The TPM character devices expose a sequential command/response
interface, but their open handlers leave FMODE_PREAD and FMODE_PWRITE
enabled.
After a command leaves a response pending, pread(fd, buf, 16, 0x1400)
passes 0x1400 as *off to tpm_common_read(). The transfer length is
bounded by response_length, but the offset is used unchecked when
forming data_buffer + *off. A sufficiently large offset therefore causes
an out-of-bounds heap read through copy_to_user() and, if the copy
succeeds, an out-of-bounds zero-write through the following memset().
Positional I/O does not provide coherent semantics for this interface.
An arbitrary pread offset cannot represent how much of a response has
been consumed sequentially. The write callback always stores a command
at the start of data_buffer, while pwrite() does not update file->f_pos
and can leave the sequential read cursor stale.
Call nonseekable_open() from both open handlers. This removes
FMODE_PREAD and FMODE_PWRITE, causing positional reads and writes to
fail with -ESPIPE before reaching the TPM callbacks, and explicitly
marks the files non-seekable. Normal read() and write() continue to use
the existing sequential f_pos cursor, leaving the response state machine
unchanged.
Tested on Linux 6.12 with KASAN and a swtpm TPM2 device:
- sequential partial reads returned the complete response
- pread() and preadv() with offset 0x1400 returned -ESPIPE
- pwrite() and pwritev() with offset zero returned -ESPIPE
- the pending response remained intact after the rejected operations
- a subsequent normal command/response cycle completed normally
- no KASAN report was produced.
Fixes: 9488585b21 ("tpm: add support for partial reads")
Link: https://lore.kernel.org/all/20260710090217.191289-1-yong010301@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Jaewon Yang <yong010301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull staging driver fixes from Greg KH:
"Here are some staging driver fixes for 7.2-rc3 for some reported bugs
in the vme_user and rtl8723bs drivers. These include:
- many rtl8723bs OOB fixes for when connecting to "bad" wifi hosts
- vme_user bugfixes to correctly validate some user-provided data
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()
staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop
staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loop
staging: rtl8723bs: fix OOB write in HT_caps_handler()
staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie()
staging: rtl8723bs: fix OOB reads in IE loops in issue_assocreq() and join_cmd_hdl()
staging: rtl8723bs: fix OOB read in update_beacon_info() IE loop
staging: rtl8723bs: fix WEP length underflow and OOB read in OnAuth()
staging: vme_user: fix location monitor leak in tsi148 bridge
staging: vme_user: fix location monitor leak in fake bridge
staging: vme_user: bound slave read/write to the kern_buf size
staging: rtl8723bs: don't drop short TX frames in _rtw_pktfile_read()
Pull Android/IIO fixes from Greg KH:
"Here is a set of bugfixes for 7.2-rc3 that resolve a bunch of reported
issues in just the binder and iio codebases. Included in here are:
- binder driver bugfixes for both the rust and c versions for
reported problems
- lots and lots of iio driver bugfixes for lots of reported issues
(including a hid sensor driver bugfix)
Full details are in the shortlog, all of these have been in linux-next
with no reported issues"
* tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
iio: event: Fix event FIFO reset race
iio: imu: inv_icm42600: fix timestamp clock period by using lower value
iio: light: al3010: fix incorrect scale for the highest gain range
iio: adc: nxp-sar-adc: Fix the delay calculation in nxp_sar_adc_wait_for()
iio: light: tsl2591: return actual error from probe IRQ failure
iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading
iio: imu: st_lsm6dsx: deselect shub page before reading whoami
rust_binder: clear freeze listener on node removal
rust_binder: reject context manager self-transaction
rust_binder: use a u64 stride when cleaning up the offsets array
binder: fix UAF in binder_free_transaction()
binder: fix UAF in binder_thread_release()
rust_binder: synchronize Rust Binder stats with freeze commands
binder: cache secctx size before release zeroes it
rust_binder: fix BINDER_GET_EXTENDED_ERROR
iio: adc: ad7779: add missing 'select IIO_TRIGGERED_BUFFER' to Kconfig
iio: adc: ad4130: add missing `select IIO_TRIGGERED_BUFFER` to Kconfig
iio: adc: ti-ads124s08: Return reset GPIO lookup errors
iio: temperature: Build mlx90635 with CONFIG_MLX90635
iio: light: al3320a: add missing REGMAP_I2C to Kconfig
...
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial/vt fixes for 7.2-rc3 that resolve some
reported problems. Included in here are:
- vt spurious modifier issue that showed up in -rc1 (reported a
bunch)
- 8250 driver bugfixes
- msm serial driver bugfix
- max310x serial driver bugfix
All of these have been in linux-next with no reported issues"
* tag 'tty-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Ignore flow control on suspend/resume with no_console_suspend
serial: 8250_mid: Disable DMA for selected platforms
serial: 8250_omap: clear rx_running on zero-length DMA completes
vt: fix spurious modifier in CSI/cursor key sequences
serial: msm: Disable DMA for kernel console UART
serial: max310x: implement gpio_chip::get_direction()
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for many reported issues.
