soc/tegra: Fixes for v7.2
Fix a spurious WARN() that was checking for an outdated condition.
* tag 'tegra-for-7.2-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: fuse: Fix spurious straps warning on SMCCC platforms
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
My Grace host started to show this warning:
WARNING: drivers/soc/tegra/fuse/tegra-apbmisc.c:120 at tegra_read_straps
tegra30_fuse_add_randomness
tegra30_fuse_init
tegra_fuse_probe
tegra_read_straps() warns when the static "chipid" cache is still zero,
using it as a proxy for "APBMISC has been initialised". However chipid
is only ever populated lazily by tegra_read_chipid() when it reads the
APBMISC register.
Guard on apbmisc_base instead, which is set unconditionally in
tegra_init_apbmisc_resources() for all platforms and is already the
sentinel used by tegra_read_chipid().
Fixes: 8b8ee2e56f ("soc/tegra: Use ARM SMCCC to get chip ID, revision, and platform info")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
Pull driver core updates from Danilo Krummrich:
"Deferred probe:
- Fix race where deferred probe timeout work could be permanently
canceled by using mod_delayed_work()
- Fix missing jiffies conversion in deferred_probe_extend_timeout()
- Guard timeout extension with delayed_work_pending() to prevent
premature firing
- Use system_percpu_wq instead of the deprecated system_wq
- Update deferred_probe_timeout documentation
device:
- Replace direct struct device bitfield access (can_match, dma_iommu,
dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
of_node_reused, offline, offline_disabled) with flag-based
accessors using bit operations
- Reject devices with unregistered buses
- Delete unused DEVICE_ATTR_PREALLOC()
- Add low-level device attribute macros with const show/store
callbacks, allowing device attributes to reside in read-only memory
- Move core device attributes to read-only memory
- Constify group array pointers in driver_add_groups() /
driver_remove_groups(), struct bus_type, and struct device_driver
device property:
- Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
- Initialize all fields of fwnode_handle in fwnode_init()
- Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
- Allow passing struct software_node_ref_args pointers directly to
PROPERTY_ENTRY_REF()
driver_override:
- Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
infrastructure, fixing a UAF from unsynchronized access to
driver_override in bus match() callbacks
- Remove the now-unused driver_set_override()
firmware loader:
- Fix recursive lock deadlock in device_cache_fw_images() when async
work falls back to synchronous execution
- Fix device reference leak in firmware_upload_register()
platform:
- Pass KBUILD_MODNAME through the platform driver registration macro
to create module symlinks in sysfs for built-in drivers; move
module_kset initialization to a pure_initcall and tegra cbb
registration to core_initcall to ensure correct ordering
- Pass THIS_MODULE implicitly through a coresight_init_driver() macro
sysfs:
- Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
WARN
- Add return value clamping to sysfs_kf_read()
Rust:
- ACPI:
Fix missing match data for PRP0001 by exporting
acpi_of_match_device()
- Auxiliary:
Replace drvdata() with dedicated registration data on
auxiliary_device. drvdata() exposed the driver's bus device private
data beyond the driver's own scope, creating ordering constraints
and forcing the data to outlive all registrations that access it.
Registration data is instead scoped structurally to the
Registration object, making lifecycle ordering enforced by
construction rather than convention.
- Rust-native device driver lifetimes (HRT):
Allow Rust device drivers to carry a lifetime parameter on their
bus device private data, tied to the device binding scope -- the
interval during which a bus device is bound to a driver. Device
resources like pci::Bar<'a> and IoMem<'a> can be stored directly in
the driver's bus device private data with a lifetime bounded by the
binding scope, so the compiler enforces at build time that they do
not outlive the binding. This removes Devres indirection from every
access site and eliminates try_access() failure paths in
destructors.
