smatch reports several warnings:
drivers/scsi/be2iscsi/be_main.c:148:1: warning:
symbol 'dev_attr_beiscsi_log_enable' was not declared. Should it be static?
drivers/scsi/be2iscsi/be_main.c:158:1: warning:
symbol 'dev_attr_beiscsi_drvr_ver' was not declared. Should it be static?
drivers/scsi/be2iscsi/be_main.c:159:1: warning:
symbol 'dev_attr_beiscsi_adapter_family' was not declared. Should it be static?
drivers/scsi/be2iscsi/be_main.c:160:1: warning:
symbol 'dev_attr_beiscsi_fw_ver' was not declared. Should it be static?
drivers/scsi/be2iscsi/be_main.c:161:1: warning:
symbol 'dev_attr_beiscsi_phys_port' was not declared. Should it be static?
drivers/scsi/be2iscsi/be_main.c:162:1: warning:
symbol 'dev_attr_beiscsi_active_session_count' was not declared. Should it be static?
drivers/scsi/be2iscsi/be_main.c:164:1: warning:
symbol 'dev_attr_beiscsi_free_session_count' was not declared. Should it be static ?
These variables are only used in be_main.c, so should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230314005157.536918-1-trix@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bjorn Helgaas <helgaas@kernel.org> says:
Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is native"),
which appeared in v6.0, the PCI core has enabled PCIe error reporting for
all devices during enumeration.
Remove driver code to do this and remove unnecessary includes of
<linux/aer.h> from several other drivers.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since commit f26e58bf6f ("PCI/AER: Enable error reporting when
AER is native"), the PCI core does this for all devices during enumeration,
so the driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307182842.870378-11-helgaas@kernel.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Manish Rangankar <mrangankar@marvell.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since commit f26e58bf6f ("PCI/AER: Enable error reporting when
AER is native"), the PCI core does this for all devices during enumeration,
so the driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307182842.870378-10-helgaas@kernel.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since commit f26e58bf6f ("PCI/AER: Enable error reporting when
AER is native"), the PCI core does this for all devices during enumeration,
so the driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307182842.870378-9-helgaas@kernel.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: MPT-FusionLinux.pdl@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since commit f26e58bf6f ("PCI/AER: Enable error reporting when
AER is native"), the PCI core does this for all devices during enumeration,
so the driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307182842.870378-8-helgaas@kernel.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since commit f26e58bf6f ("PCI/AER: Enable error reporting when
AER is native"), the PCI core does this for all devices during enumeration,
so the driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307182842.870378-5-helgaas@kernel.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since commit f26e58bf6f ("PCI/AER: Enable error reporting when
AER is native"), the PCI core does this for all devices during enumeration,
so the driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307182842.870378-4-helgaas@kernel.org
Cc: Ketan Mukadam <ketan.mukadam@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since commit f26e58bf6f ("PCI/AER: Enable error reporting when
AER is native"), the PCI core does this for all devices during enumeration,
so the driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Also remove pci_disable_pcie_error_reporting() from the .error_detected()
path, which was added by commit 5c63f7f710 ("aacraid: Added EEH support")
but looks unnecessary. Error reporting will be disabled by the device
reset and will be re-enabled by the pci_restore_state() in
aac_pci_slot_reset().
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307182842.870378-2-helgaas@kernel.org
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Cc: Tomas Henzl <thenzl@redhat.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
chenxiang <chenxiang66@hisilicon.com> says:
To support IO_URING IOPOLL support for hisi_sas, we need to:
- Add and fill mq_poll interface to poll queue;
- Ensure internal I/Os (including internal abort I/Os) are delivered and
completed through non-iopoll queue (queue 0);
Sending internal abort commands to non-poll queue actually requires to
sending the abort command to every queue. This carries a a risk. Make iopoll
support module parameter "experimental".
I have tested performance on v3 hw with different modes as follows. 4K
READs and 4K WRITEs both see an improvement when enabling poll mode:
4K READ 4K RANDREAD 4K WRITE 4K RANDWRITE
interrupt + libaio 1770k 1316k 1197k 831k
interrupt + io_uring 1848k 1390k 1238k 857k
iopoll + io_uring 2117k 1364k 1874k 849k
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently we sync irq to avoid freeing task before using task in I/O
completion. After adding io_uring support, we need to do something similar
for poll queues. As the process of CQ entries on poll queue are protected
by spinlock cq->lock, we can use spin_lock() + spin_unlock() on cq->lock to
make sure that CQ entries are processed to completion and then the complete
queue is synced.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1678169355-76215-4-git-send-email-chenxiang66@hisilicon.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a module parameter to set how many queues are used for iopoll. Also
fill the interface mq_poll. For internal I/Os from libsas and libata we use
non-iopoll queue (queue 0) to deliver and complete them. But for internal
abort I/Os, just don't send them for poll queues.