Included in here are:
- usb serial driver corruption and use-after-free fixes
- usb gadget rndis bugfixes for malicious/buggy host connections
- typec driver fixes for a load of different tiny reported issues
- typec mux driver revert for a broken patch in -rc1
- usb gadget driver fixes for many different reported problems
- new usb device quirks added
- usbip tool fixes and some core usbip fixes as well
- dwc3 driver fixes for minor issues
- xhci driver fixes for reported problems
- lots of other tiny usb driver fixes for many tiny issues
All of these have been in linux-next with no reported issues"
* tag 'usb-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits)
USB: core: ratelimit cabling message
usb: misc: usbio: fix disconnect UAF in client teardown
Revert "usb: typec: mux: avoid duplicated mux switches"
USB: chaoskey: Fix slab-use-after-free in chaoskey_release()
usb: ucsi: huawei_gaokun: move typec_altmode off stack
usb: typec: tcpci_rt1711h: unregister TCPCI port with devres
usb: typec: tcpm: Fix VDM type for Enter Mode commands
usb: typec: ucsi: cancel pending work on system suspend
usb: typec: class: drop PD lookup reference
usb: typec: ps883x: Fix DP+USB3 configuration
usb: xhci: Fix sleep in atomic context in xhci_free_streams()
xhci: sideband: fix ring sg table pages leak
usb: gadget: udc: Fix use-after-free in gadget_match_driver
usb: dwc3: run gadget disconnect from sleepable suspend context
usb: sl811-hcd: disable controller wakeup on remove
usb: typec: anx7411: use devm_pm_runtime_enable()
usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup()
USB: misc: uss720: unregister parport on probe failure
usb: gadget: function: rndis: add length check for header
usb: gadget: function: rndis: add length check to response query
...
Pull s390 fixes from Vasily Gorbik:
- Fix missing array_index_nospec() call in diag310 memory topology code
to prevent speculative execution with a user controlled array index
- Fix get_align_mask() return type to match vm_unmapped_area_info
align_mask, avoiding possible truncation for future larger masks
- Remove empty zcrypt CEX2 files left over after CEX2 and CEX3 driver
removal
- Add build salt to the vDSO so it gets a unique build id, similar to
the kernel and modules
* tag 's390-7.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Add build salt to the vDSO
s390/zcrypt: Remove the empty file
s390/mm: Fix type mismatch in get_align_mask().
s390/diag: Add missing array_index_nospec() call to memtop_get_page_count()
Pull RISC-V fixes from Paul Walmsley:
"The most notable change involves the rseq kselftest common Makefile
(as it is not RISC-V-specific). The basic approach in the patch
appears similar to one used in the KVM and S390 selftests (grep for
LINUX_TOOL_ARCH_INCLUDE and SUBARCH), and the rseq kselftests pass a
quick build test on x86 after this.
- Avoid a null pointer deference in machine_kexec_prepare() that the
IMA subsystem can trigger
- Bypass libc in part of the ptrace_v_not_enabled kselftest to avoid
noise from child atfork handlers that libc might run
- Include Kconfig support for UltraRISC SoCs, already referenced by
some device drivers; and enable it in our defconfig
- Fix the build of the rseq kselftest for RISC-V by borrowing a
technique from the KVM and S390 kselftests that includes
arch-specific header files from tools/arch/<arch>/include
- Fix some memory leaks in the RISC-V vector ptrace kselftests
- Clean up some DT bindings and hwprobe documentation"
* tag 'riscv-for-linus-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
selftests/riscv: ptrace: Fix memory leak of regset_data in vector tests
selftests/rseq: Fix a building error for riscv arch
riscv: defconfig: enable ARCH_ULTRARISC
riscv: add UltraRISC SoC family Kconfig support
riscv: hwprobe.rst: Document EXT_ZICFISS and EXT_ZICFILP
riscv: hwprobe.rst: Make indentation consistent
dt-bindings: riscv: sort multi-letter Z extensions alphanumerically
selftests: riscv: Bypass libc in inactive vector ptrace test
riscv: Prevent NULL pointer dereference in machine_kexec_prepare()
Pull m68knommu fix from Greg Ungerer:
"Fix incorrectly updated local SoC IO access function names.
Testing didn't pick them up because there was no specific defconfig
for these particular SoC parts. New defconfigs will be introduced in
the next merge cycle to remedy that"
* tag 'm68knommu-fixes-on-top-off-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire: fix breakage of missed IO access updates
Pull tracing fixes from Steven Rostedt:
- Free field in error path of synthetic event parse
In __create_synth_event() the field was allocated but was not freed
in the error path
- Fix ring_buffer_event_length() on 8 byte aligned architectures
On architectures with CONFIG_HAVE_64BIT_ALIGNED_ACCESS set to y, the
ring_buffer_event_length() may return the wrong size. This is because
archs with that config set will always use the "big event meta
header" as that is 8 bytes keeping the payload 8 bytes aligned, even
when a 4 byte header could hold the size of the event
But ring_buffer_event_length() doesn't take this into account and
only subtracts 4 bytes for the meta header in the length when it
should have subtracted 8 bytes
- Have osnoise wait for a full rcu synchronization on unregister
osnoise_unregister_instance() used to call synchronize_rcu() before
freeing its copy of the instance but was switched to kfree_rcu(). The
osniose tracer has code that traverses the instances that it uses,
and inst is just a pointer to that instance. By using kfree_rcu()
instead of synchronize_rcu(), the instance that the inst pointer is
pointing to can be freed while the osnoise code is still referencing
it
That is, a rmdir on an instance first unregisters the tracer. When
the unregister finishes, the rmdir expects that the tracer is
finished with the instance that it is using. By putting back the
synchronize_rcu() in osnoise_unregister_instance() the unregistering
of osnoise will now return when all the users of the instance have
finished
- Remove an unused setting of "ret" in tracing_set_tracer()
- Fix ring_buffer_read_page() copying events
The commit that changed ring_buffer_read_page() to show dropped
events from the buffer itself, split the "commit" variable between
the commit value (with flags) and "size" that holds the size of the
sub-buffer. A cut and paste error changed the test of the reading
from checking the size of the buffer to the size of the event causing
reads to only read one event at a time
- Make tracepoint_printk a static variable
When the tracing sysctl knobs were move from sysctl.c to trace.c, the
variable tracepoint_printk no longer needed to be global. Make it
static
- Fix some typos
- Fix NULL pointer dereference in func_set_flag()
The flags update of the function tracer first checks if the value of
the flag is the same and exits if they are, and then it checks if the