Bus driver traits use a Generic Associated Type (GAT) Data<'bound>
to introduce the lifetime on the private data, rather than
parameterizing the Driver trait itself. Auxiliary registration
data, where the lifetime is not introduced by a trait callback but
must be threaded through Registration, uses the ForLt trait (a
type-level abstraction for types generic over a lifetime).
Misc:
- Fix DT overlayed devices not probing by reverting the broken
treewide overlay fix and re-running fw_devlink consumer pickup when
an overlay is applied to a bound device
- Use root_device_register() for faux bus root device; add sanity
check for failed bus init
- Fix dev_has_sync_state() data race with READ_ONCE() and move it to
base.h
- Avoid spurious device_links warning when removing a device while
its supplier is unbinding
- Switch ISA bus to dynamic root device
- Fix suspicious RCU usage in kernfs_put()
- Remove devcoredump exit callback
- Constify devfreq_event_class"
* tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core: (81 commits)
software node: allow passing reference args to PROPERTY_ENTRY_REF()
driver core: platform: set mod_name in driver registration
coresight: pass THIS_MODULE implicitly through a macro
kernel: param: initialize module_kset in a pure_initcall
soc/tegra: cbb: Move driver registration from pure_initcall to core_initcall
firmware_loader: Fix recursive lock in device_cache_fw_images()
driver core: Use system_percpu_wq instead of system_wq
driver core: remove driver_set_override()
rpmsg: use generic driver_override infrastructure
Drivers: hv: vmbus: use generic driver_override infrastructure
cdx: use generic driver_override infrastructure
amba: use generic driver_override infrastructure
rust: devres: add 'static bound to Devres<T>
samples: rust: rust_driver_auxiliary: showcase lifetime-bound registration data
rust: auxiliary: generalize Registration over ForLt
rust: types: add `ForLt` trait for higher-ranked lifetime support
gpu: nova-core: separate driver type from driver data
samples: rust: rust_driver_pci: use HRT lifetime for Bar
rust: io: make IoMem and ExclusiveIoMem lifetime-parameterized
rust: pci: make Bar lifetime-parameterized
...
Pull thermal control updates from Rafael Wysocki:
"These add new hardware support (i.MX93 TMU, Amlogic T7, Intel Arrow
Lake, QCom Nord, Shikra and Hawi), fix issues in a number of places in
the thermal control core and drivers, clean up code and refactor it in
preparation for future changes:
- Rework the initialization and cleanup of thermal class cooling
devices to separate DT-based cooling device registration and
cooling device registration without DT (Daniel Lezcano, Ovidiu
Panait)
- Update the cooling device DT bindings to support 3-cell cooling
device representation, where the additional cell holds an ID to
select a cooling mechanism for devices that offer multiple cooling
mechanisms, and adjust the cooling device registration code
accordingly (Gaurav Kohli, Daniel Lezcano)
- Remove dead code from two functions in the thermal core and
simplify the unregistration of thermal governors (Rafael Wysocki)
- Fix critical temperature attribute removal handling in the generic
thermal zone hwmon support code and rework that code to register a
separate hwmon class device for each thermal zone (instead of using
one hwmon class device for all thermal zones of the same type) to
address thermal zone removal deadlocks (Rafael Wysocki)
- Use attribute groups for adding temperature attributes to hwmon
class devices associated with thermal zones (Rafael Wysocki)
- Pass WQ_UNBOUND when allocating the thermal workqueue (Marco
