Change the default RX/TX ITR for wx_mac_em devices from 20K to 7K, which
is an experience value from out-of-tree ngbe driver, to get higher
performance on some platforms with weak single-core performance.
TCP_SRTEAM test on Phytium 2000+ shows that the throughput of 64-Byte
packets is increased from 350.53Mbits/s to 395.92Mbits/s.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250821023408.53472-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fan Gong says:
====================
net: hinic3: Add a driver for Huawei 3rd gen NIC - management interfaces
This is the 2/3 patch of the patch-set described below.
The patch-set contains driver for Huawei's 3rd generation HiNIC
Ethernet device that will be available in the future.
This is an SRIOV device, designed for data centers.
Initially, the driver only supports VFs.
Following the discussion over RFC01, the code will be submitted in
separate smaller patches where until the last patch the driver is
non-functional. The RFC02 submission contains overall view of the entire
driver but every patch will be posted as a standalone submission.
====================
Link: https://patch.msgid.link/cover.1755673097.git.zhuyikai1@h-partners.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dimitri Daskalakis says:
====================
selftests: Test XDP_TX for single-buffer
Ensure single buffer XDP functions correctly by covering the following cases:
1) Zero size payload
2) Full MTU
3) Single buffer packets through a multi-buffer XDP program
These changes were tested with netdevsim and fbnic.
# ./ksft-net-drv/drivers/net/xdp.py
TAP version 13
1..10
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_sb
ok 6 xdp.test_xdp_native_tx_mb
# Failed run: pkt_sz 2048, offset 1. Last successful run: pkt_sz 1024, offset 256. Reason: Adjustment failed
ok 7 xdp.test_xdp_native_adjst_tail_grow_data
ok 8 xdp.test_xdp_native_adjst_tail_shrnk_data
# Failed run: pkt_sz 512, offset -256. Last successful run: pkt_sz 512, offset -128. Reason: Adjustment failed
ok 9 xdp.test_xdp_native_adjst_head_grow_data
# Failed run: pkt_sz (2048) > HDS threshold (1536) and offset 64 > 48
ok 10 xdp.test_xdp_native_adjst_head_shrnk_data
# Totals: pass:10 fail:0 xfail:0 xpass:0 skip:0 error:0
====================
Link: https://patch.msgid.link/20250821014023.1481662-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NIX block receives traffic from multiple channels, including:
MAC block (RPM)
Loopback module (LBK)
CPT block
RPM
|
-----------------
LBK --| NIX |
-----------------
|
CPT
Due to a hardware errata, CN10k and earlier Octeon silicon series,
the hardware may incorrectly assert XOFF on certain channels during
reset. As a workaround, a write operation to the NIX_AF_RX_CHANX_CFG
register can be performed to broadcast XON signals on the affected
channels
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250820064625.1464361-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Declare PP_FLAG_ALLOW_UNREADABLE_NETMEM to turn on unreadable netmem
support in GVE.
We also drop any net_iov packets where header split is not enabled.
We're unable to process packets where the header landed in unreadable
netmem.
Use page_pool_dma_sync_netmem_for_cpu in lieu of
dma_sync_single_range_for_cpu to correctly handle unreadable netmem
that should not be dma-sync'd.
Disable rx_copybreak optimization if payload is unreadable netmem as
that needs access to the payload.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250818210507.3781705-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal says:
====================
netfilter: updates for net-next
First patch gets rid of refcounting for dying list dumping,
use a cookie value instead of keeping the object around.
Remaining patches extend nftables pipapo (concatenated ranges) set type.
Make the AVX2 optimized version available from the control plane as
well, then use it during insert. This gives a nice speedup for large
sets. All from myself.
On PREEMPT_RT, we can't rely on local_bh_disable to protect the
access to the percpu scratch maps. Use nested-BH locking for this,
From Sebastian Siewior.
* tag 'nf-next-25-08-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nft_set_pipapo: Use nested-BH locking for nft_pipapo_scratch
netfilter: nft_set_pipapo: Store real pointer, adjust later.
netfilter: nft_set_pipapo: use avx2 algorithm for insertions too
netfilter: nft_set_pipapo_avx2: split lookup function in two parts
netfilter: nft_set_pipapo_avx2: Drop the comment regarding protection
netfilter: ctnetlink: remove refcounting in dying list dumping
====================
Link: https://patch.msgid.link/20250820144738.24250-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xichao Zhao says:
====================
net: Remove the use of dev_err_probe()
The dev_err_probe() doesn't do anything when error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just
return the value instead.
====================
Link: https://patch.msgid.link/20250820085749.397586-1-zhao.xichao@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-08-21
We've added 9 non-merge commits during the last 3 day(s) which contain
a total of 13 files changed, 1027 insertions(+), 27 deletions(-).
The main changes are:
1) Added bpf dynptr support for accessing the metadata of a skb,
from Jakub Sitnicki.