current tracer is the function tracer and exits if it isn't. The
problem is that these checks need to be in a reversed order, as if
the tracer isn't the function tracer, then the flag being checked may
not exist. Reverse the order of these checks
- Fix ufs core trace events to not dereference a pointer in TP_printk()
The TP_printk() part of the TRACE_EVENT() macro is called when the
user reads the "trace" file. This can be seconds, minutes, hours,
days, weeks, and even months after the data was recorded into the
ring buffer. Thus, saving a pointer to an object into the ring buffer
and then dereferencing it from TP_printk() can cause harm as the
object the pointer is pointing to may no longer exist
Fix all the trace events in ufs core to save the device name in the
ring buffer instead of dereferencing the device descriptor from
TP_printk()
- Prevent out-of-bound reads in glob matching of trace events
The filter logic of events allows simple glob logic to add wild cards
to filter on strings. But some events have fields that may not have a
terminating 'nul' character. This may cause the glob matching to go
beyond the string. Change the logic to always pass in the length of
the field that is being matched
- Add no-rcu-check version of trace_##event##_enabled()
The trace_##event##_enabled() usually wraps trace events to do extra
work that is only needed when the trace event is enabled. But this
can hide events that are placed in locations where RCU is not
watching, and can make lockdep not see these bugs when the event is
not enabled
The trace_##event##_enabled() was updated to always test to make sure
RCU is watching to catch locations that may call events without RCU
being active
This caused a false positive for the irq_disabled() and related
events. As that use trace_irq_disabled_enabled() to force RCU to be
watching when the event is enabled via the ct_irq_enter() function,
calls the event, and then calls ct_irq_exit() to put RCU back to its
original state
The trace_irq_disabled_enabled() should not trigger a warning when
RCU is not watching because the code within its block handles the
case properly. Make a __trace_##event##_enabled() version for this
event to use that doesn't check RCU is watching as it handles the
case when it isn't
- Fix use-after-free in user_event_mm_dup()
When the enabler is removed from the link list, it is freed
immediately. But it is protected via RCU and needs to be freed after
an RCU grace period. Use queue_rcu_work() so that the event_mutex can
also be taken as user_event_put() takes the mutex on the last
reference is released
- Free type string in error path of parse_synth_field()
There's an error path in parse_synth_field() where the allocated type
string is not freed
- Add selftest that tests deferred event teardown
- Fix leak in error path of trace_remote_alloc_buffer()
If page allocation fails, the desc->nr_cpus is not incremented for
the current CPU and the allocations done for it are not freed
- Fix allocation length in trace_remote_alloc_buffer()
The logic to calculate the struct_len was doing a double count and
setting the value too large. Calculate the size upfront to fix the
error and simplify the logic
- Fix sparse CPU masks in ring_buffer_desc()
If there are sparse CPUs (gaps in the numbering), the
ring_buffer_desc() will fail as it tests the CPU number against the
number of CPUs that are used
* tag 'trace-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Allow sparse CPU masks in ring_buffer_desc()
tracing/remotes: Fix struct_len in trace_remote_alloc_buffer()
tracing/remotes: Fix leak in trace_remote_alloc_buffer() error path
selftests/user_events: Wait for deferred event teardown after unregister
tracing/synthetic: Free type string on error path
tracing/user_events: Fix use-after-free in user_event_mm_dup()
tracing: Add a no-rcu-check version of trace_##event##_enabled()
tracing: Prevent out-of-bounds read in glob matching
ufs: core: tracing: Do not dereference pointers in TP_printk()
tracing: Fix NULL pointer dereference in func_set_flag()
samples: ftrace: Fix typos in benchmark comment
tracing: Make tracepoint_printk static as not exported
ring-buffer: Fix ring_buffer_read_page() copying only one event per page
tracing: Remove unused ret assignment in tracing_set_tracer()
tracing/osnoise: Call synchronize_rcu() when unregistering
ring-buffer: Fix event length with forced 8-byte alignment
tracing/synthetic: Free pending field on error path
Pull input fixes from Dmitry Torokhov:
- fix MELFAS MMS114 touchscreen driver to reject invalid touch IDs and
avoid multi-touch slot corruption
- fix a crash in the Sega Dreamcast (Maple) mouse driver when opening
the device, caused by missing driver data
- fixes for Maple drivers (keyboard, mouse, joystick) to properly order
setting driver data and device registration to avoid races
* tag 'input-for-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: mms114 - fix multi-touch slot corruption
Input: maple_keyb - set driver data before registering input device
Input: maplecontrol - set driver data before registering input device
Input: maplemouse - set driver data before registering input device
Input: maplemouse - fix NULL pointer dereference in open()
Pull device mapper fixes from Mikulas Patocka:
- dm-log: fix overflow on 32-bit machines
- dm-era: fix out of bounds memory access; fix crashes on invalid args
- dm-verity: fix buffer overflow in forward error correction
- dm-thin: fix misbehavior on I/O failures
- dm-pcache: fix NULL pointer dereference on invalid arguments
- dm-inlinecrypt: fix memory leak on error handling
- dm-integrity: fix ignoring the 'fix_hmac' option on device open
- dm: don't store the keyring in memory for a long term
- 12 miscellaneous fixes for bugs found by Claude Opus 4.6
* tag 'for-7.2/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (23 commits)
dm thin metadata: fix superblock refcount leak on snapshot shadow failure
dm-stats: fix dm_jiffies_to_msec64
dm-stats: fix merge accounting
dm-bufio: fix wrong count calculation in dm_bufio_issue_discard
dm-verity: make error counter atomic
dm-verity: increase sprintf buffer size
dm-verity: fix a possible NULL pointer dereference
dm-verity: avoid double increment of &use_bh_wq_enabled
dm-ioctl: fix a possible overflow in list_version_get_info
dm_early_create: fix freeing used table on dm_resume failure
dm-integrity: fix a bug if the bio is out of limits
dm-integrity: don't increment hash_offset twice
dm-integrity: fix leaking uninitialized kernel memory
dm-integrity: fix the 'fix_hmac' option
dm era: fix error code propagation in era_ctr()
dm era: fix NULL pointer dereference in metadata_open()
dm: avoid leaking the caller's thread keyring via the table device file
dm-inlinecrypt: Fix an error handling path in inlinecrypt_ctr()
dm-pcache: reject option groups without values
dm thin metadata: fix metadata snapshot consistency on commit failure
...
