Pull misc x86 fixes from Ingo Molnar:
- Fix a possible CPU hotplug deadlock bug caused by the new TSC
synchronization code
- Fix a legacy PIC discovery bug that results in device troubles on
affected systems, such as non-working keybards, etc
- Add a new Intel CPU model number to <asm/intel-family.h>
* tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Defer marking TSC unstable to a worker
x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
x86/cpu: Add model number for Intel Arrow Lake mobile processor
Pull irq fix from Ingo Molnar:
"Restore unintentionally lost quirk settings in the GIC irqchip driver,
which broke certain devices"
* tag 'irq-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Don't override quirk settings with default values
Pull probes fixes from Masami Hiramatsu:
- tracing/kprobes: Fix kernel-doc warnings for the variable length
arguments
- tracing/kprobes: Fix to count the symbols in modules even if the
module name is not specified so that user can probe the symbols in
the modules without module name
* tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix symbol counting logic by looking at modules as well
tracing/kprobes: Fix the description of variable length arguments
Pull dma-mapping fix from Christoph Hellwig:
- reduce the initialy dynamic swiotlb size to remove an annoying but
harmless warning from the page allocator (Petr Tesarik)
* tag 'dma-mapping-6.6-2023-10-28' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: do not try to allocate a TLB bigger than MAX_ORDER pages
Pull char/misc driver fixes from Greg KH:
"Here are some very small driver fixes for 6.6-final that have shown up
in the past two weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
fpga: Fix memory leak for fpga_region_test_class_find()
fpga: m10bmc-sec: Change contact for secure update driver
fpga: disable KUnit test suites when module support is enabled
iio: afe: rescale: Accept only offset channels
nvmem: imx: correct nregs for i.MX6ULL
nvmem: imx: correct nregs for i.MX6UL
nvmem: imx: correct nregs for i.MX6SLL
misc: fastrpc: Unmap only if buffer is unmapped from DSP
misc: fastrpc: Clean buffers on remote invocation failures
misc: fastrpc: Free DMA handles for RPC calls with no arguments
misc: fastrpc: Reset metadata buffer to avoid incorrect free
iio: exynos-adc: request second interupt only when touchscreen mode is used
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
dt-bindings: iio: add missing reset-gpios constrain
Pull i2c fixes from Wolfram Sang:
"Bugfixes for Axxia when it is a target and for PEC handling of
stm32f7.
Plus, fix an OF node leak pattern in the mux subsystem"
* tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Fix PEC handling in case of SMBUS transfers
i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: aspeed: Fix i2c bus hang in slave read
Pull clk fixes from Stephen Boyd:
"Three fixes, one for the clk framework and two for clk drivers:
- Avoid an oops in possible_parent_show() by checking for no parent
properly when a DT index based lookup is used
- Handle errors returned from divider_ro_round_rate() in
clk_stm32_composite_determine_rate()
- Fix clk_ops::determine_rate() implementation of socfpga's
gateclk_ops that was ruining uart output because the divider
was forgotten about"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: stm32: Fix a signedness issue in clk_stm32_composite_determine_rate()
clk: Sanitize possible_parent_show to Handle Return Value of of_clk_get_parent_name
clk: socfpga: gate: Account for the divider in determine_rate
Pull misc filesystem fixes from Al Viro:
"Assorted fixes all over the place: literally nothing in common, could
have been three separate pull requests.
All are simple regression fixes, but not for anything from this cycle"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ceph_wait_on_conflict_unlink(): grab reference before dropping ->d_lock
io_uring: kiocb_done() should *not* trust ->ki_pos if ->{read,write}_iter() failed
sparc32: fix a braino in fault handling in csum_and_copy_..._user()
Use of dget() after we'd dropped ->d_lock is too late - dentry might
be gone by that point.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
->ki_pos value is unreliable in such cases. For an obvious example,
consider O_DSYNC write - we feed the data to page cache and start IO,
then we make sure it's completed. Update of ->ki_pos is dealt with
by the first part; failure in the second ends up with negative value
returned _and_ ->ki_pos left advanced as if sync had been successful.
