The GSP path reuses the GV100 direct-MMIO infoframe writers on every
chip. On GB20x that is only half right as while the legacy SF AVI unit is
unchanged, the legacy VSI unit at 0x6f0100 was removed, so
gv100_sor_hdmi_infoframe_vsi() writes into a reserved area and no vendor
infoframe ever reaches the HW. This affects HDMI-VIC signalling which
can impact some 4K modes for legacy HDMI 1.4 sinks.
GB20x (NVDisplay 5.0+) reorganised the SF HDMI packet units. Per NVIDIA's
published C971/CA71 DISP_SF_USER class headers, only three legacy units
remain (AVI at +0x000, GCP at +0x040, ACR at +0x080), and vendor
infoframes must instead be sent through the shared generic infoframe
units at +0x130, whose 9-dword packet slots are loaded through the
shared data port at +0x3f0/+0x3f4.
Add a VSI writer using the same programming sequence OpenRM uses on
these chips (nvhdmipkt_C971.c, programAdvancedInfoframeC971()): disable
the unit and wait for it to idle, clear the SENT status, write the packet
through the data port with a zero inserted in HB3 after the three header
bytes, then enable the unit for every-frame transmission during vblank.
Generic unit 1 is used for the VSI, matching the slot assignment in
NVIDIA's nvkms (NVHDMIPKT_TYPE_SHARED_GENERIC2, unit 0 is reserved
for extended metadata packets and unit 2 for the HDR DRM infoframe,
if those are wired up later).
GB20x so far shared GA10x's display entry point. Give it its own,
gb202_disp_new(), with a gb202_gsp_disp table that supplies the VSI
writer to the GSP path and otherwise carries the same hooks as GA10x.
The following fixes fill in the rest of the GB20x differences there.
Fixes: 6cc6e08d45 ("drm/nouveau/kms: add support for GB20x")
Cc: stable@vger.kernel.org
Signed-off-by: Mohamed Ahmed <mohamedahmedegypt2001@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260825001408.14219-5-mohamedahmedegypt2001@gmail.com
92f09dcb4e