The LTC3676_IRQSTAT_* bit definitions do not match the IRQSTAT
(Interrupt Request Status) register layout documented in Table 15
of the LTC3676/LTC3676-1 datasheet:
bit 0 - Pushbutton Status Active
bit 1 - Hard Reset Occurred
bit 2 - PGOOD Timeout Occurred
bit 3 - Undervoltage Warning
bit 4 - Undervoltage Standby (Fault) Occurred
bit 5 - Overtemperature Warning
bit 6 - Overtemperature Standby (Fault) Occurred
bit 7 - Reserved
The driver instead defines these starting at bit 3, one bit higher
than the datasheet specifies, which causes ltc3676_regulator_isr()
to check the wrong status bits and misreport (or miss) PGOOD
timeout, undervoltage and thermal warning/fault conditions.
Fix the bit offsets to match the datasheet.
Fixes: 37b918a034 ("regulator: Add LTC3676 support")
Cc: stable@vger.kernel.org
Signed-off-by: Abhishek Ojha <Abhishek.ojha@savoirfairelinux.com>
Link: https://patch.msgid.link/20260715170408.295552-1-Abhishek.ojha@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Compare against -EDEADLK, which is what ww_mutex_lock() actually
returns and what every other deadlock check in this file already uses.
Function regulator_lock_two() acquires two regulators via
regulator_lock_nested() -> ww_mutex_lock(). On contention,
ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop
the lock it holds and retry the acquisition in the canonical order.
However, regulator_lock_two() tests the return value against -EDEADLOCK
rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are
the same value, so the comparison happens to be correct and the bug is
invisible. But on MIPS, SPARC, and PowerPC, those two errors have
different values. The test is wrong: a genuine -EDEADLK backoff no
longer matches -EDEADLOCK, so instead of unlocking and retrying, the
code falls into WARN_ON(ret) and returns with only one of the two
regulators locked.
In practice, this is a bug only on MIPS, because the regulator core is
not built or used on the other two platforms.
In general, EDEADLK is preferred over EDEADLOCK for new code.
Fixes: cba6cfdc7c ("regulator: core: Avoid lockdep reports when resolving supplies")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260708235722.2953579-1-ttabi@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704124352.7981-1-pengpeng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704122926.21586-1-pengpeng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull regulator fixes from Mark Brown:
"A couple of unremarkable driver specific fixes that came in during the
merge window"
* tag 'regulator-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: da9121: Use subvariant ids in the I2C table
regulator: pca9450: Correct default t_off_deb for PCA9451A/PCA9452
da9121_i2c_probe() stores i2c_get_match_data() in chip->subvariant_id
and da9121_assign_chip_model() switches on DA9121_SUBTYPE_* values. The
OF table provides those subvariant values, but the I2C id table
currently provides DA9121_TYPE_* values.
Make the I2C id table use the same subvariant namespace as the OF table
so non-DT I2C matches feed the expected data type into the model
assignment code.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260624060024.61300-1-pengpeng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull regulator updates from Mark Brown:
"The development of the regulator subsystem continues to be quite
quiet, we've got several new devices, removal of one old device and
some kernel wide cleanup of platform devices but nothing in the core.
- Cleanups of platform_device_id usage
- Filling out and fixing of the description of the MediaTek MT6359
- Removal of the PCAP regulator driver, the MFD has been removed
- New device support for Qualcomm Nord RPMH, PM8109, PM8150 and
PMAU0102, and SG Micro SGM3804"
* tag 'regulator-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (23 commits)
regulator: dt-bindings: mt6311: Convert to DT schema
regulator: qcom_smd-regulator: Add PM8019
regulator: dt-bindings: qcom,smd-rpm-regulator: Add PM8019
regulator: mt6359: Fix vbbck default internal supply name
regulator: bq257xx: drop confusing configuration of_node
regulator: Unify usage of space and comma in platform_device_id arrays
regulator: Use named initializers for platform_device_id arrays
regulator: Drop unused assignment of platform_device_id driver data
regulator: scmi: fix of_node refcount leak in scmi_regulator_probe()
regulator: remove used pcap regulator driver
regulator: add SGM3804 Dual Output driver
regulator: dt-bindings: document the SGM3804 Dual Output regulator
regulator: mt6359: Add proper ldo_vcn33_[12] regulators
regulator: mt6359: Add regulator supply names
regulator: mt6359: const-ify regulator descriptions
regulator: dt-bindings: mt6359: Deprecate bogus vcn33_[12]_* split regulators
regulator: dt-bindings: mt6359: Drop regulator-name pattern restrictions
regulator: palmas: Move MODULE_DEVICE_TABLE next to the table itself
regulator: qcom_smd: Add PM8150 regulators
regulator: dt-bindings: qcom,smd-rpm-regulator: Document PM8150 IC
...