Pull perf events fixes from Ingo Molnar:
- Fix SVM #GP on AMD CPUs that LBR but not BRS (Sandipan Das)
- Fix UAF bug in the perf AUX code (Lee Jia Jie)
- Fix address leakage in the AMD LBR code (Sandipan Das)
- Fix address leakage in the AMD BRS code (Sandipan Das)
* tag 'perf-urgent-2026-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/amd/brs: Fix kernel address leakage
perf/x86/amd/lbr: Fix kernel address leakage
perf/aux: Fix page UAF in map_range()
perf/x86/amd/core: Avoid enabling BRS from the SVM reload path
Pull x86 fixes from Ingo Molnar:
- Fix resctrl resource leak (Tony Luck)
- Fix resctrl umount race (Tony Luck)
- Fix resctrl double-free (Reinette Chatre)
- Fix x86 VGA display fallback logic during bootup on
certain multi-GPU systems (Mario Limonciello)
- Re-add a WBINVD call to the SNP bootstrap path to
fix an SNP regression (Tycho Andersen)
* tag 'x86-urgent-2026-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/virt/sev: Revert "Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN"
x86/video: Only fall back to vga_default_device() without screen info
fs/resctrl: Fix double-add of pseudo-locked region's RMID to free list
fs/resctrl: Fix use-after-free during unmount
fs/resctrl: Free mon_data structures on rdt_get_tree() failure
Pull timer fix from Ingo Molnar:
- Fix a subtle posix-cpu-timers vs. exec() race, which
unearthed other races in the area (Thomas Gleixner)
* tag 'timers-urgent-2026-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Prevent UAF caused by non-leader exec() race
Pull block fixes from Jens Axboe:
- Limit blk_hctx_poll() to one jiffy. Prevents buggy drivers from
spinning for too long, hence triggering a stalled RCU read section
warning
- Avoid a potential deadlock on zone revalidation failure, which could
otherwise trigger a lockdep circular locking splat during a SCSI disk
rescan
- Remove a redundant GD_NEED_PART_SCAN set in add_disk_final()
- Make writes to queue/wbt_lat_usec honor the WBT enable state
- ublk fix to snapshot the batch commands before preparing IO, so that
userspace can't change an already processed tag and trip the
WARN_ON_ONCE() in the rollback path
- xen-blkfront fix for a double completion of split requests on resume
- drbd fix to reject data replies with an out-of-range payload size
* tag 'block-7.2-20260710' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: remove redundant GD_NEED_PART_SCAN in add_disk_final()
drbd: reject data replies with an out-of-range payload size
xen-blkfront: fix double completion of split requests on resume
ublk: snapshot batch commands before preparing I/O
block: Make WBT latency writes honor enable state
block: avoid potential deadlock on zone revalidation failure
blk-mq: bound blk_hctx_poll() to one jiffy
Pull io_uring fixes from Jens Axboe:
- Restore full RCU read section in io_req_local_work_add(), which was
mistakenly dropped with the DEFER_TASKRUN rework in this merge
window. Revert the commit that grabbed the RCU read lock in
io_ctx_mark_taskrun(), as that's no longer required with the previous
fix.
- Fix a dangling iovec after a provided-buffer bundle grow failure,
also an issue introduced in this merge window.
- Reject IORING_CQE_F_32 flag pass-through in MSG_RING to rings that
weren't setup with CQE32 or CQE_MIXED.
- Return -EINVAL rather than -ENOMEM from get_unmapped_area() when mmap
validation fails, matching io_uring_mmap().
* tag 'io_uring-7.2-20260710' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
Revert "io_uring: grab RCU read lock marking task run"
io_uring: restore RCU read section in io_req_local_work_add()
io_uring: fix dangling iovec after provided-buffer bundle grow failure
io_uring/uring_cmd: fix uring_cmd.c comments
io_uring/msg_ring: reject CQE32 flag pass-through to normal rings
io_uring/memmap: return -EINVAL from get_unmapped_area() on bad mmap
__reserve_metadata_snap() increments THIN_SUPERBLOCK_LOCATION in the
metadata space map before shadowing it. When dm_tm_shadow_block()
fails, a reference is leaked in the metadata space map.
Fix by adding the missing dm_sm_dec_block().
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: cc8394d86f ("dm thin: provide userspace access to pool metadata")
Cc: stable@vger.kernel.org
A user-only branch stack can contain branches that originate from
the kernel. As a result, kernel addresses are exposed to user space
even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors
supporting X86_FEATURE_BRS (Zen 3 only), perf can still report entries
such as SYSRET/interrupt returns for which the branch-from addresses
are in the kernel.
E.g.
$ perf record -j any,u -c 4000 -e branch-brs -o - -- \
perf bench syscall basic --loop 1000 | \
perf script -i - -F brstack|tr ' ' '\n'| \
grep -E '0x[89a-f][0-9a-f]{15}'
...
0xffffffff810001c4/0x72e2e32955eb/-/-/-/0//-
0xffffffff810001c4/0x72e2d94a9821/-/-/-/0//-
0xffffffff810001c4/0x72e2d94ffa1b/-/-/-/0//-
...
BRS provides no hardware branch filtering, so privilege level
filtering is performed entirely in software. However, amd_brs_match_plm()
only validates the branch-to address against the requested privilege
levels. For branches from the kernel to user space, the branch-from
address is left unchecked and is leaked. Extend the software filter to
also validate the branch-from address, so that any branch record whose
branch-from address is in the kernel is dropped when
PERF_SAMPLE_BRANCH_USER is requested.