Crivellari)
- Fix potential shift overflow in ptc_mmio_write() and improve error
handling in proc_thermal_ptc_add() in the int340x thermal control
driver (Aravind Anilraj)
- Use sysfs_emit() for cpumask printing in the Intel powerclamp
thermal driver (Yury Norov)
- Add Arrow Lake CPU models to the intel_tcc_cooling driver (Srinivas
Pandruvada)
- Add QCom Nord, Shikra and Hawi temperature sensor DT bindings
(Deepti Jaggi, Gaurav Kohli, Dipa Ramesh Mantre)
- Use devm_add_action_or_reset() for clock disable on the NVidia
soctherm and switch it to devm cooling device registration version
(Daniel Lezcano)
- Add the Amlogic T7 thermal sensor along with thermal calibration
data read from SMC calls (Ronald Claveau)
- Fix atomic temperature read in the QCom tsens driver to comply with
hardware documentation (Priyansh Jain)
- Add SpacemiT K1 thermal sensor support (Shuwei Wu)
- Add i.MX93 temperature sensor support and filter out the invalid
temperature (Jacky Bai)
- Enable by default the TMU (Thermal Monitoring Unit) on Exynos
platform (Krzysztof Kozlowski)
- Rework interrupt initialization in the Tsens driver and add the
optional wakeup source (Priyansh Jain)
- Fix typo in a comment in the TSens QCom driver (Jinseok Kim)
- Fix trailing whitespace and repeated word in the OF code, remove
quoted string splitting across lines from the iMX7 driver, and
remove a stray space from the thermal_trip_of_attr() macro
definition (Mayur Kumar)
- Update the thermal testing facility code to avoid NULL pointer
dereferences by rejecting missing command arguments and replace
sscanf() with kstrtoint() or kstrtoul() in that code (Ovidiu
Panait, Samuel Moelius)"
* tag 'thermal-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
thermal: sysfs: Replace sscanf() with kstrtoul()
thermal: testing: Replace sscanf() with kstrtoint()
thermal: testing: reject missing command arguments
thermal: intel: intel_tcc_cooling: Add Arrow Lake CPU models
thermal/drivers/qcom/tsens: Disable wakeup interrupt setup on automotive targets
thermal/drivers/qcom/tsens: Switch wake IRQ handling to PM callbacks
thermal/core: Fix missing stub for devm_thermal_cooling_device_register
dt-bindings: thermal: cooling-devices: Update support for 3 cells cooling device
thermal/of: Support cooling device ID in cooling-spec
thermal/of: Pass cdev_id and introduce devm registration helper
thermal/of: Add cooling device ID support
thermal/of: Rename the devm_thermal_of_cooling_device_register() function
thermal/core: Make cooling device OF node conditional on CONFIG_THERMAL_OF
thermal/of: Move cooling device OF helpers out of thermal core
hwmon: Use non-OF thermal cooling device registration API
thermal/core: Add devm_thermal_cooling_device_register()
thermal/core: Introduce non-OF thermal_cooling_device_register()
thermal/drivers/samsung: Enable TMU by default
thermal/driver/qoriq: Workaround unexpected temperature readings from tmu
thermal/drivers/qoriq: Add i.MX93 tmu support
...
Pull SoC fixes from Arnd Bergmann:
"Two more small fixes came in, both addressing corner cases in platform
specific code: the microchip mpfs system controller probe and the CPU
power management on 32-bit rockchips SoCs"
* tag 'soc-fixes-7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: rockchip: keep reset control around
soc: microchip: mpfs-sys-controller: fix resource leak on probe error
TI SoC driver updates for v7.2
TI K3 TISCI:
- ti_sci: Add BOARDCFG_MANAGED mode for support system suspend/resume cycles
- ti_sci: Add support for restoring IRQ and clock contexts during resume.
- clk: keystone: sci-clk: Add clock restoration support.
