[Why]
Dmub provides several Replay residency calculation methods,
but current interface only supports either ALPM or PHY mode
[How]
Modify the interface for supporting different types
of Replay residency calculation.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leon Huang <leon.huang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With root clock optimization now enabled for DCN35 there
are still RCO registers still not being toggled
[How]
Add in logic to toggle RCO registers for DPPCLK,
DPSTREAMCLK and DSCCLK
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There could be cases that we are transition from MPC to ODM combine.
In this case if we map pipes before unmapping MPC pipes, we might
temporarly run out of pipes. The change reorders pipe resource
allocation. So we unmapping pipes before mapping new pipes.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In two display configuration, switching between subvp and non-subvp
may cause underflow because it moves an existing pipe between
displays
[How]
Create helper function for applying pipe split flags
Apply pipe split flags prior to deciding on subvp
During subvp check, do not merge pipes, so it can retain previous
pipe configuration
Add check for prev odm pipe in subvp check
For single display subvp case, use same odm policy for phantom pipes
as main subvp pipe
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] Mode pbn is not calculated correctly because timing pixel encoding is
not checked within convert_dc_color_depth_into_bpc.
[How] Get mode kbps from dc_bandwidth_in_kbps_from_timing, then calculate
pbn by kbps_to_peak_pbn.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From MES version 0x54, the log entry increased and require the log buffer
size to be increased. The 16k is maximum size agreed
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Covers GPU page fault debugging and adds a reference
to umr.
v2: update client ids to include SQC/G
v3: Remove duplicate text
v4: add umr documentation link, fix typo
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MES log might slow down the performance for extra step of log the data,
disable it by default and introduce a parameter can enable it when necessary
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While doing multiple S4 stress tests, GC/RLC/PMFW get into
an invalid state resulting into hard hangs.
Adding a GFX reset as workaround just before sending the
MP1_UNLOAD message avoids this failure.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
add a new enumeration type to identify device attribute node,
this method is relatively more efficient compared with 'strcmp' in
update_attr() function.
v2:
rename device_attr_type to device_attr_id.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Ma Jun <majun@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are cases where soft reset seems to succeed, but
does not, so always use mode1/2 for now.
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, with F32 HWS GPU reset is only when unmap queue fails.
However, if compute queue doesn't repond to preemption request in time
unmap will return without any error. In this case, only preemption error
is logged and Reset is not triggered. Call GPU reset in this case also.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix some bound and NULL check
- Fix nonseamless transition from ODM + MPO to ODM + subvp
- Allow Z8 when stutter threshold is not met
- Remove plane and stream pointers from dc scratch
- Remove read/write to external register
- Increase number of hpo dp link encoders
- Increase clock table size
- Add new IPS config mode
- Build scaling params when a new plane is appended
- Refactor DML2 interfaces
- Allow idle opts for no flip case on PSR panel
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We don't have a way to specify IPS2 for display off but RCG only for
static screen and local video playback.
[How]
Add a new setting that allows RCG only when displays are active but
IPS2 when all displays are off.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
We are boundling changes in plane state and build scaling params
together. This is to simplify DML code so DML doesn't need to build
scaling params. We are also avoiding rebuilding scaling params for
planes without scaling changes.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
when ODM + MPO is used for all 4 available pipes. Pipe transition will
be nonseamless. Phantom OTG master pipe reuses the secondary OPP head
pipe. There is no possible seamless path to transit to the new
state. The correct logic would be to reuse a secondary DPP pipe as the
phantom OTG master pipe. This way we are able to first transit the
minimal transtion state of new and then transit to new state seamlessly.
current New (nonseamless)
________________________ ________________________
| plane0 slice0 stream0| | plane0 slice0 stream0|
|DPP0----OPP0----OTG0----| |DPP0----OPP0----OTG0----|
| plane1 | | | | plane0 slice1 | |
|DPP2----| | | |DPP2----OPP2----| |
| plane0 slice1 | | | plane0 slice0 stream1|
|DPP1----OPP1----| | |DPP1----OPP1----OTG1----|
| plane1 | | | plane0 slice1 | |
|DPP3----| | |DPP3----OPP3----| |
|________________________| |________________________|
New (seamless) New (minimal transition)
________________________ ________________________
| plane0 slice0 stream0| | plane0 slice0 stream0|
|DPP0----OPP0----OTG0----| |DPP0----OPP0----OTG0----|
| plane0 slice1 | | | plane0 slice1 | |
|DPP1----OPP1----| | |DPP1----OPP1----| |
| plane0 slice0 stream1| |________________________|
|DPP2----OPP2----OTG2----|
| plane0 slice1 | |
|DPP3----OPP3----| |
|________________________|
[how]
Try to acquire free pipes used as secondary DPP pipes from current state
before try to acquire any free pipes for new OTG master pipe.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous patch to allow DTBCLK disable didn't address boot case. Driver
thinks DTBCLK is disabled by default, so we don't send disable message to
PMFW. DTBCLK is then enabled at idle desktop on boot, burning power.
[How]
Set dtbclk_en to true on boot so that disable message is sent during first
commit.
Fixes: 27750e176a ("drm/amd/display: Allow DTBCLK disable for DCN35")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previously, we'd disabled HPO whenever an HPO display was disconnected. This
caused other HPO displays to blank whenever one was unplugged.
[HOW]
This change restricts HPO enable/disable to dce110_apply_ctx_to_hw and adds a
helper function (dce110_is_hpo_enabled) that returns true if any HPO displays
are present in a context. We compare the current and previous dc ctx to check
whether HPO is transitioning from on to off or vice versa, and adjust the HPO
state accordingly.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
There were some fixes in dcn35 that need
to be ported over to dcn351 to prevent any
regression.
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Reviewed-by: Liu, Xi (Alex) <xiliu102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to re-enable idle power optimizations after entering PSR. Since,
we get kicked out of idle power optimizations before entering PSR
(entering PSR requires us to write to DCN registers, which isn't allowed
while we are in IPS).
Fixes: a9b1a4f684 ("drm/amd/display: Add more checks for exiting idle in DC")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
There is a corner case where a single PSR panel
fails to enter idle optimizations if the panel
is not flipping (no planes or DPMS_OFF == true).
This is because the panel will not enter PSR if it's
not flipping, but this will prevent the FW idle opt
path from being executed. To handle this case we will
allow entry to idle opt from driver side even when a
PSR panel is connected under the following scenarios:
1. Only a single PSR panel is connected
2. PSR panel is not flipping
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
