Linux 3.17-rc3

Pull Xtensa updates from Chris Zankel:
 "Xtensa improvements for 3.17:
   - support highmem on cores with aliasing data cache.  Enable highmem
     on kc705 by default
   - simplify addition of new core variants (no need to modify Kconfig /
     Makefiles)
   - improve robustness of unaligned access handler and its interaction
     with window overflow/underflow exception handlers
   - deprecate atomic and spill registers syscalls
   - clean up Kconfig: remove orphan MATH_EMULATION, sort 'select'
     statements
   - wire up renameat2 syscall.

  Various fixes:
   - fix address checks in dma_{alloc,free}_coherent (runtime BUG)
   - fix access to THREAD_RA/THREAD_SP/THREAD_DS (debug build breakage)
   - fix TLBTEMP_BASE_2 region handling in fast_second_level_miss
     (runtime unrecoverable exception)
   - fix a6 and a7 handling in fast_syscall_xtensa (runtime userspace
     register clobbering)
   - fix kernel/user jump out of fast_unaligned (potential runtime
     unrecoverabl exception)
   - replace termios IOCTL code definitions with constants (userspace
     build breakage)"

* tag 'xtensa-20140830' of git://github.com/czankel/xtensa-linux: (25 commits)
  xtensa: deprecate fast_xtensa and fast_spill_registers syscalls
  xtensa: don't allow overflow/underflow on unaligned stack
  xtensa: fix a6 and a7 handling in fast_syscall_xtensa
  xtensa: allow single-stepping through unaligned load/store
  xtensa: move invalid unaligned instruction handler closer to its users
  xtensa: make fast_unaligned store restartable
  xtensa: add double exception fixup handler for fast_unaligned
  xtensa: fix kernel/user jump out of fast_unaligned
  xtensa: configure kc705 for highmem
  xtensa: support highmem in aliasing cache flushing code
  xtensa: support aliasing cache in kmap
  xtensa: support aliasing cache in k[un]map_atomic
  xtensa: implement clear_user_highpage and copy_user_highpage
  xtensa: fix TLBTEMP_BASE_2 region handling in fast_second_level_miss
  xtensa: allow fixmap and kmap span more than one page table
  xtensa: make fixmap region addressing grow with index
  xtensa: fix access to THREAD_RA/THREAD_SP/THREAD_DS
  xtensa: add renameat2 syscall
  xtensa: fix address checks in dma_{alloc,free}_coherent
  xtensa: replace IOCTL code definitions with constants
  ...

Documentation/devicetree/bindings/interrupt-controller/interrupts.txt

@@ -4,11 +4,13 @@ Specifying interrupt information for devices
 1) Interrupt client nodes
 -------------------------
 
-Nodes that describe devices which generate interrupts must contain an either an
-"interrupts" property or an "interrupts-extended" property. These properties
-contain a list of interrupt specifiers, one per output interrupt. The format of
-the interrupt specifier is determined by the interrupt controller to which the
-interrupts are routed; see section 2 below for details.
+Nodes that describe devices which generate interrupts must contain an
+"interrupts" property, an "interrupts-extended" property, or both. If both are
+present, the latter should take precedence; the former may be provided simply
+for compatibility with software that does not recognize the latter. These
+properties contain a list of interrupt specifiers, one per output interrupt. The
+format of the interrupt specifier is determined by the interrupt controller to
+which the interrupts are routed; see section 2 below for details.
 
   Example:
 	interrupt-parent = <&intc1>;

Documentation/devicetree/bindings/mfd/tc3589x.txt

@@ -0,0 +1,107 @@
+* Toshiba TC3589x multi-purpose expander
+
+The Toshiba TC3589x series are I2C-based MFD devices which may expose the
+following built-in devices: gpio, keypad, rotator (vibrator), PWM (for
+e.g. LEDs or vibrators) The included models are:
+
+- TC35890
+- TC35892
+- TC35893
+- TC35894
+- TC35895
+- TC35896
+
+Required properties:
+ - compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893",
+   "toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896"
+ - reg : I2C address of the device
+ - interrupt-parent : specifies which IRQ controller we're connected to
+ - interrupts : the interrupt on the parent the controller is connected to
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <1>, the first cell is the IRQ offset on this
+   TC3589x interrupt controller.
+
+Optional nodes:
+
+- GPIO
+  This GPIO module inside the TC3589x has 24 (TC35890, TC35892) or 20
+  (other models) GPIO lines.
+ - compatible : must be "toshiba,tc3589x-gpio"
+ - interrupts : interrupt on the parent, which must be the tc3589x MFD device
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <2>, the first cell is the IRQ offset on this
+   TC3589x GPIO interrupt controller, the second cell is the interrupt flags
+   in accordance with <dt-bindings/interrupt-controller/irq.h>. The following
+   flags are valid:
+   - IRQ_TYPE_LEVEL_LOW
+   - IRQ_TYPE_LEVEL_HIGH
+   - IRQ_TYPE_EDGE_RISING
+   - IRQ_TYPE_EDGE_FALLING
+   - IRQ_TYPE_EDGE_BOTH
+ - gpio-controller : marks the device node as a GPIO controller
+ - #gpio-cells : should be <2>, the first cell is the GPIO offset on this
+   GPIO controller, the second cell is the flags.
+
+- Keypad
+  This keypad is the same on all variants, supporting up to 96 different
+  keys. The linux-specific properties are modeled on those already existing
+  in other input drivers.
+ - compatible : must be "toshiba,tc3589x-keypad"
+ - debounce-delay-ms : debounce interval in milliseconds
+ - keypad,num-rows : number of rows in the matrix, see
+   bindings/input/matrix-keymap.txt
+ - keypad,num-columns : number of columns in the matrix, see
+   bindings/input/matrix-keymap.txt
+ - linux,keymap: the definition can be found in
+   bindings/input/matrix-keymap.txt
+ - linux,no-autorepeat: do no enable autorepeat feature.
+ - linux,wakeup: use any event on keypad as wakeup event.
+
+Example:
+
+tc35893@44 {
+	compatible = "toshiba,tc35893";
+	reg = <0x44>;
+	interrupt-parent = <&gpio6>;
+	interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	tc3589x_gpio {
+		compatible = "toshiba,tc3589x-gpio";
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	tc3589x_keypad {
+		compatible = "toshiba,tc3589x-keypad";
+		interrupts = <6>;
+		debounce-delay-ms = <4>;
+		keypad,num-columns = <8>;
+		keypad,num-rows = <8>;
+		linux,no-autorepeat;
+		linux,wakeup;
+		linux,keymap = <0x0301006b
+				0x04010066
+				0x06040072
+				0x040200d7
+				0x0303006a
+				0x0205000e
+				0x0607008b
+				0x0500001c
+				0x0403000b
+				0x03040034
+				0x05020067
+				0x0305006c
+				0x040500e7
+				0x0005009e
+				0x06020073
+				0x01030039
+				0x07060069
+				0x050500d9>;
+	};
+};

Documentation/devicetree/bindings/mtd/gpmc-nand.txt

@@ -22,7 +22,7 @@ Optional properties:
 				width of 8 is assumed.
 
  - ti,nand-ecc-opt:		A string setting the ECC layout to use. One of:
-		"sw"		<deprecated> use "ham1" instead
+		"sw"		1-bit Hamming ecc code via software
 		"hw"		<deprecated> use "ham1" instead
 		"hw-romcode"	<deprecated> use "ham1" instead
 		"ham1"		1-bit Hamming ecc code

Documentation/devicetree/bindings/pci/designware-pcie.txt

@@ -2,6 +2,10 @@
 
 Required properties:
 - compatible: should contain "snps,dw-pcie" to identify the core.
+- reg: Should contain the configuration address space.
+- reg-names: Must be "config" for the PCIe configuration space.
+    (The old way of getting the configuration address space from "ranges"
+    is deprecated and should be avoided.)
 - #address-cells: set to <3>
 - #size-cells: set to <2>
 - device_type: set to "pci"

Documentation/devicetree/bindings/pci/ti-pci.txt

@@ -0,0 +1,59 @@
+TI PCI Controllers
+
+PCIe Designware Controller
+ - compatible: Should be "ti,dra7-pcie""
+ - reg : Two register ranges as listed in the reg-names property
+ - reg-names : The first entry must be "ti-conf" for the TI specific registers
+	       The second entry must be "rc-dbics" for the designware pcie
+	       registers
+	       The third entry must be "config" for the PCIe configuration space
+ - phys : list of PHY specifiers (used by generic PHY framework)
+ - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+	       number of PHYs as specified in *phys* property.
+ - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
+	       where <X> is the instance number of the pcie from the HW spec.
+ - interrupts : Two interrupt entries must be specified. The first one is for
+		main interrupt line and the second for MSI interrupt line.
+ - #address-cells,
+   #size-cells,
+   #interrupt-cells,
+   device_type,
+   ranges,
+   num-lanes,
+   interrupt-map-mask,
+   interrupt-map : as specified in ../designware-pcie.txt
+
+Example:
+axi {
+	compatible = "simple-bus";
+	#size-cells = <1>;
+	#address-cells = <1>;
+	ranges = <0x51000000 0x51000000 0x3000
+		  0x0	     0x20000000 0x10000000>;
+	pcie@51000000 {
+		compatible = "ti,dra7-pcie";
+		reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+		reg-names = "rc_dbics", "ti_conf", "config";
+		interrupts = <0 232 0x4>, <0 233 0x4>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x81000000 0 0          0x03000 0 0x00010000
+			  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+		#interrupt-cells = <1>;
+		num-lanes = <1>;
+		ti,hwmods = "pcie1";
+		phys = <&pcie1_phy>;
+		phy-names = "pcie-phy0";
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 1>,
+				<0 0 0 2 &pcie_intc 2>,
+				<0 0 0 3 &pcie_intc 3>,
+				<0 0 0 4 &pcie_intc 4>;
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+};

Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt

@@ -62,7 +62,7 @@ Example:
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		interrupts = <0 32 0x4>;
+		interrupts = <0 16 0x4>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&gsbi5_uart_default>;

Documentation/dma-buf-sharing.txt

@@ -56,10 +56,10 @@ The dma_buf buffer sharing API usage contains the following steps:
 				     size_t size, int flags,
 				     const char *exp_name)
 
-   If this succeeds, dma_buf_export allocates a dma_buf structure, and returns a
-   pointer to the same. It also associates an anonymous file with this buffer,
-   so it can be exported. On failure to allocate the dma_buf object, it returns
-   NULL.
+   If this succeeds, dma_buf_export_named allocates a dma_buf structure, and
+   returns a pointer to the same. It also associates an anonymous file with this
+   buffer, so it can be exported. On failure to allocate the dma_buf object,
+   it returns NULL.
 
    'exp_name' is the name of exporter - to facilitate information while
    debugging.
@@ -76,7 +76,7 @@ The dma_buf buffer sharing API usage contains the following steps:
    drivers and/or processes.
 
    Interface:
-      int dma_buf_fd(struct dma_buf *dmabuf)
+      int dma_buf_fd(struct dma_buf *dmabuf, int flags)
 
    This API installs an fd for the anonymous file associated with this buffer;
    returns either 'fd', or error.
@@ -157,7 +157,9 @@ to request use of buffer for allocation.
    "dma_buf->ops->" indirection from the users of this interface.
 
    In struct dma_buf_ops, unmap_dma_buf is defined as
-      void (*unmap_dma_buf)(struct dma_buf_attachment *, struct sg_table *);
+      void (*unmap_dma_buf)(struct dma_buf_attachment *,
+                            struct sg_table *,
+                            enum dma_data_direction);
 
    unmap_dma_buf signifies the end-of-DMA for the attachment provided. Like
    map_dma_buf, this API also must be implemented by the exporter.

Documentation/kdump/kdump.txt

@@ -18,7 +18,7 @@ memory image to a dump file on the local disk, or across the network to
 a remote system.
 
 Kdump and kexec are currently supported on the x86, x86_64, ppc64, ia64,
-and s390x architectures.
+s390x and arm architectures.
 
 When the system kernel boots, it reserves a small section of memory for
 the dump-capture kernel. This ensures that ongoing Direct Memory Access
@@ -112,7 +112,7 @@ There are two possible methods of using Kdump.
 2) Or use the system kernel binary itself as dump-capture kernel and there is
    no need to build a separate dump-capture kernel. This is possible
    only with the architectures which support a relocatable kernel. As
-   of today, i386, x86_64, ppc64 and ia64 architectures support relocatable
+   of today, i386, x86_64, ppc64, ia64 and arm architectures support relocatable
    kernel.
 
 Building a relocatable kernel is advantageous from the point of view that
@@ -241,6 +241,13 @@ Dump-capture kernel config options (Arch Dependent, ia64)
   kernel will be aligned to 64Mb, so if the start address is not then
   any space below the alignment point will be wasted.
 