SoC Drivers:
- k3-socinfo: Add support for identifying AM62P silicon variants via NVMEM,
along with corresponding dt-bindings update for nvmem-cells support
- k3-ringacc: Fix incorrect access mode for ring pop tail IO/proxy operations
Keystone Navigator (knav) Cleanup and Fixes:
- knav_qmss: Multiple code quality improvements
- knav_qmss_queue: Implement proper resource cleanup in the remove() path
General Cleanups:
- k3-ringacc: Use str_enabled_disabled() helper for consistency
- knav_qmss: Use %pe format specifier for PTR_ERR() printing
* tag 'ti-driver-soc-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
firmware: ti_sci: Add support for restoring clock context during resume
clk: keystone: sci-clk: Add restore_context() operation
firmware: ti_sci: Add support for restoring IRQs during resume
firmware: ti_sci: Add BOARDCFG_MANAGED mode support
soc: ti: k3-ringacc: Use str_enabled_disabled() helper
soc: ti: knav_dma: Use IOMEM_ERR_PTR() in pktdma_get_regs()
soc: ti: knav_dma: Remove dead check on unsigned args.args[0]
soc: ti: knav_dma: Remove unused DMA_PRIO_MASK macro
soc: ti: knav_qmss_acc: Fix kernel-doc Return: tag
soc: ti: knav_qmss: Fix __iomem annotations and __be32 type
soc: ti: knav_qmss: Use %pe to print PTR_ERR()
soc: ti: knav_qmss: Fix kernel-doc Return: tags
soc: ti: knav_qmss: Inline lockdep condition in for_each_handle_rcu
soc: ti: knav_qmss: Rename global kdev to knav_qdev to fix -Wshadow
soc: ti: knav_qmss: Remove remaining redundant ENOMEM printks
soc: ti: knav_qmss_queue: Implement resource cleanup in remove()
soc: ti: k3-ringacc: Fix access mode for k3_ringacc_ring_pop_tail_io/proxy
soc: ti: knav_dma: fix all kernel-doc warnings in knav_dma.h
soc: ti: k3-socinfo: Add support for AM62P variants via NVMEM
dt-bindings: hwinfo: ti,k3-socinfo: Add nvmem-cells support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom SoC drivers changes for 7.2, please
pull the following:
- Justin changes the soc_device driver to be more modern and consolidate
the initialization
- Chen-Yu updates the BCM2835 firmware Kconfig dependency and adds
COMPILE_TEST
* tag 'arm-soc/for-7.2/drivers' of https://github.com/Broadcom/stblinux:
firmware: raspberrypi: Change dependency to ARCH_BCM2835 and COMPILE_TEST
soc: brcmstb: consolidate initcall functions
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
soc/tegra: pmc: Changes for v7.2-rc1
The bulk of these changes converts existing users to the modern variants
of the API that take a PMC instance as argument. This completes the
transition to multi-instance support, which then makes room for cleanups
and restricting the remaining legacy APIs to 32-bit platforms.
Some changes in this set also clean up powergate debugfs and restrict
the power-off handler to be installed only where appropriate. Lastly,
support for Tegra238 is added.
* tag 'tegra-for-7.2-pmc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
usb: xhci: tegra: Explicitly specify PMC instance to use
PCI: tegra: Explicitly specify PMC instance to use
media: vde: Explicitly specify PMC instance to use
drm/tegra: Explicitly specify PMC instance to use
drm/nouveau: tegra: Explicitly specify PMC instance to use
ata: ahci_tegra: Explicitly specify PMC instance to use
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
soc/tegra: Changes for v7.2-rc1
These changes update some maintainer contact information, add a modern
way of reading the chip information and cleanup/enhance some existing
code.
* tag 'tegra-for-7.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: Use ARM SMCCC to get chip ID, revision, and platform info
soc/tegra: fuse: Register nvmem lookups at probe
Documentation: ABI: Take over as contact for sysfs-driver-tegra-fuse
MAINTAINERS: Move Peter De Schrijver to CREDITS
bus: tegra-aconnect: Use dev_err_probe for probe error paths
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
aspeed: First batch of driver changes for v7.2
While bc13f14f5c ("soc: aspeed: cleanup dead default for
ASPEED_SOCINFO") was committed just now it has been in -next for a while as
b333a0f1c857411d83a02aa6f1d9ecc7666d6179. The commit is fresh as I moved it
between branches.
Other than that it's just the one other patch from Krzysztof tidying up the
location of MODULE_DEVICE_TABLE().
