Linux 4.1-rc3

Pull drm fixes from Dave Airlie:
 "I really need to get back to sending these on my Friday, instead of my
  Monday morning, but nothing too amazing in here: a few amdkfd fixes, a
  few radeon fixes, i915 fixes, one tegra fix and one core fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm: Zero out invalid vblank timestamp in drm_update_vblank_count.
  drm/tegra: Don't use vblank_disable_immediate on incapable driver.
  drm/radeon: stop trying to suspend UVD sessions
  drm/radeon: more strictly validate the UVD codec
  drm/radeon: make UVD handle checking more strict
  drm/radeon: make VCE handle check more strict
  drm/radeon: fix userptr lockup
  drm/radeon: fix userptr BO unpin bug v3
  drm/amdkfd: Initialize sdma vm when creating sdma queue
  drm/amdkfd: Don't report local memory size
  drm/amdkfd: allow unregister process with queues
  drm/i915: Drop PIPE-A quirk for 945GSE HP Mini
  drm/i915: Sink rate read should be saved in deca-kHz
  drm/i915/dp: there is no audio on port A
  drm/i915: Add missing MacBook Pro models with dual channel LVDS
  drm/i915: Assume dual channel LVDS if pixel clock necessitates it
  drm/radeon: don't setup audio on asics that don't support it
  drm/radeon: disable semaphores for UVD V1 (v2)

CREDITS

@@ -3709,6 +3709,13 @@ N: Dirk Verworner
 D: Co-author of German book ``Linux-Kernel-Programmierung''
 D: Co-founder of Berlin Linux User Group
 
+N: Andrew Victor
+E: linux@maxim.org.za
+W: http://maxim.org.za/at91_26.html
+D: First maintainer of Atmel ARM-based SoC, aka AT91
+D: Introduced support for at91rm9200, the first chip of AT91 family
+S: South Africa
+
 N: Riku Voipio
 E: riku.voipio@iki.fi
 D: Author of PCA9532 LED and Fintek f75375s hwmon driver

Documentation/IPMI.txt

@@ -505,7 +505,10 @@ at module load time (for a module) with:
 
 The addresses are normal I2C addresses.  The adapter is the string
 name of the adapter, as shown in /sys/class/i2c-adapter/i2c-<n>/name.
-It is *NOT* i2c-<n> itself.
+It is *NOT* i2c-<n> itself.  Also, the comparison is done ignoring
+spaces, so if the name is "This is an I2C chip" you can say
+adapter_name=ThisisanI2cchip.  This is because it's hard to pass in
+spaces in kernel parameters.
 
 The debug flags are bit flags for each BMC found, they are:
 IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8

Documentation/acpi/enumeration.txt

@@ -253,7 +253,7 @@ input driver:
 GPIO support
 ~~~~~~~~~~~~
 ACPI 5 introduced two new resources to describe GPIO connections: GpioIo
-and GpioInt. These resources are used be used to pass GPIO numbers used by
+and GpioInt. These resources can be used to pass GPIO numbers used by
 the device to the driver. ACPI 5.1 extended this with _DSD (Device
 Specific Data) which made it possible to name the GPIOs among other things.
 

Documentation/acpi/gpio-properties.txt

@@ -1,9 +1,9 @@
 _DSD Device Properties Related to GPIO
 --------------------------------------
 
-With the release of ACPI 5.1 and the _DSD configuration objecte names
-can finally be given to GPIOs (and other things as well) returned by
-_CRS.  Previously, we were only able to use an integer index to find
+With the release of ACPI 5.1, the _DSD configuration object finally
+allows names to be given to GPIOs (and other things as well) returned
+by _CRS.  Previously, we were only able to use an integer index to find
 the corresponding GPIO, which is pretty error prone (it depends on
 the _CRS output ordering, for example).
 

Documentation/devicetree/bindings/arm/omap/l3-noc.txt

@@ -6,6 +6,7 @@ provided by Arteris.
 Required properties:
 - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
                Should be "ti,omap4-l3-noc" for OMAP4 family
+               Should be "ti,omap5-l3-noc" for OMAP5 family
 	       Should be "ti,dra7-l3-noc" for DRA7 family
                Should be "ti,am4372-l3-noc" for AM43 family
 - reg:	Contains L3 register address range for each noc domain.

Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt

@@ -38,7 +38,7 @@ dma_apbx: dma-apbx@80024000 {
 		      80 81 68 69
 		      70 71 72 73
 		      74 75 76 77>;
-	interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+	interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 			  "saif0", "saif1", "i2c0", "i2c1",
 			  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 			  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";

Documentation/devicetree/bindings/rtc/abracon,abx80x.txt

@@ -0,0 +1,30 @@
+Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
+ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
+is the superset of ab180x.
+
+Required properties:
+
+ - "compatible": should one of:
+        "abracon,abx80x"
+        "abracon,ab0801"
+        "abracon,ab0803"
+        "abracon,ab0804"
+        "abracon,ab0805"
+        "abracon,ab1801"
+        "abracon,ab1803"
+        "abracon,ab1804"
+        "abracon,ab1805"
+	Using "abracon,abx80x" will enable chip autodetection.
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+The abx804 and abx805 have a trickle charger that is able to charge the
+connected battery or supercap. Both the following properties have to be defined
+and valid to enable charging:
+
+ - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
+ - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
+                          resistor, the other values are in ohm.

Documentation/kasan.txt

@@ -9,7 +9,9 @@ a fast and comprehensive solution for finding use-after-free and out-of-bounds
 bugs.
 
 KASan uses compile-time instrumentation for checking every memory access,
-therefore you will need a certain version of GCC > 4.9.2
+therefore you will need a gcc version of 4.9.2 or later. KASan could detect out
+of bounds accesses to stack or global variables, but only if gcc 5.0 or later was
+used to built the kernel.
 
 Currently KASan is supported only for x86_64 architecture and requires that the
 kernel be built with the SLUB allocator.
@@ -23,8 +25,8 @@ To enable KASAN configure kernel with:
 
 and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline/inline
 is compiler instrumentation types. The former produces smaller binary the
-latter is 1.1 - 2 times faster. Inline instrumentation requires GCC 5.0 or
-latter.
+latter is 1.1 - 2 times faster. Inline instrumentation requires a gcc version
+of 5.0 or later.
 
 Currently KASAN works only with the SLUB memory allocator.
 For better bug detection and nicer report, enable CONFIG_STACKTRACE and put

Documentation/kernel-parameters.txt

@@ -3787,6 +3787,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 					READ_CAPACITY_16 command);
 				f = NO_REPORT_OPCODES (don't use report opcodes
 					command, uas only);
+				g = MAX_SECTORS_240 (don't transfer more than
+					240 sectors at a time, uas only);
 				h = CAPACITY_HEURISTICS (decrease the
 					reported device capacity by one
 					sector if the number is odd);

Documentation/module-signing.txt

@@ -119,9 +119,9 @@ Most notably, in the x509.genkey file, the req_distinguished_name section
 should be altered from the default:
 
 	[ req_distinguished_name ]
-	O = Magrathea
-	CN = Glacier signing key
-	emailAddress = slartibartfast@magrathea.h2g2
+	#O = Unspecified company
+	CN = Build time autogenerated kernel key
+	#emailAddress = unspecified.user@unspecified.company
 
 The generated RSA key size can also be set with:
 

Documentation/networking/mpls-sysctl.txt

@@ -18,3 +18,12 @@ platform_labels - INTEGER
 
 	Possible values: 0 - 1048575
 	Default: 0
+
+conf/<interface>/input - BOOL
+	Control whether packets can be input on this interface.
+
+	If disabled, packets will be discarded without further
+	processing.
+
+	0 - disabled (default)
+	not 0 - enabled

Documentation/networking/scaling.txt

@@ -282,7 +282,7 @@ following is true:
 
 - The current CPU's queue head counter >= the recorded tail counter
   value in rps_dev_flow[i]
-- The current CPU is unset (equal to RPS_NO_CPU)
+- The current CPU is unset (>= nr_cpu_ids)
 - The current CPU is offline
 
 After this check, the packet is sent to the (possibly updated) current

Documentation/powerpc/transactional_memory.txt

@@ -74,23 +74,22 @@ Causes of transaction aborts
 Syscalls
 ========
 
-Syscalls made from within an active transaction will not be performed and the
-transaction will be doomed by the kernel with the failure code TM_CAUSE_SYSCALL
-| TM_CAUSE_PERSISTENT.
+Performing syscalls from within transaction is not recommended, and can lead
+to unpredictable results.
 
-Syscalls made from within a suspended transaction are performed as normal and
-the transaction is not explicitly doomed by the kernel.  However, what the
-kernel does to perform the syscall may result in the transaction being doomed
-by the hardware.  The syscall is performed in suspended mode so any side
-effects will be persistent, independent of transaction success or failure.  No
-guarantees are provided by the kernel about which syscalls will affect
-transaction success.
+Syscalls do not by design abort transactions, but beware: The kernel code will
+not be running in transactional state.  The effect of syscalls will always
+remain visible, but depending on the call they may abort your transaction as a
+side-effect, read soon-to-be-aborted transactional data that should not remain
+invisible, etc.  If you constantly retry a transaction that constantly aborts
+itself by calling a syscall, you'll have a livelock & make no progress.
 
-Care must be taken when relying on syscalls to abort during active transactions
-if the calls are made via a library.  Libraries may cache values (which may
-give the appearance of success) or perform operations that cause transaction
-failure before entering the kernel (which may produce different failure codes).
-Examples are glibc's getpid() and lazy symbol resolution.
+Simple syscalls (e.g. sigprocmask()) "could" be OK.  Even things like write()
+from, say, printf() should be OK as long as the kernel does not access any
+memory that was accessed transactionally.
+
+Consider any syscalls that happen to work as debug-only -- not recommended for
+production use.  Best to queue them up till after the transaction is over.
 
 
 Signals
@@ -177,7 +176,8 @@ kernel aborted a transaction:
  TM_CAUSE_RESCHED       Thread was rescheduled.
  TM_CAUSE_TLBI          Software TLB invalid.
  TM_CAUSE_FAC_UNAV      FP/VEC/VSX unavailable trap.
- TM_CAUSE_SYSCALL       Syscall from active transaction.
+ TM_CAUSE_SYSCALL       Currently unused; future syscalls that must abort
+                        transactions for consistency will use this.
  TM_CAUSE_SIGNAL        Signal delivered.
  TM_CAUSE_MISC          Currently unused.
  TM_CAUSE_ALIGNMENT     Alignment fault.

MAINTAINERS

@@ -892,11 +892,10 @@ S:	Maintained
 F:	arch/arm/mach-alpine/
 
 ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
-M:	Andrew Victor <linux@maxim.org.za>
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Alexandre Belloni <alexandre.belloni@free-electrons.com>
 M:	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://maxim.org.za/at91_26.html
 W:	http://www.linux4sam.org
 S:	Supported
 F:	arch/arm/mach-at91/
@@ -990,6 +989,12 @@ F:	drivers/clocksource/timer-prima2.c
 F:	drivers/clocksource/timer-atlas7.c
 N:	[^a-z]sirf
 
+ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
+M:	Baruch Siach <baruch@tkos.co.il>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+N:	digicolor
+
 ARM/EBSA110 MACHINE SUPPORT
 M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1439,9 +1444,10 @@ ARM/SOCFPGA ARCHITECTURE
 M:	Dinh Nguyen <dinguyen@opensource.altera.com>
 S:	Maintained
 F:	arch/arm/mach-socfpga/
+F:	arch/arm/boot/dts/socfpga*
+F:	arch/arm/configs/socfpga_defconfig
 W:	http://www.rocketboards.org
-T:	git://git.rocketboards.org/linux-socfpga.git
-T:	git://git.rocketboards.org/linux-socfpga-next.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
 
 ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
 M:	Dinh Nguyen <dinguyen@opensource.altera.com>
@@ -2116,8 +2122,9 @@ S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2x/
 
 BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
-M:	Christian Daudt <bcm@fixthebug.org>
 M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Ray Jui <rjui@broadcom.com>
+M:	Scott Branden <sbranden@broadcom.com>
 L:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://github.com/broadcom/mach-bcm
 S:	Maintained
@@ -2168,7 +2175,6 @@ S:	Maintained
 F:	drivers/usb/gadget/udc/bcm63xx_udc.*
 
 BROADCOM BCM7XXX ARM ARCHITECTURE
-M:	Marc Carino <marc.ceeeee@gmail.com>
 M:	Brian Norris <computersforpeace@gmail.com>
 M:	Gregory Fong <gregory.0xf0@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
@@ -3413,6 +3419,13 @@ F:	drivers/gpu/drm/rcar-du/
 F:	drivers/gpu/drm/shmobile/
 F:	include/linux/platform_data/shmob_drm.h
 
+DRM DRIVERS FOR ROCKCHIP
+M:	Mark Yao <mark.yao@rock-chips.com>
+L:	dri-devel@lists.freedesktop.org
+S:	Maintained
+F:	drivers/gpu/drm/rockchip/
+F:	Documentation/devicetree/bindings/video/rockchip*
+
 DSBR100 USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -5035,17 +5048,19 @@ S:	Orphan
 F:	drivers/video/fbdev/imsttfb.c
 
 INFINIBAND SUBSYSTEM
-M:	Roland Dreier <roland@kernel.org>
+M:	Doug Ledford <dledford@redhat.com>
 M:	Sean Hefty <sean.hefty@intel.com>
 M:	Hal Rosenstock <hal.rosenstock@gmail.com>
 L:	linux-rdma@vger.kernel.org
 W:	http://www.openfabrics.org/
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
+T:	git git://github.com/dledford/linux.git
 S:	Supported
 F:	Documentation/infiniband/
 F:	drivers/infiniband/
 F:	include/uapi/linux/if_infiniband.h
+F:	include/uapi/rdma/
+F:	include/rdma/
 
 INOTIFY
 M:	John McCutchan <john@johnmccutchan.com>
@@ -5798,6 +5813,7 @@ F:	drivers/scsi/53c700*
 LED SUBSYSTEM
 M:	Bryan Wu <cooloney@gmail.com>
 M:	Richard Purdie <rpurdie@rpsys.net>
+M:	Jacek Anaszewski <j.anaszewski@samsung.com>
 L:	linux-leds@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
 S:	Maintained
@@ -10523,7 +10539,6 @@ F:	include/linux/virtio_console.h
 F:	include/uapi/linux/virtio_console.h
 
 VIRTIO CORE, NET AND BLOCK DRIVERS
-M:	Rusty Russell <rusty@rustcorp.com.au>
 M:	"Michael S. Tsirkin" <mst@redhat.com>
 L:	virtualization@lists.linux-foundation.org
 S:	Maintained
@@ -11031,6 +11046,7 @@ F:	drivers/media/pci/zoran/
 ZRAM COMPRESSED RAM BLOCK DEVICE DRVIER
 M:	Minchan Kim <minchan@kernel.org>
 M:	Nitin Gupta <ngupta@vflare.org>
+R:	Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/block/zram/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*

arch/arm/boot/dts/am437x-sk-evm.dts

@@ -49,7 +49,7 @@ matrix_keypad: matrix_keypad@0 {
 		pinctrl-0 = <&matrix_keypad_pins>;
 
 		debounce-delay-ms = <5>;
-		col-scan-delay-us = <1500>;
+		col-scan-delay-us = <5>;
 
 		row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH		/* Bank5, pin5 */
 				&gpio5 6 GPIO_ACTIVE_HIGH>;	/* Bank5, pin6 */
@@ -473,7 +473,7 @@ edt-ft5306@38 {
 		interrupt-parent = <&gpio0>;
 		interrupts = <31 0>;
 
-		wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <272>;

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -18,6 +18,7 @@ / {
 	aliases {
 		rtc0 = &mcp_rtc;
 		rtc1 = &tps659038_rtc;
+		rtc2 = &rtc;
 	};
 
 	memory {
@@ -83,7 +84,7 @@ led@3 {
 	gpio_fan: gpio_fan {
 		/* Based on 5v 500mA AFB02505HHB */
 		compatible = "gpio-fan";
-		gpios =  <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
+		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0     0>,
 				     <13000 1>;
 		#cooling-cells = <2>;
@@ -130,8 +131,8 @@ i2c3_pins_default: i2c3_pins_default {
 
 	uart3_pins_default: uart3_pins_default {
 		pinctrl-single,pins = <
-			0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
-			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
+			0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+			0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
 		>;
 	};
 
@@ -455,7 +456,7 @@ &i2c3 {
 	mcp_rtc: rtc@6f {
 		compatible = "microchip,mcp7941x";
 		reg = <0x6f>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>;  /* IRQ_SYS_1N */
+		interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>;  /* IRQ_SYS_1N */
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&mcp79410_pins_default>;
@@ -478,7 +479,7 @@ &cpu0 {
 &uart3 {
 	status = "okay";
 	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			      <&dra7_pmx_core 0x248>;
+			      <&dra7_pmx_core 0x3f8>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins_default>;

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -105,6 +105,10 @@ pcie@1,0 {
 		};
 
 		internal-regs {
+			rtc@10300 {
+				/* No crystal connected to the internal RTC */
+				status = "disabled";
+			};
 			serial@12000 {
 				status = "okay";
 			};

arch/arm/boot/dts/dra7.dtsi

@@ -911,7 +911,7 @@ abb_mpu: regulator-abb-mpu {
 			ti,clock-cycles = <16>;
 
 			reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
-			      <0x4ae06014 0x4>, <0x4a003b20 0x8>,
+			      <0x4ae06014 0x4>, <0x4a003b20 0xc>,
 			      <0x4ae0c158 0x4>;
 			reg-names = "setup-address", "control-address",
 				    "int-address", "efuse-address",
@@ -944,7 +944,7 @@ abb_ivahd: regulator-abb-ivahd {
 			ti,clock-cycles = <16>;
 
 			reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
+			      <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
 			      <0x4a002470 0x4>;
 			reg-names = "setup-address", "control-address",
 				    "int-address", "efuse-address",
@@ -977,7 +977,7 @@ abb_dspeve: regulator-abb-dspeve {
 			ti,clock-cycles = <16>;
 
 			reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
+			      <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
 			      <0x4a00246c 0x4>;
