Pull mtd updates from Miquel Raynal:
"NAND changes:
- Extend SPI NAND continuous read to Winbond devices, which requires
numerous changes in the spi-{mem,nand} layers such as the need for
a secondary read operation template
- Continuous reads in general have also been enhanced/fixed for
avoiding potential issues at probe time and at block boundaries
SPI NOR changes:
- Big set of cleanups and improvements to the locking support.
This series contains some cleanups and bug fixes for code and
documentation around write protection. Then support is added for
complement locking, which allows finer grained configuration of
what is considered locked and unlocked. Then complement locking is
enabled on a bunch of Winbond W25 flashes
- Fix die erase support on Spansion flashes.
Die erase is only supported on multi-die flashes, but the die erase
opcode was set for all. When the opcode is set, it overrides the
default chip erase opcode which should be used for single-die
flashes. Only set the opcode on multi-die flashes. Also, the opcode
was not set on multi-die s28hx-t flashes. Set it so they can use
die-erase correctly
General changes:
- A few drivers and mappings have been removed following SoCs support
removal
- And again, there is the usual load of misc improvements and fixes"
* tag 'mtd/for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (63 commits)
mtd: cfi: Use common error handling code in two functions
mtd: slram: simplify register_device() cleanup
mtd: slram: remove failed entries from the device list
mtd: rawnand: ndfc: use ioread32be/iowrite32be and allow COMPILE_TEST
mtd: spi-nor: spansion: add die erase support in s28hx-t
mtd: spi-nor: spansion: use die erase for multi-die devices only
mtd: spi-nor: winbond: Add W25Q02NWxxIM CMP locking support
mtd: spi-nor: winbond: Add W25Q01NWxxIM CMP locking support
mtd: spi-nor: winbond: Add W25Q01NWxxIQ CMP locking support
mtd: spi-nor: winbond: Add W25H02NWxxAM CMP locking support
mtd: spi-nor: winbond: Add W25H01NWxxAM CMP locking support
mtd: spi-nor: winbond: Add W25H512NWxxAM CMP locking support
mtd: spi-nor: Add steps for testing locking with CMP
mtd: spi-nor: swp: Add support for the complement feature
mtd: spi-nor: Add steps for testing locking support
mtd: maps: remove obsolete impa7 map driver
mtd: maps: remove uclinux map driver
mtd: maps: remove AMD Élan specific drivers
mtd: inftlmount: convert printk(KERN_WARNING) to pr_warn
mtd: Consistently define pci_device_ids
...
* Extend SPI NAND continuous read to Winbond devices, which requires
numerous changes in the spi-{mem,nand} layers such as the need for a
secondary read operation template.
* Continuous reads in general have also been enhanced/fixed for avoiding
potential issues at probe time and at block boundaries.
Plus, there is the usual load of misc fixes and improvements.
SPI NOR changes for 7.2
Notable changes:
- Big set of cleanups and improvements to the locking support. This
series contains some cleanups and bug fixes for code and documentation
around write protection. Then support is added for complement locking,
which allows finer grained configuration of what is considered locked
and unlocked. Then complement locking is enabled on a bunch of Winbond
W25 flashes.
- Fix die erase support on Spansion flashes. Die erase is only supported
on multi-die flashes, but the die erase opcode was set for all. When
the opcode is set, it overrides the default chip erase opcode which
should be used for single-die flashes. Only set the opcode on
multi-die flashes. Also, the opcode was not set on multi-die s28hx-t
flashes. Set it so they can use die-erase correctly.