* tag 'aspeed-7.2-drivers-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
soc: aspeed: Move MODULE_DEVICE_TABLE next to the table itself
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Allwinner driver changes for 7.2
Mostly changes to the SRAM driver to allow for one SRAM region to be
"claimed" by multiple changes. When a region is "claimed" it is removed
or disconnected from the CPU's view. This is needed on the H6 and H616,
which have one alias region seemingly shared between the video codec
engine and the display engine.
One minor fix for the RSB driver is also included.
* tag 'sunxi-drivers-for-7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sunxi-rsb: Always check register address validity
soc: sunxi: sram: Add H616 SRAM regions
soc: sunxi: sram: Support claiming multiple regions per device
soc: sunxi: sram: Allow SRAM to be claimed multiple times
soc: sunxi: sram: Const-ify sunxi_sram_func data and references
dt-bindings: sram: sunxi-sram: Add H616 SRAM regions
dt-bindings: sram: Document Allwinner H616 VE SRAM
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
MediaTek SoC driver updates
This adds subsys ID compatibility in MediaTek CMDQ, paving
the way for adding support for the MT8196 SoC, and fixes
the Multimedia System (MMSYS) routing masks for the MT8167
SoC.
* tag 'mtk-soc-for-v7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-mmsys: Restore MT8167 routing masks lost during merge
soc: mediatek: mtk-cmdq: Add cmdq_pkt_jump_rel_temp() for removing shift_pa
soc: mediatek: Use pkt_write function pointer for subsys ID compatibility
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Commit "driver core: platform: set mod_name in driver registration" will
set struct device_driver's mod_name member for platform driver
registration. For a driver to be registered with its mod_name set,
module_kset needs to be initialized, which currently happens in a
subsys_initcall in param_sysfs_init(). The tegra cbb drivers register
themselves before module_kset init, in a pure_initcall. This works
currently because lookup_or_create_module_kobject(), which dereferences
module_kset via kset_find_obj(), is not called if mod_name is not set,
which is the case now.
So in preparation for the commit "driver core: platform: set mod_name in
driver registration", move tegra cbb driver registration to
core_initcall level, and commit "kernel: param: initialize module_kset
in a pure_initcall" will move module_kset init to pure_initcall level,
ensuring module_kset init happens before tegra cbb driver registration.
Suggested-by: Gary Guo <gary@garyguo.net>
Acked-by: Sumit Gupta <sumitg@nvidia.com>
Co-developed-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260518-acpi_mod_name-v5-1-705ccc430885@sony.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
To clarify that the function operates on child nodes, rename:
devm_thermal_of_cooling_device_register()
|
v
devm_thermal_of_child_cooling_device_register()
Used the command:
find . -type f -name '*.[ch]' -exec \
sed -i 's/devm_thermal_of_cooling_device_register/\
devm_thermal_of_child_cooling_device_register/g' {} \;
Did not used clang-format-diff because it does not indent correctly
and checkpatch complained. Manually reindented to make checkpatch
happy
This prepares for upcoming support of cooling devices identified by
an ID rather than device tree child nodes.
No functional change.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260526140802.1059293-18-daniel.lezcano@oss.qualcomm.com
The same kconfig 'default' statement appears twice for ASPEED_SOCINFO,
which is unnecessary.
This dead code was found by kconfirm, a static analysis tool for Kconfig.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
The Tegra238 PMC is largely similar to that found on earlier chips, but
not completely compatible. Add support for the PMC on Tegra238.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra PMC power-off handler exists solely to reboot the Nexus 7 into
a special bootloader mode when a USB cable is connected, so that the
bootloader can display battery status instead of powering off. There is
no reason to register it on any other Tegra board.
Guard the registration behind of_machine_is_compatible("asus,grouper")
and rename the handler to tegra_pmc_grouper_power_off_handler to make
its scope explicit. The of_machine_is_compatible() check inside the
handler itself is now redundant and is removed.