In the same situation write(2) does not advance the file position
at all.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull io_uring fixes from Jens Axboe:
"Fix for an issue reported where reading fdinfo could find a NULL
thread as we didn't properly synchronize, and then a disable for the
IOCB_DIO_CALLER_COMP optimization as a recent reported highlighted how
that could lead to deadlocks if the task issued async O_DIRECT writes
and then proceeded to do sync fallocate() calls"
* tag 'io_uring-6.6-2023-10-27' of git://git.kernel.dk/linux:
io_uring/rw: disable IOCB_DIO_CALLER_COMP
io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid
Fault handler used to make non-trivial calls, so it needed
to set a stack frame up. Used to be
save ... - grab a stack frame, old %o... become %i...
....
ret - go back to address originally in %o7, currently %i7
restore - switch to previous stack frame, in delay slot
Non-trivial calls had been gone since ab5e8b3312 and that code should
have become
retl - go back to address in %o7
clr %o0 - have return value set to 0
What it had become instead was
ret - go back to address in %i7 - return address of *caller*
clr %o0 - have return value set to 0
which is not good, to put it mildly - we forcibly return 0 from
csum_and_copy_{from,to}_iter() (which is what the call of that
thing had been inlined into) and do that without dropping the
stack frame of said csum_and_copy_..._iter(). Confuses the
hell out of the caller of csum_and_copy_..._iter(), obviously...
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: ab5e8b3312 "sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull block fix from Jens Axboe:
"Just a single fix for a potential divide-by-zero, introduced in this
cycle"
* tag 'block-6.6-2023-10-27' of git://git.kernel.dk/linux:
blk-throttle: check for overflow in calculate_bytes_allowed
Pull ATA fix from Damien Le Moal:
"A single patch to fix a regression introduced by the recent
suspend/resume fixes.
The regression is that ATA disks are not stopped on system shutdown,
which is not recommended and increases the disks SMART counters for
unclean power off events.
This patch fixes this by refining the recent rework of the scsi device
manage_xxx flags"
* tag 'ata-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
scsi: sd: Introduce manage_shutdown device flag
Pull x86 platform driver fix from Hans de Goede:
"A single patch to extend the AMD PMC driver DMI quirk list
for laptops which need special handling to avoid NVME s2idle
suspend/resume errors"
* tag 'platform-drivers-x86-v6.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: Add s2idle quirk for more Lenovo laptops
Tetsuo reported the following lockdep splat when the TSC synchronization
fails during CPU hotplug:
tsc: Marking TSC unstable due to check_tsc_sync_source failed
WARNING: inconsistent lock state
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
ffffffff8cfa1c78 (watchdog_lock){?.-.}-{2:2}, at: clocksource_watchdog+0x23/0x5a0
{IN-HARDIRQ-W} state was registered at:
_raw_spin_lock_irqsave+0x3f/0x60
clocksource_mark_unstable+0x1b/0x90
mark_tsc_unstable+0x41/0x50
check_tsc_sync_source+0x14f/0x180
sysvec_call_function_single+0x69/0x90
Possible unsafe locking scenario:
lock(watchdog_lock);
<Interrupt>
lock(watchdog_lock);
stack backtrace:
_raw_spin_lock+0x30/0x40
clocksource_watchdog+0x23/0x5a0
run_timer_softirq+0x2a/0x50
sysvec_apic_timer_interrupt+0x6e/0x90
The reason is the recent conversion of the TSC synchronization function
during CPU hotplug on the control CPU to a SMP function call. In case
that the synchronization with the upcoming CPU fails, the TSC has to be
marked unstable via clocksource_mark_unstable().
clocksource_mark_unstable() acquires 'watchdog_lock', but that lock is
taken with interrupts enabled in the watchdog timer callback to minimize
interrupt disabled time. That's obviously a possible deadlock scenario,
Before that change the synchronization function was invoked in thread
context so this could not happen.
