Pull input updates from Dmitry Torokhov:
- a new charlieplex GPIO keypad driver
- an update to aw86927 driver to support 86938 chip
- an update for Chrome OS EC keyboard driver to support Fn-<key> keymap
extension
- an UAF fix in debugfs teardown in EDT touchscreen driver
- a number of conversions for input drivers to use guard() and __free()
cleanup primitives
- several drivers for bus mice (inport, logibm) and other very old
devices have been removed
- OLPC HGPK PS/2 protocol has been removed as it's been broken and
inactive for 10 something years
- dedicated kpsmoused has been removed from psmouse driver
- other assorted cleanups and fixups
* tag 'input-for-v7.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (101 commits)
Input: charlieplex_keypad - add GPIO charlieplex keypad
dt-bindings: input: add GPIO charlieplex keypad
dt-bindings: input: add settling-time-us common property
dt-bindings: input: add debounce-delay-ms common property
Input: imx_keypad - fix spelling mistake "Colums" -> "Columns"
Input: edt-ft5x06 - fix use-after-free in debugfs teardown
Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data()
Input: ct82c710 - remove driver
Input: mk712 - remove driver
Input: logibm - remove driver
Input: inport - remove driver
Input: qt1070 - inline i2c_check_functionality check
Input: qt1050 - inline i2c_check_functionality check
Input: aiptek - validate raw macro indices before updating state
Input: gf2k - skip invalid hat lookup values
Input: xpad - add RedOctane Games vendor id
Input: xpad - remove stale TODO and changelog header
Input: usbtouchscreen - refactor endpoint lookup
Input: aw86927 - add support for Awinic AW86938
dt-bindings: input: awinic,aw86927: Add Awinic AW86938
...
Pull x86 platform driver updates from Ilpo Järvinen:
"asus-wmi:
- Retain battery charge threshold during boot which avoids
unsolicited change to 100%. Return -ENODATA when the limit
is not yet known
- Improve screenpad power/brightness handling consistency
- Fix screenpad brightness range
barco-p50-gpio:
- Normalize gpio_get return values
bitland-mifs-wmi:
- Add driver for Bitland laptops (supports platform profile,
hwmon, kbd backlight, gpu mode, hotkeys, and fan boost)
dell_rbu:
- Fix using uninitialized value in sysfs write function
dell-wmi-sysman:
- Respect destination length when constructing enum strings
hp-wmi:
- Propagate fan setting apply failures and log an error
- Fix sysfs write vs work handler cancel_delayed_work_sync() deadlock
- Correct keepalive schedule_delayed_work() to mod_delayed_work()
- Fix u8 underflows in GPU delta calculation
- Use mutex to protect fan pwm/mode
- Ignore kbd backlight and FnLock key events that are handled by FW
- Fix fan table parsing (use correct field)
- Add support for Omen 14-fb0xxx, 16-n0xxx, 16-wf1xxx, and
Omen MAX 16-ak0xxxx
input: trackpoint & thinkpad_acpi:
- Enable doubletap by default and add sysfs enable/disable
int3472:
- Add support for GPIO type 0x02 (IR flood LED)
intel-speed-select: (updated to v1.26)
- Avoid using current base frequency as maximum
- Fix CPU extended family ID decoding
- Fix exit code
- Improve error reporting
intel/vsec:
- Refactor to support ACPI-enumerated PMT endpoints.
pcengines-apuv2:
- Attach software node to the gpiochip
uniwill:
- Refactor hwmon to smaller parts to accomodate HW diversity
- Support USB-C power/performance priority switch through sysfs
- Add another XMG Fusion 15 (L19) DMI vendor
- Enable fine-grained features to device lineup mapping
wmi:
- Perform output size check within WMI core to allow simpler WMI
drivers
misc:
- acpi_driver -> platform driver conversions (a large number of
changes from Rafael J. Wysocki)
- cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (106 commits)
platform/x86: hp-wmi: Add support for Omen 16-wf1xxx (8C77)
platform/x86: hp-wmi: Add support for Omen 16-n0xxx (8A44)
platform/x86: hp-wmi: Add support for OMEN MAX 16-ak0xxx (8D87)
platform/x86: hp-wmi: fix fan table parsing
platform/x86: hp-wmi: add Omen 14-fb0xxx (board 8C58) support
platform/wmi: Replace .no_notify_data with .min_event_size
platform/wmi: Extend wmidev_query_block() to reject undersized data
platform/wmi: Extend wmidev_invoke_method() to reject undersized data
platform/wmi: Prepare to reject undersized unmarshalling results
platform/wmi: Convert drivers to use wmidev_invoke_procedure()
platform/wmi: Add wmidev_invoke_procedure()
platform/x86: int3472: Add support for GPIO type 0x02 (IR flood LED)
platform/x86: int3472: Parameterize LED con_id in registration
platform/x86: int3472: Rename pled to led in LED registration code
platform/x86: int3472: Use local variable for LED struct access
platform/x86: thinkpad_acpi: remove obsolete TODO comment
platform/x86: dell-wmi-sysman: bound enumeration string aggregation
platform/x86: hp-wmi: Ignore backlight and FnLock events
platform/x86: uniwill-laptop: Fix signedness bug
platform/x86: dell_rbu: avoid uninit value usage in packet_size_write()
...