This also avoids occupying SYS_OFF_PRIO_FIRMWARE on boards that have
other handlers at that priority level.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The 'powergate' debugfs node is used to show the state of the powergates
but for some devices the 'num_powergates' is 0 and so it displays
nothing. Therefore, only populate this debugfs entry for devices where
num_powergates is greater than 0.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
None of this legacy code is needed on 64-bit ARM devices, so it can be
moved behind a corresponding preprocessor guard. This more cleanly
separates out the legacy code from code needed on current platforms.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All callers of these functions have been replaced by their variants
taking a PMC context as an input, so they are no longer used and can be
removed.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For legacy purposes, an early PMC context is needed to support certain
drivers and functionalities. However, when the PMC driver is probed in
the later boot stages, the early context is no longer needed. Allocate
the PMC context dynamically at probe time so that it can be used going
forward.
While at it, rename the early PMC context to more accurately reflect
what it is used for. It's technically not only for early boot stages,
but also to support some code that doesn't have a way of obtaining the
correct context otherwise (e.g. no access to device tree).
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Qualcomm driver updates for v7.2
Enable QSEECOM and with that access to UEFI variables on the Surface Pro
12in laptop.
Refactor the Geni Serial-Engine helper code to allow the serial engine
drivers (such as I2C) to operate on targets where power and performance
is controlled through an SCMI server instead of individual resources in
Linux.
Extend the LLCC driver to support reading its data from a System Cache
Table (SCT) in memory instead of being hard coded per platform in the
driver. Also add support for the Eliza platform.
Add support for the Hawi platform to pd-mapper.
Switch the SMEM driver to track partitions using xarray to handle the
ever growing number of hosts better.
Extend the socinfo driver with knowledge about the Nord, SM7750,
IPQ9650, and Shikra SoCs, as well as PMAU0102, PMC1020H, PMIV0102, and
PMIV0104 PMICs.
Define UBWC 3.1 and add a couple of convenient helpers in the UBWC
library for MDSS and Adreno.
Fix a memory leak in the WCNSS firmware download mechanism.
* tag 'qcom-drivers-for-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
soc: qcom: geni-se: Introduce helper APIs for performance control
soc: qcom: geni-se: Introduce helper API for attaching power domains
soc: qcom: geni-se: Add resources activation/deactivation helpers
soc: qcom: geni-se: Handle core clk in geni_se_clks_off() and geni_se_clks_on()
soc: qcom: geni-se: Introduce helper API for resource initialization
soc: qcom: geni-se: Add geni_icc_set_bw_ab() function
soc: qcom: geni-se: Refactor geni_icc_get() and make qup-memory ICC path optional
soc: qcom: llcc-qcom: Fix NULL vs IS_ERR() bug in qcom_llcc_get_fw_config()
soc: qcom: llcc-qcom: Add support for Eliza
dt-bindings: cache: qcom,llcc: Document Eliza LLCC block
soc: qcom: ubwc: add helper controlling AMSBC enablement
soc: qcom: ubwc: define helper for MDSS and Adreno drivers
soc: qcom: ubwc: define UBWC 3.1
soc: qcom: socinfo: Add SoC ID for Nord SA8797P
dt-bindings: arm: qcom,ids: Add SoC ID for Nord SA8797P
soc: qcom: socinfo: Add SoC ID for SM7750
dt-bindings: arm: qcom,ids: Add SoC ID for SM7750
soc: qcom: socinfo: Add PMIC PMAU0102
soc: qcom: socinfo: Add PMIV0102 & PMIV0104 PMICs
firmware: qcom: scm: Allow QSEECOM on Surface Pro 12in
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tegra410 and Tegra241 deprecate the HIDREV register. The recommended
method is to use ARM SMCCC to retrieve the chip ID, major and minor
revisions, and platform information.
