In Xe3p there is an HW optimization done. When there is an SU triggered in
Capture state, Link will be kept ON post Capture CRC SDP. Before valid SU
pixels Intel source will transmit dummy pixels. Some TCONS are improperly
considering these dummy pixels as a valid pixel data. Prior Xe3p link was
was turned off even if there was SU triggered in capture state and no dummy
pixels were transmitted. These dummy pixels are problem only if SDP on
prior scanline is used and Early Transport is not in use. The workaround is
to start SU area always at scanline 0.
v2: use intel_display_wa
Bspec: 74741, 79482
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260515095756.2799483-5-jouni.hogander@intel.com
EDP specification says:
"If either VSC SDP is unable to be transmitted 100 ns before the SU region,
the Source device may optionally transmit the VSC SDP during the prior
video scan line’s HBlank period There is a Intel specific drm dp register
currently containing bits related how TCON can support PSR2 with SDP on
prior line."
Unfortunately many panels are having problems in implementing this. So
there is a custom Intel specific DPCD register (INTEL_WA_REGISTER_CAPS) to
figure out if this is properly implemented on a panel or if panel doesn't
require that 100 ns delay before the SU region. Here are the definitions in
this custom DPCD address:
0 = Panel doesn't support SDP on prior line
1 = Panel supports SDP on prior line
2 = Panel doesn't have 100ns requirement
3 = Reserved
Add definitions for this new register and it's values into new header
intel_dpcd.h.
v2: add INTEL_DPCD_ prefix to definitions
Bspec: 74741
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260515095756.2799483-2-jouni.hogander@intel.com
Introduce display irq hooks with struct intel_display_irq_funcs, and add
the ->reset hook as the first thing. Call the reset hooks from i915 and
xe core via intel_display_irq_reset().
Relocate the gen8 and gen11 HAS_DISPLAY() check to
intel_display_irq_reset(), as the funcs pointer won't be initialized for
no display.
Note: We're increasingly moving to the territory of not touching display
at all if there's no display or it has been fused off. Which is good,
but care must be taken to not have hardware setup required also for no
display cases in display code. Also note that the line is fuzzy for
older platforms, but there we also don't have fusing.
v2:
- make the structs static const (Sashiko)
- relocate HAS_DISPLAY() (Sashiko)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/f9d75e8af92b5550a9d07f29491be5313b7c866b.1778688699.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The xe driver keeps track of whether to probe display, and whether
display hardware is there, using xe->info.probe_display. It gets set to
false if there's no display after intel_display_device_probe(). However,
the display may also be disabled via fuses, detected at a later time in
intel_display_device_info_runtime_init().
In this case, the xe driver does for_each_intel_crtc() on uninitialized
mode config in xe_display_flush_cleanup_work(), leading to a NULL
pointer dereference, and generally calls display code with display info
cleared.
Check for intel_display_device_present() after
intel_display_device_info_runtime_init(), and reset
xe->info.probe_display as necessary. Also do unset_display_features()
for completeness, although display runtime init has already done
that. This will need to be unified across all cases later.
Move intel_display_device_info_runtime_init() call slightly earlier,
similar to i915, to avoid a bunch of unnecessary setup for no display
cases.
Note #1: The xe driver has no business doing low level display plumbing
like for_each_intel_crtc() to begin with. It all needs to happen in
display code.
Note #2: The actual bug is present already in commit 44e694958b
("drm/xe/display: Implement display support"), but the oops was likely
introduced later at commit ddf6492e0e ("drm/xe/display: Make display
suspend/resume work on discrete").
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/7904
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/6150
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260515160920.1082842-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
- A Revert of a Kconfig patch that broke some builds (Jani)
- New fb_pin abstraction for xe and i915 fb transparent handling (Ville, Tvrtko)
- Skip inactive MST connectors on HDCP cases (Suraj)
- Reduce redundant intel_panel_fixed_mode (Ankit)
- Some general fixes (Imre, Chaitanya)
- Reorganize display documentation (Jani)
- Start switching to display specific reg types (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/agXbLMtMECnKy-YV@intel.com
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Update fourcc descriptions of BG(R) floating formats.
- Add deferred mapping support to virtio.
Cross-subsystem Changes:
- Update lontium lt9211 bindings.
Core Changes:
- Bugfixes and cleanups to pagemap, dp/mst.
- Add lockdep annotations to gpu buddy manager.
- Updates to drm/dp for PR + VRR.
- Improve documentation's table of contents.
- Bump fpfn and lpfn in ttm to 64-bits.
Driver Changes:
- Assorted bugfixes, cleanups and updates to panthor, nouveau, qaic,
hisilicon.
- Add support for CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5, IVO
R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F, AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels.
- More implementation of AIE4 in amdxdna.
- Update panels to use refcounts instead of devm_kzalloc to make
drm_panel_init static.
- Add support for the RCade Display Adapter to gud.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/98788814-e462-4950-bb2a-ea493c30d0c0@linux.intel.com
If userspace never maps GEM object, then BO wastes hostmem space
because VirtIO-GPU driver maps VRAM BO at the BO's creating time.
Make mappings on-demand by adding new RESOURCE_CREATE_BLOB IOCTL/UAPI
hinting flag telling that host mapping should be deferred until first
mapping is made when the flag is set by userspace.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patch.msgid.link/20260501000043.2483678-1-dmitry.osipenko@collabora.com
Some of the GPU documentation pages are quite long, with various levels
of details. Add document internal tables of contents to the larger
documents to make them easier to navigate.
The index.rst in the sub-directories have toctrees, which provide
similar overviews.
Fix one missing newline at the end of drm-uapi.rst while at it,
primarily because rst should have it, and secondarily because my editor
rst mode refuses to save the file without it.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/e3f9357c0e8198cc48e69e2a3b8ca072c7ab92ca.1778238671.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Our chip support KVM over IP feature, so hibmc driver need to support
displaying without any connectors plugged in. If no connectors are
connected, the vdac connector status should be set to 'connected' to
ensure proper KVM display functionality. Additionally, for
previous-generation products that may lack hardware link support and
thus cannot detect the monitor, the same approach should be applied
to ensure VGA display functionality.
* Add phys_state in the struct of dp and vdac to check physical outputs.
* The 'epoch_counter' of the vdac connector is incremented when the
physical status changes.
For get_modes: using BMC modes for connector if no display is attached to
phys VGA cable, otherwise use EDID modes by drm_connector_helper_get_modes,
because KVM doesn't provide EDID reads.
The polling mechanism for the KMS helper is enabled.
Fixes: 4c962bc929 ("drm/hisilicon/hibmc: Add vga connector detect functions")
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Closes: https://lore.kernel.org/all/0eb5c509-2724-4c57-87ad-74e4270d5a5a@suse.de/
Signed-off-by: Lin He <helin52@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260509032302.2057227-3-shiyongbang@huawei.com
To perform copy, based on whether the platform supports service copy
engines, either MEM_COPY or XY_FAST_COPY_BLT instruction is used.
Length of both the instructions is same today and so they use a common
define EMIT_COPY_DW.
This is not true for the future platforms. Implement separate functions
which return the length of the instruction to help in preparing for it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260511123746.616662-8-balasubramani.vivekanandan@intel.com
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
