Ivan Vecera 486b9eee57 ice: Fix race during aux device (un)plugging
Function ice_plug_aux_dev() assigns pf->adev field too early prior
aux device initialization and on other side ice_unplug_aux_dev()
starts aux device deinit and at the end assigns NULL to pf->adev.
This is wrong because pf->adev should always be non-NULL only when
aux device is fully initialized and ready. This wrong order causes
a crash when ice_send_event_to_aux() call occurs because that function
depends on non-NULL value of pf->adev and does not assume that
aux device is half-initialized or half-destroyed.
After order correction the race window is tiny but it is still there,
as Leon mentioned and manipulation with pf->adev needs to be protected
by mutex.

Fix (un-)plugging functions so pf->adev field is set after aux device
init and prior aux device destroy and protect pf->adev assignment by
new mutex. This mutex is also held during ice_send_event_to_aux()
call to ensure that aux device is valid during that call.
Note that device lock used ice_send_event_to_aux() needs to be kept
to avoid race with aux drv unload.

Reproducer:
cycle=1
while :;do
        echo "#### Cycle: $cycle"

        ip link set ens7f0 mtu 9000
        ip link add bond0 type bond mode 1 miimon 100
        ip link set bond0 up
        ifenslave bond0 ens7f0
        ip link set bond0 mtu 9000
        ethtool -L ens7f0 combined 1
        ip link del bond0
        ip link set ens7f0 mtu 1500
        sleep 1

        let cycle++
done

In short when the device is added/removed to/from bond the aux device
is unplugged/plugged. When MTU of the device is changed an event is
sent to aux device asynchronously. This can race with (un)plugging
operation and because pf->adev is set too early (plug) or too late
(unplug) the function ice_send_event_to_aux() can touch uninitialized
or destroyed fields. In the case of crash below pf->adev->dev.mutex.

Crash:
[   53.372066] bond0: (slave ens7f0): making interface the new active one
[   53.378622] bond0: (slave ens7f0): Enslaving as an active interface with an u
p link
[   53.386294] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[   53.549104] bond0: (slave ens7f1): Enslaving as a backup interface with an up
 link
[   54.118906] ice 0000:ca:00.0 ens7f0: Number of in use tx queues changed inval
idating tc mappings. Priority traffic classification disabled!
[   54.233374] ice 0000:ca:00.1 ens7f1: Number of in use tx queues changed inval
idating tc mappings. Priority traffic classification disabled!
[   54.248204] bond0: (slave ens7f0): Releasing backup interface
[   54.253955] bond0: (slave ens7f1): making interface the new active one
[   54.274875] bond0: (slave ens7f1): Releasing backup interface
[   54.289153] bond0 (unregistering): Released all slaves
[   55.383179] MII link monitoring set to 100 ms
[   55.398696] bond0: (slave ens7f0): making interface the new active one
[   55.405241] BUG: kernel NULL pointer dereference, address: 0000000000000080
[   55.405289] bond0: (slave ens7f0): Enslaving as an active interface with an u
p link
[   55.412198] #PF: supervisor write access in kernel mode
[   55.412200] #PF: error_code(0x0002) - not-present page
[   55.412201] PGD 25d2ad067 P4D 0
[   55.412204] Oops: 0002 [#1] PREEMPT SMP NOPTI
[   55.412207] CPU: 0 PID: 403 Comm: kworker/0:2 Kdump: loaded Tainted: G S
           5.17.0-13579-g57f2d6540f03 #1
[   55.429094] bond0: (slave ens7f1): Enslaving as a backup interface with an up
 link
[   55.430224] Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.4.4 10/07/
2021
[   55.430226] Workqueue: ice ice_service_task [ice]
[   55.468169] RIP: 0010:mutex_unlock+0x10/0x20
[   55.472439] Code: 0f b1 13 74 96 eb e0 4c 89 ee eb d8 e8 79 54 ff ff 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 65 48 8b 04 25 40 ef 01 00 31 d2 <f0> 48 0f b1 17 75 01 c3 e9 e3 fe ff ff 0f 1f 00 0f 1f 44 00 00 48
[   55.491186] RSP: 0018:ff4454230d7d7e28 EFLAGS: 00010246
[   55.496413] RAX: ff1a79b208b08000 RBX: ff1a79b2182e8880 RCX: 0000000000000001
[   55.503545] RDX: 0000000000000000 RSI: ff4454230d7d7db0 RDI: 0000000000000080
[   55.510678] RBP: ff1a79d1c7e48b68 R08: ff4454230d7d7db0 R09: 0000000000000041
[   55.517812] R10: 00000000000000a5 R11: 00000000000006e6 R12: ff1a79d1c7e48bc0
[   55.524945] R13: 0000000000000000 R14: ff1a79d0ffc305c0 R15: 0000000000000000
[   55.532076] FS:  0000000000000000(0000) GS:ff1a79d0ffc00000(0000) knlGS:0000000000000000
[   55.540163] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   55.545908] CR2: 0000000000000080 CR3: 00000003487ae003 CR4: 0000000000771ef0
[   55.553041] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   55.560173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   55.567305] PKRU: 55555554
[   55.570018] Call Trace:
[   55.572474]  <TASK>
[   55.574579]  ice_service_task+0xaab/0xef0 [ice]
[   55.579130]  process_one_work+0x1c5/0x390
[   55.583141]  ? process_one_work+0x390/0x390
[   55.587326]  worker_thread+0x30/0x360
[   55.590994]  ? process_one_work+0x390/0x390
[   55.595180]  kthread+0xe6/0x110
[   55.598325]  ? kthread_complete_and_exit+0x20/0x20
[   55.603116]  ret_from_fork+0x1f/0x30
[   55.606698]  </TASK>

Fixes: f9f5301e7e ("ice: Register auxiliary device to provide RDMA")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-06 10:09:24 -07:00
2022-05-05 18:12:44 -07:00
2022-05-01 13:57:58 -07:00

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.
Description
No description provided
Readme 3.6 GiB
Languages
C 97%
Assembly 1%
Shell 0.6%
Rust 0.5%
Python 0.4%
Other 0.3%