+Dump-capture kernel config options (Arch Dependent, arm)
+----------------------------------------------------------
+
+-   To use a relocatable kernel,
+    Enable "AUTO_ZRELADDR" support under "Boot" options:
+
+    AUTO_ZRELADDR=y
 
 Extended crashkernel syntax
 ===========================
@@ -256,6 +263,10 @@ The syntax is:
     crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset]
     range=start-[end]
 
+Please note, on arm, the offset is required.
+    crashkernel=<range1>:<size1>[,<range2>:<size2>,...]@offset
+    range=start-[end]
+
     'start' is inclusive and 'end' is exclusive.
 
 For example:
@@ -296,6 +307,12 @@ Boot into System Kernel
    on the memory consumption of the kdump system. In general this is not
    dependent on the memory size of the production system.
 
+   On arm, use "crashkernel=Y@X". Note that the start address of the kernel
+   will be aligned to 128MiB (0x08000000), so if the start address is not then
+   any space below the alignment point may be overwritten by the dump-capture kernel,
+   which means it is possible that the vmcore is not that precise as expected.
+
+
 Load the Dump-capture Kernel
 ============================
 
@@ -315,7 +332,8 @@ For ia64:
 	- Use vmlinux or vmlinuz.gz
 For s390x:
 	- Use image or bzImage
-
+For arm:
+	- Use zImage
 
 If you are using a uncompressed vmlinux image then use following command
 to load dump-capture kernel.
@@ -331,6 +349,15 @@ to load dump-capture kernel.
    --initrd=<initrd-for-dump-capture-kernel> \
    --append="root=<root-dev> <arch-specific-options>"
 
+If you are using a compressed zImage, then use following command
+to load dump-capture kernel.
+
+   kexec --type zImage -p <dump-capture-kernel-bzImage> \
+   --initrd=<initrd-for-dump-capture-kernel> \
+   --dtb=<dtb-for-dump-capture-kernel> \
+   --append="root=<root-dev> <arch-specific-options>"
+
+
 Please note, that --args-linux does not need to be specified for ia64.
 It is planned to make this a no-op on that architecture, but for now
 it should be omitted
@@ -347,6 +374,9 @@ For ppc64:
 For s390x:
 	"1 maxcpus=1 cgroup_disable=memory"
 
+For arm:
+	"1 maxcpus=1 reset_devices"
+
 Notes on loading the dump-capture kernel:
 
 * By default, the ELF headers are stored in ELF64 format to support

Documentation/this_cpu_ops.txt

@@ -2,26 +2,26 @@ this_cpu operations
 -------------------
 
 this_cpu operations are a way of optimizing access to per cpu
-variables associated with the *currently* executing processor through
-the use of segment registers (or a dedicated register where the cpu
-permanently stored the beginning of the per cpu area for a specific
-processor).
+variables associated with the *currently* executing processor. This is
+done through the use of segment registers (or a dedicated register where
+the cpu permanently stored the beginning of the per cpu	area for a
+specific processor).
 
-The this_cpu operations add a per cpu variable offset to the processor
-specific percpu base and encode that operation in the instruction
+this_cpu operations add a per cpu variable offset to the processor
+specific per cpu base and encode that operation in the instruction
 operating on the per cpu variable.
 
-This means there are no atomicity issues between the calculation of
+This means that there are no atomicity issues between the calculation of
 the offset and the operation on the data. Therefore it is not
-necessary to disable preempt or interrupts to ensure that the
+necessary to disable preemption or interrupts to ensure that the
 processor is not changed between the calculation of the address and
 the operation on the data.
 
 Read-modify-write operations are of particular interest. Frequently
 processors have special lower latency instructions that can operate
-without the typical synchronization overhead but still provide some
-sort of relaxed atomicity guarantee. The x86 for example can execute
-RMV (Read Modify Write) instructions like inc/dec/cmpxchg without the
+without the typical synchronization overhead, but still provide some
+sort of relaxed atomicity guarantees. The x86, for example, can execute
+RMW (Read Modify Write) instructions like inc/dec/cmpxchg without the
 lock prefix and the associated latency penalty.
 
 Access to the variable without the lock prefix is not synchronized but
@@ -30,6 +30,38 @@ data specific to the currently executing processor. Only the current
 processor should be accessing that variable and therefore there are no
 concurrency issues with other processors in the system.
 
+Please note that accesses by remote processors to a per cpu area are
+exceptional situations and may impact performance and/or correctness
+(remote write operations) of local RMW operations via this_cpu_*.
+
+The main use of the this_cpu operations has been to optimize counter
+operations.
+
+The following this_cpu() operations with implied preemption protection
+are defined. These operations can be used without worrying about
+preemption and interrupts.
+
+	this_cpu_add()
+	this_cpu_read(pcp)
+	this_cpu_write(pcp, val)
+	this_cpu_add(pcp, val)
+	this_cpu_and(pcp, val)
+	this_cpu_or(pcp, val)
+	this_cpu_add_return(pcp, val)
+	this_cpu_xchg(pcp, nval)
+	this_cpu_cmpxchg(pcp, oval, nval)
+	this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
+	this_cpu_sub(pcp, val)
+	this_cpu_inc(pcp)
+	this_cpu_dec(pcp)
+	this_cpu_sub_return(pcp, val)
+	this_cpu_inc_return(pcp)
+	this_cpu_dec_return(pcp)
+
+
+Inner working of this_cpu operations
+------------------------------------
+
 On x86 the fs: or the gs: segment registers contain the base of the
 per cpu area. It is then possible to simply use the segment override
 to relocate a per cpu relative address to the proper per cpu area for
@@ -48,22 +80,21 @@ results in a single instruction
 	mov ax, gs:[x]
 
 instead of a sequence of calculation of the address and then a fetch
-from that address which occurs with the percpu operations. Before
+from that address which occurs with the per cpu operations. Before
 this_cpu_ops such sequence also required preempt disable/enable to
 prevent the kernel from moving the thread to a different processor
 while the calculation is performed.
 
-The main use of the this_cpu operations has been to optimize counter
-operations.
+Consider the following this_cpu operation:
 
 	this_cpu_inc(x)
 
-results in the following single instruction (no lock prefix!)
+The above results in the following single instruction (no lock prefix!)
 
 	inc gs:[x]
 
 instead of the following operations required if there is no segment
-register.
+register:
 
 	int *y;
 	int cpu;
@@ -73,10 +104,10 @@ register.
 	(*y)++;
 	put_cpu();
 
-Note that these operations can only be used on percpu data that is
+Note that these operations can only be used on per cpu data that is
 reserved for a specific processor. Without disabling preemption in the
 surrounding code this_cpu_inc() will only guarantee that one of the
-percpu counters is correctly incremented. However, there is no
+per cpu counters is correctly incremented. However, there is no
 guarantee that the OS will not move the process directly before or
 after the this_cpu instruction is executed. In general this means that
 the value of the individual counters for each processor are
@@ -86,9 +117,9 @@ that is of interest.
 Per cpu variables are used for performance reasons. Bouncing cache
 lines can be avoided if multiple processors concurrently go through
 the same code paths.  Since each processor has its own per cpu
-variables no concurrent cacheline updates take place. The price that
+variables no concurrent cache line updates take place. The price that
 has to be paid for this optimization is the need to add up the per cpu
-counters when the value of the counter is needed.
+counters when the value of a counter is needed.
 
 
 Special operations:
@@ -100,33 +131,39 @@ Takes the offset of a per cpu variable (&x !) and returns the address
 of the per cpu variable that belongs to the currently executing
 processor.  this_cpu_ptr avoids multiple steps that the common
 get_cpu/put_cpu sequence requires. No processor number is
-available. Instead the offset of the local per cpu area is simply
-added to the percpu offset.
+available. Instead, the offset of the local per cpu area is simply
+added to the per cpu offset.
 
+Note that this operation is usually used in a code segment when
+preemption has been disabled. The pointer is then used to
+access local per cpu data in a critical section. When preemption
+is re-enabled this pointer is usually no longer useful since it may
+no longer point to per cpu data of the current processor.
 
 
 Per cpu variables and offsets
 -----------------------------
 
-Per cpu variables have *offsets* to the beginning of the percpu
+Per cpu variables have *offsets* to the beginning of the per cpu
 area. They do not have addresses although they look like that in the
 code. Offsets cannot be directly dereferenced. The offset must be
-added to a base pointer of a percpu area of a processor in order to
+added to a base pointer of a per cpu area of a processor in order to
 form a valid address.
 
 Therefore the use of x or &x outside of the context of per cpu
 operations is invalid and will generally be treated like a NULL
 pointer dereference.
 
-In the context of per cpu operations
+	DEFINE_PER_CPU(int, x);
 
-	x is a per cpu variable. Most this_cpu operations take a cpu
-	variable.
+In the context of per cpu operations the above implies that x is a per
+cpu variable. Most this_cpu operations take a cpu variable.
 
-	&x is the *offset* a per cpu variable. this_cpu_ptr() takes
-	the offset of a per cpu variable which makes this look a bit
-	strange.
+	int __percpu *p = &x;
 
+&x and hence p is the *offset* of a per cpu variable. this_cpu_ptr()
+takes the offset of a per cpu variable which makes this look a bit
+strange.
 
 
 Operations on a field of a per cpu structure
@@ -152,7 +189,7 @@ If we have an offset to struct s:
 
 	struct s __percpu *ps = &p;
 
-	z = this_cpu_dec(ps->m);
+	this_cpu_dec(ps->m);
 
 	z = this_cpu_inc_return(ps->n);
 
@@ -172,29 +209,52 @@ if we do not make use of this_cpu ops later to manipulate fields:
 Variants of this_cpu ops
 -------------------------
 
-this_cpu ops are interrupt safe. Some architecture do not support
+this_cpu ops are interrupt safe. Some architectures do not support
 these per cpu local operations. In that case the operation must be
 replaced by code that disables interrupts, then does the operations
-that are guaranteed to be atomic and then reenable interrupts. Doing
+that are guaranteed to be atomic and then re-enable interrupts. Doing
 so is expensive. If there are other reasons why the scheduler cannot
 change the processor we are executing on then there is no reason to
-disable interrupts. For that purpose the __this_cpu operations are
-provided. For example.
+disable interrupts. For that purpose the following __this_cpu operations
+are provided.
 
-	__this_cpu_inc(x);
+These operations have no guarantee against concurrent interrupts or
+preemption. If a per cpu variable is not used in an interrupt context
+and the scheduler cannot preempt, then they are safe. If any interrupts
+still occur while an operation is in progress and if the interrupt too
+modifies the variable, then RMW actions can not be guaranteed to be
+safe.
 
-Will increment x and will not fallback to code that disables
+	__this_cpu_add()
+	__this_cpu_read(pcp)
+	__this_cpu_write(pcp, val)
+	__this_cpu_add(pcp, val)
+	__this_cpu_and(pcp, val)
+	__this_cpu_or(pcp, val)
+	__this_cpu_add_return(pcp, val)
+	__this_cpu_xchg(pcp, nval)
+	__this_cpu_cmpxchg(pcp, oval, nval)
+	__this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
+	__this_cpu_sub(pcp, val)
+	__this_cpu_inc(pcp)
+	__this_cpu_dec(pcp)
+	__this_cpu_sub_return(pcp, val)
+	__this_cpu_inc_return(pcp)
+	__this_cpu_dec_return(pcp)
+
+
+Will increment x and will not fall-back to code that disables
 interrupts on platforms that cannot accomplish atomicity through
 address relocation and a Read-Modify-Write operation in the same
 instruction.
 
 
-
 &this_cpu_ptr(pp)->n vs this_cpu_ptr(&pp->n)
 --------------------------------------------
 
 The first operation takes the offset and forms an address and then
-adds the offset of the n field.
+adds the offset of the n field. This may result in two add
+instructions emitted by the compiler.
 
 The second one first adds the two offsets and then does the
 relocation.  IMHO the second form looks cleaner and has an easier time
@@ -202,4 +262,73 @@ with (). The second form also is consistent with the way
 this_cpu_read() and friends are used.
 