There is still a risk associated as this sends internal abort commands to
non-iopoll queues which actually requires sending an internal abort command
to every queue. As a result, make the module parameter as "experimental"
for now.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1678169355-76215-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dmitry Bogdanov <d.bogdanov@yadro.com> says:
SAM-5 4.6.5.2 (Relative Port Identifier attribute) defines the attribute as
unique across SCSI target ports:
The Relative Port Identifier attribute identifies a SCSI target port or a
SCSI initiator port relative to other SCSI ports in a SCSI target device
and any SCSI initiator devices contained within that SCSI target device. A
SCSI target device may assign relative port identifiers to its SCSI target
ports and any SCSI initiator ports. If relative port identifiers are
assigned, the SCSI target device shall assign each of its SCSI target
ports and any SCSI initiator ports a unique relative port identifier from
1 to 65 535. SCSI target ports and SCSI initiator ports share the same
number space.
In the current TCM implementation, auto-incremented lun_rtpi weakly follows
the model outlined by SAM-5 and SPC-4. In case of multiple SCSI target
ports (se_portal_groups), which is common to scenario with multiple HBAs or
multiple iSCSI/FC targets, it's possible to have two backstores (se_devices)
with different values of lun_rtpi on the same SCSI target port.
Similar issue happens during re-export. If a LUN of a backstore is removed
from a target port and added again to the same target port, RTPI is
incremented again and will be different from the first time.
The two issues happen because each se_device increments RTPI for its own
LUNs independently.
The behaviour means that a SCSI application client can't reliably make any
sense of RTPI values reported by a LUN as it's not really related to SCSI
target ports. A conforming target implementation must ensure that RTPI field
is unique per port. The patchset resolves the issue.
Make RTPI be part of se_tpg instead of se_lun. Make it configurable.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Justin Tee <justin.tee@broadcom.com> says:
Update lpfc to revision 14.2.0.11
This patch set contains bug fixes for buffer overflow, resource
management, discovery, and HBA error status handling.
The patches were cut against Martin's 6.3/scsi-queue tree.
Justin Tee (10):
lpfc: Protect against potential lpfc_debugfs_lockstat_write buffer overflow
lpfc: Reorder freeing of various dma buffers and their list removal
lpfc: Fix lockdep warning for rx_monitor lock when unloading driver
lpfc: Record LOGO state with discovery engine even if aborted
lpfc: Defer issuing new PLOGI if received RSCN before completing REG_LOGIN
lpfc: Correct used_rpi count when devloss tmo fires with no recovery
lpfc: Skip waiting for register ready bits when in unrecoverable state
lpfc: Revise lpfc_error_lost_link reason code evaluation logic
lpfc: Update lpfc version to 14.2.0.11
lpfc: Copyright updates for 14.2.0.11 patches
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During tolerance tests that force an HBA to become unresponsive, rmmod
hangs resulting in the inability to remove the driver.
The lpfc_pci_remove_one_s4() routine attempts to submit a clean up mailbox
command via the lpfc_sli4_post_sync_mbox() routine, but ends up waiting
forever for a mailbox register to set its ready bit. Because the HBA is in
an unrecoverable and unresponsive state, the ready bit will never be set.
Create a new routine called lpfc_sli4_unrecoverable_port(), which checks a
port status register's error notification bits.
Use the lpfc_sli4_unrecoverable_port() routine in ready bit check routines
to early return error if port is deemed unrecoverable.
Also, when the lpfc_handle_eratt_s4() handler detects an unrecoverable
state, call the lpfc_sli4_offline_eratt() routine to kick off flushing
outstanding I/O.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230301231626.9621-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A fabric controller can sometimes send an RDP request right before a link
down event. Because of this outstanding RDP request, the driver does not
remove the last reference count on its ndlp causing a potential leak of RPI
resources when devloss tmo fires.
In lpfc_cmpl_els_rsp(), modify the NPIV clause to always allow the
lpfc_drop_node() routine to execute when not registered with SCSI
transport.
