Replace <linux/fb.h> with a forward declaration in <asm/backlight.h> to
resolve an unnecessary dependency. Remove pmac_backlight_curve_lookup()
and struct fb_info from source and header files. The function and the
framebuffer struct are unused. No functional changes.
v3:
* Add Fixes tag (Christophe)
* fix typos in commit message (Jani)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d565dd3b08 ("[PATCH] powerpc: More via-pmu backlight fixes")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # (powerpc)
Link: https://patchwork.freedesktop.org/patch/msgid/20240306122935.10626-4-tzimmermann@suse.de
Updates for v6.9:
Core:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
DP:
- Refactor parser and power submodules
DSI:
- Clean up obsolete set_split_display support
- Update DSC documentation
MDP5:
- Clean up obsolete set_split_display support
GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtCq=CObbqKNOswWZdPw5dL8jq8BxD_hxP7kOCePUwNrg@mail.gmail.com
It's possible that mtk_crtc->event is NULL in
mtk_drm_crtc_finish_page_flip().
pending_needs_vblank value is set by mtk_crtc->event, but in
mtk_drm_crtc_atomic_flush(), it's is not guarded by the same
lock in mtk_drm_finish_page_flip(), thus a race condition happens.
Consider the following case:
CPU1 CPU2
step 1:
mtk_drm_crtc_atomic_begin()
mtk_crtc->event is not null,
step 1:
mtk_drm_crtc_atomic_flush:
mtk_drm_crtc_update_config(
!!mtk_crtc->event)
step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip:
lock
mtk_crtc->event set to null,
pending_needs_vblank set to false
unlock
pending_needs_vblank set to true,
step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip called again,
pending_needs_vblank is still true
//null pointer
Instead of guarding the entire mtk_drm_crtc_atomic_flush(), it's more
efficient to just check if mtk_crtc->event is null before use.
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240223212404.3709690-1-hsinyi@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
If an eDP panel is not powered on then any attempts to talk to it over
the DP AUX channel will timeout. Unfortunately these attempts may be
quite slow. Userspace can initiate these attempts either via a
/dev/drm_dp_auxN device or via the created i2c device.
Making the DP AUX drivers timeout faster is a difficult proposition.
In theory we could just poll the panel's HPD line in the AUX transfer
function and immediately return an error there. However, this is
easier said than done. For one thing, there's no hard requirement to
hook the HPD line up for eDP panels and it's OK to just delay a fixed
amount. For another thing, the HPD line may not be fast to probe. On
parade-ps8640 we need to wait for the bridge chip's firmware to boot
before we can get the HPD line and this is a slow process.
The fact that the transfers are taking so long to timeout is causing
real problems. The open source fwupd daemon sometimes scans DP busses
looking for devices whose firmware need updating. If it happens to
scan while a panel is turned off this scan can take a long time. The
fwupd daemon could try to be smarter and only scan when eDP panels are
turned on, but we can also improve the behavior in the kernel.
Let's let eDP panels drivers specify that a panel is turned off and
then modify the common AUX transfer code not to attempt a transfer in
this case.
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Eizan Miyamoto <eizan@chromium.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202141109.1.I24277520ac754ea538c9b14578edc94e1df11b48@changeid
The TBT DP tunnel BW request logic in the Thunderbolt Connection Manager
depends on the GFX driver reading out the sink's DPRX capabilities in
response to a long HPD pulse. Since in i915 this read-out can be blocked
by another connector's/encoder's hotplug event handling (which is
serialized by drm_mode_config::connection_mutex), do a dummy DPRX read-out
in the encoder's HPD pulse handler (which is not blocked by other
encoders).