 
-Christoph Lameter, April 3rd, 2013
+Remote access to per cpu data
+------------------------------
+
+Per cpu data structures are designed to be used by one cpu exclusively.
+If you use the variables as intended, this_cpu_ops() are guaranteed to
+be "atomic" as no other CPU has access to these data structures.
+
+There are special cases where you might need to access per cpu data
+structures remotely. It is usually safe to do a remote read access
+and that is frequently done to summarize counters. Remote write access
+something which could be problematic because this_cpu ops do not
+have lock semantics. A remote write may interfere with a this_cpu
+RMW operation.
+
+Remote write accesses to percpu data structures are highly discouraged
+unless absolutely necessary. Please consider using an IPI to wake up
+the remote CPU and perform the update to its per cpu area.
+
+To access per-cpu data structure remotely, typically the per_cpu_ptr()
+function is used:
+
+
+	DEFINE_PER_CPU(struct data, datap);
+
+	struct data *p = per_cpu_ptr(&datap, cpu);
+
+This makes it explicit that we are getting ready to access a percpu
+area remotely.
+
+You can also do the following to convert the datap offset to an address
+
+	struct data *p = this_cpu_ptr(&datap);
+
+but, passing of pointers calculated via this_cpu_ptr to other cpus is
+unusual and should be avoided.
+
+Remote access are typically only for reading the status of another cpus
+per cpu data. Write accesses can cause unique problems due to the
+relaxed synchronization requirements for this_cpu operations.
+
+One example that illustrates some concerns with write operations is
+the following scenario that occurs because two per cpu variables
+share a cache-line but the relaxed synchronization is applied to
+only one process updating the cache-line.
+
+Consider the following example
+
+
+	struct test {
+		atomic_t a;
+		int b;
+	};
+
+	DEFINE_PER_CPU(struct test, onecacheline);
+
+There is some concern about what would happen if the field 'a' is updated
+remotely from one processor and the local processor would use this_cpu ops
+to update field b. Care should be taken that such simultaneous accesses to
+data within the same cache line are avoided. Also costly synchronization
+may be necessary. IPIs are generally recommended in such scenarios instead
+of a remote write to the per cpu area of another processor.
+
+Even in cases where the remote writes are rare, please bear in
+mind that a remote write will evict the cache line from the processor
+that most likely will access it. If the processor wakes up and finds a
+missing local cache line of a per cpu area, its performance and hence
+the wake up times will be affected.
+
+Christoph Lameter, August 4th, 2014
+Pranith Kumar, Aug 2nd, 2014

Documentation/x86/tlb.txt

@@ -35,7 +35,7 @@ invlpg instruction (or instructions _near_ it) show up high in
 profiles.  If you believe that individual invalidations being
 called too often, you can lower the tunable:
 
-	/sys/debug/kernel/x86/tlb_single_page_flush_ceiling
+	/sys/kernel/debug/x86/tlb_single_page_flush_ceiling
 
 This will cause us to do the global flush for more cases.
 Lowering it to 0 will disable the use of the individual flushes.

MAINTAINERS

@@ -1277,9 +1277,15 @@ F:	drivers/scsi/arm/
 ARM/Rockchip SoC support
 M:	Heiko Stuebner <heiko@sntech.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-rockchip@lists.infradead.org
 S:	Maintained
+F:	arch/arm/boot/dts/rk3*
 F:	arch/arm/mach-rockchip/
+F:	drivers/clk/rockchip/
+F:	drivers/i2c/busses/i2c-rk3x.c
 F:	drivers/*/*rockchip*
+F:	drivers/*/*/*rockchip*
+F:	sound/soc/rockchip/
 
 ARM/SAMSUNG ARM ARCHITECTURES
 M:	Ben Dooks <ben-linux@fluff.org>
@@ -1843,6 +1849,12 @@ S:	Orphan
 F:	Documentation/filesystems/befs.txt
 F:	fs/befs/
 
+BECKHOFF CX5020 ETHERCAT MASTER DRIVER
+M: Dariusz Marcinkiewicz <reksio@newterm.pl>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/ethernet/ec_bhf.c
+
 BFS FILE SYSTEM
 M:	"Tigran A. Aivazian" <tigran@aivazian.fsnet.co.uk>
 S:	Maintained
@@ -2059,7 +2071,7 @@ S:	Supported
 F:	drivers/scsi/bnx2i/
 
 BROADCOM KONA GPIO DRIVER
-M:	Markus Mayer <markus.mayer@linaro.org>
+M:	Ray Jui <rjui@broadcom.com>
 L:	bcm-kernel-feedback-list@broadcom.com
 S:	Supported
 F:	drivers/gpio/gpio-bcm-kona.c
@@ -3115,6 +3127,17 @@ F:	include/linux/host1x.h
 F:	include/uapi/drm/tegra_drm.h
 F:	Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
 
+DRM DRIVERS FOR RENESAS
+M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+L:	dri-devel@lists.freedesktop.org
+L:	linux-sh@vger.kernel.org
+T:	git git://people.freedesktop.org/~airlied/linux
+S:	Supported
+F:	drivers/gpu/drm/rcar-du/
+F:	drivers/gpu/drm/shmobile/
+F:	include/linux/platform_data/rcar-du.h
+F:	include/linux/platform_data/shmob_drm.h
+
 DSBR100 USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -3843,10 +3866,13 @@ F:	drivers/tty/serial/ucc_uart.c
 
 FREESCALE SOC SOUND DRIVERS
 M:	Timur Tabi <timur@tabi.org>
+M:	Nicolin Chen <nicoleotsuka@gmail.com>
+M:	Xiubo Li <Li.Xiubo@freescale.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	sound/soc/fsl/fsl*
+F:	sound/soc/fsl/imx*
 F:	sound/soc/fsl/mpc8610_hpcd.c
 
 FREEVXFS FILESYSTEM
@@ -4446,6 +4472,13 @@ F:	include/linux/i2c-*.h
 F:	include/uapi/linux/i2c.h
 F:	include/uapi/linux/i2c-*.h
 
+I2C ACPI SUPPORT
+M:	Mika Westerberg <mika.westerberg@linux.intel.com>
+L:	linux-i2c@vger.kernel.org
+L:	linux-acpi@vger.kernel.org
+S:	Maintained
+F:	drivers/i2c/i2c-acpi.c
+
 I2C-TAOS-EVM DRIVER
 M:	Jean Delvare <jdelvare@suse.de>
 L:	linux-i2c@vger.kernel.org
@@ -5972,6 +6005,12 @@ T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/radio/radio-mr800.c
 
+MRF24J40 IEEE 802.15.4 RADIO DRIVER
+M:	Alan Ott <alan@signal11.us>
+L:	linux-wpan@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ieee802154/mrf24j40.c
+
 MSI LAPTOP SUPPORT
 M:	"Lee, Chun-Yi" <jlee@suse.com>
 L:	platform-driver-x86@vger.kernel.org
@@ -6858,6 +6897,14 @@ S:	Supported
 F:	Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
 F:	drivers/pci/host/pci-tegra.c
 
+PCI DRIVER FOR TI DRA7XX
+M:	Kishon Vijay Abraham I <kishon@ti.com>
+L:	linux-omap@vger.kernel.org
+L:	linux-pci@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/pci/ti-pci.txt
+F:	drivers/pci/host/pci-dra7xx.c
+
 PCI DRIVER FOR RENESAS R-CAR
 M:	Simon Horman <horms@verge.net.au>
 L:	linux-pci@vger.kernel.org
@@ -9515,6 +9562,14 @@ S:	Maintained
 F:	Documentation/usb/ohci.txt
 F:	drivers/usb/host/ohci*
 
+USB OVER IP DRIVER
+M:	Valentina Manea <valentina.manea.m@gmail.com>
+M:	Shuah Khan <shuah.kh@samsung.com>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	drivers/usb/usbip/
+F:	tools/usb/usbip/
+
 USB PEGASUS DRIVER
 M:	Petko Manolov <petkan@nucleusys.com>
 L:	linux-usb@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 17
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Shuffling Zombie Juror
 
 # *DOCUMENTATION*

arch/alpha/include/asm/io.h

@@ -500,10 +500,14 @@ extern inline void writeq(u64 b, volatile void __iomem *addr)
 #define outb_p		outb
 #define outw_p		outw
 #define outl_p		outl
-#define readb_relaxed(addr) __raw_readb(addr)
-#define readw_relaxed(addr) __raw_readw(addr)
-#define readl_relaxed(addr) __raw_readl(addr)
-#define readq_relaxed(addr) __raw_readq(addr)
+#define readb_relaxed(addr)	__raw_readb(addr)
+#define readw_relaxed(addr)	__raw_readw(addr)
+#define readl_relaxed(addr)	__raw_readl(addr)
+#define readq_relaxed(addr)	__raw_readq(addr)
+#define writeb_relaxed(b, addr)	__raw_writeb(b, addr)
+#define writew_relaxed(b, addr)	__raw_writew(b, addr)
+#define writel_relaxed(b, addr)	__raw_writel(b, addr)
+#define writeq_relaxed(b, addr)	__raw_writeq(b, addr)
 
 #define mmiowb()
 

arch/alpha/include/asm/unistd.h

@@ -3,7 +3,7 @@
 
 #include <uapi/asm/unistd.h>
 
-#define NR_SYSCALLS			508
+#define NR_SYSCALLS			511
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_STAT64

arch/alpha/include/uapi/asm/unistd.h

@@ -469,5 +469,8 @@
 #define __NR_process_vm_writev		505
 #define __NR_kcmp			506
 #define __NR_finit_module		507
+#define __NR_sched_setattr		508
+#define __NR_sched_getattr		509
+#define __NR_renameat2			510
 
 #endif /* _UAPI_ALPHA_UNISTD_H */

arch/alpha/kernel/systbls.S

@@ -526,6 +526,9 @@ sys_call_table:
 	.quad sys_process_vm_writev		/* 505 */
 	.quad sys_kcmp
 	.quad sys_finit_module
+	.quad sys_sched_setattr
+	.quad sys_sched_getattr
+	.quad sys_renameat2			/* 510 */
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object

arch/arc/mm/cache_arc700.c

@@ -581,6 +581,7 @@ void flush_icache_range(unsigned long kstart, unsigned long kend)
 		tot_sz -= sz;
 	}
 }
+EXPORT_SYMBOL(flush_icache_range);
 
 /*
  * General purpose helper to make I and D cache lines consistent.

arch/arm/Kconfig

@@ -1983,8 +1983,6 @@ config XIP_PHYS_ADDR
 config KEXEC
 	bool "Kexec system call (EXPERIMENTAL)"
 	depends on (!SMP || PM_SLEEP_SMP)
-	select CRYPTO
-	select CRYPTO_SHA256
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/arm/boot/dts/dra7.dtsi

@@ -245,7 +245,7 @@ gpio1: gpio@4ae10000 {
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio2: gpio@48055000 {
@@ -256,7 +256,7 @@ gpio2: gpio@48055000 {
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio3: gpio@48057000 {
@@ -267,7 +267,7 @@ gpio3: gpio@48057000 {
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio4: gpio@48059000 {
@@ -278,7 +278,7 @@ gpio4: gpio@48059000 {
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio5: gpio@4805b000 {
@@ -289,7 +289,7 @@ gpio5: gpio@4805b000 {
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio6: gpio@4805d000 {
@@ -300,7 +300,7 @@ gpio6: gpio@4805d000 {
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio7: gpio@48051000 {
@@ -311,7 +311,7 @@ gpio7: gpio@48051000 {
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio8: gpio@48053000 {
@@ -322,7 +322,7 @@ gpio8: gpio@48053000 {
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		uart1: serial@4806a000 {

arch/arm/boot/dts/exynos4412-odroid-common.dtsi

@@ -134,6 +134,8 @@ xusbxti {
 	i2c@13860000 {
 		pinctrl-0 = <&i2c0_bus>;
 		pinctrl-names = "default";
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <400000>;
 		status = "okay";
 
 		usb3503: usb3503@08 {
@@ -148,6 +150,10 @@ usb3503: usb3503@08 {
 
 		max77686: pmic@09 {
 			compatible = "maxim,max77686";
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77686_irq>;
 			reg = <0x09>;
 			#clock-cells = <1>;
 
@@ -368,4 +374,11 @@ gpio_power_key: power_key {
 		samsung,pins = "gpx1-3";
 		samsung,pin-pud = <0>;
 	};
+
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
 };

arch/arm/boot/dts/imx53-qsrb.dts

@@ -28,6 +28,12 @@ MX53_PAD_CSI0_DAT8__I2C1_SDA      0x400001ec
 				MX53_PAD_CSI0_DAT9__I2C1_SCL      0x400001ec
 			>;
 		};
+
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT5__GPIO5_23	0x1e4 /* IRQ */
+			>;
+		};
 	};
 };
 
@@ -38,6 +44,8 @@ &i2c1 {
 
 	pmic: mc34708@8 {
 		compatible = "fsl,mc34708";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <23 0x8>;

arch/arm/boot/dts/imx53.dtsi

@@ -731,7 +731,7 @@ vpu: vpu@63ff4000 {
 				compatible = "fsl,imx53-vpu";
 				reg = <0x63ff4000 0x1000>;
 				interrupts = <9>;
-				clocks = <&clks IMX5_CLK_VPU_GATE>,
+				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
 				         <&clks IMX5_CLK_VPU_GATE>;
 				clock-names = "per", "ahb";
 				resets = <&src 1>;

arch/arm/boot/dts/imx6dl-hummingboard.dts

@@ -58,7 +58,7 @@ reg_usbotg_vbus: usb-otg-vbus {
 
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
+		model = "On-board SPDIF";
 		/* IMX6 doesn't implement this yet */
 		spdif-controller = <&spdif>;
 		spdif-out;
@@ -181,11 +181,13 @@ &spdif {
 };
 