This issue was pointed out by Sashiko.
vbbck is fed internally from vio18. For the MT6359, the default supply
name was incorrectly set as "VIO18", instead of the supply's default
"VIO18". In practice this still works, but it causes the regulator
description copy and replace to always happen. For the MT6359P the
name is correct.
Fix the supply name for MT6359 so that both instances are the same and
correct. Also copy the comment about the internal supply from the MT6359
list to the MT6359P list.
Fixes: 10be8fc1d5 ("regulator: mt6359: Add regulator supply names")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260609083630.1600070-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver reuses the OF node of the parent multi-function device but
still sets the of_node field of the regulator configuration to any prior
OF node.
Since the MFD child device does not have an OF node set until probe is
called, this field is set to NULL on first probe and to the reused OF
node if the driver is later rebound.
As the device_set_of_node_from_dev() helper drops a reference to any
prior OF node before taking a reference to the new one this can
apparently also confuse LLMs like Sashiko which flags it as a potential
use-after-free (which it is not).
Drop the confusing and redundant configuration of_node assignment.
Link: https://sashiko.dev/#/patchset/20260408073055.5183-1-johan%40kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260604115912.2734074-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
scmi_regulator_probe() calls of_find_node_by_name() which takes a
reference on the returned device node. On the error path where
process_scmi_regulator_of_node() fails, the function returns without
calling of_node_put() on the child node, leaking the reference.
Add of_node_put(np) on the error path to properly release the
reference.
Cc: stable@vger.kernel.org
Fixes: 0fbeae70ee ("regulator: add SCMI driver")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260527104850.872415-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
When build-testing this driver without CONFIG_IRQ_DOMAIN causes
a compile-time error:
drivers/regulator/mt6363-regulator.c: In function 'mt6363_regulator_probe':
drivers/regulator/mt6363-regulator.c:884:18: error: implicit declaration of function 'irq_find_host' [-Wimplicit-function-declaration]
884 | domain = irq_find_host(interrupt_parent);
| ^~~~~~~~~~~~~
drivers/regulator/mt6363-regulator.c:884:16: error: assignment to 'struct irq_domain *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
884 | domain = irq_find_host(interrupt_parent);
| ^
drivers/regulator/mt6363-regulator.c:896:30: error: implicit declaration of function 'irq_create_fwspec_mapping'; did you mean 'irq_create_of_mapping'? [-Wimplicit-function-declaration]
896 | info->virq = irq_create_fwspec_mapping(&fwspec);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
| irq_create_of_mapping
This is rather hard to trigger because so many other drivers
enable IRQ_DOMAIN already, but I ran into this on an s390
randconfig build.
Ensure this is always enabled using a Kconfig 'select IRQ_DOMAIN'
entry, as we do for all other users of this.
Fixes: 3c36965df8 ("regulator: Add support for MediaTek MT6363 SPMI PMIC Regulators")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260526102003.2527570-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Neil Armstrong <neil.armstrong@linaro.org> says:
Add support for the SG Micro SGM3804 Single Inductor Dual Output
Buck/Boost Converter used to power LCD panels a provide positive
and negative power rails with configurable voltage and active
discharge function for each output.
The SGM3804 is powered by the enable GPIO pins inputs and only
supports I2C write messages.
In order to add flexibility and simplify the driver, the
regmap cache is enabled and populated with default values
since we can't write registers when the 2 GPIOs are down.
This regulator is used to provide vsn and vsn power to the
Ayaneo Pocket S2 dual-DSI LCD panel.
Link: https://patch.msgid.link/20260522-topic-sm8650-ayaneo-pocket-s2-sgm3804-v5-0-bd6b1c300ecc@linaro.org
Add support for the SG Micro SGM3804 Single Inductor Dual Output
Buck/Boost Converter used to power LCD panels a provide positive
and negative power rails with configurable voltage and active
discharge function for each output.
The SGM3804 is powered by the enable GPIO pins inputs and only
supports I2C write messages.
In order to add flexibility and simplify the driver, the
regmap cache is enabled and populated with default values
since we can't write registers when the 2 GPIOs are down.