As it is not crucical whether the unstable marking happens slightly
delayed, defer the call to a worker thread which avoids the lock context
problem.
Fixes: 9d349d47f0 ("x86/smpboot: Make TSC synchronization function call based")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87zg064ceg.ffs@tglx
David and a few others reported that on certain newer systems some legacy
interrupts fail to work correctly.
Debugging revealed that the BIOS of these systems leaves the legacy PIC in
uninitialized state which makes the PIC detection fail and the kernel
switches to a dummy implementation.
Unfortunately this fallback causes quite some code to fail as it depends on
checks for the number of legacy PIC interrupts or the availability of the
real PIC.
In theory there is no reason to use the PIC on any modern system when
IO/APIC is available, but the dependencies on the related checks cannot be
resolved trivially and on short notice. This needs lots of analysis and
rework.
The PIC detection has been added to avoid quirky checks and force selection
of the dummy implementation all over the place, especially in VM guest
scenarios. So it's not an option to revert the relevant commit as that
would break a lot of other scenarios.
One solution would be to try to initialize the PIC on detection fail and
retry the detection, but that puts the burden on everything which does not
have a PIC.
Fortunately the ACPI/MADT table header has a flag field, which advertises
in bit 0 that the system is PCAT compatible, which means it has a legacy
8259 PIC.
Evaluate that bit and if set avoid the detection routine and keep the real
PIC installed, which then gets initialized (for nothing) and makes the rest
of the code with all the dependencies work again.
Fixes: e179f69141 ("x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately")
Reported-by: David Lazar <dlazar@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: David Lazar <dlazar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003
Link: https://lore.kernel.org/r/875y2u5s8g.ffs@tglx
Pull powerpc fixes from Michael Ellerman:
- Fix boot crash with FLATMEM since set_ptes() introduction
- Avoid calling arch_enter/leave_lazy_mmu() in set_ptes()
Thanks to Aneesh Kumar K.V and Erhard Furtner.
* tag 'powerpc-6.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Avoid calling arch_enter/leave_lazy_mmu() in set_ptes
powerpc/mm: Fix boot crash with FLATMEM
The iommu_create_device_direct_mappings() only needs to flush the caches
when the mappings are changed in the affected domain. This is not true
for non-DMA domains, or for devices attached to the domain that have no
reserved regions. To avoid unnecessary cache invalidations, add a check
before iommu_flush_iotlb_all().
Fixes: a48ce36e27 ("iommu: Prevent RESV_DIRECT devices from blocking domains")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Henry Willard <henry.willard@oracle.com>
Link: https://lore.kernel.org/r/20231026084942.17387-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull drm fixes from Dave Airlie:
"This is the final set of fixes for 6.6, just misc bits mainly in
amdgpu and i915, nothing too noteworthy.
amdgpu:
- ignore duplicated BOs in CS parser
- remove redundant call to amdgpu_ctx_priority_is_valid()
- Extend VI APSM quirks to more platforms
amdkfd:
- reserve fence slot while locking BO
dp_mst:
- Fix NULL deref in get_mst_branch_device_by_guid_helper()
logicvc:
- Kconfig: Select REGMAP and REGMAP_MMIO
ivpu:
- Fix missing VPUIP interrupts
i915:
- Determine context valid in OA reports
- Hold GT forcewake during steering operations
- Check if PMU is closed before stopping event"
* tag 'drm-fixes-2023-10-27' of git://anongit.freedesktop.org/drm/drm:
accel/ivpu/37xx: Fix missing VPUIP interrupts
drm/amd: Disable ASPM for VI w/ all Intel systems
drm/i915/pmu: Check if pmu is closed before stopping event
drm/i915/mcr: Hold GT forcewake during steering operations
drm/logicvc: Kconfig: select REGMAP and REGMAP_MMIO
drm/i915/perf: Determine context valid in OA reports
drm/amdkfd: reserve a fence slot while locking the BO
drm/amdgpu: Remove redundant call to priority_is_valid()
drm/dp_mst: Fix NULL deref in get_mst_branch_device_by_guid_helper()
drm/amdgpu: ignore duplicate BOs again
Commit aa3998dbeb ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") change setting the manage_system_start_stop
flag to false for libata managed disks to enable libata internal
management of disk suspend/resume. However, a side effect of this change
is that on system shutdown, disks are no longer being stopped (set to
standby mode with the heads unloaded). While this is not a critical
issue, this unclean shutdown is not recommended and shows up with
increased smart counters (e.g. the unexpected power loss counter
"Unexpect_Power_Loss_Ct").