 &usbh1 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh1_vbus>;
 	status = "okay";
 };
 
 &usbotg {
+	disable-over-current;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
 	vbus-supply = <&reg_usbotg_vbus>;

arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts

@@ -119,7 +119,7 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 23 0>;
+	phy-reset-gpios = <&gpio1 25 0>;
 	phy-supply = <&vgen2_1v2_eth>;
 	status = "okay";
 };
@@ -339,6 +339,7 @@ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			>;
 		};

arch/arm/boot/dts/imx6qdl-cubox-i.dtsi

@@ -61,7 +61,7 @@ reg_usbotg_vbus: usb-otg-vbus {
 
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
+		model = "Integrated SPDIF";
 		/* IMX6 doesn't implement this yet */
 		spdif-controller = <&spdif>;
 		spdif-out;
@@ -130,16 +130,23 @@ pinctrl_cubox_i_spdif: cubox-i-spdif {
 			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
 		};
 
+		pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
+			fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
+		};
+
 		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
 			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
 		};
 
-		pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id {
+		pinctrl_cubox_i_usbotg: cubox-i-usbotg {
 			/*
-			 * The Cubox-i pulls this low, but as it's pointless
+			 * The Cubox-i pulls ID low, but as it's pointless
 			 * leaving it as a pull-up, even if it is just 10uA.
 			 */
-			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+			>;
 		};
 
 		pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
@@ -173,13 +180,15 @@ &spdif {
 };
 
 &usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
 	vbus-supply = <&reg_usbh1_vbus>;
 	status = "okay";
 };
 
 &usbotg {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>;
+	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
 	vbus-supply = <&reg_usbotg_vbus>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi

@@ -17,7 +17,7 @@ &iomuxc {
 	enet {
 		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
 			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
 				/* AR8035 reset */
 				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0

arch/arm/boot/dts/imx6sx-pinfunc.h

@@ -78,7 +78,7 @@
 #define MX6SX_PAD_GPIO1_IO07__USDHC2_WP                           0x0030 0x0378 0x0870 0x1 0x1
 #define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO                          0x0030 0x0378 0x0770 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK                         0x0030 0x0378 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B                         0x0030 0x0378 0x082C 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B                         0x0030 0x0378 0x0000 0x4 0x0
 #define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7                          0x0030 0x0378 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET                     0x0030 0x0378 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT                           0x0030 0x0378 0x0000 0x7 0x0
@@ -96,7 +96,7 @@
 #define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B                        0x0038 0x0380 0x0000 0x1 0x0
 #define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1                    0x0038 0x0380 0x0820 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO09__CCM_OUT0                            0x0038 0x0380 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B                         0x0038 0x0380 0x0834 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B                         0x0038 0x0380 0x0000 0x4 0x0
 #define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9                          0x0038 0x0380 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT                        0x0038 0x0380 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4                   0x0038 0x0380 0x0000 0x7 0x0
@@ -213,7 +213,7 @@
 #define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2                        0x0068 0x03B0 0x079C 0x1 0x1
 #define MX6SX_PAD_CSI_DATA07__I2C4_SDA                            0x0068 0x03B0 0x07C4 0x2 0x2
 #define MX6SX_PAD_CSI_DATA07__KPP_ROW_7                           0x0068 0x03B0 0x07DC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B                         0x0068 0x03B0 0x0854 0x4 0x1
+#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B                         0x0068 0x03B0 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21                         0x0068 0x03B0 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16                        0x0068 0x03B0 0x0000 0x6 0x0
 #define MX6SX_PAD_CSI_DATA07__DCIC1_OUT                           0x0068 0x03B0 0x0000 0x7 0x0
@@ -254,7 +254,7 @@
 #define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC                           0x0078 0x03C0 0x0708 0x0 0x0
 #define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0                         0x0078 0x03C0 0x07A4 0x1 0x1
 #define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD                      0x0078 0x03C0 0x0674 0x2 0x1
-#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B                          0x0078 0x03C0 0x0844 0x3 0x3
+#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B                          0x0078 0x03C0 0x0000 0x3 0x0
 #define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT                            0x0078 0x03C0 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25                          0x0078 0x03C0 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24                         0x0078 0x03C0 0x0000 0x6 0x0
@@ -352,7 +352,7 @@
 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK                      0x00A0 0x03E8 0x0000 0x0 0x0
 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                    0x00A0 0x03E8 0x076C 0x1 0x1
 #define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA                          0x00A0 0x03E8 0x07BC 0x2 0x1
-#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B                       0x00A0 0x03E8 0x082C 0x3 0x3
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B                       0x00A0 0x03E8 0x0000 0x3 0x0
 #define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK                           0x00A0 0x03E8 0x07E8 0x4 0x1
 #define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9                        0x00A0 0x03E8 0x0000 0x5 0x0
 #define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR                      0x00A0 0x03E8 0x0000 0x6 0x0
@@ -404,7 +404,7 @@
 #define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK                          0x00B4 0x03FC 0x0808 0x7 0x0
 #define MX6SX_PAD_KEY_ROW0__KPP_ROW_0                             0x00B8 0x0400 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_ROW0__USDHC3_WP                             0x00B8 0x0400 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B                           0x00B8 0x0400 0x0854 0x2 0x3
+#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B                           0x00B8 0x0400 0x0000 0x2 0x0
 #define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI                           0x00B8 0x0400 0x0718 0x3 0x0
 #define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD                       0x00B8 0x0400 0x0660 0x4 0x0
 #define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15                           0x00B8 0x0400 0x0000 0x5 0x0
@@ -423,7 +423,7 @@
 #define MX6SX_PAD_KEY_ROW1__M4_NMI                                0x00BC 0x0404 0x0000 0x8 0x0
 #define MX6SX_PAD_KEY_ROW2__KPP_ROW_2                             0x00C0 0x0408 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_ROW2__USDHC4_WP                             0x00C0 0x0408 0x0878 0x1 0x1
-#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B                           0x00C0 0x0408 0x084C 0x2 0x3
+#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B                           0x00C0 0x0408 0x0000 0x2 0x0
 #define MX6SX_PAD_KEY_ROW2__CAN1_RX                               0x00C0 0x0408 0x068C 0x3 0x1
 #define MX6SX_PAD_KEY_ROW2__CANFD_RX1                             0x00C0 0x0408 0x0694 0x4 0x1
 #define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17                           0x00C0 0x0408 0x0000 0x5 0x0
@@ -815,7 +815,7 @@
 #define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05                     0x0164 0x04AC 0x0000 0x0 0x0
 #define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5                       0x0164 0x04AC 0x0000 0x1 0x0
 #define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS                        0x0164 0x04AC 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B                        0x0164 0x04AC 0x083C 0x3 0x1
+#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B                        0x0164 0x04AC 0x0000 0x3 0x0
 #define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC                    0x0164 0x04AC 0x064C 0x4 0x0
 #define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9                         0x0164 0x04AC 0x0000 0x5 0x0
 #define MX6SX_PAD_NAND_DATA05__WEIM_AD_5                          0x0164 0x04AC 0x0000 0x6 0x0
@@ -957,7 +957,7 @@
 #define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12                    0x019C 0x04E4 0x0000 0x7 0x0
 #define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3                   0x019C 0x04E4 0x0000 0x9 0x0
 #define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0                    0x01A0 0x04E8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B                       0x01A0 0x04E8 0x083C 0x1 0x4
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B                       0x01A0 0x04E8 0x0000 0x1 0x0
 #define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI                       0x01A0 0x04E8 0x0738 0x2 0x1
 #define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS                        0x01A0 0x04E8 0x0778 0x3 0x2
 #define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22                      0x01A0 0x04E8 0x06F4 0x4 0x1
@@ -1236,7 +1236,7 @@
 #define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS                     0x0230 0x0578 0x0670 0x1 0x1
 #define MX6SX_PAD_SD1_DATA2__PWM3_OUT                             0x0230 0x0578 0x0000 0x2 0x0
 #define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2                         0x0230 0x0578 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B                          0x0230 0x0578 0x0834 0x4 0x2
+#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B                          0x0230 0x0578 0x0000 0x4 0x0
 #define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4                           0x0230 0x0578 0x0000 0x5 0x0
 #define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY                           0x0230 0x0578 0x0000 0x6 0x0
 #define MX6SX_PAD_SD1_DATA2__CCM_OUT0                             0x0230 0x0578 0x0000 0x7 0x0
@@ -1315,7 +1315,7 @@
 #define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3                 0x024C 0x0594 0x0000 0x8 0x0
 #define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31                        0x024C 0x0594 0x0000 0x9 0x0
 #define MX6SX_PAD_SD3_CLK__USDHC3_CLK                             0x0250 0x0598 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_CLK__UART4_CTS_B                            0x0250 0x0598 0x0844 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_CTS_B                            0x0250 0x0598 0x0000 0x1 0x0
 #define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK                            0x0250 0x0598 0x0740 0x2 0x0
 #define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS                       0x0250 0x0598 0x0680 0x3 0x0
 #define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC                           0x0250 0x0598 0x0000 0x4 0x0
@@ -1409,7 +1409,7 @@
 #define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7                         0x0274 0x05BC 0x0000 0x0 0x0
 #define MX6SX_PAD_SD3_DATA7__CAN1_RX                              0x0274 0x05BC 0x068C 0x1 0x0
 #define MX6SX_PAD_SD3_DATA7__CANFD_RX1                            0x0274 0x05BC 0x0694 0x2 0x0
-#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B                          0x0274 0x05BC 0x083C 0x3 0x3
+#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B                          0x0274 0x05BC 0x0000 0x3 0x0
 #define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5                        0x0274 0x05BC 0x0000 0x4 0x0
 #define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9                           0x0274 0x05BC 0x0000 0x5 0x0
 #define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN                 0x0274 0x05BC 0x0000 0x6 0x0
@@ -1510,7 +1510,7 @@
 #define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1           0x0298 0x05E0 0x0000 0x9 0x0
 #define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7                         0x029C 0x05E4 0x0000 0x0 0x0
 #define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08                       0x029C 0x05E4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B                          0x029C 0x05E4 0x084C 0x2 0x1
+#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B                          0x029C 0x05E4 0x0000 0x2 0x0
 #define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0                           0x029C 0x05E4 0x073C 0x3 0x0
 #define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15                       0x029C 0x05E4 0x0000 0x4 0x0
 #define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21                          0x029C 0x05E4 0x0000 0x5 0x0

arch/arm/boot/dts/omap3-beagle.dts

@@ -292,6 +292,7 @@ &twl_gpio {
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 };
 
 &gpio1 {

arch/arm/boot/dts/omap3-n900.dts

@@ -353,7 +353,7 @@ twl_audio: audio {
 	};
 
 	twl_power: power {
-		compatible = "ti,twl4030-power-n900";
+		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
 		ti,use_poweroff;
 	};
 };

arch/arm/boot/dts/omap3430-sdp.dts

@@ -107,7 +107,7 @@ nand@1,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <1 0 0x08000000>;
-		ti,nand-ecc-opt = "ham1";
+		ti,nand-ecc-opt = "sw";
 		nand-bus-width = <8>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <36>;

arch/arm/boot/dts/omap54xx-clocks.dtsi

@@ -367,10 +367,12 @@ usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
 
 	l3_iclk_div: l3_iclk_div {
 		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
+		compatible = "ti,divider-clock";
+		ti,max-div = <2>;
+		ti,bit-shift = <4>;
+		reg = <0x100>;
 		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
+		ti,index-power-of-two;
 	};
 
 	gpu_l3_iclk: gpu_l3_iclk {
@@ -383,10 +385,12 @@ gpu_l3_iclk: gpu_l3_iclk {
 
 	l4_root_clk_div: l4_root_clk_div {
 		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
+		compatible = "ti,divider-clock";
+		ti,max-div = <2>;
+		ti,bit-shift = <8>;
+		reg = <0x100>;
 		clocks = <&l3_iclk_div>;
-		clock-mult = <1>;
-		clock-div = <1>;
+		ti,index-power-of-two;
 	};
 
 	slimbus1_slimbus_clk: slimbus1_slimbus_clk {

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -275,11 +275,6 @@ msiof0_pins: spi1 {
 		renesas,function = "msiof0";
 	};
 
-	i2c6_pins: i2c6 {
-		renesas,groups = "i2c6";
-		renesas,function = "i2c6";
-	};
-
 	usb0_pins: usb0 {
 		renesas,groups = "usb0";
 		renesas,function = "usb0";
@@ -420,8 +415,6 @@ eeprom@50 {
 };
 
