The LVDS init code looks up an I2C adapter using i2c_get_adapter() and
tries to read the EDID before falling back to allocating and registering
its own adapter.
Make sure to drop the references taken by i2c_get_adapter() when falling
back to allocating an adapter as well as on late errors to allow the
looked up adapter to be deregistered.
Fixes: 1b082ccf59 ("gma500: Add Oaktrail support")
Cc: stable@vger.kernel.org # 3.3
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260508144446.59722-4-johan@kernel.org
The LVDS init code looks up an I2C adapter using i2c_get_adapter() and
tries to read the EDID before falling back to allocating and registering
its own adapter.
The error handling does not separate these cases so on a late init
failure it will try to deregister and free also an adapter that had
previously been registered. Since i2c_get_adapter() takes another
reference to the adapter, deregistration hangs indefinitely while
waiting for the reference to be released.
Fix this by only destroying adapters allocated during LVDS init on
errors.
Fixes: a57ebfc0b4 ("drm/gma500: Make oaktrail lvds use ddc adapter from drm_connector")
Cc: stable@vger.kernel.org # 6.0
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260508144446.59722-3-johan@kernel.org
imx8qxp_pxl2dpi_get_available_ep_from_port() returns ERR_PTR()
on errors. imx8qxp_pxl2dpi_find_next_bridge() stores its return
value in a __free(device_node) variable before checking IS_ERR().
When the function returns on the error path, the cleanup action calls
of_node_put() on the ERR_PTR() value.
Do not let a device_node cleanup variable hold error pointers. Change
imx8qxp_pxl2dpi_get_available_ep_from_port() to return an int and pass
the endpoint node through an output argument. Initialize the output
argument to NULL so callers hold either NULL on error paths or a valid
device_node pointer on successful path.
Fixes: ceea3f7806 ("drm/bridge: imx8qxp-pxl2dpi: simplify put of device_node pointers")
Cc: stable@vger.kernel.org
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260507100604.667731-1-lgs201920130244@gmail.com
Signed-off-by: Liu Ying <victor.liu@nxp.com>
When ttm_tt_swapout() fails, the current code calls
ttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail()
to restore the resource's bulk_move membership.
However, ttm_resource_move_to_lru_tail() places the resource at the tail
of the LRU list which, relative to the walk cursor's hitch node (placed
immediately after the resource when it was yielded), puts the resource
*in front of the* the hitch. The next list_for_each_entry_continue() from
the hitch finds the same resource again, causing an infinite loop.
Fix by deferring del_bulk_move to the success path only.
On the success path, TTM_TT_FLAG_SWAPPED has just been set by
ttm_tt_swapout() but the resource is still tracked in the bulk_move range,
so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard would
incorrectly skip the removal. Introduce
ttm_resource_del_bulk_move_unevictable() which bypasses that guard.
Reported-by: Jatin Kataria <jkataria@netflix.com>
Fixes: fc5d96670e ("drm/ttm: Move swapped objects off the manager's LRU list")
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Cc: <stable@vger.kernel.org> # v6.13+
Assisted-by: GitHub_Copilot:claude-sonnet-4.6
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/20260428094442.16985-1-thomas.hellstrom@linux.intel.com
bochs_pci_probe() allocates the DRM device with devm_drm_dev_alloc(),
which registers a devres action to drop the initial DRM device reference
on driver detach or probe failure.
The error path currently calls drm_dev_put() manually. If probe then
returns an error, devres will run the registered release action and put
the same device again, after the first put may already have released it.
Return the probe error directly and let devres own the final put.
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Fixes: 04826f5886 ("drm/bochs: Allocate DRM device in struct bochs_device")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260424123506.32275-1-mhun512@gmail.com
When preparing the panel, it seems that it always expects commands to be
transferred in LP mode. However, the disable function removes the
MIPI_DSI_MODE_LPM flag, and no other function re-adds it.
As the unprepare function contains no DSI commands, re-adding the flag
just after disabling the panel should be safe. Add the code re-adding
the flag after the two commands for disabling the panel are sent.
This fixes screen unblanking (after blanking once) on
mt8188-geralt-ciri-sku1 device.