 			reg-names = "setup-address", "control-address",
 				    "int-address", "efuse-address",
@@ -1010,7 +1010,7 @@ abb_gpu: regulator-abb-gpu {
 			ti,clock-cycles = <16>;
 
 			reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
-			      <0x4ae06010 0x4>, <0x4a003b08 0x8>,
+			      <0x4ae06010 0x4>, <0x4a003b08 0xc>,
 			      <0x4ae0c154 0x4>;
 			reg-names = "setup-address", "control-address",
 				    "int-address", "efuse-address",
@@ -1203,7 +1203,7 @@ omap_control_pcie2phy: control-pcie@0x4a003c44 {
 			status = "disabled";
 		};
 
-		rtc@48838000 {
+		rtc: rtc@48838000 {
 			compatible = "ti,am3352-rtc";
 			reg = <0x48838000 0x100>;
 			interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,

arch/arm/boot/dts/exynos4412-odroid-common.dtsi

@@ -9,6 +9,7 @@
 
 #include <dt-bindings/sound/samsung-i2s.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/maxim,max77686.h>
 #include "exynos4412.dtsi"
 
 / {
@@ -105,6 +106,8 @@ watchdog@10060000 {
 
 	rtc@10070000 {
 		status = "okay";
+		clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+		clock-names = "rtc", "rtc_src";
 	};
 
 	g2d@10800000 {

arch/arm/boot/dts/exynos5250-snow.dts

@@ -567,6 +567,7 @@ &mmc_3 {
 	num-slots = <1>;
 	broken-cd;
 	cap-sdio-irq;
+	keep-power-in-suspend;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;

arch/arm/boot/dts/exynos5420-trip-points.dtsi

@@ -28,7 +28,7 @@ cpu-alert-2 {
 		type = "active";
 	};
 	cpu-crit-0 {
-		temperature = <1200000>; /* millicelsius */
+		temperature = <120000>; /* millicelsius */
 		hysteresis = <0>; /* millicelsius */
 		type = "critical";
 	};

arch/arm/boot/dts/exynos5420.dtsi

@@ -536,6 +536,7 @@ dp: dp-controller@145B0000 {
 		clock-names = "dp";
 		phys = <&dp_phy>;
 		phy-names = "dp";
+		power-domains = <&disp_pd>;
 	};
 
 	mipi_phy: video-phy@10040714 {

arch/arm/boot/dts/exynos5440-trip-points.dtsi

@@ -18,7 +18,7 @@ cpu-alert-0 {
 		type = "active";
 	};
 	cpu-crit-0 {
-		temperature = <1050000>; /* millicelsius */
+		temperature = <105000>; /* millicelsius */
 		hysteresis = <0>; /* millicelsius */
 		type = "critical";
 	};

arch/arm/boot/dts/imx23-olinuxino.dts

@@ -12,6 +12,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx23.dtsi"
 
 / {
@@ -93,6 +94,7 @@ usbphy0: usbphy@8007c000 {
 
 	ahb@80080000 {
 		usb0: usb@80080000 {
+			dr_mode = "host";
 			vbus-supply = <&reg_usb0_vbus>;
 			status = "okay";
 		};
@@ -122,7 +124,7 @@ leds {
 
 		user {
 			label = "green";
-			gpios = <&gpio2 1 1>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };

arch/arm/boot/dts/imx25.dtsi

@@ -428,6 +428,7 @@ slcdc@53fc0000 {
 
 			pwm4: pwm@53fc8000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <2>;
 				reg = <0x53fc8000 0x4000>;
 				clocks = <&clks 108>, <&clks 52>;
 				clock-names = "ipg", "per";

arch/arm/boot/dts/imx28.dtsi

@@ -913,7 +913,7 @@ dma_apbx: dma-apbx@80024000 {
 					      80 81 68 69
 					      70 71 72 73
 					      74 75 76 77>;
-				interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+				interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 						  "saif0", "saif1", "i2c0", "i2c1",
 						  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 						  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";

arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi

@@ -31,6 +31,7 @@ reg_usb_otg_vbus: regulator@0 {
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 15 0>;
+			enable-active-high;
 		};
 
 		reg_usb_h1_vbus: regulator@1 {
@@ -40,6 +41,7 @@ reg_usb_h1_vbus: regulator@1 {
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 0 0>;
+			enable-active-high;
 		};
 	};
 

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -185,7 +185,6 @@ vgen6_reg: vgen6 {
 &i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	max7310_a: gpio@30 {

arch/arm/boot/dts/omap3-n900.dts

@@ -498,6 +498,8 @@ tlv320aic3x: tlv320aic3x@18 {
 		DRVDD-supply = <&vmmc2>;
 		IOVDD-supply = <&vio>;
 		DVDD-supply = <&vio>;
+
+		ai3x-micbias-vg = <1>;
 	};
 
 	tlv320aic3x_aux: tlv320aic3x@19 {
@@ -509,6 +511,8 @@ tlv320aic3x_aux: tlv320aic3x@19 {
 		DRVDD-supply = <&vmmc2>;
 		IOVDD-supply = <&vio>;
 		DVDD-supply = <&vio>;
+
+		ai3x-micbias-vg = <2>;
 	};
 
 	tsl2563: tsl2563@29 {

arch/arm/boot/dts/omap3.dtsi

@@ -456,6 +456,7 @@ mmc3: mmc@480ad000 {
 		};
 
 		mmu_isp: mmu@480bd400 {
+			#iommu-cells = <0>;
 			compatible = "ti,omap2-iommu";
 			reg = <0x480bd400 0x80>;
 			interrupts = <24>;
@@ -464,6 +465,7 @@ mmu_isp: mmu@480bd400 {
 		};
 
 		mmu_iva: mmu@5d000000 {
+			#iommu-cells = <0>;
 			compatible = "ti,omap2-iommu";
 			reg = <0x5d000000 0x80>;
 			interrupts = <28>;

arch/arm/boot/dts/omap5.dtsi

@@ -128,7 +128,7 @@ mpu {
 	 * hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap4-l3-noc", "simple-bus";
+		compatible = "ti,omap5-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -545,7 +545,7 @@ hdmi@39 {
 		compatible = "adi,adv7511w";
 		reg = <0x39>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";

arch/arm/boot/dts/ste-dbx5x0.dtsi

@@ -1017,23 +1017,6 @@ cpufreq-cooling {
 			status = "disabled";
 		};
 
-		vmmci: regulator-gpio {
-			compatible = "regulator-gpio";
-
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2900000>;
-			regulator-name = "mmci-reg";
-			regulator-type = "voltage";
-
-			startup-delay-us = <100>;
-			enable-active-high;
-
-			states = <1800000 0x1
-				  2900000 0x0>;
-
-			status = "disabled";
-		};
-
 		mcde@a0350000 {
 			compatible = "stericsson,mcde";
 			reg = <0xa0350000 0x1000>, /* MCDE */

arch/arm/boot/dts/ste-href.dtsi

@@ -111,6 +111,21 @@ i2c@80110000 {
 			pinctrl-1 = <&i2c3_sleep_mode>;
 		};
 
+		vmmci: regulator-gpio {
+			compatible = "regulator-gpio";
+
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-name = "mmci-reg";
+			regulator-type = "voltage";
+
+			startup-delay-us = <100>;
+			enable-active-high;
+
+			states = <1800000 0x1
+				  2900000 0x0>;
+		};
+
 		// External Micro SD slot
 		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;

arch/arm/boot/dts/ste-snowball.dts

@@ -146,8 +146,21 @@ ethernet@0 {
 		};
 
 		vmmci: regulator-gpio {
+			compatible = "regulator-gpio";
+
 			gpios = <&gpio7 4 0x4>;
 			enable-gpio = <&gpio6 25 0x4>;
+
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-name = "mmci-reg";
+			regulator-type = "voltage";
+
+			startup-delay-us = <100>;
+			enable-active-high;
+
+			states = <1800000 0x1
+				  2900000 0x0>;
 		};
 
 		// External Micro SD slot

arch/arm/configs/multi_v7_defconfig

@@ -39,11 +39,14 @@ CONFIG_ARCH_HIP04=y
 CONFIG_ARCH_KEYSTONE=y
 CONFIG_ARCH_MESON=y
 CONFIG_ARCH_MXC=y
+CONFIG_SOC_IMX50=y
 CONFIG_SOC_IMX51=y
 CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
 CONFIG_SOC_VF610=y
+CONFIG_SOC_LS1021A=y
 CONFIG_ARCH_OMAP3=y
 CONFIG_ARCH_OMAP4=y
 CONFIG_SOC_OMAP5=y

arch/arm/configs/omap2plus_defconfig

@@ -393,7 +393,7 @@ CONFIG_TI_EDMA=y
 CONFIG_DMA_OMAP=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXTCON=m
-CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_USB_GPIO=m
 CONFIG_EXTCON_PALMAS=m
 CONFIG_TI_EMIF=m
 CONFIG_PWM=y

arch/arm/include/asm/dma-iommu.h

@@ -25,7 +25,7 @@ struct dma_iommu_mapping {
 };
 
 struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size);
+arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size);
 
 void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping);
 

arch/arm/include/asm/xen/page.h

@@ -110,5 +110,6 @@ static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn)
 bool xen_arch_need_swiotlb(struct device *dev,
 			   unsigned long pfn,
 			   unsigned long mfn);
+unsigned long xen_get_swiotlb_free_pages(unsigned int order);
 
 #endif /* _ASM_ARM_XEN_PAGE_H */

arch/arm/kernel/perf_event_cpu.c

@@ -303,12 +303,17 @@ static int probe_current_pmu(struct arm_pmu *pmu)
 
 static int of_pmu_irq_cfg(struct platform_device *pdev)
 {
-	int i;
+	int i, irq;
 	int *irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL);
 
 	if (!irqs)
 		return -ENOMEM;
 
+	/* Don't bother with PPIs; they're already affine */
+	irq = platform_get_irq(pdev, 0);
+	if (irq >= 0 && irq_is_percpu(irq))
+		return 0;
+
 	for (i = 0; i < pdev->num_resources; ++i) {
 		struct device_node *dn;
 		int cpu;
@@ -317,7 +322,7 @@ static int of_pmu_irq_cfg(struct platform_device *pdev)
 				      i);
 		if (!dn) {
 			pr_warn("Failed to parse %s/interrupt-affinity[%d]\n",
-				of_node_full_name(dn), i);
+				of_node_full_name(pdev->dev.of_node), i);
 			break;
 		}
 

arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ * Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de>
  *
  * This program is free software; you can redistribute it and/or modify it under
  * the terms of the GNU General Public License version 2 as published by the

arch/arm/mach-omap2/prm-regbits-34xx.h

@@ -112,6 +112,7 @@
 #define OMAP3430_VC_CMD_ONLP_SHIFT			16
 #define OMAP3430_VC_CMD_RET_SHIFT			8
 #define OMAP3430_VC_CMD_OFF_SHIFT			0
+#define OMAP3430_SREN_MASK				(1 << 4)
 #define OMAP3430_HSEN_MASK				(1 << 3)
 #define OMAP3430_MCODE_MASK				(0x7 << 0)
 #define OMAP3430_VALID_MASK				(1 << 24)

arch/arm/mach-omap2/prm-regbits-44xx.h

@@ -35,6 +35,7 @@
 #define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT				1
 #define OMAP4430_GLOBAL_WUEN_MASK					(1 << 16)
 #define OMAP4430_HSMCODE_MASK						(0x7 << 0)
+#define OMAP4430_SRMODEEN_MASK						(1 << 4)
 #define OMAP4430_HSMODEEN_MASK						(1 << 3)
 #define OMAP4430_HSSCLL_SHIFT						24
 #define OMAP4430_ICEPICK_RST_SHIFT					9

arch/arm/mach-omap2/vc.c

@@ -316,7 +316,8 @@ static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm)
 	 * idle. And we can also scale voltages to zero for off-idle.
 	 * Note that no actual voltage scaling during off-idle will
 	 * happen unless the board specific twl4030 PMIC scripts are
-	 * loaded.
+	 * loaded. See also omap_vc_i2c_init for comments regarding
+	 * erratum i531.
 	 */
 	val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
 	if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) {
@@ -704,9 +705,16 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
 		return;
 	}
 
+	/*
+	 * Note that for omap3 OMAP3430_SREN_MASK clears SREN to work around
+	 * erratum i531 "Extra Power Consumed When Repeated Start Operation
+	 * Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)".
+	 * Otherwise I2C4 eventually leads into about 23mW extra power being
+	 * consumed even during off idle using VMODE.
+	 */
 	i2c_high_speed = voltdm->pmic->i2c_high_speed;
 	if (i2c_high_speed)
-		voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
+		voltdm->rmw(vc->common->i2c_cfg_clear_mask,
 			    vc->common->i2c_cfg_hsen_mask,
 			    vc->common->i2c_cfg_reg);
 

arch/arm/mach-omap2/vc.h

@@ -34,6 +34,7 @@ struct voltagedomain;
  * @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
  * @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
  * @i2c_cfg_reg: I2C configuration register offset
+ * @i2c_cfg_clear_mask: high-speed mode bit clear mask in I2C config register
  * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
  * @i2c_mcode_mask: MCODE field mask for I2C config register
  *
@@ -52,6 +53,7 @@ struct omap_vc_common {
 	u8 cmd_ret_shift;
 	u8 cmd_off_shift;
 	u8 i2c_cfg_reg;
+	u8 i2c_cfg_clear_mask;
 	u8 i2c_cfg_hsen_mask;
 	u8 i2c_mcode_mask;
 };

arch/arm/mach-omap2/vc3xxx_data.c

@@ -40,6 +40,7 @@ static struct omap_vc_common omap3_vc_common = {
 	.cmd_onlp_shift	 = OMAP3430_VC_CMD_ONLP_SHIFT,
 	.cmd_ret_shift	 = OMAP3430_VC_CMD_RET_SHIFT,
 	.cmd_off_shift	 = OMAP3430_VC_CMD_OFF_SHIFT,
+	.i2c_cfg_clear_mask = OMAP3430_SREN_MASK | OMAP3430_HSEN_MASK,
 	.i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK,
 	.i2c_cfg_reg	 = OMAP3_PRM_VC_I2C_CFG_OFFSET,
 	.i2c_mcode_mask	 = OMAP3430_MCODE_MASK,

arch/arm/mach-omap2/vc44xx_data.c

@@ -42,6 +42,7 @@ static const struct omap_vc_common omap4_vc_common = {
 	.cmd_ret_shift = OMAP4430_RET_SHIFT,
 	.cmd_off_shift = OMAP4430_OFF_SHIFT,
 	.i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET,
+	.i2c_cfg_clear_mask = OMAP4430_SRMODEEN_MASK | OMAP4430_HSMODEEN_MASK,
 	.i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK,
 	.i2c_mcode_mask	 = OMAP4430_HSMCODE_MASK,
 };

arch/arm/mach-pxa/Kconfig

@@ -691,4 +691,13 @@ config SHARPSL_PM_MAX1111
 config PXA310_ULPI
 	bool
 
+config PXA_SYSTEMS_CPLDS
+	tristate "Motherboard cplds"
+	default ARCH_LUBBOCK || MACH_MAINSTONE
+	help
+	  This driver supports the Lubbock and Mainstone multifunction chip
+	  found on the pxa25x development platform system (Lubbock) and pxa27x
+	  development platform system (Mainstone). This IO board supports the
+	  interrupts handling, ethernet controller, flash chips, etc ...
+
 endif

arch/arm/mach-pxa/Makefile

@@ -90,4 +90,5 @@ obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
 obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
 
+obj-$(CONFIG_PXA_SYSTEMS_CPLDS)	+= pxa_cplds_irqs.o
 obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o

arch/arm/mach-pxa/include/mach/lubbock.h

@@ -37,7 +37,9 @@
 #define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
 
 /* Board specific IRQs */
-#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LUBBOCK_NR_IRQS		IRQ_BOARD_START
+
+#define LUBBOCK_IRQ(x)		(LUBBOCK_NR_IRQS + (x))
 #define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
 #define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
 #define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
@@ -47,8 +49,7 @@
 #define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
 #define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
 
-#define LUBBOCK_SA1111_IRQ_BASE	(IRQ_BOARD_START + 16)
-#define LUBBOCK_NR_IRQS		(IRQ_BOARD_START + 16 + 55)
+#define LUBBOCK_SA1111_IRQ_BASE	(LUBBOCK_NR_IRQS + 32)
 
 #ifndef __ASSEMBLY__
 extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);

arch/arm/mach-pxa/include/mach/mainstone.h

@@ -120,7 +120,9 @@
 #define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
 
 /* board specific IRQs */
-#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
+#define MAINSTONE_NR_IRQS	IRQ_BOARD_START
+
+#define MAINSTONE_IRQ(x)	(MAINSTONE_NR_IRQS + (x))
 #define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
 #define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
 #define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
@@ -136,6 +138,4 @@
 #define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
 #define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
 
-#define MAINSTONE_NR_IRQS	(IRQ_BOARD_START + 16)
-
 #endif

arch/arm/mach-pxa/lubbock.c

@@ -12,6 +12,7 @@
  *  published by the Free Software Foundation.
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -123,84 +124,6 @@ void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
 }
 EXPORT_SYMBOL(lubbock_set_misc_wr);
 
-static unsigned long lubbock_irq_enabled;
-
-static void lubbock_mask_irq(struct irq_data *d)
-{
-	int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
-	LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
-}
-
-static void lubbock_unmask_irq(struct irq_data *d)
-{
-	int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-	LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
-	LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
-}
-
-static struct irq_chip lubbock_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= lubbock_mask_irq,
-	.irq_mask	= lubbock_mask_irq,
-	.irq_unmask	= lubbock_unmask_irq,
-};
-
-static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
-	do {
-		/* clear our parent irq */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = LUBBOCK_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
-	} while (pending);
-}
-
-static void __init lubbock_init_irq(void)
-{
-	int irq;
-
-	pxa25x_init_irq();
-
-	/* setup extra lubbock irqs */
-	for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
-		irq_set_chip_and_handler(irq, &lubbock_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void lubbock_irq_resume(void)
-{
-	LUB_IRQ_MASK_EN = lubbock_irq_enabled;
-}
-
-static struct syscore_ops lubbock_irq_syscore_ops = {
-	.resume = lubbock_irq_resume,
-};
-
-static int __init lubbock_irq_device_init(void)
-{
-	if (machine_is_lubbock()) {
-		register_syscore_ops(&lubbock_irq_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(lubbock_irq_device_init);
-
-#endif
-
 static int lubbock_udc_is_connected(void)
 {
 	return (LUB_MISC_RD & (1 << 9)) == 0;
@@ -383,11 +306,38 @@ static struct platform_device lubbock_flash_device[2] = {
 	},
 };
 
+static struct resource lubbock_cplds_resources[] = {
+	[0] = {
+		.start	= LUBBOCK_FPGA_PHYS + 0xc0,
+		.end	= LUBBOCK_FPGA_PHYS + 0xe0 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_GPIO_TO_IRQ(0),
+		.end	= PXA_GPIO_TO_IRQ(0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+	[2] = {
+		.start	= LUBBOCK_IRQ(0),
+		.end	= LUBBOCK_IRQ(6),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lubbock_cplds_device = {
+	.name		= "pxa_cplds_irqs",
+	.id		= -1,
+	.resource	= &lubbock_cplds_resources[0],
+	.num_resources	= 3,
+};
+
+
 static struct platform_device *devices[] __initdata = {
 	&sa1111_device,
 	&smc91x_device,
 	&lubbock_flash_device[0],
 	&lubbock_flash_device[1],
+	&lubbock_cplds_device,
 };
 
 static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -648,7 +598,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
 	/* Maintainer: MontaVista Software Inc. */
 	.map_io		= lubbock_map_io,
 	.nr_irqs	= LUBBOCK_NR_IRQS,
-	.init_irq	= lubbock_init_irq,
+	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.init_time	= pxa_timer_init,
 	.init_machine	= lubbock_init,

arch/arm/mach-pxa/mainstone.c

@@ -13,6 +13,7 @@
  *  published by the Free Software Foundation.
