Pull erofs fixes from Gao Xiang:
- Properly handle errors when file-backed I/O fails
- Fix compilation issues on ARM platform (arm-linux-gnueabi)
- Fix parsing of encoded extents
- Minor cleanup
* tag 'erofs-for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: remove duplicate code
erofs: fix encoded extents handling
erofs: add __packed annotation to union(__le16..)
erofs: set error to bio if file-backed IO fails
Pull ext4 fixes from Ted Ts'o:
"A few more miscellaneous ext4 bug fixes and cleanups including some
syzbot failures and fixing a stale file handing refeencing an inode
previously used as a regular file, but which has been deleted and
reused as an ea_inode would result in ext4 erroneously considering
this a case of fs corruption"
* tag 'ext4_for_linus-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off-by-one error in do_split
ext4: make block validity check resistent to sb bh corruption
ext4: avoid -Wflex-array-member-not-at-end warning
Documentation: ext4: Add fields to ext4_super_block documentation
ext4: don't treat fhandle lookup of ea_inode as FS corruption
Pull memblock fix from Mike Rapoport:
"Fix build of memblock test.
Add missing stubs for mutex and free_reserved_area() to memblock
tests"
* tag 'fixes-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: Fix mutex related build error
Syzkaller detected a use-after-free issue in ext4_insert_dentry that was
caused by out-of-bounds access due to incorrect splitting in do_split.
BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847
CPU: 0 UID: 0 PID: 5847 Comm: syz-executor335 Not tainted 6.12.0-rc6-syzkaller-00318-ga9cda7c0ffed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
__asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
add_dirent_to_buf+0x3d9/0x750 fs/ext4/namei.c:2154
make_indexed_dir+0xf98/0x1600 fs/ext4/namei.c:2351
ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2455
ext4_add_nondir+0x8d/0x290 fs/ext4/namei.c:2796
ext4_symlink+0x920/0xb50 fs/ext4/namei.c:3431
vfs_symlink+0x137/0x2e0 fs/namei.c:4615
do_symlinkat+0x222/0x3a0 fs/namei.c:4641
__do_sys_symlink fs/namei.c:4662 [inline]
__se_sys_symlink fs/namei.c:4660 [inline]
__x64_sys_symlink+0x7a/0x90 fs/namei.c:4660
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
The following loop is located right above 'if' statement.
for (i = count-1; i >= 0; i--) {
/* is more than half of this entry in 2nd half of the block? */
if (size + map[i].size/2 > blocksize/2)
break;
size += map[i].size;
move++;
}
'i' in this case could go down to -1, in which case sum of active entries
wouldn't exceed half the block size, but previous behaviour would also do
split in half if sum would exceed at the very last block, which in case of
having too many long name files in a single block could lead to
out-of-bounds access and following use-after-free.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Fixes: 5872331b3d ("ext4: fix potential negative array index in do_split()")
Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250404082804.2567-3-a.sadovnikov@ispras.ru
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Block validity checks need to be skipped in case they are called
for journal blocks since they are part of system's protected
zone.
Currently, this is done by checking inode->ino against
sbi->s_es->s_journal_inum, which is a direct read from the ext4 sb
buffer head. If someone modifies this underneath us then the
s_journal_inum field might get corrupted. To prevent against this,
change the check to directly compare the inode with journal->j_inode.
**Slight change in behavior**: During journal init path,
check_block_validity etc might be called for journal inode when
sbi->s_journal is not set yet. In this case we now proceed with
ext4_inode_block_valid() instead of returning early. Since systems zones
have not been set yet, it is okay to proceed so we can perform basic
checks on the blocks.
Suggested-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/0c06bc9ebfcd6ccfed84a36e79147bf45ff5adc1.1743142920.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
fs/ext4/mballoc.c:3041:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/Z-SF97N3AxcIMlSi@kspp
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Documentation and implementation of the ext4 super block have
slightly diverged: Padding has been removed in order to make room for
new fields that are still missing in the documentation.
Add the new fields s_encryption_level, s_first_error_errorcode,
s_last_error_errorcode to the documentation of the ext4 super block.
Fixes: f542fbe8d5 ("ext4 crypto: reserve codepoints used by the ext4 encryption feature")
Fixes: 878520ac45 ("ext4: save the error code which triggered an ext4_error() in the superblock")
Signed-off-by: Tom Vierjahn <tom.vierjahn@acm.org>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20250324221004.5268-1-tom.vierjahn@acm.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull tracing fixes from Steven Rostedt:
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not
defined. Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s"
for dynamic size strings even though the user space exported
arguments had only __get_str() macro that provided just a nul
terminated string. This was fixed so that user space could parse this
properly.
But the reason that it had "%.*s" was because internally it provided
the maximum size of the string as one of the arguments. The fix that
replaced "%.*s" with "%s" caused the trace output (when the kernel
reads the event) to write "(efault)" as it would now read the length
of the string as "%s".
As the string provided is always nul terminated, there's no reason
for the internal code to use "%.*s" anyway. Just remove the length
argument to match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a
way to have a single ftrace_ops registered with ftrace to determine
what functions will call the ftrace_ops callback. More than one user
of function graph can register a ftrace_ops with it. The function
graph infrastructure will then add this ftrace_ops as a subops with
the main ftrace_ops it registers with ftrace. This is because the
functions will always call the function graph callback which in turn
calls the subops ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will
update the main ftrace_ops hash to include the functions it wants.
This is the logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" where
all the functions in the filter_hash but not in the notrace_hash are
attached by ftrace. The original logic would have the main ftrace_ops
filter_hash be a union of all the subops filter_hashes and the main
notrace_hash would be a intersect of all the subops filter hashes.
But this was incorrect because the notrace hash depends on the
filter_hash it is associated to and not the union of all
filter_hashes.
Instead, when a subops is added, just include all the functions of
the subops hash that are in its filter_hash but not in its
notrace_hash. The main subops hash should not use its notrace hash,
unless all of its subops hashes have an empty filter_hash (which
means to attach to all functions), and then, and only then, the main
ftrace_ops notrace hash can be the intersect of all the subops
hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and
called print_graph_retval() and also printed a newline. The
print_graph_retval() also prints a newline which caused blank lines
to be printed in the function graph tracer when retval was added.
This caused one of the selftests to fail if retvals were enabled.
Instead remove the new line output from print_graph_retval() and have
the callers always print the new line so that it doesn't have to do
special logic if it calls print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the
link list it references the next entry, which is the list head and
causes an out-of-bound memory access.
* tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix out-of-bound memory access in rv_is_container_monitor()
ftrace: Do not have print_graph_retval() add a newline
tracing/selftest: Add test to better test subops filtering of function graph
ftrace: Fix accounting of subop hashes
ftrace: Properly merge notrace hashes
tracing: Do not add length to print format in synthetic events
tracing: Hide get_vm_area() from MMUless builds
Pull bpf fixes from Alexei Starovoitov:
- Followup fixes for resilient spinlock (Kumar Kartikeya Dwivedi):
- Make res_spin_lock test less verbose, since it was spamming BPF
CI on failure, and make the check for AA deadlock stronger
- Fix rebasing mistake and use architecture provided
res_smp_cond_load_acquire
- Convert BPF maps (queue_stack and ringbuf) to resilient spinlock
to address long standing syzbot reports
- Make sure that classic BPF load instruction from SKF_[NET|LL]_OFF
offsets works when skb is fragmeneted (Willem de Bruijn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Convert ringbuf map to rqspinlock
bpf: Convert queue_stack map to rqspinlock
bpf: Use architecture provided res_smp_cond_load_acquire
selftests/bpf: Make res_spin_lock AA test condition stronger
selftests/net: test sk_filter support for SKF_NET_OFF on frags
bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
selftests/bpf: Make res_spin_lock test less verbose
When rv_is_container_monitor() is called on the last monitor in
rv_monitors_list, KASAN yells:
BUG: KASAN: global-out-of-bounds in rv_is_container_monitor+0x101/0x110
Read of size 8 at addr ffffffff97c7c798 by task setup/221
The buggy address belongs to the variable:
rv_monitors_list+0x18/0x40
This is due to list_next_entry() is called on the last entry in the list.
It wraps around to the first list_head, and the first list_head is not
embedded in struct rv_monitor_def.
Fix it by checking if the monitor is last in the list.
Cc: stable@vger.kernel.org
Cc: Gabriele Monaco <gmonaco@redhat.com>
Fixes: cb85c660fc ("rv: Add option for nested monitors and include sched")
Link: https://lore.kernel.org/e85b5eeb7228bfc23b8d7d4ab5411472c54ae91b.1744355018.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The retval and retaddr options for function_graph tracer will add a
comment at the end of a function for both leaf and non leaf functions that
looks like:
__wake_up_common(); /* ret=0x1 */
} /* pick_next_task_fair ret=0x0 */
The function print_graph_retval() adds a newline after the "*/". But if
that's not called, the caller function needs to make sure there's a
newline added.
This is confusing and when the function parameters code was added, it
added a newline even when calling print_graph_retval() as the fact that
the print_graph_retval() function prints a newline isn't obvious.
This caused an extra newline to be printed and that made it fail the
selftests when the retval option was set, as the selftests were not
expecting blank lines being injected into the trace.
Instead of having print_graph_retval() print a newline, just have the
caller always print the newline regardless if it calls print_graph_retval()
or not. This not only fixes this bug, but it also simplifies the code.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250411133015.015ca393@gandalf.local.home
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/ccc40f2b-4b9e-4abd-8daf-d22fce2a86f0@sirena.org.uk/
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull pwm fixes from Uwe Kleine-König:
"A set of fixes for pwm core and various drivers
The first three patches handle clk_get_rate() returning 0 (which might
happen for example if the CCF is disabled). The first of these was
found because this triggered a warning with clang, the two others by
looking for similar issues in other drivers.
The remaining three fixes address issues in the new waveform pwm API.
Now that I worked on this a bit more, the finer details and corner
cases are better understood and the code is fixed accordingly"
* tag 'pwm/for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: axi-pwmgen: Let .round_waveform_tohw() signal when request was rounded up
pwm: stm32: Search an appropriate duty_cycle if period cannot be modified
pwm: Let pwm_set_waveform() succeed even if lowlevel driver rounded up
pwm: fsl-ftm: Handle clk_get_rate() returning 0
pwm: rcar: Improve register calculation
pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()
Pull smb client fixes from Steve French:
- Fix multichannel decryption UAF
- Fix regression mounting to onedrive shares
- Fix missing mount option check for posix vs. noposix
- Fix version field in WSL symlinks
- Three minor cleanup to reparse point handling
- SMB1 fix for WSL special files
- SMB1 Kerberos fix
- Add SMB3 defines for two new FS attributes
* tag 'v6.15-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: Add defines for two new FileSystemAttributes
cifs: Fix querying of WSL CHR and BLK reparse points over SMB1
cifs: Split parse_reparse_point callback to functions: get buffer and parse buffer
cifs: Improve handling of name surrogate reparse points in reparse.c
cifs: Remove explicit handling of IO_REPARSE_TAG_MOUNT_POINT in inode.c
cifs: Fix encoding of SMB1 Session Setup Kerberos Request in non-UNICODE mode
smb: client: fix UAF in decryption with multichannel
cifs: Fix support for WSL-style symlinks
smb311 client: fix missing tcon check when mounting with linux/posix extensions
cifs: Ensure that all non-client-specific reparse points are processed by the server
Pull pci fix from Bjorn Helgaas:
- Run quirk_huawei_pcie_sva() before arm_smmu_probe_device(), which
depends on the quirk, to avoid IOMMU initialization failures
(Zhangfei Gao)
* tag 'pci-v6.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Run quirk_huawei_pcie_sva() before arm_smmu_probe_device()
The function graph infrastructure uses ftrace to hook to functions. It has
a single ftrace_ops to manage all the users of function graph. Each
individual user (tracing, bpf, fprobes, etc) has its own ftrace_ops to
track the functions it will have its callback called from. These
ftrace_ops are "subops" to the main ftrace_ops of the function graph
infrastructure.
Each ftrace_ops has a filter_hash and a notrace_hash that is defined as:
Only trace functions that are in the filter_hash but not in the
notrace_hash.
If the filter_hash is empty, it means to trace all functions.
If the notrace_hash is empty, it means do not disable any function.
The function graph main ftrace_ops needs to be a superset containing all
the functions to be traced by all the subops it has. The algorithm to
perform this merge was incorrect.
When the first subops was added to the main ops, it simply made the main
ops a copy of the subops (same filter_hash and notrace_hash).
When a second ops was added, it joined the new subops filter_hash with the
main ops filter_hash as a union of the two sets. The intersect between the
new subops notrace_hash and the main ops notrace_hash was created as the
new notrace_hash of the main ops.
The issue here is that it would then start tracing functions than no
subops were tracing. For example if you had two subops that had:
subops 1:
filter_hash = '*sched*' # trace all functions with "sched" in it
notrace_hash = '*time*' # except do not trace functions with "time"
subops 2:
filter_hash = '*lock*' # trace all functions with "lock" in it
notrace_hash = '*clock*' # except do not trace functions with "clock"
The intersect of '*time*' functions with '*clock*' functions could be the
empty set. That means the main ops will be tracing all functions with
'*time*' and all "*clock*" in it!
Instead, modify the algorithm to be a bit simpler and correct.
First, when adding a new subops, even if it's the first one, do not add
the notrace_hash if the filter_hash is not empty. Instead, just add the
functions that are in the filter_hash of the subops but not in the
notrace_hash of the subops into the main ops filter_hash. There's no
reason to add anything to the main ops notrace_hash.
The notrace_hash of the main ops should only be non empty iff all subops
filter_hashes are empty (meaning to trace all functions) and all subops
notrace_hashes include the same functions.
That is, the main ops notrace_hash is empty if any subops filter_hash is
non empty.
The main ops notrace_hash only has content in it if all subops
filter_hashes are empty, and the content are only functions that intersect
all the subops notrace_hashes. If any subops notrace_hash is empty, then
so is the main ops notrace_hash.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/20250409152720.216356767@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
quirk_huawei_pcie_sva() sets properties needed by arm_smmu_probe_device(),
but bcb81ac6ae ("iommu: Get DT/ACPI parsing into the proper probe path")
changed the iommu_probe_device() flow so arm_smmu_probe_device() is now
invoked before the quirk, leading to failures like this:
reg-dummy reg-dummy: late IOMMU probe at driver bind, something fishy here!
WARNING: CPU: 0 PID: 1 at drivers/iommu/iommu.c:449 __iommu_probe_device+0x140/0x570
RIP: 0010:__iommu_probe_device+0x140/0x570
The SR-IOV enumeration ordering changes like this:
pci_iov_add_virtfn
pci_device_add
pci_fixup_device(pci_fixup_header) <--
device_add
bus_notify
iommu_bus_notifier
+ iommu_probe_device
+ arm_smmu_probe_device
pci_bus_add_device
pci_fixup_device(pci_fixup_final) <--
device_attach
driver_probe_device
really_probe
pci_dma_configure
acpi_dma_configure_id
- iommu_probe_device
- arm_smmu_probe_device
The non-SR-IOV case is similar in that pci_device_add() is called from
pci_scan_single_device() in the generic enumeration path and
pci_bus_add_device() is called later, after all host bridges have been
enumerated.
Declare quirk_huawei_pcie_sva() as a header fixup to ensure that it happens
before arm_smmu_probe_device().
Fixes: bcb81ac6ae ("iommu: Get DT/ACPI parsing into the proper probe path")
Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/all/SJ1PR11MB61295DE21A1184AEE0786E25B9D22@SJ1PR11MB6129.namprd11.prod.outlook.com/
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
[bhelgaas: commit log, add failure info and reporter]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250317011352.5806-1-zhangfei.gao@linaro.org
Pull spi fixes from Mark Brown:
"A couple of cleanups for the error handling in the Freescale drivers"
* tag 'spi-fix-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl-spi: Remove redundant probe error message
spi: fsl-qspi: Fix double cleanup in probe error path
Pull ata fixes from Damien Le Moal:
- Fix missing error checks during controller probe in the sata_sx4
driver (Wentao)
- Fix missing error checks during controller probe in the pata_pxa
driver (Henry)
* tag 'ata-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: sata_sx4: Add error handling in pdc20621_i2c_read()
ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe()
Pull more block fixes from Jens Axboe:
"Apparently my internal clock was off, or perhaps it was just wishful
thinking, but I sent out block fixes yesterday as my brain assumed it
was Friday. Subsequently, that missed the NVMe fixes that should go
into this weeks release as well. Hence, here's a followup with those,
and another simple fix.
- NVMe pull request via Christoph:
- nvmet fc/fcloop refcounting fixes (Daniel Wagner)
- fix missed namespace/ANA scans (Hannes Reinecke)
- fix a use after free in the new TCP netns support (Kuniyuki
Iwashima)
- fix a NULL instead of false review in multipath (Uday Shankar)
- Use strscpy() for null_blk disk name copy"
* tag 'block-6.15-20250411' of git://git.kernel.dk/linux:
null_blk: Use strscpy() instead of strscpy_pad() in null_add_dev()
nvmet-fc: put ref when assoc->del_work is already scheduled
nvmet-fc: take tgtport reference only once
nvmet-fc: update tgtport ref per assoc
nvmet-fc: inline nvmet_fc_free_hostport
nvmet-fc: inline nvmet_fc_delete_assoc
nvmet-fcloop: add ref counting to lport
nvmet-fcloop: replace kref with refcount
nvmet-fcloop: swap list_add_tail arguments
nvme-tcp: fix use-after-free of netns by kernel TCP socket.
nvme: multipath: fix return value of nvme_available_path
nvme: re-read ANA log page after ns scan completes
nvme: requeue namespace scan on missed AENs
Pull iommu fixes from Joerg Roedel:
- Fix two crashes, one in core code and a NULL-ptr dereference in the
Mediatek IOMMU driver
- Dma_ops cleanup fix for core code
- Two fixes for Intel VT-d driver:
- Fix posted MSI issue when users change cpu affinity
- Remove invalid set_dma_ops() call in the iommu driver
- Warning fix for Tegra IOMMU driver
- Suspend/Resume fix for Exynos IOMMU driver
- Probe failure fix for Renesas IOMMU driver
- Cosmetic fix
* tag 'iommu-fixes-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()
iommu: remove unneeded semicolon
iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group
iommu/exynos: Fix suspend/resume with IDENTITY domain
iommu/ipmmu-vmsa: Register in a sensible order
iommu: Clear iommu-dma ops on cleanup
iommu/vt-d: Remove an unnecessary call set_dma_ops()
iommu/vt-d: Wire up irq_ack() to irq_move_irq() for posted MSIs
iommu: Fix crash in report_iommu_fault()
Pull ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI button driver, add quirks
related to EC wakeups from suspend-to-idle and fix coding mistakes
related to the usage of sizeof() in the PPTT parser code:
Summary:
- Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario
Limonciello)
- Prevent ACPI button from sending spurions KEY_POWER events to user
space in some cases after a recent update (Mario Limonciello)
- Compute the size of a structure instead of the size of a pointer in
two places in the PPTT parser code (Jean-Marc Eurin)"
* tag 'acpi-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI PPTT: Fix coding mistakes in a couple of sizeof() calls
ACPI: EC: Set ec_no_wakeup for Lenovo Go S
ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
Pull s390 updates from Heiko Carstens:
"Note that besides two bug fixes this includes three commits for IBM
z17, which was announced this week.