The commit 68743c500c ("Input: edt-ft5x06 - use per-client debugfs
directory") removed the manual debugfs teardown, relying on the I2C core
to handle it. However, this creates a window where debugfs files are
still accessible after edt_ft5x06_ts_teardown_debugfs() frees
tsdata->raw_buffer.
To prevent a use-after-free, protect the freeing of raw_buffer with the
device mutex and set raw_buffer to NULL. The debugfs read function
already checks if raw_buffer is NULL under the same mutex, so this
safely avoids the use-after-free.
Fixes: 68743c500c ("Input: edt-ft5x06 - use per-client debugfs directory")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/adnJicDh-bTUaWXP@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
Convert the Mikrotik RouterBoard RB532 to use GPIO descriptors
by defining a software node for the GPIO chip, then register
the button platform device with full info passing the GPIO
as a device property.
This can be used as a base to move more of the RB532 devices
over to passing GPIOs using device properties.
Use the GPIO_ACTIVE_LOW flag and drop the inversion in the
rb532_button_pressed() function.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull input fixes from Dmitry Torokhov:
"Two fixes for force feedback handling in uinput driver:
- fix circular locking dependency in uinput
- fix potential corruption of uinput event queue"
* tag 'input-for-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: uinput - take event lock when submitting FF request "event"
Input: uinput - fix circular locking dependency with ff-core
The `ims_pcu_process_data()` processes incoming URB data byte by byte.
However, it fails to check if the `read_pos` index exceeds
IMS_PCU_BUF_SIZE.
If a malicious USB device sends a packet larger than IMS_PCU_BUF_SIZE,
`read_pos` will increment indefinitely. Moreover, since `read_pos` is
located immediately after `read_buf`, the attacker can overwrite
`read_pos` itself to arbitrarily control the index.
This manipulated `read_pos` is subsequently used in
`ims_pcu_handle_response()` to copy data into `cmd_buf`, leading to a
heap buffer overflow.
Specifically, an attacker can overwrite the `cmd_done.wait.head` located
at offset 136 relative to `cmd_buf` in the `ims_pcu_handle_response()`.
Consequently, when the driver calls `complete(&pcu->cmd_done)`, it
triggers a control flow hijack by using the manipulated pointer.
Fix this by adding a bounds check for `read_pos` before writing to
`read_buf`. If the packet is too long, discard it, log a warning,
and reset the parser state.
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Co-developed-by: Sanghoon Choi <csh0052@gmail.com>
Signed-off-by: Sanghoon Choi <csh0052@gmail.com>
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Link: https://patch.msgid.link/20251221211442.841549-2-eeodqql09@gmail.com
[dtor: factor out resetting packet state, reset checksum as well]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This is a PS/2 mouse interface chip from Chips & Technologies that was
used in TI TravelMate and Gateway Nomad laptops, which used 386 and 486
CPUs. With 486 support being removed from the kernel (and 386 support is
long gone) it is time to retire this driver as well.
Remove the driver.
Link: https://patch.msgid.link/20240808172733.1194442-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This touchscreen controller was used om Gateway AOL Connected Touchpad
released in 2000 and, according to Wikipedia, removed from the market
in October 2001 due to slow sales.
It looks like it can still be bought on eBay for $1000 but I really
doubt anyone will actually use it.
Remove the driver.
Link: https://patch.msgid.link/20240808172733.1194442-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Bus mice use specialized bus interface implemented via an ISA add-in
cards. They were superseded by PS/2 and later USB.
Kconfig entry for the Logitech bus mice states that they "are rather
rare these days". This statement was true in 2002 and is no less true
in 2024.
Remove the driver.
Link: https://patch.msgid.link/20240808172733.1194442-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
A lockdep circular locking dependency warning can be triggered
reproducibly when using a force-feedback gamepad with uinput (for
example, playing ELDEN RING under Wine with a Flydigi Vader 5
controller):
ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex
The cycle is caused by four lock acquisition paths:
1. ff upload: input_ff_upload() holds ff->mutex and calls
uinput_dev_upload_effect() -> uinput_request_submit() ->
uinput_request_send(), which acquires udev->mutex.
2. device create: uinput_ioctl_handler() holds udev->mutex and calls
uinput_create_device() -> input_register_device(), which acquires
input_mutex.
3. device register: input_register_device() holds input_mutex and
calls kbd_connect() -> input_register_handle(), which acquires
dev->mutex.