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/syscore_ops.h>
@@ -122,92 +123,6 @@ static unsigned long mainstone_pin_config[] = {
 	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
 };
 
-static unsigned long mainstone_irq_enabled;
-
-static void mainstone_mask_irq(struct irq_data *d)
-{
-	int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
-	MST_INTMSKENA = (mainstone_irq_enabled &= ~(1 << mainstone_irq));
-}
-
-static void mainstone_unmask_irq(struct irq_data *d)
-{
-	int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-	MST_INTSETCLR &= ~(1 << mainstone_irq);
-	MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq));
-}
-
-static struct irq_chip mainstone_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= mainstone_mask_irq,
-	.irq_mask	= mainstone_mask_irq,
-	.irq_unmask	= mainstone_unmask_irq,
-};
-
-static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
-	do {
-		/* clear useless edge notification */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = MAINSTONE_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = MST_INTSETCLR & mainstone_irq_enabled;
-	} while (pending);
-}
-
-static void __init mainstone_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-
-	/* setup extra Mainstone irqs */
-	for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
-		irq_set_chip_and_handler(irq, &mainstone_irq_chip,
-					 handle_level_irq);
-		if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
-		else
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-	set_irq_flags(MAINSTONE_IRQ(8), 0);
-	set_irq_flags(MAINSTONE_IRQ(12), 0);
-
-	MST_INTMSKENA = 0;
-	MST_INTSETCLR = 0;
-
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void mainstone_irq_resume(void)
-{
-	MST_INTMSKENA = mainstone_irq_enabled;
-}
-
-static struct syscore_ops mainstone_irq_syscore_ops = {
-	.resume = mainstone_irq_resume,
-};
-
-static int __init mainstone_irq_device_init(void)
-{
-	if (machine_is_mainstone())
-		register_syscore_ops(&mainstone_irq_syscore_ops);
-
-	return 0;
-}
-
-device_initcall(mainstone_irq_device_init);
-
-#endif
-
-
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= (MST_ETH_PHYS + 0x300),
@@ -487,11 +402,37 @@ static struct platform_device mst_gpio_keys_device = {
 	},
 };
 
+static struct resource mst_cplds_resources[] = {
+	[0] = {
+		.start	= MST_FPGA_PHYS + 0xc0,
+		.end	= MST_FPGA_PHYS + 0xe0 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_GPIO_TO_IRQ(0),
+		.end	= PXA_GPIO_TO_IRQ(0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+	[2] = {
+		.start	= MAINSTONE_IRQ(0),
+		.end	= MAINSTONE_IRQ(15),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mst_cplds_device = {
+	.name		= "pxa_cplds_irqs",
+	.id		= -1,
+	.resource	= &mst_cplds_resources[0],
+	.num_resources	= 3,
+};
+
 static struct platform_device *platform_devices[] __initdata = {
 	&smc91x_device,
 	&mst_flash_device[0],
 	&mst_flash_device[1],
 	&mst_gpio_keys_device,
+	&mst_cplds_device,
 };
 
 static struct pxaohci_platform_data mainstone_ohci_platform_data = {
@@ -718,7 +659,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	.atag_offset	= 0x100,	/* BLOB boot parameter setting */
 	.map_io		= mainstone_map_io,
 	.nr_irqs	= MAINSTONE_NR_IRQS,
-	.init_irq	= mainstone_init_irq,
+	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.init_time	= pxa_timer_init,
 	.init_machine	= mainstone_init,

arch/arm/mach-pxa/pxa_cplds_irqs.c

@@ -0,0 +1,200 @@
+/*
+ * Intel Reference Systems cplds
+ *
+ * Copyright (C) 2014 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Cplds motherboard driver, supporting lubbock and mainstone SoC board.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+
+#define FPGA_IRQ_MASK_EN 0x0
+#define FPGA_IRQ_SET_CLR 0x10
+
+#define CPLDS_NB_IRQ	32
+
+struct cplds {
+	void __iomem *base;
+	int irq;
+	unsigned int irq_mask;
+	struct gpio_desc *gpio0;
+	struct irq_domain *irqdomain;
+};
+
+static irqreturn_t cplds_irq_handler(int in_irq, void *d)
+{
+	struct cplds *fpga = d;
+	unsigned long pending;
+	unsigned int bit;
+
+	pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
+	for_each_set_bit(bit, &pending, CPLDS_NB_IRQ)
+		generic_handle_irq(irq_find_mapping(fpga->irqdomain, bit));
+
+	return IRQ_HANDLED;
+}
+
+static void cplds_irq_mask_ack(struct irq_data *d)
+{
+	struct cplds *fpga = irq_data_get_irq_chip_data(d);
+	unsigned int cplds_irq = irqd_to_hwirq(d);
+	unsigned int set, bit = BIT(cplds_irq);
+
+	fpga->irq_mask &= ~bit;
+	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+	set = readl(fpga->base + FPGA_IRQ_SET_CLR);
+	writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
+}
+
+static void cplds_irq_unmask(struct irq_data *d)
+{
+	struct cplds *fpga = irq_data_get_irq_chip_data(d);
+	unsigned int cplds_irq = irqd_to_hwirq(d);
+	unsigned int bit = BIT(cplds_irq);
+
+	fpga->irq_mask |= bit;
+	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+}
+
+static struct irq_chip cplds_irq_chip = {
+	.name		= "pxa_cplds",
+	.irq_mask_ack	= cplds_irq_mask_ack,
+	.irq_unmask	= cplds_irq_unmask,
+	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
+};
+
+static int cplds_irq_domain_map(struct irq_domain *d, unsigned int irq,
+				   irq_hw_number_t hwirq)
+{
+	struct cplds *fpga = d->host_data;
+
+	irq_set_chip_and_handler(irq, &cplds_irq_chip, handle_level_irq);
+	irq_set_chip_data(irq, fpga);
+
+	return 0;
+}
+
+static const struct irq_domain_ops cplds_irq_domain_ops = {
+	.xlate = irq_domain_xlate_twocell,
+	.map = cplds_irq_domain_map,
+};
+
+static int cplds_resume(struct platform_device *pdev)
+{
+	struct cplds *fpga = platform_get_drvdata(pdev);
+
+	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+
+	return 0;
+}
+
+static int cplds_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct cplds *fpga;
+	int ret;
+	unsigned int base_irq = 0;
+	unsigned long irqflags = 0;
+
+	fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL);
+	if (!fpga)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res) {
+		fpga->irq = (unsigned int)res->start;
+		irqflags = res->flags;
+	}
+	if (!fpga->irq)
+		return -ENODEV;
+
+	base_irq = platform_get_irq(pdev, 1);
+	if (base_irq < 0)
+		base_irq = 0;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	fpga->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(fpga->base))
+		return PTR_ERR(fpga->base);
+
+	platform_set_drvdata(pdev, fpga);
+
+	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+	writel(0, fpga->base + FPGA_IRQ_SET_CLR);
+
+	ret = devm_request_irq(&pdev->dev, fpga->irq, cplds_irq_handler,
+			       irqflags, dev_name(&pdev->dev), fpga);
+	if (ret == -ENOSYS)
+		return -EPROBE_DEFER;
+
+	if (ret) {
+		dev_err(&pdev->dev, "couldn't request main irq%d: %d\n",
+			fpga->irq, ret);
+		return ret;
+	}
+
+	irq_set_irq_wake(fpga->irq, 1);
+	fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node,
+					       CPLDS_NB_IRQ,
+					       &cplds_irq_domain_ops, fpga);
+	if (!fpga->irqdomain)
+		return -ENODEV;
+
+	if (base_irq) {
+		ret = irq_create_strict_mappings(fpga->irqdomain, base_irq, 0,
+						 CPLDS_NB_IRQ);
+		if (ret) {
+			dev_err(&pdev->dev, "couldn't create the irq mapping %d..%d\n",
+				base_irq, base_irq + CPLDS_NB_IRQ);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int cplds_remove(struct platform_device *pdev)
+{
+	struct cplds *fpga = platform_get_drvdata(pdev);
+
+	irq_set_chip_and_handler(fpga->irq, NULL, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id cplds_id_table[] = {
+	{ .compatible = "intel,lubbock-cplds-irqs", },
+	{ .compatible = "intel,mainstone-cplds-irqs", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, cplds_id_table);
+
+static struct platform_driver cplds_driver = {
+	.driver		= {
+		.name	= "pxa_cplds_irqs",
+		.of_match_table = of_match_ptr(cplds_id_table),
+	},
+	.probe		= cplds_probe,
+	.remove		= cplds_remove,
+	.resume		= cplds_resume,
+};
+
+module_platform_driver(cplds_driver);
+
+MODULE_DESCRIPTION("PXA Cplds interrupts driver");
+MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
+MODULE_LICENSE("GPL");

arch/arm/mach-rockchip/pm.c

@@ -44,9 +44,11 @@ static void __iomem *rk3288_bootram_base;
 static phys_addr_t rk3288_bootram_phy;
 
 static struct regmap *pmu_regmap;
+static struct regmap *grf_regmap;
 static struct regmap *sgrf_regmap;
 
 static u32 rk3288_pmu_pwr_mode_con;
+static u32 rk3288_grf_soc_con0;
 static u32 rk3288_sgrf_soc_con0;
 
 static inline u32 rk3288_l2_config(void)
@@ -70,11 +72,25 @@ static void rk3288_slp_mode_set(int level)
 {
 	u32 mode_set, mode_set1;
 
+	regmap_read(grf_regmap, RK3288_GRF_SOC_CON0, &rk3288_grf_soc_con0);
+
 	regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0);
 
 	regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON,
 		    &rk3288_pmu_pwr_mode_con);
 
+	/*
+	 * We need set this bit GRF_FORCE_JTAG here, for the debug module,
+	 * otherwise, it may become inaccessible after resume.
+	 * This creates a potential security issue, as the sdmmc pins may
+	 * accept jtag data for a short time during resume if no card is
+	 * inserted.
+	 * But this is of course also true for the regular boot, before we
+	 * turn of the jtag/sdmmc autodetect.
+	 */
+	regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, GRF_FORCE_JTAG |
+		     GRF_FORCE_JTAG_WRITE);
+
 	/*
 	 * SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR
 	 * PCLK_WDT_GATE - disable WDT during suspend.
@@ -83,6 +99,13 @@ static void rk3288_slp_mode_set(int level)
 		     SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN
 		     | SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE);
 
+	/*
+	 * The dapswjdp can not auto reset before resume, that cause it may
+	 * access some illegal address during resume. Let's disable it before
+	 * suspend, and the MASKROM will enable it back.
+	 */
+	regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, SGRF_DAPDEVICEEN_WRITE);
+
 	/* booting address of resuming system is from this register value */
 	regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR,
 		     rk3288_bootram_phy);
@@ -128,6 +151,9 @@ static void rk3288_slp_mode_set_resume(void)
 	regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
 		     rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE
 		     | SGRF_FAST_BOOT_EN_WRITE);
+
+	regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, rk3288_grf_soc_con0 |
+		     GRF_FORCE_JTAG_WRITE);
 }
 
 static int rockchip_lpmode_enter(unsigned long arg)
@@ -186,6 +212,13 @@ static int rk3288_suspend_init(struct device_node *np)
 		return PTR_ERR(pmu_regmap);
 	}
 
+	grf_regmap = syscon_regmap_lookup_by_compatible(
+				"rockchip,rk3288-grf");
+	if (IS_ERR(grf_regmap)) {
+		pr_err("%s: could not find grf regmap\n", __func__);
+		return PTR_ERR(pmu_regmap);
+	}
+
 	sram_np = of_find_compatible_node(NULL, NULL,
 					  "rockchip,rk3288-pmu-sram");
 	if (!sram_np) {

arch/arm/mach-rockchip/pm.h

@@ -48,6 +48,10 @@ static inline void rockchip_suspend_init(void)
 #define RK3288_PMU_WAKEUP_RST_CLR_CNT	0x44
 #define RK3288_PMU_PWRMODE_CON1		0x90
 
+#define RK3288_GRF_SOC_CON0		0x244
+#define GRF_FORCE_JTAG			BIT(12)
+#define GRF_FORCE_JTAG_WRITE		BIT(28)
+
 #define RK3288_SGRF_SOC_CON0		(0x0000)
 #define RK3288_SGRF_FAST_BOOT_ADDR	(0x0120)
 #define SGRF_PCLK_WDT_GATE		BIT(6)
@@ -55,6 +59,10 @@ static inline void rockchip_suspend_init(void)
 #define SGRF_FAST_BOOT_EN		BIT(8)
 #define SGRF_FAST_BOOT_EN_WRITE		BIT(24)
 
+#define RK3288_SGRF_CPU_CON0		(0x40)
+#define SGRF_DAPDEVICEEN		BIT(0)
+#define SGRF_DAPDEVICEEN_WRITE		BIT(16)
+
 #define RK3288_CRU_MODE_CON		0x50
 #define RK3288_CRU_SEL0_CON		0x60
 #define RK3288_CRU_SEL1_CON		0x64

arch/arm/mach-rockchip/rockchip.c

@@ -30,11 +30,30 @@
 #include "pm.h"
 
 #define RK3288_GRF_SOC_CON0 0x244
+#define RK3288_TIMER6_7_PHYS 0xff810000
 
 static void __init rockchip_timer_init(void)
 {
 	if (of_machine_is_compatible("rockchip,rk3288")) {
 		struct regmap *grf;
+		void __iomem *reg_base;
+
+		/*
+		 * Most/all uboot versions for rk3288 don't enable timer7
+		 * which is needed for the architected timer to work.
+		 * So make sure it is running during early boot.
+		 */
+		reg_base = ioremap(RK3288_TIMER6_7_PHYS, SZ_16K);
+		if (reg_base) {
+			writel(0, reg_base + 0x30);
+			writel(0xffffffff, reg_base + 0x20);
+			writel(0xffffffff, reg_base + 0x24);
+			writel(1, reg_base + 0x30);
+			dsb();
+			iounmap(reg_base);
+		} else {
+			pr_err("rockchip: could not map timer7 registers\n");
+		}
 
 		/*
 		 * Disable auto jtag/sdmmc switching that causes issues

arch/arm/mm/dma-mapping.c

@@ -1878,7 +1878,7 @@ struct dma_map_ops iommu_coherent_ops = {
  * arm_iommu_attach_device function.
  */
 struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size)
+arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size)
 {
 	unsigned int bits = size >> PAGE_SHIFT;
 	unsigned int bitmap_size = BITS_TO_LONGS(bits) * sizeof(long);
@@ -1886,6 +1886,10 @@ arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size)
 	int extensions = 1;
 	int err = -ENOMEM;
 
+	/* currently only 32-bit DMA address space is supported */
+	if (size > DMA_BIT_MASK(32) + 1)
+		return ERR_PTR(-ERANGE);
+
 	if (!bitmap_size)
 		return ERR_PTR(-EINVAL);
 
@@ -2057,13 +2061,6 @@ static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
 	if (!iommu)
 		return false;
 
-	/*
-	 * currently arm_iommu_create_mapping() takes a max of size_t
-	 * for size param. So check this limit for now.
-	 */
-	if (size > SIZE_MAX)
-		return false;
-
 	mapping = arm_iommu_create_mapping(dev->bus, dma_base, size);
 	if (IS_ERR(mapping)) {
 		pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n",

arch/arm/mm/proc-arm1020.S

@@ -22,8 +22,6 @@
  *
  * These are the low level assembler for performing cache and TLB
  * functions on the arm1020.
- *
- *  CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
  */
 #include <linux/linkage.h>
 #include <linux/init.h>

arch/arm/mm/proc-arm1020e.S

@@ -22,8 +22,6 @@
  *
  * These are the low level assembler for performing cache and TLB
  * functions on the arm1020e.
- *
- *  CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
  */
 #include <linux/linkage.h>
 #include <linux/init.h>

arch/arm/mm/proc-arm925.S

@@ -441,9 +441,6 @@ ENTRY(cpu_arm925_set_pte_ext)
 	.type	__arm925_setup, #function
 __arm925_setup:
 	mov	r0, #0
-#if defined(CONFIG_CPU_ICACHE_STREAMING_DISABLE)
-        orr     r0,r0,#1 << 7
-#endif
 
 	/* Transparent on, D-cache clean & flush mode. See  NOTE2 above */
         orr     r0,r0,#1 << 1			@ transparent mode on

arch/arm/mm/proc-feroceon.S

@@ -602,7 +602,6 @@ __\name\()_proc_info:
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
 	initfn	__feroceon_setup, __\name\()_proc_info
-	.long __feroceon_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
 	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP

arch/arm/xen/mm.c

@@ -4,6 +4,7 @@
 #include <linux/gfp.h>
 #include <linux/highmem.h>
 #include <linux/export.h>
+#include <linux/memblock.h>
 #include <linux/of_address.h>
 #include <linux/slab.h>
 #include <linux/types.h>
@@ -21,6 +22,20 @@
 #include <asm/xen/hypercall.h>
 #include <asm/xen/interface.h>
 
+unsigned long xen_get_swiotlb_free_pages(unsigned int order)
+{
+	struct memblock_region *reg;
+	gfp_t flags = __GFP_NOWARN;
+
+	for_each_memblock(memory, reg) {
+		if (reg->base < (phys_addr_t)0xffffffff) {
+			flags |= __GFP_DMA;
+			break;
+		}
+	}
+	return __get_free_pages(flags, order);
+}
+
 enum dma_cache_op {
        DMA_UNMAP,
        DMA_MAP,

arch/arm64/Kconfig

@@ -31,6 +31,7 @@ config ARM64
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
+	select GENERIC_IRQ_SHOW_LEVEL
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD

arch/arm64/include/asm/barrier.h

@@ -65,6 +65,14 @@ do {									\
 do {									\
 	compiletime_assert_atomic_type(*p);				\
 	switch (sizeof(*p)) {						\
+	case 1:								\
+		asm volatile ("stlrb %w1, %0"				\
+				: "=Q" (*p) : "r" (v) : "memory");	\
+		break;							\
+	case 2:								\
+		asm volatile ("stlrh %w1, %0"				\
+				: "=Q" (*p) : "r" (v) : "memory");	\
+		break;							\
 	case 4:								\
 		asm volatile ("stlr %w1, %0"				\
 				: "=Q" (*p) : "r" (v) : "memory");	\
@@ -81,6 +89,14 @@ do {									\
 	typeof(*p) ___p1;						\
 	compiletime_assert_atomic_type(*p);				\
 	switch (sizeof(*p)) {						\
+	case 1:								\
+		asm volatile ("ldarb %w0, %1"				\
+			: "=r" (___p1) : "Q" (*p) : "memory");		\
+		break;							\
+	case 2:								\
+		asm volatile ("ldarh %w0, %1"				\
+			: "=r" (___p1) : "Q" (*p) : "memory");		\
+		break;							\
 	case 4:								\
 		asm volatile ("ldar %w0, %1"				\
 			: "=r" (___p1) : "Q" (*p) : "memory");		\

arch/arm64/kernel/perf_event.c

@@ -1310,7 +1310,7 @@ static const struct of_device_id armpmu_of_device_ids[] = {
 
 static int armpmu_device_probe(struct platform_device *pdev)
 {
-	int i, *irqs;
+	int i, irq, *irqs;
 
 	if (!cpu_pmu)
 		return -ENODEV;
@@ -1319,6 +1319,11 @@ static int armpmu_device_probe(struct platform_device *pdev)
 	if (!irqs)
 		return -ENOMEM;
 
+	/* Don't bother with PPIs; they're already affine */
+	irq = platform_get_irq(pdev, 0);
+	if (irq >= 0 && irq_is_percpu(irq))
+		return 0;
+
 	for (i = 0; i < pdev->num_resources; ++i) {
 		struct device_node *dn;
 		int cpu;
@@ -1327,7 +1332,7 @@ static int armpmu_device_probe(struct platform_device *pdev)
 				      i);
 		if (!dn) {
 			pr_warn("Failed to parse %s/interrupt-affinity[%d]\n",
-				of_node_full_name(dn), i);
+				of_node_full_name(pdev->dev.of_node), i);
 			break;
 		}
 

arch/arm64/mm/dma-mapping.c

@@ -67,8 +67,7 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page, gfp_t flags)
 
 		*ret_page = phys_to_page(phys);
 		ptr = (void *)val;
-		if (flags & __GFP_ZERO)
-			memset(ptr, 0, size);
+		memset(ptr, 0, size);
 	}
 
 	return ptr;
@@ -105,7 +104,6 @@ static void *__dma_alloc_coherent(struct device *dev, size_t size,
 		struct page *page;
 		void *addr;
 
-		size = PAGE_ALIGN(size);
 		page = dma_alloc_from_contiguous(dev, size >> PAGE_SHIFT,
 							get_order(size));
 		if (!page)
@@ -113,8 +111,7 @@ static void *__dma_alloc_coherent(struct device *dev, size_t size,
 
 		*dma_handle = phys_to_dma(dev, page_to_phys(page));
 		addr = page_address(page);
-		if (flags & __GFP_ZERO)
-			memset(addr, 0, size);
+		memset(addr, 0, size);
 		return addr;
 	} else {
 		return swiotlb_alloc_coherent(dev, size, dma_handle, flags);
@@ -195,6 +192,8 @@ static void __dma_free(struct device *dev, size_t size,
 {
 	void *swiotlb_addr = phys_to_virt(dma_to_phys(dev, dma_handle));
 
+	size = PAGE_ALIGN(size);
+
 	if (!is_device_dma_coherent(dev)) {
 		if (__free_from_pool(vaddr, size))
 			return;

arch/m32r/kernel/smp.c

@@ -45,7 +45,7 @@ static volatile unsigned long flushcache_cpumask = 0;
 /*
  * For flush_tlb_others()
  */
-static volatile cpumask_t flush_cpumask;
+static cpumask_t flush_cpumask;
 static struct mm_struct *flush_mm;
 static struct vm_area_struct *flush_vma;
 static volatile unsigned long flush_va;
@@ -415,7 +415,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
 	 */
 	send_IPI_mask(&cpumask, INVALIDATE_TLB_IPI, 0);
 
-	while (!cpumask_empty((cpumask_t*)&flush_cpumask)) {
+	while (!cpumask_empty(&flush_cpumask)) {
 		/* nothing. lockup detection does not belong here */
 		mb();
 	}
@@ -468,7 +468,7 @@ void smp_invalidate_interrupt(void)
 			__flush_tlb_page(va);
 		}
 	}
-	cpumask_clear_cpu(cpu_id, (cpumask_t*)&flush_cpumask);
+	cpumask_clear_cpu(cpu_id, &flush_cpumask);
 }
 
 /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/

arch/powerpc/include/uapi/asm/tm.h

@@ -11,7 +11,7 @@
 #define TM_CAUSE_RESCHED	0xde
 #define TM_CAUSE_TLBI		0xdc
 #define TM_CAUSE_FAC_UNAV	0xda
-#define TM_CAUSE_SYSCALL	0xd8
+#define TM_CAUSE_SYSCALL	0xd8  /* future use */
 #define TM_CAUSE_MISC		0xd6  /* future use */
 #define TM_CAUSE_SIGNAL		0xd4
 #define TM_CAUSE_ALIGNMENT	0xd2

arch/powerpc/kernel/eeh.c

@@ -749,21 +749,24 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
 		eeh_unfreeze_pe(pe, false);
 		eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
 		eeh_pe_dev_traverse(pe, eeh_restore_dev_state, dev);
+		eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
 		break;
 	case pcie_hot_reset:
+		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
 		eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
 		eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
 		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 		eeh_ops->reset(pe, EEH_RESET_HOT);
 		break;
 	case pcie_warm_reset:
+		eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
 		eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
 		eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
 		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 		eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
 		break;
 	default:
-		eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
+		eeh_pe_state_clear(pe, EEH_PE_ISOLATED | EEH_PE_CFG_BLOCKED);
 		return -EINVAL;
 	};
 
@@ -1058,6 +1061,9 @@ void eeh_add_device_early(struct pci_dn *pdn)
 	if (!edev || !eeh_enabled())
 		return;
 
+	if (!eeh_has_flag(EEH_PROBE_MODE_DEVTREE))
+		return;
+
 	/* USB Bus children of PCI devices will not have BUID's */
 	phb = edev->phb;
 	if (NULL == phb ||
@@ -1112,6 +1118,9 @@ void eeh_add_device_late(struct pci_dev *dev)
 		return;
 	}
 
+	if (eeh_has_flag(EEH_PROBE_MODE_DEV))
+		eeh_ops->probe(pdn, NULL);
+
 	/*
 	 * The EEH cache might not be removed correctly because of
 	 * unbalanced kref to the device during unplug time, which

arch/powerpc/kernel/entry_64.S

@@ -34,7 +34,6 @@
 #include <asm/ftrace.h>
 #include <asm/hw_irq.h>
 #include <asm/context_tracking.h>
-#include <asm/tm.h>
 
 /*
  * System calls.