- Add IBM z17 bits:
- Setup elf_platform for new machine types
- Allow to compile the kernel with z17 optimizations
- Add new performance counters
- Fix mismatch between indicator bits and queue indexes in virtio CCW code
- Fix double free in pmu setup error path"
* tag 's390-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpumf: Fix double free on error in cpumf_pmu_event_init()
s390/cpumf: Update CPU Measurement facility extended counter set support
s390: Allow to compile with z17 optimizations
s390: Add z17 elf platform
s390/virtio_ccw: Don't allocate/assign airqs for non-existing queues
Merge updates of the ACPI EC and button drivers for 6.15-rc2:
- Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario
Limonciello).
- Prevent ACPI button from sending spurions KEY_POWER events to user
space in some cases after a recent update (Mario Limonciello).
* acpi-ec:
ACPI: EC: Set ec_no_wakeup for Lenovo Go S
* acpi-button:
ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
blk_mq_alloc_disk() already zero-initializes the destination buffer,
making strscpy() sufficient for safely copying the disk's name. The
additional NUL-padding performed by strscpy_pad() is unnecessary.
If the destination buffer has a fixed length, strscpy() automatically
determines its size using sizeof() when the argument is omitted. This
makes the explicit size argument unnecessary.
The source string is also NUL-terminated and meets the __must_be_cstr()
requirement of strscpy().
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250410154727.883207-1-thorsten.blum@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Two WARNINGs are observed when SMMU driver rolls back upon failure:
arm-smmu-v3.9.auto: Failed to register iommu
arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22
------------[ cut here ]------------
WARNING: CPU: 5 PID: 1 at kernel/dma/mapping.c:74 dmam_free_coherent+0xc0/0xd8
Call trace:
dmam_free_coherent+0xc0/0xd8 (P)
tegra241_vintf_free_lvcmdq+0x74/0x188
tegra241_cmdqv_remove_vintf+0x60/0x148
tegra241_cmdqv_remove+0x48/0xc8
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
------------[ cut here ]------------
128 pages are still in use!
WARNING: CPU: 16 PID: 1 at mm/page_alloc.c:6902 free_contig_range+0x18c/0x1c8
Call trace:
free_contig_range+0x18c/0x1c8 (P)
cma_release+0x154/0x2f0
dma_free_contiguous+0x38/0xa0
dma_direct_free+0x10c/0x248
dma_free_attrs+0x100/0x290
dmam_free_coherent+0x78/0xd8
tegra241_vintf_free_lvcmdq+0x74/0x160
tegra241_cmdqv_remove+0x98/0x198
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
This is because the LVCMDQ queue memory are managed by devres, while that
dmam_free_coherent() is called in the context of devm_action_release().
Jason pointed out that "arm_smmu_impl_probe() has mis-ordered the devres
callbacks if ops->device_remove() is going to be manually freeing things
that probe allocated":
https://lore.kernel.org/linux-iommu/20250407174408.GB1722458@nvidia.com/
In fact, tegra241_cmdqv_init_structures() only allocates memory resources
which means any failure that it generates would be similar to -ENOMEM, so
there is no point in having that "falling back to standard SMMU" routine,
as the standard SMMU would likely fail to allocate memory too.
Remove the unwind part in tegra241_cmdqv_init_structures(), and return a
proper error code to ask SMMU driver to call tegra241_cmdqv_remove() via
impl_ops->device_remove(). Then, drop tegra241_vintf_free_lvcmdq() since
devres will take care of that.
Fixes: 483e0bd888 ("iommu/tegra241-cmdqv: Do not allocate vcmdq until dma_set_mask_and_coherent")
Cc: stable@vger.kernel.org
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250407201908.172225-1-nicolinc@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit bcb81ac6ae ("iommu: Get DT/ACPI parsing into the proper probe
path") changed the sequence of probing the SYSMMU controller devices and
calls to arm_iommu_attach_device(), what results in resuming SYSMMU
controller earlier, when it is still set to IDENTITY mapping. Such change
revealed the bug in IDENTITY handling in the exynos-iommu driver. When
SYSMMU controller is set to IDENTITY mapping, data->domain is NULL, so
adjust checks in suspend & resume callbacks to handle this case
correctly.
Fixes: b3d14960e6 ("iommu/exynos: Implement an IDENTITY domain")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250401202731.2810474-1-m.szyprowski@samsung.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Set the posted MSI irq_chip's irq_ack() hook to irq_move_irq() instead of
a dummy/empty callback so that posted MSIs process pending changes to the
IRQ's SMP affinity. Failure to honor a pending set-affinity results in
userspace being unable to change the effective affinity of the IRQ, as
IRQD_SETAFFINITY_PENDING is never cleared and so irq_set_affinity_locked()
always defers moving the IRQ.
The issue is most easily reproducible by setting /proc/irq/xx/smp_affinity
multiple times in quick succession, as only the first update is likely to
be handled in process context.
Fixes: ed1e48ea43 ("iommu/vt-d: Enable posted mode for device MSIs")
Cc: Robert Lippert <rlippert@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Wentao Yang <wentaoyang@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250321194249.1217961-1-seanjc@google.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The following crash is observed while handling an IOMMU fault with a
recent kernel:
kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
BUG: unable to handle page fault for address: ffff8c708299f700
PGD 19ee01067 P4D 19ee01067 PUD 101c10063 PMD 80000001028001e3
Oops: Oops: 0011 [#1] SMP NOPTI
CPU: 4 UID: 0 PID: 139 Comm: irq/25-AMD-Vi Not tainted 6.15.0-rc1+ #20 PREEMPT(lazy)
Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN50WW 09/27/2024
RIP: 0010:0xffff8c708299f700
Call Trace:
<TASK>
? report_iommu_fault+0x78/0xd3
? amd_iommu_report_page_fault+0x91/0x150
? amd_iommu_int_thread+0x77/0x180
? __pfx_irq_thread_fn+0x10/0x10
? irq_thread_fn+0x23/0x60
? irq_thread+0xf9/0x1e0
? __pfx_irq_thread_dtor+0x10/0x10
? __pfx_irq_thread+0x10/0x10
? kthread+0xfc/0x240
? __pfx_kthread+0x10/0x10
? ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
? ret_from_fork_asm+0x1a/0x30
</TASK>
report_iommu_fault() checks for an installed handler comparing the
corresponding field to NULL. It can (and could before) be called for a
domain with a different cookie type - IOMMU_COOKIE_DMA_IOVA, specifically.
Cookie is represented as a union so we may end up with a garbage value
treated there if this happens for a domain with another cookie type.
Formerly there were two exclusive cookie types in the union.
IOMMU_DOMAIN_SVA has a dedicated iommu_report_device_fault().
Call the fault handler only if the passed domain has a required cookie
type.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 6aa63a4ec9 ("iommu: Sort out domain user data")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250408213342.285955-1-pchelkin@ispras.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull drm fixes from Dave Airlie:
"Weekly fixes, as expected it has a bit more in it than probably usual
for rc2. amdgpu/xe/i915 lead the way with fixes all over for a bunch
of other drivers. Nothing major stands out from what I can see.
tests:
- Clean up struct drm_display_mode in various places
i915:
- Fix scanline offset for LNL+ and BMG+
- Fix GVT unterminated-string-initialization build warning
- Fix DP rate limit when sink doesn't support TPS4
- Handle GDDR + ECC memory type detection
- Fix VRR parameter change check
- Fix fence not released on early probe errors
- Disable render power gating during live selftests
xe:
- Add another BMG PCI ID
- Fix UAFs on migration paths
- Fix shift-out-of-bounds access on TLB invalidation
- Ensure ccs_mode is correctly set on gt reset
- Extend some HW workarounds to Xe3
- Fix PM runtime get/put on sysfs files
- Fix u64 division on 32b
- Fix flickering due to missing L3 invalidations
- Fix missing error code return
amdgpu:
- MES FW version caching fixes
- Only use GTT as a fallback if we already have a backing store
- dma_buf fix
- IP discovery fix
- Replay and PSR with VRR fix
- DC FP fixes
- eDP fixes
- KIQ TLB invalidate fix
- Enable dmem groups support
- Allow pinning VRAM dma bufs if imports can do P2P
- Workload profile fixes
- Prevent possible division by 0 in fan handling
amdkfd:
- Queue reset fixes
imagination:
- Fix overflow
- Fix use-after-free
ivpu:
- Fix suspend/resume
nouveau:
- Do not deref dangling pointer
rockchip:
- Set DP/HDMI registers correctly
udmabuf:
- Fix overflow
virtgpu:
- Set reservation lock on dma-buf import
- Fix error handling in prepare_fb"
* tag 'drm-fixes-2025-04-11-1' of https://gitlab.freedesktop.org/drm/kernel: (58 commits)
drm/rockchip: dw_hdmi_qp: Fix io init for dw_hdmi_qp_rockchip_resume
drm/rockchip: vop2: Fix interface enable/mux setting of DP1 on rk3588
drm/amdgpu/mes12: optimize MES pipe FW version fetching
drm/amd/pm/smu11: Prevent division by zero
drm/amdgpu: cancel gfx idle work in device suspend for s0ix
drm/amd/display: pause the workload setting in dm
drm/amdgpu/pm/swsmu: implement pause workload profile
drm/amdgpu/pm: add workload profile pause helper
drm/i915/huc: Fix fence not released on early probe errors
drm/i915/vrr: Add vrr.vsync_{start, end} in vrr_params_changed
drm/tests: probe-helper: Fix drm_display_mode memory leak
drm/tests: modes: Fix drm_display_mode memory leak
drm/tests: modes: Fix drm_display_mode memory leak
drm/tests: cmdline: Fix drm_display_mode memory leak
drm/tests: modeset: Fix drm_display_mode memory leak
drm/tests: modeset: Fix drm_display_mode memory leak
drm/tests: helpers: Create kunit helper to destroy a drm_display_mode
drm/xe: Restore EIO errno return when GuC PC start fails
drm/xe: Invalidate L3 read-only cachelines for geometry streams too
drm/xe: avoid plain 64-bit division
...
Pull bcachefs fixes from Kent Overstreet:
"Mostly minor fixes.
Eric Biggers' crypto API conversion is included because of long
standing sporadic crashes - mostly, but not entirely syzbot - in the
crypto API code when calling poly1305, which have been nigh impossible
to reproduce and debug.
His rework deletes the code where we've seen the crashes, so either
it'll be a fix or we'll end up with backtraces we can debug. (Thanks
Eric!)"
* tag 'bcachefs-2025-04-10' of git://evilpiepirate.org/bcachefs:
bcachefs: Use sort_nonatomic() instead of sort()
bcachefs: Remove unnecessary softdep on xxhash
bcachefs: use library APIs for ChaCha20 and Poly1305
bcachefs: Fix duplicate "ro,read_only" in opts at startup
bcachefs: Fix UAF in bchfs_read()
bcachefs: Use cpu_to_le16 for dirent lengths
bcachefs: Fix type for parameter in journal_advance_devs_to_next_bucket
bcachefs: Fix escape sequence in prt_printf
Driver Changes:
- Add another BMG PCI ID
- Fix UAFs on migration paths
- Fix shift-out-of-bounds access on TLB invalidation
- Ensure ccs_mode is correctly set on gt reset
- Extend some HW workarounds to Xe3
- Fix PM runtime get/put on sysfs files
- Fix u64 division on 32b
- Fix flickering due to missing L3 invalidations
- Fix missing error code return
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/unq5j26aejbrjz5nuvmdtcgupyix5bacpoahod4bdohlvwrney@kekimsi5ossx
Pull misc irqchip fixes from Ingo Molnar:
- Fix NULL pointer dereference crashes due to missing .chip_flags setup
in the sg2042-msi and irq-bcm2712-mip irqchip drivers
- Remove the davinci aintc irqchip driver's leftover header too
* tag 'irq-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-bcm2712-mip: Set EOI/ACK flags in msi_parent_ops
irqchip/sg2042-msi: Add missing chip flags
irqchip/davinci: Remove leftover header
Pull misc timer fixes from Ingo Molnar:
- Fix missing ACCESS_PRIVATE() that triggered a Sparse warning
- Fix lockdep false positive in tick_freeze() on CONFIG_PREEMPT_RT=y
- Avoid <vdso/unaligned.h> macro's variable shadowing to address build
warning that triggers under W=2 builds
* tag 'timers-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso: Address variable shadowing in macros
timekeeping: Add a lockdep override in tick_freeze()
hrtimer: Add missing ACCESS_PRIVATE() for hrtimer::function
Pull misc x86 fixes from Ingo Molnar:
- Fix CPU topology related regression that limited Xen PV guests to a
single CPU
- Fix ancient e820__register_nosave_regions() bugs that were causing
problems with kexec's artificial memory maps
- Fix an S4 hibernation crash caused by two missing ENDBR's that were
mistakenly removed in a recent commit
- Fix a resctrl serialization bug
- Fix early_printk documentation and comments
- Fix RSB bugs, combined with preparatory updates to better match the
code to vendor recommendations.
- Add RSB mitigation document
- Fix/update documentation
- Fix the erratum_1386_microcode[] table to be NULL terminated
* tag 'x86-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ibt: Fix hibernate
x86/cpu: Avoid running off the end of an AMD erratum table
Documentation/x86: Zap the subsection letters
Documentation/x86: Update the naming of CPU features for /proc/cpuinfo
x86/bugs: Add RSB mitigation document
x86/bugs: Don't fill RSB on context switch with eIBRS
x86/bugs: Don't fill RSB on VMEXIT with eIBRS+retpoline
x86/bugs: Fix RSB clearing in indirect_branch_prediction_barrier()
x86/bugs: Use SBPB in write_ibpb() if applicable
x86/bugs: Rename entry_ibpb() to write_ibpb()
x86/early_printk: Use 'mmio32' for consistency, fix comments
x86/resctrl: Fix rdtgroup_mkdir()'s unlocked use of kernfs_node::name
x86/e820: Fix handling of subpage regions when calculating nosave ranges in e820__register_nosave_regions()
x86/acpi: Don't limit CPUs to 1 for Xen PV guests due to disabled ACPI
Pull misc perf events fixes from Ingo Molnar:
- Fix __free_event() corner case splat
- Fix false-positive uprobes related lockdep splat on
CONFIG_PREEMPT_RT=y kernels
- Fix a complicated perf sigtrap race that may result in hangs
* tag 'perf-urgent-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix hang while freeing sigtrap event
uprobes: Avoid false-positive lockdep splat on CONFIG_PREEMPT_RT=y in the ri_timer() uprobe timer callback, use raw_write_seqcount_*()
perf/core: Fix WARN_ON(!ctx) in __free_event() for partial init
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink()
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr()
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority"
* tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ethtool: cmis_cdb: Fix incorrect read / write length extension
selftests: netfilter: add test case for recent mismatch bug
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
net: ppp: Add bound checking for skb data on ppp_sync_txmung
net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod.
ipv6: Align behavior across nexthops during path selection
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend()
selftests/tc-testing: sfq: check that a derived limit of 1 is rejected
net_sched: sch_sfq: move the limit validation
net_sched: sch_sfq: use a temporary work area for validating configuration
net: libwx: handle page_pool_dev_alloc_pages error
selftests: mptcp: validate MPJoin HMacFailure counters
mptcp: only inc MPJoinAckHMacFailure for HMAC failures
rtnetlink: Fix bad unlock balance in do_setlink().
net: ethtool: Don't call .cleanup_data when prepare_data fails
tc: Ensure we have enough buffer space when sending filter netlink notifications
net: libwx: Fix the wrong Rx descriptor field
octeontx2-pf: qos: fix VF root node parent queue index
selftests: tls: check that disconnect does nothing
...
Pull NVMe updates from Christoph:
"nvme updates for Linux 6.15
- nvmet fc/fcloop refcounting fixes (Daniel Wagner)
- fix missed namespace/ANA scans (Hannes Reinecke)
- fix a use after free in the new TCP netns support (Kuniyuki Iwashima)
- fix a NULL instead of false review in multipath (Uday Shankar)"
* tag 'nvme-6.15-2025-04-10' of git://git.infradead.org/nvme:
nvmet-fc: put ref when assoc->del_work is already scheduled
nvmet-fc: take tgtport reference only once
nvmet-fc: update tgtport ref per assoc
nvmet-fc: inline nvmet_fc_free_hostport
nvmet-fc: inline nvmet_fc_delete_assoc
nvmet-fcloop: add ref counting to lport
nvmet-fcloop: replace kref with refcount
nvmet-fcloop: swap list_add_tail arguments
nvme-tcp: fix use-after-free of netns by kernel TCP socket.
nvme: multipath: fix return value of nvme_available_path
nvme: re-read ANA log page after ns scan completes
nvme: requeue namespace scan on missed AENs
A file handle that userspace provides to open_by_handle_at() can
legitimately contain an outdated inode number that has since been reused
for another purpose - that's why the file handle also contains a generation
number.
But if the inode number has been reused for an ea_inode, check_igot_inode()
will notice, __ext4_iget() will go through ext4_error_inode(), and if the
inode was newly created, it will also be marked as bad by iget_failed().
This all happens before the point where the inode generation is checked.
ext4_error_inode() is supposed to only be used on filesystem corruption; it
should not be used when userspace just got unlucky with a stale file
handle. So when this happens, let __ext4_iget() just return an error.
Fixes: b3e6bcb945 ("ext4: add EA_INODE checking to ext4_iget()")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241129-ext4-ignore-ea-fhandle-v1-1-e532c0d1cee0@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull xen fixes from Juergen Gross:
- A simple fix adding the module description of the Xenbus frontend
module
- A fix correcting the xen-acpi-processor Kconfig dependency for PVH
Dom0 support
- A fix for the Xen balloon driver when running as Xen Dom0 in PVH mode
- A fix for PVH Dom0 in order to avoid problems with CPU idle and
frequency drivers conflicting with Xen
* tag 'for-linus-6.15a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: disable CPU idle and frequency drivers for PVH dom0
x86/xen: fix balloon target initialization for PVH dom0
xen: Change xen-acpi-processor dom0 dependency
xenbus: add module description
Pull block fixes from Jens Axboe:
- Add a missing ublk selftest script, from test additions added last
week
- Two fixes for ublk error recovery and reissue
- Cleanup of ublk argument passing
* tag 'block-6.15-20250410' of git://git.kernel.dk/linux:
ublk: pass ublksrv_ctrl_cmd * instead of io_uring_cmd *
ublk: don't fail request for recovery & reissue in case of ubq->canceling
ublk: fix handling recovery & reissue in ublk_abort_queue()
selftests: ublk: fix test_stripe_04
Pull io_uring fixes from Jens Axboe:
- Reject zero sized legacy provided buffers upfront. No ill side
effects from this one, only really done to shut up a silly syzbot
test case.