Signed-off-by: KancyJoe <kancy2333@outlook.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260522-topic-sm8650-ayaneo-pocket-s2-sgm3804-v5-2-bd6b1c300ecc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ldo_vcn33_[12]_wifi and ldo_vcn33_[12]_bt are just two regulator
outputs instead of four. The wifi and bt parts refer to separate enable
bits that are OR-ed together to affect the actual regulator output. The
separate bits allow the wifi and bt stacks to enable their power without
coordination between them. These have been deprecated in favor of proper
nodes matching the output.
Add proper ldo_vcn33_[12] regulators to replace the existing ones. The
enable status is synced to just one of the two enable bits, and the
other is forced off. This makes the handling in other bits simpler.
The existing *_(bt|wifi) regulators are converted to no-op regulators
that are fed from their new respective ldo_vcn33_[12] regulator. This
allows existing device trees to continue to work.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260514091520.2718987-7-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The MT6359 regulator DT binding defines the supply names for the PMIC.
Add support for them by adding .supply_name field settings for each
regulator. The buck regulators each have their own supply. The name
of the supply is related to the name of the buck regulator. The LDOs
have shared supplies.
Add the supply name to the declaration of each regulator. At the moment
they are declared explicitly, but the buck regulator macro can be made
to derive both the match string and supply name from the base name once
the *_sshub regulators are figured out and removed. For context, the
*_sshub regulators are not separate regulators, but separate settings
for the same name regulators without the "_sshub" suffix.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260514091520.2718987-6-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The regulator descriptions and extended descriptions don't change at
runtime. The only reason they are not const is that the regulator
driver data is non-const.
Const-ify the descriptions and all references to them. For the driver
data, explicitly cast it to non-const void *.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260514091520.2718987-5-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 64a6b57749 ("regulator: tps65219: Remove debugging helper
function") removed the tps65219_get_rdev_by_name() helper along with
the irq_data.rdev assignment that depended on it. This left
irq_data.rdev uninitialized for all IRQs, causing undefined behavior
when regulator_notifier_call_chain() is called from the IRQ handler:
Internal error: Oops: 0000000096000004
pc : regulator_notifier_call_chain
lr : tps65219_regulator_irq_handler
Call trace:
regulator_notifier_call_chain
tps65219_regulator_irq_handler
handle_nested_irq
regmap_irq_thread
irq_thread_fn
irq_thread
kthread
ret_from_fork
Instead of restoring a dedicated lookup array, restructure the probe
function to combine regulator registration with IRQ registration in
the same loop. This way the rdev returned by devm_regulator_register()
is naturally available for assigning to irq_data.rdev without any
auxiliary data structure.
Non-regulator IRQs (SENSOR, TIMEOUT) that don't correspond to any
registered regulator are registered with rdev=NULL, and the IRQ handler
is protected with a NULL check to avoid crashing.
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/aBDSTxALaOc-PD7X@gaggiata.pivistrello.it/
Reported-by: Francesco Dolcini <francesco@dolcini.it>
Fixes: 64a6b57749 ("regulator: tps65219: Remove debugging helper function")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/20260518083113.2063368-1-alexander.sverdlin@siemens.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver provides a gpio chip, which is only possible when GPIOLIB
is enabled, which was previously guaranteed by the CONFIG_OF_GPIO
dependency that is now gone:
ERROR: modpost: "gpiochip_get_data" [drivers/regulator/rpi-panel-attiny-regulator.ko] undefined!
ERROR: modpost: "devm_gpiochip_add_data_with_key" [drivers/regulator/rpi-panel-attiny-regulator.ko] undefined!
Add an explicit GPIOLIB dependency instead.
Fixes: bf017304fc ("regulator: drop unneeded dependencies on OF_GPIO")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260429135812.112514-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull regulator fix from Mark Brown:
"Just one trivial cleanup of the user visible prompts in Kconfig here,
standardising how we describe Qualcomm"
* tag 'regulator-fix-v7.1-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: qcom: Unify user-visible "Qualcomm" name
Pull regulator updates from Mark Brown:
"This has been a very quiet update for the regulator API, the bulk of
the diffstat is DT binding conversions and the most promient series in
the changelog is Johan Hovold cleaning up some leaks of OF nodes. For
some reason we have had several different people sending improvements
to better describe the parent supplies for existing regulators, these
look to be independent efforts.