Fixes: 8910075d61 ("perf/x86/amd: Enable branch sampling priv level filtering")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://patch.msgid.link/f05931c4f89a146c364bd5dc6b8170b1ac611c65.1783701239.git.sandipan.das@amd.com
Closes: https://lore.kernel.org/all/20260710110235.F3FD81F000E9@smtp.kernel.org/
If the touchscreen controller reports a touch ID of 0, the driver
calculates the slot ID as touch->id - 1, which underflows to UINT_MAX.
This is passed to input_mt_slot() as -1.
Since the input core ignores negative slot values, the active slot remains
unchanged. The driver then reports the touch coordinates for the previously
active slot, corrupting its state.
Fix this by rejecting touch reports with ID 0.
Fixes: 07b8481d4a ("Input: add MELFAS mms114 touchscreen driver")
Cc: stable@vger.kernel.org
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260704060115.353049-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull regulator fixes from Mark Brown:
"A couple of straightforward fixes for device loading, plus a fix for
the core support for keeping multiple regulators with voltages close
to each other that was sadly introduced due to one of the more
beautiful corners of our API design"
* tag 'regulator-fix-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK
regulator: mt6363: add missing MODULE_DEVICE_TABLE()
regulator: mt6316: add missing MODULE_DEVICE_TABLE()
Pull audit fixes from Paul Moore:
"Two relatively small audit patches to fix potential data races with
the main audit backlog queue as well as possible integer overflows
when logging data as hex strings"
* tag 'audit-pr-20260710' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix potential integer overflow in audit_log_n_hex()
audit: Fix data races of skb_queue_len() readers on audit_queue
Pull selinux fixes from Paul Moore:
"Two small SELinux patches to fix a missing permission check for TCP
Fast Open operations and fix a socket lookup issue with SCTP ASCONF
operations"
* tag 'selinux-pr-20260710' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: avoid sk_socket dereference in selinux_sctp_bind_connect()
selinux: check connect-related permissions on TCP Fast Open
Pull ntfs fixes from Namjae Jeon:
- fix stale runlist element dereferences in MFT writeback and fallocate
- fix mrec_lock ABBA deadlock in rename
- prevent userspace modification of NTFS system files
- avoid inode eviction/writeback self-deadlocks
- reject malformed resident attributes in non-resident runlist mapping
- avoid post_write_mst_fixup() on invalid index blocks
- fix a hole runlist leak in insert-range error handling
- sanitize directory lookup MFT references from disk
- fail attribute-list updates after SB_ACTIVE is cleared during
teardown
* tag 'ntfs-for-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs:
ntfs: fail attrlist updates when the superblock is inactive
ntfs: sanitize MFT references returned from ntfs_lookup_inode_by_name()
ntfs: fix hole runlist memory leak in insert range error path
ntfs: avoid calling post_write_mst_fixup() for invalid index_block
ntfs: fix WARN_ON for resident attribute in ntfs_map_runlist_nolock()
ntfs: avoid self-deadlock during inode eviction
ntfs: make system files immutable to prevent corruption
ntfs: fix mrec_lock ABBA deadlock in rename
ntfs: avoid stale runlist element dereference in fallocate
ntfs: avoid stale runlist element dereference in MFT writeback
Pull NFS client fixes from Anna Schumaker:
- SUNRPC:
- Release lower rpc_clnt if killed waiting for XPRT_LOCKED
- Pin upper rpc_clnt across the TLS connect_worker
- NFS:
- Include MAY_WRITE in open permission mask for O_TRUNC
- Charge unstable writes by request size, not folio size
* tag 'nfs-for-7.2-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Charge unstable writes by request size, not folio size
NFSv4: include MAY_WRITE in open permission mask for O_TRUNC
SUNRPC: pin upper rpc_clnt across the TLS connect_worker
SUNRPC: release lower rpc_clnt if killed waiting for XPRT_LOCKED
Pull smb client fixes from Steve French:
- DFS cache allocation fix
- DFS referral bounds check fix
- Fix absolute symlinks when mounting with POSIX extensions
- Fixes for incorrect nlink returned by fstat
- Fix atime in read completion
- Fix busy dentry on umount
- ioctl_query_info buffer overflow fix
- Two fixes for creating special files with SFU
- Fix mode mask in parse_dacl
- SMB1 is_path_accessible wildcard fix and minor SMB1 cleanup
- smb2_check_message fix
- Debug message improvement
- Minor cleanup
* tag 'v7.2-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Remove CIFSSMBSetPathInfoFB() fallback function
cifs: Fix and improve cifs_is_path_accessible() function
smb: client: mask server-provided mode to 07777 in modefromsid
cifs: Show reason why autodisabling serverino support
smb/client: fix incorrect nlink returned by fstat()
smb/client: zero-initialize stack-allocated cifs_open_info_data
smb/client: pass cifs_open_info_data to SMB2_open()
smb/client: use stack-allocated smb2_file_all_info in smb3_query_mf_symlink()
smb: client: fix overflow in passthrough ioctl bounds check
smb: client: fix busy dentry warning on unmount after DIO
cifs: Fix support for creating SFU fifo
cifs: Fix support for creating SFU socket
smb: client: fix atime clamp check in read completion
cifs: validate DFS referral string offsets
smb: client: use GFP_KERNEL for DFS cache allocations
smb: client: restrict implied bcc[0] exemption to responses without data area
smb: client: preserve leading slash for POSIX absolute symlink targets
smb: client: refactor cifs_revalidate_mapping() to use clear_and_wake_up_bit()
If page allocation fails in trace_remote_alloc_buffer(), desc->nr_cpus
is not yet incremented for the current CPU. As a consequence, on error,
half-allocated rb_desc will not be freed in trace_remote_free_buffer().
Increment desc->nr_cpus as soon as the first allocation for the current
CPU has succeeded.