- Fix for a regression in tag posting for registered files or buffers,
where the tag would be posted even when the registration failed.
- two minor zcrx cleanups for code added this merge window.
* tag 'io_uring-6.15-20250410' of git://git.kernel.dk/linux:
io_uring/kbuf: reject zero sized provided buffers
io_uring/zcrx: separate niov number from pages
io_uring/zcrx: put refill data into separate cache line
io_uring: don't post tag CQEs on file/buffer registration failure
Pull gpio fixes from Bartosz Golaszewski:
- fix resource handling in gpio-tegra186
- fix wakeup source leaks in gpio-mpc8xxx and gpio-zynq
- fix minor issues with some GPIO OF quirks
- deprecate GPIOD_FLAGS_BIT_NONEXCLUSIVE and devm_gpiod_unhinge()
symbols and add a TODO task to track replacing them with a better
solution
* tag 'gpio-fixes-for-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: of: Move Atmel HSMCI quirk up out of the regulator comment
gpiolib: of: Fix the choice for Ingenic NAND quirk
gpio: zynq: Fix wakeup source leaks on device unbind
gpio: mpc8xxx: Fix wakeup source leaks on device unbind
gpio: TODO: track the removal of regulator-related workarounds
MAINTAINERS: add more keywords for the GPIO subsystem entry
gpio: deprecate devm_gpiod_unhinge()
gpio: deprecate the GPIOD_FLAGS_BIT_NONEXCLUSIVE flag
gpio: tegra186: fix resource handling in ACPI probe path
Pull mtd fixes from Miquel Raynal:
"Two important fixes: the build of the SPI NAND layer with old GCC
versions as well as the fix of the Qpic Makefile which was wrong in
the first place.
There are also two smaller fixes about a missing error and status
check"
* tag 'mtd/fixes-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spinand: Fix build with gcc < 7.5
mtd: rawnand: Add status chack in r852_ready()
mtd: inftlcore: Add error check for inftl_read_oob()
mtd: nand: Drop explicit test for built-in CONFIG_SPI_QPIC_SNAND
The 'read_write_len_ext' field in 'struct ethtool_cmis_cdb_cmd_args'
stores the maximum number of bytes that can be read from or written to
the Local Payload (LPL) page in a single multi-byte access.
Cited commit started overwriting this field with the maximum number of
bytes that can be read from or written to the Extended Payload (LPL)
pages in a single multi-byte access. Transceiver modules that support
auto paging can advertise a number larger than 255 which is problematic
as 'read_write_len_ext' is a 'u8', resulting in the number getting
truncated and firmware flashing failing [1].
Fix by ignoring the maximum EPL access size as the kernel does not
currently support auto paging (even if the transceiver module does) and
will not try to read / write more than 128 bytes at once.
[1]
Transceiver module firmware flashing started for device enp177s0np0
Transceiver module firmware flashing in progress for device enp177s0np0
Progress: 0%
Transceiver module firmware flashing encountered an error for device enp177s0np0
Status message: Write FW block EPL command failed, LPL length is longer
than CDB read write length extension allows.
Fixes: 9a3b0d078b ("net: ethtool: Add support for writing firmware blocks using EPL payload")
Reported-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Closes: https://lore.kernel.org/netdev/20250402183123.321036-3-michael.chan@broadcom.com/
Tested-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250409112440.365672-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 40369bfe71 ("spi: fsl-qspi: use devm function instead of driver
remove") introduced managed cleanup via fsl_qspi_cleanup(), but
incorrectly retain manual cleanup in two scenarios:
- On devm_add_action_or_reset() failure, the function automatically call
fsl_qspi_cleanup(). However, the current code still jumps to
err_destroy_mutex, repeating cleanup.
- After the fsl_qspi_cleanup() action is added successfully, there is no
need to manually perform the cleanup in the subsequent error path.
However, the current code still jumps to err_destroy_mutex on spi
controller failure, repeating cleanup.
Skip redundant manual cleanup calls to fix these issues.
Cc: stable@vger.kernel.org
Fixes: 40369bfe71 ("spi: fsl-qspi: use devm function instead of driver remove")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20250410-spi-v1-1-56e867cc19cf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains a Netfilter fix and improved test coverage:
1) Fix AVX2 matching in nft_pipapo, from Florian Westphal.
2) Extend existing test to improve coverage for the aforementioned bug,
also from Florian.
netfilter pull request 25-04-10
* tag 'nf-25-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: add test case for recent mismatch bug
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
====================
Link: https://patch.msgid.link/20250410103647.1030244-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Without 'nft_set_pipapo: fix incorrect avx2 match of 5th field octet"
this fails:
TEST: reported issues
Add two elements, flush, re-add 1s [ OK ]
net,mac with reload 0s [ OK ]
net,port,proto 3s [ OK ]
avx2 false match 0s [FAIL]
False match for fe80:dead:01fe:0a02:0b03:6007:8009:a001
Other tests do not detect the kernel bug as they only alter parts in
the /64 netmask.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Given a set element like:
icmpv6 . dead:beef:00ff::1
The value of 'ff' is irrelevant, any address will be matched
as long as the other octets are the same.
This is because of too-early register clobbering:
ymm7 is reloaded with new packet data (pkt[9]) but it still holds data
of an earlier load that wasn't processed yet.
The existing tests in nft_concat_range.sh selftests do exercise this code
path, but do not trigger incorrect matching due to the network prefix
limitation.
Fixes: 7400b06396 ("nft_set_pipapo: Introduce AVX2-based lookup implementation")
Reported-by: sontu mazumdar <sontu21@gmail.com>
Closes: https://lore.kernel.org/netfilter/CANgxkqwnMH7fXra+VUfODT-8+qFLgskq3set1cAzqqJaV4iEZg@mail.gmail.com/T/#t
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Compiling the kernel with gcc12.3 W=2 results in shadowing warnings:
warning: declaration of '__pptr' shadows a previous local [-Wshadow]
const struct { type x; } __packed *__pptr = (typeof(__pptr))(ptr);
note: in definition of macro '__put_unaligned_t'
__pptr->x = (val);
note: in expansion of macro '__get_unaligned_t'
__put_unaligned_t(type, __get_unaligned_t(type, src), dst);
__get_unaligned_t() and __put_unaligned_t() use a local variable named
'__pptr', which can lead to variable shadowing when these macros are used in
the same scope. This results in a -Wshadow warning during compilation.
To address this issue, rename the local variables within the macros to
ensure uniqueness.
Signed-off-by: Peng Jiang <jiang.peng9@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250324191230477zpGtgIRSH4mEHdtxGtgx9@zte.com.cn
amd-drm-fixes-6.15-2025-04-09:
amdgpu:
- MES FW version caching fixes
- Only use GTT as a fallback if we already have a backing store
- dma_buf fix
- IP discovery fix
- Replay and PSR with VRR fix
- DC FP fixes
- eDP fixes
- KIQ TLB invalidate fix
- Enable dmem groups support
- Allow pinning VRAM dma bufs if imports can do P2P
- Workload profile fixes
- Prevent possible division by 0 in fan handling
amdkfd:
- Queue reset fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250409165238.1180153-1-alexander.deucher@amd.com
Two new file system attributes were recently added. See MS-FSCC 2.5.1:
FILE_SUPPORTS_POSIX_UNLINK_RENAME and
FILE_RETURNS_CLEANUP_RESULT_INFO
Update the missing defines for ksmbd and cifs.ko
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
drm/i915 fixes for v6.15-rc2:
- Fix scanline offset for LNL+ and BMG+
- Fix GVT unterminated-string-initialization build warning
- Fix DP rate limit when sink doesn't support TPS4
- Handle GDDR + ECC memory type detection
- Fix VRR parameter change check
- Fix fence not released on early probe errors
- Disable render power gating during live selftests
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/87lds9wlpq.fsf@intel.com
Verify that a classic BPF linux socket filter correctly matches
packet contents. Including when accessing contents in an
skb_frag.
1. Open a SOCK_RAW socket with a classic BPF filter on UDP dport 8000.
2. Open a tap device with IFF_NAPI_FRAGS to inject skbs with frags.
3. Send a packet for which the UDP header is in frag[0].
4. Receive this packet to demonstrate that the socket accepted it.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20250408132833.195491-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Classic BPF socket filters with SKB_NET_OFF and SKB_LL_OFF fail to
read when these offsets extend into frags.
This has been observed with iwlwifi and reproduced with tun with
IFF_NAPI_FRAGS. The below straightforward socket filter on UDP port,
applied to a RAW socket, will silently miss matching packets.
const int offset_proto = offsetof(struct ip6_hdr, ip6_nxt);
const int offset_dport = sizeof(struct ip6_hdr) + offsetof(struct udphdr, dest);
struct sock_filter filter_code[] = {
BPF_STMT(BPF_LD + BPF_B + BPF_ABS, SKF_AD_OFF + SKF_AD_PKTTYPE),
BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, PACKET_HOST, 0, 4),
BPF_STMT(BPF_LD + BPF_B + BPF_ABS, SKF_NET_OFF + offset_proto),
BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, IPPROTO_UDP, 0, 2),
BPF_STMT(BPF_LD + BPF_H + BPF_ABS, SKF_NET_OFF + offset_dport),
This is unexpected behavior. Socket filter programs should be
consistent regardless of environment. Silent misses are
particularly concerning as hard to detect.
Use skb_copy_bits for offsets outside linear, same as done for
non-SKF_(LL|NET) offsets.
Offset is always positive after subtracting the reference threshold
SKB_(LL|NET)_OFF, so is always >= skb_(mac|network)_offset. The sum of
the two is an offset against skb->data, and may be negative, but it
cannot point before skb->head, as skb_(mac|network)_offset would too.
This appears to go back to when frag support was introduced to
sk_run_filter in linux-2.4.4, before the introduction of git.
The amount of code change and 8/16/32 bit duplication are unfortunate.
But any attempt I made to be smarter saved very few LoC while
complicating the code.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/netdev/20250122200402.3461154-1-maze@google.com/
Link: https://elixir.bootlin.com/linux/2.4.4/source/net/core/filter.c#L244
Reported-by: Matt Moeller <moeller.matt@gmail.com>
Co-developed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20250408132833.195491-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When I ran the repro [0] and waited a few seconds, I observed two
LOCKDEP splats: a warning immediately followed by a null-ptr-deref. [1]
Reproduction Steps:
1) Mount CIFS
2) Add an iptables rule to drop incoming FIN packets for CIFS
3) Unmount CIFS
4) Unload the CIFS module
5) Remove the iptables rule
At step 3), the CIFS module calls sock_release() for the underlying
TCP socket, and it returns quickly. However, the socket remains in
FIN_WAIT_1 because incoming FIN packets are dropped.
At this point, the module's refcnt is 0 while the socket is still
alive, so the following rmmod command succeeds.
# ss -tan
State Recv-Q Send-Q Local Address:Port Peer Address:Port
FIN-WAIT-1 0 477 10.0.2.15:51062 10.0.0.137:445
# lsmod | grep cifs
cifs 1159168 0
This highlights a discrepancy between the lifetime of the CIFS module
and the underlying TCP socket. Even after CIFS calls sock_release()
and it returns, the TCP socket does not die immediately in order to
close the connection gracefully.
While this is generally fine, it causes an issue with LOCKDEP because
CIFS assigns a different lock class to the TCP socket's sk->sk_lock
using sock_lock_init_class_and_name().
Once an incoming packet is processed for the socket or a timer fires,
sk->sk_lock is acquired.
Then, LOCKDEP checks the lock context in check_wait_context(), where
hlock_class() is called to retrieve the lock class. However, since
the module has already been unloaded, hlock_class() logs a warning
and returns NULL, triggering the null-ptr-deref.
If LOCKDEP is enabled, we must ensure that a module calling
sock_lock_init_class_and_name() (CIFS, NFS, etc) cannot be unloaded
while such a socket is still alive to prevent this issue.
Let's hold the module reference in sock_lock_init_class_and_name()
and release it when the socket is freed in sk_prot_free().
Note that sock_lock_init() clears sk->sk_owner for svc_create_socket()
that calls sock_lock_init_class_and_name() for a listening socket,
which clones a socket by sk_clone_lock() without GFP_ZERO.
[0]:
CIFS_SERVER="10.0.0.137"
CIFS_PATH="//${CIFS_SERVER}/Users/Administrator/Desktop/CIFS_TEST"
DEV="enp0s3"
CRED="/root/WindowsCredential.txt"
MNT=$(mktemp -d /tmp/XXXXXX)
mount -t cifs ${CIFS_PATH} ${MNT} -o vers=3.0,credentials=${CRED},cache=none,echo_interval=1
iptables -A INPUT -s ${CIFS_SERVER} -j DROP
for i in $(seq 10);
do
umount ${MNT}
rmmod cifs
sleep 1
done
rm -r ${MNT}
iptables -D INPUT -s ${CIFS_SERVER} -j DROP
[1]:
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 10 PID: 0 at kernel/locking/lockdep.c:234 hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223)
Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Not tainted 6.14.0 #36
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223)
...
Call Trace:
<IRQ>
__lock_acquire (kernel/locking/lockdep.c:4853 kernel/locking/lockdep.c:5178)
lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816)
_raw_spin_lock_nested (kernel/locking/spinlock.c:379)
tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350)
...
BUG: kernel NULL pointer dereference, address: 00000000000000c4
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Tainted: G W 6.14.0 #36
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__lock_acquire (kernel/locking/lockdep.c:4852 kernel/locking/lockdep.c:5178)
Code: 15 41 09 c7 41 8b 44 24 20 25 ff 1f 00 00 41 09 c7 8b 84 24 a0 00 00 00 45 89 7c 24 20 41 89 44 24 24 e8 e1 bc ff ff 4c 89 e7 <44> 0f b6 b8 c4 00 00 00 e8 d1 bc ff ff 0f b6 80 c5 00 00 00 88 44
RSP: 0018:ffa0000000468a10 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ff1100010091cc38 RCX: 0000000000000027
RDX: ff1100081f09ca48 RSI: 0000000000000001 RDI: ff1100010091cc88
RBP: ff1100010091c200 R08: ff1100083fe6e228 R09: 00000000ffffbfff
R10: ff1100081eca0000 R11: ff1100083fe10dc0 R12: ff1100010091cc88
R13: 0000000000000001 R14: 0000000000000000 R15: 00000000000424b1
FS: 0000000000000000(0000) GS:ff1100081f080000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c4 CR3: 0000000002c4a003 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816)
_raw_spin_lock_nested (kernel/locking/spinlock.c:379)
tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))
ip_local_deliver_finish (./include/linux/rcupdate.h:878 net/ipv4/ip_input.c:234)
ip_sublist_rcv_finish (net/ipv4/ip_input.c:576)
ip_list_rcv_finish (net/ipv4/ip_input.c:628)
ip_list_rcv (net/ipv4/ip_input.c:670)
__netif_receive_skb_list_core (net/core/dev.c:5939 net/core/dev.c:5986)
netif_receive_skb_list_internal (net/core/dev.c:6040 net/core/dev.c:6129)
napi_complete_done (./include/linux/list.h:37 ./include/net/gro.h:519 ./include/net/gro.h:514 net/core/dev.c:6496)
e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3815)
__napi_poll.constprop.0 (net/core/dev.c:7191)
net_rx_action (net/core/dev.c:7262 net/core/dev.c:7382)
handle_softirqs (kernel/softirq.c:561)
__irq_exit_rcu (kernel/softirq.c:596 kernel/softirq.c:435 kernel/softirq.c:662)
irq_exit_rcu (kernel/softirq.c:680)
common_interrupt (arch/x86/kernel/irq.c:280 (discriminator 14))
</IRQ>
<TASK>
asm_common_interrupt (./arch/x86/include/asm/idtentry.h:693)
RIP: 0010:default_idle (./arch/x86/include/asm/irqflags.h:37 ./arch/x86/include/asm/irqflags.h:92 arch/x86/kernel/process.c:744)
Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d c3 2b 15 00 fb f4 <fa> c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90
RSP: 0018:ffa00000000ffee8 EFLAGS: 00000202
RAX: 000000000000640b RBX: ff1100010091c200 RCX: 0000000000061aa4
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff812f30c5
RBP: 000000000000000a R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325)
default_idle_call (./include/linux/cpuidle.h:143 kernel/sched/idle.c:118)
do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325)
cpu_startup_entry (kernel/sched/idle.c:422 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:315)
common_startup_64 (arch/x86/kernel/head_64.S:421)
</TASK>
Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CR2: 00000000000000c4
Fixes: ed07536ed6 ("[PATCH] lockdep: annotate nfs/nfsd in-kernel sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250407163313.22682-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A nexthop is only chosen when the calculated multipath hash falls in the
nexthop's hash region (i.e., the hash is smaller than the nexthop's hash
threshold) and when the nexthop is assigned a non-negative score by
rt6_score_route().
Commit 4d0ab3a688 ("ipv6: Start path selection from the first
nexthop") introduced an unintentional difference between the first
nexthop and the rest when the score is negative.
When the first nexthop matches, but has a negative score, the code will
currently evaluate subsequent nexthops until one is found with a
non-negative score. On the other hand, when a different nexthop matches,
but has a negative score, the code will fallback to the nexthop with
which the selection started ('match').
Align the behavior across all nexthops and fallback to 'match' when the
first nexthop matches, but has a negative score.
Fixes: 3d709f69a3 ("ipv6: Use hash-threshold instead of modulo-N")
Fixes: 4d0ab3a688 ("ipv6: Start path selection from the first nexthop")
Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Closes: https://lore.kernel.org/netdev/67efef607bc41_1ddca82948c@willemb.c.googlers.com.notmuch/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250408084316.243559-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DSA has 2 kinds of drivers:
1. Those who call dsa_switch_suspend() and dsa_switch_resume() from
their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz
2. Those who don't: all others. The above methods should be optional.
For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(),
and dsa_switch_resume() calls dsa_user_resume() -> phylink_start().
These seem good candidates for setting mac_managed_pm = true because
that is essentially its definition [1], but that does not seem to be the
biggest problem for now, and is not what this change focuses on.
Talking strictly about the 2nd category of DSA drivers here (which
do not have MAC managed PM, meaning that for their attached PHYs,
mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),
I have noticed that the following warning from mdio_bus_phy_resume() is
triggered:
WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
phydev->state != PHY_UP);
because the PHY state machine is running.