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Per-controller admin and IO timeout sysfs attributes, and
letting the block layer set request timeouts (Maurizio,
Maximilian)
- Multipath passthrough iostats, and PCI P2PDMA enablement for
multipath devices (Keith, Kiran)
- A new diag sysfs attribute group exporting per-controller
counters (retries, multipath failover, error counters, requeue
and failure counts, reset and reconnect events) (Nilay)
- FDP configuration validation and bounds check fixes (liuxixin)
- Various nvmet fixes, including a pre-auth out-of-bounds read in
the Discovery Get Log Page handler, auth payload bounds
validation, and tcp error-path leak fixes (Bryam, Tianchu,
Geliang)
- nvme-tcp lockdep and workqueue fixes (Shin'ichiro, Kuniyuki,
Eric)
- Assorted other fixes and cleanups (John, Yao, Chao, Mateusz,
Achkinazi, Wentao)
- MD pull request via Yu Kuai:
- raid1/raid10 fixes for a deadlock in the read error recovery
path, error-path detection and bio accounting with cloned bios,
and an nr_pending leak in the REQ_ATOMIC bad-block error path
(Abd-Alrhman)
- PCI P2PDMA propagation from member devices to the RAID device
(Kiran)
- dm-raid bio requeue fix, and various smaller fixes and cleanups
(Benjamin, Chen, Li, Thorsten)
- Enable Clang lock context analysis for the block layer, with the
accompanying annotations across queue limits, the blk_holder_ops
callbacks, crypto, cgroup, iocost, kyber and mq-deadline (Bart)
- Block status code infrastructure work: a tagged status table, a
str_to_blk_op() helper, a bio_endio_status() helper, and on top of
that a new configurable block-layer error injection facility
(Christoph)
- DRBD netlink rework, replacing the genl_magic machinery with explicit
netlink serialization and moving the DRBD UAPI headers to
include/uapi/linux/ (Christoph Böhmwalder)
- bvec improvements: a bvec_folio() helper and making the bvec_iter
helpers proper inline functions (Willy, Christoph)
- ublk cleanups and a canceling-flag fix for the disk-not-allocated
case (Caleb, Ming)
- Partition handling fixes: bound the AIX pp_count scan, fix an of_node
refcount leak, and replace __get_free_page() with kmalloc() (Bryam,
Wentao, Mike)
- Convert numa_node to int in blk_mq_hw_ctx and ->init_request, and add
WQ_PERCPU to the block workqueue users (Mateusz, Marco)
- Block statistics and tracing: propagate in-flight to the whole disk
on partition IO, export passthrough stats, and a new
block_rq_tag_wait tracepoint (Tang, Keith, Aaron)
- A round of removals, unexports and cleanups across bio, direct-io and
the bvec helpers (Christoph)
- Various driver fixes (mtip32xx use-after-free, rbd snap_count
validation and strscpy conversion, nbd socket lockdep reclassify,
virtio-blk zone report clamp, floppy) and a batch of MAINTAINERS
email/list updates (Coly, Li, Yu, Christoph Böhmwalder)
- Other little fixes and cleanups all over
* tag 'for-7.2/block-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (117 commits)
MAINTAINERS: Update Coly Li's email address
block: check bio split for unaligned bvec
nbd: Reclassify sockets to avoid lockdep circular dependency
block: add configurable error injection
block: add a str_to_blk_op helper
block: add a "tag" for block status codes
block: add a macro to initialize the status table
floppy: Drop unused pnp driver data
block: propagate in_flight to whole disk on partition I/O
virtio-blk: clamp zone report to the report buffer capacity
block: optimize I/O merge hot path with unlikely() hints
drivers/block/rbd: Use strscpy() to copy strings into arrays
partitions: aix: bound the pp_count scan to the ppe array
block: Enable lock context analysis
block/mq-deadline: Make the lock context annotations compatible with Clang
block/Kyber: Make the lock context annotations compatible with Clang
block/blk-mq-debugfs: Improve lock context annotations
block/blk-iocost: Inline iocg_lock() and iocg_unlock()
block/blk-iocost: Split ioc_rqos_throttle()
block/crypto: Annotate the crypto functions
...
Merge tag 'mtd/spi-mem-cont-read-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into spi-7.2
Miquel Raynal <miquel.raynal@bootlin.com> says:
Aside from preparation changes in the SPI NAND core, the changes carried
here focus on the shared spi-mem layer which is enhanced in order to
bring two new features:
- The possibility to fill a primary and a secondary operation template
in the direct mapping structure in order to support continuous reads
in SPI NAND, which may require two different read operations.
- SPI controllers may indicate possible CS instabilities over long
transfers by setting a boolean. This capability is related to the
previous one, the need for it has arised while testing SPI NAND
continuous reads with the Cadence QSPI controller which cannot, under
certain conditions, keep the CS asserted for the length of
an eraseblock-large transfer.
Use additional labels so that a bit of exception handling can be better
reused at the end of two function implementations.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Use local variables for the list entry, mtd_info, and private data while
initializing a new device. This keeps the initialization path easier to
read and publishes the new list entry only after mtd_device_register()
has succeeded.