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-21-imre.deak@intel.com
Suspend and resume DP tunnels during system suspend/resume, disabling
the BW allocation mode during suspend, re-enabling it after resume. This
reflects the link's BW management component (Thunderbolt CM) disabling
BWA during suspend. Before any BW requests the driver must read the
sink's DPRX capabilities (since the BW manager requires this
information, so snoops for it on AUX), so ensure this read takes place.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-20-imre.deak@intel.com
Add the atomic state during a modeset required to enable the DP tunnel
BW allocation mode on links where such a tunnel was detected. This state
applies to an already enabled output, the state added for a newly
enabled output will be computed and added/cleared to/from the atomic
state in a follow-up patch.
v2:
- s/old_crtc_state/crtc_state in intel_crtc_duplicate_state().
- Move intel_dp_tunnel_atomic_cleanup_inherited_state() to a follow-up
patch adding the corresponding state. (Ville)
- Move intel_dp_tunnel_atomic_clear_stream_bw() to a follow-up
patch adding the corresponding state.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220211841.448846-14-imre.deak@intel.com
Add support to enable the DP tunnel BW allocation mode. Follow-up
patches will call the required helpers added here to prepare for a
modeset on a link with DP tunnels, the last change in the patchset
actually enabling BWA.
With BWA enabled, the driver will expose the full mode list a display
supports, regardless of any BW limitation on a shared (Thunderbolt)
link. Such BW limits will be checked against only during a modeset, when
the driver has the full knowledge of each display's BW requirement.
If the link BW changes in a way that a connector's modelist may also
change, userspace will get a hotplug notification for all the connectors
sharing the same link (so it can adjust the mode used for a display).
The BW limitation can change at any point, asynchronously to modesets
on a given connector, so a modeset can fail even though the atomic check
for it passed. In such scenarios userspace will get a bad link
notification and in response is supposed to retry the modeset.
v2:
- Fix old vs. new connector state in intel_dp_tunnel_atomic_check_state().
(Ville)
- Fix propagating the error from
intel_dp_tunnel_atomic_compute_stream_bw(). (Ville)
- Move tunnel==NULL checks from driver to DRM core helpers. (Ville)
- Simplify return flow from intel_dp_tunnel_detect(). (Ville)
- s/dp_tunnel_state/inherited_dp_tunnels (Ville)
- Simplify struct intel_dp_tunnel_inherited_state. (Ville)
- Unconstify object pointers (vs. states) where possible. (Ville)
- Init crtc_state while declaring it in check_group_state(). (Ville)
- Join obj->base.id, obj->name arg lines in debug prints to reduce LOC.
(Ville)
- Add/rework intel_dp_tunnel_atomic_alloc_bw() to prepare for moving the
BW allocation from encoder hooks up to intel_atomic_commit_tail()
later in the patchset.
- Disable BW alloc mode during system suspend.
- Allocate the required BW for all tunnels during system resume.
- Add intel_dp_tunnel_atomic_clear_stream_bw() instead of the open-coded
sequence in a follow-up patch.
- Add function documentation to all exported functions.
- Add CONFIG_USB4 dependency to CONFIG_DRM_I915_DP_TUNNEL.
v3:
- Rebase on intel_dp_get_active_pipes() change in previous patch.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-4-imre.deak@intel.com
Sync instead of only try-sync non-blocking commits when getting the
active pipes through a given DP port. Atm intel_dp_get_active_pipes()
will only try to sync a given pipe and if that would block ignore the
pipe. This was supposed to avoid link retraining in case a pending
modeset would do that anyway, however that could incorrectly ignore
fastset pipes as well for instance (which don't retraing the link).
The TC port reset path needs to handle all pipes, even if a waiting for
a pending commit would block. To account for the above cases sync all
the pipes unconditionally.
This also prepares for a follow-up change enabling the DP tunnel BW
allocation mode which needs to ensure that all active pipes are synced
and returned from intel_dp_get_active_pipes().
v2:
- Add a separate function to try-sync the pipes. (Ville)
v3:
- Just sync the pipes unconditionally in intel_dp_get_active_pipes().
(Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v2)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226185246.1276018-3-imre.deak@intel.com