 &i2c6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c6_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
 

arch/arm/boot/dts/rk3066a-bqcurie2.dts

@@ -149,6 +149,8 @@ vcc28_cif: regulator@12 {
 &mmc0 { /* sdmmc */
 	num-slots = <1>;
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
 	vmmc-supply = <&vcc_sd0>;
 
 	slot@0 {

arch/arm/boot/dts/rk3188-radxarock.dts

@@ -179,6 +179,8 @@ vcc28: REG12 {
 &mmc0 {
 	num-slots = <1>;
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
 	vmmc-supply = <&vcc_sd0>;
 
 	slot@0 {

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -660,6 +660,8 @@ i2c0: i2c@01c2ac00 {
 			clock-frequency = <100000>;
 			resets = <&apb2_rst 0>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		i2c1: i2c@01c2b000 {
@@ -670,6 +672,8 @@ i2c1: i2c@01c2b000 {
 			clock-frequency = <100000>;
 			resets = <&apb2_rst 1>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		i2c2: i2c@01c2b400 {
@@ -680,6 +684,8 @@ i2c2: i2c@01c2b400 {
 			clock-frequency = <100000>;
 			resets = <&apb2_rst 2>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		i2c3: i2c@01c2b800 {
@@ -690,6 +696,8 @@ i2c3: i2c@01c2b800 {
 			clock-frequency = <100000>;
 			resets = <&apb2_rst 3>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		gmac: ethernet@01c30000 {

arch/arm/boot/dts/tegra30-apalis.dtsi

@@ -423,7 +423,7 @@ pmic: tps65911@2d {
 			vcc4-supply = <&sys_3v3_reg>;
 			vcc5-supply = <&sys_3v3_reg>;
 			vcc6-supply = <&vio_reg>;
-			vcc7-supply = <&sys_5v0_reg>;
+			vcc7-supply = <&charge_pump_5v0_reg>;
 			vccio-supply = <&sys_3v3_reg>;
 
 			regulators {
@@ -674,5 +674,14 @@ sys_3v3_reg: regulator@100 {
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
+
+		charge_pump_5v0_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
 	};
 };

arch/arm/boot/dts/tegra30-colibri.dtsi

@@ -201,7 +201,7 @@ pmic: tps65911@2d {
 			vcc4-supply = <&sys_3v3_reg>;
 			vcc5-supply = <&sys_3v3_reg>;
 			vcc6-supply = <&vio_reg>;
-			vcc7-supply = <&sys_5v0_reg>;
+			vcc7-supply = <&charge_pump_5v0_reg>;
 			vccio-supply = <&sys_3v3_reg>;
 
 			regulators {
@@ -373,5 +373,14 @@ sys_3v3_reg: regulator@100 {
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
+
+		charge_pump_5v0_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
 	};
 };

arch/arm/boot/dts/twl6030.dtsi

@@ -83,10 +83,6 @@ v2v1: regulator-v2v1 {
 		regulator-always-on;
 	};
 
-	clk32kg: regulator-clk32kg {
-		compatible = "ti,twl6030-clk32kg";
-	};
-
 	twl_usb_comparator: usb-comparator {
 		compatible = "ti,twl6030-usb";
 		interrupts = <4>, <10>;

arch/arm/boot/dts/vf610-twr.dts

@@ -168,7 +168,7 @@ VF610_PAD_PTB22__DSPI0_SCK		0x1182
 		};
 
 		pinctrl_esdhc1: esdhc1grp {
-			fsl,fsl,pins = <
+			fsl,pins = <
 				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
 				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
 				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef

arch/arm/include/asm/cacheflush.h

@@ -472,7 +472,6 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size)
 	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR \n\t" \
 	"isb	\n\t" \
 	"bl	v7_flush_dcache_"__stringify(level)" \n\t" \
-	"clrex	\n\t" \
 	"mrc	p15, 0, r0, c1, c0, 1	@ get ACTLR \n\t" \
 	"bic	r0, r0, #(1 << 6)	@ disable local coherency \n\t" \
 	"mcr	p15, 0, r0, c1, c0, 1	@ set ACTLR \n\t" \

arch/arm/include/asm/cputype.h

@@ -74,6 +74,7 @@
 #define ARM_CPU_PART_CORTEX_A12		0x4100c0d0
 #define ARM_CPU_PART_CORTEX_A17		0x4100c0e0
 #define ARM_CPU_PART_CORTEX_A15		0x4100c0f0
+#define ARM_CPU_PART_MASK		0xff00fff0
 
 #define ARM_CPU_XSCALE_ARCH_MASK	0xe000
 #define ARM_CPU_XSCALE_ARCH_V1		0x2000
@@ -179,7 +180,7 @@ static inline unsigned int __attribute_const__ read_cpuid_implementor(void)
  */
 static inline unsigned int __attribute_const__ read_cpuid_part(void)
 {
-	return read_cpuid_id() & 0xff00fff0;
+	return read_cpuid_id() & ARM_CPU_PART_MASK;
 }
 
 static inline unsigned int __attribute_const__ __deprecated read_cpuid_part_number(void)

arch/arm/include/asm/elf.h

@@ -50,6 +50,7 @@ typedef struct user_fp elf_fpregset_t;
 #define R_ARM_ABS32		2
 #define R_ARM_CALL		28
 #define R_ARM_JUMP24		29
+#define R_ARM_TARGET1		38
 #define R_ARM_V4BX		40
 #define R_ARM_PREL31		42
 #define R_ARM_MOVW_ABS_NC	43

arch/arm/include/asm/smp_plat.h

@@ -8,6 +8,7 @@
 #include <linux/cpumask.h>
 #include <linux/err.h>
 
+#include <asm/cpu.h>
 #include <asm/cputype.h>
 
 /*
@@ -25,6 +26,20 @@ static inline bool is_smp(void)
 #endif
 }
 
+/**
+ * smp_cpuid_part() - return part id for a given cpu
+ * @cpu:	logical cpu id.
+ *
+ * Return: part id of logical cpu passed as argument.
+ */
+static inline unsigned int smp_cpuid_part(int cpu)
+{
+	struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpu);
+
+	return is_smp() ? cpu_info->cpuid & ARM_CPU_PART_MASK :
+			  read_cpuid_part();
+}
+
 /* all SMP configurations have the extended CPUID registers */
 #ifndef CONFIG_MMU
 #define tlb_ops_need_broadcast()	0

arch/arm/kernel/entry-header.S

@@ -208,26 +208,21 @@
 #endif
 	.endif
 	msr	spsr_cxsf, \rpsr
-#if defined(CONFIG_CPU_V6)
-	ldr	r0, [sp]
-	strex	r1, r2, [sp]			@ clear the exclusive monitor
-	ldmib	sp, {r1 - pc}^			@ load r1 - pc, cpsr
-#elif defined(CONFIG_CPU_32v6K)
-	clrex					@ clear the exclusive monitor
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
-#else
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
+	sub	r0, sp, #4			@ uninhabited address
+	strex	r1, r2, [r0]			@ clear the exclusive monitor
 #endif
+	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
 	msr	spsr_cxsf, r1			@ save in spsr_svc
-#if defined(CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
 	strex	r1, r2, [sp]			@ clear the exclusive monitor
-#elif defined(CONFIG_CPU_32v6K)
-	clrex					@ clear the exclusive monitor
 #endif
 	.if	\fast
 	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
@@ -261,7 +256,10 @@
 	.endif
 	ldr	lr, [sp, #S_SP]			@ top of the stack
 	ldrd	r0, r1, [sp, #S_LR]		@ calling lr and pc
-	clrex					@ clear the exclusive monitor
+
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
+	strex	r2, r1, [sp, #S_LR]		@ clear the exclusive monitor
+
 	stmdb	lr!, {r0, r1, \rpsr}		@ calling lr and rfe context
 	ldmia	sp, {r0 - r12}
 	mov	sp, lr
@@ -282,13 +280,16 @@
 	.endm
 #else	/* ifdef CONFIG_CPU_V7M */
 	.macro	restore_user_regs, fast = 0, offset = 0
-	clrex					@ clear the exclusive monitor
 	mov	r2, sp
 	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #\offset + S_PC]	@ get pc
 	add	sp, sp, #\offset + S_SP
 	msr	spsr_cxsf, r1			@ save in spsr_svc
+
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
+	strex	r1, r2, [sp]			@ clear the exclusive monitor
+
 	.if	\fast
 	ldmdb	sp, {r1 - r12}			@ get calling r1 - r12
 	.else

arch/arm/kernel/module.c

@@ -91,6 +91,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			break;
 
 		case R_ARM_ABS32:
+		case R_ARM_TARGET1:
 			*(u32 *)loc += sym->st_value;
 			break;
 

arch/arm/mach-bcm/Makefile

@@ -36,5 +36,4 @@ obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o
 
 ifeq ($(CONFIG_ARCH_BRCMSTB),y)
 obj-y				+= brcmstb.o
-obj-$(CONFIG_SMP)		+= headsmp-brcmstb.o platsmp-brcmstb.o
 endif

arch/arm/mach-bcm/brcmstb.h

@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __BRCMSTB_H__
-#define __BRCMSTB_H__
-
-void brcmstb_secondary_startup(void);
-
-#endif /* __BRCMSTB_H__ */

arch/arm/mach-bcm/headsmp-brcmstb.S

@@ -1,33 +0,0 @@
-/*
- * SMP boot code for secondary CPUs
- * Based on arch/arm/mach-tegra/headsmp.S
- *
- * Copyright (C) 2010 NVIDIA, Inc.
- * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <asm/assembler.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-        .section ".text.head", "ax"
-
-ENTRY(brcmstb_secondary_startup)
-        /*
-         * Ensure CPU is in a sane state by disabling all IRQs and switching
-         * into SVC mode.
-         */
-        setmode	PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0
-
-        bl      v7_invalidate_l1
-        b       secondary_startup
-ENDPROC(brcmstb_secondary_startup)