Link: https://patch.msgid.link/20260709160017.1729517-2-vdonnefort@google.com
Fixes: 96e43537af ("tracing: Introduce trace remotes")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull arm64 fixes from Will Deacon:
- Fix crash when using SMT hotplug on ACPI systems in conjunction with
maxcpus=
- Fix 30% kswapd performance regression introduced by C1-Pro SME
erratum workaround
- Fix TLB over-invalidation regression during memory hotplug
- Fix incorrect encoding of FEAT_BWE2 value in ID_AA64DFR2_EL1.BWE
- Typo fixes in the arm64 selftests
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
selftests/arm64: fix spelling errors in comments
arm64/sysreg: Fix BWE field encoding in ID_AA64DFR2_EL1
arm64/mm: Optimize TLB flush in unmap_hotplug_[pmd|pud]_range()
arm64: Avoid eager DVMSync reclaim batches with C1-Pro SME erratum
cpu/hotplug: Fix NULL kobject warning in cpuhp_smt_enable()
arm64: smp: Fix hot-unplug tearing by forcing unregistration
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/pmc:
- Use correct IP block table for AMD 1Ah M80H SoC
- Avoid logging "(null)" for missing DMI values
- asus-armoury: update power limits for G614PR
- bitland-mifs-wmi: Fix NULL pointer dereference during suspend/resume
* tag 'platform-drivers-x86-v7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: amd-pmc: Use correct IP block table for AMD 1Ah M80H SoC
platform/x86: asus-armoury: update power limits for G614PR
platform/x86: bitland-mifs-wmi: Fix NULL pointer dereference during suspend/resume
platform/x86/amd/pmc: Avoid logging "(null)" for DMI values
There were wrong calculations in dm_jiffies_to_msec64 that produced
incorrect output when HZ was different from 1000. This commit fixes them.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Assisted-by: Claude:claude-opus-4-6
Fixes: fd2ed4d252 ("dm: add statistics support")
Cc: stable@vger.kernel.org
There were wrong parentheses when setting stats_aux->merged, so that
merging was never properly accounted. This commit fixes it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Assisted-by: Claude:claude-opus-4-6
Fixes: fd2ed4d252 ("dm: add statistics support")
Cc: stable@vger.kernel.org
block_to_sector converts a block number to a sector number and adds
c->start to the result. It is inappropriate to use this function for
converting the number of blocks to a number to sectors because c->start
would be incorrectly added to the result.
Luckily, the only target that uses dm_bufio_issue_discard is dm-ebs,
which sets c->start to 0, so this bug is latent.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Assisted-by: Claude:claude-opus-4-6
Fixes: 6fbeb0048e ("dm bufio: implement discard")
Cc: stable@vger.kernel.org
Pull gpio fixes from Bartosz Golaszewski:
- provide the missing .get_direction() callback in gpio-palmas
- fix interrupt handling in gpio-dwapb
- add a GPIO self-test program binary to .gitignore
- fix a resource leak in gpio-mvebu
- make the GPIO sharing heuristic more adaptable
* tag 'gpio-fixes-for-v7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mvebu: free generic chips on unbind
selftests: gpio: add gpio-cdev-uaf to .gitignore
gpio: dwapb: Mask interrupts at hardware initialization
gpio: dwapb: Defer clock gating until noirq
gpio: shared: make the voting mechanism adaptable
gpios: palmas: add .get_direction() op
Pull ata fixes from Damien Le Moal:
- Fix handling of security locked drive revalidation. This prevents
such drives from being dropped when locked on resume (Terrence)
* tag 'ata-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Allow capacity transition to zero for locked drives
ata: libata-core: Skip HPA resize for locked drives
Pull drm fixes from Dave Airlie:
"Weekly fixes pull for drm, amdgpu, amdxdna, xe leading the way, some
small core fixes and a nouveau stability fix along with some minor
changes in other drivers.
Seems to be a bit quiter than last week at least.
fb-helper:
- Sync on first active crtc in fb_dirty, rather than first crtc
drm_exec:
- Use direct label in drm_exec
buddy:
- Rework try_harder in the buddy allocator
i915:
- fix underrun on panthor lake
- LT PHY SSC programming fix
- fix some NULL derefs and leaks
nouveau:
- fix a vmm large/small page table update race
xe:
- Fix PTE index in xe_vm_populate_pgtable for chunked binds
- Wait on external BO kernel fences in exec IOCTL
- Remove duplicate include
- Free madvise VMA array on L2 flush failure
- Stub notifier_lock helpers when DRM_GPUSVM=n
amdgpu:
- PSP 15.0.9 update
- SMU 15.0.9 update
- VCN 5.3 fix
- VI ASPM fix
- Userq fix
- lifetime fix for amdgpu_vm_get_task_info_pasid()
- Gfx10 fix
- SMU 14 fix
amdkfd:
- CRIU bounds checking fixes
- secondary context id fix
- Event bounds checking fix
amdxdna:
- Fix uaf in mmap failure path
- A lot of deadlocks, access races and return value fixes
analogix_dp:
- Fix analogix_dp bitshifts during link training
v3d:
- Fix absent indirect bo handling
imagination:
- Make function static to solve compiler warning
- Fix error checking"
* tag 'drm-fixes-2026-07-10' of https://gitlab.freedesktop.org/drm/kernel: (44 commits)
nouveau/vmm: fix another SPT/LPT race
drm/imagination: fix error checking of pvr_vm_context_lookup()
drm/imagination: make pvr_fw_trace_init_mask_ops static
gpu/buddy: bail out of try_harder when alignment cannot be honoured
drm/xe/userptr: Stub notifier_lock helpers when DRM_GPUSVM=n
drm/xe: free madvise VMA array on L2 flush failure
drm/xe: remove duplicate <kunit/test-bug.h> include
drm/xe: Wait on external BO kernel fences in exec IOCTL
drm/xe: Fix PTE index in xe_vm_populate_pgtable() for chunked binds
drm/fb-helper: Only consider active CRTCs for vblank sync
drm/amdkfd: Check bounds on CRIU restore queue type and mqd size
drm/amd/pm: fix smu14 power limit range calculation
drm/amdkfd: Check bounds in allocate_event_notification_slot
amdkfd: properly free secondary context id
drm/amdkfd: Don't acquire buffers during CRIU queue restore
drm/amdkfd: Check bounds on CRIU restore event id
drm/gfx10: Program DB_RING_CONTROL
drm/amdgpu: fix lifetime issue of amdgpu_vm_get_task_info_pasid()
drm/amdgpu: trigger GPU recovery when userq destroy fails to unmap a hung queue
drm/amd/amdgpu: disable ASPM on VI if pcie dpm is disabled
...
