mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-05-14 07:42:38 -04:00
51bf9d60fb
There are two variants of TP-Link Archer T2UHP V1, which are US and UN: https://www.tp-link.com/us/support/download/archer-t2uhp/ https://www.tp-link.com/hk/support/download/archer-t2uhp/v1/ From the driver source code provided by the vendor: https://www.tp-link.com/hk/support/download/archer-t2uhp/v1/#Driver eric@eric-VirtualBox:~/src$ grep -n USB_DEVICE.*0x2357 DPA_mt7610u_wifi_sta_v3004_rev1_20140529/NETIF/common/rtusb_dev_id.c 45: {USB_DEVICE(0x2357,0x0105)}, /* T1Uv1 */ 46: {USB_DEVICE(0x2357,0x010B)}, /* T2UHP_UN_v1 */ 47: {USB_DEVICE(0x2357,0x0123)}, /* T2UHP_US_v1 */ eric@eric-VirtualBox:~/src$ lsusb -d 2357: Bus 001 Device 003: ID 2357:010b TP-Link WiFi eric@eric-VirtualBox:~/src$ sudo modprobe mt76x0u eric@eric-VirtualBox:~/src$ sudo sh -c "echo 2357 010b > /sys/bus/usb/drivers/mt76x0u/new_id" [snip] eric@eric-VirtualBox:~/src$ ifconfig -a enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 08:00:27:74:d9:ee txqueuelen 1000 (Ethernet) RX packets 78 bytes 16146 (16.1 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 75 bytes 8413 (8.4 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 56 bytes 5496 (5.4 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 56 bytes 5496 (5.4 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlx18d6c71b6e3e: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.106 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::21c7:2d90:e47d:ee48 prefixlen 64 scopeid 0x20<link> ether 18:d6:c7:1b:6e:3e txqueuelen 1000 (Ethernet) RX packets 37 bytes 5345 (5.3 KB) RX errors 0 dropped 7 overruns 0 frame 0 TX packets 77 bytes 10513 (10.5 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eric@eric-VirtualBox:~/src$ dmesg | tail -n 30 12:51:25.551584 main Log opened 2021-03-01T12:51:25.551572000Z [ 46.855763] 12:51:25.551995 main OS Product: Linux [ 46.855838] 12:51:25.552075 main OS Release: 5.4.0-66-generic [ 46.855897] 12:51:25.552150 main OS Version: #74-Ubuntu SMP Wed Jan 27 22:54:38 UTC 2021 [ 46.855971] 12:51:25.552207 main Executable: /opt/VBoxGuestAdditions-6.1.16/sbin/VBoxService 12:51:25.552208 main Process ID: 898 12:51:25.552209 main Package type: LINUX_64BITS_GENERIC [ 46.858699] 12:51:25.554921 main 6.1.16 r140961 started. Verbose level = 0 [ 46.863116] 12:51:25.559319 main vbglR3GuestCtrlDetectPeekGetCancelSupport: Supported (#1) [ 140.687550] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 140.838279] usb 1-2: New USB device found, idVendor=2357, idProduct=010b, bcdDevice= 1.00 [ 140.838281] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 140.838283] usb 1-2: Product: WiFi [ 140.838284] usb 1-2: Manufacturer: MediaTek [ 140.838285] usb 1-2: SerialNumber: 1.0 [ 178.374187] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 178.378370] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 178.417507] usbcore: registered new interface driver mt76x0u [ 178.557165] usb 1-2: reset high-speed USB device number 3 using xhci_hcd [ 178.720436] mt76x0u 1-2:1.0: ASIC revision: 76100002 MAC revision: 76502000 [ 180.156077] mt76x0u 1-2:1.0: EEPROM ver:02 fae:04 [ 181.190558] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 181.225560] mt76x0u 1-2:1.0 wlx18d6c71b6e3e: renamed from wlan0 [ 188.660826] wlx18d6c71b6e3e: authenticate with d0:17:c2:e0:d7:9c [ 189.447781] wlx18d6c71b6e3e: send auth to d0:17:c2:e0:d7:9c (try 1/3) [ 189.618282] wlx18d6c71b6e3e: authenticated [ 189.619008] wlx18d6c71b6e3e: associate with d0:17:c2:e0:d7:9c (try 1/3) [ 189.715268] wlx18d6c71b6e3e: RX AssocResp from d0:17:c2:e0:d7:9c (capab=0x1011 status=0 aid=8) [ 189.734720] wlx18d6c71b6e3e: associated [ 190.233239] IPv6: ADDRCONF(NETDEV_CHANGE): wlx18d6c71b6e3e: link becomes ready Signed-off-by: Eric Y.Y. Wong <eric.wongyeungyan@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.