It's running as a result of a previous dsa_user_open() -> ... ->
phylink_start() -> phy_start() having been initiated by the user.
The previous mdio_bus_phy_suspend() was supposed to have called
phy_stop_machine(), but it didn't. So this is why the PHY is in state
PHY_NOLINK by the time mdio_bus_phy_resume() runs.
mdio_bus_phy_suspend() did not call phy_stop_machine() because for
phylink, the phydev->adjust_link function pointer is NULL. This seems a
technicality introduced by commit fddd91016d ("phylib: fix PAL state
machine restart on resume"). That commit was written before phylink
existed, and was intended to avoid crashing with consumer drivers which
don't use the PHY state machine - phylink always does, when using a PHY.
But phylink itself has historically not been developed with
suspend/resume in mind, and apparently not tested too much in that
scenario, allowing this bug to exist unnoticed for so long. Plus, prior
to the WARN_ON(), it would have likely been invisible.
This issue is not in fact restricted to type 2 DSA drivers (according to
the above ad-hoc classification), but can be extrapolated to any MAC
driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where
the issue was reported. Assuming mac_managed_pm is set correctly, a
quick search indicates the following other drivers might be affected:
$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm
drivers/net/ethernet/atheros/ag71xx.c
drivers/net/ethernet/microchip/sparx5/sparx5_main.c
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/freescale/ucc_geth.c
drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
drivers/net/ethernet/marvell/mvneta.c
drivers/net/ethernet/marvell/prestera/prestera_main.c
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/altera/altera_tse_main.c
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
drivers/net/ethernet/tehuti/tn40_phy.c
drivers/net/ethernet/mscc/ocelot_net.c
Make the existing conditions dependent on the PHY device having a
phydev->phy_link_change() implementation equal to the default
phy_link_change() provided by phylib. Otherwise, we implicitly know that
the phydev has the phylink-provided phylink_phy_change() callback, and
when phylink is used, the PHY state machine always needs to be stopped/
started on the suspend/resume path. The code is structured as such that
if phydev->phy_link_change() is absent, it is a matter of time until the
kernel will crash - no need to further complicate the test.
Thus, for the situation where the PM is not managed by the MAC, we will
make the MDIO bus PM ops treat identically the phylink-controlled PHYs
with the phylib-controlled PHYs where an adjust_link() callback is
supplied. In both cases, the MDIO bus PM ops should stop and restart the
PHY state machine.
[1] https://lore.kernel.org/netdev/Z-1tiW9zjcoFkhwc@shell.armlinux.org.uk/
Fixes: 744d23c71a ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Reported-by: Wei Fang <wei.fang@nxp.com>
Tested-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250407094042.2155633-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In an upcoming change, mdio_bus_phy_may_suspend() will need to
distinguish a phylib-based PHY client from a phylink PHY client.
For that, it will need to compare the phydev->phy_link_change() function
pointer with the eponymous phy_link_change() provided by phylib.
To avoid forward function declarations, the default PHY link state
change method should be moved upwards. There is no functional change
associated with this patch, it is only to reduce the noise from a real
bug fix.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250407093900.2155112-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull kselftest fixes from Shuah Khan:
- Fixes tpm2, futex, and mincore tests
- Create a dedicated .gitignore for tpm2 tests
* tag 'linux_kselftest-fixes-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/mincore: Allow read-ahead pages to reach the end of the file
selftests/futex: futex_waitv wouldblock test should fail
selftests: tpm2: test_smoke: use POSIX-conformant expression operator
selftests: tpm2: create a dedicated .gitignore
When reparse point in SMB1 query_path_info() callback was detected then
query also for EA $LXDEV. In this EA are stored device major and minor
numbers used by WSL CHR and BLK reparse points. Without major and minor
numbers, stat() syscall does not work for char and block devices.
Similar code is already in SMB2+ query_path_info() callback function.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Parsing reparse point buffer is generic for all SMB versions and is already
implemented by global function parse_reparse_point().
Getting reparse point buffer from the SMB response is SMB version specific,
so introduce for it a new callback get_reparse_point_buffer.
This functionality split is needed for followup change - getting reparse
point buffer without parsing it.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Like previous changes for file inode.c, handle directory name surrogate
reparse points generally also in reparse.c.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
IO_REPARSE_TAG_MOUNT_POINT is just a specific case of directory Name
Surrogate reparse point. As reparse_info_to_fattr() already handles all
directory Name Surrogate reparse point (done by the previous change),
there is no need to have explicit case for IO_REPARSE_TAG_MOUNT_POINT.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Todd reported, and Len confirmed, that commit 582077c940 ("x86/cfi:
Clean up linkage") broke S4 hiberate on a fair number of machines.
Turns out these machines trip #CP when trying to restore the image.
As it happens, the commit in question removes two ENDBR instructions
in the hibernate code, and clearly got it wrong.
Notably restore_image() does an indirect jump to
relocated_restore_code(), which is a relocated copy of
core_restore_code().
In turn, core_restore_code(), will at the end do an indirect jump to
restore_jump_address (r8), which is pointing at a relocated
restore_registers().
So both sites do indeed need to be ENDBR.
Fixes: 582077c940 ("x86/cfi: Clean up linkage")
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Tested-by: Len Brown <len.brown@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219998
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219998
Like in UNICODE mode, SMB1 Session Setup Kerberos Request contains oslm and
domain strings.
Extract common code into ascii_oslm_strings() and ascii_domain_string()
functions (similar to unicode variants) and use these functions in
non-UNICODE code path in sess_auth_kerberos().
Decision if non-UNICODE or UNICODE mode is used is based on the
SMBFLG2_UNICODE flag in Flags2 packed field, and not based on the
capabilities of server. Fix this check too.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The following causes a vsnprintf fault:
# echo 's:wake_lat char[] wakee; u64 delta;' >> /sys/kernel/tracing/dynamic_events
# echo 'hist:keys=pid:ts=common_timestamp.usecs if !(common_flags & 0x18)' > /sys/kernel/tracing/events/sched/sched_waking/trigger
# echo 'hist:keys=next_pid:delta=common_timestamp.usecs-$ts:onmatch(sched.sched_waking).trace(wake_lat,next_comm,$delta)' > /sys/kernel/tracing/events/sched/sched_switch/trigger
Because the synthetic event's "wakee" field is created as a dynamic string
(even though the string copied is not). The print format to print the
dynamic string changed from "%*s" to "%s" because another location
(__set_synth_event_print_fmt()) exported this to user space, and user
space did not need that. But it is still used in print_synth_event(), and
the output looks like:
<idle>-0 [001] d..5. 193.428167: wake_lat: wakee=(efault)sshd-sessiondelta=155
sshd-session-879 [001] d..5. 193.811080: wake_lat: wakee=(efault)kworker/u34:5delta=58
<idle>-0 [002] d..5. 193.811198: wake_lat: wakee=(efault)bashdelta=91
bash-880 [002] d..5. 193.811371: wake_lat: wakee=(efault)kworker/u35:2delta=21
<idle>-0 [001] d..5. 193.811516: wake_lat: wakee=(efault)sshd-sessiondelta=129
sshd-session-879 [001] d..5. 193.967576: wake_lat: wakee=(efault)kworker/u34:5delta=50
The length isn't needed as the string is always nul terminated. Just print
the string and not add the length (which was hard coded to the max string
length anyway).
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250407154139.69955768@gandalf.local.home
Fixes: 4d38328eb4 ("tracing: Fix synth event printk format for str fields");
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The NULL array terminator at the end of erratum_1386_microcode was
removed during the switch from x86_cpu_desc to x86_cpu_id. This
causes readers to run off the end of the array.
Replace the NULL.
Fixes: f3f3251526 ("x86/cpu: Move AMD erratum 1386 table over to 'x86_cpu_id'")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Don't fetch it again if we already have it. It seems the
registers don't reliably have the value at resume in some
cases.
Fixes: 785f0f9fe7 ("drm/amdgpu: Add mes v12_0 ip block support (v4)")
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9e7b08d239)
Cc: stable@vger.kernel.org # 6.12.x
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1e866f1fe5 ("drm/amd/pm: Prevent divide by zero")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit da7dc714a8)
Cc: stable@vger.kernel.org
This is normally handled in the gfx IP suspend callbacks, but
for S0ix, those are skipped because we don't want to touch
gfx. So handle it in device suspend.
Fixes: b9467983b7 ("drm/amdgpu: add dynamic workload profile switching for gfx10")
Fixes: 963537ca23 ("drm/amdgpu: add dynamic workload profile switching for gfx11")
Fixes: 5f95a15495 ("drm/amdgpu: add dynamic workload profile switching for gfx12")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 906ad45167)
Cc: stable@vger.kernel.org
To be used for display idle optimizations when
we want to pause non-default profiles.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6dafb5d4c7)
Commit 8284066946 ("ublk: grab request reference when the request is handled
by userspace") doesn't grab request reference in case of recovery reissue.
Then the request can be requeued & re-dispatch & failed when canceling
uring command.
If it is one zc request, the request can be freed before io_uring
returns the zc buffer back, then cause kernel panic:
[ 126.773061] BUG: kernel NULL pointer dereference, address: 00000000000000c8
[ 126.773657] #PF: supervisor read access in kernel mode
[ 126.774052] #PF: error_code(0x0000) - not-present page
[ 126.774455] PGD 0 P4D 0
[ 126.774698] Oops: Oops: 0000 [#1] SMP NOPTI
[ 126.775034] CPU: 13 UID: 0 PID: 1612 Comm: kworker/u64:55 Not tainted 6.14.0_blk+ #182 PREEMPT(full)
[ 126.775676] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014
[ 126.776275] Workqueue: iou_exit io_ring_exit_work
[ 126.776651] RIP: 0010:ublk_io_release+0x14/0x130 [ublk_drv]
Fixes it by always grabbing request reference for aborting the request.
Reported-by: Caleb Sander Mateos <csander@purestorage.com>
Closes: https://lore.kernel.org/linux-block/CADUfDZodKfOGUeWrnAxcZiLT+puaZX8jDHoj_sfHZCOZwhzz6A@mail.gmail.com/
Fixes: 8284066946 ("ublk: grab request reference when the request is handled by userspace")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250409011444.2142010-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Octavian Purdila says:
====================
net_sched: sch_sfq: reject a derived limit of 1
Because sfq parameters can influence each other there can be
situations where although the user sets a limit of 2 it can be lowered
to 1:
$ tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 depth 1
$ tc qdisc show dev dummy0
qdisc sfq 1: dev dummy0 root refcnt 2 limit 1p quantum 1514b depth 1 divisor 1024
$ tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 10 depth 1 divisor 1
$ tc qdisc show dev dummy0
qdisc sfq 2: root refcnt 2 limit 1p quantum 1514b depth 1 divisor 1
As a limit of 1 is invalid, this patch series moves the limit
validation to after all configuration changes have been done. To do
so, the configuration is done in a temporary work area then applied to
the internal state.
The patch series also adds new test cases.
v3:
- remove a couple of unnecessary comments
- rearrange local variables to use reverse Christmas tree style
declaration order
v2: https://lore.kernel.org/all/20250402162750.1671155-1-tavip@google.com/
- remove tmp struct and directly use local variables
v1: https://lore.kernel.org/all/20250328201634.3876474-1-tavip@google.com/
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
Because the limit is updated indirectly when other parameters are
updated, there are cases where even though the user requests a limit
of 2 it can actually be set to 1.
Add the following test cases to check that the kernel rejects them:
- limit 2 depth 1 flows 1
- limit 2 depth 1 divisor 1
Signed-off-by: Octavian Purdila <tavip@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is not sufficient to directly validate the limit on the data that
the user passes as it can be updated based on how the other parameters
are changed.
Move the check at the end of the configuration update process to also
catch scenarios where the limit is indirectly updated, for example
with the following configurations:
tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 depth 1
tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 divisor 1
This fixes the following syzkaller reported crash:
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:203:6
index 65535 is out of range for type 'struct sfq_head[128]'
CPU: 1 UID: 0 PID: 3037 Comm: syz.2.16 Not tainted 6.14.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x201/0x300 lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:231 [inline]
__ubsan_handle_out_of_bounds+0xf5/0x120 lib/ubsan.c:429
sfq_link net/sched/sch_sfq.c:203 [inline]
sfq_dec+0x53c/0x610 net/sched/sch_sfq.c:231
sfq_dequeue+0x34e/0x8c0 net/sched/sch_sfq.c:493
sfq_reset+0x17/0x60 net/sched/sch_sfq.c:518
qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035
tbf_reset+0x41/0x110 net/sched/sch_tbf.c:339
qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035
dev_reset_queue+0x100/0x1b0 net/sched/sch_generic.c:1311
netdev_for_each_tx_queue include/linux/netdevice.h:2590 [inline]
dev_deactivate_many+0x7e5/0xe70 net/sched/sch_generic.c:1375
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 10685681ba ("net_sched: sch_sfq: don't allow 1 packet limit")
Signed-off-by: Octavian Purdila <tavip@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many configuration parameters have influence on others (e.g. divisor
-> flows -> limit, depth -> limit) and so it is difficult to correctly
do all of the validation before applying the configuration. And if a
validation error is detected late it is difficult to roll back a
partially applied configuration.
To avoid these issues use a temporary work area to update and validate
the configuration and only then apply the configuration to the
internal state.
Signed-off-by: Octavian Purdila <tavip@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not leak the tgtport reference when the work is already scheduled.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The reference counting code can be simplified. Instead taking a tgtport
refrerence at the beginning of nvmet_fc_alloc_hostport and put it back
if not a new hostport object is allocated, only take it when a new
hostport object is allocated.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We need to take for each unique association a reference.
nvmet_fc_alloc_hostport for each newly created association.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
No need for this tiny helper with only one user, let's inline it.
And since the hostport ref counter needs to stay in sync, it's not
optional anymore to give back the reference.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
No need for this tiny helper with only one user, just inline it.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The fcloop_lport objects live time is controlled by the user interface
add_local_port and del_local_port. nport, rport and tport objects are
pointing to the lport objects but here is no clear tracking. Let's
introduce an explicit ref counter for the lport objects and prepare the
stage for restructuring how lports are used.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The kref wrapper is not really adding any value ontop of refcount. Thus
replace the kref API with the refcount API.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The newly element to be added to the list is the first argument of
list_add_tail. This fix is missing dcfad4ab4d ("nvmet-fcloop: swap
the list_add_tail arguments").
Fixes: 437c0b824d ("nvme-fcloop: add target to host LS request support")
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
IBPB is expected to clear the RSB. However, if X86_BUG_IBPB_NO_RET is
set, that doesn't happen. Make indirect_branch_prediction_barrier()
take that into account by calling write_ibpb() which clears RSB on
X86_BUG_IBPB_NO_RET:
/* Make sure IBPB clears return stack preductions too. */
FILL_RETURN_BUFFER %rax, RSB_CLEAR_LOOPS, X86_BUG_IBPB_NO_RET
Note that, as of the previous patch, write_ibpb() also reads
'x86_pred_cmd' in order to use SBPB when applicable:
movl _ASM_RIP(x86_pred_cmd), %eax
Therefore that existing behavior in indirect_branch_prediction_barrier()
is not lost.
Fixes: 50e4b3b940 ("x86/entry: Have entry_ibpb() invalidate return predictions")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/bba68888c511743d4cd65564d1fc41438907523f.1744148254.git.jpoimboe@kernel.org
write_ibpb() does IBPB, which (among other things) flushes branch type
predictions on AMD. If the CPU has SRSO_NO, or if the SRSO mitigation
has been disabled, branch type flushing isn't needed, in which case the
lighter-weight SBPB can be used.
The 'x86_pred_cmd' variable already keeps track of whether IBPB or SBPB
should be used. Use that instead of hardcoding IBPB.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/17c5dcd14b29199b75199d67ff7758de9d9a4928.1744148254.git.jpoimboe@kernel.org
First of all, using 'mmio' prevents proper implementation of 8-bit accessors.
Second, it's simply inconsistent with uart8250 set of options. Rename it to
'mmio32'. While at it, remove rather misleading comment in the documentation.
From now on mmio32 is self-explanatory and pciserial supports not only 32-bit
MMIO accessors.
Also, while at it, fix the comment for the "pciserial" case. The comment
seems to be a copy'n'paste error when mentioning "serial" instead of
"pciserial" (with double quotes). Fix this.
With that, move it upper, so we don't calculate 'buf' twice.
Fixes: 3181424aea ("x86/early_printk: Add support for MMIO-based UARTs")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Link: https://lore.kernel.org/r/20250407172214.792745-1-andriy.shevchenko@linux.intel.com
In PMU event initialization functions
- cpumsf_pmu_event_init()
- cpumf_pmu_event_init()
- cfdiag_event_init()
the partially created event had to be removed when an error was detected.
The event::event_init() member function had to release all resources
it allocated in case of error. event::destroy() had to be called
on freeing an event after it was successfully created and
event::event_init() returned success.
With
commit c70ca29803 ("perf/core: Simplify the perf_event_alloc() error path")
this is not necessary anymore. The performance subsystem common
code now always calls event::destroy() to clean up the allocated
resources created during event initialization.
Remove the event::destroy() invocation in PMU event initialization
or that function is called twice for each event that runs into an
error condition in event creation.