The only new hardware support is for some Motorola custom varints of
cpcap"
* tag 'regulator-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (35 commits)
regulator: max77620: drop redundant OF node initialisation
regulator: bq257xx: Make OTG enable GPIO really optional
regulator: bq257xx: Remove reference to the parent MFD's dev
regulator: bd9571mwv: fix OF node reference imbalance
regulator: act8945a: fix OF node reference imbalance
regulator: s2dos05: fix OF node reference imbalance
regulator: mt6357: fix OF node reference imbalance
regulator: max77650: fix OF node reference imbalance
regulator: rk808: fix OF node reference imbalance
regulator: bq257xx: fix OF node reference imbalance
regulator: dt-bindings: qcom,qca6390-pmu: Document WCN6755 PMU
regulator: dt-bindings: regulator-max77620: convert to DT schema
regulator: mt6315: Add regulator supplies
regulator: dt-bindings: mt6315: Add regulator supplies
regulator: devres: Use enum regulator_get_type in internal functions
regulator: dt-bindings: mps,mp8859: convert to DT schema
regulator: da9121: Allow caching BUCK registers
regulator: dt-bindings: dlg,da9121: Add dlg,no-gpio-control
regulator: cros-ec: Add regulator supply
regulator: dt-bindings: cros-ec: Add regulator supply
...
Pull gpio updates from Bartosz Golaszewski:
"For this merge window we have two new drivers: support for
GPIO-signalled ACPI events on Intel platforms and a generic
GPIO-over-pinctrl driver using the ARM SCMI protocol for
controlling pins.
Several things have been reworked in GPIO core: we unduplicated GPIO
hog handling, reduced the number of SRCU locks and dereferences,
improved support for software-node-based lookup and removed more
legacy code after converting remaining users to modern alternatives.
There's also a number of driver reworks and refactoring, documentation
updates, some bug-fixes and new tests.
GPIO core:
- defer probe on software node lookups when the remote software node
exists but has not been registered as a firmware node yet
- unify GPIO hog handling by moving code duplicated in OF and ACPI
modules into GPIO core and allow setting up hogs with software
nodes
- allow matching GPIO controllers by secondary firmware node if
matching by primary does not succeed
- demote deferral warnings to debug level as they are quite normal
when using software nodes which don't support fw_devlink yet
- disable the legacy GPIO character device uAPI v1 supprt in Kconfig
by default
- rework several core functions in preparation for the upcoming
Revocable helper library for protecting resources against sudden
removal, this reduces the number of SRCU dereferences in GPIO core
- simplify file descriptor logic in GPIO character device code by
using FD_PREPARE()
- introduce a header defining symbols used by both GPIO consumers and
providers to avoid having to include provider-specific headers from
drivers which only consume GPIOs
- replace snprintf() with strscpy() where formatting is not required
New drivers:
- add the gpio-by-pinctrl generic driver using the ARM SCMI protocol
to control GPIOs (along with SCMI changes pulled from the pinctrl
tree)
- add a driver providing support for handling of platform events via
GPIO-signalled ACPI events (used on Intel Nova Lake and later
platforms)
Driver changes:
- extend the gpio-kempld driver with support for more recent models,
interrupts and setting/getting multiple values at once
- improve interrupt handling in gpio-brcmstb
- add support for multi-SoC systems in gpio-tegra186
- make sure we return correct values from the .get() callbacks in
several GPIO drivers by normalizing any values other than 0, 1 or
negative error numbers
- use flexible arrays in several drivers to reduce the number of
required memory allocations
- simplify synchronous waiting for virtual drivers to probe and
remove the dedicated, a bit overengineered helper library
dev-sync-probe
- remove unneeded Kconfig dependencies on OF_GPIO in several drivers
and subsystems
- convert the two remaining users of of_get_named_gpio() to using
GPIO descriptors and remove the (no longer used) function along
with the header that declares it
- add missing includes in gpio-mmio
- shrink and simplify code in gpio-max732x by using guard(mutex)
- remove duplicated code handling the 'ngpios' property from
gpio-ts4800, it's already handled in GPIO core
- use correct variable type in gpio-aspeed
- add support for a new model in gpio-realtek-otto
- allow to specify the active-low setting of simulated hogs over the
configfs interface (in addition to existing devicetree support) in
gpio-sim
Bug fixes:
- clear the OF_POPULATED flag on hog nodes in GPIO chip remove path
on OF systems
- fix resource leaks in error path in gpiochip_add_data_with_key()