@@ -146,24 +145,6 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 	andi.	r11,r10,_TIF_SYSCALL_DOTRACE
 	bne	syscall_dotrace
 .Lsyscall_dotrace_cont:
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-BEGIN_FTR_SECTION
-	b	1f
-END_FTR_SECTION_IFCLR(CPU_FTR_TM)
-	extrdi.	r11, r12, 1, (63-MSR_TS_T_LG) /* transaction active? */
-	beq+	1f
-
-	/* Doom the transaction and don't perform the syscall: */
-	mfmsr	r11
-	li	r12, 1
-	rldimi	r11, r12, MSR_TM_LG, 63-MSR_TM_LG
-	mtmsrd	r11, 0
-	li	r11, (TM_CAUSE_SYSCALL|TM_CAUSE_PERSISTENT)
-	TABORT(R11)
-
-	b	.Lsyscall_exit
-1:
-#endif
 	cmpldi	0,r0,NR_syscalls
 	bge-	syscall_enosys
 

arch/powerpc/kernel/idle_power7.S

@@ -501,9 +501,11 @@ BEGIN_FTR_SECTION
 	CHECK_HMI_INTERRUPT
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 	ld	r1,PACAR1(r13)
+	ld	r6,_CCR(r1)
 	ld	r4,_MSR(r1)
 	ld	r5,_NIP(r1)
 	addi	r1,r1,INT_FRAME_SIZE
+	mtcr	r6
 	mtspr	SPRN_SRR1,r4
 	mtspr	SPRN_SRR0,r5
 	rfid

arch/powerpc/kvm/book3s_xics.c

@@ -12,6 +12,7 @@
 #include <linux/err.h>
 #include <linux/gfp.h>
 #include <linux/anon_inodes.h>
+#include <linux/spinlock.h>
 
 #include <asm/uaccess.h>
 #include <asm/kvm_book3s.h>
@@ -20,7 +21,6 @@
 #include <asm/xics.h>
 #include <asm/debug.h>
 #include <asm/time.h>
-#include <asm/spinlock.h>
 
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>

arch/powerpc/platforms/powernv/pci-ioda.c

@@ -2693,7 +2693,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 		hose->last_busno = 0xff;
 	}
 	hose->private_data = phb;
-	hose->controller_ops = pnv_pci_controller_ops;
 	phb->hub_id = hub_id;
 	phb->opal_id = phb_id;
 	phb->type = ioda_type;
@@ -2812,6 +2811,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	pnv_pci_controller_ops.enable_device_hook = pnv_pci_enable_device_hook;
 	pnv_pci_controller_ops.window_alignment = pnv_pci_window_alignment;
 	pnv_pci_controller_ops.reset_secondary_bus = pnv_pci_reset_secondary_bus;
+	hose->controller_ops = pnv_pci_controller_ops;
 
 #ifdef CONFIG_PCI_IOV
 	ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov_resources;

arch/powerpc/platforms/pseries/dlpar.c

@@ -412,6 +412,10 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
 	if (rc)
 		return -EINVAL;
 
+	rc = dlpar_acquire_drc(drc_index);
+	if (rc)
+		return -EINVAL;
+
 	parent = of_find_node_by_path("/cpus");
 	if (!parent)
 		return -ENODEV;
@@ -422,12 +426,6 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
 
 	of_node_put(parent);
 
-	rc = dlpar_acquire_drc(drc_index);
-	if (rc) {
-		dlpar_free_cc_nodes(dn);
-		return -EINVAL;
-	}
-
 	rc = dlpar_attach_node(dn);
 	if (rc) {
 		dlpar_release_drc(drc_index);

arch/s390/Kconfig

@@ -115,7 +115,7 @@ config S390
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
-	select HAVE_BPF_JIT if PACK_STACK && HAVE_MARCH_Z9_109_FEATURES
+	select HAVE_BPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES
 	select HAVE_CMPXCHG_DOUBLE
 	select HAVE_CMPXCHG_LOCAL
 	select HAVE_DEBUG_KMEMLEAK

arch/s390/crypto/crypt_s390.h

@@ -3,9 +3,10 @@
  *
  * Support for s390 cryptographic instructions.
  *
- *   Copyright IBM Corp. 2003, 2007
+ *   Copyright IBM Corp. 2003, 2015
  *   Author(s): Thomas Spatzier
  *		Jan Glauber (jan.glauber@de.ibm.com)
+ *		Harald Freudenberger (freude@de.ibm.com)
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
@@ -28,15 +29,17 @@
 #define CRYPT_S390_MSA	0x1
 #define CRYPT_S390_MSA3	0x2
 #define CRYPT_S390_MSA4	0x4
+#define CRYPT_S390_MSA5	0x8
 
 /* s390 cryptographic operations */
 enum crypt_s390_operations {
-	CRYPT_S390_KM   = 0x0100,
-	CRYPT_S390_KMC  = 0x0200,
-	CRYPT_S390_KIMD = 0x0300,
-	CRYPT_S390_KLMD = 0x0400,
-	CRYPT_S390_KMAC = 0x0500,
-	CRYPT_S390_KMCTR = 0x0600
+	CRYPT_S390_KM	 = 0x0100,
+	CRYPT_S390_KMC	 = 0x0200,
+	CRYPT_S390_KIMD  = 0x0300,
+	CRYPT_S390_KLMD  = 0x0400,
+	CRYPT_S390_KMAC  = 0x0500,
+	CRYPT_S390_KMCTR = 0x0600,
+	CRYPT_S390_PPNO  = 0x0700
 };
 
 /*
@@ -138,6 +141,16 @@ enum crypt_s390_kmac_func {
 	KMAC_TDEA_192 = CRYPT_S390_KMAC | 3
 };
 
+/*
+ * function codes for PPNO (PERFORM PSEUDORANDOM NUMBER
+ * OPERATION) instruction
+ */
+enum crypt_s390_ppno_func {
+	PPNO_QUERY	      = CRYPT_S390_PPNO | 0,
+	PPNO_SHA512_DRNG_GEN  = CRYPT_S390_PPNO | 3,
+	PPNO_SHA512_DRNG_SEED = CRYPT_S390_PPNO | 0x83
+};
+
 /**
  * crypt_s390_km:
  * @func: the function code passed to KM; see crypt_s390_km_func
@@ -162,11 +175,11 @@ static inline int crypt_s390_km(long func, void *param,
 	int ret;
 
 	asm volatile(
-		"0:	.insn	rre,0xb92e0000,%3,%1 \n" /* KM opcode */
-		"1:	brc	1,0b \n" /* handle partial completion */
+		"0:	.insn	rre,0xb92e0000,%3,%1\n" /* KM opcode */
+		"1:	brc	1,0b\n" /* handle partial completion */
 		"	la	%0,0\n"
 		"2:\n"
-		EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+		EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
 		: "=d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest)
 		: "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
 	if (ret < 0)
@@ -198,11 +211,11 @@ static inline int crypt_s390_kmc(long func, void *param,
 	int ret;
 
 	asm volatile(
-		"0:	.insn	rre,0xb92f0000,%3,%1 \n" /* KMC opcode */
-		"1:	brc	1,0b \n" /* handle partial completion */
+		"0:	.insn	rre,0xb92f0000,%3,%1\n" /* KMC opcode */
+		"1:	brc	1,0b\n" /* handle partial completion */
 		"	la	%0,0\n"
 		"2:\n"
-		EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+		EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
 		: "=d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest)
 		: "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
 	if (ret < 0)
@@ -233,11 +246,11 @@ static inline int crypt_s390_kimd(long func, void *param,
 	int ret;
 
 	asm volatile(
-		"0:	.insn	rre,0xb93e0000,%1,%1 \n" /* KIMD opcode */
-		"1:	brc	1,0b \n" /* handle partial completion */
+		"0:	.insn	rre,0xb93e0000,%1,%1\n" /* KIMD opcode */
+		"1:	brc	1,0b\n" /* handle partial completion */
 		"	la	%0,0\n"
 		"2:\n"
-		EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+		EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
 		: "=d" (ret), "+a" (__src), "+d" (__src_len)
 		: "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
 	if (ret < 0)
@@ -267,11 +280,11 @@ static inline int crypt_s390_klmd(long func, void *param,
 	int ret;
 
 	asm volatile(
-		"0:	.insn	rre,0xb93f0000,%1,%1 \n" /* KLMD opcode */
-		"1:	brc	1,0b \n" /* handle partial completion */
+		"0:	.insn	rre,0xb93f0000,%1,%1\n" /* KLMD opcode */
+		"1:	brc	1,0b\n" /* handle partial completion */
 		"	la	%0,0\n"
 		"2:\n"
-		EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+		EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
 		: "=d" (ret), "+a" (__src), "+d" (__src_len)
 		: "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
 	if (ret < 0)
@@ -302,11 +315,11 @@ static inline int crypt_s390_kmac(long func, void *param,
 	int ret;
 
 	asm volatile(
-		"0:	.insn	rre,0xb91e0000,%1,%1 \n" /* KLAC opcode */
-		"1:	brc	1,0b \n" /* handle partial completion */
+		"0:	.insn	rre,0xb91e0000,%1,%1\n" /* KLAC opcode */
+		"1:	brc	1,0b\n" /* handle partial completion */
 		"	la	%0,0\n"
 		"2:\n"
-		EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+		EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
 		: "=d" (ret), "+a" (__src), "+d" (__src_len)
 		: "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
 	if (ret < 0)
@@ -340,11 +353,11 @@ static inline int crypt_s390_kmctr(long func, void *param, u8 *dest,
 	int ret = -1;
 
 	asm volatile(
-		"0:	.insn	rrf,0xb92d0000,%3,%1,%4,0 \n" /* KMCTR opcode */
-		"1:	brc	1,0b \n" /* handle partial completion */
+		"0:	.insn	rrf,0xb92d0000,%3,%1,%4,0\n" /* KMCTR opcode */
+		"1:	brc	1,0b\n" /* handle partial completion */
 		"	la	%0,0\n"
 		"2:\n"
-		EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+		EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
 		: "+d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest),
 		  "+a" (__ctr)
 		: "d" (__func), "a" (__param) : "cc", "memory");
@@ -353,6 +366,47 @@ static inline int crypt_s390_kmctr(long func, void *param, u8 *dest,
 	return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len;
 }
 
+/**
+ * crypt_s390_ppno:
+ * @func: the function code passed to PPNO; see crypt_s390_ppno_func
+ * @param: address of parameter block; see POP for details on each func
+ * @dest: address of destination memory area
+ * @dest_len: size of destination memory area in bytes
+ * @seed: address of seed data
+ * @seed_len: size of seed data in bytes
+ *
+ * Executes the PPNO (PERFORM PSEUDORANDOM NUMBER OPERATION)
+ * operation of the CPU.