Prefer ARM SMCCC when the platform supports it; fall back to HIDREV
otherwise. Behavior on older Tegra SoCs that do not support ARM SMCCC
remains unchanged.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
i.MX SoC fixes for v7.1
Fix CAAM driver probe failures caused by missing SoC information by
retrieving the match data directly through of_machine_get_match_data(),
which provides the correct SoC-specific data.
* tag 'imx-soc-fixes-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux:
soc: imx8m: Fix match data lookup for soc device
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Register nvmem lookups in tegra_fuse_probe(), after the nvmem device has
been registered, since they can only be used after the nvmem device is
registered.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Coccinelle (scripts/coccinelle/api/string_choices.cocci) flags an
opportunity to replace the open-coded ternary expression in the probe
dev_info() call:
k3-ringacc.c:1439:3-32: opportunity for
str_enabled_disabled(ringacc->dma_ring_reset_quirk)
Replace the ternary with str_enabled_disabled() and add the required
include for <linux/string_choices.h>.
Reviewed-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Reviewed-by: Hari Prasath Gujulan Elango <gehariprasath@ti.com>
Link: https://patch.msgid.link/20260512170623.3174416-12-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
pktdma_get_regs() returns a void __iomem * but uses ERR_PTR() on the
error path, causing sparse to warn about an address space mismatch.
Replace ERR_PTR() with IOMEM_ERR_PTR() to resolve the warning cleanly.
Reviewed-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Reviewed-by: Hari Prasath Gujulan Elango <gehariprasath@ti.com>
Link: https://patch.msgid.link/20260512170623.3174416-11-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
smatch warns:
knav_dma.c:390 of_channel_match_helper() warn: unsigned
'args.args[0]' is never less than zero.
of_phandle_args.args[] is uint32_t, so the 'args.args[0] < 0' check
is always false. of_parse_phandle_with_fixed_args() already handles
errors by returning a non-zero code, which is checked immediately
above. Remove the dead check.
Reviewed-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Reviewed-by: Hari Prasath Gujulan Elango <gehariprasath@ti.com>
Link: https://patch.msgid.link/20260512170623.3174416-10-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
DMA_PRIO_MASK (GENMASK(3, 0)) is defined alongside the other priority
macros but is never referenced in the code. tx_priority and rx_priority
are only ever assigned DMA_PRIO_DEFAULT (0) and are never sourced from
device tree or user-controlled input, so no out-of-range value is
possible. W=2 builds report:
knav_dma.c:32:9: warning: macro is not used [-Wunused-macros]
32 | #define DMA_PRIO_MASK GENMASK(3, 0)
Remove the dead macro.
Reviewed-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Reviewed-by: Hari Prasath Gujulan Elango <gehariprasath@ti.com>
Link: https://patch.msgid.link/20260512170623.3174416-9-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Fix several address-space and type annotation issues reported by sparse:
- Change pdsp->command from 'void __iomem *' to 'u32 __iomem *' to
match the other union members (acc_command, qos_command); adjust
the offset in knav_queue_load_pdsp() from +0x18 to +0x6 to
preserve the 24-byte offset.
- Fix knav_queue_pdsp_wait() declaration: correct the parameter
annotation from 'u32 * __iomem' (pointer-in-iomem-space) to
'u32 __iomem *' (pointer-to-iomem); use 'unsigned int' for the
timeout parameter instead of bare 'unsigned'; fix the continuation-
line alignment.
- Use IOMEM_ERR_PTR() in knav_queue_map_reg() instead of ERR_PTR()
when returning an error as void __iomem *.
- Annotate the firmware data array as 'const __be32 *' instead of
'u32 *', as be32_to_cpu() requires __be32 input.
