Wen Gong 7fd85517c3 ath11k: mac: remove unused conf_mutex to solve a deadlock
The conf_mutex is not use and lead below deadlock, remove it to solve
the deadlock issue.

[   44.967496] NET: Registered protocol family 42
[   45.119629] ath11k_pci 0000:06:00.0: WARNING: ath11k PCI support is experimental!
[   45.120087] ath11k_pci 0000:06:00.0: BAR 0: assigned [mem 0xdc000000-0xdc0fffff 64bit]
[   45.120108] ath11k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[   45.206525] ath11k_pci 0000:06:00.0: aspm 0x42 changed to 0x40
[   45.207430] mhi 0000:06:00.0: Requested to power ON
[   45.208609] mhi 0000:06:00.0: Power on setup success
[   46.190711] ath11k_pci 0000:06:00.0: chip_id 0x0 chip_family 0xb board_id 0x101 soc_id 0xffffffff
[   46.190729] ath11k_pci 0000:06:00.0: fw_version 0x306a70f fw_build_timestamp 2000-01-01 00:00 fw_build_id
1]: Starting Load/Save RF Kill Switch Status...
[   46.385118] ath11k_pci 0000:06:00.0 wlp6s0: renamed from wlan0
1]: Started Load/Save RF Kill Switch Status.
[   53.566669] wlp6s0: authenticate with 00:03:7f:48:dd:bf
[   53.809092] wlp6s0: send auth to 00:03:7f:48:dd:bf (try 1/3)
[   53.816490] wlp6s0: authenticated
[   53.818618] wlp6s0: associate with 00:03:7f:48:dd:bf (try 1/3)
[   53.820839] wlp6s0: RX AssocResp from 00:03:7f:48:dd:bf (capab=0x1 status=0 aid=2)
[   53.834859]
[   53.834861] ======================================================
[   53.834862] WARNING: possible circular locking dependency detected
[   53.834863] 5.9.0-rc5-wt-ath+ #198 Not tainted
[   53.834864] ------------------------------------------------------
[   53.834865] kworker/u16:3/166 is trying to acquire lock:
[   53.834866] ffff8c4b37184f78 (&ar->conf_mutex){+.+.}-{3:3}, at: ath11k_mac_op_config+0x16/0x30 [ath11k]
[   53.834875]
[   53.834875] but task is already holding lock:
[   53.834876] ffff8c4b37182808 (&local->iflist_mtx){+.+.}-{3:3}, at: ieee80211_set_associated+0x167/0x360
[   53.834879]
[   53.834879] which lock already depends on the new lock.
[   53.834879]
[   53.834880]
[   53.834880] the existing dependency chain (in reverse order) is:
[   53.834881]
[   53.834881] -> #1 (&local->iflist_mtx){+.+.}-{3:3}:
[   53.834884]        __lock_acquire+0x3bf/0x6e0
[   53.834886]        lock_acquire+0xb6/0x270
[   53.834887]        __mutex_lock+0x88/0x8e0
[   53.834890]        ieee80211_set_hw_80211_encap+0x3e/0x1f0
[   53.834895]        ath11k_mac_op_add_interface+0x348/0x7f0 [ath11k]
[   53.834897]        drv_add_interface+0x7c/0x190
[   53.834899]        ieee80211_do_open+0x552/0x9a0
[   53.834901]        __dev_open+0xe5/0x190
[   53.834902]        __dev_change_flags+0x1c6/0x230
[   53.834903]        dev_change_flags+0x1c/0x50
[   53.834905]        do_setlink+0x246/0xc60
[   53.834906]        __rtnl_newlink+0x607/0x990
[   53.834907]        rtnl_newlink+0x3f/0x60
[   53.834908]        rtnetlink_rcv_msg+0x174/0x490
[   53.834910]        netlink_rcv_skb+0x42/0x100
[   53.834911]        netlink_unicast+0x18c/0x250
[   53.834912]        netlink_sendmsg+0x227/0x460
[   53.834914]        sock_sendmsg+0x59/0x60
[   53.834915]        ____sys_sendmsg+0x1f5/0x230
[   53.834916]        ___sys_sendmsg+0x70/0xb0
[   53.834917]        __sys_sendmsg+0x54/0xa0
[   53.834919]        do_syscall_64+0x33/0x40
[   53.834920]        entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   53.834921]
[   53.834921] -> #0 (&ar->conf_mutex){+.+.}-{3:3}:
[   53.834923]        check_prev_add+0x98/0x9f0
[   53.834925]        validate_chain+0x404/0x6c0
[   53.834926]        __lock_acquire+0x3bf/0x6e0
[   53.834927]        lock_acquire+0xb6/0x270
[   53.834929]        __mutex_lock+0x88/0x8e0
[   53.834934]        ath11k_mac_op_config+0x16/0x30 [ath11k]
[   53.834935]        ieee80211_hw_config+0xb3/0x270
[   53.834937]        ieee80211_set_associated+0x17c/0x360
[   53.834938]        ieee80211_assoc_success.constprop.0+0x5a2/0xc80
[   53.834940]        ieee80211_rx_mgmt_assoc_resp+0x16a/0x350
[   53.834941]        ieee80211_sta_rx_queued_mgmt+0xca/0x410