This is the kernel log entry which shows up without the fix:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 43388 at lib/refcount.c:87 refcount_dec_not_one+0x74/0x90
CPU: 0 UID: 0 PID: 43388 Comm: perf Not tainted 6.15.0-20250407.rc1.git0.300.fc41.s390x+git #1 NONE
Hardware name: IBM 3931 A01 704 (LPAR)
Krnl PSW : 0704c00180000000 00000209cb2c1b88 (refcount_dec_not_one+0x78/0x90)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 0000020900000027 0000020900000023 0000000000000026 0000018900000000
00000004a2200a00 0000000000000000 0000000000000057 ffffffffffffffea
00000002b386c600 00000002b3f5b3e0 00000209cc51f140 00000209cc7fc550
0000000001449d38 ffffffffffffffff 00000209cb2c1b84 00000189d67dfb80
Krnl Code: 00000209cb2c1b78: c02000506727 larl %r2,00000209cbcce9c6
00000209cb2c1b7e: c0e5ffbd4431 brasl %r14,00000209caa6a3e0
#00000209cb2c1b84: af000000 mc 0,0
>00000209cb2c1b88: a7480001 lhi %r4,1
00000209cb2c1b8c: ebeff0a00004 lmg %r14,%r15,160(%r15)
00000209cb2c1b92: ec243fbf0055 risbg %r2,%r4,63,191,0
00000209cb2c1b98: 07fe bcr 15,%r14
00000209cb2c1b9a: 47000700 bc 0,1792
Call Trace:
[<00000209cb2c1b88>] refcount_dec_not_one+0x78/0x90
[<00000209cb2c1dc4>] refcount_dec_and_mutex_lock+0x24/0x90
[<00000209caa3c29e>] hw_perf_event_destroy+0x2e/0x80
[<00000209cacaf8b4>] __free_event+0x74/0x270
[<00000209cacb47c4>] perf_event_alloc.part.0+0x4a4/0x730
[<00000209cacbf3e8>] __do_sys_perf_event_open+0x248/0xc20
[<00000209cacc14a4>] __s390x_sys_perf_event_open+0x44/0x50
[<00000209cb8114de>] __do_syscall+0x12e/0x260
[<00000209cb81ce34>] system_call+0x74/0x98
Last Breaking-Event-Address:
[<00000209caa6a4d2>] __warn_printk+0xf2/0x100
---[ end trace 0000000000000000 ]---
Fixes: c70ca29803 ("perf/core: Simplify the perf_event_alloc() error path")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Update CPU Measurement counter facility support for the
extended counter set for machine types 9175 and 9176.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add config and compile options which allow to compile with z17
optimizations if the compiler supports it. Add the
miscellaneous-instruction-extension 4 facility to the list of facilities
for z17.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add detection for machine types 0x9175 and 0x9176 and set ELF platform
name to z17.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
If we finds a vq without a name in our input array in
virtio_ccw_find_vqs(), we treat it as "non-existing" and set the vq pointer
to NULL; we will not call virtio_ccw_setup_vq() to allocate/setup a vq.
Consequently, we create only a queue if it actually exists (name != NULL)
and assign an incremental queue index to each such existing queue.
However, in virtio_ccw_register_adapter_ind()->get_airq_indicator() we
will not ignore these "non-existing queues", but instead assign an airq
indicator to them.
Besides never releasing them in virtio_ccw_drop_indicators() (because
there is no virtqueue), the bigger issue seems to be that there will be a
disagreement between the device and the Linux guest about the airq
indicator to be used for notifying a queue, because the indicator bit
for adapter I/O interrupt is derived from the queue index.
The virtio spec states under "Setting Up Two-Stage Queue Indicators":
... indicator contains the guest address of an area wherein the
indicators for the devices are contained, starting at bit_nr, one
bit per virtqueue of the device.
And further in "Notification via Adapter I/O Interrupts":
For notifying the driver of virtqueue buffers, the device sets the
bit in the guest-provided indicator area at the corresponding
offset.
For example, QEMU uses in virtio_ccw_notify() the queue index (passed as
"vector") to select the relevant indicator bit. If a queue does not exist,
it does not have a corresponding indicator bit assigned, because it
effectively doesn't have a queue index.
Using a virtio-balloon-ccw device under QEMU with free-page-hinting
disabled ("free-page-hint=off") but free-page-reporting enabled
("free-page-reporting=on") will result in free page reporting
not working as expected: in the virtio_balloon driver, we'll be stuck
forever in virtballoon_free_page_report()->wait_event(), because the
waitqueue will not be woken up as the notification from the device is
lost: it would use the wrong indicator bit.
Free page reporting stops working and we get splats (when configured to
detect hung wqs) like:
INFO: task kworker/1:3:463 blocked for more than 61 seconds.
Not tainted 6.14.0 #4
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/1:3 [...]
Workqueue: events page_reporting_process
Call Trace:
[<000002f404e6dfb2>] __schedule+0x402/0x1640
[<000002f404e6f22e>] schedule+0x3e/0xe0
[<000002f3846a88fa>] virtballoon_free_page_report+0xaa/0x110 [virtio_balloon]
[<000002f40435c8a4>] page_reporting_process+0x2e4/0x740
[<000002f403fd3ee2>] process_one_work+0x1c2/0x400
[<000002f403fd4b96>] worker_thread+0x296/0x420
[<000002f403fe10b4>] kthread+0x124/0x290
[<000002f403f4e0dc>] __ret_from_fork+0x3c/0x60
[<000002f404e77272>] ret_from_fork+0xa/0x38
There was recently a discussion [1] whether the "holes" should be
treated differently again, effectively assigning also non-existing
queues a queue index: that should also fix the issue, but requires other
workarounds to not break existing setups.
Let's fix it without affecting existing setups for now by properly ignoring
the non-existing queues, so the indicator bits will match the queue
indexes.
[1] https://lore.kernel.org/all/cover.1720611677.git.mst@redhat.com/
Fixes: a229989d97 ("virtio: don't allocate vqs when names[i] = NULL")
Reported-by: Chandra Merla <cmerla@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20250402203621.940090-1-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Since
741c10b096 ("kernfs: Use RCU to access kernfs_node::name.")
a helper rdt_kn_name() that checks that rdtgroup_mutex is held has been used
for all accesses to the kernfs node name.
rdtgroup_mkdir() uses the name to determine if a valid monitor group is being
created by checking the parent name is "mon_groups". This is done without
holding rdtgroup_mutex, and now triggers the following warning:
| WARNING: suspicious RCU usage
| 6.15.0-rc1 #4465 Tainted: G E
| -----------------------------
| arch/x86/kernel/cpu/resctrl/internal.h:408 suspicious rcu_dereference_check() usage!
[...]
| Call Trace:
| <TASK>
| dump_stack_lvl
| lockdep_rcu_suspicious.cold
| is_mon_groups
| rdtgroup_mkdir
| kernfs_iop_mkdir
| vfs_mkdir
| do_mkdirat
| __x64_sys_mkdir
| do_syscall_64
| entry_SYSCALL_64_after_hwframe
Creating a control or monitor group calls mkdir_rdt_prepare(), which uses
rdtgroup_kn_lock_live() to take the rdtgroup_mutex.
To avoid taking and dropping the lock, move the check for the monitor group
name and position into mkdir_rdt_prepare() so that it occurs under
rdtgroup_mutex. Hoist is_mon_groups() earlier in the file.
[ bp: Massage. ]
Fixes: 741c10b096 ("kernfs: Use RCU to access kernfs_node::name.")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250407124637.2433230-1-james.morse@arm.com
Commit 1be52169c3 ("nvme-tcp: fix selinux denied when calling
sock_sendmsg") converted sock_create() in nvme_tcp_alloc_queue()
to sock_create_kern().
sock_create_kern() creates a kernel socket, which does not hold
a reference to netns. If the code does not manage the netns
lifetime properly, use-after-free could happen.
Also, TCP kernel socket with sk_net_refcnt 0 has a socket leak
problem: it remains FIN_WAIT_1 if it misses FIN after close()
because tcp_close() stops all timers.
To fix such problems, let's hold netns ref by sk_net_refcnt_upgrade().
We had the same issue in CIFS, SMC, etc, and applied the same
solution, see commit ef7134c7fc ("smb: client: Fix use-after-free
of network namespace.") and commit 9744d2bf19 ("smc: Fix
use-after-free in tcp_write_timer_handler().").
Fixes: 1be52169c3 ("nvme-tcp: fix selinux denied when calling sock_sendmsg")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The function pdc20621_prog_dimm0() calls the function pdc20621_i2c_read()
but does not handle the error if the read fails. This could lead to
process with invalid data. A proper implementation can be found in
/source/drivers/ata/sata_sx4.c, pdc20621_prog_dimm_global(). As mentioned
in its commit: bb44e154e2, the variable spd0
might be used uninitialized when pdc20621_i2c_read() fails.
Add error handling to pdc20621_i2c_read(). If a read operation fails,
an error message is logged via dev_err(), and return a negative error
code.
Add error handling to pdc20621_prog_dimm0() in pdc20621_dimm_init(), and
return a negative error code if pdc20621_prog_dimm0() fails.
Fixes: 4447d35156 ("libata: convert the remaining SATA drivers to new init model")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Pull kunit fixes from Shuah Khan:
- Fix the tool to report test count in case of a late test plan when
tests are specified before the test plan
- Fix spelling error
* tag 'linux_kselftest-kunit-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Spelling s/slowm/slow/
kunit: tool: fix count of tests if late test plan
MS-FSCC in section 2.1.2.7 LX SYMLINK REPARSE_DATA_BUFFER now contains
documentation about WSL symlink reparse point buffers.
https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-fscc/68337353-9153-4ee1-ac6b-419839c3b7ad
Fix the struct reparse_wsl_symlink_data_buffer to reflect buffer fields
according to the MS-FSCC documentation.
Fix the Linux SMB client to correctly fill the WSL symlink reparse point
buffer when creaing new WSL-style symlink. There was a mistake during
filling the data part of the reparse point buffer. It should starts with
bytes "\x02\x00\x00\x00" (which represents version 2) but this constant was
written as number 0x02000000 encoded in little endian, which resulted bytes
"\x00\x00\x00\x02". This change is fixing this mistake.
Fixes: 4e2043be5c ("cifs: Add support for creating WSL-style symlinks")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
page_pool_dev_alloc_pages could return NULL. There was a WARN_ON(!page)
but it would still proceed to use the NULL pointer and then crash.
This is similar to commit 001ba09020
("net: fec: handle page_pool_dev_alloc_pages error").
This is found by our static analysis tool KNighter.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: 3c47e8ae11 ("net: libwx: Support to receive packets in NAPI")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250407184952.2111299-1-chenyuan0y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Recently, during a debugging session using local MPTCP connections, I
noticed MPJoinAckHMacFailure was strangely not zero on the server side.
The first patch fixes this issue -- present since v5.9 -- and the second
one validates it in the selftests.
====================
Link: https://patch.msgid.link/20250407-net-mptcp-hmac-failure-mib-v1-0-3c9ecd0a3a50@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, during a debugging session using local MPTCP connections, I
noticed MPJoinAckHMacFailure was not zero on the server side. The
counter was in fact incremented when the PM rejected new subflows,
because the 'subflow' limit was reached.
The fix is easy, simply dissociating the two cases: only the HMAC
validation check should increase MPTCP_MIB_JOINACKMAC counter.
Fixes: 4cf8b7e48a ("subflow: introduce and use mptcp_can_accept_new_subflow()")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407-net-mptcp-hmac-failure-mib-v1-1-3c9ecd0a3a50@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running the mincore_selftest on a system with an XFS file system, it
failed the "check_file_mmap" test case due to the read-ahead pages reaching
the end of the file. The failure log is as below:
RUN global.check_file_mmap ...
mincore_selftest.c:264:check_file_mmap:Expected i (1024) < vec_size (1024)
mincore_selftest.c:265:check_file_mmap:Read-ahead pages reached the end of the file
check_file_mmap: Test failed
FAIL global.check_file_mmap
This is because the read-ahead window size of the XFS file system on this
machine is 4 MB, which is larger than the size from the #PF address to the
end of the file. As a result, all the pages for this file are populated.
blockdev --getra /dev/nvme0n1p5
8192
blockdev --getbsz /dev/nvme0n1p5
512
This issue can be fixed by extending the current FILE_SIZE 4MB to a larger
number, but it will still fail if the read-ahead window size of the file
system is larger enough. Additionally, in the real world, read-ahead pages
reaching the end of the file can happen and is an expected behavior.
Therefore, allowing read-ahead pages to reach the end of the file is a
better choice for the "check_file_mmap" test case.
Link: https://lore.kernel.org/r/20250311080940.21413-1-qiuxu.zhuo@intel.com
Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use POSIX-conformant expression operator symbol '='.
The use of the non POSIX-conformant symbol '==' would work
in bash, but not in sh where the unexpected operator error
would result in test_smoke.sh being skipped.
Instead of changing the shebang to use bash, which may not be
available on all systems, use the POSIX-conformant expression
symbol '=' to test for equality.
Without this patch:
===================
# make -j8 TARGETS=tpm2 kselftest
# selftests: tpm2: test_smoke.sh
# ./test_smoke.sh: 9: [: 2: unexpected operator
ok 1 selftests: tpm2: test_smoke.sh # SKIP
With this patch:
================
# make -j8 TARGETS=tpm2 kselftest
# selftests: tpm2: test_smoke.sh
# Ran 9 tests in 9.236s
ok 1 selftests: tpm2: test_smoke.sh
Link: https://lore.kernel.org/r/37ztyakgrrtgvec344mg7mspchwjpxxtsprtjidso3pwkmm4f4@awsa5mzgqmtb
Signed-off-by: Ahmed Salem <x0rw3ll@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA
- Use acquire/release semantics in the KVM FF-A proxy to avoid
reading a stale value for the FF-A version
- Fix KVM guest driver to match PV CPUID hypercall ABI
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work
s390:
- Don't use %pK for debug printing and tracepoints
x86:
- Use a separate subclass when acquiring KVM's per-CPU posted
interrupts wakeup lock in the scheduled out path, i.e. when adding
a vCPU on the list of vCPUs to wake, to workaround a false positive
deadlock. The schedule out code runs with a scheduler lock that the
wakeup handler takes in the opposite order; but it does so with
IRQs disabled and cannot run concurrently with a wakeup
- Explicitly zero-initialize on-stack CPUID unions
- Allow building irqbypass.ko as as module when kvm.ko is a module
- Wrap relatively expensive sanity check with KVM_PROVE_MMU
- Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
- Add more scenarios to the MONITOR/MWAIT test
- Add option to rseq test to override /dev/cpu_dma_latency
- Bring list of exit reasons up to date
- Cleanup Makefile to list once tests that are valid on all
architectures
Other:
- Documentation fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: arm64: Use acquire/release to communicate FF-A version negotiation
KVM: arm64: selftests: Explicitly set the page attrs to Inner-Shareable
KVM: arm64: selftests: Introduce and use hardware-definition macros
KVM: VMX: Use separate subclasses for PI wakeup lock to squash false positive
KVM: VMX: Assert that IRQs are disabled when putting vCPU on PI wakeup list
KVM: x86: Explicitly zero-initialize on-stack CPUID unions
KVM: Allow building irqbypass.ko as as module when kvm.ko is a module
KVM: x86/mmu: Wrap sanity check on number of TDP MMU pages with KVM_PROVE_MMU
KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency
KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
Documentation: kvm: remove KVM_CAP_MIPS_TE
Documentation: kvm: organize capabilities in the right section
Documentation: kvm: fix some definition lists
Documentation: kvm: drop "Capability" heading from capabilities
Documentation: kvm: give correct name for KVM_CAP_SPAPR_MULTITCE
Documentation: KVM: KVM_GET_SUPPORTED_CPUID now exposes TSC_DEADLINE
selftests: kvm: list once tests that are valid on all architectures
selftests: kvm: bring list of exit reasons up to date
selftests: kvm: revamp MONITOR/MWAIT tests
KVM: arm64: Don't translate FAR if invalid/unsafe
...
Pull probes fixes from Masami Hiramatsu:
- fprobe: remove fprobe_hlist_node when module unloading
When a fprobe target module is removed, the fprobe_hlist_node should
be removed from the fprobe's hash table to prevent reusing
accidentally if another module is loaded at the same address.
- fprobe: lock module while registering fprobe
The module containing the function to be probeed is locked using a
reference counter until the fprobe registration is complete, which
prevents use after free.
- fprobe-events: fix possible UAF on modules
Basically as same as above, but in the fprobe-events layer we also
need to get module reference counter when we find the tracepoint in
the module.
* tag 'probes-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: fprobe: Cleanup fprobe hash when module unloading
tracing: fprobe events: Fix possible UAF on modules
tracing: fprobe: Fix to lock module while registering fprobe
Pull cgroup fixes from Tejun Heo:
- A number of cpuset remote partition related fixes and cleanups along
with selftest updates.
- A change from this merge window made cgroup_rstat_updated_list()
called outside cgroup_rstat_lock leading to list corruptions. Fix it
by relocating the call inside the lock.
* tag 'cgroup-for-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Fix race between newly created partition and dying one
cgroup: rstat: call cgroup_rstat_updated_list with cgroup_rstat_lock
selftest/cgroup: Add a remote partition transition test to test_cpuset_prs.sh
selftest/cgroup: Clean up and restructure test_cpuset_prs.sh
selftest/cgroup: Update test_cpuset_prs.sh to use | as effective CPUs and state separator
cgroup/cpuset: Remove unneeded goto in sched_partition_write() and rename it
cgroup/cpuset: Code cleanup and comment update
cgroup/cpuset: Don't allow creation of local partition over a remote one
cgroup/cpuset: Remove remote_partition_check() & make update_cpumasks_hier() handle remote partition
cgroup/cpuset: Fix error handling in remote_partition_disable()
cgroup/cpuset: Fix incorrect isolated_cpus update in update_parent_effective_cpumask()
Pull CRC cleanups from Eric Biggers:
"Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc: remove CONFIG_LIBCRC32C
lib/crc: document all the CRC library kconfig options
lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T
lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF
lib/crc: remove unnecessary prompt for CONFIG_CRC16
lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT
lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'
A recent optimization change in LLVM [1] aims to transform certain loop
idioms into calls to strlen() or wcslen(). This change transforms the
first while loop in UniStrcat() into a call to wcslen(), breaking the
build when UniStrcat() gets inlined into alloc_path_with_tree_prefix():
ld.lld: error: undefined symbol: wcslen
>>> referenced by nls_ucs2_utils.h:54 (fs/smb/client/../../nls/nls_ucs2_utils.h:54)
>>> vmlinux.o:(alloc_path_with_tree_prefix)
>>> referenced by nls_ucs2_utils.h:54 (fs/smb/client/../../nls/nls_ucs2_utils.h:54)
>>> vmlinux.o:(alloc_path_with_tree_prefix)
Disable this optimization with '-fno-builtin-wcslen', which prevents the
compiler from assuming that wcslen() is available in the kernel's C
library.
[ More to the point - it's not that we couldn't implement wcslen(), it's
that this isn't an optimization at all in the context of the kernel.
Replacing a simple inlined loop with a function call to the same loop
is just stupid and pointless if you don't have long strings and fancy
libraries with vectorization support etc.
For the regular 'strlen()' cases, we want the compiler to do this in
order to handle the trivial case of constant strings. And we do have
optimized versions of 'strlen()' on some architectures. But for
wcslen? Just no. - Linus ]
Cc: stable@vger.kernel.org
Link: 9694844d7e [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Perf can hang while freeing a sigtrap event if a related deferred
signal hadn't managed to be sent before the file got closed:
perf_event_overflow()
task_work_add(perf_pending_task)
fput()
task_work_add(____fput())
task_work_run()
____fput()
perf_release()
perf_event_release_kernel()
_free_event()
perf_pending_task_sync()
task_work_cancel() -> FAILED
rcuwait_wait_event()
Once task_work_run() is running, the list of pending callbacks is
removed from the task_struct and from this point on task_work_cancel()
can't remove any pending and not yet started work items, hence the
task_work_cancel() failure and the hang on rcuwait_wait_event().