Reviewed-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Reviewed-by: Hari Prasath Gujulan Elango <gehariprasath@ti.com>
Link: https://patch.msgid.link/20260512170623.3174416-7-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Coccinelle (scripts/coccinelle/misc/ptr_err_to_pe.cocci) flags the
dev_err() call in knav_pool_create():
knav_qmss_queue.c:789:9-16: WARNING: Consider using %pe to print
PTR_ERR()
Replace the %ld / PTR_ERR() pair with %pe and pass the error pointer
directly to also print the symbolic error name.
Reviewed-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Reviewed-by: Hari Prasath Gujulan Elango <gehariprasath@ti.com>
Link: https://patch.msgid.link/20260512170623.3174416-6-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
knav_dev_lock_held() is a single-use wrapper around
lockdep_is_held(&knav_dev_lock), used only as the lockdep condition
in for_each_handle_rcu. When CONFIG_PROVE_RCU_LIST is disabled,
list_for_each_entry_rcu() elides the condition argument entirely,
causing clang to report the macro as unused with W=2:
knav_qmss_queue.c:30:9: warning: macro is not used [-Wunused-macros]
30 | #define knav_dev_lock_held() \
Remove the intermediate macro and open-code lockdep_is_held() directly
in the for_each_handle_rcu definition.
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Reviewed-by: Hari Prasath Gujulan Elango <gehariprasath@ti.com>
Link: https://patch.msgid.link/20260512170623.3174416-4-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Building with W=2 (clang, LLVM=1) produces 22 -Wshadow warnings in
knav_qmss_queue.c because the file-scoped singleton 'kdev' is shadowed
by a parameter of the same name in 21 internal functions and one local
variable, e.g.:
knav_qmss_queue.c:194:49: warning: declaration shadows a variable
in the global scope [-Wshadow]
194 | knav_queue_match_id_to_inst(struct knav_device *kdev, unsigned id)
Rename the global singleton from kdev to knav_qdev rather than
renaming all ~21 function parameters, as this requires fewer changes
and leaves function signatures, struct field accesses, and header
macros in knav_qmss.h untouched.
Reviewed-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Reviewed-by: Hari Prasath Gujulan Elango <gehariprasath@ti.com>
Link: https://patch.msgid.link/20260512170623.3174416-3-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Commit 168d2fb780 ("soc: ti: knav_qmss: Remove ENOMEM printks")
removed redundant dev_err() calls after allocation failures in
knav_queue_setup_regions, knav_queue_init_qmgrs and
knav_queue_init_pdsps, but missed three further instances in
knav_pool_create, knav_queue_setup_region and knav_setup_queue_range.
Remove the missed instances.
Reviewed-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Reviewed-by: Hari Prasath Gujulan Elango <gehariprasath@ti.com>
Link: https://patch.msgid.link/20260512170623.3174416-2-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Merge the refactoring and helper functions in the Qualcomm GENI Serial
Engine driver through a topic branch.
These changes will provide the ability to add support managing power and
performance for the GENI instances in platforms where these are
controlled as SCMI resources.
The patches are merged through a topic branch to avoid conflicts with other
changes, while making them available to other subsystems.
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The GENI Serial Engine (SE) drivers (I2C, SPI, and SERIAL) currently
manage performance levels and operating points directly. This resulting
in code duplication across drivers. such as configuring a specific level
or find and apply an OPP based on a clock frequency.
Introduce two new helper APIs, geni_se_set_perf_level() and
geni_se_set_perf_opp(), addresses this issue by providing a streamlined
method for the GENI Serial Engine (SE) drivers to find and set the OPP
based on the desired performance level, thereby eliminating redundancy.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-8-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently, core clk is handled individually in protocol drivers like
the I2C driver. Move this clock management to the common clock APIs
(geni_se_clks_on/off) that are already present in the common GENI SE
driver to maintain consistency across all protocol drivers.
Core clk is now properly managed alongside the other clocks (se->clk
and wrapper clocks) in the fundamental clock control functions,
eliminating the need for individual protocol drivers to handle this
clock separately.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-5-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