This relaxes the contraint that an NPIV ndlp must be in a specific state in
order to call lpfc_drop node. Logic is revised such that the
lpfc_drop_node() routine is always called to ensure the last ndlp decrement
occurs.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230301231626.9621-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When mapped to a target with multiple virtual ports, a link bounce
sometimes results in unsuccessful rediscovery of all of the target's
virtual ports. This is because a succession of repeat RSCNs for the
virtual target ports leaves ndlps in the REG_LOGIN state with the
NLP_REG_LOGIN_SEND flag set. With NLP_REG_LOGIN_SEND set, during the next
PLOGI, the driver will UNREG_RPI. When UNREG_RPI is processed, the driver
can be in the middle of PRLI_ISSUE or MAPPED state resulting in an illegal
state transition by the discovery engine and stalling.
Fix by calling the discovery state machine with DEVICE_RECOVERY event
during RSCN processing. This will set the NLP_IGNR_REG_CMPL bit and
prevent the old REG_LOGIN state from advancing. Then for the new PLOGI
issue, add the check for the NLP_IGNR_REG_CMPL bit to delay issuing the new
PLOGI until the queued REG_LOGIN and UNREG_LOGIN have been processed.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230301231626.9621-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A target vendor array reboot in P2P topology can sometimes result in
unsuccessful rediscovery.
Rework the lpfc_cmpl_els_logo() routine such that when the LOGO completes
as a failure because of driver abort, the LOGO state is still recorded with
the discovery state machine.
This is a small rework to set LOGO completion without forcing a device
removal state change.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230301231626.9621-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lockdep enabled kernels report a theoretical deadlock state where the
cmf_timer interrupt occurs while the rx_monitor ring is being destroyed.
During rmmod, the cmf_timer is cancelled prior to the
lpfc_rx_monitor_destroy_ring call. This actually eliminates the need to
take the rx_monitor ring lock in lpfc_rx_monitor_destroy_ring. Thus, just
remove lock/unlock of rx_monitor in lpfc_rx_monitor_destroy_ring.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230301231626.9621-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A static code analysis tool flagged the possibility of buffer overflow when
using copy_from_user() for a debugfs entry.
Currently, it is possible that copy_from_user() copies more bytes than what
would fit in the mybuf char array. Add a min() restriction check between
sizeof(mybuf) - 1 and nbytes passed from the userspace buffer to protect
against buffer overflow.
Link: https://lore.kernel.org/r/20230301231626.9621-2-justintee8345@gmail.com
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Like commit c4f135d643 ("workqueue: Wrap flush_workqueue() using a
macro") says, flush_scheduled_work() is dangerous and will be forbidden.
Commit 4d4109d0eb ("[SCSI] mpt fusion: Power Management fixes for MPT SAS
PCI-E controllers") added flush_scheduled_work() call into
mptscsih_suspend(). As of commit 4d4109d0eb, there were several
schedule{,_delayed}_work() calls where flush_scheduled_work() from
mptscsih_suspend() meant to wait for completion. However, which work items
this flush_scheduled_work() call was for was not explained.
Then, schedule_work("struct mptsas_hotplug_event"->work) and
schedule_work(MPT_ADAPTER->sas_persist_task) have been removed by commit
3eb0822c67 ("[SCSI] mpt fusion: Firmware event implementation using
seperate WorkQueue"), and schedule_work("struct
mptsas_send_discovery_event"->work) has been removed by commit f9c34022ea
("[SCSI] mpt fusion: SAS topology scan changes, expander events").
There still remains schedule_work("struct work_queue_wrapper"->work) call
in mptspi.c and schedule_delayed_work("struct mpt_lan_priv"->work) call in
mptlan.c , but I guess that these are not work items which commit
4d4109d0eb meant to wait for completion because these are not per
MPT_ADAPTER work items. If my guess is correct, we no longer need to call
flush_scheduled_work() from mptscsih_suspend().
Link: https://lore.kernel.org/r/0b9ebcfb-b647-1381-0653-b54528a64a86@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit aa47a7c215 ("lib/cpumask: deprecate nr_cpumask_bits") resulted
in the cpumask operations potentially becoming hugely less efficient,
because suddenly the cpumask was always considered to be variable-sized.
The optimization was then later added back in a limited form by commit
6f9c07be9d ("lib/cpumask: add FORCE_NR_CPUS config option"), but that
FORCE_NR_CPUS option is not useful in a generic kernel and more of a
special case for embedded situations with fixed hardware.
Instead, just re-introduce the optimization, with some changes.
Instead of depending on CPUMASK_OFFSTACK being false, and then always
using the full constant cpumask width, this introduces three different
cpumask "sizes":
- the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids.
This is used for situations where we should use the exact size.
- the "small" size (small_cpumask_bits) is the NR_CPUS constant if it
fits in a single word and the bitmap operations thus end up able
to trigger the "small_const_nbits()" optimizations.