Task work could be changed to remove one work at a time, so a work
running on the current task can always cancel a pending one, however
the wait / wake design is still subject to inverted dependencies when
remote targets are involved, as pictured by Oleg:
T1 T2
fd = perf_event_open(pid => T2->pid); fd = perf_event_open(pid => T1->pid);
close(fd) close(fd)
<IRQ> <IRQ>
perf_event_overflow() perf_event_overflow()
task_work_add(perf_pending_task) task_work_add(perf_pending_task)
</IRQ> </IRQ>
fput() fput()
task_work_add(____fput()) task_work_add(____fput())
task_work_run() task_work_run()
____fput() ____fput()
perf_release() perf_release()
perf_event_release_kernel() perf_event_release_kernel()
_free_event() _free_event()
perf_pending_task_sync() perf_pending_task_sync()
rcuwait_wait_event() rcuwait_wait_event()
Therefore the only option left is to acquire the event reference count
upon queueing the perf task work and release it from the task work, just
like it was done before 3a5465418f ("perf: Fix event leak upon exec and file release")
but without the leaks it fixed.
Some adjustments are necessary to make it work:
* A child event might dereference its parent upon freeing. Care must be
taken to release the parent last.
* Some places assuming the event doesn't have any reference held and
therefore can be freed right away must instead put the reference and
let the reference counting to its job.
Reported-by: "Yi Lai" <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/Zx9Losv4YcJowaP%2F@ly-workstation/
Reported-by: syzbot+3c4321e10eea460eb606@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/673adf75.050a0220.87769.0024.GAE@google.com/
Fixes: 3a5465418f ("perf: Fix event leak upon exec and file release")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250304135446.18905-1-frederic@kernel.org
The tfilter_notify() and tfilter_del_notify() functions assume that
NLMSG_GOODSIZE is always enough to dump the filter chain. This is not
always the case, which can lead to silent notify failures (because the
return code of tfilter_notify() is not always checked). In particular,
this can lead to NLM_F_ECHO not being honoured even though an action
succeeds, which forces userspace to create workarounds[0].
Fix this by increasing the message size if dumping the filter chain into
the allocated skb fails. Use the size of the incoming skb as a size hint
if set, so we can start at a larger value when appropriate.
To trigger this, run the following commands:
# ip link add type veth
# tc qdisc replace dev veth0 root handle 1: fq_codel
# tc -echo filter add dev veth0 parent 1: u32 match u32 0 0 $(for i in $(seq 32); do echo action pedit munge ip dport set 22; done)
Before this fix, tc just returns:
Not a filter(cmd 2)
After the fix, we get the correct echo:
added filter dev veth0 parent 1: protocol all pref 49152 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 terminal flowid not_in_hw
match 00000000/00000000 at 0
action order 1: pedit action pass keys 1
index 1 ref 1 bind 1
key #0 at 20: val 00000016 mask ffff0000
[repeated 32 times]
[0] 106ef21860
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Frode Nordahl <frode.nordahl@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/openvswitch/+bug/2018500
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250407105542.16601-1-toke@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When running as a PVH dom0 the ACPI tables exposed to Linux are (mostly)
the native ones, thus exposing the C and P states, that can lead to
attachment of CPU idle and frequency drivers. However the entity in
control of the CPU C and P states is Xen, as dom0 doesn't have a full view
of the system load, neither has all CPUs assigned and identity pinned.
Like it's done for classic PV guests, prevent Linux from using idle or
frequency state drivers when running as a PVH dom0.
On an AMD EPYC 7543P system without this fix a Linux PVH dom0 will keep the
host CPUs spinning at 100% even when dom0 is completely idle, as it's
attempting to use the acpi_idle driver.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250407101842.67228-1-roger.pau@citrix.com>
The current code configures the Physical Function (PF) root node at TL1
and the Virtual Function (VF) root node at TL2.
This ensure at any given point of time PF traffic gets more priority.
PF root node
TL1
/ \
TL2 TL2 VF root node
/ \
TL3 TL3
/ \
TL4 TL4
/ \
SMQ SMQ
Due to a bug in the current code, the TL2 parent queue index on the
VF interface is not being configured, leading to 'SMQ Flush' errors
Fixes: 5e6808b4c6 ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407070341.2765426-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
KVM/arm64: First batch of fixes for 6.15
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA.
- Use acquire/release semantics in the KVM FF-A proxy to avoid reading
a stale value for the FF-A version.
- Fix KVM guest driver to match PV CPUID hypercall ABI.
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work.
syzbot discovered that it can disconnect a TLS socket and then
run into all sort of unexpected corner cases. I have a vague
recollection of Eric pointing this out to us a long time ago.
Supporting disconnect is really hard, for one thing if offload
is enabled we'd need to wait for all packets to be _acked_.
Disconnect is not commonly used, disallow it.
The immediate problem syzbot run into is the warning in the strp,
but that's just the easiest bug to trigger:
WARNING: CPU: 0 PID: 5834 at net/tls/tls_strp.c:486 tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486
RIP: 0010:tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486
Call Trace:
<TASK>
tls_rx_rec_wait+0x280/0xa60 net/tls/tls_sw.c:1363
tls_sw_recvmsg+0x85c/0x1c30 net/tls/tls_sw.c:2043
inet6_recvmsg+0x2c9/0x730 net/ipv6/af_inet6.c:678
sock_recvmsg_nosec net/socket.c:1023 [inline]
sock_recvmsg+0x109/0x280 net/socket.c:1045
__sys_recvfrom+0x202/0x380 net/socket.c:2237
Fixes: 3c4d755915 ("tls: kernel TLS support")
Reported-by: syzbot+b4cd76826045a1eb93c1@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250404180334.3224206-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
sctp_sendmsg() re-uses associations and transports when possible by
doing a lookup based on the socket endpoint and the message destination
address, and then sctp_sendmsg_to_asoc() sets the selected transport in
all the message chunks to be sent.
There's a possible race condition if another thread triggers the removal
of that selected transport, for instance, by explicitly unbinding an
address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have
been set up and before the message is sent. This can happen if the send
buffer is full, during the period when the sender thread temporarily
releases the socket lock in sctp_wait_for_sndbuf().
This causes the access to the transport data in
sctp_outq_select_transport(), when the association outqueue is flushed,
to result in a use-after-free read.
This change avoids this scenario by having sctp_transport_free() signal
the freeing of the transport, tagging it as "dead". In order to do this,
the patch restores the "dead" bit in struct sctp_transport, which was
removed in
commit 47faa1e4c5 ("sctp: remove the dead field of sctp_transport").
Then, in the scenario where the sender thread has released the socket
lock in sctp_wait_for_sndbuf(), the bit is checked again after
re-acquiring the socket lock to detect the deletion. This is done while
holding a reference to the transport to prevent it from being freed in
the process.
If the transport was deleted while the socket lock was relinquished,
sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the
send.
The bug was found by a private syzbot instance (see the error report [1]
and the C reproducer that triggers it [2]).
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport.txt [1]
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport__repro.c [2]
Cc: stable@vger.kernel.org
Fixes: df132eff46 ("sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peer")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250404-kasan_slab-use-after-free_read_in_sctp_outq_select_transport__20250404-v1-1-5ce4a0b78ef2@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cong Wang says:
====================
net_sched: make ->qlen_notify() idempotent
Gerrard reported a vulnerability exists in fq_codel where manipulating
the MTU can cause codel_dequeue() to drop all packets. The parent qdisc's
sch->q.qlen is only updated via ->qlen_notify() if the fq_codel queue
remains non-empty after the drops. This discrepancy in qlen between
fq_codel and its parent can lead to a use-after-free condition.
Let's fix this by making all existing ->qlen_notify() idempotent so that
the sch->q.qlen check will be no longer necessary.
Patch 1~5 make all existing ->qlen_notify() idempotent to prepare for
patch 6 which removes the sch->q.qlen check. They are followed by 5
selftests for each type of Qdisc's we touch here.
All existing and new Qdisc selftests pass after this patchset.
Fixes: 4b549a2ef4 ("fq_codel: Fair Queue Codel AQM")
Fixes: 76e3cc126b ("codel: Controlled Delay AQM")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
====================
Link: https://patch.msgid.link/20250403211033.166059-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hfsc_qlen_notify() is not idempotent either and not friendly
to its callers, like fq_codel_dequeue(). Let's make it idempotent
to ease qdisc_tree_reduce_backlog() callers' life:
1. update_vf() decreases cl->cl_nactive, so we can check whether it is
non-zero before calling it.
2. eltree_remove() always removes RB node cl->el_node, but we can use
RB_EMPTY_NODE() + RB_CLEAR_NODE() to make it safe.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211033.166059-4-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In case the backlog transmit queue for system-importance messages is overloaded,
tipc_link_xmit() returns -ENOBUFS but the skb list is not purged. This leads to
memory leak and failure when a skb is allocated.
This commit fixes this issue by purging the skb list before tipc_link_xmit()
returns.
Fixes: 365ad353c2 ("tipc: reduce risk of user starvation during link congestion")
Signed-off-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250403092431.514063-1-tung.quang.nguyen@est.tech
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Objtool uses an arbitrary rule for INSN_SYSCALL and INSN_SYSRET that
almost works by accident: if it's in a function, control flow continues
after the instruction, otherwise it terminates.
That behavior should instead be based on the semantics of the underlying
instruction. Change INSN_SYSCALL to always preserve control flow and
INSN_SYSRET to always terminate it.
The changed semantic for INSN_SYSCALL requires a tweak to the
!CONFIG_IA32_EMULATION version of xen_entry_SYSCALL_compat(). In Xen,
SYSCALL is a hypercall which usually returns. But in this case it's a
hypercall to IRET which doesn't return. Add UD2 to tell objtool to
terminate control flow, and to prevent undefined behavior at runtime.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com> # for the Xen part
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/19453dfe9a0431b7f016e9dc16d031cad3812a50.1744095216.git.jpoimboe@kernel.org
INSN_CONTEXT_SWITCH is ambiguous. It can represent both call semantics
(SYSCALL, SYSENTER) and return semantics (SYSRET, IRET, RETS, RETU).
Those differ significantly: calls preserve control flow whereas returns
terminate it.
Objtool uses an arbitrary rule for INSN_CONTEXT_SWITCH that almost works
by accident: if in a function, keep going; otherwise stop. It should
instead be based on the semantics of the underlying instruction.
In preparation for improving that, split INSN_CONTEXT_SWITCH into
INSN_SYCALL and INSN_SYSRET.
No functional change.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/19a76c74d2c051d3bc9a775823cafc65ad267a7a.1744095216.git.jpoimboe@kernel.org
The !CONFIG_IA32_EMULATION version of xen_entry_SYSCALL_compat() ends
with a SYSCALL instruction which is classified by objtool as
INSN_CONTEXT_SWITCH.
Unlike validate_branch(), validate_unret() doesn't consider
INSN_CONTEXT_SWITCH in a non-function to be a dead end, so it keeps
going past the end of xen_entry_SYSCALL_compat(), resulting in the
following warning:
vmlinux.o: warning: objtool: xen_reschedule_interrupt+0x2a: RET before UNTRAIN
Fix that by adding INSN_CONTEXT_SWITCH handling to validate_unret() to
match what validate_branch() is already doing.
Fixes: a09a6e2399 ("objtool: Add entry UNRET validation")
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/f5eda46fd09f15b1f5cde3d9ae3b92b958342add.1744095216.git.jpoimboe@kernel.org
The function returns bool so we should return false, not NULL. No
functional changes are expected.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When scanning for new namespaces we might have missed an ANA AEN.
The NVMe base spec (NVMe Base Specification v2.1, Figure 151 'Asynchonous
Event Information - Notice': Asymmetric Namespace Access Change) states:
A controller shall not send this even if an Attached Namespace
Attribute Changed asynchronous event [...] is sent for the same event.
so we need to re-read the ANA log page after we rescanned the namespace
list to update the ANA states of the new namespaces.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
devm_ioremap() returns NULL on error. Currently, pxa_ata_probe() does
not check for this case, which can result in a NULL pointer dereference.
Add NULL check after devm_ioremap() to prevent this issue.
Fixes: 2dc6c6f15d ("[ARM] pata_pxa: DMA-capable PATA driver")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Cleanup fprobe address hash table on module unloading because the
target symbols will be disappeared when unloading module and not
sure the same symbol is mapped on the same address.
Note that this is at least disables the fprobes if a part of target
symbols on the unloaded modules. Unlike kprobes, fprobe does not
re-enable the probe point by itself. To do that, the caller should
take care register/unregister fprobe when loading/unloading modules.
This simplifies the fprobe state managememt related to the module
loading/unloading.
Link: https://lore.kernel.org/all/174343534473.843280.13988101014957210732.stgit@devnote2/
Fixes: 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The pKVM FF-A proxy rejects FF-A requests other than FFA_VERSION until
version negotiation is complete, which is signalled by setting the
global 'has_version_negotiated' variable.
To avoid excessive locking, this variable is checked directly from
kvm_host_ffa_handler() in response to an FF-A call, but this can race
against another CPU performing the negotiation and potentially lead to
reading a torn value (incredibly unlikely for a 'bool') or problematic
re-ordering of the accesses to 'has_version_negotiated' and
'hyp_ffa_version' whereby a stale version number could be read by
__do_ffa_mem_xfer().
Use acquire/release primitives when writing 'has_version_negotiated'
with the version lock held and when reading without the lock held.
Cc: Sebastian Ene <sebastianene@google.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Quentin Perret <qperret@google.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Marc Zyngier <maz@kernel.org>
Fixes: c9c012625e ("KVM: arm64: Trap FFA_VERSION host call in pKVM")
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250407152755.1041-1-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Historically, the Vertex Fetcher unit has not been an L3 client. That
meant that, when a buffer containing vertex data was written to, it was
necessary to issue a PIPE_CONTROL::VF Cache Invalidate to invalidate any
VF L2 cachelines associated with that buffer, so the new value would be
properly read from memory.
Since Tigerlake and later, VERTEX_BUFFER_STATE and 3DSTATE_INDEX_BUFFER
have included an "L3 Bypass Enable" bit which userspace drivers can set
to request that the vertex fetcher unit snoop L3. However, unlike most
true L3 clients, the "VF Cache Invalidate" bit continues to only
invalidate the VF L2 cache - and not any associated L3 lines.
To handle that, PIPE_CONTROL has a new "L3 Read Only Cache Invalidation
Bit", which according to the docs, "controls the invalidation of the
Geometry streams cached in L3 cache at the top of the pipe." In other
words, the vertex and index buffer data that gets cached in L3 when
"L3 Bypass Disable" is set.
Mesa always sets L3 Bypass Disable so that the VF unit snoops L3, and
whenever it issues a VF Cache Invalidate, it also issues a L3 Read Only
Cache Invalidate so that both L2 and L3 vertex data is invalidated.
xe is issuing VF cache invalidates too (which handles cases like CPU
writes to a buffer between GPU batches). Because userspace may enable
L3 snooping, it needs to issue an L3 Read Only Cache Invalidate as well.
Fixes significant flickering in Firefox on Meteorlake, which was writing
to vertex buffers via the CPU between batches; the missing L3 Read Only
invalidates were causing the vertex fetcher to read stale data from L3.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4460
Fixes: 6ef3bb6055 ("drm/xe: enable lite restore")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250330165923.56410-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 61672806b5)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Building the xe driver for i386 results in a link time warning:
x86_64-linux-ld: drivers/gpu/drm/xe/xe_migrate.o: in function `xe_migrate_vram':
xe_migrate.c:(.text+0x1e15): undefined reference to `__udivdi3'
Avoid this by using DIV_U64_ROUND_UP() instead of DIV_ROUND_UP(). The driver
is unlikely to be used on 32=bit hardware, so the extra cost here is not
too important.
Fixes: 9c44fd5f6e ("drm/xe: Add migrate layer functions for SVM support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250324210612.2927194-1-arnd@kernel.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit c909225750)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Sysfs_ops needs to be defined on all directories which
can have attr files with set/get method. Add sysfs_ops
to even those directories which is currently empty but
would have attr files with set/get method in future.
Leave .default with default sysfs_ops as it will never
have setter method.
V2(Himal/Rodrigo):
- use single sysfs_ops for all dir and attr with set/get
- add default ops as ./default does not need runtime pm at all
Fixes: 3f0e14651a ("drm/xe: Runtime PM wake on every sysfs call")
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250327122647.886637-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit 40780b9760)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
KIQ invalidate_tlbs request has been seen to marginally exceed the
configured 100 ms timeout on systems under load.
All other KIQ requests in the driver use a 10 second timeout. Use a
similar timeout implementation on the invalidate_tlbs path.
v2: Poll once before msleep
v3: Fix return value
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The page_link lower bits of the first sg could contain something like
SG_END, if we are mapping a single VRAM page or contiguous blob which
fits into one sg entry. Rather pull out the struct page, and use that in
our check to know if we mapped struct pages vs VRAM.
Fixes: f44ffd677f ("drm/amdgpu: add support for exporting VRAM using DMA-buf v3")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid a false-positive lockdep warning in the CONFIG_PREEMPT_RT=y
configuration when using write_seqcount_begin() in the uprobe timer
callback by using raw_write_* APIs.
Uprobe's use of timer callback is guaranteed to not race with itself
for a given uprobe_task, and as such seqcount's insistence on having
preemption disabled on the writer side is irrelevant. So switch to
raw_ variants of seqcount API instead of disabling preemption unnecessarily.
Also, point out in the comments more explicitly why we use seqcount
despite our reader side being rather simple and never retrying. We favor
well-maintained kernel primitive in favor of open-coding our own memory
barriers.
Fixes: 8622e45b5d ("uprobes: Reuse return_instances between multiple uretprobes within task")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Suggested-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20250404194848.2109539-1-andrii@kernel.org
Taehee Yoo says:
====================
fix wrong hds-thresh value setting
A hds-thresh value is not set correctly if input value is 0.
The cause is that ethtool_ringparam_get_cfg(), which is a internal
function that returns ringparameters from both ->get_ringparam() and
dev->cfg can't return a correct hds-thresh value.
The first patch fixes ethtool_ringparam_get_cfg() to set hds-thresh
value correcltly.
The second patch adds random test for hds-thresh value.
So that we can test 0 value for a hds-thresh properly.
====================
Link: https://patch.msgid.link/20250404122126.1555648-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hds.py has been testing 0(set_hds_thresh_zero()),
MAX(set_hds_thresh_max()), GT(set_hds_thresh_gt()) values for hds-thresh.
However if a hds-thresh value was already 0, set_hds_thresh_zero()
can't test properly.
So, it tests random value first and then tests 0, MAX, GT values.