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
register_device() links a new slram_mtdlist entry before allocating all
of the state needed by the entry. If a later allocation, memremap(), or
mtd_device_register() fails, the partially initialized entry remains on
the global list. A later cleanup can then dereference or free invalid
state from that failed entry.
Unwind the partially initialized entry and clear the list tail on each
failure path after the entry has been linked.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Replace ppc4xx-specific in_be32/out_be32 with generic ioread32be/
iowrite32be to make the driver portable. Add COMPILE_TEST dependency
to get build coverage on non-ppc4xx architectures.
While at it, replace 4xx with 44x. The latter was removed a while ago
and is only kept for compatibility.
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Unfortunately, this chip also comes with an incorrect BFPT table,
indicating the Control Register cannot be read back. This is wrong,
reading back the register works and has no (observed) side effect. The
datasheet clearly indicates supporting the 35h command and all bits from
the CR are marked readable. QE and CMP bits are inside, and can be
properly read back.
Add a fixup for this, otherwise it would defeat the use of the CMP
feature.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Unfortunately, this chip also comes with an incorrect BFPT table,
indicating the Control Register cannot be read back. This is wrong,
reading back the register works and has no (observed) side effect. The
datasheet clearly indicates supporting the 35h command and all bits from
the CR are marked readable. QE and CMP bits are inside, and can be
properly read back.
Add a fixup for this, otherwise it would defeat the use of the CMP
feature.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Unfortunately, this chip also comes with an incorrect BFPT table,
indicating the Control Register cannot be read back. This is wrong,
reading back the register works and has no (observed) side effect. The
datasheet clearly indicates supporting the 35h command and all bits from
the CR are marked readable. QE and CMP bits are inside, and can be
properly read back.
Add a fixup for this, otherwise it would defeat the use of the CMP
feature.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This chip has support for the locking complement (CMP) feature. Add
the relevant bit to enable it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
The current locking implementation allows to select a power of two
number of blocks, which is going to be the protected amount, as well as
telling whether this is the data at the top (end of the device) or the
bottom (beginning of the device). This means at most we can cover half
of the device or the entire device, but nothing in between.
The complement feature allows a much finer grain of configuration, by
allowing to invert what is considered locked and unlocked.
Add support for this feature. The only known position for the CMP bit is
bit 6 of the configuration register.
The locking and unlocking logics are kept unchanged if the CMP bit is
unavailable. Otherwise, once the regular logic has been applied, we
check if we already found an optimal configuration. If not, we try with
the CMP bit set. If the coverage is closer to the request, we use it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This driver was originally merged in 2002 for a board using
the Cirrus Logic CL/PS711x platform, but the actual board
file never made it upstream.
The SoC platform is still supported but uses devicetree
based probing, so if anyone ever wanted to upstream board
support, they would just use the regular physmap driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Rather than using platform data or DT properties, the configuration
for this mtd map driver used to be passed through the global
uclinux_ram_map structure, but the last instance was removed in
commit 4ba66a9760 ("arch: remove blackfin port") in 2018.
After commit 251f26c9e8 ("mtd: maps: Make uclinux_ram_map static"),
it became impossible to configure it at all, even with out-of-tree
platform code.
Clearly nobody is using it, so remove it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
There were four MTD maps drivers that were used with AMD Élan SoCs.
Since 486-class CPU support was removed in commit 8b793a92d8 ("x86/cpu:
Remove M486/M486SX/ELAN support"), it is no longer possible to actually
use these. Three of them have already been removed, so remove the
remaining driver entirely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Miquel Raynal: Only NETtel was still in the tree, adapt the patch and the commit log]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Replace all printk(KERN_WARNING ...) calls with pr_warn() to follow
the kernel's recommended logging style and resolve checkpatch warnings.
Also convert one bare printk() that was missing a log level.
No functional change.
Signed-off-by: Li Xinyu <xinyuili@126.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Initializing a pci_device_id using plain list expressions is hard to
understand for a human who isn't into the Linux PCI subsystem. So for
each initializer use one of the PCI_DEVICE macros for .vendor, .device,
.subvendor and .subdevice and named initializers for the remaining
assignments. This makes it easier to parse and also more robust against
chagnes to the struct definition.
Also drop useless zeros and commas.
The mentioned robustness is relevant for a planned change to struct
pci_device_id that replaces .driver_data by an anonymous union.