The patches are merged from a stable branch bpf-next/skb-meta-dynptr.
The same patches have also been merged into bpf-next/master.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Cover metadata access from a modified skb clone
selftests/bpf: Cover read/write to skb metadata at an offset
selftests/bpf: Cover write access to skb metadata via dynptr
selftests/bpf: Cover read access to skb metadata via dynptr
selftests/bpf: Parametrize test_xdp_context_tuntap
selftests/bpf: Pass just bpf_map to xdp_context_test helper
selftests/bpf: Cover verifier checks for skb_meta dynptr type
bpf: Enable read/write access to skb metadata through a dynptr
bpf: Add dynptr type for skb metadata
====================
Link: https://patch.msgid.link/20250821191827.2099022-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth.
Current release - fix to a fix:
- usb: asix_devices: fix PHY address mask in MDIO bus initialization
Current release - regressions:
- Bluetooth: fixes for the split between BIS_LINK and PA_LINK
- Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN
flag", breaks compatibility with some existing device tree blobs
- dsa: b53: fix reserved register access in b53_fdb_dump()
Current release - new code bugs:
- sched: dualpi2: run probability update timer in BH to avoid
deadlock
- eth: libwx: fix the size in RSS hash key population
- pse-pd: pd692x0: improve power budget error paths and handling
Previous releases - regressions:
- tls: fix handling of zero-length records on the rx_list
- hsr: reject HSR frame if skb can't hold tag
- bonding: fix negotiation flapping in 802.3ad passive mode
Previous releases - always broken:
- gso: forbid IPv6 TSO with extensions on devices with only IPV6_CSUM
- sched: make cake_enqueue return NET_XMIT_CN when past buffer_limit,
avoid packet drops with low buffer_limit, remove unnecessary WARN()
- sched: fix backlog accounting after modifying config of a qdisc in
the middle of the hierarchy
- mptcp: improve handling of skb extension allocation failures
- eth: mlx5:
- fixes for the "HW Steering" flow management method
- fixes for QoS and device buffer management"
* tag 'net-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: nf_reject: don't leak dst refcount for loopback packets
net/mlx5e: Preserve shared buffer capacity during headroom updates
net/mlx5e: Query FW for buffer ownership
net/mlx5: Restore missing scheduling node cleanup on vport enable failure
net/mlx5: Fix QoS reference leak in vport enable error path
net/mlx5: Destroy vport QoS element when no configuration remains
net/mlx5e: Preserve tc-bw during parent changes
net/mlx5: Remove default QoS group and attach vports directly to root TSAR
net/mlx5: Base ECVF devlink port attrs from 0
net: pse-pd: pd692x0: Skip power budget configuration when undefined
net: pse-pd: pd692x0: Fix power budget leak in manager setup error path
Octeontx2-af: Skip overlap check for SPI field
selftests: tls: add tests for zero-length records
tls: fix handling of zero-length records on the rx_list
net: airoha: ppe: Do not invalid PPE entries in case of SW hash collision
selftests: bonding: add test for passive LACP mode
bonding: send LACPDUs periodically in passive mode after receiving partner's LACPDU
bonding: update LACP activity flag after setting lacp_active
Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN flag"
ipv6: sr: Fix MAC comparison to be constant-time
...
recent patches to add a WARN() when replacing skb dst entry found an
old bug:
WARNING: include/linux/skbuff.h:1165 skb_dst_check_unset include/linux/skbuff.h:1164 [inline]
WARNING: include/linux/skbuff.h:1165 skb_dst_set include/linux/skbuff.h:1210 [inline]
WARNING: include/linux/skbuff.h:1165 nf_reject_fill_skb_dst+0x2a4/0x330 net/ipv4/netfilter/nf_reject_ipv4.c:234
[..]
Call Trace:
nf_send_unreach+0x17b/0x6e0 net/ipv4/netfilter/nf_reject_ipv4.c:325
nft_reject_inet_eval+0x4bc/0x690 net/netfilter/nft_reject_inet.c:27
expr_call_ops_eval net/netfilter/nf_tables_core.c:237 [inline]
..
This is because blamed commit forgot about loopback packets.
Such packets already have a dst_entry attached, even at PRE_ROUTING stage.
Instead of checking hook just check if the skb already has a route
attached to it.
Fixes: f53b9b0bdc ("netfilter: introduce support for reject at prerouting stage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250820123707.10671-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When port buffer headroom changes, port_update_shared_buffer()
recalculates the shared buffer size and splits it in a 3:1 ratio
(lossy:lossless) - Currently, the calculation is:
lossless = shared / 4;
lossy = (shared / 4) * 3;
Meaning, the calculation dropped the remainder of shared % 4 due to
integer division, unintentionally reducing the total shared buffer
by up to three cells on each update. Over time, this could shrink
the buffer below usable size.