This is used for the operations that have optimized single-word
cases that get inlined, notably the bit find and scanning functions.
- the "large" size (large_cpumask_bits) is the NR_CPUS constant if it
is an sufficiently small constant that makes simple "copy" and
"clear" operations more efficient.
This is arbitrarily set at four words or less.
As a an example of this situation, without this fixed size optimization,
cpumask_clear() will generate code like
movl nr_cpu_ids(%rip), %edx
addq $63, %rdx
shrq $3, %rdx
andl $-8, %edx
callq memset@PLT
on x86-64, because it would calculate the "exact" number of longwords
that need to be cleared.
In contrast, with this patch, using a MAX_CPU of 64 (which is quite a
reasonable value to use), the above becomes a single
movq $0,cpumask
instruction instead, because instead of caring to figure out exactly how
many CPU's the system has, it just knows that the cpumask will be a
single word and can just clear it all.
Note that this does end up tightening the rules a bit from the original
version in another way: operations that set bits in the cpumask are now
limited to the actual nr_cpu_ids limit, whereas we used to do the
nr_cpumask_bits thing almost everywhere in the cpumask code.
But if you just clear bits, or scan for bits, we can use the simpler
compile-time constants.
In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()'
which were not useful, and which fundamentally have to be limited to
'nr_cpu_ids'. Better remove them now than have somebody introduce use
of them later.
Of course, on x86-64 with MAXSMP there is no sane small compile-time
constant for the cpumask sizes, and we end up using the actual CPU bits,
and will generate the above kind of horrors regardless. Please don't
use MAXSMP unless you really expect to have machines with thousands of
cores.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull crypto fix from Herbert Xu:
"Fix a regression in the caam driver"
* tag 'v6.3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - Fix edesc/iv ordering mixup
Pull x86 updates from Thomas Gleixner:
"A small set of updates for x86:
- Return -EIO instead of success when the certificate buffer for SEV
guests is not large enough
- Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared
on return to userspace for performance reasons, but the leaves user
space vulnerable to cross-thread attacks which STIBP prevents.
Update the documentation accordingly"
* tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt/sev-guest: Return -EIO if certificate buffer is not large enough
Documentation/hw-vuln: Document the interaction between IBRS and STIBP
x86/speculation: Allow enabling STIBP with legacy IBRS
Pull irq updates from Thomas Gleixner:
"A set of updates for the interrupt susbsystem:
- Prevent possible NULL pointer derefences in
irq_data_get_affinity_mask() and irq_domain_create_hierarchy()
- Take the per device MSI lock before invoking code which relies on
it being hold
- Make sure that MSI descriptors are unreferenced before freeing
them. This was overlooked when the platform MSI code was converted
to use core infrastructure and results in a fals positive warning
- Remove dead code in the MSI subsystem
- Clarify the documentation for pci_msix_free_irq()
- More kobj_type constification"
* tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced
genirq/msi: Drop dead domain name assignment
irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy()
genirq/irqdesc: Make kobj_type structures constant
PCI/MSI: Clarify usage of pci_msix_free_irq()
genirq/msi: Take the per-device MSI lock before validating the control structure
genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()
Pull vfs update from Al Viro:
"Adding Christian Brauner as VFS co-maintainer"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Adding VFS co-maintainer
Pull VM_FAULT_RETRY fixes from Al Viro:
"Some of the page fault handlers do not deal with the following case
correctly:
- handle_mm_fault() has returned VM_FAULT_RETRY
- there is a pending fatal signal
- fault had happened in kernel mode
Correct action in such case is not "return unconditionally" - fatal
signals are handled only upon return to userland and something like
copy_to_user() would end up retrying the faulting instruction and
triggering the same fault again and again.
What we need to do in such case is to make the caller to treat that as
failed uaccess attempt - handle exception if there is an exception
handler for faulting instruction or oops if there isn't one.
Over the years some architectures had been fixed and now are handling
that case properly; some still do not. This series should fix the
remaining ones.
Status:
- m68k, riscv, hexagon, parisc: tested/acked by maintainers.
- alpha, sparc32, sparc64: tested locally - bug has been reproduced
on the unpatched kernel and verified to be fixed by this series.
- ia64, microblaze, nios2, openrisc: build, but otherwise completely
untested"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
openrisc: fix livelock in uaccess
nios2: fix livelock in uaccess
microblaze: fix livelock in uaccess
ia64: fix livelock in uaccess
sparc: fix livelock in uaccess
alpha: fix livelock in uaccess
parisc: fix livelock in uaccess
hexagon: fix livelock in uaccess
riscv: fix livelock in uaccess
m68k: fix livelock in uaccess
include/linux/compiler-intel.h had no update in the past 3 years.