Instead of defining a shutdown driver method for all ATA adapter
drivers (not all of them define that operation), this patch resolves
this issue by further refining the sd driver start/stop control of disks
using the new flag manage_shutdown. If this new flag is set to true by
a low level driver, the function sd_shutdown() will issue a
START STOP UNIT command with the start argument set to 0 when a disk
needs to be powered off (suspended) on system power off, that is, when
system_state is equal to SYSTEM_POWER_OFF.
Similarly to the other manage_xxx flags, the new manage_shutdown flag is
exposed through sysfs as a read-write device attribute.
To avoid any confusion between manage_shutdown and
manage_system_start_stop, the comments describing these flags in
include/scsi/scsi.h are also improved.
Fixes: aa3998dbeb ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218038
Link: https://lore.kernel.org/all/cd397c88-bf53-4768-9ab8-9d107df9e613@gmail.com/
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of platforms have some last-minute fixes, in particular:
- riscv gets some fixes for noncoherent DMA on the renesas and thead
platforms and dts fix for SPI on the visionfive 2 board
- Qualcomm Snapdragon gets three dts fixes to address board specific
regressions on the pmic and gpio nodes
- Rockchip platforms get multiple dts fixes to address issues on the
recent rk3399 platform as well as the older rk3128 platform that
apparently regressed a while ago.
- TI OMAP gets some trivial code and dts fixes and a regression fix
for the omap1 ams-delta modem
- NXP i.MX firmware has one fix for a use-after-free but in its error
handling"
* tag 'soc-fixes-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
soc: renesas: ARCH_R9A07G043 depends on !RISCV_ISA_ZICBOM
riscv: only select DMA_DIRECT_REMAP from RISCV_ISA_ZICBOM and ERRATA_THEAD_PBMT
riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT
riscv: dts: thead: set dma-noncoherent to soc bus
arm64: dts: rockchip: Fix i2s0 pin conflict on ROCK Pi 4 boards
arm64: dts: rockchip: Add i2s0-2ch-bus-bclk-off pins to RK3399
clk: ti: Fix missing omap5 mcbsp functional clock and aliases
clk: ti: Fix missing omap4 mcbsp functional clock and aliases
ARM: OMAP1: ams-delta: Fix MODEM initialization failure
soc: renesas: Make ARCH_R9A07G043 depend on required options
riscv: dts: starfive: visionfive 2: correct spi's ss pin
firmware/imx-dsp: Fix use_after_free in imx_dsp_setup_channels()
ARM: OMAP: timer32K: fix all kernel-doc warnings
ARM: omap2: fix a debug printk
ARM: dts: rockchip: Fix timer clocks for RK3128
ARM: dts: rockchip: Add missing quirk for RK3128's dma engine
ARM: dts: rockchip: Add missing arm timer interrupt for RK3128
ARM: dts: rockchip: Fix i2c0 register address for RK3128
arm64: dts: rockchip: set codec system-clock-fixed on px30-ringneck-haikou
arm64: dts: rockchip: use codec as clock master on px30-ringneck-haikou
...
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi and netfilter.
Most regressions addressed here come from quite old versions, with the
exceptions of the iavf one and the WiFi fixes. No known outstanding
reports or investigation.
