ad2s1210_trigger_handler() walks several scan-mask branches and uses
"goto error_ret" to land on the iio_trigger_notify_done() teardown at
the bottom of the function for every I/O error -- except the
MOD_CONFIG fault-register read, which uses a bare "return ret":
if (st->fixed_mode == MOD_CONFIG) {
unsigned int reg_val;
ret = regmap_read(st->regmap, AD2S1210_REG_FAULT, ®_val);
if (ret < 0)
return ret;
...
}
Two problems on that path:
- the handler returns a negative errno where the prototype expects
an irqreturn_t (IRQ_HANDLED / IRQ_NONE), so the caller in the
IIO core sees a value outside the enum;
- iio_trigger_notify_done() is skipped, leaving the trigger
busy-flag set. A single transient SPI/regmap error on the fault
read then wedges the trigger so subsequent samples are dropped
until the consumer is detached.
Convert the error path to "goto error_ret" so the failure path goes
through the same notify_done() teardown as every other error in the
handler.
Fixes: f9b9ff95be ("iio: resolver: ad2s1210: add support for adi,fixed-mode")
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
70247658d0