The regset_data buffer allocated with calloc() in the parent process
of several vector ptrace tests is never freed before returning,
causing memory leaks in:
- ptrace_v_not_enabled
- ptrace_v_early_debug
- ptrace_v_syscall_clobbering
- v_csr_invalid/ptrace_v_invalid_values
- v_csr_valid/ptrace_v_valid_values
Add free(regset_data) before kill(pid, SIGKILL) to release the
allocated buffer.
Signed-off-by: Wang Yan <wangyan01@kylinos.cn>
Reviewed-by: Sergey Matyukevich <geomatsi@gmail.com>
Link: https://patch.msgid.link/20260710083437.489648-1-wangyan01@kylinos.cn
[pjw@kernel.org: Fixed Sergey's E-mail address]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
add_disk_final() sets GD_NEED_PART_SCAN before calling bdev_add(),
then calls disk_scan_partitions() which sets the flag itself. The
early set is redundant and introduces a race.
Between bdev_add() and disk_scan_partitions(), concurrent openers
(multipathd, blkid, LVM) see the flag in blkdev_get_whole() and
trigger bdev_disk_changed(). When disk_scan_partitions() then runs,
it calls bdev_disk_changed() again, dropping the partitions the
concurrent opener already created before re-adding them, which can
result in transient partition disappearances.
The race is observable by inserting an msleep() between bdev_add()
and disk_scan_partitions() while running concurrent open() calls
during device bind. Without artificial delay, it manifests under
scheduling pressure during boot on systems with aggressive device
scanners (multipathd, systemd-udevd).
Therefore, do not set GD_NEED_PART_SCAN in add_disk_final(). Other
GD_NEED_PART_SCAN consumers (blkdev_get_whole(),
sd_need_revalidate()) should not be affected as the flag
is set internally by disk_scan_partitions().
The retry-on-next-open intention from commit e5cfefa97b
("block: fix scan partition for exclusively open device again")
should also not be affected as the early return paths in
disk_scan_partitions() should be unreachable at device registration
time (bd_holder is NULL and open_partitions is zero).
Fixes: e5cfefa97b ("block: fix scan partition for exclusively open device again")
Cc: stable@vger.kernel.org
Signed-off-by: Connor Williamson <connordw@amazon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260615130715.53693-1-connordw@amazon.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A user-only branch stack can contain branches that originate from
the kernel. As a result, kernel addresses are exposed to user space
even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors
supporting X86_FEATURE_AMD_LBR_V2, perf can still report SYSRET/ERET
entries for which the branch-from addresses are in the kernel.
E.g.
$ perf record -e cycles -o - -j any,save_type,u -- \
perf bench syscall basic --loop 1000 | \
perf script -i - -F brstack|tr ' ' '\n'| \
grep -E '0x[89a-f][0-9a-f]{15}'
...
0xffffffff81001268/0x717a90a38f1a/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH
0xffffffff81001268/0x717a90a39157/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH
0xffffffff81001268/0x717a90a2c628/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH
0xffffffff81001268/0x717a90a41b60/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH
0xffffffff81001268/0x717a90a260db/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH
0xffffffff81001268/0x717a90a260db/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH
0xffffffff81001268/0x717a8bef1c30/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH
0xffffffff81001268/0x717a8e4d3c90/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH
...
The reason is that the hardware filter only considers the privilege
level applicable to the branch target. Extend software filtering to
also validate the branch-from addresses against br_sel, so that any
branch record whose branch-from address is in the kernel is dropped
when PERF_SAMPLE_BRANCH_USER is requested.
Fixes: f4f925dae7 ("perf/x86/amd/lbr: Add LbrExtV2 hardware branch filter support")
Reported-by: Ian Rogers <irogers@google.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/a898a29725f6b2f30518354cdc2e432db66c43cf.1783680119.git.sandipan.das@amd.com
recv_dless_read() receives a P_DATA_REPLY from a peer into the bio of an
outstanding read request. The peer-supplied payload length reaches it as
the signed int data_size, and two peer-controlled inputs can make it
negative. With a negotiated data-integrity-alg the digest length is
subtracted first, so a reply whose payload is smaller than the digest
underflows data_size. With no integrity algorithm (the default) data_size
is assigned from the unsigned h95/h100 wire length and drbdd() never
bounds it for a payload-carrying command, so a length above INT_MAX casts
it negative; this path needs no non-default feature. The bio receive loop
then computes expect = min_t(int, data_size, bv_len), which is negative,
and drbd_recv_all_warn(mapped, expect) receives with a size_t of SIZE_MAX
into the first mapped page.
The sibling receive path read_in_block() is not affected: it uses an
unsigned size and rejects it against DRBD_MAX_BIO_SIZE before receiving.
Reject a data reply whose size is negative after the optional digest
subtraction, covering both triggers.
Impact: a malicious or man-in-the-middle DRBD peer copies attacker-chosen
bytes past a bio page in the receiver, corrupting kernel memory. A node
that reads from its peer (a diskless node, or read-balancing to the peer)
is exposed in the default configuration; data-integrity-alg is not
required.