Fixes to fixes:
- eth: iavf: in iavf_down, disable queues when removing the driver
Previous releases - regressions:
- sched: act_ct: additional checks for outdated flows
- tcp: do not leave an empty skb in write queue
- tcp: fix wrong RTO timeout when received SACK reneging
- wifi: cfg80211: pass correct pointer to rdev_inform_bss()
- eth: i40e: sync next_to_clean and next_to_process for programming
status desc
- eth: iavf: initialize waitqueues before starting watchdog_task
Previous releases - always broken:
- eth: r8169: fix data-races
- eth: igb: fix potential memory leak in igb_add_ethtool_nfc_entry
- eth: r8152: avoid writing garbage to the adapter's registers
- eth: gtp: fix fragmentation needed check with gso"
* tag 'net-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
iavf: in iavf_down, disable queues when removing the driver
vsock/virtio: initialize the_virtio_vsock before using VQs
net: ipv6: fix typo in comments
net: ipv4: fix typo in comments
net/sched: act_ct: additional checks for outdated flows
netfilter: flowtable: GC pushes back packets to classic path
i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITR
gtp: fix fragmentation needed check with gso
gtp: uapi: fix GTPA_MAX
Fix NULL pointer dereference in cn_filter()
sfc: cleanup and reduce netlink error messages
net/handshake: fix file ref count in handshake_nl_accept_doit()
wifi: mac80211: don't drop all unprotected public action frames
wifi: cfg80211: fix assoc response warning on failed links
wifi: cfg80211: pass correct pointer to rdev_inform_bss()
isdn: mISDN: hfcsusb: Spelling fix in comment
tcp: fix wrong RTO timeout when received SACK reneging
r8152: Block future register access if register access fails
r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
r8152: Check for unplug in r8153b_ups_en() / r8153c_ups_en()
...
Renesas fixes for v6.6 (take three)
- Sort out a few Kconfig dependency issues for the rich set of RISC-V
non-coherent DMA support.
* tag 'renesas-fixes-for-v6.6-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: ARCH_R9A07G043 depends on !RISCV_ISA_ZICBOM
riscv: only select DMA_DIRECT_REMAP from RISCV_ISA_ZICBOM and ERRATA_THEAD_PBMT
riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT
Link: https://lore.kernel.org/r/cover.1698312384.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In iavf_down, we're skipping the scheduling of certain operations if
the driver is being removed. However, the IAVF_FLAG_AQ_DISABLE_QUEUES
request must not be skipped in this case, because iavf_close waits
for the transition to the __IAVF_DOWN state, which happens in
iavf_virtchnl_completion after the queues are released.
Without this fix, "rmmod iavf" takes half a second per interface that's
up and prints the "Device resources not yet released" warning.
Fixes: c8de44b577 ("iavf: do not process adminq tasks when __IAVF_IN_REMOVE_TASK is set")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231025183213.874283-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
This patch contains two late Netfilter's flowtable fixes for net:
1) Flowtable GC pushes back packets to classic path in every GC run,
ie. every second. This is because NF_FLOW_HW_ESTABLISHED is only
used by sched/act_ct (never set) and IPS_SEEN_REPLY might be unset
by the time the flow is offloaded (this status bit is only reliable
in the sched/act_ct datapath).
2) sched/act_ct logic to push back packets to classic path to reevaluate
if UDP flow is unidirectional only applies if IPS_HW_OFFLOAD_BIT is
set on and no hardware offload request is pending to be handled.
From Vlad Buslov.
These two patches fixes two problems that were introduced in the
previous 6.5 development cycle.
* tag 'nf-23-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
net/sched: act_ct: additional checks for outdated flows
netfilter: flowtable: GC pushes back packets to classic path
====================
Link: https://lore.kernel.org/r/20231025100819.2664-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once VQs are filled with empty buffers and we kick the host, it can send
connection requests. If the_virtio_vsock is not initialized before,
replies are silently dropped and do not reach the host.
virtio_transport_send_pkt() can queue packets once the_virtio_vsock is
set, but they won't be processed until vsock->tx_run is set to true. We
queue vsock->send_pkt_work when initialization finishes to send those
packets queued earlier.