Testing bnxt:
TAP version 13
1..13
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable # SKIP disabling of HDS not supported by
the device
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_random
ok 6 hds.set_hds_thresh_zero
ok 7 hds.set_hds_thresh_max
ok 8 hds.set_hds_thresh_gt
ok 9 hds.set_xdp
ok 10 hds.enabled_set_xdp
ok 11 hds.ioctl
ok 12 hds.ioctl_set_xdp
ok 13 hds.ioctl_enabled_set_xdp
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:1 error:0
Testing lo:
TAP version 13
1..13
ok 1 hds.get_hds # SKIP tcp-data-split not supported by device
ok 2 hds.get_hds_thresh # SKIP hds-thresh not supported by device
ok 3 hds.set_hds_disable # SKIP ring-set not supported by the device
ok 4 hds.set_hds_enable # SKIP ring-set not supported by the device
ok 5 hds.set_hds_thresh_random # SKIP hds-thresh not supported by
device
ok 6 hds.set_hds_thresh_zero # SKIP ring-set not supported by the
device
ok 7 hds.set_hds_thresh_max # SKIP hds-thresh not supported by
device
ok 8 hds.set_hds_thresh_gt # SKIP hds-thresh not supported by device
ok 9 hds.set_xdp # SKIP tcp-data-split not supported by device
ok 10 hds.enabled_set_xdp # SKIP tcp-data-split not supported by
device
ok 11 hds.ioctl # SKIP tcp-data-split not supported by device
ok 12 hds.ioctl_set_xdp # SKIP tcp-data-split not supported by
device
ok 13 hds.ioctl_enabled_set_xdp # SKIP tcp-data-split not supported
by device
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:13 error:0
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250404122126.1555648-3-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When hds-thresh is configured, ethnl_set_rings() is called, and it calls
ethtool_ringparam_get_cfg() to get ringparameters from .get_ringparam()
callback and dev->cfg.
Both hds_config and hds_thresh values should be set from dev->cfg, not
from .get_ringparam().
But ethtool_ringparam_get_cfg() sets only hds_config from dev->cfg.
So, ethtool_ringparam_get_cfg() returns always a hds_thresh as 0.
If an input value of hds-thresh is 0, a hds_thresh value from
ethtool_ringparam_get_cfg() are same. So ethnl_set_rings() does
nothing and returns immediately.
It causes a bug that setting a hds-thresh value to 0 is not working.
Reproducer:
modprobe netdevsim
echo 1 > /sys/bus/netdevsim/new_device
ethtool -G eth0 hds-thresh 100
ethtool -G eth0 hds-thresh 0
ethtool -g eth0
#hds-thresh value should be 0, but it shows 100.
The tools/testing/selftests/drivers/net/hds.py can test it too with
applying a following patch for hds.py.
Fixes: 928459bbda ("net: ethtool: populate the default HDS params in the core")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250404122126.1555648-2-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When AC adapter is unplugged or plugged in EC wakes from HW sleep but
APU doesn't enter back into HW sleep.
The reason this happens is that, when the APU exits HW sleep, the power
rails controlled by the EC will power up the TCON. The TCON has a GPIO
that will be toggled at this time. The GPIO is not marked as a wakeup
source, but the GPIO controller still has an unserviced interrupt.
Unserviced interrupts will block entering HW sleep again. Clearing the
GPIO doesn't help as the TCON continues to assert it until it's been
initialized by i2c-hid.
Fixing this would require TCON F/W changes and it's already broken in
the wild on production hardware.
To avoid triggering this issue add a quirk to avoid letting EC wake
up system at all. The power button still works properly on this system.
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3929
Link: 95b93b2852
Co-developed-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250401133858.1892077-1-superm1@kernel.org
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While debugging kexec/hibernation hangs and crashes, it turned out that
the current implementation of e820__register_nosave_regions() suffers from
multiple serious issues:
- The end of last region is tracked by PFN, causing it to find holes
that aren't there if two consecutive subpage regions are present
- The nosave PFN ranges derived from holes are rounded out (instead of
rounded in) which makes it inconsistent with how explicitly reserved
regions are handled
Fix this by:
- Treating reserved regions as if they were holes, to ensure consistent
handling (rounding out nosave PFN ranges is more correct as the
kernel does not use partial pages)
- Tracking the end of the last RAM region by address instead of pages
to detect holes more precisely
These bugs appear to have been introduced about ~18 years ago with the very
first version of e820_mark_nosave_regions(), and its flawed assumptions were
carried forward uninterrupted through various waves of rewrites and renames.
[ mingo: Added Git archeology details, for kicks and giggles. ]
Fixes: e8eff5ac29 ("[PATCH] Make swsusp avoid memory holes and reserved memory regions on x86_64")
Reported-by: Roberto Ricci <io@r-ricci.it>
Tested-by: Roberto Ricci <io@r-ricci.it>
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250406-fix-e820-nosave-v3-1-f3787bc1ee1d@qtmlabs.xyz
Closes: https://lore.kernel.org/all/Z4WFjBVHpndct7br@desktop0a/
Xen disables ACPI for PV guests in DomU, which causes acpi_mps_check() to
return 1 when CONFIG_X86_MPPARSE is not set. As a result, the local APIC is
disabled and the guest is later limited to a single vCPU, despite being
configured with more.
This regression was introduced in version 6.9 in commit 7c0edad364
("x86/cpu/topology: Rework possible CPU management"), which added an
early check that limits CPUs to 1 if apic_is_disabled.
Update the acpi_mps_check() logic to return 0 early when running as a Xen
PV guest in DomU, preventing APIC from being disabled in this specific case
and restoring correct multi-vCPU behaviour.
Fixes: 7c0edad364 ("x86/cpu/topology: Rework possible CPU management")
Signed-off-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250407132445.6732-2-arkamar@atlas.cz
Scanning for namespaces can take some time, so if the target is
reconfigured while the scan is running we may miss a Attached Namespace
Attribute Changed AEN.
Check if the NVME_AER_NOTICE_NS_CHANGED bit is set once the scan has
finished, and requeue scanning to pick up any missed change.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Refill queue lock and other bits are only used from the allocation path
on the rx softirq side, but it shares the cache line with other fields
like ctx that are used also in the "syscall" path, which causes cache
bouncing when softirq runs on a different CPU.
Separate them into different cache lines. The first one now contains
constant fields used by both contextx, followed by a line responsible
for refill queue data.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6d1f598e27d623c07fc49d6baee13089a9b1216c.1743848241.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Waveform parameters are supposed to be rounded down to the next value
possible for the hardware. However when a requested value is too small,
.round_waveform_tohw() is supposed to pick the next bigger value and
return 1. Let pwm_set_waveform() behave in the same way.
This creates consistency between pwm_set_waveform_might_sleep() with
exact=false and pwm_round_waveform_might_sleep() +
pwm_set_waveform_might_sleep() with exact=true.
The PWM_DEBUG rounding check has to be adapted to only trigger if no
uprounding happend.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://lore.kernel.org/r/353dc6ae31be815e41fd3df89c257127ca0d1a09.1743844730.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
PVH dom0 re-uses logic from PV dom0, in which RAM ranges not assigned to
dom0 are re-used as scratch memory to map foreign and grant pages. Such
logic relies on reporting those unpopulated ranges as RAM to Linux, and
mark them as reserved. This way Linux creates the underlying page
structures required for metadata management.
Such approach works fine on PV because the initial balloon target is
calculated using specific Xen data, that doesn't take into account the
memory type changes described above. However on HVM and PVH the initial
balloon target is calculated using get_num_physpages(), and that function
does take into account the unpopulated RAM regions used as scratch space
for remote domain mappings.
This leads to PVH dom0 having an incorrect initial balloon target, which
causes malfunction (excessive memory freeing) of the balloon driver if the
dom0 memory target is later adjusted from the toolstack.
Fix this by using xen_released_pages to account for any pages that are part
of the memory map, but are already unpopulated when the balloon driver is
initialized. This accounts for any regions used for scratch remote
mappings. Note on x86 xen_released_pages definition is moved to
enlighten.c so it's uniformly available for all Xen-enabled builds.
Take the opportunity to unify PV with PVH/HVM guests regarding the usage of
get_num_physpages(), as that avoids having to add different logic for PV vs
PVH in both balloon_add_regions() and arch_xen_unpopulated_init().
Much like a6aa4eb994, the code in this changeset should have been part of
38620fc4e8.
Fixes: a6aa4eb994 ('xen/x86: add extra pages to unpopulated-alloc if available')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250407082838.65495-1-roger.pau@citrix.com>
__VA_OPT__ is a macro that is useful when some arguments can be present
or not to entirely skip some part of a definition. Unfortunately, it
is a too recent addition that some of the still supported old GCC
versions do not know about, and is anyway not part of C11 that is the
version used in the kernel.
Find a trick to remove this macro, typically '__VA_ARGS__ + 0' is a
workaround used in netlink.h which works very well here, as we either
expect:
- 0
- A positive value
- No value, which means the field should be 0.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503181330.YcDXGy7F-lkp@intel.com/
Fixes: 7ce0d16d58 ("mtd: spinand: Add an optional frequency to read from cache macros")
Cc: stable@vger.kernel.org
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
In r852_ready(), the dev get from r852_get_dev() need to be checked.
An unstable device should not be ready. A proper implementation can
be found in r852_read_byte(). Add a status check and return 0 when it is
unstable.
Fixes: 50a487e771 ("mtd: rawnand: Pass a nand_chip object to chip->dev_ready()")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
In INFTL_findwriteunit(), the return value of inftl_read_oob()
need to be checked. A proper implementation can be
found in INFTL_deleteblock(). The status will be set as
SECTOR_IGNORE to break from the while-loop correctly
if the inftl_read_oob() fails.
Fixes: 8593fbc68b ("[MTD] Rework the out of band handling completely")
Cc: stable@vger.kernel.org # v2.6+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
If CONFIG_SPI_QPIC_SNAND=m, but CONFIG_MTD_NAND_QCOM=n:
ERROR: modpost: "qcom_nandc_unalloc" [drivers/spi/spi-qpic-snand.ko] undefined!
...
Fix this by dropping the explicit test for a built-in
CONFIG_SPI_QPIC_SNAND completely. Kbuild handles multiple and mixed
obj-y/obj-m rules for the same object file fine.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503280759.XhwLcV7m-lkp@intel.com/
Fixes: 7304d19090 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Modules without a description now cause a warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/xen/xenbus/xenbus_probe_frontend.o
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250328113302.2632353-1-arnd@kernel.org>
When mounting the same share twice, once with the "linux" mount parameter
(or equivalently "posix") and then once without (or e.g. with "nolinux"),
we were incorrectly reusing the same tree connection for both mounts.
This meant that the first mount of the share on the client, would
cause subsequent mounts of that same share on the same client to
ignore that mount parm ("linux" vs. "nolinux") and incorrectly reuse
the same tcon.
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix regression in mounts to e.g. onedrive shares.
Generally, reparse points are processed by the SMB server during the
SMB OPEN request, but there are few reparse points which do not have
OPEN-like meaning for the SMB server and has to be processed by the SMB
client. Those are symlinks and special files (fifo, socket, block, char).
For Linux SMB client, it is required to process also name surrogate reparse
points as they represent another entity on the SMB server system. Linux
client will mark them as separate mount points. Examples of name surrogate
reparse points are NTFS junction points (e.g. created by the "mklink" tool
on Windows servers).
So after processing the name surrogate reparse points, clear the
-EOPNOTSUPP error code returned from the parse_reparse_point() to let SMB
server to process reparse points.
And remove printing misleading error message "unhandled reparse tag:" as
reparse points are handled by SMB server and hence unhandled fact is normal
operation.
Fixes: cad3fc0a4c ("cifs: Throw -EOPNOTSUPP error on unsupported reparse point type from parse_reparse_point()")
Fixes: b587fd1286 ("cifs: Treat unhandled directory name surrogate reparse points as mount directory nodes")
Cc: stable@vger.kernel.org
Reported-by: Junwen Sun <sunjw8888@gmail.com>
Tested-by: Junwen Sun <sunjw8888@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fixes "task out to lunch" warnings during recovery on large machines
with lots of dirty data in the journal.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
As with the other algorithms, bcachefs does not access xxhash through
the crypto API. So there is no need to use a module softdep to ensure
that it is loaded.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Just use the ChaCha20 and Poly1305 libraries instead of the clunky
crypto API. This is much simpler. It is also slightly faster, since
the libraries provide more direct access to the same
architecture-optimized ChaCha20 and Poly1305 code.
I've tested that existing encrypted bcachefs filesystems can be continue
to be accessed with this patch applied.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Commit 3ba0240a87 fixed a bug in the read retry path in __bch2_read(),
and changed bchfs_read() to match - to avoid a landmine if
bch2_read_extent() ever starts returning transaction restarts.
But that was incorrect, because bchfs_read() doesn't use a separate
stack allocated bvec_iter, it uses the one in the rbio being submitted.
Add a comment explaining the issue, and revert the buggy change.
Fixes: 3ba0240a87 ("bcachefs: Fix silent short reads in data read retry path")
Reported-by: syzbot+2deb10b8dc9aae6fab67@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Replace u64 with __le64 to match the expected parameter type. Ensure consistency both in function calls and within the function itself.
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Move the get_ctx(child_ctx) call and the child_event->ctx assignment to
occur immediately after the child event is allocated. Ensure that
child_event->ctx is non-NULL before any subsequent error path within
inherit_event calls free_event(), satisfying the assumptions of the
cleanup code.
Details:
There's no clear Fixes tag, because this bug is a side-effect of
multiple interacting commits over time (up to 15 years old), not
a single regression.
The code initially incremented refcount then assigned context
immediately after the child_event was created. Later, an early
validity check for child_event was added before the
refcount/assignment. Even later, a WARN_ON_ONCE() cleanup check was
added, assuming event->ctx is valid if the pmu_ctx is valid.
The problem is that the WARN_ON_ONCE() could trigger after the initial
check passed but before child_event->ctx was assigned, violating its
precondition. The solution is to assign child_event->ctx right after
its initial validation. This ensures the context exists for any
subsequent checks or cleanup routines, resolving the WARN_ON_ONCE().
To resolve it, defer the refcount update and child_event->ctx assignment
directly after child_event->pmu_ctx is set but before checking if the
parent event is orphaned. The cleanup routine depends on
event->pmu_ctx being non-NULL before it verifies event->ctx is
non-NULL. This also maintains the author's original intent of passing
in child_ctx to find_get_pmu_context before its refcount/assignment.
[ mingo: Expanded the changelog from another email by Gabriel Shahrouzi. ]
Reported-by: syzbot+ff3aa851d46ab82953a3@syzkaller.appspotmail.com
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20250405203036.582721-1-gshahrouzi@gmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ff3aa851d46ab82953a3
Atomic instructions such as 'ldset' in the guest have been observed to
cause an EL1 data abort with FSC 0x35 (IMPLEMENTATION DEFINED fault
(Unsupported Exclusive or Atomic access)) on Neoverse-N3.
Per DDI0487L.a B2.2.6, atomic instructions are only architecturally
guaranteed for Inner/Outer Shareable Normal Write-Back memory. For
anything else the behavior is IMPLEMENTATION DEFINED and can lose
atomicity, or, in this case, generate an abort.
It would appear that selftests sets up the stage-1 mappings as Non
Shareable, leading to the observed abort. Explicitly set the
Shareability field to Inner Shareable for non-LPA2 page tables. Note
that for the LPA2 page table format, translations for cacheable memory
inherit the shareability attribute of the PTW, i.e. TCR_ELx.SH{0,1}.
Suggested-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20250405001042.1470552-3-rananta@google.com
[oliver: Rephrase changelog]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The kvm selftest library for arm64 currently configures the hardware
fields, such as shift and mask in the page-table entries and registers,
directly with numbers. While it add comments at places, it's better to
rewrite them with appropriate macros to improve the readability and
reduce the risk of errors. Hence, introduce macros to define the
hardware fields and use them in the arm64 processor library.
Most of the definitions are primary copied from the Linux's header,
arch/arm64/include/asm/pgtable-hwdef.h.
No functional change intended.
Suggested-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20250405001042.1470552-2-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Currently, the res_spin_lock test is too chatty as it constantly prints
the test_run results for each iteration in each thread, so in case
verbose output is requested or things go wrong, it will flood the logs
of CI and other systems with repeated messages that offer no valuable
insight. Reduce this by doing assertions when the condition actually
flips, and proceed to break out and exit the threads. We still assert
to mark the test as failed and print the expected and reported values.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250403220841.66654-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use a separate subclass when acquiring KVM's per-CPU posted interrupts
wakeup lock in the scheduled out path, i.e. when adding a vCPU on the list
of vCPUs to wake, to workaround a false positive deadlock.
Chain exists of:
&p->pi_lock --> &rq->__lock --> &per_cpu(wakeup_vcpus_on_cpu_lock, cpu)
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&per_cpu(wakeup_vcpus_on_cpu_lock, cpu));
lock(&rq->__lock);
lock(&per_cpu(wakeup_vcpus_on_cpu_lock, cpu));
lock(&p->pi_lock);
*** DEADLOCK ***
In the wakeup handler, the callchain is *always*:
sysvec_kvm_posted_intr_wakeup_ipi()
|
--> pi_wakeup_handler()
|
--> kvm_vcpu_wake_up()
|
--> try_to_wake_up(),
and the lock order is:
&per_cpu(wakeup_vcpus_on_cpu_lock, cpu) --> &p->pi_lock.
For the schedule out path, the callchain is always (for all intents and
purposes; if the kernel is preemptible, kvm_sched_out() can be called from
something other than schedule(), but the beginning of the callchain will
be the same point in vcpu_block()):
vcpu_block()
|
--> schedule()
|
--> kvm_sched_out()
|
--> vmx_vcpu_put()
|
--> vmx_vcpu_pi_put()
|
--> pi_enable_wakeup_handler()
and the lock order is:
&rq->__lock --> &per_cpu(wakeup_vcpus_on_cpu_lock, cpu)
I.e. lockdep sees AB+BC ordering for schedule out, and CA ordering for
wakeup, and complains about the A=>C versus C=>A inversion. In practice,
deadlock can't occur between schedule out and the wakeup handler as they
are mutually exclusive. The entirely of the schedule out code that runs
with the problematic scheduler locks held, does so with IRQs disabled,
i.e. can't run concurrently with the wakeup handler.
Use a subclass instead disabling lockdep entirely, and tell lockdep that
both subclasses are being acquired when loading a vCPU, as the sched_out
and sched_in paths are NOT mutually exclusive, e.g.
CPU 0 CPU 1
--------------- ---------------
vCPU0 sched_out
vCPU1 sched_in
vCPU1 sched_out vCPU 0 sched_in
where vCPU0's sched_in may race with vCPU1's sched_out, on CPU 0's wakeup
list+lock.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-ID: <20250401154727.835231-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Assert that IRQs are already disabled when putting a vCPU on a CPU's PI
wakeup list, as opposed to saving/disabling+restoring IRQs. KVM relies on
IRQs being disabled until the vCPU task is fully scheduled out, i.e. until
the scheduler has dropped all of its per-CPU locks (e.g. for the runqueue),
as attempting to wake the task while it's being scheduled out could lead
to deadlock.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20250401154727.835231-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert HAVE_KVM_IRQ_BYPASS into a tristate so that selecting
IRQ_BYPASS_MANAGER follows KVM={m,y}, i.e. doesn't force irqbypass.ko to
be built-in.