This change doesn't introduce changes to the compiled pci_device_id
array. Tested on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
During probe(), the devm_ioremap() is called with the parent device
instead of the current one. So when the module is unloaded, the register
area isn't released.
Target the pl35x device in the devm_ioremap() instead of its parent.
Cc: stable@vger.kernel.org
Fixes: 08d8c62164 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The qcom_nand_controller had a struct nand_controller *controller
pointer that was assigned to (struct nand_controller *)&nandc[1],
with the allocation oversized by sizeof(*controller) to make room.
get_qcom_nand_controller() then walked backwards from chip->controller
using sizeof()-based arithmetic to recover the enclosing nandc.
Embed the nand_controller directly into qcom_nand_controller and use
container_of() in get_qcom_nand_controller(). The header now needs
the full rawnand.h definition rather than a forward declaration.
Assisted-by: Claude:Opus-4.7
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Some chips do not support sequential cached reads past block
boundaries, like Winbond. In practice when using UBI, this should very
rarely happen, but let's make sure it never happens.
Cc: stable@vger.kernel.org
Fixes: 003fe4b954 ("mtd: rawnand: Support for sequential cache reads")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The mtd_info contains a struct device, which must be linked to its
parent. Without this, the initialization of the MTD fails with a NULL
pointer dereference.
Fixes: 47a72688fa ("mtd: flash mapping support for Dreamcast VMU.")
Cc: stable@vger.kernel.org
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Use kzalloc_obj() / kzalloc_objs() to allocate the memcard structs,
instead of kmalloc_obj() / kmalloc_objs() to prevent access to
uninitialized data.
Fixes runtime error: Fault in unaligned fixup: 0000 [#1] at
mtd_get_fact_prot_info.
Fixes: 47a72688fa ("mtd: flash mapping support for Dreamcast VMU.")
Cc: stable@vger.kernel.org
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
This patch adds support for the randomizer feature.
It introduces a 'set_randomizer' callback in 'struct spinand_info' and
'struct spinand_device'.
If a driver implements this callback, the core will invoke it during
device initialization (spinand_init) to enable or disable the randomizer
feature based on the device tree configuration.
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Since commit 8b793a92d8 ("x86/cpu: Remove M486/M486SX/ELAN support"),
this board is no longer supported. Remove the mtd map too.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Since commit 8b793a92d8 ("x86/cpu: Remove M486/M486SX/ELAN support"),
this board is no longer supported. Remove the mtd map too.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Since commit 8b793a92d8 ("x86/cpu: Remove M486/M486SX/ELAN support"),
this board is no longer supported. Remove the mtd map too.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
In order to get a very clear view of the sectors being locked, besides
the `params` output giving the ranges, we may want to see a proper map
of the sectors and for each of them, their status. Depending on the use
case, this map may be easier to parse by humans and gives a more acurate
feeling of the situation. At least myself, for the few locking-related
developments I recently went through, I found it very useful to get a
clearer mental model of what was locked/unlocked.
Here is an example of output:
$ cat /sys/kernel/debug/spi-nor/spi0.0/locked-sectors-map
Locked sectors map (x: locked, .: unlocked, unit: 64kiB)
0x00000000 (# 0): ................ ................ ................ ................
0x00400000 (# 64): ................ ................ ................ ................
0x00800000 (# 128): ................ ................ ................ ................
0x00c00000 (# 192): ................ ................ ................ ................
0x01000000 (# 256): ................ ................ ................ ................
0x01400000 (# 320): ................ ................ ................ ................
0x01800000 (# 384): ................ ................ ................ ................
0x01c00000 (# 448): ................ ................ ................ ................
0x02000000 (# 512): ................ ................ ................ ................
0x02400000 (# 576): ................ ................ ................ ................
0x02800000 (# 640): ................ ................ ................ ................
0x02c00000 (# 704): ................ ................ ................ ................
0x03000000 (# 768): ................ ................ ................ ................
0x03400000 (# 832): ................ ................ ................ ................
0x03800000 (# 896): ................ ................ ................ ................
0x03c00000 (# 960): ................ ................ ................ ..............xx
The output is wrapped at 64 sectors, spaces every 16 sectors are
improving the readability, every line starts by the first sector
offset (hex) and number (decimal).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[pratyush@kernel.org: split the debugfs_create_file() into two lines]
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
The ioctl output may be counter intuitive in some cases. Asking for a
"locked status" over a region that is only partially locked will return
"unlocked" whereas in practice maybe the biggest part is actually
locked.