arch/arm/mach-bcm/platsmp-brcmstb.c

@@ -1,363 +0,0 @@
-/*
- * Broadcom STB CPU SMP and hotplug support for ARM
- *
- * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/printk.h>
-#include <linux/regmap.h>
-#include <linux/smp.h>
-#include <linux/mfd/syscon.h>
-#include <linux/spinlock.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <asm/mach-types.h>
-#include <asm/smp_plat.h>
-
-#include "brcmstb.h"
-
-enum {
-	ZONE_MAN_CLKEN_MASK		= BIT(0),
-	ZONE_MAN_RESET_CNTL_MASK	= BIT(1),
-	ZONE_MAN_MEM_PWR_MASK		= BIT(4),
-	ZONE_RESERVED_1_MASK		= BIT(5),
-	ZONE_MAN_ISO_CNTL_MASK		= BIT(6),
-	ZONE_MANUAL_CONTROL_MASK	= BIT(7),
-	ZONE_PWR_DN_REQ_MASK		= BIT(9),
-	ZONE_PWR_UP_REQ_MASK		= BIT(10),
-	ZONE_BLK_RST_ASSERT_MASK	= BIT(12),
-	ZONE_PWR_OFF_STATE_MASK		= BIT(25),
-	ZONE_PWR_ON_STATE_MASK		= BIT(26),
-	ZONE_DPG_PWR_STATE_MASK		= BIT(28),
-	ZONE_MEM_PWR_STATE_MASK		= BIT(29),
-	ZONE_RESET_STATE_MASK		= BIT(31),
-	CPU0_PWR_ZONE_CTRL_REG		= 1,
-	CPU_RESET_CONFIG_REG		= 2,
-};
-
-static void __iomem *cpubiuctrl_block;
-static void __iomem *hif_cont_block;
-static u32 cpu0_pwr_zone_ctrl_reg;
-static u32 cpu_rst_cfg_reg;
-static u32 hif_cont_reg;
-
-#ifdef CONFIG_HOTPLUG_CPU
-static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state);
-
-static int per_cpu_sw_state_rd(u32 cpu)
-{
-	sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
-	return per_cpu(per_cpu_sw_state, cpu);
-}
-
-static void per_cpu_sw_state_wr(u32 cpu, int val)
-{
-	per_cpu(per_cpu_sw_state, cpu) = val;
-	dmb();
-	sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
-	dsb_sev();
-}
-#else
-static inline void per_cpu_sw_state_wr(u32 cpu, int val) { }
-#endif
-
-static void __iomem *pwr_ctrl_get_base(u32 cpu)
-{
-	void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg;
-	base += (cpu_logical_map(cpu) * 4);
-	return base;
-}
-
-static u32 pwr_ctrl_rd(u32 cpu)
-{
-	void __iomem *base = pwr_ctrl_get_base(cpu);
-	return readl_relaxed(base);
-}
-
-static void pwr_ctrl_wr(u32 cpu, u32 val)
-{
-	void __iomem *base = pwr_ctrl_get_base(cpu);
-	writel(val, base);
-}
-
-static void cpu_rst_cfg_set(u32 cpu, int set)
-{
-	u32 val;
-	val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg);
-	if (set)
-		val |= BIT(cpu_logical_map(cpu));
-	else
-		val &= ~BIT(cpu_logical_map(cpu));
-	writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg);
-}
-
-static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr)
-{
-	const int reg_ofs = cpu_logical_map(cpu) * 8;
-	writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs);
-	writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs);
-}
-
-static void brcmstb_cpu_boot(u32 cpu)
-{
-	pr_info("SMP: Booting CPU%d...\n", cpu);
-
-	/*
-	 * set the reset vector to point to the secondary_startup
-	 * routine
-	 */
-	cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup));
-
-	/* unhalt the cpu */
-	cpu_rst_cfg_set(cpu, 0);
-}
-
-static void brcmstb_cpu_power_on(u32 cpu)
-{
-	/*
-	 * The secondary cores power was cut, so we must go through
-	 * power-on initialization.
-	 */
-	u32 tmp;
-
-	pr_info("SMP: Powering up CPU%d...\n", cpu);
-
-	/* Request zone power up */
-	pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK);
-
-	/* Wait for the power up FSM to complete */
-	do {
-		tmp = pwr_ctrl_rd(cpu);
-	} while (!(tmp & ZONE_PWR_ON_STATE_MASK));
-
-	per_cpu_sw_state_wr(cpu, 1);
-}
-
-static int brcmstb_cpu_get_power_state(u32 cpu)
-{
-	int tmp = pwr_ctrl_rd(cpu);
-	return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1;
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-static void brcmstb_cpu_die(u32 cpu)
-{
-	v7_exit_coherency_flush(all);
-
-	/* Prevent all interrupts from reaching this CPU. */
-	arch_local_irq_disable();
-
-	/*
-	 * Final full barrier to ensure everything before this instruction has
-	 * quiesced.
-	 */
-	isb();
-	dsb();
-
-	per_cpu_sw_state_wr(cpu, 0);
-
-	/* Sit and wait to die */
-	wfi();
-
-	/* We should never get here... */
-	panic("Spurious interrupt on CPU %d received!\n", cpu);
-}
-
-static int brcmstb_cpu_kill(u32 cpu)
-{
-	u32 tmp;
-
-	pr_info("SMP: Powering down CPU%d...\n", cpu);
-
-	while (per_cpu_sw_state_rd(cpu))
-		;
-
-	/* Program zone reset */
-	pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK |
-			      ZONE_PWR_DN_REQ_MASK);
-
-	/* Verify zone reset */
-	tmp = pwr_ctrl_rd(cpu);
-	if (!(tmp & ZONE_RESET_STATE_MASK))
-		pr_err("%s: Zone reset bit for CPU %d not asserted!\n",
-			__func__, cpu);
-
-	/* Wait for power down */
-	do {
-		tmp = pwr_ctrl_rd(cpu);
-	} while (!(tmp & ZONE_PWR_OFF_STATE_MASK));
-
-	/* Settle-time from Broadcom-internal DVT reference code */
-	udelay(7);
-
-	/* Assert reset on the CPU */
-	cpu_rst_cfg_set(cpu, 1);
-
-	return 1;
-}
-
-#endif /* CONFIG_HOTPLUG_CPU */
-
-static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
-{
-	int rc = 0;
-	char *name;
-	struct device_node *syscon_np = NULL;
-
-	name = "syscon-cpu";
-
-	syscon_np = of_parse_phandle(np, name, 0);
-	if (!syscon_np) {
-		pr_err("can't find phandle %s\n", name);
-		rc = -EINVAL;
-		goto cleanup;
-	}
-
-	cpubiuctrl_block = of_iomap(syscon_np, 0);
-	if (!cpubiuctrl_block) {
-		pr_err("iomap failed for cpubiuctrl_block\n");
-		rc = -EINVAL;
-		goto cleanup;
-	}
-
-	rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG,
-					&cpu0_pwr_zone_ctrl_reg);
-	if (rc) {
-		pr_err("failed to read 1st entry from %s property (%d)\n", name,
-			rc);
-		rc = -EINVAL;
-		goto cleanup;
-	}
-
-	rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG,
-					&cpu_rst_cfg_reg);
-	if (rc) {
-		pr_err("failed to read 2nd entry from %s property (%d)\n", name,
-			rc);
-		rc = -EINVAL;
-		goto cleanup;
-	}
-
-cleanup:
-	if (syscon_np)
-		of_node_put(syscon_np);
-
-	return rc;
-}
-
-static int __init setup_hifcont_regs(struct device_node *np)
-{
-	int rc = 0;
-	char *name;
-	struct device_node *syscon_np = NULL;
-
-	name = "syscon-cont";
-
-	syscon_np = of_parse_phandle(np, name, 0);
-	if (!syscon_np) {
-		pr_err("can't find phandle %s\n", name);
-		rc = -EINVAL;
-		goto cleanup;
-	}
-
-	hif_cont_block = of_iomap(syscon_np, 0);
-	if (!hif_cont_block) {
-		pr_err("iomap failed for hif_cont_block\n");
-		rc = -EINVAL;
-		goto cleanup;
-	}
-
-	/* offset is at top of hif_cont_block */
-	hif_cont_reg = 0;
-
-cleanup:
-	if (syscon_np)
-		of_node_put(syscon_np);
-
-	return rc;
-}
-
-static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus)
-{
-	int rc;
-	struct device_node *np;
-	char *name;
-
-	name = "brcm,brcmstb-smpboot";
-	np = of_find_compatible_node(NULL, NULL, name);
-	if (!np) {
-		pr_err("can't find compatible node %s\n", name);
-		return;
-	}
-
-	rc = setup_hifcpubiuctrl_regs(np);
-	if (rc)
-		return;
-
-	rc = setup_hifcont_regs(np);
-	if (rc)
-		return;
-}
-
-static DEFINE_SPINLOCK(boot_lock);
-
-static void brcmstb_secondary_init(unsigned int cpu)
-{
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
-}
-
-static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	/*
-	 * set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/* Bring up power to the core if necessary */
-	if (brcmstb_cpu_get_power_state(cpu) == 0)
-		brcmstb_cpu_power_on(cpu);
-
-	brcmstb_cpu_boot(cpu);
-
-	/*
-	 * now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
-	return 0;
-}
-
-static struct smp_operations brcmstb_smp_ops __initdata = {
-	.smp_prepare_cpus	= brcmstb_cpu_ctrl_setup,
-	.smp_secondary_init	= brcmstb_secondary_init,
-	.smp_boot_secondary	= brcmstb_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
-	.cpu_kill		= brcmstb_cpu_kill,
-	.cpu_die		= brcmstb_cpu_die,
-#endif
-};
-
-CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops);

arch/arm/mach-exynos/mcpm-exynos.c

@@ -43,7 +43,6 @@
 	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR\n\t" \
 	"isb\n\t"\
 	"bl	v7_flush_dcache_"__stringify(level)"\n\t" \
-	"clrex\n\t"\
 	"mrc	p15, 0, r0, c1, c0, 1	@ get ACTLR\n\t" \
 	"bic	r0, r0, #(1 << 6)	@ disable local coherency\n\t" \
 	/* Dummy Load of a device register to avoid Erratum 799270 */ \

arch/arm/mach-imx/Kconfig

@@ -85,7 +85,6 @@ config SOC_IMX25
 
 config SOC_IMX27
 	bool
-	select ARCH_HAS_OPP
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
@@ -659,7 +658,6 @@ comment "Device tree only"
 
 config SOC_IMX5
 	bool
-	select ARCH_HAS_OPP
 	select HAVE_IMX_SRC
 	select MXC_TZIC
 

arch/arm/mach-imx/Makefile

@@ -93,9 +93,11 @@ obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
+ifdef CONFIG_SOC_IMX6
 AFLAGS_headsmp.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+endif
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
 obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o

arch/arm/mach-imx/clk-imx6q.c

@@ -194,6 +194,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_PLL3_80M]  = imx_clk_fixed_factor("pll3_80m",  "pll3_usb_otg",   1, 6);
 	clk[IMX6QDL_CLK_PLL3_60M]  = imx_clk_fixed_factor("pll3_60m",  "pll3_usb_otg",   1, 8);
 	clk[IMX6QDL_CLK_TWD]       = imx_clk_fixed_factor("twd",       "arm",            1, 2);
+	if (cpu_is_imx6dl()) {
+		clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1);
+		clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1);
+	}
 
 	clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
 	clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
@@ -217,8 +221,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_ESAI_SEL]         = imx_clk_mux("esai_sel",         base + 0x20, 19, 2, audio_sels,        ARRAY_SIZE(audio_sels));
 	clk[IMX6QDL_CLK_ASRC_SEL]         = imx_clk_mux("asrc_sel",         base + 0x30, 7,  2, audio_sels,        ARRAY_SIZE(audio_sels));
 	clk[IMX6QDL_CLK_SPDIF_SEL]        = imx_clk_mux("spdif_sel",        base + 0x30, 20, 2, audio_sels,        ARRAY_SIZE(audio_sels));
-	clk[IMX6QDL_CLK_GPU2D_AXI]        = imx_clk_mux("gpu2d_axi",        base + 0x18, 0,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
-	clk[IMX6QDL_CLK_GPU3D_AXI]        = imx_clk_mux("gpu3d_axi",        base + 0x18, 1,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
+	if (cpu_is_imx6q()) {
+		clk[IMX6QDL_CLK_GPU2D_AXI]        = imx_clk_mux("gpu2d_axi",        base + 0x18, 0,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
+		clk[IMX6QDL_CLK_GPU3D_AXI]        = imx_clk_mux("gpu3d_axi",        base + 0x18, 1,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
+	}
 	clk[IMX6QDL_CLK_GPU2D_CORE_SEL]   = imx_clk_mux("gpu2d_core_sel",   base + 0x18, 16, 2, gpu2d_core_sels,   ARRAY_SIZE(gpu2d_core_sels));
 	clk[IMX6QDL_CLK_GPU3D_CORE_SEL]   = imx_clk_mux("gpu3d_core_sel",   base + 0x18, 4,  2, gpu3d_core_sels,   ARRAY_SIZE(gpu3d_core_sels));
 	clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8,  2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));

arch/arm/mach-imx/suspend-imx6.S

@@ -173,6 +173,8 @@ ENTRY(imx6_suspend)
 	ldr	r6, [r11, #0x0]
 	ldr	r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
 	ldr	r6, [r11, #0x0]
+	ldr	r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET]
+	ldr	r6, [r11, #0x0]
 
 	/* use r11 to store the IO address */
 	ldr	r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET]

arch/arm/mach-omap2/board-flash.c

@@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
 	board_nand_data.nr_parts	= nr_parts;
 	board_nand_data.devsize		= nand_type;
 
-	board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW;
+	board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW;
 	gpmc_nand_init(&board_nand_data, gpmc_t);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */

arch/arm/mach-omap2/gpmc-nand.c

@@ -49,7 +49,8 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
 		return 0;
 
 	/* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
-	if (ecc_opt == OMAP_ECC_HAM1_CODE_HW)
+	if (ecc_opt == OMAP_ECC_HAM1_CODE_HW ||
+	    ecc_opt == OMAP_ECC_HAM1_CODE_SW)
 		return 1;
 	else
 		return 0;

arch/arm/mach-omap2/gpmc.c

@@ -1403,8 +1403,11 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
 		pr_err("%s: ti,nand-ecc-opt not found\n", __func__);
 		return -ENODEV;
 	}
-	if (!strcmp(s, "ham1") || !strcmp(s, "sw") ||
-		!strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
+
+	if (!strcmp(s, "sw"))
+		gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_SW;
+	else if (!strcmp(s, "ham1") ||
+		 !strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
 		gpmc_nand_data->ecc_opt =
 				OMAP_ECC_HAM1_CODE_HW;
 	else if (!strcmp(s, "bch4"))

arch/arm/mach-omap2/id.c

@@ -663,7 +663,7 @@ void __init dra7xxx_check_revision(void)
 
 	default:
 		/* Unknown default to latest silicon rev as default*/
-		pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n",
+		pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n",
 			__func__, idcode, hawkeye, rev);
 		omap_revision = DRA752_REV_ES1_1;
 	}

arch/arm/mach-omap2/omap_device.c

@@ -56,7 +56,7 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias,
 
 	r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias);
 	if (!IS_ERR(r)) {
-		dev_warn(&od->pdev->dev,
+		dev_dbg(&od->pdev->dev,
 			 "alias %s already exists\n", clk_alias);
 		clk_put(r);
 		return;

arch/arm/mach-omap2/omap_hwmod.c

@@ -2185,6 +2185,8 @@ static int _enable(struct omap_hwmod *oh)
 			 oh->mux->pads_dynamic))) {
 		omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
 		_reconfigure_io_chain();
+	} else if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+		_reconfigure_io_chain();
 	}
 