Cc: stable@vger.kernel.org # 6.11+
Fixes: 0ef94554dc ("drm/panel: himax-hx83102: Break out as separate driver")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260425165751.1716569-1-zhengxingda@iscas.ac.cn
When preparing the panel, it seems that it always expects commands to be
transferred in LP mode. However, the disable function removes the
MIPI_DSI_MODE_LPM flag, and no other function re-adds it.
As the unprepare function contains no DSI commands, re-adding the flag
just after disabling the panel should be safe. Add the code re-adding
the flag after the two commands for disabling the panel are sent.
This fixes error messages shown in kernel log when unblanking on
mt8183-kukui-kodama-sku32 device.
Cc: stable@vger.kernel.org
Fixes: a869b9db7a ("drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260503091708.1079962-1-zhengxingda@iscas.ac.cn
Like a number of other panel drivers, this newly merged driver
needs DRM_DISPLAY_DSC_HELPER to be enabled:
arm-linux-gnueabi-ld: drivers/gpu/drm/panel/panel-himax-hx83121a.o: in function `himax_prepare':
panel-himax-hx83121a.c:(.text+0x1024): undefined reference to `drm_dsc_pps_payload_pack'
Fixes: a7c61963b7 ("drm/panel: Add Himax HX83121A panel driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260413071043.3829868-1-arnd@kernel.org
When xa_alloc_cyclic() failed in etnaviv_sched_push_job(), the error
path skipped drm_sched_entity_push_job(). This is a violation of the DRM
scheduler contract, as once a job has been armed with drm_sched_job_arm(),
it must be pushed with drm_sched_entity_push_job(). From the DRM
scheduler documentation,
"""
drm_sched_job_arm() is a point of no return since it initializes the
fences and their sequence number etc. Once that function has been called,
you *must* submit it with drm_sched_entity_push_job() and cannot simply
abort it by calling drm_sched_job_cleanup().
"""
Fix this by splitting the fence ID allocation into two phases: first,
alloc an xarray slot before arming the job (which can fail), then fill in
the actual fence with xa_store() after arming. This way, allocation
failures are handled before the job is armed, and once armed, the job is
always pushed to the scheduler.
This also fixes a double call to drm_sched_job_cleanup(), as both
etnaviv_sched_push_job() and its caller would call it on failure.
Fixes: 764be12345 ("drm/etnaviv: convert user fence tracking to XArray")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260402193424.2023318-1-mcanal@igalia.com
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
When the damage area resulting from a dirty memory range spans a single
scanline, the width of the rectangle is calculated dynamically because it
may not coincide with the framebuffer width.
If the dirty range ends exactly at the end of the scanline, the `bit_end`
variable is incorrectly assigned a 0 value, which results in a bogus clip
rectangle where the x2 coordinate is 0. This prevents the dirty scanline
from being flushed to the hardware.
Change the calculation of the `bit_end` value to fix the x2 coordinate
value in the above edge case.
Fixes: ded74cafee ("drm/fb-helper: Clip damage area horizontally")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260210173545.733937-1-flavra@baylibre.com
drm_kms_helper_poll_init() initializes the output polling work and
enables polling for the DRM device. qxl enables polling before calling
drm_dev_register(), but the drm_dev_register() failure path tears down
the modeset and device state without disabling the polling helper.
The remove path also unregisters and shuts down the DRM device without
first disabling the polling helper. Add matching drm_kms_helper_poll_fini()
calls in both paths so the delayed polling work is cancelled before qxl
tears down the associated modeset/device state.
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 5ff91e4426 ("qxl: use drm helper hotplug support")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260424112543.57819-1-mhun512@gmail.com
This reverts commit 20e0c19780.
Despite claiming to add GA100 support, that commit actually has quite
a few problems. It falsely claims that there is no VBIOS. GA100 does
have a VBIOS, but it has no display engine, so it cannot use the
PRAMIN method the read VBIOS and must fall back to using PROM.
For whatever reason, the VBIOS on GA100 has an "Init-from-ROM"
(IFR) header where the PCI Expansion ROM would normally be found.
So to find that ROM, Nouveau needs to parse the IFR header.
The commit also falsely claimed that there is no graphics (GR) engine.
So rather than try to fix that commit, just revert it and start over
from scratch.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-2-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Prevent re-exporting of imported GEM buffers by adding a custom
prime_handle_to_fd callback that checks if the object is imported
and returns -EOPNOTSUPP if so.