Fixes: b411b3637f ("The DRBD driver")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5-5-xhigh
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://patch.msgid.link/20260710022837.3738461-1-michael.bommarito@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If no_console_suspend is specified, on suspend the 8250 console driver
uses a scratch register (UART_SCR) to store a special canary value. This
is used during the resume path to identify a printk() call before the
driver's own ->resume() callback. In this case,
serial8250_console_restore() is called to quickly re-init the 8250 for
console printing.
See commit 4516d50aab ("serial: 8250: Use canary to restart console after
suspend") for the original motivation.
Unfortunately, this canary workaround does not work in all cases (such as
suspend to mem) because the scratch register will not reset. This has not
been a real issue until now because it could simply lead to some garbage
characters upon resume. However, with the introduction of console flow
control it becomes a real problem because a failed suspend/resume detection
when flow control is enabled leads to all characters hitting the flow
control timeout.
Workaround this issue by temporarily ignoring console flow control when
the debug canary suspend/resume detection is active.
Fixes: 5e6dfb87b1 ("serial: 8250: Add support for console flow control")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://patch.msgid.link/20260707141032.5074-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On AM33xx RX DMA only triggers when the FIFO reaches the
configured threshold (typically 48 bytes). For smaller bursts
no DMA request is issued and the FIFO is drained by RX timeout.
In this case __dma_rx_do_complete() can legitimately see count == 0.
The current code exits early in this case and does not clear
dma->rx_running, leaving the DMA state inconsistent. This can
prevent RX DMA from restarting and may cause
omap_8250_rx_dma_flush() to fail, marking DMA as broken.
Fix this by clearing dma->rx_running once the DMA transfer has
completed or been terminated, even if no data was transferred.
Fixes: a5fd8945a4 ("serial: 8250: 8250_omap.c: Clear DMA RX running status only after DMA termination is done")
Cc: stable <stable@kernel.org>
Signed-off-by: Matthias Feser <mfe@KBSgmbhfr.onmicrosoft.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
Link: https://patch.msgid.link/BE3P281MB55155F2F5795E411F5A65282EE0B2@BE3P281MB5515.DEUP281.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
csi_modifier_param() builds the xterm modifier parameter from
shift_state, counting KG_SHIFTL/KG_SHIFTR as Shift, KG_ALTGR as Alt
and KG_CTRLL/KG_CTRLR as Ctrl in addition to the canonical KG_SHIFT,
KG_ALT and KG_CTRL.
That is wrong when those weights are not plain modifiers. Keymaps
derived from XKB layouts (by kbd's xkbsupport, and by the
console-setup used in Debian, Ubuntu and others) encode the active
layout group using KG_SHIFTL/KG_SHIFTR:
group 1: -
group 2: shiftl
group 3: shiftr
group 4: shiftl | shiftr
So while a non-default layout group is selected, KG_SHIFTL and/or
KG_SHIFTR are set in shift_state with no Shift key held.
csi_modifier_param() then adds a spurious Shift to every cursor and
CSI key: pressing Up while group 2 is active emits ESC[1;2A (Shift+Up)
instead of ESC[A. KG_ALTGR has the same problem since it is the
standard third-level selector.
Normal keymaps bind the physical Shift/Ctrl/Alt keys to KG_SHIFT,
KG_CTRL and KG_ALT, leaving the left/right and AltGr weights free for
layout and level selection. Count only those canonical weights, so
genuine modifiers are still encoded while layout/level selectors are
not.
Fixes: 4af70f1516 ("vt: add modifier support to cursor keys")
Reported-by: Alexey Gladkov <legion@kernel.org>
Closes: https://lore.kernel.org/kbd/aj2gR0Y7sM6i9s2G@example.org/
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://patch.msgid.link/20260626024833.3419086-1-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The error counter "v->corrupted_errs" was not atomic, thus it could be
subject to race conditions. The call to
dm_audit_log_target("max-corrupted-errors") may be skipped due to the
races.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Assisted-by: Claude:claude-opus-4.6
Fixes: 65ff5b7ddf ("dm verity: add error handling modes for corrupted blocks")
Cc: stable@vger.kernel.org
The prefix "DM_VERITY_ERR_BLOCK_NR" is 22 chars. Add '=', one digit for
type, ',', up to 20 digits for a u64 block number, and a NUL terminator:
that's 46 bytes. The buffer is 42 bytes. For block numbers >= 16 decimal
digits (devices larger than ~16 EB with 4K blocks), snprintf silently
truncates the uevent environment variable.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Assisted-by: Claude:claude-opus-4.6
Fixes: 65ff5b7ddf ("dm verity: add error handling modes for corrupted blocks")
Cc: stable@vger.kernel.org
Fix a possible NULL pointer dereference dm_verity_loadpin_is_bdev_trusted
if the device has no table.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Assisted-by: Claude:claude-opus-4-6
Fixes: b6c1c5745c ("dm: Add verity helpers for LoadPin")
Cc: stable@vger.kernel.org
verity_parse_opt_args is called twice, first with the only_modifier_opts,
first with only_modifier_opts == true and then with only_modifier_opts ==
false. Thus, the static branch &use_bh_wq_enabled was incremented twice
and the destructor verity_dtr would only decrement it once.
Fix tihs bug by only incrementing it on the first call, on the second
call, when v->use_bh_wq is true, do nothing.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Assisted-by: Claude:claude-opus-4-6
Cc: stable@vger.kernel.org
Fixes: df326e7a06 ("dm verity: allow optional args to alter primary args handling")
sizeof(tt->version) is 12 bytes, but the code writes 16 bytes into the
output buffer - info->vers->version[0], info->vers->version[1],
info->vers->version[2] and info->vers->next. This can cause buffer
overflow.
Fix this buffer overflow by replacing "sizeof(tt->version)" with
"sizeof(struct dm_target_versions)".
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Assisted-by: Claude:claude-opus-4.6
Cc: stable@vger.kernel.org