 	_add_initiator_dep(oh, mpu_oh);
@@ -2291,6 +2293,8 @@ static int _idle(struct omap_hwmod *oh)
 	if (oh->mux && oh->mux->pads_dynamic) {
 		omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
 		_reconfigure_io_chain();
+	} else if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+		_reconfigure_io_chain();
 	}
 
 	oh->_state = _HWMOD_STATE_IDLE;
@@ -3345,6 +3349,9 @@ int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois)
 	if (!ois)
 		return 0;
 
+	if (ois[0] == NULL) /* Empty list */
+		return 0;
+
 	if (!linkspace) {
 		if (_alloc_linkspace(ois)) {
 			pr_err("omap_hwmod: could not allocate link space\n");

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -35,6 +35,7 @@
 #include "i2c.h"
 #include "mmc.h"
 #include "wd_timer.h"
+#include "soc.h"
 
 /* Base offset for all DRA7XX interrupts external to MPUSS */
 #define DRA7XX_IRQ_GIC_START	32
@@ -3261,7 +3262,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_per3__usb_otg_ss1,
 	&dra7xx_l4_per3__usb_otg_ss2,
 	&dra7xx_l4_per3__usb_otg_ss3,
-	&dra7xx_l4_per3__usb_otg_ss4,
 	&dra7xx_l3_main_1__vcp1,
 	&dra7xx_l4_per2__vcp1,
 	&dra7xx_l3_main_1__vcp2,
@@ -3270,8 +3270,26 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	NULL,
 };
 
+static struct omap_hwmod_ocp_if *dra74x_hwmod_ocp_ifs[] __initdata = {
+	&dra7xx_l4_per3__usb_otg_ss4,
+	NULL,
+};
+
+static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = {
+	NULL,
+};
+
 int __init dra7xx_hwmod_init(void)
 {
+	int ret;
+
 	omap_hwmod_init();
-	return omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs);
+	ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs);
+
+	if (!ret && soc_is_dra74x())
+		return omap_hwmod_register_links(dra74x_hwmod_ocp_ifs);
+	else if (!ret && soc_is_dra72x())
+		return omap_hwmod_register_links(dra72x_hwmod_ocp_ifs);
+
+	return ret;
 }

arch/arm/mach-omap2/soc.h

@@ -245,6 +245,8 @@ IS_AM_SUBCLASS(437x, 0x437)
 #define soc_is_omap54xx()		0
 #define soc_is_omap543x()		0
 #define soc_is_dra7xx()			0
+#define soc_is_dra74x()			0
+#define soc_is_dra72x()			0
 
 #if defined(MULTI_OMAP2)
 # if defined(CONFIG_ARCH_OMAP2)
@@ -393,7 +395,11 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 #if defined(CONFIG_SOC_DRA7XX)
 #undef soc_is_dra7xx
+#undef soc_is_dra74x
+#undef soc_is_dra72x
 #define soc_is_dra7xx()	(of_machine_is_compatible("ti,dra7"))
+#define soc_is_dra74x()	(of_machine_is_compatible("ti,dra74"))
+#define soc_is_dra72x()	(of_machine_is_compatible("ti,dra72"))
 #endif
 
 /* Various silicon revisions for omap2 */

arch/arm/mach-shmobile/Kconfig

@@ -75,6 +75,7 @@ config ARCH_SH7372
 	select ARM_CPU_SUSPEND if PM || CPU_IDLE
 	select CPU_V7
 	select SH_CLK_CPG
+	select SH_INTC
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_TMU
 
@@ -85,6 +86,7 @@ config ARCH_SH73A0
 	select CPU_V7
 	select I2C
 	select SH_CLK_CPG
+	select SH_INTC
 	select RENESAS_INTC_IRQPIN
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_TMU

arch/arm/mach-shmobile/clock-r8a7790.c

@@ -183,8 +183,8 @@ enum {
 
 static struct clk div4_clks[DIV4_NR] = {
 	[DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT),
-	[DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT),
-	[DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1de0, CLK_ENABLE_ON_INIT),
+	[DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT),
+	[DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1df0, CLK_ENABLE_ON_INIT),
 };
 
 /* DIV6 clocks */

arch/arm/mach-shmobile/clock-r8a7791.c

@@ -152,7 +152,7 @@ enum {
 
 static struct clk div4_clks[DIV4_NR] = {
 	[DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT),
-	[DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT),
+	[DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT),
 };
 
 /* DIV6 clocks */

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -644,7 +644,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
 	CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]), /* SCIFA5 */
 	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
-	CLKDEV_DEV_ID("0xe6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */
+	CLKDEV_DEV_ID("e6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
 	CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]), /* SCIFA0 */
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */

arch/arm/mach-vexpress/spc.c

@@ -426,9 +426,15 @@ static int ve_spc_populate_opps(uint32_t cluster)
 
 static int ve_init_opp_table(struct device *cpu_dev)
 {
-	int cluster = topology_physical_package_id(cpu_dev->id);
-	int idx, ret = 0, max_opp = info->num_opps[cluster];
-	struct ve_spc_opp *opps = info->opps[cluster];
+	int cluster;
+	int idx, ret = 0, max_opp;
+	struct ve_spc_opp *opps;
+
+	cluster = topology_physical_package_id(cpu_dev->id);
+	cluster = cluster < 0 ? 0 : cluster;
+
+	max_opp = info->num_opps[cluster];
+	opps = info->opps[cluster];
 
 	for (idx = 0; idx < max_opp; idx++, opps++) {
 		ret = dev_pm_opp_add(cpu_dev, opps->freq * 1000, opps->u_volt);
@@ -537,6 +543,8 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev)
 	spc->hw.init = &init;
 	spc->cluster = topology_physical_package_id(cpu_dev->id);
 
+	spc->cluster = spc->cluster < 0 ? 0 : spc->cluster;
+
 	init.name = dev_name(cpu_dev);
 	init.ops = &clk_spc_ops;
 	init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE;

arch/arm/mm/abort-ev6.S

@@ -17,12 +17,6 @@
  */
 	.align	5
 ENTRY(v6_early_abort)
-#ifdef CONFIG_CPU_V6
-	sub	r1, sp, #4			@ Get unused stack location
-	strex	r0, r1, [r1]			@ Clear the exclusive monitor
-#elif defined(CONFIG_CPU_32v6K)
-	clrex
-#endif
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 /*

arch/arm/mm/abort-ev7.S

@@ -13,12 +13,6 @@
  */
 	.align	5
 ENTRY(v7_early_abort)
-	/*
-	 * The effect of data aborts on on the exclusive access monitor are
-	 * UNPREDICTABLE. Do a CLREX to clear the state
-	 */
-	clrex
-
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 

arch/arm64/Makefile

@@ -39,7 +39,7 @@ head-y		:= arch/arm64/kernel/head.o
 
 # The byte offset of the kernel image in RAM from the start of RAM.
 ifeq ($(CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET), y)
-TEXT_OFFSET := $(shell awk 'BEGIN {srand(); printf "0x%04x0\n", int(65535 * rand())}')
+TEXT_OFFSET := $(shell awk 'BEGIN {srand(); printf "0x%03x000\n", int(512 * rand())}')
 else
 TEXT_OFFSET := 0x00080000
 endif

arch/arm64/configs/defconfig

@@ -64,6 +64,8 @@ CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
+CONFIG_AHCI_XGENE=y
+CONFIG_PHY_XGENE=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_OF_PLATFORM=y
 CONFIG_NETDEVICES=y
@@ -71,6 +73,7 @@ CONFIG_TUN=y
 CONFIG_VIRTIO_NET=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
+CONFIG_NET_XGENE=y
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_SERIO_SERPORT is not set

arch/arm64/include/asm/sparsemem.h

@@ -17,7 +17,7 @@
 #define __ASM_SPARSEMEM_H
 
 #ifdef CONFIG_SPARSEMEM
-#define MAX_PHYSMEM_BITS	40
+#define MAX_PHYSMEM_BITS	48
 #define SECTION_SIZE_BITS	30
 #endif
 

arch/arm64/include/asm/unistd.h

@@ -41,7 +41,7 @@
 #define __ARM_NR_compat_cacheflush	(__ARM_NR_COMPAT_BASE+2)
 #define __ARM_NR_compat_set_tls		(__ARM_NR_COMPAT_BASE+5)
 
-#define __NR_compat_syscalls		383
+#define __NR_compat_syscalls		386
 #endif
 
 #define __ARCH_WANT_SYS_CLONE

arch/arm64/include/asm/unistd32.h

@@ -787,3 +787,8 @@ __SYSCALL(__NR_sched_setattr, sys_sched_setattr)
 __SYSCALL(__NR_sched_getattr, sys_sched_getattr)
 #define __NR_renameat2 382
 __SYSCALL(__NR_renameat2, sys_renameat2)
+			/* 383 for seccomp */
+#define __NR_getrandom 384
+__SYSCALL(__NR_getrandom, sys_getrandom)
+#define __NR_memfd_create 385
+__SYSCALL(__NR_memfd_create, sys_memfd_create)

arch/arm64/kernel/cpuinfo.c

@@ -49,7 +49,7 @@ static void cpuinfo_detect_icache_policy(struct cpuinfo_arm64 *info)
 
 	if (l1ip != ICACHE_POLICY_PIPT)
 		set_bit(ICACHEF_ALIASING, &__icache_flags);
-	if (l1ip == ICACHE_POLICY_AIVIVT);
+	if (l1ip == ICACHE_POLICY_AIVIVT)
 		set_bit(ICACHEF_AIVIVT, &__icache_flags);
 
 	pr_info("Detected %s I-cache on CPU%d\n", icache_policy_str[l1ip], cpu);

arch/arm64/kernel/efi.c

@@ -188,6 +188,8 @@ static __init void reserve_regions(void)
 		if (uefi_debug)
 			pr_cont("\n");
 	}
+
+	set_bit(EFI_MEMMAP, &efi.flags);
 }
 
 
@@ -463,6 +465,8 @@ static int __init arm64_enter_virtual_mode(void)
 	efi_native_runtime_setup();
 	set_bit(EFI_RUNTIME_SERVICES, &efi.flags);
 
+	efi.runtime_version = efi.systab->hdr.revision;
+
 	return 0;
 
 err_unmap:

arch/arm64/kernel/head.S

@@ -38,11 +38,11 @@
 
 #define KERNEL_RAM_VADDR	(PAGE_OFFSET + TEXT_OFFSET)
 
-#if (TEXT_OFFSET & 0xf) != 0
-#error TEXT_OFFSET must be at least 16B aligned
-#elif (PAGE_OFFSET & 0xfffff) != 0
+#if (TEXT_OFFSET & 0xfff) != 0
+#error TEXT_OFFSET must be at least 4KB aligned
+#elif (PAGE_OFFSET & 0x1fffff) != 0
 #error PAGE_OFFSET must be at least 2MB aligned
-#elif TEXT_OFFSET > 0xfffff
+#elif TEXT_OFFSET > 0x1fffff
 #error TEXT_OFFSET must be less than 2MB
 #endif
 

arch/arm64/kernel/ptrace.c

@@ -1115,19 +1115,15 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs)
 	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
 		trace_sys_enter(regs, regs->syscallno);
 
-#ifdef CONFIG_AUDITSYSCALL
 	audit_syscall_entry(syscall_get_arch(), regs->syscallno,
 		regs->orig_x0, regs->regs[1], regs->regs[2], regs->regs[3]);
-#endif
 
 	return regs->syscallno;
 }
 
 asmlinkage void syscall_trace_exit(struct pt_regs *regs)
 {
-#ifdef CONFIG_AUDITSYSCALL
 	audit_syscall_exit(regs);
-#endif
 
 	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
 		trace_sys_exit(regs, regs_return_value(regs));

arch/arm64/mm/init.c

@@ -32,6 +32,7 @@
 #include <linux/of_fdt.h>
 #include <linux/dma-mapping.h>
 #include <linux/dma-contiguous.h>
+#include <linux/efi.h>
 
 #include <asm/fixmap.h>
 #include <asm/sections.h>
@@ -148,7 +149,8 @@ void __init arm64_memblock_init(void)
 		memblock_reserve(__virt_to_phys(initrd_start), initrd_end - initrd_start);
 #endif
 
-	early_init_fdt_scan_reserved_mem();
+	if (!efi_enabled(EFI_MEMMAP))
+		early_init_fdt_scan_reserved_mem();
 