Re-exporting imported GEM buffers causes loss of buffer flags settings,
leading to incorrect device access and data corruption.
Reported-by: Yametsu <yam3tsu@gmail.com>
Fixes: 57557964b5 ("accel/ivpu: Add support for userptr buffer objects")
Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.19+
[WHY]
A situation has occurred where udl_handle_damage() executed successfully
and the kernel log appears normal, but the display fails to show any output.
This is because the call to udl_get_urb() in udl_crtc_helper_atomic_enable()
failed without generating any error message.
[HOW]
1. Increase timeout of getting urb.
2. Add error messages when calling udl_get_urb() failed in
udl_crtc_helper_atomic_enable().
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 5320918b9a ("drm/udl: initial UDL driver (v4)")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v3.4+
Link: https://patch.msgid.link/20260424124427.657-1-oushixiong1025@163.com
drm_gem_fb_init_with_funcs() computes sub-sampled plane dimensions
using plain integer division:
unsigned int width = mode_cmd->width / (i ? info->hsub : 1);
unsigned int height = mode_cmd->height / (i ? info->vsub : 1);
However, the ioctl-level framebuffer_check() in drm_framebuffer.c uses
drm_format_info_plane_width/height() which round up dimensions via
DIV_ROUND_UP(). This inconsistency corrupts the subsequent GEM object
size check for certain pixel format and dimension combinations.
For example, with NV12 (vsub=2) and a 1-pixel-tall framebuffer the
GEM size validation path sees height=0 instead of height=1. The
expression (height - 1) then wraps to UINT_MAX as an unsigned int,
causing min_size to overflow and wrap back to a small value. A tiny
GEM object therefore passes the size guard, yet when the GPU accesses
the chroma plane it will read or write memory beyond the object's
bounds.
Fix by replacing the open-coded divisions with drm_format_info_plane_width()
and drm_format_info_plane_height(), which use DIV_ROUND_UP() and match
the calculation already used in framebuffer_check().
Fixes: 4c3dbb2c31 ("drm: Add GEM backed framebuffer library")
Cc: stable@vger.kernel.org # v4.14+
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260420013637.457751-1-ashutoshdesai993@gmail.com
Pull clk fix from Stephen Boyd:
"One more fix for the merge window to avoid a boot hang on
Raspberry Pi 3B by marking the VEC clk critical so that it
doesn't get turned off and hang the bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm: rpi: Mark VEC clock as CLK_IGNORE_UNUSED
Pull PCIe TSP update from Dan Williams:
"A small update for the TSM core. It is arguably a fix and coming in
late as I have been offline the past few weeks:
- Drop class_create() for the 'tsm' class"
* tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: coco: change tsm_class to a const struct
Pull Kbuild fixes from Nicolas Schier:
- builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds
- Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep
* tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Never respect CONFIG_WERROR / W=e to fixdep
kbuild: builddeb - avoid recompiles for non-cross-compiles
Pull power utility updates from Len Brown:
"x86_energy_perf_policy:
- Initial SoC Slider support
turbostat:
- Display HT siblings in cpu# order
- Add Module-ID column
- Print Core-ID and APIC-ID in hex
- Fix misc bugs"
* tag 'power-utilities-2026.04.25' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power x86_energy_perf_policy: Version 2026.04.25
tools/power x86_energy_perf_policy.8: Document SoC Slider Options
tools/power x86_energy_perf_policy: Enhances SoC Slider related checks
tools/power turbostat: v2026.04.21
tools/power turbostat: Process HT siblings in CPU order
tools/power turbostat: Show module_id column
tools/power turbostat: Print core_id and apic_id in hex
tools/power turbostat: Cleanup print helper functions
tools/power turbostat: Fix --cpu-set 1 regression on HT systems
tools/power turbostat: Fix --cpu-set 0 regression on HT systems
tools/power turbostat: Fix unrecognized option '-P'
tools/power turbostat: Fix AMD RAPL regression on big systems
tools/power/x86: Add SOC slider and platform profile support
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode"
* tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: abx80x: Disable alarm feature if no interrupt attached
rtc: ntxec: fix OF node reference imbalance