- drop redundant device reference in gpio-mpsse
Tests:
- add selftests for use-after-free cases in GPIO character device
code
DT bindings:
- add a DT binding document for SCMI based, gpio-over-pinctrl devices
- fix interrupt description in microchip,mpfs-gpio
- add new compatible for gpio-realtek-otto
- describe the resets of the mpfs-gpio controller
- fix maintainer's email in gpio-delay bindings
- remove the binding document for cavium,thunder-8890 as the
corresponding device is bound over PCI and not firmware nodes
Documentation:
- update the recommended way of converting legacy boards to using
software nodes for GPIO description
- describe GPIO line value semantics
- misc updates to kerneldocs
Misc:
- convert OMAP1 ams-delta board to using GPIO hogs described with
software nodes"
* tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
gpio: swnode: defer probe on references to unregistered software nodes
dt-bindings: gpio: cavium,thunder-8890: Remove DT binding
Documentation: gpio: update the preferred method for using software node lookup
gpio: gpio-by-pinctrl: s/used to do/is used to do/
gpio: aspeed: fix unsigned long int declaration
gpio: rockchip: convert to dynamic GPIO base allocation
gpio: remove dev-sync-probe
gpio: virtuser: stop using dev-sync-probe
gpio: aggregator: stop using dev-sync-probe
gpio: sim: stop using dev-sync-probe
gpio: Add Intel Nova Lake ACPI GPIO events driver
gpiolib: Make deferral warnings debug messages
gpiolib: fix hogs with multiple lines
gpio: fix up CONFIG_OF dependencies
gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver
gpio: dt-bindings: Add GPIO on top of generic pin control
firmware: arm_scmi: Allow PINCTRL_REQUEST to return EOPNOTSUPP
pinctrl: scmi: ignore PIN_CONFIG_PERSIST_STATE
pinctrl: scmi: Delete PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS support
pinctrl: scmi: Add SCMI_PIN_INPUT_VALUE
...
Johan Hovold <johan@kernel.org> says:
These drivers reuse the OF node of their parent multi-function device
but fail to take another reference to balance the one dropped by the
platform bus code when unbinding the MFD and deregistering the child
devices.
Fix this by using the intended helper for reusing OF nodes.
Note that the first two patches will cause a trivial conflict with Doug's
series adding accessor functions for struct device flags which has now been
merged to the driver-core tree:
https://lore.kernel.org/r/20260406232444.3117516-1-dianders@chromium.org
Link: https://patch.msgid.link/20260408073055.5183-1-johan@kernel.org
The driver reuses the OF node of the parent multi-function device but
fails to take another reference to balance the one dropped by the
platform bus code when unbinding the MFD and deregistering the child
devices.
Fix this by using the intended helper for reusing OF nodes.
Fixes: dafc7cde23 ("regulator: add mt6357 regulator")
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260408073055.5183-5-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ROHM BD72720 supports so called LDON-HEAD -mode, in which the buck10
is expected to be supplying power for an LDO. In this mode, the buck10
voltage will follow what is set for the LDO, on order to lower the
power-loss in the LDO.
This hardware configuration can be adverticed via the device-tree. When
this is done, the Linux driver should omit registering the voltage
control operations for the buck10, because the voltage control is now
done by the hardware.
This is done by modifying the buck10 regulator descriptor, before
passing it to the regulator registration functions. There is an
off-by-one error when the regulator descriptor array is indexed, and
wrong descriptor is modified causing the LDO1 operations to be modified
instead of the BUCK10 operations.
Fix this by correcting the indexing.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: f16a9d76a7 ("regulator: bd71828: Support ROHM BD72720")
Link: https://patch.msgid.link/e7eef0bd407522ae5d9b7d0c4ec43f40b1dba833.1775565148.git.mazziesaccount@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Chen-Yu Tsai <wenst@chromium.org> says:
This series is part of a broader collection of regulator related
cleanups for MediaTek Chromebooks. This one covers the MT6315 PMIC.
Patch 1 adds the names of the power supply inputs to the binding.
Patch 2 adds the supply names from the DT binding change in patch 1
to the regulator descriptions in the driver. This patch has a
checkpatch.pl warnings, but I wonder if it's because the context size
for checking complex macros is not large enough.
Device tree changes will be sent separately. The goal is to get the
regulator tree as complete as possible. This includes adding supply
names to other regulator DT bindings, and adding all the supply links
to the existing DTs.