We often forget about the third C compiler to build the kernel.
For example, commit a0a12c3ed0 ("asm goto: eradicate CC_HAS_ASM_GOTO")
only mentioned GCC and Clang.
init/Kconfig defines CC_IS_GCC and CC_IS_CLANG but not CC_IS_ICC,
and nobody has reported any issue.
I guess the Intel Compiler support is broken, and nobody is caring
about it.
Harald Arnesen pointed out ICC (classic Intel C/C++ compiler) is
deprecated:
$ icc -v
icc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is
deprecated and will be removed from product release in the second half
of 2023. The Intel(R) oneAPI DPC++/C++ Compiler (ICX) is the recommended
compiler moving forward. Please transition to use this compiler. Use
'-diag-disable=10441' to disable this message.
icc version 2021.7.0 (gcc version 12.1.0 compatibility)
Arnd Bergmann provided a link to the article, "Intel C/C++ compilers
complete adoption of LLVM".
lib/zstd/common/compiler.h and lib/zstd/compress/zstd_fast.c were kept
untouched for better sync with https://github.com/facebook/zstd
Link: https://www.intel.com/content/www/us/en/developer/articles/technical/adoption-of-llvm-complete-icx.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull more i2c updates from Wolfram Sang:
"Some improvements/fixes for the newly added GXP driver and a Kconfig
dependency fix"
* tag 'i2c-for-6.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: gxp: fix an error code in probe
i2c: gxp: return proper error on address NACK
i2c: gxp: remove "empty" switch statement
i2c: Disable I2C_APPLE when I2C_PASEMI is a builtin
The migration code ends up temporarily stashing information of the wrong
type in unused fields of the newly allocated destination folio. That
all works fine, but gcc does complain about the pointer type mis-use:
mm/migrate.c: In function ‘__migrate_folio_extract’:
mm/migrate.c:1050:20: note: randstruct: casting between randomized structure pointer types (ssa): ‘struct anon_vma’ and ‘struct address_space’
1050 | *anon_vmap = (void *)dst->mapping;
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
and gcc is actually right to complain since it really doesn't understand
that this is a very temporary special case where this is ok.
This could be fixed in different ways by just obfuscating the assignment
sufficiently that gcc doesn't see what is going on, but the truly
"proper C" way to do this is by explicitly using a union.
Using unions for type conversions like this is normally hugely ugly and
syntactically nasty, but this really is one of the few cases where we
want to make it clear that we're not doing type conversion, we're really
re-using the value bit-for-bit just using another type.
IOW, this should not become a common pattern, but in this one case using
that odd union is probably the best way to document to the compiler what
is conceptually going on here.
[ Side note: there are valid cases where we convert pointers to other
pointer types, notably the whole "folio vs page" situation, where the
types actually have fundamental commonalities.
The fact that the gcc note is limited to just randomized structures
means that we don't see equivalent warnings for those cases, but it
migth also mean that we miss other cases where we do play these kinds
of dodgy games, and this kind of explicit conversion might be a good
idea. ]
I verified that at least for an allmodconfig build on x86-64, this
generates the exact same code, apart from line numbers and assembler
comment changes.
Fixes: 64c8902ed4 ("migrate_pages: split unmap_and_move() to _unmap() and _move()")
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull misc fixes from Andrew Morton:
"17 hotfixes.
Eight are for MM and seven are for other parts of the kernel. Seven
are cc:stable and eight address post-6.3 issues or were judged
unsuitable for -stable backporting"
* tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: map Dikshita Agarwal's old address to his current one
mailmap: map Vikash Garodia's old address to his current one
fs/cramfs/inode.c: initialize file_ra_state
fs: hfsplus: fix UAF issue in hfsplus_put_super
panic: fix the panic_print NMI backtrace setting
lib: parser: update documentation for match_NUMBER functions
kasan, x86: don't rename memintrinsics in uninstrumented files
kasan: test: fix test for new meminstrinsic instrumentation
kasan: treat meminstrinsic as builtins in uninstrumented files
kasan: emit different calls for instrumentable memintrinsics
ocfs2: fix non-auto defrag path not working issue
ocfs2: fix defrag path triggering jbd2 ASSERT
mailmap: map Georgi Djakov's old Linaro address to his current one
mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON
lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSH
mm/damon/paddr: fix missing folio_put()
mm/mremap: fix dup_anon_vma() in vma_merge() case 4