+ *
+ * Returns -1 for failure, 0 for the query func, number of random
+ * bytes stored in dest buffer for generate function
+ */
+static inline int crypt_s390_ppno(long func, void *param,
+				  u8 *dest, long dest_len,
+				  const u8 *seed, long seed_len)
+{
+	register long  __func	  asm("0") = func & CRYPT_S390_FUNC_MASK;
+	register void *__param	  asm("1") = param;    /* param block (240 bytes) */
+	register u8   *__dest	  asm("2") = dest;     /* buf for recv random bytes */
+	register long  __dest_len asm("3") = dest_len; /* requested random bytes */
+	register const u8 *__seed asm("4") = seed;     /* buf with seed data */
+	register long  __seed_len asm("5") = seed_len; /* bytes in seed buf */
+	int ret = -1;
+
+	asm volatile (
+		"0:	.insn	rre,0xb93c0000,%1,%5\n"	/* PPNO opcode */
+		"1:	brc	1,0b\n"	  /* handle partial completion */
+		"	la	%0,0\n"
+		"2:\n"
+		EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
+		: "+d" (ret), "+a"(__dest), "+d"(__dest_len)
+		: "d"(__func), "a"(__param), "a"(__seed), "d"(__seed_len)
+		: "cc", "memory");
+	if (ret < 0)
+		return ret;
+	return (func & CRYPT_S390_FUNC_MASK) ? dest_len - __dest_len : 0;
+}
+
 /**
  * crypt_s390_func_available:
  * @func: the function code of the specific function; 0 if op in general
@@ -373,6 +427,9 @@ static inline int crypt_s390_func_available(int func,
 		return 0;
 	if (facility_mask & CRYPT_S390_MSA4 && !test_facility(77))
 		return 0;
+	if (facility_mask & CRYPT_S390_MSA5 && !test_facility(57))
+		return 0;
+
 	switch (func & CRYPT_S390_OP_MASK) {
 	case CRYPT_S390_KM:
 		ret = crypt_s390_km(KM_QUERY, &status, NULL, NULL, 0);
@@ -390,8 +447,12 @@ static inline int crypt_s390_func_available(int func,
 		ret = crypt_s390_kmac(KMAC_QUERY, &status, NULL, 0);
 		break;
 	case CRYPT_S390_KMCTR:
-		ret = crypt_s390_kmctr(KMCTR_QUERY, &status, NULL, NULL, 0,
-				       NULL);
+		ret = crypt_s390_kmctr(KMCTR_QUERY, &status,
+				       NULL, NULL, 0, NULL);
+		break;
+	case CRYPT_S390_PPNO:
+		ret = crypt_s390_ppno(PPNO_QUERY, &status,
+				      NULL, 0, NULL, 0);
 		break;
 	default:
 		return 0;
@@ -419,15 +480,14 @@ static inline int crypt_s390_pcc(long func, void *param)
 	int ret = -1;
 
 	asm volatile(
-		"0:	.insn	rre,0xb92c0000,0,0 \n" /* PCC opcode */
-		"1:	brc	1,0b \n" /* handle partial completion */
+		"0:	.insn	rre,0xb92c0000,0,0\n" /* PCC opcode */
+		"1:	brc	1,0b\n" /* handle partial completion */
 		"	la	%0,0\n"
 		"2:\n"
-		EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+		EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
 		: "+d" (ret)
 		: "d" (__func), "a" (__param) : "cc", "memory");
 	return ret;
 }
 
-
 #endif	/* _CRYPTO_ARCH_S390_CRYPT_S390_H */

arch/s390/crypto/prng.c

@@ -1,106 +1,529 @@
 /*
- * Copyright IBM Corp. 2006, 2007
+ * Copyright IBM Corp. 2006, 2015
  * Author(s): Jan Glauber <jan.glauber@de.ibm.com>
+ *	      Harald Freudenberger <freude@de.ibm.com>
  * Driver for the s390 pseudo random number generator
  */
+
+#define KMSG_COMPONENT "prng"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
 #include <linux/fs.h>
+#include <linux/fips.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/device.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/mutex.h>
 #include <linux/random.h>
 #include <linux/slab.h>
 #include <asm/debug.h>
 #include <asm/uaccess.h>
+#include <asm/timex.h>
 
 #include "crypt_s390.h"
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jan Glauber <jan.glauber@de.ibm.com>");
+MODULE_AUTHOR("IBM Corporation");
 MODULE_DESCRIPTION("s390 PRNG interface");
 
-static int prng_chunk_size = 256;
-module_param(prng_chunk_size, int, S_IRUSR | S_IRGRP | S_IROTH);
+
+#define PRNG_MODE_AUTO	  0
+#define PRNG_MODE_TDES	  1
+#define PRNG_MODE_SHA512  2
+
+static unsigned int prng_mode = PRNG_MODE_AUTO;
+module_param_named(mode, prng_mode, int, 0);
+MODULE_PARM_DESC(prng_mode, "PRNG mode: 0 - auto, 1 - TDES, 2 - SHA512");
+
+
+#define PRNG_CHUNKSIZE_TDES_MIN   8
+#define PRNG_CHUNKSIZE_TDES_MAX   (64*1024)
+#define PRNG_CHUNKSIZE_SHA512_MIN 64
+#define PRNG_CHUNKSIZE_SHA512_MAX (64*1024)
+
+static unsigned int prng_chunk_size = 256;
+module_param_named(chunksize, prng_chunk_size, int, 0);
 MODULE_PARM_DESC(prng_chunk_size, "PRNG read chunk size in bytes");
 
-static int prng_entropy_limit = 4096;
-module_param(prng_entropy_limit, int, S_IRUSR | S_IRGRP | S_IROTH | S_IWUSR);
-MODULE_PARM_DESC(prng_entropy_limit,
-	"PRNG add entropy after that much bytes were produced");
+
+#define PRNG_RESEED_LIMIT_TDES		 4096
+#define PRNG_RESEED_LIMIT_TDES_LOWER	 4096
+#define PRNG_RESEED_LIMIT_SHA512       100000
+#define PRNG_RESEED_LIMIT_SHA512_LOWER	10000
+
+static unsigned int prng_reseed_limit;
+module_param_named(reseed_limit, prng_reseed_limit, int, 0);
+MODULE_PARM_DESC(prng_reseed_limit, "PRNG reseed limit");
+
 
 /*
  * Any one who considers arithmetical methods of producing random digits is,
  * of course, in a state of sin. -- John von Neumann
  */
 
-struct s390_prng_data {
-	unsigned long count; /* how many bytes were produced */
-	char *buf;
+static int prng_errorflag;
+
+#define PRNG_GEN_ENTROPY_FAILED  1
+#define PRNG_SELFTEST_FAILED	 2
+#define PRNG_INSTANTIATE_FAILED  3
+#define PRNG_SEED_FAILED	 4
+#define PRNG_RESEED_FAILED	 5
+#define PRNG_GEN_FAILED		 6
+
+struct prng_ws_s {
+	u8  parm_block[32];
+	u32 reseed_counter;
+	u64 byte_counter;
 };
 
-static struct s390_prng_data *p;
-
-/* copied from libica, use a non-zero initial parameter block */
-static unsigned char parm_block[32] = {
-0x0F,0x2B,0x8E,0x63,0x8C,0x8E,0xD2,0x52,0x64,0xB7,0xA0,0x7B,0x75,0x28,0xB8,0xF4,
-0x75,0x5F,0xD2,0xA6,0x8D,0x97,0x11,0xFF,0x49,0xD8,0x23,0xF3,0x7E,0x21,0xEC,0xA0,
+struct ppno_ws_s {
+	u32 res;
+	u32 reseed_counter;
+	u64 stream_bytes;
+	u8  V[112];
+	u8  C[112];
 };
 
-static int prng_open(struct inode *inode, struct file *file)
+struct prng_data_s {
+	struct mutex mutex;
+	union {
+		struct prng_ws_s prngws;
+		struct ppno_ws_s ppnows;
+	};
+	u8 *buf;
+	u32 rest;
+	u8 *prev;
+};
+
+static struct prng_data_s *prng_data;
+
+/* initial parameter block for tdes mode, copied from libica */
+static const u8 initial_parm_block[32] __initconst = {
+	0x0F, 0x2B, 0x8E, 0x63, 0x8C, 0x8E, 0xD2, 0x52,
+	0x64, 0xB7, 0xA0, 0x7B, 0x75, 0x28, 0xB8, 0xF4,
+	0x75, 0x5F, 0xD2, 0xA6, 0x8D, 0x97, 0x11, 0xFF,
+	0x49, 0xD8, 0x23, 0xF3, 0x7E, 0x21, 0xEC, 0xA0 };
+
+
+/*** helper functions ***/
+
+static int generate_entropy(u8 *ebuf, size_t nbytes)
 {
-	return nonseekable_open(inode, file);
+	int n, ret = 0;
+	u8 *pg, *h, hash[32];
+
+	pg = (u8 *) __get_free_page(GFP_KERNEL);
+	if (!pg) {
+		prng_errorflag = PRNG_GEN_ENTROPY_FAILED;
+		return -ENOMEM;
+	}
+
+	while (nbytes) {
+		/* fill page with urandom bytes */
+		get_random_bytes(pg, PAGE_SIZE);
+		/* exor page with stckf values */
+		for (n = 0; n < sizeof(PAGE_SIZE/sizeof(u64)); n++) {
+			u64 *p = ((u64 *)pg) + n;
+			*p ^= get_tod_clock_fast();
+		}
+		n = (nbytes < sizeof(hash)) ? nbytes : sizeof(hash);
+		if (n < sizeof(hash))
+			h = hash;
+		else
+			h = ebuf;
+		/* generate sha256 from this page */
+		if (crypt_s390_kimd(KIMD_SHA_256, h,
+				    pg, PAGE_SIZE) != PAGE_SIZE) {
+			prng_errorflag = PRNG_GEN_ENTROPY_FAILED;
+			ret = -EIO;
+			goto out;
+		}
+		if (n < sizeof(hash))
+			memcpy(ebuf, hash, n);
+		ret += n;
+		ebuf += n;
+		nbytes -= n;
+	}
+
+out:
+	free_page((unsigned long)pg);
+	return ret;
 }
 
-static void prng_add_entropy(void)
+
+/*** tdes functions ***/
+
+static void prng_tdes_add_entropy(void)
 {
 	__u64 entropy[4];
 	unsigned int i;
 	int ret;
 
 	for (i = 0; i < 16; i++) {
-		ret = crypt_s390_kmc(KMC_PRNG, parm_block, (char *)entropy,
-				     (char *)entropy, sizeof(entropy));
+		ret = crypt_s390_kmc(KMC_PRNG, prng_data->prngws.parm_block,
+				     (char *)entropy, (char *)entropy,
+				     sizeof(entropy));
 		BUG_ON(ret < 0 || ret != sizeof(entropy));
-		memcpy(parm_block, entropy, sizeof(entropy));
+		memcpy(prng_data->prngws.parm_block, entropy, sizeof(entropy));
 	}
 }
 
-static void prng_seed(int nbytes)
+
+static void prng_tdes_seed(int nbytes)
 {
 	char buf[16];
 	int i = 0;
 
-	BUG_ON(nbytes > 16);
+	BUG_ON(nbytes > sizeof(buf));
+
 	get_random_bytes(buf, nbytes);
 
 	/* Add the entropy */
 	while (nbytes >= 8) {
-		*((__u64 *)parm_block) ^= *((__u64 *)(buf+i));
-		prng_add_entropy();
+		*((__u64 *)prng_data->prngws.parm_block) ^= *((__u64 *)(buf+i));
+		prng_tdes_add_entropy();
 		i += 8;
 		nbytes -= 8;
 	}
-	prng_add_entropy();
+	prng_tdes_add_entropy();
+	prng_data->prngws.reseed_counter = 0;
 }
 
-static ssize_t prng_read(struct file *file, char __user *ubuf, size_t nbytes,
-			 loff_t *ppos)
-{
-	int chunk, n;
-	int ret = 0;
-	int tmp;
 
-	/* nbytes can be arbitrary length, we split it into chunks */
+static int __init prng_tdes_instantiate(void)
+{
+	int datalen;
+
+	pr_debug("prng runs in TDES mode with "
+		 "chunksize=%d and reseed_limit=%u\n",
+		 prng_chunk_size, prng_reseed_limit);
+
+	/* memory allocation, prng_data struct init, mutex init */
+	datalen = sizeof(struct prng_data_s) + prng_chunk_size;
+	prng_data = kzalloc(datalen, GFP_KERNEL);
+	if (!prng_data) {
+		prng_errorflag = PRNG_INSTANTIATE_FAILED;
+		return -ENOMEM;
+	}
+	mutex_init(&prng_data->mutex);
+	prng_data->buf = ((u8 *)prng_data) + sizeof(struct prng_data_s);
+	memcpy(prng_data->prngws.parm_block, initial_parm_block, 32);
+
+	/* initialize the PRNG, add 128 bits of entropy */
+	prng_tdes_seed(16);
+
+	return 0;
+}
+
+
+static void prng_tdes_deinstantiate(void)
+{
+	pr_debug("The prng module stopped "
+		 "after running in triple DES mode\n");
+	kzfree(prng_data);
+}
+
+
+/*** sha512 functions ***/
+
+static int __init prng_sha512_selftest(void)
+{
+	/* NIST DRBG testvector for Hash Drbg, Sha-512, Count #0 */
+	static const u8 seed[] __initconst = {
+		0x6b, 0x50, 0xa7, 0xd8, 0xf8, 0xa5, 0x5d, 0x7a,
+		0x3d, 0xf8, 0xbb, 0x40, 0xbc, 0xc3, 0xb7, 0x22,
+		0xd8, 0x70, 0x8d, 0xe6, 0x7f, 0xda, 0x01, 0x0b,
+		0x03, 0xc4, 0xc8, 0x4d, 0x72, 0x09, 0x6f, 0x8c,
+		0x3e, 0xc6, 0x49, 0xcc, 0x62, 0x56, 0xd9, 0xfa,
+		0x31, 0xdb, 0x7a, 0x29, 0x04, 0xaa, 0xf0, 0x25 };
+	static const u8 V0[] __initconst = {
+		0x00, 0xad, 0xe3, 0x6f, 0x9a, 0x01, 0xc7, 0x76,
+		0x61, 0x34, 0x35, 0xf5, 0x4e, 0x24, 0x74, 0x22,
+		0x21, 0x9a, 0x29, 0x89, 0xc7, 0x93, 0x2e, 0x60,
+		0x1e, 0xe8, 0x14, 0x24, 0x8d, 0xd5, 0x03, 0xf1,
+		0x65, 0x5d, 0x08, 0x22, 0x72, 0xd5, 0xad, 0x95,
+		0xe1, 0x23, 0x1e, 0x8a, 0xa7, 0x13, 0xd9, 0x2b,
+		0x5e, 0xbc, 0xbb, 0x80, 0xab, 0x8d, 0xe5, 0x79,
+		0xab, 0x5b, 0x47, 0x4e, 0xdd, 0xee, 0x6b, 0x03,
+		0x8f, 0x0f, 0x5c, 0x5e, 0xa9, 0x1a, 0x83, 0xdd,
+		0xd3, 0x88, 0xb2, 0x75, 0x4b, 0xce, 0x83, 0x36,
+		0x57, 0x4b, 0xf1, 0x5c, 0xca, 0x7e, 0x09, 0xc0,
+		0xd3, 0x89, 0xc6, 0xe0, 0xda, 0xc4, 0x81, 0x7e,
+		0x5b, 0xf9, 0xe1, 0x01, 0xc1, 0x92, 0x05, 0xea,
+		0xf5, 0x2f, 0xc6, 0xc6, 0xc7, 0x8f, 0xbc, 0xf4 };
+	static const u8 C0[] __initconst = {
+		0x00, 0xf4, 0xa3, 0xe5, 0xa0, 0x72, 0x63, 0x95,
+		0xc6, 0x4f, 0x48, 0xd0, 0x8b, 0x5b, 0x5f, 0x8e,
+		0x6b, 0x96, 0x1f, 0x16, 0xed, 0xbc, 0x66, 0x94,
+		0x45, 0x31, 0xd7, 0x47, 0x73, 0x22, 0xa5, 0x86,
+		0xce, 0xc0, 0x4c, 0xac, 0x63, 0xb8, 0x39, 0x50,
+		0xbf, 0xe6, 0x59, 0x6c, 0x38, 0x58, 0x99, 0x1f,
+		0x27, 0xa7, 0x9d, 0x71, 0x2a, 0xb3, 0x7b, 0xf9,
+		0xfb, 0x17, 0x86, 0xaa, 0x99, 0x81, 0xaa, 0x43,
+		0xe4, 0x37, 0xd3, 0x1e, 0x6e, 0xe5, 0xe6, 0xee,
+		0xc2, 0xed, 0x95, 0x4f, 0x53, 0x0e, 0x46, 0x8a,
+		0xcc, 0x45, 0xa5, 0xdb, 0x69, 0x0d, 0x81, 0xc9,
+		0x32, 0x92, 0xbc, 0x8f, 0x33, 0xe6, 0xf6, 0x09,
+		0x7c, 0x8e, 0x05, 0x19, 0x0d, 0xf1, 0xb6, 0xcc,
+		0xf3, 0x02, 0x21, 0x90, 0x25, 0xec, 0xed, 0x0e };
+	static const u8 random[] __initconst = {
+		0x95, 0xb7, 0xf1, 0x7e, 0x98, 0x02, 0xd3, 0x57,
+		0x73, 0x92, 0xc6, 0xa9, 0xc0, 0x80, 0x83, 0xb6,
+		0x7d, 0xd1, 0x29, 0x22, 0x65, 0xb5, 0xf4, 0x2d,
+		0x23, 0x7f, 0x1c, 0x55, 0xbb, 0x9b, 0x10, 0xbf,
+		0xcf, 0xd8, 0x2c, 0x77, 0xa3, 0x78, 0xb8, 0x26,
+		0x6a, 0x00, 0x99, 0x14, 0x3b, 0x3c, 0x2d, 0x64,
+		0x61, 0x1e, 0xee, 0xb6, 0x9a, 0xcd, 0xc0, 0x55,
+		0x95, 0x7c, 0x13, 0x9e, 0x8b, 0x19, 0x0c, 0x7a,
+		0x06, 0x95, 0x5f, 0x2c, 0x79, 0x7c, 0x27, 0x78,
+		0xde, 0x94, 0x03, 0x96, 0xa5, 0x01, 0xf4, 0x0e,
+		0x91, 0x39, 0x6a, 0xcf, 0x8d, 0x7e, 0x45, 0xeb,
+		0xdb, 0xb5, 0x3b, 0xbf, 0x8c, 0x97, 0x52, 0x30,
+		0xd2, 0xf0, 0xff, 0x91, 0x06, 0xc7, 0x61, 0x19,
+		0xae, 0x49, 0x8e, 0x7f, 0xbc, 0x03, 0xd9, 0x0f,
+		0x8e, 0x4c, 0x51, 0x62, 0x7a, 0xed, 0x5c, 0x8d,
+		0x42, 0x63, 0xd5, 0xd2, 0xb9, 0x78, 0x87, 0x3a,
+		0x0d, 0xe5, 0x96, 0xee, 0x6d, 0xc7, 0xf7, 0xc2,
+		0x9e, 0x37, 0xee, 0xe8, 0xb3, 0x4c, 0x90, 0xdd,
+		0x1c, 0xf6, 0xa9, 0xdd, 0xb2, 0x2b, 0x4c, 0xbd,
+		0x08, 0x6b, 0x14, 0xb3, 0x5d, 0xe9, 0x3d, 0xa2,
+		0xd5, 0xcb, 0x18, 0x06, 0x69, 0x8c, 0xbd, 0x7b,
+		0xbb, 0x67, 0xbf, 0xe3, 0xd3, 0x1f, 0xd2, 0xd1,
+		0xdb, 0xd2, 0xa1, 0xe0, 0x58, 0xa3, 0xeb, 0x99,
+		0xd7, 0xe5, 0x1f, 0x1a, 0x93, 0x8e, 0xed, 0x5e,
+		0x1c, 0x1d, 0xe2, 0x3a, 0x6b, 0x43, 0x45, 0xd3,
+		0x19, 0x14, 0x09, 0xf9, 0x2f, 0x39, 0xb3, 0x67,
+		0x0d, 0x8d, 0xbf, 0xb6, 0x35, 0xd8, 0xe6, 0xa3,
+		0x69, 0x32, 0xd8, 0x10, 0x33, 0xd1, 0x44, 0x8d,
+		0x63, 0xb4, 0x03, 0xdd, 0xf8, 0x8e, 0x12, 0x1b,
+		0x6e, 0x81, 0x9a, 0xc3, 0x81, 0x22, 0x6c, 0x13,
+		0x21, 0xe4, 0xb0, 0x86, 0x44, 0xf6, 0x72, 0x7c,
+		0x36, 0x8c, 0x5a, 0x9f, 0x7a, 0x4b, 0x3e, 0xe2 };
+
+	int ret = 0;
+	u8 buf[sizeof(random)];
+	struct ppno_ws_s ws;
+
+	memset(&ws, 0, sizeof(ws));
+
+	/* initial seed */
+	ret = crypt_s390_ppno(PPNO_SHA512_DRNG_SEED,
+			      &ws, NULL, 0,
+			      seed, sizeof(seed));
+	if (ret < 0) {
+		pr_err("The prng self test seed operation for the "
+		       "SHA-512 mode failed with rc=%d\n", ret);
+		prng_errorflag = PRNG_SELFTEST_FAILED;
+		return -EIO;
+	}
+
+	/* check working states V and C */
+	if (memcmp(ws.V, V0, sizeof(V0)) != 0
+	    || memcmp(ws.C, C0, sizeof(C0)) != 0) {
+		pr_err("The prng self test state test "
+		       "for the SHA-512 mode failed\n");
+		prng_errorflag = PRNG_SELFTEST_FAILED;
+		return -EIO;
+	}
+
+	/* generate random bytes */
+	ret = crypt_s390_ppno(PPNO_SHA512_DRNG_GEN,
+			      &ws, buf, sizeof(buf),
+			      NULL, 0);
+	if (ret < 0) {
+		pr_err("The prng self test generate operation for "
+		       "the SHA-512 mode failed with rc=%d\n", ret);
+		prng_errorflag = PRNG_SELFTEST_FAILED;
+		return -EIO;
+	}
+	ret = crypt_s390_ppno(PPNO_SHA512_DRNG_GEN,
+			      &ws, buf, sizeof(buf),
+			      NULL, 0);
+	if (ret < 0) {
+		pr_err("The prng self test generate operation for "
+		       "the SHA-512 mode failed with rc=%d\n", ret);
+		prng_errorflag = PRNG_SELFTEST_FAILED;
+		return -EIO;
+	}
+
+	/* check against expected data */
+	if (memcmp(buf, random, sizeof(random)) != 0) {
+		pr_err("The prng self test data test "
+		       "for the SHA-512 mode failed\n");
+		prng_errorflag = PRNG_SELFTEST_FAILED;
+		return -EIO;
+	}
+
+	return 0;
+}
+
+
+static int __init prng_sha512_instantiate(void)
+{
+	int ret, datalen;
+	u8 seed[64];
+
+	pr_debug("prng runs in SHA-512 mode "
+		 "with chunksize=%d and reseed_limit=%u\n",
+		 prng_chunk_size, prng_reseed_limit);
+
+	/* memory allocation, prng_data struct init, mutex init */
+	datalen = sizeof(struct prng_data_s) + prng_chunk_size;
+	if (fips_enabled)
+		datalen += prng_chunk_size;
+	prng_data = kzalloc(datalen, GFP_KERNEL);
+	if (!prng_data) {
+		prng_errorflag = PRNG_INSTANTIATE_FAILED;
+		return -ENOMEM;
+	}
+	mutex_init(&prng_data->mutex);
+	prng_data->buf = ((u8 *)prng_data) + sizeof(struct prng_data_s);
+
+	/* selftest */
+	ret = prng_sha512_selftest();
+	if (ret)
+		goto outfree;
+
+	/* generate initial seed bytestring, first 48 bytes of entropy */
+	ret = generate_entropy(seed, 48);
+	if (ret != 48)
+		goto outfree;
+	/* followed by 16 bytes of unique nonce */
+	get_tod_clock_ext(seed + 48);
+
+	/* initial seed of the ppno drng */
+	ret = crypt_s390_ppno(PPNO_SHA512_DRNG_SEED,
+			      &prng_data->ppnows, NULL, 0,
+			      seed, sizeof(seed));
+	if (ret < 0) {
+		prng_errorflag = PRNG_SEED_FAILED;
+		ret = -EIO;
+		goto outfree;
+	}
+
+	/* if fips mode is enabled, generate a first block of random
+	   bytes for the FIPS 140-2 Conditional Self Test */
+	if (fips_enabled) {
+		prng_data->prev = prng_data->buf + prng_chunk_size;
+		ret = crypt_s390_ppno(PPNO_SHA512_DRNG_GEN,
+				      &prng_data->ppnows,
+				      prng_data->prev,
+				      prng_chunk_size,
+				      NULL, 0);
+		if (ret < 0 || ret != prng_chunk_size) {
+			prng_errorflag = PRNG_GEN_FAILED;
+			ret = -EIO;
+			goto outfree;
+		}
+	}
+
+	return 0;
+
+outfree:
+	kfree(prng_data);
+	return ret;
+}
+
+
+static void prng_sha512_deinstantiate(void)
+{
+	pr_debug("The prng module stopped after running in SHA-512 mode\n");
+	kzfree(prng_data);
+}
+
+
+static int prng_sha512_reseed(void)
+{
+	int ret;
+	u8 seed[32];
+
+	/* generate 32 bytes of fresh entropy */
+	ret = generate_entropy(seed, sizeof(seed));
+	if (ret != sizeof(seed))
+		return ret;
+
+	/* do a reseed of the ppno drng with this bytestring */
+	ret = crypt_s390_ppno(PPNO_SHA512_DRNG_SEED,
+			      &prng_data->ppnows, NULL, 0,
+			      seed, sizeof(seed));
+	if (ret) {
+		prng_errorflag = PRNG_RESEED_FAILED;
+		return -EIO;
+	}
+
+	return 0;
+}
+
+
+static int prng_sha512_generate(u8 *buf, size_t nbytes)
+{
+	int ret;
+
+	/* reseed needed ? */
+	if (prng_data->ppnows.reseed_counter > prng_reseed_limit) {
+		ret = prng_sha512_reseed();
+		if (ret)
+			return ret;
+	}
+
+	/* PPNO generate */
+	ret = crypt_s390_ppno(PPNO_SHA512_DRNG_GEN,
+			      &prng_data->ppnows, buf, nbytes,
+			      NULL, 0);
+	if (ret < 0 || ret != nbytes) {
+		prng_errorflag = PRNG_GEN_FAILED;
+		return -EIO;
+	}
+
+	/* FIPS 140-2 Conditional Self Test */
+	if (fips_enabled) {
+		if (!memcmp(prng_data->prev, buf, nbytes)) {
+			prng_errorflag = PRNG_GEN_FAILED;
+			return -EILSEQ;
+		}
+		memcpy(prng_data->prev, buf, nbytes);
+	}
+
+	return ret;
+}
+
+
+/*** file io functions ***/
+
+static int prng_open(struct inode *inode, struct file *file)
+{
+	return nonseekable_open(inode, file);
+}
+
+
+static ssize_t prng_tdes_read(struct file *file, char __user *ubuf,
+			      size_t nbytes, loff_t *ppos)
+{
+	int chunk, n, tmp, ret = 0;
+
+	/* lock prng_data struct */
+	if (mutex_lock_interruptible(&prng_data->mutex))
+		return -ERESTARTSYS;
+
 	while (nbytes) {
-		/* same as in extract_entropy_user in random.c */
 		if (need_resched()) {
 			if (signal_pending(current)) {
 				if (ret == 0)
 					ret = -ERESTARTSYS;
 				break;
 			}
+			/* give mutex free before calling schedule() */
+			mutex_unlock(&prng_data->mutex);
 			schedule();
+			/* occopy mutex again */
+			if (mutex_lock_interruptible(&prng_data->mutex)) {
+				if (ret == 0)
+					ret = -ERESTARTSYS;
+				return ret;
+			}
 		}
 
 		/*
@@ -112,12 +535,11 @@ static ssize_t prng_read(struct file *file, char __user *ubuf, size_t nbytes,
 		/* PRNG only likes multiples of 8 bytes */
 		n = (chunk + 7) & -8;
 
-		if (p->count > prng_entropy_limit)
-			prng_seed(8);
+		if (prng_data->prngws.reseed_counter > prng_reseed_limit)
+			prng_tdes_seed(8);
 
 		/* if the CPU supports PRNG stckf is present too */
-		asm volatile(".insn     s,0xb27c0000,%0"
-			     : "=m" (*((unsigned long long *)p->buf)) : : "cc");
+		*((unsigned long long *)prng_data->buf) = get_tod_clock_fast();
 
 		/*
 		 * Beside the STCKF the input for the TDES-EDE is the output
@@ -132,34 +554,258 @@ static ssize_t prng_read(struct file *file, char __user *ubuf, size_t nbytes,
 		 * Note: you can still get strict X9.17 conformity by setting
 		 * prng_chunk_size to 8 bytes.
