In 'cfg80211_free_coalesce', '&coalesce->rules[i]' is a pointer
to VLA member of 'struct cfg80211_coalesce' and should never be NULL,
so redundant check may be dropped.
I think this is correct, but I haven't tested it seriously.
Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Link: https://patch.msgid.link/20241003095912.218465-1-d.kandybka@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, wiphy_verify_combinations() fails for the multi-radio per wiphy
due to the condition check on new global interface combination that DFS
only works on one channel. In a multi-radio scenario, new global interface
combination encompasses the capabilities of all radio combinations, so it
supports more than one channel with DFS. For multi-radio per wiphy,
interface combination verification needs to be performed for radio specific
interface combinations. This is necessary as the new global interface
combination combines the capabilities of all radio combinations.
Fixes: a01b1e9f99 ("wifi: mac80211: add support for DFS with multiple radios")
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20240917140239.886083-1-quic_periyasa@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As commit cbe16f35be ("genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()")
said, the code below is subobtimal. IRQF_NO_AUTOEN flag can be used by
drivers to request_irq(). It prevents the automatic enabling of the
requested interrupt in the same safe way. With that the usage can be
simplified and corrected.
irq_set_status_flags(irq, IRQ_NOAUTOEN);
request_irq(dev, irq...);
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910124314.698896-4-ruanjinjie@huawei.com
Display channel info in the RPM map debugfs output.
With this, cat /sys/kernel/debug/cn10k/rvu_pf_rpm_map
would display channel number for each device in addition to
the existing data.
Sample output:
PCI dev RVU PF Func NIX block rpm LMAC CHAN
0002:02:00.0 0x400 NIX0 rpm0 LMAC0 256
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Link: https://patch.msgid.link/20240912161450.164402-3-lcherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-09-11
The first patch is by Uwe Kleine-König targets all CAN platform driver
and switches back the remove function to struct
platform_driver::remove().
A patch by Stefan Mätje fixes the help text of the ESD USB driver.
Jake Hamby's patch masks an unneeded interrupt in the m_can driver.
The last 2 patches target the rockchip_canfd driver. Arnd Bergmann's
patch reworks the delay calculation for the timekeeping worker, a
patch by me fixes the decoding of the error code register.
* tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: rkcanfd_handle_error_int_reg_ec(): fix decoding of error code register
can: rockchip_canfd: rkcanfd_timestamp_init(): rework delay calculation
can: m_can: m_can_chip_config(): mask timestamp wraparound IRQ
can: usb: Kconfig: Fix list of devices for esd_usb driver
can: Switch back to struct platform_driver::remove()
====================
Link: https://patch.msgid.link/20240912080438.2826895-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nelson Escobar says:
====================
enic: Report per queue stats
Patch #1: Use a macro instead of static const variables for array sizes. I
didn't want to add more static const variables in the next patch
so clean up the existing ones first.
Patch #2: Collect per queue statistics
Patch #3: Report per queue stats in netdev qstats
Patch #4: Report some per queue stats in ethtool
# NETIF="eno6" tools/testing/selftests/drivers/net/stats.py
KTAP version 1
1..5
ok 1 stats.check_pause # XFAIL pause not supported by the device
ok 2 stats.check_fec # XFAIL FEC not supported by the device
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump qstats-get --json '{"ifindex": "34"}'
[{'ifindex': 34,
'rx-bytes': 66762680,
'rx-csum-unnecessary': 1009345,
'rx-hw-drop-overruns': 0,
'rx-hw-drops': 0,
'rx-packets': 1009673,
'tx-bytes': 137936674899,
'tx-csum-none': 125,
'tx-hw-gso-packets': 2408712,
'tx-needs-csum': 2431531,
'tx-packets': 15475466,
'tx-stop': 0,
'tx-wake': 0}]
v2: https://lore.kernel.org/20240905010900.24152-1-neescoba@cisco.com
v1: https://lore.kernel.org/20240823235401.29996-1-neescoba@cisco.com
====================
Link: https://patch.msgid.link/20240912005039.10797-1-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
net: fib_rules: Add DSCP selector support
Currently, the kernel rejects IPv4 FIB rules that try to match on the
upper three DSCP bits:
# ip -4 rule add tos 0x1c table 100
# ip -4 rule add tos 0x3c table 100
Error: Invalid tos.
The reason for that is that historically users of the FIB lookup API
only populated the lower three DSCP bits in the TOS field of the IPv4
flow key ('flowi4_tos'), which fits the TOS definition from the initial
IPv4 specification (RFC 791).
This is not very useful nowadays and instead some users want to be able
to match on the six bits DSCP field, which replaced the TOS and IP
precedence fields over 25 years ago (RFC 2474). In addition, the current
behavior differs between IPv4 and IPv6 which does allow users to match
on the entire DSCP field using the TOS selector.
Recent patchsets made sure that callers of the FIB lookup API now
populate the entire DSCP field in the IPv4 flow key. Therefore, it is
now possible to extend FIB rules to match on DSCP.
This is done by adding a new DSCP attribute which is implemented for
both IPv4 and IPv6 to provide user space programs a consistent behavior
between both address families.
The behavior of the old TOS selector is unchanged and IPv4 FIB rules
using it will only match on the lower three DSCP bits. The kernel will
reject rules that try to use both selectors.
Patch #1 adds the new DSCP attribute but rejects its usage.
Patches #2-#3 implement IPv4 and IPv6 support.
Patch #4 allows user space to use the new attribute.
Patches #5-#6 add selftests.
====================
Link: https://patch.msgid.link/20240911093748.3662015-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that locally generated traffic from a socket that specifies a DS
Field using the IP_TOS / IPV6_TCLASS socket options is correctly
redirected using a FIB rule that matches on DSCP. Add negative tests to
verify that the rule is not it when it should not. Test with both IPv4
and IPv6 and with both TCP and UDP sockets.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240911093748.3662015-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