Note, PPC allows building KVM as a module, but selects HAVE_KVM_IRQ_BYPASS
from a boolean Kconfig, i.e. KVM PPC unnecessarily forces irqbpass.ko to
be built-in. But that flaw is a longstanding PPC specific issue.
Fixes: 61df71ee99 ("kvm: move "select IRQ_BYPASS_MANAGER" to common code")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250315024623.2363994-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wrap the TDP MMU page counter in CONFIG_KVM_PROVE_MMU so that the sanity
check is omitted from production builds, and more importantly to remove
the atomic accesses to account pages. A one-off memory leak in production
is relatively uninteresting, and a WARN_ON won't help mitigate a systemic
issue; it's as much about helping triage memory leaks as it is about
detecting them in the first place, and doesn't magically stop the leaks.
I.e. production environments will be quite sad if a severe KVM bug escapes,
regardless of whether or not KVM WARNs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250315023448.2358456-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a "-l <latency>" param to the rseq test so that the user can override
/dev/cpu_dma_latency, as described by the test's suggested workaround for
not being able to complete enough migrations.
cpu_dma_latency is not a normal file, even as far as procfs files go.
Writes to cpu_dma_latency only persist so long as the file is open, e.g.
so that the kernel automatically reverts back to a power-optimized state
once the sensitive workload completes. Provide the necessary functionality
instead of effectively forcing the user to write a non-obvious wrapper.
Cc: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Cc: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250401142238.819487-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acquire a lock on kvm->srcu when userspace is getting MP state to handle a
rather extreme edge case where "accepting" APIC events, i.e. processing
pending INIT or SIPI, can trigger accesses to guest memory. If the vCPU
is in L2 with INIT *and* a TRIPLE_FAULT request pending, then getting MP
state will trigger a nested VM-Exit by way of ->check_nested_events(), and
emuating the nested VM-Exit can access guest memory.
The splat was originally hit by syzkaller on a Google-internal kernel, and
reproduced on an upstream kernel by hacking the triple_fault_event_test
selftest to stuff a pending INIT, store an MSR on VM-Exit (to generate a
memory access on VMX), and do vcpu_mp_state_get() to trigger the scenario.
=============================
WARNING: suspicious RCU usage
6.14.0-rc3-b112d356288b-vmx/pi_lockdep_false_pos-lock #3 Not tainted
-----------------------------
include/linux/kvm_host.h:1058 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by triple_fault_ev/1256:
#0: ffff88810df5a330 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x8b/0x9a0 [kvm]
stack backtrace:
CPU: 11 UID: 1000 PID: 1256 Comm: triple_fault_ev Not tainted 6.14.0-rc3-b112d356288b-vmx #3
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0x90
lockdep_rcu_suspicious+0x144/0x190
kvm_vcpu_gfn_to_memslot+0x156/0x180 [kvm]
kvm_vcpu_read_guest+0x3e/0x90 [kvm]
read_and_check_msr_entry+0x2e/0x180 [kvm_intel]
__nested_vmx_vmexit+0x550/0xde0 [kvm_intel]
kvm_check_nested_events+0x1b/0x30 [kvm]
kvm_apic_accept_events+0x33/0x100 [kvm]
kvm_arch_vcpu_ioctl_get_mpstate+0x30/0x1d0 [kvm]
kvm_vcpu_ioctl+0x33e/0x9a0 [kvm]
__x64_sys_ioctl+0x8b/0xb0
do_syscall_64+0x6c/0x170
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250401150504.829812-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Categorize the capabilities correctly. Section 6 is for enabled vCPU
capabilities; section 7 is for enabled VM capabilities; section 8 is
for informational ones.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TSC_DEADLINE is now advertised unconditionally by KVM_GET_SUPPORTED_CPUID,
since commit 9be4ec35d6 ("KVM: x86: Advertise TSC_DEADLINE_TIMER in
KVM_GET_SUPPORTED_CPUID", 2024-12-18). Adjust the documentation to
reflect the new behavior.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250331150550.510320-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several tests cover infrastructure from virt/kvm/ and userspace APIs that have
only minimal requirements from architecture-specific code. As such, they are
available on all architectures that have libkvm support, and this presumably
will apply also in the future (for example if loongarch gets selftests support).
Put them in a separate variable and list them only once.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250401141327.785520-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Run each testcase in a separate VMs to cover more possibilities;
move WRMSR close to MONITOR/MWAIT to test updating CPUID bits
while in the VM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There were several issues in the function rcar_pwm_set_counter():
- The u64 values period_ns and duty_ns were cast to int on function
call which might loose bits on 32 bit architectures.
Fix: Make parameters to rcar_pwm_set_counter() u64
- The algorithm divided by the result of a division which looses
precision.
Fix: Make use of mul_u64_u64_div_u64()
- The calculated values were just masked to fit the respective register
fields which again might loose bits.
Fix: Explicitly check for overlow
Implement the respective fixes.
A side effect of fixing the 2nd issue is that there is no division by 0
if clk_get_rate() returns 0.
Fixes: ed6c1476bf ("pwm: Add support for R-Car PWM Timer")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/ab3dac794b2216cc1cc56d65c93dd164f8bd461b.1743501688.git.u.kleine-koenig@baylibre.com
[ukleinek: Added an explicit #include <linux/bitfield.h> to please the
0day build bot]
Link: https://lore.kernel.org/oe-kbuild-all/202504031354.VJtxScP5-lkp@intel.com/
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Don't re-walk the page tables if an SEA occurred during the faulting
page table walk to avoid taking a fatal exception in the hyp.
Additionally, check that FAR_EL2 is valid for SEAs not taken on PTW
as the architecture doesn't guarantee it contains the fault VA.
Finally, fix up the rest of the abort path by checking for SEAs early
and bugging the VM if we get further along with an UNKNOWN fault IPA.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250402201725.2963645-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
KVM's logic for deciding when HPFAR_EL2 is UNKNOWN doesn't align with
the architecture. Most notably, KVM assumes HPFAR_EL2 contains the
faulting IPA even in the case of an SEA.
Align the logic with the architecture rather than attempting to
paraphrase it. Additionally, take the opportunity to improve the
language around ARM erratum #834220 such that it actually describes the
bug.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250402201725.2963645-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Commit ac91052f0a ("tracing: tprobe-events: Fix leakage of module
refcount") moved try_module_get() from __find_tracepoint_module_cb()
to find_tracepoint() caller, but that introduced a possible UAF
because the module can be unloaded before try_module_get(). In this
case, the module object should be freed too. Thus, try_module_get()
does not only fail but may access to the freed object.
To avoid that, try_module_get() in __find_tracepoint_module_cb()
again.
Link: https://lore.kernel.org/all/174342990779.781946.9138388479067729366.stgit@devnote2/
Fixes: ac91052f0a ("tracing: tprobe-events: Fix leakage of module refcount")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
There is a possible race between removing a cgroup diectory that is
a partition root and the creation of a new partition. The partition
to be removed can be dying but still online, it doesn't not currently
participate in checking for exclusive CPUs conflict, but the exclusive
CPUs are still there in subpartitions_cpus and isolated_cpus. These
two cpumasks are global states that affect the operation of cpuset
partitions. The exclusive CPUs in dying cpusets will only be removed
when cpuset_css_offline() function is called after an RCU delay.
As a result, it is possible that a new partition can be created with
exclusive CPUs that overlap with those of a dying one. When that dying
partition is finally offlined, it removes those overlapping exclusive
CPUs from subpartitions_cpus and maybe isolated_cpus resulting in an
incorrect CPU configuration.
This bug was found when a warning was triggered in
remote_partition_disable() during testing because the subpartitions_cpus
mask was empty.
One possible way to fix this is to iterate the dying cpusets as well and
avoid using the exclusive CPUs in those dying cpusets. However, this
can still cause random partition creation failures or other anomalies
due to racing. A better way to fix this race is to reset the partition
state at the moment when a cpuset is being killed.
Introduce a new css_killed() CSS function pointer and call it, if
defined, before setting CSS_DYING flag in kill_css(). Also update the
css_is_dying() helper to use the CSS_DYING flag introduced by commit
33c35aa481 ("cgroup: Prevent kill_css() from being called more than
once") for proper synchronization.
Add a new cpuset_css_killed() function to reset the partition state of
a valid partition root if it is being killed.
Fixes: ee8dde0cd2 ("cpuset: Add new v2 cpuset.sched.partition flag")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The current cgroup directory layout for running the partition state
transition tests is mainly suitable for testing local partitions as
well as with a mix of local and remote partitions. It is not that
suitable for doing extensive remote partition and nested remote/local
partition testing.
Add a new set of remote partition tests REMOTE_TEST_MATRIX with another
cgroup directory structure more tailored for remote partition testing
to provide better code coverage.
Also add a few new test cases as well as adjusting existig ones for
the original TEST_MATRIX.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cleaning up the test_cpuset_prs.sh script and restructure some of the
functions so that a new test matrix with a different cgroup directory
structure can be added in the next patch.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, ',' is used as the cgroup separator of the expected effective
CPUs and partition root states in the test matrix. However, ',' can be
part of the output of the cpuset.cpus*.effective and cpuset.cpus.isolated
files. Change the separator to '|' so that ',' can appear as part of
the expected values.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The goto statement in sched_partition_write() is not needed. Remove
it and rename sched_partition_write()/sched_partition_show() to
cpuset_partition_write()/cpuset_partition_show().
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Rename partition_xcpus_newstate() to isolated_cpus_update(),
update_partition_exclusive() to update_partition_exclusive_flag() and
the new_xcpus_state variable to isolcpus_updated to make their meanings
more explicit. Also add some comments to further clarify the code.
No functional change is expected.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, we don't allow the creation of a remote partition underneath
another local or remote partition. However, it is currently possible to
create a new local partition with an existing remote partition underneath
it if top_cpuset is the parent. However, the current cpuset code does
not set the effective exclusive CPUs correctly to account for those
that are taken by the remote partition.
Changing the code to properly account for those remote partition CPUs
under all possible circumstances can be complex. It is much easier to
not allow such a configuration which is not that useful. So forbid
that by making sure that exclusive_cpus mask doesn't overlap with
subpartitions_cpus and invalidate the partition if that happens.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, changes in exclusive CPUs are being handled in
remote_partition_check() by disabling conflicting remote partitions.
However, that may lead to results unexpected by the users. Fix
this problem by removing remote_partition_check() and making
update_cpumasks_hier() handle changes in descendant remote partitions
properly.
The compute_effective_exclusive_cpumask() function is enhanced to check
the exclusive_cpus and effective_xcpus from siblings and excluded them
in its effective exclusive CPUs computation and return a value to show if
there is any sibling conflicts. This is somewhat like the cpu_exclusive
flag check in validate_change(). This is the initial step to enable us
to retire the use of cpu_exclusive flag in cgroup v2 in the future.
One of the tests in the TEST_MATRIX of the test_cpuset_prs.sh
script has to be updated due to changes in the way a child remote
partition root is being handled (updated instead of invalidation)
in update_cpumasks_hier().
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When remote_partition_disable() is called to disable a remote partition,
it always sets the partition to an invalid partition state. It should
only do so if an error code (prs_err) has been set. Correct that and
add proper error code in places where remote_partition_disable() is
called due to error.
Fixes: 181c8e091a ("cgroup/cpuset: Introduce remote partition")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Before commit f0af1bfc27 ("cgroup/cpuset: Relax constraints to
partition & cpus changes"), a cpuset partition cannot be enabled if not
all the requested CPUs can be granted from the parent cpuset. After
that commit, a cpuset partition can be created even if the requested
exclusive CPUs contain CPUs not allowed its parent. The delmask
containing exclusive CPUs to be removed from its parent wasn't
adjusted accordingly.
That is not a problem until the introduction of a new isolated_cpus
mask in commit 11e5f407b6 ("cgroup/cpuset: Keep track of CPUs in
isolated partitions") as the CPUs in the delmask may be added directly
into isolated_cpus.
As a result, isolated_cpus may incorrectly contain CPUs that are not
isolated leading to incorrect data reporting. Fix this by adjusting
the delmask to reflect the actual exclusive CPUs for the creation of
the partition.
Fixes: 11e5f407b6 ("cgroup/cpuset: Keep track of CPUs in isolated partitions")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We need to save the reservation object pointer associated with the
imported dmabuf in the newly created GEM object to allow
drm_gem_plane_helper_prepare_fb() to extract the exclusive fence
from it and attach it to the plane state during prepare phase.
This is needed to ensure that drm_atomic_helper_wait_for_fences()
correctly waits for the relevant fences (move, etc) associated with
the reservation object, thereby implementing proper synchronization.
Otherwise, artifacts or slight flickering can be seen when apps
are dragged across the screen when running Gnome (Wayland). This
problem is mostly seen with dGPUs in the case where the FBs are
allocated in VRAM but need to be migrated to System RAM as they
are shared with virtio-gpu.
Fixes: ca77f27a26 ("drm/virtio: Import prime buffers from other devices as guest blobs")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
[dmitry.osipenko@collabora.com: Moved assignment before object_init()]
Link: https://patchwork.freedesktop.org/patch/msgid/20250325201021.1315080-1-vivek.kasireddy@intel.com
For paired jobs, have the fragment job take a reference on the
geometry job, so that the geometry job cannot be freed until
the fragment job has finished with it.
The geometry job structure is accessed when the fragment job is being
prepared by the GPU scheduler. Taking the reference prevents the
geometry job being freed until the fragment job no longer requires it.
Fixes a use after free bug detected by KASAN:
[ 124.256386] BUG: KASAN: slab-use-after-free in pvr_queue_prepare_job+0x108/0x868 [powervr]
[ 124.264893] Read of size 1 at addr ffff0000084cb960 by task kworker/u16:4/63
Cc: stable@vger.kernel.org
Fixes: eaf01ee5ba ("drm/imagination: Implement job submission and scheduling")
Signed-off-by: Brendan King <brendan.king@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://lore.kernel.org/r/20250318-ddkopsrc-1337-use-after-free-in-pvr_queue_prepare_job-v1-1-80fb30d044a6@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
predictors to be used by near RET instructions when the RSB is
empty. When eIBRS is enabled, the predicted targets of these
alternate predictors are restricted to those belonging to the
indirect branch predictor entries of the current prediction domain.
[#intel-eibrs-rrsba]_
When a CPU with RRSBA is vulnerable to Branch History Injection
[#bhi-paper]_[#intel-bhi]_, an RSB underflow could be used for an
intra-mode BTI attack. This is mitigated by clearing the BHB on
kernel entry.
However if the kernel uses retpolines instead of eIBRS, it needs to
disable RRSBA:
* "Where software is using retpoline as a mitigation for BHI or
intra-mode BTI, and the processor both enumerates RRSBA and
enumerates RRSBA_DIS controls, it should disable this behavior."
[#intel-retpoline-rrsba]_
----
References
==========
..[#spectre-rsb]`Spectre Returns! Speculation Attacks using the Return Stack Buffer <https://arxiv.org/pdf/1807.07940.pdf>`_
..[#intel-rsb-filling] "Empty RSB Mitigation on Skylake-generation" in `Retpoline: A Branch Target Injection Mitigation <https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/retpoline-branch-target-injection-mitigation.html#inpage-nav-5-1>`_
..[#amd-rsb-filling] "Mitigation V2-3" in `Software Techniques for Managing Speculation <https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/programmer-references/software-techniques-for-managing-speculation.pdf>`_
..[#cond-ibpb] Whether IBPB is written depends on whether the prev and/or next task is protected from Spectre attacks. It typically requires opting in per task or system-wide. For more details see the documentation for the ``spectre_v2_user`` cmdline option in Documentation/admin-guide/kernel-parameters.txt.
..[#amd-sbpb] IBPB without flushing of branch type predictions. Only exists for AMD.
..[#amd-ibpb-rsb] "Function 8000_0008h -- Processor Capacity Parameters and Extended Feature Identification" in `AMD64 Architecture Programmer's Manual Volume 3: General-Purpose and System Instructions <https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/programmer-references/24594.pdf>`_. SBPB behaves the same way according to `this email <https://lore.kernel.org/5175b163a3736ca5fd01cedf406735636c99a>`_.
..[#amd-smep-rsb] "Existing Mitigations" in `Technical Guidance for Mitigating Branch Type Confusion <https://www.amd.com/content/dam/amd/en/documents/resources/technical-guidance-for-mitigating-branch-type-confusion.pdf>`_
..[#intel-smep-rsb] "Enhanced IBRS" in `Indirect Branch Restricted Speculation <https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/indirect-branch-restricted-speculation.html>`_
..[#amd-eibrs-vmexit] "Extended Feature Enable Register (EFER)" in `AMD64 Architecture Programmer's Manual Volume 2: System Programming <https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/programmer-references/24593.pdf>`_
..[#intel-eibrs-vmexit] "Enhanced IBRS" in `Indirect Branch Restricted Speculation <https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/indirect-branch-restricted-speculation.html>`_
..[#retbleed-paper]`RETBleed: Arbitrary Speculative Code Execution with Return Instruction <https://comsec.ethz.ch/wp-content/files/retbleed_sec22.pdf>`_
..[#amd-btc]`Technical Guidance for Mitigating Branch Type Confusion <https://www.amd.com/content/dam/amd/en/documents/resources/technical-guidance-for-mitigating-branch-type-confusion.pdf>`_
..[#inception-paper]`Inception: Exposing New Attack Surfaces with Training in Transient Execution <https://comsec.ethz.ch/wp-content/files/inception_sec23.pdf>`_
..[#intel-eibrs-rrsba] "Guidance for RSBU" in `Return Stack Buffer Underflow / Return Stack Buffer Underflow / CVE-2022-29901, CVE-2022-28693 / INTEL-SA-00702 <https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/advisory-guidance/return-stack-buffer-underflow.html>`_
..[#bhi-paper]`Branch History Injection: On the Effectiveness of Hardware Mitigations Against Cross-Privilege Spectre-v2 Attacks <http://download.vusec.net/papers/bhi-spectre-bhb_sec22.pdf>`_
..[#intel-bhi]`Branch History Injection and Intra-mode Branch Target Injection / CVE-2022-0001, CVE-2022-0002 / INTEL-SA-00598 <https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html>`_
..[#intel-retpoline-rrsba] "Retpoline" in `Branch History Injection and Intra-mode Branch Target Injection / CVE-2022-0001, CVE-2022-0002 / INTEL-SA-00598 <https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html>`_
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
