp(tp, dst_metric_advmss(dst))).
Read full_space after tcp_rwnd_init_bpf() so a program that also adjusts
SO_RCVBUF is still reflected. Compute the inflated value in u64 and clamp
to INT_MAX to avoid overflow (full_space is int, rcv_wnd is u32), and
apply the same overflow fix to the existing listener-side computation.
tcp_select_initial_window() itself also computes init_rcv_wnd * mss in
32-bit when clamping the offered window down to the requested value. A
large requested window (init_rcv_wnd greater than ~2.9M segments at
1460 mss) wraps this multiply and collapses the offered window to a tiny
value, so compute it in u64 as well.
Signed-off-by: Tejas Birajdar <tejasbirajdar@meta.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260730220055.2946171-1-tejasbirajdar@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__igc_resume() calls netif_device_attach() only inside the
netif_running() branch, so an interface that was down during suspend
is never re-attached on resume. It then stays in the not-present state
that __igc_shutdown() set via netif_device_detach(): ethtool reports
ENODEV and every attempt to bring the interface up fails the
netif_device_present() check in __dev_open() with -ENODEV, silently,
since __igc_resume() returns 0. Only reloading the driver recovers the
device.
This is easy to hit in practice because NetworkManager brings managed
interfaces down before sleep unless Wake-on-LAN is configured, making
the adapter unusable after every suspend/resume cycle with WoL
disabled.
Re-attach the netdev on every successful resume, as igb and e1000e do.
Fixes: 6f31d6b643 ("igc: Refactor runtime power management flow")
Cc: stable@vger.kernel.org
Signed-off-by: Philipp David <pd-lkml@3b.pm>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260804222205.1580328-11-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a signal interrupts a blocking send, tls_tx_records() treats the
resulting -ERESTARTSYS as a transmission failure and marks the socket
errored via tls_err_abort() with the raw error code. Later syscalls
return the kernel-internal errno 512 (ERESTARTSYS) to userspace, as the
signal it stems from is no longer pending during syscall exit and thus
never translated.
An interrupted send is not a connection error: the partially sent record
stays queued and is resent later. Interrupt error codes are therefore
excluded from the abort in the same way as -EAGAIN.
Fixes: b341ca51d2 ("tls: Fix tls_sw_sendmsg error handling")
Signed-off-by: Maximilian Immanuel Brandtner <maxbr@linux.ibm.com>
Link: https://patch.msgid.link/20260805063109.1772314-1-maxbr@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