rtc: pic32: allow driver to be compiled with COMPILE_TEST
rtc: ti-k3: Add support to resume from IO DDR low power mode
rtc: cmos: Use platform_get_irq_optional() in cmos_platform_probe()
dt-bindings: rtc: add olpc,xo1-rtc to trivial-rtc
dt-bindings: rtc: sc2731: Add compatible for SC2730
rtc: add data_race() in rtc_dev_poll()
rtc: armada38x: zalloc + calloc to single allocation
dt-bindings: rtc: isl12026: convert to YAML schema
dt-bindings: rtc: microcrystal,rv3028: Allow to specify vdd-supply
rtc: max77686: convert to i2c_new_ancillary_device
dt-bindings: rtc: mpfs-rtc: permit resets
rtc: rx8025: Remove use of i2c_match_id()
rtc: rv8803: Remove use of i2c_match_id()
rtc: rs5c372: Remove use of i2c_match_id()
rtc: pcf2127: Remove use of i2c_match_id()
rtc: m41t80: Remove use of i2c_match_id()
rtc: abx80x: Remove use of i2c_match_id()
Pull tpm updates from Jarkko Sakkinen:
"Here are the accumulated fixes for 7.1-rc1 and a single structural
change worth mentioning separately: Rafael's commit converting tpm_crb
from ACPI driver to a platform driver"
* tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tpm_tis: stop transmit if retries are exhausted
tpm: tpm_tis: add error logging for data transfer
tpm: avoid -Wunused-but-set-variable
tpm: Use kfree_sensitive() to free auth session in tpm_dev_release()
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm: Fix auth session leak in tpm2_get_random() error path
tpm: i2c: atmel: fix block comment formatting
tpm_crb: Convert ACPI driver to a platform one
tpm: Make tcpci_pm_ops variable static const
Since v2025.11.22:
Initial SoC Slider support
SoC Slider is an SoC-wide power/performance policy setting.
On SoC Slider systems, EPP plays a diminished role.
Whitespace cleanup via: indent -npro -kr -i8 -ts8 -sob -l160 -ss -ncs -cp1
No functional changes
Signed-off-by: Len Brown <len.brown@intel.com>
x86_energy_perf_policy accesses the SoC Slider via standard
user/kernel APIs to the processor_thermal_soc_slider driver.
Machines that support SoC Slider largely use it instead of EPP,
which may continue to exist in a diminished role, or vanish entirely.
Signed-off-by: Len Brown <len.brown@intel.com>
When processor_thermal_soc_slider is loaded, its slider
and offset modparams are visible. Check that the driver
actually registered the profile named "SoC Slider" before
reading or writing these modparams.
n.b. This utility allows writing the Slider and Offset modparams
even if the driver policy is not "balanced". Currently the
processor_thermal_soc_slider consults those modparams
only in "balanced" mode.
Signed-off-by: Len Brown <len.brown@intel.com>
Pull ARM updates from Russell King:
- fix a race condition handling PG_dcache_clean
- further cleanups for the fault handling, allowing RT to be enabled
- fixing nzones validation in adfs filesystem driver
- fix for module unwinding
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9463/1: Allow to enable RT
ARM: 9472/1: fix race condition on PG_dcache_clean in __sync_icache_dcache()
ARM: 9471/1: module: fix unwind section relocation out of range error
fs/adfs: validate nzones in adfs_validate_bblk()
ARM: provide individual is_translation_fault() and is_permission_fault()
ARM: move FSR fault status definitions before fsr_fs()
ARM: use BIT() and GENMASK() for fault status register fields
ARM: move is_permission_fault() and is_translation_fault() to fault.h
ARM: move vmalloc() lazy-page table population
ARM: ensure interrupts are enabled in __do_user_fault()
Pull ring-buffer fix from Steven Rostedt:
- Fix accounting of persistent ring buffer rewind
On boot up, the head page is moved back to the earliest point of the
saved ring buffer. This is because the ring buffer being read by user
space on a crash may not save the part it read. Rewinding the head
page back to the earliest saved position helps keep those events from
being lost.
The number of events is also read during boot up and displayed in the
stats file in the tracefs directory. It's also used for other
accounting as well. On boot up, the "reader page" is accounted for
but a rewind may put it back into the buffer and then the reader page
may be accounted for again.
Save off the original reader page and skip accounting it when
scanning the pages in the ring buffer.
* tag 'trace-ring-buffer-v7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Do not double count the reader_page