 		*/
-		tmp = crypt_s390_kmc(KMC_PRNG, parm_block, p->buf, p->buf, n);
-		BUG_ON((tmp < 0) || (tmp != n));
+		tmp = crypt_s390_kmc(KMC_PRNG, prng_data->prngws.parm_block,
+				     prng_data->buf, prng_data->buf, n);
+		if (tmp < 0 || tmp != n) {
+			ret = -EIO;
+			break;
+		}
 
-		p->count += n;
+		prng_data->prngws.byte_counter += n;
+		prng_data->prngws.reseed_counter += n;
 
-		if (copy_to_user(ubuf, p->buf, chunk))
+		if (copy_to_user(ubuf, prng_data->buf, chunk))
 			return -EFAULT;
 
 		nbytes -= chunk;
 		ret += chunk;
 		ubuf += chunk;
 	}
+
+	/* unlock prng_data struct */
+	mutex_unlock(&prng_data->mutex);
+
 	return ret;
 }
 
-static const struct file_operations prng_fops = {
+
+static ssize_t prng_sha512_read(struct file *file, char __user *ubuf,
+				size_t nbytes, loff_t *ppos)
+{
+	int n, ret = 0;
+	u8 *p;
+
+	/* if errorflag is set do nothing and return 'broken pipe' */
+	if (prng_errorflag)
+		return -EPIPE;
+
+	/* lock prng_data struct */
+	if (mutex_lock_interruptible(&prng_data->mutex))
+		return -ERESTARTSYS;
+
+	while (nbytes) {
+		if (need_resched()) {
+			if (signal_pending(current)) {
+				if (ret == 0)
+					ret = -ERESTARTSYS;
+				break;
+			}
+			/* give mutex free before calling schedule() */
+			mutex_unlock(&prng_data->mutex);
+			schedule();
+			/* occopy mutex again */
+			if (mutex_lock_interruptible(&prng_data->mutex)) {
+				if (ret == 0)
+					ret = -ERESTARTSYS;
+				return ret;
+			}
+		}
+		if (prng_data->rest) {
+			/* push left over random bytes from the previous read */
+			p = prng_data->buf + prng_chunk_size - prng_data->rest;
+			n = (nbytes < prng_data->rest) ?
+				nbytes : prng_data->rest;
+			prng_data->rest -= n;
+		} else {
+			/* generate one chunk of random bytes into read buf */
+			p = prng_data->buf;
+			n = prng_sha512_generate(p, prng_chunk_size);
+			if (n < 0) {
+				ret = n;
+				break;
+			}
+			if (nbytes < prng_chunk_size) {
+				n = nbytes;
+				prng_data->rest = prng_chunk_size - n;
+			} else {
+				n = prng_chunk_size;
+				prng_data->rest = 0;
+			}
+		}
+		if (copy_to_user(ubuf, p, n)) {
+			ret = -EFAULT;
+			break;
+		}
+		ubuf += n;
+		nbytes -= n;
+		ret += n;
+	}
+
+	/* unlock prng_data struct */
+	mutex_unlock(&prng_data->mutex);
+
+	return ret;
+}
+
+
+/*** sysfs stuff ***/
+
+static const struct file_operations prng_sha512_fops = {
 	.owner		= THIS_MODULE,
 	.open		= &prng_open,
 	.release	= NULL,
-	.read		= &prng_read,
+	.read		= &prng_sha512_read,
+	.llseek		= noop_llseek,
+};
+static const struct file_operations prng_tdes_fops = {
+	.owner		= THIS_MODULE,
+	.open		= &prng_open,
+	.release	= NULL,
+	.read		= &prng_tdes_read,
 	.llseek		= noop_llseek,
 };
 
-static struct miscdevice prng_dev = {
+static struct miscdevice prng_sha512_dev = {
 	.name	= "prandom",
 	.minor	= MISC_DYNAMIC_MINOR,
-	.fops	= &prng_fops,
+	.fops	= &prng_sha512_fops,
 };
+static struct miscdevice prng_tdes_dev = {
+	.name	= "prandom",
+	.minor	= MISC_DYNAMIC_MINOR,
+	.fops	= &prng_tdes_fops,
+};
+
+
+/* chunksize attribute (ro) */
+static ssize_t prng_chunksize_show(struct device *dev,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%u\n", prng_chunk_size);
+}
+static DEVICE_ATTR(chunksize, 0444, prng_chunksize_show, NULL);
+
+/* counter attribute (ro) */
+static ssize_t prng_counter_show(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	u64 counter;
+
+	if (mutex_lock_interruptible(&prng_data->mutex))
+		return -ERESTARTSYS;
+	if (prng_mode == PRNG_MODE_SHA512)
+		counter = prng_data->ppnows.stream_bytes;
+	else
+		counter = prng_data->prngws.byte_counter;
+	mutex_unlock(&prng_data->mutex);
+
+	return snprintf(buf, PAGE_SIZE, "%llu\n", counter);
+}
+static DEVICE_ATTR(byte_counter, 0444, prng_counter_show, NULL);
+
+/* errorflag attribute (ro) */
+static ssize_t prng_errorflag_show(struct device *dev,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n", prng_errorflag);
+}
+static DEVICE_ATTR(errorflag, 0444, prng_errorflag_show, NULL);
+
+/* mode attribute (ro) */
+static ssize_t prng_mode_show(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	if (prng_mode == PRNG_MODE_TDES)
+		return snprintf(buf, PAGE_SIZE, "TDES\n");
+	else
+		return snprintf(buf, PAGE_SIZE, "SHA512\n");
+}
+static DEVICE_ATTR(mode, 0444, prng_mode_show, NULL);
+
+/* reseed attribute (w) */
+static ssize_t prng_reseed_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	if (mutex_lock_interruptible(&prng_data->mutex))
+		return -ERESTARTSYS;
+	prng_sha512_reseed();
+	mutex_unlock(&prng_data->mutex);
+
+	return count;
+}
+static DEVICE_ATTR(reseed, 0200, NULL, prng_reseed_store);
+
+/* reseed limit attribute (rw) */
+static ssize_t prng_reseed_limit_show(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%u\n", prng_reseed_limit);
+}
+static ssize_t prng_reseed_limit_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t count)
+{
+	unsigned limit;
+
+	if (sscanf(buf, "%u\n", &limit) != 1)
+		return -EINVAL;
+
+	if (prng_mode == PRNG_MODE_SHA512) {
+		if (limit < PRNG_RESEED_LIMIT_SHA512_LOWER)
+			return -EINVAL;
+	} else {
+		if (limit < PRNG_RESEED_LIMIT_TDES_LOWER)
+			return -EINVAL;
+	}
+
+	prng_reseed_limit = limit;
+
+	return count;
+}
+static DEVICE_ATTR(reseed_limit, 0644,
+		   prng_reseed_limit_show, prng_reseed_limit_store);
+
+/* strength attribute (ro) */
+static ssize_t prng_strength_show(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "256\n");
+}
+static DEVICE_ATTR(strength, 0444, prng_strength_show, NULL);
+
+static struct attribute *prng_sha512_dev_attrs[] = {
+	&dev_attr_errorflag.attr,
+	&dev_attr_chunksize.attr,
+	&dev_attr_byte_counter.attr,
+	&dev_attr_mode.attr,
+	&dev_attr_reseed.attr,
+	&dev_attr_reseed_limit.attr,
+	&dev_attr_strength.attr,
+	NULL
+};
+static struct attribute *prng_tdes_dev_attrs[] = {
+	&dev_attr_chunksize.attr,
+	&dev_attr_byte_counter.attr,
+	&dev_attr_mode.attr,
+	NULL
+};
+
+static struct attribute_group prng_sha512_dev_attr_group = {
+	.attrs = prng_sha512_dev_attrs
+};
+static struct attribute_group prng_tdes_dev_attr_group = {
+	.attrs = prng_tdes_dev_attrs
+};
+
+
+/*** module init and exit ***/
 
 static int __init prng_init(void)
 {
@@ -169,43 +815,105 @@ static int __init prng_init(void)
 	if (!crypt_s390_func_available(KMC_PRNG, CRYPT_S390_MSA))
 		return -EOPNOTSUPP;
 
-	if (prng_chunk_size < 8)
-		return -EINVAL;
-
-	p = kmalloc(sizeof(struct s390_prng_data), GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
-	p->count = 0;
-
-	p->buf = kmalloc(prng_chunk_size, GFP_KERNEL);
-	if (!p->buf) {
-		ret = -ENOMEM;
-		goto out_free;
+	/* choose prng mode */
+	if (prng_mode != PRNG_MODE_TDES) {
+		/* check for MSA5 support for PPNO operations */
+		if (!crypt_s390_func_available(PPNO_SHA512_DRNG_GEN,
+					       CRYPT_S390_MSA5)) {
+			if (prng_mode == PRNG_MODE_SHA512) {
+				pr_err("The prng module cannot "
+				       "start in SHA-512 mode\n");
+				return -EOPNOTSUPP;
+			}
+			prng_mode = PRNG_MODE_TDES;
+		} else
+			prng_mode = PRNG_MODE_SHA512;
 	}
 
-	/* initialize the PRNG, add 128 bits of entropy */
-	prng_seed(16);
+	if (prng_mode == PRNG_MODE_SHA512) {
 
-	ret = misc_register(&prng_dev);
-	if (ret)
-		goto out_buf;
-	return 0;
+		/* SHA512 mode */
 
-out_buf:
-	kfree(p->buf);
-out_free:
-	kfree(p);
+		if (prng_chunk_size < PRNG_CHUNKSIZE_SHA512_MIN
+		    || prng_chunk_size > PRNG_CHUNKSIZE_SHA512_MAX)
+			return -EINVAL;
+		prng_chunk_size = (prng_chunk_size + 0x3f) & ~0x3f;
+
+		if (prng_reseed_limit == 0)
+			prng_reseed_limit = PRNG_RESEED_LIMIT_SHA512;
+		else if (prng_reseed_limit < PRNG_RESEED_LIMIT_SHA512_LOWER)
+			return -EINVAL;
+
+		ret = prng_sha512_instantiate();
+		if (ret)
+			goto out;
+
+		ret = misc_register(&prng_sha512_dev);
+		if (ret) {
+			prng_sha512_deinstantiate();
+			goto out;
+		}
+		ret = sysfs_create_group(&prng_sha512_dev.this_device->kobj,
+					 &prng_sha512_dev_attr_group);
+		if (ret) {
+			misc_deregister(&prng_sha512_dev);
+			prng_sha512_deinstantiate();
+			goto out;
+		}
+
+	} else {
+
+		/* TDES mode */
+
+		if (prng_chunk_size < PRNG_CHUNKSIZE_TDES_MIN
+		    || prng_chunk_size > PRNG_CHUNKSIZE_TDES_MAX)
+			return -EINVAL;
+		prng_chunk_size = (prng_chunk_size + 0x07) & ~0x07;
+
+		if (prng_reseed_limit == 0)
+			prng_reseed_limit = PRNG_RESEED_LIMIT_TDES;
+		else if (prng_reseed_limit < PRNG_RESEED_LIMIT_TDES_LOWER)
+			return -EINVAL;
+
+		ret = prng_tdes_instantiate();
+		if (ret)
+			goto out;
+
+		ret = misc_register(&prng_tdes_dev);
+		if (ret) {
+			prng_tdes_deinstantiate();
+			goto out;
+		}
+		ret = sysfs_create_group(&prng_tdes_dev.this_device->kobj,
+					 &prng_tdes_dev_attr_group);
+		if (ret) {
+			misc_deregister(&prng_tdes_dev);
+			prng_tdes_deinstantiate();
+			goto out;
+		}
+
+	}
+
+out:
 	return ret;
 }
 
+
 static void __exit prng_exit(void)
 {
-	/* wipe me */
-	kzfree(p->buf);
-	kfree(p);
-
-	misc_deregister(&prng_dev);
+	if (prng_mode == PRNG_MODE_SHA512) {
+		sysfs_remove_group(&prng_sha512_dev.this_device->kobj,
+				   &prng_sha512_dev_attr_group);
+		misc_deregister(&prng_sha512_dev);
+		prng_sha512_deinstantiate();
+	} else {
+		sysfs_remove_group(&prng_tdes_dev.this_device->kobj,
+				   &prng_tdes_dev_attr_group);
+		misc_deregister(&prng_tdes_dev);
+		prng_tdes_deinstantiate();
+	}
 }
 
+
 module_init(prng_init);
 module_exit(prng_exit);

arch/s390/include/asm/kexec.h

@@ -26,6 +26,9 @@
 /* Not more than 2GB */
 #define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31)
 
+/* Allocate control page with GFP_DMA */
+#define KEXEC_CONTROL_MEMORY_GFP GFP_DMA
+
 /* Maximum address we can use for the crash control pages */
 #define KEXEC_CRASH_CONTROL_MEMORY_LIMIT (-1UL)
 

arch/s390/include/asm/mmu.h

@@ -14,7 +14,9 @@ typedef struct {
 	unsigned long asce_bits;
 	unsigned long asce_limit;
 	unsigned long vdso_base;
-	/* The mmu context has extended page tables. */
+	/* The mmu context allocates 4K page tables. */
+	unsigned int alloc_pgste:1;
+	/* The mmu context uses extended page tables. */
 	unsigned int has_pgste:1;
 	/* The mmu context uses storage keys. */
 	unsigned int use_skey:1;

arch/s390/include/asm/mmu_context.h

@@ -20,8 +20,11 @@ static inline int init_new_context(struct task_struct *tsk,
 	mm->context.flush_mm = 0;
 	mm->context.asce_bits = _ASCE_TABLE_LENGTH | _ASCE_USER_BITS;
 	mm->context.asce_bits |= _ASCE_TYPE_REGION3;
+#ifdef CONFIG_PGSTE
+	mm->context.alloc_pgste = page_table_allocate_pgste;
 	mm->context.has_pgste = 0;
 	mm->context.use_skey = 0;
+#endif
 	mm->context.asce_limit = STACK_TOP_MAX;
 	crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm));
 	return 0;

arch/s390/include/asm/pgalloc.h

@@ -21,6 +21,7 @@ void crst_table_free(struct mm_struct *, unsigned long *);
 unsigned long *page_table_alloc(struct mm_struct *);
 void page_table_free(struct mm_struct *, unsigned long *);
 void page_table_free_rcu(struct mmu_gather *, unsigned long *, unsigned long);
+extern int page_table_allocate_pgste;
 
 int set_guest_storage_key(struct mm_struct *mm, unsigned long addr,
 			  unsigned long key, bool nq);

arch/s390/include/asm/pgtable.h

@@ -12,12 +12,9 @@
 #define _ASM_S390_PGTABLE_H
 
 /*
- * The Linux memory management assumes a three-level page table setup. For
- * s390 31 bit we "fold" the mid level into the top-level page table, so
- * that we physically have the same two-level page table as the s390 mmu
- * expects in 31 bit mode. For s390 64 bit we use three of the five levels
- * the hardware provides (region first and region second tables are not
- * used).
+ * The Linux memory management assumes a three-level page table setup.
+ * For s390 64 bit we use up to four of the five levels the hardware
+ * provides (region first tables are not used).
  *
  * The "pgd_xxx()" functions are trivial for a folded two-level
  * setup: the pgd is never bad, and a pmd always exists (as it's folded
@@ -101,8 +98,8 @@ extern unsigned long zero_page_mask;
 
 #ifndef __ASSEMBLY__
 /*
- * The vmalloc and module area will always be on the topmost area of the kernel
- * mapping. We reserve 96MB (31bit) / 128GB (64bit) for vmalloc and modules.
+ * The vmalloc and module area will always be on the topmost area of the
+ * kernel mapping. We reserve 128GB (64bit) for vmalloc and modules.