[   53.834943]        ieee80211_iface_work+0x1f3/0x350
[   53.834945]        process_one_work+0x265/0x5d0
[   53.834946]        worker_thread+0x49/0x300
[   53.834948]        kthread+0x135/0x150
[   53.834949]        ret_from_fork+0x22/0x30
[   53.834950]
[   53.834950] other info that might help us debug this:
[   53.834950]
[   53.834951]  Possible unsafe locking scenario:
[   53.834951]
[   53.834952]        CPU0                    CPU1
[   53.834952]        ----                    ----
[   53.834953]   lock(&local->iflist_mtx);
[   53.834954]                                lock(&ar->conf_mutex);
[   53.834955]                                lock(&local->iflist_mtx);
[   53.834956]   lock(&ar->conf_mutex);
[   53.834957]
[   53.834957]  *** DEADLOCK ***
[   53.834957]
[   53.834958] 4 locks held by kworker/u16:3/166:
[   53.834959]  #0: ffff8c4b37c22948 ((wq_completion)phy0){+.+.}-{0:0}, at: process_one_work+0x1d3/0x5d0
[   53.834961]  #1: ffffa98300abfe70 ((work_completion)(&sdata->work)){+.+.}-{0:0}, at: process_one_work+0x1d3/0x5d0
[   53.834963]  #2: ffff8c4b371e4cd0 (&wdev->mtx){+.+.}-{3:3}, at: ieee80211_sta_rx_queued_mgmt+0x4b/0x410
[   53.834965]  #3: ffff8c4b37182808 (&local->iflist_mtx){+.+.}-{3:3}, at: ieee80211_set_associated+0x167/0x360
[   53.834968]
[   53.834968] stack backtrace:
[   53.834969] CPU: 1 PID: 166 Comm: kworker/u16:3 Not tainted 5.9.0-rc5-wt-ath+ #198
[   53.834970] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0049.2018.0801.1601 08/01/2018
[   53.834972] Workqueue: phy0 ieee80211_iface_work
[   53.834974] Call Trace:
[   53.834976]  dump_stack+0x77/0xa0
[   53.834978]  check_noncircular+0x15d/0x180
[   53.834980]  check_prev_add+0x98/0x9f0
[   53.834982]  ? add_chain_cache+0x143/0x440
[   53.834984]  validate_chain+0x404/0x6c0
[   53.834986]  __lock_acquire+0x3bf/0x6e0
[   53.834988]  lock_acquire+0xb6/0x270
[   53.834993]  ? ath11k_mac_op_config+0x16/0x30 [ath11k]
[   53.834999]  ? ath11k_mac_op_config+0x16/0x30 [ath11k]
[   53.835001]  __mutex_lock+0x88/0x8e0
[   53.835006]  ? ath11k_mac_op_config+0x16/0x30 [ath11k]
[   53.835007]  ? sched_clock_cpu+0xc/0xb0
[   53.835009]  ? __lock_release+0x179/0x2c0
[   53.835014]  ath11k_mac_op_config+0x16/0x30 [ath11k]
[   53.835016]  ieee80211_hw_config+0xb3/0x270
[   53.835018]  ieee80211_set_associated+0x17c/0x360
[   53.835019]  ieee80211_assoc_success.constprop.0+0x5a2/0xc80
[   53.835021]  ? lockdep_hardirqs_on_prepare.part.0+0x9f/0x140
[   53.835023]  ? cmpxchg_double_slab.constprop.0+0x185/0x1a0
[   53.835025]  ? trace_hardirqs_on+0x1c/0x100
[   53.835027]  ? __slab_free+0x8f/0x330
[   53.835029]  ? slab_free_freelist_hook+0xf8/0x150
[   53.835031]  ? ieee802_11_parse_elems_crc+0x147/0x1d0
[   53.835032]  ? kfree+0x2b0/0x2d0
[   53.835034]  ? ieee802_11_parse_elems_crc+0x147/0x1d0
[   53.835036]  ieee80211_rx_mgmt_assoc_resp+0x16a/0x350
[   53.835041]  ieee80211_sta_rx_queued_mgmt+0xca/0x410
[   53.835043]  ? __lock_acquire+0x3bf/0x6e0
[   53.835045]  ? lock_acquire+0xb6/0x270
[   53.835046]  ? skb_dequeue+0x13/0x70
[   53.835048]  ? find_held_lock+0x32/0x90
[   53.835049]  ? sched_clock_cpu+0xc/0xb0
[   53.835051]  ? mark_held_locks+0x50/0x80
[   53.835053]  ? lockdep_hardirqs_on_prepare.part.0+0x9f/0x140
[   53.835054]  ? _raw_spin_unlock_irqrestore+0x34/0x40
[   53.835056]  ? trace_hardirqs_on+0x1c/0x100
[   53.835058]  ieee80211_iface_work+0x1f3/0x350
[   53.835060]  process_one_work+0x265/0x5d0
[   53.835062]  worker_thread+0x49/0x300
[   53.835063]  ? process_one_work+0x5d0/0x5d0
[   53.835065]  kthread+0x135/0x150
[   53.835066]  ? kthread_create_worker_on_cpu+0x60/0x60
[   53.835068]  ret_from_fork+0x22/0x30
[   53.835075] wlp6s0: associated
[   53.835132] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601463073-12106-4-git-send-email-kvalo@codeaurora.org
2020-10-01 22:32:10 +03:00

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.
Description
No description provided
Readme 3.4 GiB
Languages
C 97%
Assembly 1%
Shell 0.6%
Rust 0.5%
Python 0.4%
Other 0.3%