4. evdev release: evdev_release() calls input_flush_device() under
dev->mutex, which calls input_ff_flush() acquiring ff->mutex.
Fix this by introducing a new state_lock spinlock to protect
udev->state and udev->dev access in uinput_request_send() instead of
acquiring udev->mutex. The function only needs to atomically check
device state and queue an input event into the ring buffer via
uinput_dev_event() -- both operations are safe under a spinlock
(ktime_get_ts64() and wake_up_interruptible() do not sleep). This
breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in
the lock ordering and cannot form cycles with mutexes.
To keep state transitions visible to uinput_request_send(), protect
writes to udev->state in uinput_create_device() and
uinput_destroy_device() with the same state_lock spinlock.
Additionally, move init_completion(&request->done) from
uinput_request_send() to uinput_request_submit() before
uinput_request_reserve_slot(). Once the slot is allocated,
uinput_flush_requests() may call complete() on it at any time from
the destroy path, so the completion must be initialised before the
request becomes visible.
Lock ordering after the fix:
ff->mutex -> state_lock (spinlock, leaf)
udev->mutex -> state_lock (spinlock, leaf)
udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge)
Fixes: ff46255123 ("Input: uinput - switch to the new FF interface")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/CABXGCsMoxag+kEwHhb7KqhuyxfmGGd0P=tHZyb1uKE0pLr8Hkg@mail.gmail.com/
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://patch.msgid.link/20260407075031.38351-1-mikhail.v.gavrilov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
aiptek_irq() derives macro key indices directly from tablet reports and
then uses them to index macroKeyEvents[]. Report types 4 and 5 also save
the derived value in aiptek->lastMacro and later use that state to
release the previous key.
Validate the raw macro index once before it enters that state machine, so
lastMacro only ever stores an in-range macro key. Keep direct bounds
checks for report type 6, which reads the macro number from the packet
body and uses it immediately.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260329001711.88076-1-pengpeng@iscas.ac.cn
[dtor: fix macro fallback in report 5s to use -1]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
gf2k_read() decodes the hat position from a 4-bit field and uses it
directly to index gf2k_hat_to_axis[]. The lookup table only has nine
entries, so malformed packets can read past the end of the fixed table.
Skip hat reporting when the decoded value falls outside the lookup
table instead of forcing it to the neutral position. This keeps the
fix local and avoids reporting a made-up axis state for malformed
packets.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260407120001.1-gf2k-v2-pengpeng@iscas.ac.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input fixes from Dmitry Torokhov:
- new IDs for BETOP BTP-KP50B/C and Razer Wolverine V3 Pro added to
xpad controller driver
- another quirk for new TUXEDO InfinityBook added to i8042
- a small fixup for Synaptics RMI4 driver to properly unlock mutex when
encountering an error in F54
- an update to bcm5974 touch controller driver to reliably switch into
wellspring mode
* tag 'input-for-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - add support for BETOP BTP-KP50B/C controller's wireless mode
Input: xpad - add support for Razer Wolverine V3 Pro
Input: synaptics-rmi4 - fix a locking bug in an error path
Input: i8042 - add TUXEDO InfinityBook Max 16 Gen10 AMD to i8042 quirk table
Input: bcm5974 - recover from failed mode switch
Use the common USB helpers for looking up bulk and interrupt endpoints
(and determining endpoint numbers) instead of open coding.
Note that the NEXIO data interface has two bulk endpoints (see commit
5197424cdc ("Input: usbtouchscreen - add NEXIO (or iNexio) support")
for the descriptors).
The lookup in probe handles both bulk-in and interrupt-in endpoints and
was added to handle NEXIO devices. Replace the open coded lookup with a
lookup for the common interrupt endpoint and an explicit fallback
accepting a bulk endpoint.
This iterates over the (two) endpoints twice for NEXIO devices but makes
it more clear what is going on.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260401082212.2180434-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Without a reported resolution, userspace was assuming 1 unit/mm which
is wildly wrong: a regular smartphone is clearly not 2.4 meters tall.
Most applications do not care much for this kind of raw mm value,
but Phosh's on-screen keyboard would accidentally trigger swipe-to-close
gestures due to misinterpreting small movements as huge ones.
Do what the older goodix.c driver does and set the resolution to 10
units/mm to make sure the numbers calculated by userspace are reasonable.
Signed-off-by: Val Packett <val@packett.cool>
Link: https://patch.msgid.link/20260321073242.556253-1-val@packett.cool
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of requesting interrupt normally and immediately disabling it
with call to disable_irq() use IRQF_NOAUTOEN to keep it disabled until
it is needed. This avoids a tiny window when interrupt is enabled but
not needed.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation simplifies code.
Also use list_first_entry() instead of list_entry() to emphasize intent.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation simplifies code.
Also stop trying to check if input device is opened/in use in the
interrupt handler - the interrupt is disabled when device is closed or
suspended.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