Fixes: 0deab087b1 ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock")
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231024191742.14259-1-alexandru.matei@uipath.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull ACPI fix from Rafael Wysocki:
"Unbreak the ACPI NFIT driver after a recent change that inadvertently
altered its behavior (Xiang Chen)"
* tag 'acpi-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: NFIT: Install Notify() handler before getting NFIT table
When allocating a new pool at runtime, reduce the number of slabs so
that the allocation order is at most MAX_ORDER. This avoids a kernel
warning in __alloc_pages().
The warning is relatively benign, because the pool size is subsequently
reduced when allocation fails, but it is silly to start with a request
that is known to fail, especially since this is the default behavior if
the kernel is built with CONFIG_SWIOTLB_DYNAMIC=y and booted without any
swiotlb= parameter.
Reported-by: Ben Greear <greearb@candelatech.com>
Closes: https://lore.kernel.org/netdev/4f173dd2-324a-0240-ff8d-abf5c191be18@candelatech.com/
Fixes: 1aaa736815 ("swiotlb: allocate a new memory pool when existing pools are full")
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If an application does O_DIRECT writes with io_uring and the file system
supports IOCB_DIO_CALLER_COMP, then completions of the dio write side is
done from the task_work that will post the completion event for said
write as well.
Whenever a dio write is done against a file, the inode i_dio_count is
elevated. This enables other callers to use inode_dio_wait() to wait for
previous writes to complete. If we defer the full dio completion to
task_work, we are dependent on that task_work being run before the
inode i_dio_count can be decremented.
If the same task that issues io_uring dio writes with
IOCB_DIO_CALLER_COMP performs a synchronous system call that calls
inode_dio_wait(), then we can deadlock as we're blocked sleeping on
the event to become true, but not processing the completions that will
result in the inode i_dio_count being decremented.
Until we can guarantee that this is the case, then disable the deferred
caller completions.
Fixes: 099ada2c87 ("io_uring/rw: add write support for IOCB_DIO_CALLER_COMP")
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We could race with SQ thread exit, and if we do, we'll hit a NULL pointer
dereference when the thread is cleared. Grab the SQPOLL data lock before
attempting to get the task cpu and pid for fdinfo, this ensures we have a
stable view of it.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218032
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The steering control and semaphore registers are inside an "always on"
power domain with respect to RC6. However there are some issues if
higher-level platform sleep states are entering/exiting at the same time
these registers are accessed. Grabbing GT forcewake and holding it over
the entire lock/steer/unlock cycle ensures that those sleep states have
been fully exited before we access these registers.
This is expected to become a formally documented/numbered workaround
soon.
Note that this patch alone isn't expected to have an immediately
noticeable impact on MCR (mis)behavior; an upcoming pcode firmware
update will also be necessary to provide the other half of this
workaround.
v2:
- Move the forcewake inside the Xe_LPG-specific IP version check. This
should only be necessary on platforms that have a steering semaphore.
Fixes: 3100240bf8 ("drm/i915/mtl: Add hardware-level lock for steering")
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231019170241.2102037-2-matthew.d.roper@intel.com
(cherry picked from commit 8fa1c7cd1f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
drm/logicvc driver is depend on REGMAP and REGMAP_MMIO, should select this
two kconfig option, otherwise the driver failed to compile on platform
without REGMAP_MMIO selected:
ERROR: modpost: "__devm_regmap_init_mmio_clk" [drivers/gpu/drm/logicvc/logicvc-drm.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:136: Module.symvers] Error 1
make: *** [Makefile:1978: modpost] Error 2
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Fixes: efeeaefe9b ("drm: Add support for the LogiCVC display controller")
Link: https://patchwork.freedesktop.org/patch/msgid/20230608024207.581401-1-suijingfeng@loongson.cn
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