  * On 64 bit kernels we have a 2GB area at the top of the vmalloc area where
  * modules will reside. That makes sure that inter module branches always
  * happen without trampolines and in addition the placement within a 2GB frame
@@ -131,38 +128,6 @@ static inline int is_module_addr(void *addr)
 }
 
 /*
- * A 31 bit pagetable entry of S390 has following format:
- *  |   PFRA          |    |  OS  |
- * 0                   0IP0
- * 00000000001111111111222222222233
- * 01234567890123456789012345678901
- *
- * I Page-Invalid Bit:    Page is not available for address-translation
- * P Page-Protection Bit: Store access not possible for page
- *
- * A 31 bit segmenttable entry of S390 has following format:
- *  |   P-table origin      |  |PTL
- * 0                         IC
- * 00000000001111111111222222222233
- * 01234567890123456789012345678901
- *
- * I Segment-Invalid Bit:    Segment is not available for address-translation
- * C Common-Segment Bit:     Segment is not private (PoP 3-30)
- * PTL Page-Table-Length:    Page-table length (PTL+1*16 entries -> up to 256)
- *
- * The 31 bit segmenttable origin of S390 has following format:
- *
- *  |S-table origin   |     | STL |
- * X                   **GPS
- * 00000000001111111111222222222233
- * 01234567890123456789012345678901
- *
- * X Space-Switch event:
- * G Segment-Invalid Bit:     *
- * P Private-Space Bit:       Segment is not private (PoP 3-30)
- * S Storage-Alteration:
- * STL Segment-Table-Length:  Segment-table length (STL+1*16 entries -> up to 2048)
- *
  * A 64 bit pagetable entry of S390 has following format:
  * |			 PFRA			      |0IPC|  OS  |
  * 0000000000111111111122222222223333333333444444444455555555556666
@@ -220,7 +185,6 @@ static inline int is_module_addr(void *addr)
 
 /* Software bits in the page table entry */
 #define _PAGE_PRESENT	0x001		/* SW pte present bit */
-#define _PAGE_TYPE	0x002		/* SW pte type bit */
 #define _PAGE_YOUNG	0x004		/* SW pte young bit */
 #define _PAGE_DIRTY	0x008		/* SW pte dirty bit */
 #define _PAGE_READ	0x010		/* SW pte read bit */
@@ -240,31 +204,34 @@ static inline int is_module_addr(void *addr)
  * table lock held.
  *
  * The following table gives the different possible bit combinations for
- * the pte hardware and software bits in the last 12 bits of a pte:
+ * the pte hardware and software bits in the last 12 bits of a pte
+ * (. unassigned bit, x don't care, t swap type):
  *
  *				842100000000
  *				000084210000
  *				000000008421
- *				.IR...wrdytp
- * empty			.10...000000
- * swap				.10...xxxx10
- * file				.11...xxxxx0
- * prot-none, clean, old	.11...000001
- * prot-none, clean, young	.11...000101
- * prot-none, dirty, old	.10...001001
- * prot-none, dirty, young	.10...001101
- * read-only, clean, old	.11...010001
- * read-only, clean, young	.01...010101
- * read-only, dirty, old	.11...011001
- * read-only, dirty, young	.01...011101
- * read-write, clean, old	.11...110001
- * read-write, clean, young	.01...110101
- * read-write, dirty, old	.10...111001
- * read-write, dirty, young	.00...111101
+ *				.IR.uswrdy.p
+ * empty			.10.00000000
+ * swap				.11..ttttt.0
+ * prot-none, clean, old	.11.xx0000.1
+ * prot-none, clean, young	.11.xx0001.1
+ * prot-none, dirty, old	.10.xx0010.1
+ * prot-none, dirty, young	.10.xx0011.1
+ * read-only, clean, old	.11.xx0100.1
+ * read-only, clean, young	.01.xx0101.1
+ * read-only, dirty, old	.11.xx0110.1
+ * read-only, dirty, young	.01.xx0111.1
+ * read-write, clean, old	.11.xx1100.1
+ * read-write, clean, young	.01.xx1101.1
+ * read-write, dirty, old	.10.xx1110.1
+ * read-write, dirty, young	.00.xx1111.1
+ * HW-bits: R read-only, I invalid
+ * SW-bits: p present, y young, d dirty, r read, w write, s special,
+ *	    u unused, l large
  *
- * pte_present is true for the bit pattern .xx...xxxxx1, (pte & 0x001) == 0x001
- * pte_none    is true for the bit pattern .10...xxxx00, (pte & 0x603) == 0x400
- * pte_swap    is true for the bit pattern .10...xxxx10, (pte & 0x603) == 0x402
+ * pte_none    is true for the bit pattern .10.00000000, pte == 0x400
+ * pte_swap    is true for the bit pattern .11..ooooo.0, (pte & 0x201) == 0x200
+ * pte_present is true for the bit pattern .xx.xxxxxx.1, (pte & 0x001) == 0x001
  */
 
 /* Bits in the segment/region table address-space-control-element */
@@ -335,6 +302,8 @@ static inline int is_module_addr(void *addr)
  * read-write, dirty, young	11..0...0...11
  * The segment table origin is used to distinguish empty (origin==0) from
  * read-write, old segment table entries (origin!=0)
+ * HW-bits: R read-only, I invalid
+ * SW-bits: y young, d dirty, r read, w write
  */
 
 #define _SEGMENT_ENTRY_SPLIT_BIT 11	/* THP splitting bit number */
@@ -423,6 +392,15 @@ static inline int mm_has_pgste(struct mm_struct *mm)
 	return 0;
 }
 
+static inline int mm_alloc_pgste(struct mm_struct *mm)
+{
+#ifdef CONFIG_PGSTE
+	if (unlikely(mm->context.alloc_pgste))
+		return 1;
+#endif
+	return 0;
+}
+
 /*
  * In the case that a guest uses storage keys
  * faults should no longer be backed by zero pages
@@ -582,10 +560,9 @@ static inline int pte_none(pte_t pte)
 
 static inline int pte_swap(pte_t pte)
 {
-	/* Bit pattern: (pte & 0x603) == 0x402 */
-	return (pte_val(pte) & (_PAGE_INVALID | _PAGE_PROTECT |
-				_PAGE_TYPE | _PAGE_PRESENT))
-		== (_PAGE_INVALID | _PAGE_TYPE);
+	/* Bit pattern: (pte & 0x201) == 0x200 */
+	return (pte_val(pte) & (_PAGE_PROTECT | _PAGE_PRESENT))
+		== _PAGE_PROTECT;
 }
 
 static inline int pte_special(pte_t pte)
@@ -1586,51 +1563,51 @@ static inline int has_transparent_hugepage(void)
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
 /*
- * 31 bit swap entry format:
- * A page-table entry has some bits we have to treat in a special way.
- * Bits 0, 20 and bit 23 have to be zero, otherwise an specification
- * exception will occur instead of a page translation exception. The
- * specifiation exception has the bad habit not to store necessary
- * information in the lowcore.
- * Bits 21, 22, 30 and 31 are used to indicate the page type.
- * A swap pte is indicated by bit pattern (pte & 0x603) == 0x402
- * This leaves the bits 1-19 and bits 24-29 to store type and offset.
- * We use the 5 bits from 25-29 for the type and the 20 bits from 1-19
- * plus 24 for the offset.
- * 0|     offset        |0110|o|type |00|
- * 0 0000000001111111111 2222 2 22222 33
- * 0 1234567890123456789 0123 4 56789 01
- *
  * 64 bit swap entry format:
  * A page-table entry has some bits we have to treat in a special way.
  * Bits 52 and bit 55 have to be zero, otherwise an specification
  * exception will occur instead of a page translation exception. The
  * specifiation exception has the bad habit not to store necessary
  * information in the lowcore.
- * Bits 53, 54, 62 and 63 are used to indicate the page type.
- * A swap pte is indicated by bit pattern (pte & 0x603) == 0x402
- * This leaves the bits 0-51 and bits 56-61 to store type and offset.
- * We use the 5 bits from 57-61 for the type and the 53 bits from 0-51
- * plus 56 for the offset.
- * |                      offset                        |0110|o|type |00|
- *  0000000000111111111122222222223333333333444444444455 5555 5 55566 66
- *  0123456789012345678901234567890123456789012345678901 2345 6 78901 23
+ * Bits 54 and 63 are used to indicate the page type.
+ * A swap pte is indicated by bit pattern (pte & 0x201) == 0x200
+ * This leaves the bits 0-51 and bits 56-62 to store type and offset.
+ * We use the 5 bits from 57-61 for the type and the 52 bits from 0-51
+ * for the offset.
+ * |			  offset			|01100|type |00|
+ * |0000000000111111111122222222223333333333444444444455|55555|55566|66|
+ * |0123456789012345678901234567890123456789012345678901|23456|78901|23|
  */
 
-#define __SWP_OFFSET_MASK (~0UL >> 11)
+#define __SWP_OFFSET_MASK	((1UL << 52) - 1)
+#define __SWP_OFFSET_SHIFT	12
+#define __SWP_TYPE_MASK		((1UL << 5) - 1)
+#define __SWP_TYPE_SHIFT	2
 
 static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
 {
 	pte_t pte;
-	offset &= __SWP_OFFSET_MASK;
-	pte_val(pte) = _PAGE_INVALID | _PAGE_TYPE | ((type & 0x1f) << 2) |
-		((offset & 1UL) << 7) | ((offset & ~1UL) << 11);
+
+	pte_val(pte) = _PAGE_INVALID | _PAGE_PROTECT;
+	pte_val(pte) |= (offset & __SWP_OFFSET_MASK) << __SWP_OFFSET_SHIFT;
+	pte_val(pte) |= (type & __SWP_TYPE_MASK) << __SWP_TYPE_SHIFT;
 	return pte;
 }
 
-#define __swp_type(entry)	(((entry).val >> 2) & 0x1f)
-#define __swp_offset(entry)	(((entry).val >> 11) | (((entry).val >> 7) & 1))
-#define __swp_entry(type,offset) ((swp_entry_t) { pte_val(mk_swap_pte((type),(offset))) })
+static inline unsigned long __swp_type(swp_entry_t entry)
+{
+	return (entry.val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK;
+}
+
+static inline unsigned long __swp_offset(swp_entry_t entry)
+{
+	return (entry.val >> __SWP_OFFSET_SHIFT) & __SWP_OFFSET_MASK;
+}
+
+static inline swp_entry_t __swp_entry(unsigned long type, unsigned long offset)
+{
+	return (swp_entry_t) { pte_val(mk_swap_pte(type, offset)) };
+}
 
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })

arch/s390/mm/hugetlbpage.c

@@ -14,20 +14,23 @@ static inline pmd_t __pte_to_pmd(pte_t pte)
 
 	/*
 	 * Convert encoding		  pte bits	   pmd bits
-	 *				.IR...wrdytp	dy..R...I...wr
-	 * empty			.10...000000 -> 00..0...1...00
-	 * prot-none, clean, old	.11...000001 -> 00..1...1...00
-	 * prot-none, clean, young	.11...000101 -> 01..1...1...00
-	 * prot-none, dirty, old	.10...001001 -> 10..1...1...00
-	 * prot-none, dirty, young	.10...001101 -> 11..1...1...00
-	 * read-only, clean, old	.11...010001 -> 00..1...1...01
-	 * read-only, clean, young	.01...010101 -> 01..1...0...01
-	 * read-only, dirty, old	.11...011001 -> 10..1...1...01
-	 * read-only, dirty, young	.01...011101 -> 11..1...0...01
-	 * read-write, clean, old	.11...110001 -> 00..0...1...11
-	 * read-write, clean, young	.01...110101 -> 01..0...0...11
-	 * read-write, dirty, old	.10...111001 -> 10..0...1...11
-	 * read-write, dirty, young	.00...111101 -> 11..0...0...11
+	 *				lIR.uswrdy.p	dy..R...I...wr
+	 * empty			010.000000.0 -> 00..0...1...00
+	 * prot-none, clean, old	111.000000.1 -> 00..1...1...00
+	 * prot-none, clean, young	111.000001.1 -> 01..1...1...00
+	 * prot-none, dirty, old	111.000010.1 -> 10..1...1...00
+	 * prot-none, dirty, young	111.000011.1 -> 11..1...1...00
+	 * read-only, clean, old	111.000100.1 -> 00..1...1...01
+	 * read-only, clean, young	101.000101.1 -> 01..1...0...01
+	 * read-only, dirty, old	111.000110.1 -> 10..1...1...01
+	 * read-only, dirty, young	101.000111.1 -> 11..1...0...01
+	 * read-write, clean, old	111.001100.1 -> 00..1...1...11
+	 * read-write, clean, young	101.001101.1 -> 01..1...0...11
+	 * read-write, dirty, old	110.001110.1 -> 10..0...1...11
+	 * read-write, dirty, young	100.001111.1 -> 11..0...0...11
+	 * HW-bits: R read-only, I invalid
+	 * SW-bits: p present, y young, d dirty, r read, w write, s special,
+	 *	    u unused, l large
 	 */
 	if (pte_present(pte)) {
 		pmd_val(pmd) = pte_val(pte) & PAGE_MASK;
@@ -48,20 +51,23 @@ static inline pte_t __pmd_to_pte(pmd_t pmd)
 
 	/*
 	 * Convert encoding		   pmd bits	    pte bits
-	 *				dy..R...I...wr	  .IR...wrdytp
-	 * empty			00..0...1...00 -> .10...001100
-	 * prot-none, clean, old	00..0...1...00 -> .10...000001
-	 * prot-none, clean, young	01..0...1...00 -> .10...000101
-	 * prot-none, dirty, old	10..0...1...00 -> .10...001001
-	 * prot-none, dirty, young	11..0...1...00 -> .10...001101
-	 * read-only, clean, old	00..1...1...01 -> .11...010001
-	 * read-only, clean, young	01..1...1...01 -> .11...010101
-	 * read-only, dirty, old	10..1...1...01 -> .11...011001
-	 * read-only, dirty, young	11..1...1...01 -> .11...011101
-	 * read-write, clean, old	00..0...1...11 -> .10...110001
-	 * read-write, clean, young	01..0...1...11 -> .10...110101
-	 * read-write, dirty, old	10..0...1...11 -> .10...111001
-	 * read-write, dirty, young	11..0...1...11 -> .10...111101
+	 *				dy..R...I...wr	  lIR.uswrdy.p
+	 * empty			00..0...1...00 -> 010.000000.0
+	 * prot-none, clean, old	00..1...1...00 -> 111.000000.1
+	 * prot-none, clean, young	01..1...1...00 -> 111.000001.1
+	 * prot-none, dirty, old	10..1...1...00 -> 111.000010.1
+	 * prot-none, dirty, young	11..1...1...00 -> 111.000011.1
+	 * read-only, clean, old	00..1...1...01 -> 111.000100.1
+	 * read-only, clean, young	01..1...0...01 -> 101.000101.1
+	 * read-only, dirty, old	10..1...1...01 -> 111.000110.1
+	 * read-only, dirty, young	11..1...0...01 -> 101.000111.1
+	 * read-write, clean, old	00..1...1...11 -> 111.001100.1
+	 * read-write, clean, young	01..1...0...11 -> 101.001101.1
+	 * read-write, dirty, old	10..0...1...11 -> 110.001110.1
+	 * read-write, dirty, young	11..0...0...11 -> 100.001111.1
+	 * HW-bits: R read-only, I invalid
+	 * SW-bits: p present, y young, d dirty, r read, w write, s special,
+	 *	    u unused, l large
 	 */
 	if (pmd_present(pmd)) {
 		pte_val(pte) = pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN_LARGE;
@@ -70,8 +76,8 @@ static inline pte_t __pmd_to_pte(pmd_t pmd)
 		pte_val(pte) |= (pmd_val(pmd) & _SEGMENT_ENTRY_WRITE) << 4;
 		pte_val(pte) |= (pmd_val(pmd) & _SEGMENT_ENTRY_INVALID) << 5;
 		pte_val(pte) |= (pmd_val(pmd) & _SEGMENT_ENTRY_PROTECT);
-		pmd_val(pmd) |= (pte_val(pte) & _PAGE_DIRTY) << 10;
-		pmd_val(pmd) |= (pte_val(pte) & _PAGE_YOUNG) << 10;
+		pte_val(pte) |= (pmd_val(pmd) & _SEGMENT_ENTRY_DIRTY) >> 10;
+		pte_val(pte) |= (pmd_val(pmd) & _SEGMENT_ENTRY_YOUNG) >> 10;
 	} else
 		pte_val(pte) = _PAGE_INVALID;
 	return pte;

arch/s390/mm/pgtable.c

@@ -18,6 +18,7 @@
 #include <linux/rcupdate.h>
 #include <linux/slab.h>
 #include <linux/swapops.h>
+#include <linux/sysctl.h>
 #include <linux/ksm.h>
 #include <linux/mman.h>
 
@@ -920,6 +921,40 @@ unsigned long get_guest_storage_key(struct mm_struct *mm, unsigned long addr)
 }
 EXPORT_SYMBOL(get_guest_storage_key);
 
+static int page_table_allocate_pgste_min = 0;
+static int page_table_allocate_pgste_max = 1;
+int page_table_allocate_pgste = 0;
+EXPORT_SYMBOL(page_table_allocate_pgste);
+
+static struct ctl_table page_table_sysctl[] = {
+	{
+		.procname	= "allocate_pgste",
+		.data		= &page_table_allocate_pgste,
+		.maxlen		= sizeof(int),
+		.mode		= S_IRUGO | S_IWUSR,
+		.proc_handler	= proc_dointvec,
+		.extra1		= &page_table_allocate_pgste_min,
+		.extra2		= &page_table_allocate_pgste_max,
+	},
+	{ }
+};
+
+static struct ctl_table page_table_sysctl_dir[] = {
+	{
+		.procname	= "vm",
+		.maxlen		= 0,
+		.mode		= 0555,
+		.child		= page_table_sysctl,
+	},
+	{ }
+};
+
+static int __init page_table_register_sysctl(void)
+{
+	return register_sysctl_table(page_table_sysctl_dir) ? 0 : -ENOMEM;
+}
+__initcall(page_table_register_sysctl);
+
 #else /* CONFIG_PGSTE */
 
 static inline int page_table_with_pgste(struct page *page)
@@ -963,7 +998,7 @@ unsigned long *page_table_alloc(struct mm_struct *mm)
 	struct page *uninitialized_var(page);
 	unsigned int mask, bit;
 
-	if (mm_has_pgste(mm))
+	if (mm_alloc_pgste(mm))
 		return page_table_alloc_pgste(mm);
 	/* Allocate fragments of a 4K page as 1K/2K page table */
 	spin_lock_bh(&mm->context.list_lock);
@@ -1165,116 +1200,25 @@ static inline void thp_split_mm(struct mm_struct *mm)
 }
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
-static unsigned long page_table_realloc_pmd(struct mmu_gather *tlb,
-				struct mm_struct *mm, pud_t *pud,
-				unsigned long addr, unsigned long end)
-{
-	unsigned long next, *table, *new;
-	struct page *page;
-	spinlock_t *ptl;
-	pmd_t *pmd;
-
-	pmd = pmd_offset(pud, addr);
-	do {
-		next = pmd_addr_end(addr, end);
-again:
-		if (pmd_none_or_clear_bad(pmd))
-			continue;
-		table = (unsigned long *) pmd_deref(*pmd);
-		page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
-		if (page_table_with_pgste(page))
-			continue;
-		/* Allocate new page table with pgstes */
-		new = page_table_alloc_pgste(mm);
-		if (!new)
-			return -ENOMEM;
-
-		ptl = pmd_lock(mm, pmd);
-		if (likely((unsigned long *) pmd_deref(*pmd) == table)) {
-			/* Nuke pmd entry pointing to the "short" page table */
-			pmdp_flush_lazy(mm, addr, pmd);
-			pmd_clear(pmd);
-			/* Copy ptes from old table to new table */
-			memcpy(new, table, PAGE_SIZE/2);
-			clear_table(table, _PAGE_INVALID, PAGE_SIZE/2);
-			/* Establish new table */
-			pmd_populate(mm, pmd, (pte_t *) new);
-			/* Free old table with rcu, there might be a walker! */
-			page_table_free_rcu(tlb, table, addr);
-			new = NULL;
-		}
-		spin_unlock(ptl);
-		if (new) {
-			page_table_free_pgste(new);
-			goto again;
-		}
-	} while (pmd++, addr = next, addr != end);
-
-	return addr;
-}
-
-static unsigned long page_table_realloc_pud(struct mmu_gather *tlb,
-				   struct mm_struct *mm, pgd_t *pgd,
-				   unsigned long addr, unsigned long end)
-{
-	unsigned long next;
-	pud_t *pud;
-
-	pud = pud_offset(pgd, addr);
-	do {
-		next = pud_addr_end(addr, end);
-		if (pud_none_or_clear_bad(pud))
-			continue;
-		next = page_table_realloc_pmd(tlb, mm, pud, addr, next);
-		if (unlikely(IS_ERR_VALUE(next)))
-			return next;
-	} while (pud++, addr = next, addr != end);
-
-	return addr;
-}
-
-static unsigned long page_table_realloc(struct mmu_gather *tlb, struct mm_struct *mm,
-					unsigned long addr, unsigned long end)
-{
-	unsigned long next;
-	pgd_t *pgd;
-
-	pgd = pgd_offset(mm, addr);
-	do {
-		next = pgd_addr_end(addr, end);
-		if (pgd_none_or_clear_bad(pgd))
-			continue;
-		next = page_table_realloc_pud(tlb, mm, pgd, addr, next);
-		if (unlikely(IS_ERR_VALUE(next)))
-			return next;
-	} while (pgd++, addr = next, addr != end);
-
-	return 0;
-}
-
 /*
  * switch on pgstes for its userspace process (for kvm)
  */
 int s390_enable_sie(void)
 {
-	struct task_struct *tsk = current;
-	struct mm_struct *mm = tsk->mm;
-	struct mmu_gather tlb;
+	struct mm_struct *mm = current->mm;
 
 	/* Do we have pgstes? if yes, we are done */
-	if (mm_has_pgste(tsk->mm))
+	if (mm_has_pgste(mm))
 		return 0;
-
+	/* Fail if the page tables are 2K */
+	if (!mm_alloc_pgste(mm))
+		return -EINVAL;
 	down_write(&mm->mmap_sem);
+	mm->context.has_pgste = 1;
 	/* split thp mappings and disable thp for future mappings */
 	thp_split_mm(mm);
-	/* Reallocate the page tables with pgstes */
-	tlb_gather_mmu(&tlb, mm, 0, TASK_SIZE);
-	if (!page_table_realloc(&tlb, mm, 0, TASK_SIZE))
-		mm->context.has_pgste = 1;
-	tlb_finish_mmu(&tlb, 0, TASK_SIZE);
 	up_write(&mm->mmap_sem);
-	return mm->context.has_pgste ? 0 : -ENOMEM;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(s390_enable_sie);
 

arch/tile/kernel/setup.c

@@ -774,7 +774,7 @@ static void __init zone_sizes_init(void)
 		 * though, there'll be no lowmem, so we just alloc_bootmem
 		 * the memmap.  There will be no percpu memory either.