Fix it by changing the calculation to:
lossless = shared / 4;
lossy = shared - lossless;
This retains all buffer cells while still approximating the
intended 3:1 split, preventing capacity loss over time.
While at it, perform headroom calculations in units of cells rather than
in bytes for more accurate calculations avoiding extra divisions.
Fixes: a440030d89 ("net/mlx5e: Update shared buffer along with device buffer changes")
Signed-off-by: Armen Ratner <armeng@nvidia.com>
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250820133209.389065-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SW currently saves local buffer ownership when setting
the buffer.
This means that the SW assumes it has ownership of the buffer
after the command is set.
If setting the buffer fails and we remain in FW ownership,
the local buffer ownership state incorrectly remains as SW-owned.
This leads to incorrect behavior in subsequent PFC commands,
causing failures.
Instead of saving local buffer ownership in SW,
query the FW for buffer ownership when setting the buffer.
This ensures that the buffer ownership state is accurately
reflected, avoiding the issues caused by incorrect ownership
states.
Fixes: ecdf2dadee ("net/mlx5e: Receive buffer support for DCBX")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-8-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a VF has been configured and the user later clears all QoS settings,
the vport element remains in the firmware QoS tree. This leads to
inconsistent behavior compared to VFs that were never configured, since
the FW assumes that unconfigured VFs are outside the QoS hierarchy.
As a result, the bandwidth share across VFs may differ, even though
none of them appear to have any configuration.
Align the driver behavior with the FW expectation by destroying the
vport QoS element when all configurations are removed.
Fixes: c9497c9890 ("net/mlx5: Add support for setting VF min rate")
Fixes: cf7e73770d ("net/mlx5: Manage TC arbiter nodes and implement full support for tc-bw")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250820133209.389065-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When changing parent of a node/leaf with tc-bw configured, the code
saves and restores tc-bw values. However, it was reading the converted
hardware bw_share values (where 0 becomes 1) instead of the original
user values, causing incorrect tc-bw calculations after parent change.
Store original tc-bw values in the node structure and use them directly
for save/restore operations.
Fixes: cf7e73770d ("net/mlx5: Manage TC arbiter nodes and implement full support for tc-bw")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the driver creates a default group (`node0`) and attaches
all vports to it unless the user explicitly sets a parent group. As a
result, when a user configures tx_share on a group and tx_share on
a VF, the expectation is for the group and the VF to share bandwidth
relatively. However, since the VF is not connected to the same parent
(but to the default node), the proportional share logic is not applied
correctly.
To fix this, remove the default group (`node0`) and instead connect
vports directly to the root TSAR when no parent is specified. This
ensures that vports and groups share the same root scheduler and their
tx_share values are compared directly under the same hierarchy.
Fixes: 0fe132eac3 ("net/mlx5: E-switch, Allow to add vports to rate groups")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the power supply's power budget is not defined in the device tree,
the current code still requests power and configures the PSE manager
with a 0W power limit, which is undesirable behavior.
Skip power budget configuration entirely when the budget is zero,
avoiding unnecessary power requests and preventing invalid 0W limits
from being set on the PSE manager.
Fixes: 359754013e ("net: pse-pd: pd692x0: Add support for PSE PI priority feature")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250820133321.841054-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a resource leak where manager power budgets were freed on both
success and error paths during manager setup. Power budgets should
only be freed on error paths after regulator registration or during
driver removal.
Refactor cleanup logic by extracting OF node cleanup and power budget
freeing into separate helper functions for better maintainability.
Fixes: 359754013e ("net: pse-pd: pd692x0: Add support for PSE PI priority feature")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250820132708.837255-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Octeontx2/CN10K silicon supports generating a 256-bit key per packet.
The specific fields to be extracted from a packet for key generation
are configurable via a Key Extraction (MKEX) Profile.
The AF driver scans the configured extraction profile to ensure that
fields from upper layers do not overwrite fields from lower layers in
the key.
Example Packet Field Layout:
LA: DMAC + SMAC
LB: VLAN
LC: IPv4/IPv6
LD: TCP/UDP
Valid MKEX Profile Configuration:
LA -> DMAC -> key_offset[0-5]
LC -> SIP -> key_offset[20-23]
LD -> SPORT -> key_offset[30-31]
Invalid MKEX profile configuration:
LA -> DMAC -> key_offset[0-5]
LC -> SIP -> key_offset[20-23]
LD -> SPORT -> key_offset[2-3] // Overlaps with DMAC field
In another scenario, if the MKEX profile is configured to extract
the SPI field from both AH and ESP headers at the same key offset,
the driver rejecting this configuration. In a regular traffic,
ipsec packet will be having either AH(LD) or ESP (LE). This patch
relaxes the check for the same.
Fixes: 12aa0a3b93 ("octeontx2-af: Harden rule validation.")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250820063919.1463518-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