Knowing what is the real software locking state through debugfs would be
very convenient for development/debugging purposes, hence this proposal
for adding an extra block at the end of the file: a "locked sectors"
array which lists every section, if it is locked or not, showing both
the address ranges and the sizes in numbers of "lock sectors" (which on
small density devices is typically different than erase blocks).
Here is an example of output, what is after the "sector map" is new.
$ cat /sys/kernel/debug/spi-nor/spi0.0/params
name (null)
id ef a0 20 00 00 00
size 64.0 MiB
write size 1
page size 256
address nbytes 4
flags HAS_SR_TB | 4B_OPCODES | HAS_4BAIT | HAS_LOCK | HAS_16BIT_SR | HAS_SR_TB_BIT6 | HAS_4BIT_BP | SOFT_RESET | NO_WP
opcodes
read 0xec
dummy cycles 6
erase 0xdc
program 0x34
8D extension none
protocols
read 1S-4S-4S
write 1S-1S-4S
register 1S-1S-1S
erase commands
21 (4.00 KiB) [1]
dc (64.0 KiB) [3]
c7 (64.0 MiB)
sector map
region (in hex) | erase mask | overlaid
------------------+------------+---------
00000000-03ffffff | [ 3] | no
locked sectors
region (in hex) | status | #sectors
------------------+----------+---------
00000000-03ffffff | unlocked | 1024
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
In order to be able to generate debugfs output without having to
actually reach the flash, create a SPI NOR local cache of the status
registers. What matters in our case are all the bits related to sector
locking. As such, in order to make it clear that this cache is not
intended to be used anywhere else, we zero the irrelevant bits.
The cache is initialized once during the early init, and then maintained
every time the write protection scheme is updated.
Suggested-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
As a final preparation step for the introduction of CMP support, make
a few more cosmetic changes to simplify the reading of the diff when
adding the CMP feature. In particular, define "min_prot_len" earlier as
it will be reused and move the definition of the "ret" variable at the
end of the stack just because it looks better.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
In both the locking/unlocking steps, at the end we verify whether we do
not lock/unlock more than requested (in which case an error must be
returned).
While being possible to do that with very simple mask comparisons, it
does not scale when adding extra locking features such as the CMP
possibility. In order to make these checks slightly easier to read and
more future proof, use existing helpers to read the (future) status
register, extract the covered range, and compare it with very usual
algebric comparisons.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
The status register contains 3 or 4 BP (Block Protect) bits, 0 or 1
TB (Top/Bottom) bit, soon 0 or 1 CMP (Complement) bit. The last BP bit
and the TB bit locations change between vendors. The whole logic of
buildling the content of the status register based on some input
conditions is used two times and soon will be used 4 times.
Create dedicated helpers for these steps.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Ease the future reuse of the tb (Top/Bottom) boolean by creating an
intermediate variable.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
"mask" is not very descriptive when we already manipulate two masks, and
soon will manipulate three. Rename it "bp_mask" to align with the
existing "tb_mask" and soon "cmp_mask".
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
There are many helpers already to either read and/or write SR and/or CR,
as well as sometimes check the returned values. In order to be able to
switch from a 1 byte status register to a 2 bytes status register while
keeping the same level of verification, let's introduce a new helper
that writes them both (atomically) and then reads them back (separated)
to compare the values.
In case 2 bytes registers are not supported, we still have the usual
fallback available in the helper being exported to the rest of the core.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
At this stage, the Status Register is most often seen as a single
byte. This is subject to change when we will need to read the CMP bit
which is located in the Control Register (kind of secondary status
register). Both will need to be carried.
Change a few prototypes to carry a u8 pointer. This way it also makes it
very clear where we access the first register, and where we will access
the second.
There is no functional change.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
The comment states that some power of two sizes are not supported. This
is very device dependent (based on the size), so modulate a bit the
sentence to make it more accurate.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Add more details about how these requests are actually handled in the
SPI NOR core. Their behaviour was not entirely clear to me at first, and
explaining them in plain English sounds the way to go.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Align the number of dashes to the bigger column width (the title in this
case) to make the output more pleasant and aligned with what is done
in the "params" file output.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
The "params" variable is used everywhere else, align this particular
line of the file to use "params" directly rather than the "nor" pointer.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