 		 */
-		if (i != 0 && cpumask_test_cpu(i, &isolnodes)) {
+		if (i != 0 && node_isset(i, isolnodes)) {
 			node_memmap_pfn[i] =
 				alloc_bootmem_pfn(0, memmap_size, 0);
 			BUG_ON(node_percpu[i] != 0);

arch/x86/boot/compressed/eboot.c

@@ -1109,6 +1109,8 @@ struct boot_params *make_boot_params(struct efi_config *c)
 	if (!cmdline_ptr)
 		goto fail;
 	hdr->cmd_line_ptr = (unsigned long)cmdline_ptr;
+	/* Fill in upper bits of command line address, NOP on 32 bit  */
+	boot_params->ext_cmd_line_ptr = (u64)(unsigned long)cmdline_ptr >> 32;
 
 	hdr->ramdisk_image = 0;
 	hdr->ramdisk_size = 0;

arch/x86/include/asm/hypervisor.h

@@ -50,7 +50,7 @@ extern const struct hypervisor_x86 *x86_hyper;
 /* Recognized hypervisors */
 extern const struct hypervisor_x86 x86_hyper_vmware;
 extern const struct hypervisor_x86 x86_hyper_ms_hyperv;
-extern const struct hypervisor_x86 x86_hyper_xen_hvm;
+extern const struct hypervisor_x86 x86_hyper_xen;
 extern const struct hypervisor_x86 x86_hyper_kvm;
 
 extern void init_hypervisor(struct cpuinfo_x86 *c);

arch/x86/include/asm/pvclock.h

@@ -95,7 +95,6 @@ unsigned __pvclock_read_cycles(const struct pvclock_vcpu_time_info *src,
 
 struct pvclock_vsyscall_time_info {
 	struct pvclock_vcpu_time_info pvti;
-	u32 migrate_count;
 } __attribute__((__aligned__(SMP_CACHE_BYTES)));
 
 #define PVTI_SIZE sizeof(struct pvclock_vsyscall_time_info)

arch/x86/include/asm/spinlock.h

@@ -169,7 +169,7 @@ static inline int arch_spin_is_contended(arch_spinlock_t *lock)
 	struct __raw_tickets tmp = READ_ONCE(lock->tickets);
 
 	tmp.head &= ~TICKET_SLOWPATH_FLAG;
-	return (tmp.tail - tmp.head) > TICKET_LOCK_INC;
+	return (__ticket_t)(tmp.tail - tmp.head) > TICKET_LOCK_INC;
 }
 #define arch_spin_is_contended	arch_spin_is_contended
 

arch/x86/include/asm/xen/page.h

@@ -269,4 +269,9 @@ static inline bool xen_arch_need_swiotlb(struct device *dev,
 	return false;
 }
 
+static inline unsigned long xen_get_swiotlb_free_pages(unsigned int order)
+{
+	return __get_free_pages(__GFP_NOWARN, order);
+}
+
 #endif /* _ASM_X86_XEN_PAGE_H */

arch/x86/kernel/cpu/hypervisor.c

@@ -27,8 +27,8 @@
 
 static const __initconst struct hypervisor_x86 * const hypervisors[] =
 {
-#ifdef CONFIG_XEN_PVHVM
-	&x86_hyper_xen_hvm,
+#ifdef CONFIG_XEN
+	&x86_hyper_xen,
 #endif
 	&x86_hyper_vmware,
 	&x86_hyper_ms_hyperv,

arch/x86/kernel/cpu/perf_event_intel.c

@@ -2533,34 +2533,6 @@ ssize_t intel_event_sysfs_show(char *page, u64 config)
 	return x86_event_sysfs_show(page, config, event);
 }
 
-static __initconst const struct x86_pmu core_pmu = {
-	.name			= "core",
-	.handle_irq		= x86_pmu_handle_irq,
-	.disable_all		= x86_pmu_disable_all,
-	.enable_all		= core_pmu_enable_all,
-	.enable			= core_pmu_enable_event,
-	.disable		= x86_pmu_disable_event,
-	.hw_config		= x86_pmu_hw_config,
-	.schedule_events	= x86_schedule_events,
-	.eventsel		= MSR_ARCH_PERFMON_EVENTSEL0,
-	.perfctr		= MSR_ARCH_PERFMON_PERFCTR0,
-	.event_map		= intel_pmu_event_map,
-	.max_events		= ARRAY_SIZE(intel_perfmon_event_map),
-	.apic			= 1,
-	/*
-	 * Intel PMCs cannot be accessed sanely above 32 bit width,
-	 * so we install an artificial 1<<31 period regardless of
-	 * the generic event period:
-	 */
-	.max_period		= (1ULL << 31) - 1,
-	.get_event_constraints	= intel_get_event_constraints,
-	.put_event_constraints	= intel_put_event_constraints,
-	.event_constraints	= intel_core_event_constraints,
-	.guest_get_msrs		= core_guest_get_msrs,
-	.format_attrs		= intel_arch_formats_attr,
-	.events_sysfs_show	= intel_event_sysfs_show,
-};
-
 struct intel_shared_regs *allocate_shared_regs(int cpu)
 {
 	struct intel_shared_regs *regs;
@@ -2743,6 +2715,44 @@ static struct attribute *intel_arch3_formats_attr[] = {
 	NULL,
 };
 
+static __initconst const struct x86_pmu core_pmu = {
+	.name			= "core",
+	.handle_irq		= x86_pmu_handle_irq,
+	.disable_all		= x86_pmu_disable_all,
+	.enable_all		= core_pmu_enable_all,
+	.enable			= core_pmu_enable_event,
+	.disable		= x86_pmu_disable_event,
+	.hw_config		= x86_pmu_hw_config,
+	.schedule_events	= x86_schedule_events,
+	.eventsel		= MSR_ARCH_PERFMON_EVENTSEL0,
+	.perfctr		= MSR_ARCH_PERFMON_PERFCTR0,
+	.event_map		= intel_pmu_event_map,
+	.max_events		= ARRAY_SIZE(intel_perfmon_event_map),
+	.apic			= 1,
+	/*
+	 * Intel PMCs cannot be accessed sanely above 32-bit width,
+	 * so we install an artificial 1<<31 period regardless of
+	 * the generic event period:
+	 */
+	.max_period		= (1ULL<<31) - 1,
+	.get_event_constraints	= intel_get_event_constraints,
+	.put_event_constraints	= intel_put_event_constraints,
+	.event_constraints	= intel_core_event_constraints,
+	.guest_get_msrs		= core_guest_get_msrs,
+	.format_attrs		= intel_arch_formats_attr,
+	.events_sysfs_show	= intel_event_sysfs_show,
+
+	/*
+	 * Virtual (or funny metal) CPU can define x86_pmu.extra_regs
+	 * together with PMU version 1 and thus be using core_pmu with
+	 * shared_regs. We need following callbacks here to allocate
+	 * it properly.
+	 */
+	.cpu_prepare		= intel_pmu_cpu_prepare,
+	.cpu_starting		= intel_pmu_cpu_starting,
+	.cpu_dying		= intel_pmu_cpu_dying,
+};
+
 static __initconst const struct x86_pmu intel_pmu = {
 	.name			= "Intel",
 	.handle_irq		= intel_pmu_handle_irq,

arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c

@@ -1,6 +1,13 @@
 /* Nehalem/SandBridge/Haswell uncore support */
 #include "perf_event_intel_uncore.h"
 
+/* Uncore IMC PCI IDs */
+#define PCI_DEVICE_ID_INTEL_SNB_IMC	0x0100
+#define PCI_DEVICE_ID_INTEL_IVB_IMC	0x0154
+#define PCI_DEVICE_ID_INTEL_IVB_E3_IMC	0x0150
+#define PCI_DEVICE_ID_INTEL_HSW_IMC	0x0c00
+#define PCI_DEVICE_ID_INTEL_HSW_U_IMC	0x0a04
+
 /* SNB event control */
 #define SNB_UNC_CTL_EV_SEL_MASK			0x000000ff
 #define SNB_UNC_CTL_UMASK_MASK			0x0000ff00
@@ -472,6 +479,10 @@ static const struct pci_device_id hsw_uncore_pci_ids[] = {
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HSW_IMC),
 		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
 	},
+	{ /* IMC */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HSW_U_IMC),
+		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+	},
 	{ /* end: all zeroes */ },
 };
 
@@ -502,6 +513,7 @@ static const struct imc_uncore_pci_dev desktop_imc_pci_ids[] = {
 	IMC_DEV(IVB_IMC, &ivb_uncore_pci_driver),    /* 3rd Gen Core processor */
 	IMC_DEV(IVB_E3_IMC, &ivb_uncore_pci_driver), /* Xeon E3-1200 v2/3rd Gen Core processor */
 	IMC_DEV(HSW_IMC, &hsw_uncore_pci_driver),    /* 4th Gen Core Processor */
+	IMC_DEV(HSW_U_IMC, &hsw_uncore_pci_driver),  /* 4th Gen Core ULT Mobile Processor */
 	{  /* end marker */ }
 };
 

arch/x86/kernel/process.c

@@ -57,7 +57,7 @@ __visible DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, cpu_tss) = {
 	.io_bitmap		= { [0 ... IO_BITMAP_LONGS] = ~0 },
 #endif
 };
-EXPORT_PER_CPU_SYMBOL_GPL(cpu_tss);
+EXPORT_PER_CPU_SYMBOL(cpu_tss);
 
 #ifdef CONFIG_X86_64
 static DEFINE_PER_CPU(unsigned char, is_idle);
@@ -156,11 +156,13 @@ void flush_thread(void)
 		/* FPU state will be reallocated lazily at the first use. */
 		drop_fpu(tsk);
 		free_thread_xstate(tsk);
-	} else if (!used_math()) {
-		/* kthread execs. TODO: cleanup this horror. */
-		if (WARN_ON(init_fpu(tsk)))
-			force_sig(SIGKILL, tsk);
-		user_fpu_begin();
+	} else {
+		if (!tsk_used_math(tsk)) {
+			/* kthread execs. TODO: cleanup this horror. */
+			if (WARN_ON(init_fpu(tsk)))
+				force_sig(SIGKILL, tsk);
+			user_fpu_begin();
+		}
 		restore_init_xstate();
 	}
 }

arch/x86/kernel/pvclock.c

@@ -141,46 +141,7 @@ void pvclock_read_wallclock(struct pvclock_wall_clock *wall_clock,
 	set_normalized_timespec(ts, now.tv_sec, now.tv_nsec);
 }
 
-static struct pvclock_vsyscall_time_info *pvclock_vdso_info;
-
-static struct pvclock_vsyscall_time_info *
-pvclock_get_vsyscall_user_time_info(int cpu)
-{
-	if (!pvclock_vdso_info) {
-		BUG();
-		return NULL;
-	}
-
-	return &pvclock_vdso_info[cpu];
-}
-
-struct pvclock_vcpu_time_info *pvclock_get_vsyscall_time_info(int cpu)
-{
-	return &pvclock_get_vsyscall_user_time_info(cpu)->pvti;
-}
-
 #ifdef CONFIG_X86_64
-static int pvclock_task_migrate(struct notifier_block *nb, unsigned long l,
-			        void *v)
-{
-	struct task_migration_notifier *mn = v;
-	struct pvclock_vsyscall_time_info *pvti;
-
-	pvti = pvclock_get_vsyscall_user_time_info(mn->from_cpu);
-
-	/* this is NULL when pvclock vsyscall is not initialized */
-	if (unlikely(pvti == NULL))
-		return NOTIFY_DONE;
-
-	pvti->migrate_count++;
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block pvclock_migrate = {
-	.notifier_call = pvclock_task_migrate,
-};
-
 /*
  * Initialize the generic pvclock vsyscall state.  This will allocate
  * a/some page(s) for the per-vcpu pvclock information, set up a
@@ -194,17 +155,12 @@ int __init pvclock_init_vsyscall(struct pvclock_vsyscall_time_info *i,
 
 	WARN_ON (size != PVCLOCK_VSYSCALL_NR_PAGES*PAGE_SIZE);
 
-	pvclock_vdso_info = i;
-
 	for (idx = 0; idx <= (PVCLOCK_FIXMAP_END-PVCLOCK_FIXMAP_BEGIN); idx++) {
 		__set_fixmap(PVCLOCK_FIXMAP_BEGIN + idx,
 			     __pa(i) + (idx*PAGE_SIZE),
 			     PAGE_KERNEL_VVAR);
 	}
 
-
-	register_task_migration_notifier(&pvclock_migrate);
-
 	return 0;
 }
 #endif

arch/x86/kvm/x86.c

@@ -1669,12 +1669,28 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 		&guest_hv_clock, sizeof(guest_hv_clock))))
 		return 0;
 
-	/*
-	 * The interface expects us to write an even number signaling that the
-	 * update is finished. Since the guest won't see the intermediate
-	 * state, we just increase by 2 at the end.
+	/* This VCPU is paused, but it's legal for a guest to read another
+	 * VCPU's kvmclock, so we really have to follow the specification where
+	 * it says that version is odd if data is being modified, and even after
+	 * it is consistent.
+	 *
+	 * Version field updates must be kept separate.  This is because
+	 * kvm_write_guest_cached might use a "rep movs" instruction, and
+	 * writes within a string instruction are weakly ordered.  So there
+	 * are three writes overall.
+	 *
+	 * As a small optimization, only write the version field in the first
+	 * and third write.  The vcpu->pv_time cache is still valid, because the
+	 * version field is the first in the struct.
 	 */
-	vcpu->hv_clock.version = guest_hv_clock.version + 2;
+	BUILD_BUG_ON(offsetof(struct pvclock_vcpu_time_info, version) != 0);
+
+	vcpu->hv_clock.version = guest_hv_clock.version + 1;
+	kvm_write_guest_cached(v->kvm, &vcpu->pv_time,
+				&vcpu->hv_clock,
+				sizeof(vcpu->hv_clock.version));
+
+	smp_wmb();
 
 	/* retain PVCLOCK_GUEST_STOPPED if set in guest copy */
 	pvclock_flags = (guest_hv_clock.flags & PVCLOCK_GUEST_STOPPED);
@@ -1695,6 +1711,13 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 	kvm_write_guest_cached(v->kvm, &vcpu->pv_time,
 				&vcpu->hv_clock,
 				sizeof(vcpu->hv_clock));
+
+	smp_wmb();
+
+	vcpu->hv_clock.version++;
+	kvm_write_guest_cached(v->kvm, &vcpu->pv_time,
+				&vcpu->hv_clock,
+				sizeof(vcpu->hv_clock.version));
 	return 0;
 }
 

arch/x86/mm/ioremap.c

@@ -351,18 +351,20 @@ int arch_ioremap_pmd_supported(void)
  */
 void *xlate_dev_mem_ptr(phys_addr_t phys)
 {
-	void *addr;
-	unsigned long start = phys & PAGE_MASK;
+	unsigned long start  = phys &  PAGE_MASK;
+	unsigned long offset = phys & ~PAGE_MASK;
+	unsigned long vaddr;
 
 	/* If page is RAM, we can use __va. Otherwise ioremap and unmap. */
 	if (page_is_ram(start >> PAGE_SHIFT))
 		return __va(phys);
 
-	addr = (void __force *)ioremap_cache(start, PAGE_SIZE);
-	if (addr)
-		addr = (void *)((unsigned long)addr | (phys & ~PAGE_MASK));
+	vaddr = (unsigned long)ioremap_cache(start, PAGE_SIZE);
+	/* Only add the offset on success and return NULL if the ioremap() failed: */
+	if (vaddr)
+		vaddr += offset;
 
-	return addr;
+	return (void *)vaddr;
 }
 
 void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)

arch/x86/pci/acpi.c

@@ -325,6 +325,26 @@ static void release_pci_root_info(struct pci_host_bridge *bridge)
 	kfree(info);
 }
 
+/*
+ * An IO port or MMIO resource assigned to a PCI host bridge may be
+ * consumed by the host bridge itself or available to its child
+ * bus/devices. The ACPI specification defines a bit (Producer/Consumer)
+ * to tell whether the resource is consumed by the host bridge itself,
+ * but firmware hasn't used that bit consistently, so we can't rely on it.
+ *
+ * On x86 and IA64 platforms, all IO port and MMIO resources are assumed
+ * to be available to child bus/devices except one special case:
+ *     IO port [0xCF8-0xCFF] is consumed by the host bridge itself
+ *     to access PCI configuration space.
+ *
+ * So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF].
+ */
+static bool resource_is_pcicfg_ioport(struct resource *res)
+{
+	return (res->flags & IORESOURCE_IO) &&
+		res->start == 0xCF8 && res->end == 0xCFF;
+}
+
 static void probe_pci_root_info(struct pci_root_info *info,
 				struct acpi_device *device,
 				int busnum, int domain,
@@ -346,8 +366,8 @@ static void probe_pci_root_info(struct pci_root_info *info,
 			"no IO and memory resources present in _CRS\n");
 	else
 		resource_list_for_each_entry_safe(entry, tmp, list) {
-			if ((entry->res->flags & IORESOURCE_WINDOW) == 0 ||
-			    (entry->res->flags & IORESOURCE_DISABLED))
+			if ((entry->res->flags & IORESOURCE_DISABLED) ||
+			    resource_is_pcicfg_ioport(entry->res))
 				resource_list_destroy_entry(entry);
 			else
 				entry->res->name = info->name;