 	/* 4GB maximum for 32-bit only capable devices */
 	if (IS_ENABLED(CONFIG_ZONE_DMA))

arch/frv/include/asm/processor.h

@@ -129,7 +129,8 @@ unsigned long get_wchan(struct task_struct *p);
 #define	KSTK_EIP(tsk)	((tsk)->thread.frame0->pc)
 #define	KSTK_ESP(tsk)	((tsk)->thread.frame0->sp)
 
-#define cpu_relax()    barrier()
+#define cpu_relax() barrier()
+#define cpu_relax_lowlatency() cpu_relax()
 
 /* data cache prefetch */
 #define ARCH_HAS_PREFETCH

arch/hexagon/mm/cache.c

@@ -68,6 +68,7 @@ void flush_icache_range(unsigned long start, unsigned long end)
 	);
 	local_irq_restore(flags);
 }
+EXPORT_SYMBOL(flush_icache_range);
 
 void hexagon_clean_dcache_range(unsigned long start, unsigned long end)
 {

arch/ia64/Kconfig

@@ -549,8 +549,6 @@ source "drivers/sn/Kconfig"
 config KEXEC
 	bool "kexec system call"
 	depends on !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
-	select CRYPTO
-	select CRYPTO_SHA256
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/ia64/include/asm/unistd.h

@@ -11,7 +11,7 @@
 
 
 
-#define NR_syscalls			316 /* length of syscall table */
+#define NR_syscalls			317 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about

arch/ia64/include/uapi/asm/unistd.h

@@ -329,5 +329,6 @@
 #define __NR_sched_getattr		1337
 #define __NR_renameat2			1338
 #define __NR_getrandom			1339
+#define __NR_memfd_create		1339
 
 #endif /* _UAPI_ASM_IA64_UNISTD_H */

arch/ia64/kernel/entry.S

@@ -1777,6 +1777,7 @@ sys_call_table:
 	data8 sys_sched_getattr
 	data8 sys_renameat2
 	data8 sys_getrandom
+	data8 sys_memfd_create			// 1340
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
 #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */

arch/m68k/Kconfig

@@ -91,8 +91,6 @@ config MMU_SUN3
 config KEXEC
 	bool "kexec system call"
 	depends on M68KCLASSIC
-	select CRYPTO
-	select CRYPTO_SHA256
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/microblaze/include/uapi/asm/unistd.h

@@ -399,5 +399,8 @@
 #define __NR_sched_setattr	381
 #define __NR_sched_getattr	382
 #define __NR_renameat2		383
+#define __NR_seccomp		384
+#define __NR_getrandom		385
+#define __NR_memfd_create	386
 
 #endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */

arch/microblaze/kernel/syscall_table.S

@@ -384,3 +384,6 @@ ENTRY(sys_call_table)
 	.long sys_sched_setattr
 	.long sys_sched_getattr
 	.long sys_renameat2
+	.long sys_seccomp
+	.long sys_getrandom		/* 385 */
+	.long sys_memfd_create

arch/mips/Kconfig

@@ -2396,8 +2396,6 @@ source "kernel/Kconfig.preempt"
 
 config KEXEC
 	bool "Kexec system call"
-	select CRYPTO
-	select CRYPTO_SHA256
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/mips/alchemy/devboards/db1200.c

@@ -847,6 +847,7 @@ int __init db1200_dev_setup(void)
 			pr_warn("DB1200: cant get I2C close to 50MHz\n");
 		else
 			clk_set_rate(c, pfc);
+		clk_prepare_enable(c);
 		clk_put(c);
 	}
 
@@ -922,11 +923,6 @@ int __init db1200_dev_setup(void)
 	}
 
 	/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
-	c = clk_get(NULL, "psc1_intclk");
-	if (!IS_ERR(c)) {
-		clk_prepare_enable(c);
-		clk_put(c);
-	}
 	__raw_writel(PSC_SEL_CLK_SERCLK,
 	    (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
 	wmb();

arch/mips/bcm47xx/setup.c

@@ -59,12 +59,21 @@ static void bcm47xx_machine_restart(char *command)
 	switch (bcm47xx_bus_type) {
 #ifdef CONFIG_BCM47XX_SSB
 	case BCM47XX_BUS_TYPE_SSB:
-		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 3);
+		if (bcm47xx_bus.ssb.chip_id == 0x4785)
+			write_c0_diag4(1 << 22);
+		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
+		if (bcm47xx_bus.ssb.chip_id == 0x4785) {
+			__asm__ __volatile__(
+				".set\tmips3\n\t"
+				"sync\n\t"
+				"wait\n\t"
+				".set\tmips0");
+		}
 		break;
 #endif
 #ifdef CONFIG_BCM47XX_BCMA
 	case BCM47XX_BUS_TYPE_BCMA:
-		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 3);
+		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1);
 		break;
 #endif
 	}

arch/mips/cavium-octeon/setup.c

@@ -263,7 +263,6 @@ static uint64_t crashk_size, crashk_base;
 static int octeon_uart;
 
 extern asmlinkage void handle_int(void);
-extern asmlinkage void plat_irq_dispatch(void);
 
 /**
  * Return non zero if we are currently running in the Octeon simulator
@@ -458,6 +457,18 @@ static void octeon_halt(void)
 	octeon_kill_core(NULL);
 }
 
+static char __read_mostly octeon_system_type[80];
+
+static int __init init_octeon_system_type(void)
+{
+	snprintf(octeon_system_type, sizeof(octeon_system_type), "%s (%s)",
+		cvmx_board_type_to_string(octeon_bootinfo->board_type),
+		octeon_model_get_string(read_c0_prid()));
+
+	return 0;
+}
+early_initcall(init_octeon_system_type);
+
 /**
  * Return a string representing the system type
  *
@@ -465,11 +476,7 @@ static void octeon_halt(void)
  */
 const char *octeon_board_type_string(void)
 {
-	static char name[80];
-	sprintf(name, "%s (%s)",
-		cvmx_board_type_to_string(octeon_bootinfo->board_type),
-		octeon_model_get_string(read_c0_prid()));
-	return name;
+	return octeon_system_type;
 }
 
 const char *get_system_type(void)

arch/mips/include/asm/eva.h

@@ -0,0 +1,43 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2014, Imagination Technologies Ltd.
+ *
+ * EVA functions for generic code
+ */
+
+#ifndef _ASM_EVA_H
+#define _ASM_EVA_H
+
+#include <kernel-entry-init.h>
+
+#ifdef __ASSEMBLY__
+
+#ifdef CONFIG_EVA
+
+/*
+ * EVA early init code
+ *
+ * Platforms must define their own 'platform_eva_init' macro in
+ * their kernel-entry-init.h header. This macro usually does the
+ * platform specific configuration of the segmentation registers,
+ * and it is normally called from assembly code.
+ *
+ */
+
+.macro eva_init
+platform_eva_init
+.endm
+
+#else
+
+.macro eva_init
+.endm
+
+#endif /* CONFIG_EVA */
+
+#endif /* __ASSEMBLY__ */
+
+#endif

arch/mips/include/asm/gic.h

@@ -49,7 +49,7 @@
 #endif
 #define GICBIS(reg, mask, bits)			\
 	do { u32 data;				\
-		GICREAD((reg), data);		\
+		GICREAD(reg, data);		\
 		data &= ~(mask);		\
 		data |= ((bits) & (mask));	\
 		GICWRITE((reg), data);		\

arch/mips/include/asm/irq.h

@@ -26,6 +26,8 @@ static inline int irq_canonicalize(int irq)
 #define irq_canonicalize(irq) (irq)	/* Sane hardware, sane code ... */
 #endif
 
+asmlinkage void plat_irq_dispatch(void);
+
 extern void do_IRQ(unsigned int irq);
 
 extern void arch_init_irq(void);

arch/mips/include/asm/mach-malta/kernel-entry-init.h

@@ -10,14 +10,15 @@
 #ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
 #define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
 
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+
 	/*
 	 * Prepare segments for EVA boot:
 	 *
 	 * This is in case the processor boots in legacy configuration
 	 * (SI_EVAReset is de-asserted and CONFIG5.K == 0)
 	 *
-	 * On entry, t1 is loaded with CP0_CONFIG
-	 *
 	 * ========================= Mappings =============================
 	 * Virtual memory           Physical memory           Mapping
 	 * 0x00000000 - 0x7fffffff  0x80000000 - 0xfffffffff   MUSUK (kuseg)
@@ -30,12 +31,20 @@
 	 *
 	 *
 	 * Lowmem is expanded to 2GB
+	 *
+	 * The following code uses the t0, t1, t2 and ra registers without
+	 * previously preserving them.
+	 *
 	 */
-	.macro	eva_entry
+	.macro	platform_eva_init
+
+	.set	push
+	.set	reorder
 	/*
 	 * Get Config.K0 value and use it to program
 	 * the segmentation registers
 	 */
+	mfc0    t1, CP0_CONFIG
 	andi	t1, 0x7 /* CCA */
 	move	t2, t1
 	ins	t2, t1, 16, 3
@@ -77,6 +86,8 @@
 	mtc0    t0, $16, 5
 	sync
 	jal	mips_ihb
+
+	.set	pop
 	.endm
 
 	.macro	kernel_entry_setup
@@ -95,7 +106,7 @@
 	sll     t0, t0, 6   /* SC bit */
 	bgez    t0, 9f
 
-	eva_entry
+	platform_eva_init
 	b       0f
 9:
 	/* Assume we came from YAMON... */
@@ -127,8 +138,7 @@
 #ifdef CONFIG_EVA
 	sync
 	ehb
-	mfc0    t1, CP0_CONFIG
-	eva_entry
+	platform_eva_init
 #endif
 	.endm
 

arch/mips/include/asm/mach-netlogic/topology.h

@@ -10,13 +10,6 @@
 
 #include <asm/mach-netlogic/multi-node.h>
 
-#ifdef CONFIG_SMP
-#define topology_physical_package_id(cpu)	cpu_to_node(cpu)
-#define topology_core_id(cpu)	(cpu_logical_map(cpu) / NLM_THREADS_PER_CORE)
-#define topology_thread_cpumask(cpu)		(&cpu_sibling_map[cpu])
-#define topology_core_cpumask(cpu)	cpumask_of_node(cpu_to_node(cpu))
-#endif
-
 #include <asm-generic/topology.h>
 
 #endif /* _ASM_MACH_NETLOGIC_TOPOLOGY_H */

arch/mips/include/asm/pgtable.h

@@ -122,6 +122,9 @@ do {									\
 	}								\
 } while(0)
 
+extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
+	pte_t pteval);
+
 #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
 
 #define pte_none(pte)		(!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL))
@@ -145,7 +148,6 @@ static inline void set_pte(pte_t *ptep, pte_t pte)
 		}
 	}
 }
-#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
 
 static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
@@ -183,7 +185,6 @@ static inline void set_pte(pte_t *ptep, pte_t pteval)
 	}
 #endif
 }
-#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
 
 static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
@@ -390,15 +391,12 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 
 extern void __update_tlb(struct vm_area_struct *vma, unsigned long address,
 	pte_t pte);
-extern void __update_cache(struct vm_area_struct *vma, unsigned long address,
-	pte_t pte);
 
 static inline void update_mmu_cache(struct vm_area_struct *vma,
 	unsigned long address, pte_t *ptep)
 {
 	pte_t pte = *ptep;
 	__update_tlb(vma, address, pte);
-	__update_cache(vma, address, pte);
 }
 
 static inline void update_mmu_cache_pmd(struct vm_area_struct *vma,

arch/mips/include/asm/syscall.h

@@ -131,10 +131,12 @@ static inline int syscall_get_arch(void)
 {
 	int arch = EM_MIPS;
 #ifdef CONFIG_64BIT
-	if (!test_thread_flag(TIF_32BIT_REGS))
+	if (!test_thread_flag(TIF_32BIT_REGS)) {
 		arch |= __AUDIT_ARCH_64BIT;
-	if (test_thread_flag(TIF_32BIT_ADDR))
-		arch |= __AUDIT_ARCH_CONVENTION_MIPS64_N32;
+		/* N32 sets only TIF_32BIT_ADDR */
+		if (test_thread_flag(TIF_32BIT_ADDR))
+			arch |= __AUDIT_ARCH_CONVENTION_MIPS64_N32;
+	}
 #endif
 #if defined(__LITTLE_ENDIAN)
 	arch |=  __AUDIT_ARCH_LE;

arch/mips/kernel/cps-vec.S

@@ -13,6 +13,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/asmmacro.h>
 #include <asm/cacheops.h>
+#include <asm/eva.h>
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
 #include <asm/pm.h>
@@ -166,6 +167,9 @@ dcache_done:
 1:	jal	mips_cps_core_init
 	 nop
 
+	/* Do any EVA initialization if necessary */
+	eva_init
+
 	/*
 	 * Boot any other VPEs within this core that should be online, and
 	 * deactivate this VPE if it should be offline.